Touch screen function manual

Right & leftscroll key

Room selecting key, Maximal quantity 50.

Controlling Target icon

Room background

image

brightness adjustment button

Scene selection

System setting

Intelligent Control Terminal –Touch screen setting

Setting interface

Click Setting button

Key in password and confirm, (default

Password: 000000)

Setting interface

Timer setup

System setup

Room setting

Intelligent Control Terminal –Touch screen setting

Touch screen IP address setting

Step 1 Step 2

Double click

Step 3 Step 4

① Click IP address

② Bring up the soft keyboard, enter the value you want to modify(Under the

computer subnet.)

③ Click OK

Restart after quit and power off

Touch screen IP address setting

If touch screen software do not run automatically after restart, then please run this command ：

“My computer/NandFlash/Touch1/ Touch.exe” to run touch screen software, and select “Auto-start ”mode in system setting.

Make the IP address come into effect by click HANG 。

Touch screen programming

1 、 In the menu bar select "touch screen", click the touch screen icon in the drop-down menu

Touc

hSc

reen

2 、 Select file and open the picture of the new room (the best size of the picture 624*377)

Touc

hSc

reen

3 、 Select document

4 、 Open

Touc

hSc

reen

5 、 Right click to the new added room for edit a new room name. 。

Touc

hSc

reen

6 、 1). Click to the Icon that you want to add2). Add the Icon by click to the background image 3). Click black to the icon to cancel adding operation

7 、 Drag the Icon to the place you want.

8 、 You could select Set the attribute of the current object or Set the attribute of all the objects of the current room by right click the icon

Touc

hSc

reen

9 、 Setting the selected icon remarks, channel, start time and end time.

10 、 Save setting.

Touc

hSc

reen

11 、 After set up for each Icon, move the cursor to the icon, and you can see all detail settings.

12 、 Click “Scene” button ， and setting scene information

Touc

hSc

reen

Touc

hSc

reen

Tip ： The relationship between "the current room scenes information" and touch screen display shown in red frame figure.

Tip ： For buttons in the right screen, click to open, then is off, remarks can be set separately 。

14 、 Set each key type, select "Scene on" (only the implementation of target on), " scene off " (only the implementation of target off), the scene on / off (executable target on and off , that is, click to open, then click off).

13 、 Click “Type” button

15 、 Save

Touc

hSc

reen

17 、 Set "On" remarks and "Off" remarks for each button. Note: You must enter all six buttons "on" and "off" remarks, or it can not be saved. In addition, when the key type is "scene On", there only display the "On" remarks, "Off" remarks can not be displayed.

16 、 Click “Remarks” Button

Touc

hSc

reen

Add control objective for each key, please note that, target can be in room target (ie add all the icons target of the room background image, the type of target only for the "Channel"), or target outside this room (External, such as dimming modules, switch modules and other equipment that have been programmed (scene or sequence) the target information).

Touc

hSc

reen

18 、 Add

19 、 Select control target of the room,.

20 、 Click“OK”

Adding room target

Touc

hSc

reen

21 、 Click on "Edit" to set the parameters for each target

Tip ： right-click to delete items

Touc

hSc

reen

22 、 Setting parameters for each channel, such as brightness, running time.

23 、 Save

Touc

hSc

reen

24 、 Click to add

Add target for other room

25 、 Input target number, then add.

Touc

hSc

reen

25 、 Edit parameters for each target 。

26 、 Setup target parameters ， such as: subnet ID ， equipment ID, type and so on.

27 、 Save

Touc

hSc

reen

28 、 Quit setting

Touc

hSc

reen

29 、 Upload to touch screen.

Touc

hSc

reen

30 、 Select touch screen IP address, you can setup a new one if can not found in the list.

Touc

hSc

reen

31 、 Click the "Connect / Disconnect", when connection is built, means uploading can be proceeded.

32 、 Select the room to upload

Touc

hSc

reen

33. Start uploading

34 、 Confirm to finish uploading.