Embed Size (px)
Citation preview
EMAIL [email protected]
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185 99
TOWING
WE’LL GIVE YOU SOMETHING TO HOLD ON TO… EQUIPMENT FOR EMERGENCY TOWING.
WE OFFER A COMPLETE STOCK OF EQUIPMENT FOR EMERGENCY TOWING ARRANGEMENTS, SUCH AS,
SMIT TOWING BRACKETS, PANAMA CHOCKS, CHAFING CHAINS, SEA-LINK TOWING SHACKLES AND
SEA-LINK TOWING PLATES.
SMIT BRACKET PANAMA CHOCK
CHAIN
Towing
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185100
TOWING
TOW
ING
SMIT BRACKET
Hole In Plate
Pin
80
129125
84
30
3040 40
45
6
6
3015
40
12
KEY
SECTION A-A
28
32
50Ø25
Slot Welds75
15
210
525
20
290
100
120
PinØ75x30
30
30
6
3020
20
60
60
Ø40x12
Hole For Key
22015
10
28 30
2
8175
Min
60
Ø200
600
300
12550
45°
A A
45°
625
R=110
DECK UNDERNEATH TO BE REINFORCED IF NECESSARY STARBOARD CONNECTION IS DRAWN, PORT CONNECTION IS REFLECTED IMAGE.
APPROX. WEIGHT 195 KG EACH
AT LEAST THIS PART OF BOLT AND HOLES TO BE MACHINED
WITH ABS CERTIFICATION
SMALL SIZESWL 100 TON
CONNECTION FOR 2-3/4” - 3” TOWING CHAIN
EMAIL [email protected]
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185 101
TOWING
TOWING
800
370
350
150
Ø25
DETAIL A DETAIL B
50
50 50
380
45
25120
150
295
100
225 25
15110
Det. B
Det. A50
30
75
2
55
90
200
160
6
3518
10
7
7
6 30 243
50
5050
30
25
35
35
35
650400
40x12
90
110
170
To Be Welded to Deck
Hole To FitKey Easily
3 35 5
A
SMIT BRACKET
DECK UNDERNEATH TO BE REINFORCED IF NECESSARY STARBOARD CONNECTION IS DRAWN, PORT CONNECTION IS REFLECTED IMAGE.
APPROX. WEIGHT 375 KG EACH
AT LEAST THIS PART OF BOLT AND HOLES TO BE MACHINED
LARGE SIZESWL 200 TON
CONNECTION FOR 3-1/4” TOWING CHAIN
WITH ABS CERTIFICATION
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185102
TOWING
TOW
ING
SEA-LINK HEAVY LIFT INDUSTRIAL ANDMARINE TOWING SHACKLES
(MADE WITH PRIDE IN THE USA)
CHAIN PATTERN — REGULAR JAW
ANCHOR PATTERN — REGULAR JAW
SIZE (A)
WORKING LOAD
LIMIT IN TONS
PINDIAM. IN INCHES
(B)
JAW WIDTHINCHES
(C)
DIMENSIONS (INCHES) APPROX.
WT. EACH IN POUNDSD F
1-1/2 31 1-3/4 2-3/8 5-1/2 3-1/2 19
1-3/4 41 2 2-7/8 6-3/4 4-1/4 22
2 52 2-1/4 3-1/4 7-3/4 4-5/8 36
2-1/4 67 2-1/2 4-1/4 9-1/4 5 62
2-1/2 82 2-3/4 4-1/2 10-1/2 5-3/4 86
2-3/4 104 3 4-1/2 11 6-1/8 110
3 123 3-1/4 5 13 6-1/2 125
3-1/2 150 3-3/4 5-3/4 15 8-1/4 218
4 200 4-1/4 6-1/2 16 9-1/8 310
SIZE (A)
WORKING LOAD
LIMIT IN TONS
PINDIAM. IN INCHES
(B)
JAW WIDTHINCHES
(C)
DIMENSIONS (INCHES) APPROX. WT.
EACH IN POUNDSD E F
1-1/2 31 1-3/4 2-3/8 5-3/4 3-7/8 3-1/2 20
1-3/4 41 2 2-7/8 7 5 4-1/4 23
2 52 2-1/4 3-1/4 7-3/4 5-3/4 4-5/8 41
2-1/4 67 2-1/2 4-1/4 9-1/4 6-1/2 5 67
2-1/2 82 2-3/4 4-1/2 10-1/2 7-1/2 5-3/4 88
2-3/4 104 3 4-1/2 11 7-3/4 6-1/8 112
3 123 3-1/4 5 13 8-1/2 6-1/2 133
3-1/2 150 3-3/4 5-3/4 15 9 8-1/4 250
4 200 4-1/4 6-1/2 16 11 9-1/8 358
JAW TOLERANCE* Shackle Size 1-1/2 - 3 Inches = (+/-.125)* Shackle Size 3-1/2 - 4 Inches = (+/-.250)
REACH TOLERANCE* Shackle Size 1-1/2 - 2-1/2 Inches = (+/-.500)* Shackle Size 2-3/4 - 4 Inches = (+/-.750)
JAW TOLERANCE* Shackle Size 1-1/2 - 3 Inches = (+/-.125)* Shackle Size 3-1/2 - 4 Inches = (+/-.250)
REACH TOLERANCE* Shackle Size 1-1/2 - 2-1/2 Inches = (+/-.500)* Shackle Size 2-3/4 - 4 Inches = (+/-.750)
F
CB
A
D
A
F
D
C
E
BA
A
AVAILABLE IN SINGLE NUT OR DOUBLE NUT PINS.
SAFETY* 5:1 Safety Factor
SAFETY* 5:1 Safety Factor
EMAIL [email protected]
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185 103
TOWING
TOWING
SEA-LINK HEAVY LIFT INDUSTRIAL ANDMARINE TOWING SHACKLES (WIDE JAW)
CHAIN PATTERN — WIDE JAW
ANCHOR PATTERN — WIDE JAW
(MADE WITH PRIDE IN THE USA)
SIZE (A)
WORKING LOAD
LIMIT IN TONS
PINDIAM. IN INCHES
(B)
JAWWIDTHINCHES
(C)
DIMENSIONS (INCHES) APPROX. WT.
EACH IN POUNDSD E F
1-1/2 22 1-3/4 4-3/16 8-1/8 6-1/4 3-1/2 28
1-3/4 30 2 5 9-3/8 6-7/8 4-1/4 40
2 40 2-1/4 5-3/4 10-1/2 8-1/8 4-5/8 55
2-1/4 48 2-1/2 6-1/4 11-1/2 8-7/8 5 75
2-1/2 55 2-3/4 6-1/2 12-3/8 9-3/8 5-3/4 106
2-3/4 68 3 7 12-3/4 9-3/4 6-1/8 138
3 80 3-1/4 7-1/4 13 10 6-1/2 157
3-1/2 120 3-3/4 9-1/4 15-1/2 12-1/4 8-1/4 274
SIZE (A)
WORKING LOAD
LIMIT IN TONS
PIN DIAM. IN INCHES
(B)
JAWWIDTHINCHES
(C)
DIMENSIONS (INCHES) APPROX. WT.
EACH IN POUNDSD F
1-1/2 22 1-3/4 4-3/16 8-1/8 3-1/2 28
1-3/4 30 2 5 9-3/8 4-1/4 45
2 40 2-1/4 5-3/4 10-1/2 4-5/8 60
2-1/4 48 2-1/2 6-1/4 11-1/2 5 71
2-1/2 55 2-3/4 6-1/2 12-3/8 5-3/4 112
2-3/4 68 3 7 12--3/4 6-1/8 127
3 80 3-1/4 7-1/4 13 6-1/2 165
3-1/2 120 3-3/4 9-1/4 15-1/2 8-1/4 278
JAW TOLERANCE* Shackle Size 1-1/2 - 3 Inches = (+/-.125)* Shackle Size 3-1/2 Inches = (+/-.250)
REACH TOLERANCE* Shackle Size 1-1/2 - 2-1/2 Inches = (+/-.500)* Shackle Size 2-3/4 - 3-1/2 Inches = (+/-.750)
JAW TOLERANCE* Shackle Size 1-1/2 - 3 Inches = (+/-.125)* Shackle Size 3-1/2 Inches = (+/-.250)
REACH TOLERANCE* Shackle Size 1-1/2 - 2-1/2 Inches = (+/-.500)* Shackle Size 2-3/4 - 3-1/2 Inches = (+/-.750)
D
CB
A
F
F
E
CB
A
D
A
A
AVAILABLE IN SINGLE NUT OR DOUBLE NUT PINS.
SAFETY* 5:1 Safety Factor
SAFETY* 5:1 Safety Factor
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185104
TOWING
TOW
ING
6”
R 1”
5-1/2”
R 2-1/2”
R 6-7/32”
R4
R 4”3”
23”7” 7”
7”
R 2-1/2”
R 1-1/2”
R 1-1/2”
2-7/8”
2-3/8”3-1/4”
6-1/2”13-5/8”
22-1/2”
1-3/8”
1-1/8”
R 2-1/4”
2-1/4”
2”12”
10”
10”
4”
10” 31”
4”
3-5/8”4-5/16”
8-1/4”18-3/4”31”
R 6”
R 2”
R 2”
16”
17-1/2”
5-3/8”
3-1/2” 4-3/4”
TOW PLATE SPECIFICATIONS
NO. 1 NO. 2 NO. 3
SHACKLE SIZES 1-1/2” - 2” 2-1/4” - 3” 3-1/2” - 4”
DIMENSIONS 17-1/2” x 16” 22-1/2” x 23” 31” x 31”
WEIGHT 75 202 485
PROOF TEST 300,000 485,000 624,000
SEA-LINK TOW PLATES
All dimensions in inches and pounds unless otherwise indicated.
NUMBER 2 NUMBER 3
NUMBER 1
Approximate dimensions shown above. Contact us for specific dimensions, as they may differ between manufacturers.
WITH ABS CERTIFICATION
EMAIL [email protected]
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185 105
TOWING
TOWING
330.0Ø91.0
R61.0
R74.0
441.
0
Ø87.0
619.
0
R148.0
+3.80
+8.30
+3.80
+11.
40
(76MM) PEAR SHAPED RING
3» (76mm) Pear Shaped Ring ABS CertifiedNotes:1 Weight 160lbs2. Proof Load 3066.4 kN3. Break Load 4621.4 kN
WITH ABS CERTIFICATION
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185106
TOWING
TOW
ING
TOWING BRIDAL ASSEMBLY
1. SEA-LINK TOWING SHACKLE
2. SEA-LINK TOWING PLATE
3. STUD LINK ANCHOR CHAIN / G3
3. Stud Link Anchor Chain
1. Shackle
2. Tow Plate
1. Shackle
3. Stud Link Anchor Chain
3. Stud Link
Anchor Chain
EMAIL [email protected]
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185 107
TOWING
TOWING
DISK TOWING HOOK
WEIGHT (KG)
TESTLOAD(KN)
S.W.L. (KN) B B1 C D D1 H L L1 L2 R R1 R2 T
TYPE 18.25 380 500 250 182 - 80 309 48 - 1115 915 200 75 85 - 180
TYPE 30.45 450 900 450 232 - 100 323 35 - 1190 940 250 75 115 - 200
TYPE 50.65 715 1300 650 262 - 110 380 90 - 1340 1090 250 87.50 125 - 225
TYPE 70.100 1135 2000 1000 292 - 135 490 40 - 1615 1325 290 87.50 140 - 270
D1L1
D
R
Grease Nipples
L
C
T
L2
B
R1
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185108
TOWING
TOW
ING
PUSH-PULL RATCHETSFOR CONSTRUCTION AND INDUSTRIAL
WORKBOATS… BARGES… CONTAINERSHIP LASHINGS
EMAIL [email protected]
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185 109
TOWING
TOWING
B
KA
3 4
H J
7
VERTICAL & HORIZONTAL LASHINGS
ANGLE SHANK PELICAN HOOK ASSEMBLIES
SIZE (INCHES) DIMENSIONS (INCHES) MINIMUM
BREAKING STRENGTH
(TONS)A B H J K
1-1/8 6-1/2 3-5/8 1-5/8 7-1/2 3-3/8 25
1-3/8 8 4 1 6 3-1/4 45
This cutaway barrel picture explains one of the differences between the superior Anchor Marine Ratchet and the common. The Anchor Marine ratchet barrel is made from cold-drawn seamless steel tubing instead of welded pipe. It’s 50% stronger and provides a lighter ratchet. Anchor Marine ratchet barrels are made for adjustment ranges from 6’’ to 60’’, and for screw diameters (Acme or National Coarse) from 1/2’’ to 2-1/2’’.
The Anchor Marine Double-Acting Push-Pull Handles have a spring-loaded pawl that assures constant engagement of the pawl in the ratchet sheel (See cutaway illustration). This handle can be used overhead and the pawl will always be in position, which makes it ideal for construction and shipyard uses. Double-acting handles are available in the same sizes and styles as the other Anchor Marine Handles.
RATCHET BARREL
DOUBLE-ACTING HANDLES
ANGLE-SHANK PELICAN HOOK ASSEMBLY DIMENSIONS AND LOADING
3 - Pelican Hook 7 - Angle Shank Jaw
4 - Keeper Link
WWW.ANCHORMARINEHOUSTON.COMTOLL FREE
1 (800) 233-8014HOUSTON
(713) 644-1183FAX
(713) 644-1185110
TOWING
TOW
ING
CUSTOM DESIGN YOUR OWN PUSH-PULL RACHETS
ANGLE SHANK PELICAN HOOK ASSEMBLY
JAW WITH LOCKNUT
RATCHET AND BARREL
ONE PIECE SPRING LOADED HANDLE
WELDED LINK PELICAN HOOK ASSEMBLE
WELDED LINK AND HOOK
SWIVEL OR THREADED SHANK HOOK
EYE AND SHACKLE EYE AND LINK EYE STUB
HAND SHEEL VICE TYPE
3-PIECE HANDLEALL-STEEL HANDLE
SHACKLE-TYPE PELICAN HOOK ASSEMBLY
If any of the ratchets shown on previous pages do not meet your needs, here’s how you can tailor a ratchet for your own application.Beginning with the plain threaded barrel, choose the diameter to provide strength you need and the length for the takeup you require.Next, decide which of the five handles shown applies best. Then select by name the two end fittings from the eleven types shown.Select the amount of work load in pounds or tons you anticipate and the number of ratchets needed. We will send you a quotation promptly.
JAW
