TP 275 MOBILE

GeneralMax. wood diameter: 275 mmAdjustable chip size: YesChip size: 6 - 16 mmEngine power: 74 hpFuel type: DieselMax. capacity (wood chip per hour): 25 m3/hourWeight: 1900 kgTow bar: NoTP SERVICEBOX: Yes3 YEAR TP WARRANTY: Yes

Infeed sectionHydraulic system: IntegratedOperation: Horizontal funnel with yellow safety bar

for forward, return and stop of feedrollers

Tip up funnel: YesInfeed opening, height: 275 mmInfeed opening, width: 275 mmFunnel opening, height (inside measure): 876 mmFunnel opening, width (inside measure): 1102 mmInfeed position: Parallel to driving directionFeed rollers: 2Feed roller position: VerticalFeed roller diameter: 275 mm

Feed roller pretension: 3 springs 8 mmFeed roller drive: 2 x hydraulic in parallelHydraulic oil capacity: 28 litresInfeed speed (maximum): 32 m/minHydraulic pump: Fixed gearwheel pumpBio-degradable hydraulic oil: Optional

Chipping systemChipping principle: Disc chipperChipping angle: 90 degreesTP OPTICUT: YesTP TWIN DISC: YesNumber of blades/knives: 4Cuts per round: 2Blade/Knive gauge - minimum: 16 mmBlade/Knive gauge - maximum: 16 mmRotor speed: 1370 rpmRotor diameter: 835 mmRotor weight: 193 kgTransmission: Belt driveAnvil/counter steel - horizontal: 1 (Hardox)Anvil/counter steel - vertical: 1 (Hardox)Replaceable tub plate: YesTP CHIP KIT: OptionalTub plate: Yes

TrailerDrawbar make: ALKOHeight adjustable drawbar: OptionalAxle make: ALKONumber of axles: 1Max. axle load (total): 1900 kgOverrunning brake system: YesTyre size: 205/R14Max speed: 140 km/h

Trailer - tandemChipping unit on turntable: YesNumber of axles: 2Drawbar make: ALKOHeight adjustable drawbar: OptionalMax. axle load (total): 2200 kgOverrunning brake system: YesTyre size: 195/R13Max speed: 140 km/h

Discharge systemStandard discharge spout: TurnableRotation of discharge spout: 270 degreesVertical extended spout 0,35m: NoHinged discharge spout: NoHorizontal extended spout 1,0m: NoHorizontal extended spout 1,5m: NoTP VARIO SPOUT: YesVertical extended spout 0,5m: No

No-stress controlNo-stress control: TP NAVIGATORDisplays feed roller rotations: YesDisplays rotor rotations: YesTimer for work hours (can be reset): YesTimer for total work hours: Yes

DimensionsFunnel height (fixed drawbar): 699 mmFunnel height (height-adjustable drawbar): 781 mmFunnel height (turntable): 827 mmHeight (operation - height-adjustable drawbar): 2643 - 3312 mmHeight (operation - turntable version): 2689 - 3358 mmHeight (operation - with fixed drawbar): 2560 - 3230 mmHeight (transport - height-adjustable drawbar): 2398 mmHeight (transport - turntable version): 2444 mmHeight (transport - with fixed drawbar): 2315 mmLength (operation - fixed drawbar - Turntable): 4966 mmLength (operation - height-adjustable drawbar -Turntable):

5273 mm

Length (operation - height-adjustable drawbar): 5267 mmLength (Operation - with fixed drawbar): 4801 mmLength (transport - fixed drawbar - turntableversion):

4369 mm

Length (transport - height-adjustable drawbar -turntable version):

4675 mm

Length (transport - height-adjustable drawbar): 4669 mmLength (transport - with fixed drawbar): 4203 mmWidth (fixed drawbar): 1772 mmWidth (height-adjustable drawbar): 1802 mmWidth (turntable version): 1775 mm

Accessories/UpgradesSpare wheel: Mounted unter the chipperTP CHIP KIT: For uniform biomass chip quality: Sliver

breakers type A with 2-fingers (max.opening = 50 x 42 mm) and cover insideupper routing house

Bio oil: Mounted unter the chipper