Tractor Implement Specialists - Farm Implements Australia Implements... · Farm Implements P/L reserves the right to change design, speciﬁ cation and price without notice. Prices

Tractor Implement Specialists

Price List September 2015

Notes

Table of ContentsKanga Mini Range Rotary Cutter .................................. 2

Kanga S Range Rotary Cutter ....................................... 3

Kanga M Range Rotary Cutter ...................................... 4

Kanga H Range Rotary Cutter ...................................... 5

Kanga 3PL Twin Rotor Rotary Cutter – Light Duty ....... 6

Kanga 3PL Twin Rotor Rotary Cutter – Heavy Duty ..... 7

Kanga 3PL Pasture Topper ........................................... 8

Kanga Trailing Pasture Topper ..................................... 9

Kanga 3PL Tri-Rotor Rotary Cutter ............................ 10

Kanga Mini Range Grader Blade ................................ 11

Kanga S Range Grader Blade ..................................... 11

Kanga M Range Grader Blade .................................... 12

Kanga Multi Clamp Grader Blade ............................... 12

Kanga H Range Grader Blade ..................................... 13

Kanga XH Range Grader Blade ................................... 13

Kanga Mini Range Post Hole Digger .......................... 14

Kanga M Range Post Hole Digger .............................. 14

Kanga H Range Post Hole Digger ............................... 14

Kanga XH Range Post Hole Digger ............................. 15

Kanga Post Hole Digger Augers ................................. 15

Kanga Mini Range Single Tine Ripper ........................ 16

Kanga M Range Single Tine Ripper ............................ 16

Kanga H Range Single Tine Ripper ............................ 16

Kanga M Range 3 Tine Ripper .................................... 17

Kanga H Range 3 Tine Ripper ..................................... 17

Kanga S Tine Cultivator ............................................... 18

Kanga Sub-Soil Cultivator - Tool Bar ......................... 19

Kanga Sub-Soil Cultivator - Tine Options .................. 19

Kanga Tipping Box Carryall ........................................ 20

Kanga Hydraulic Transport Box .................................. 20

Kanga Wood Floor Carryall ......................................... 20

Kanga Jib Crane .......................................................... 21

Kanga Bale Spike ........................................................ 21

Kanga Silage Fork ....................................................... 21

Kanga Adjustable Round Bale Feed Out Fork ............ 22

Kanga Disc Harrow...................................................... 22

Kanga Pasture Harrow Rake....................................... 22

Kanga Combo Harrow ................................................. 23

Kanga Chain Link Drag Harrow .................................. 23

Kanga Box Scraper ...................................................... 24

Kanga Stick Rake ........................................................ 24

Sicma TB Series Flail Mower ...................................... 25

Sicma TMX Series Flail Mulcher ................................. 26

Sicma TR Series Flail Mulcher ................................... 27

Sicma TZF Series (Front/Rear) Flail Mulcher ............ 28

Sicma BH Series Rotary Hoe ...................................... 29

Sicma CS Series Rotary Hoe ....................................... 30

Sicma RM Series Rotary Hoe ...................................... 31

Sicma SPR Series Rotary Hoe .................................... 32

Sicma RG Series Rotary Hoe ...................................... 33

Cosmo 3-PL Spinner Spreader ................................... 34

Cosmo Tow Type Spinner Spreaders .......................... 35

Cosmo Twin Spin Super Spreaders ............................ 36

Cosmo Pendulum Super Spreader ............................. 38

Cosmo 3-PL Cement Mixer ......................................... 40

Sicma Finishing Mower ............................................... 41

www.farmimplements.com.au

T: (03) 9706 5166 F: (03) 9706 5050Email: [email protected]

1

Farm Implements P/L reserves the right to change design, specifi cation and price without notice.Prices are recommended retail (RRP) only and DO NOT include freight.Freight terms are ex-works Dandenong, Victoria.Individual distributors prices may vary.

Farm Implements P/L reserves the right to change design, specifi cation and price without notice.Prices are recommended retail (RRP) only and DO NOT include freight.

Freight terms are ex-works Dandenong, Victoria.Individual distributors prices may vary.

2

Mini Range Rotary Cutter

Deck Material Fully welded 2.5mm top, 5mm side wallsDeck Profi le Folded, ‘clean top’ design, square backDeck Reinforcing 25x8mm full sub-frameGearbox 50hp (540rpm) 1:2.83 ratio with 6 spline input shaftPTO Shaft Series 4 (35hp/26kw), triangular profi le tube, safety covers with patent lever releaseClutch 150mm (6”) 2 plate safety clutchFinish Powder coated baked enamelTower Multi-mount, 65x10mm, double clevis, fl oatingTower Offset Positive locking, multi-mount (centre mount with 150mm (6”) left or right offset) Tower Chain 8mm T80 rated chain (max. load 2000kg)Skids Adjustable skid (20-110mm), 6mm wall, 10mm runner Cutter Bar 90mm bolt together, cuphead blade boltsBlades 8mm stepped down, hardened carbon/chrome (spring steel), replaceable bushLinkage/Mounting Double clevis, category 1 lower linkage, category 1 pins and clipsFront and Rear Chains 6mm front and rear safety chains with wire rope replacement system

100.411 Mini stepped slasher blades (pair)

100.412 Mini Range rotary cutter bolt kit (set of nuts, ‘Plough’ bolts and bushes)

100.413 Mini slasher bolt kit (set of nuts, M16 bolts and bushes). Suit slashers Pre-2008.

Code Description Cutting Width

Overall Width

Weight (kg)

Tip Speed (ft/min)

RRP (inc. GST)

KSMN100 Kanga Mini Range 1000 Rotary Cutter (32850) 1000 3’-4”

1175 3’-11” 180 16803

KSMN120 Kanga Mini Range 1200 Rotary Cutter (32750) 1200 3’-11”

1375 4’-6” 205 19203

Multi mount sliding tower Blade bolt inspection cap Waterproof manual holder Cutter bar

High speed gearbox ensures blade tip speed and qualityof cut is not compromised


3

S Range Rotary Cutter

Deck Material Fully welded 3mm top, 6mm side wallsDeck Profi le Formed, ‘clean top’ design, rounded backDeck Reinforcing 25x12mm full sub-frameGearbox 40hp (540rpm) 1:1.93 ratio with 6 spline input shaftPTO Shaft Series 4 (35hp/26kw), triangular profi le tube, safety covers with patent lever releaseClutch 150mm (6”) 2 plate safety clutchFinish Deck: hot dipped galvanized Other parts: powder coatedTower Multi-mount, 75x12mm, double clevis, fl oatingTower Offset Positive locking multi-mount (centre mount with 200mm (8”) left or right offset)Tower Chain 10mm T80 rated chain (max. load 3000kg)Skids Adjustable skid (35-125mm), 6mm wall, 12mm runnerCutter Bar 100mm bolt together, drive lugs, counter sunk blade boltsBlades Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bushLinkage/Mounting Double clevis, category 1 and 2 lower linkage, category 1 pins and clipsFront and Rear Chains 6mm front and rear safety chains with wire rope replacement system

KSRDW S Range rotary cutter single depth wheel (weighs 56kg) (32200)

100.134 Stepped slasher blades (pair)

100.135 Round back rotary cutter bolt kit (set of nuts, bolts and bushes)

100.136 Old square design slasher bolt kit (set of nuts, bolts and bushes). Suit slashers Pre-2008.


Overall Width

Weight (kg)

Tip Speed (ft/min)

RRP (inc. GST)

KSSR120 Kanga S Range 1200 Rotary Cutter (31000) 1200 3’-11”

1410 4’-8” 250 13119


1556 5’-1” 280 14759


1710 5’-8” 300 16399

Blade bolt inspection cap Blade exclusion zones Waterproof manual holder Countersunk blade boltsMulti mount sliding tower

Optional depth wheel

4



M Range Rotary Cutter

Deck Material Fully welded 4mm top, 8mm side wallsDeck Profi le Formed, ‘clean top’ design, rounded backDeck Reinforcing 32x12mm full sub-frameGearbox 75hp (540rpm) 1:1.93 (1500 and 1800mm) or 1:1.46

(2100mm) ratio with 6 spline input shaftPTO Shaft/Clutch Integral, Series 6 (64hp/48kw), two plate clutch/shaft, patent lever release covers, ‘triangular’ profi le drive tube Finish Deck: hot dipped galvanized Other parts: powder coatedTower Multi-mount, 75x16mm, double clevis, fl oatingTower Offset Positive locking, multi-mount (centre mount with 200mm (8”) left or right offset)Tower Chain 13mm T80 rated chain (max. load 4500kg)Skids Adjustable skid (35-125mm), 6mm wall, 12mm runnerCutter Bar 100mm bolt together, drive lugs, counter sunk blade boltsBlades Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bushLinkage/Mounting Double clevis, category 1 and 2 lower linkage, category 2 pins and clipsFront and Rear Chains 8mm front and rear safety chains with wire rope replacement system

KHRDW XH/H/M Range rotary cutter single depth wheel (weighs 67kg) (25600)





Overall Width

Weight (kg)

Tip Speed (ft/min)

RRP (inc. GST)

KSMR150 Kanga M Range 1500 Rotary Cutter (27000) 1500 4’-11”

1710 5’-8” 390 16399


2010 6’-7” 490 19557


2310 7’-7” 530 17368

Blade bolt inspection cap Blade exclusion zones Waterproof manual holder Countersunk blade boltsMulti mount sliding tower


5

H Range Rotary Cutter

Deck Material Fully welded 5mm top, 10mm side wallsDeck Profi le Formed, ‘clean top’ design, rounded backDeck Reinforcing 32x16mm full sub-frameGearbox 130hp (540rpm) 1:1.92 (1800mm) or 1:1.467 (2100mm) ratio with 20 spline input shaftPTO Shaft/Clutch Intergral, Series 8 (110hp/82kw), two plate clutch/shaft, patent lever release covers, greasable ‘triangular’ profi le tube Finish Deck: hot dipped galvanized. Other parts: powder coated Tower Multi-mount, 90x16mm, double clevis, fl oating Tower Offset Positive locking, multi-mount (centre mount with 200mm (8”) left or right offset)Tower Chain 13mm T80 rated chain (max. load 4500kg)Skids Adjustable skid (65 - 145mm), 8mm wall, 16mm runnerCutter Bar 130mm spring steel, bolt together, drive lugs, counter sunk blade boltsBlades Hardened, carbon/chrome (spring steel), stepped down, twisted, replaceable bushLinkage/Mounting Double clevis, category 2 linkage, pins and clipsFront and Rear Chains 10mm front and rear safety chains with wire rope replacement system

KHRDW XH/H/M Range rotary cutter single depth wheel (weighs 67kg) (25600)




100.180 High tensile bisalloy four (4) blade disc rotor (suit 1800 H/XH cutters) (adds 140kg)

100.170 High tensile bisalloy four (4) blade disc rotor (suit 2100 H/XH cutters) (adds 200kg)

100.185 Upgrade H1800 Cutter Bar (XH Range)

100.186 Upgrade H2100 Cutter Bar (XH Range)

100.187 Upgrade to W2600 PTO Shaft (130hp/97kw)


Overall Width

Weight (kg)

Tip Speed (ft/min)

RRP (inc. GST)

KSHR180 Kanga H Range 1800 Rotary Cutter (22000) 18005’-11”

20346’-8” 610 19557

KSHR210 Kanga H Range 2100 Rotary Cutter (21500) 21006’-11”

23347’-8” 705 17368

Blade bolt inspection cap


Blade exclusion zones Waterproof manual holder Countersunk blade boltsMulti mount sliding tower

Four (4) blade disc rotor


6



3PL Twin Rotor Rotary Cutter - 50hp

Code Description Tractor HP

Cutting Width

Overall Width

Tip Speed (ft/min)

RRP (inc. GST)

KMH50-135 Kanga 1350 (4'-6") Light Duty Twin Rotor Cutter (39400) 20 - 50 1300 4’-3”

1470 4'-10" 11237

KMH50-150 Kanga 1500 (5’-0”) Light Duty Twin Rotor Cutter (39500) 25 - 50 1450 4'-9"

1620 5'-4" 12463

KMH50-180 Kanga 1800 (6’-0”) Light Duty Twin Rotor Cutter (39600) 30 - 50 1750 5’-8”

1920 6’-4” 14733

KMH50-RR Height adjustable rear roller (in lieu of dual wheels)

KMH50-TSD Convert machine to twin side discharge (for vineyards/orchards)

100.411 Mini stepped slasher blades (pair)

100.413 Mini slasher bolt kit (set of two (2) nuts, bolts, bushes)

Deck Material Fully welded 3mm top, 10mm side walls, heavy duty angle/fl at barDeck Profi le Folded, ‘clean top’ design, reinforced linkage pointsGearboxes 1 x 50hp three-way & 2 x 50hp right angle gearboxesPTO Shaft Series 6 (64hp/48kw), triangular tube, safety covers with patent lever releaseClutch 200mm (8”), 2 plate safety clutchDrive Line Direct drive splined shaft (except 1.8m (6’-0”) model which has nylon couplings)Finish High build oxide primer, high quality equipment enamel top coatTower 65x12mm, fl oating, 10mm high tensile chain stays (max. load 3000kg) Skids Adjustable skid (25-100mm), 6mm wall, 12mm runnerCutter Bar Bolt together, drive lugsBlades Hardened, carbon/chrome (spring steel), stepped down, hardened bushLinkage/Mounting Double clevis, category 1 lower linkage, category 1 pins and clipsWheels Solid rubber wheels on 360° turning fork assemblyDischarge Rear discharge is standard model. Side discharge is optional* * Please be advised of additional cost to covert machine to ‘Twin Side Discharge’

This light duty rotary cutter is suitable for smaller horse powered tractors. Its twin rotor design gives people the ability to cut a wider area than would be possible with a traditional unit. Three high speed gear boxes ensure blade tip speed and quality of cut is not compromised. This Twin Rotor Cutter can also be ordered as a ‘twin side discharge’ machine for use in vineyards and orchards.*

7

3PL Twin Rotor Rotary Cutter

Deck Material Fully welded 5mm top, 10mm side walls , heavy duty angle/fl at barDeck Profi le Folded, ‘clean top’ design, reinforced linkage pointsGearboxes 1 x 90hp three-way & 2 x 75hp right angle gearboxesPTO Shaft Series 6 (64hp/48kw), triangular tube, safety covers with patent lever releaseClutch 200mm (8”), 2 plate safety clutch, built in free wheelDrive Line Heavy duty spring cushion couplingsFinish Deck: hot dipped galvanized. Other parts: high quality equipment enamelTower Fully welded, reinforced 8mm plate tower/staysSkids Adjustable skid (25-100mm), 6mm wall, 12mm runnerCutter Bar Bolted spring steel, drive lugsBlades Hardened, spring steel, stepped down, twisted left and right, hardened bushLinkage/Mounting Double clevis, category 2 and 3, category 2 pins and clipsWheels Solid rubber wheels on 360° turning fork assemblyDischarge Rear discharge is standard model. Side discharge is optional* * Please be advised of additional cost to covert machine to ‘Twin Side Discharge’


Overall Width

Tip Speed (ft/min)

RRP (inc. GST)

KMH075-1.8 Kanga 1.8m (5’-11”) Heavy Duty Twin Rotor Cutter (38000) 1800 5’-11”

1960 6'-6" 15119

KMH075-2.1 Kanga 2.1m (6'-11") Heavy Duty Twin Rotor Cutter (38500) 2100 6’-11”

2260 7’-5” 16733

KMH075-2.4 Kanga 2.4m (7’-11”) Heavy Duty Twin Rotor Cutter (39000) 2400 7’-11”

2560 8'-5 19619

KMH130-3.0 Kanga 3.0m (10’-0”) Heavy Duty Twin Rotor Cutter (540 PTO) 130hp (39100) 29209’-7”

312010’-3” 16563

KMH200-3.0 Kanga 3.0mm (10’-0”) Heavy Duty Twin Rotor Cutter (1000 PTO) 200hp (39200) 29209’-7”

312010’-3” 15710

KMH-TSD Convert machine to twin side discharge (for vineyards/orchards)

KMH-FR 75hp heavy duty front roller (each)

KMH-RRM Single rear roller with manual adjustment (in lieu of dual wheels)

KMH-RRH Single rear roller with hydraulic ram, hoses & fi ttings (in lieu of dual wheels)

220.086 Left hand (anti-clockwise) ‘orchard/vineyard’ blade (price per blade)

220.087 Right hand (clockwise) ‘orchard/vineyard’ blade (price per blade)

100.136 Blade bolt kit (set of two (2) nuts, bolts, bushes)

A heavy duty, fully reinforced twin rotor cutter that is ideal for tough operating conditions like roadsides, contacting and general council work. This cutter comes with twin 360° spinning solid wheels and spring steel cutter bars. It can also be ordered as a ‘twin side discharge’ machine for use in vineyards and orchards.*


8




Overall Width

Tip Speed (ft/min)

RRP (inc. GST)

KT090-2.4 Kanga 2400 (8'-0") 90hp (540 PTO) Pasture Topper (33000) 2340 7’-8”

2540 8'-4" 19619

KT130-3.0 Kanga 3000 (10'-0") 130hp (540 PTO) Pasture Topper (34000) 2920 9'-7"

3120 10’-3” 16563

KT200-3.0 Kanga 3000 (10’-0”) 200hp (1000 PTO) Pasture Topper (34500) 2920 9’-7”

3120 10’-3” 15710




Deck Material Fully welded 6mm top, 10mm side wallsDeck Profi le Folded, ‘clean top,’ high open back design, hydraulically operated rear fl apDeck Reinforcing Reinforced, heavy duty, one piece, channel chassis Gearboxes 2.4m (8’-0”) Topper = 1 x 90hp three-way and 2 x 75hp right angle gearboxes 3.0m (10’-0”) Topper = 1 x 130hp three-way and 2 x 130hp right angle gearboxesPTO Shaft 2.4m (8’-0”) Topper = Series 8 (106hp/79kw), triangular tube, patented safety covers 3.0m (10’-0”) Topper = Series W2600 (120hp/90kw), star tube, patented safety coversClutch 2.4m (8’-0”) Topper = 60hp heavy duty, 4 plate safety clutch with built in free-wheel 3.0m (10’-0”) Topper = 150hp heavy duty, 6 plate safety clutch with built in free-wheelDrive Line 2.4m (8’-0”) Topper = Spring cushion couplings 3.0m (10’-0”) Topper = Heavy duty 20 spline spring cushion couplingsFinish Deck: hot dipped galvanized. Other parts: high quality equipment enamelTower Fully welded, reinforced, 10mm plate tower/staysSkids Positive locking, height adjustable skid, 6mm wall, 12mm runnerCutter Bar 2.4m (8’-0”) Topper = 100mm spring steel, bolt together, drive lugs 3.0m (10’-0”) Topper = 130mm spring steel, bolt together, drive lugsBlades Hardened, spring steel, stepped down, twisted left and right, hardened bushLinkage/Mounting Double clevis, category 2 and 3 lower linkage, category 2 pins and clips

3PL Pasture Topper

A 3PL twin rotor machine complete with adjustable skids, spring steel cutter bars, stepped suction blades and an adjustable rear safety fl ap. The Kanga Pasture Topper is an essential tool for dairy farms. With continual use this Pasture Topper will improve the quality and quantity of pasture over time.

Rear anti scalping skid

9

A trailing twin rotor topper with hydraulic height control (front and rear), adjustable skids, spring steel cutter bars, stepped suction blades, pneumatic wheels, wide angle PTO shaft and a rear safety fl ap. This Pasture Topper has been designed for irrigated pastures, and is an essential tool for dairy farms looking to improve the quality and quantity of pastures.

Trailing Pasture Topper


Overall Width

Tip Speed (ft/min)

RRP (inc. GST)

KTT130-3.0 Kanga 3000 (10'-0") 130hp (540 PTO) Trailing Pasture Topper (35000) 2920 9'-7"

3120 10'-3" 16563

KTT200-3.0 Kanga 3000 (10'-0") 200hp (1000 PTO) Trailing Pasture Topper (35500) 2920 9’-7”

3120 10'-3" 15710

KTT130-3.6 Kanga 3600 (12’-0”) 200hp (1000 PTO) Trailing Pasture Topper (36000) 3540 11’-7”

3720 12’-3” 18852




Deck Material Fully welded 6mm top, 10mm side wallsDeck Profi le Folded, ‘clean top,’ high open back design, rear fl apDeck Reinforcing Reinforced, heavy duty, one piece, channel chassis Gearboxes 3.0m (10’-0”) = 1 x 130hp three-way and 2 x 130hp right angle gearboxes 3.6m (12’-0”) = 1 x 200hp three-way and 2 x 200hp right angle gearboxesPTO Shaft Wide angle, Series W2600 (120hp/90kw), star tube, safety covers with patent lever releaseClutch 150hp heavy duty, 6 plate safety clutch with built in free-wheelDrive Line Heavy duty, 20 spline, spring cushion couplingsFinish High build oxide primer, high quality equipment enamel top coatTower Fully welded, reinforced, 10mm plate tower fl oating tow hitch Skids Positive locking, height adjustable, skid, 6mm wall, 12mm runnerCutter Bar 130mm spring steel, bolt together, drive lugsBlades Hardened, spring steel, stepped down, twisted left and right, hardened bushLinkage/Mounting Hydraulically height adjustable tow hitch Wheels Hydraulically height adjustable pneumatic (15-9.00) ‘highway’ implement tyres


10



3PL Tri-Rotor Rotary Cutter

Deck Material Fully welded 6mm top, 10mm side wallsDeck Profi le Folded, ‘clean top’ designGearboxes 130hp model =1 x 150hp four-way and 2 x 130hp right angle gearboxes 200hp model = 1 x 200hp four-way and 2 x 200hp right angle gearboxesPTO Shaft Series W2600 (120hp/90kw), star tube, safety covers with patent lever release Clutch 200hp heavy duty, 6 plate safety clutch with built in free-wheelDrive Line Heavy duty spring cushion couplings with W2600 Series drive shaftsFinish Deck: hot dipped galvanized. Other parts: high quality equipment enamelTower Fully welded, reinforced, 10mm plate tower/staysSkids Positive locking, height adjustable skid, 6mm wall, 12mm runnerCutter Bar Spring steel, bolt together, drive lugsBlades Hardened, spring steel, stepped down, twisted left and right with hardened bushLinkage/Mounting Double clevis, category 2 and 3 lower linkage, category 2 pins and clipsWheels Dual solid rubber wheels on 360° turning fork assemblyDischarge Rear discharge only


Overall Width

Tip Speed (ft/min)

RRP (inc. GST)

KTH130-3.6 Kanga 3600 (12’-0”) 130hp Tri-Rotor Rotary Cutter (540 PTO) (37000) 3520 11'-6"

3720 12’-3” 13119


4620 15'-2" 16373

KTH130-5.4 Kanga 5400 (18’-0”) 130hp Tri-Rotor Rotary Cutter (540 PTO) (37200) 5320 17’-6”

5520 18'-1" 19374


3720 12'-3" 18437


4620 15'-2" 13609


5520 18’-1” 16378

KTHFLEX ‘FLEX’ Modifi cation (for orchards with 'delving' rows)




A heavy duty, galvanised, three (3) rotor, Rotary Cutter designed and manufactured to operate in tough conditions. Standard features include: twin 360° spinning solid wheels, spring steel cutter bars, stepped suction blades, adjustable skids and spring cushion couplings that eliminate shock loads and vibrations between gearboxes.

Mini Range Grader BladeHeadstock Material Welded, reinforced 80x80x4mm RHSMouldboard Pressed 6mm mouldboard with channel reinforcing and 10mm turn tableCutting Edge 150mm heat hardened carbon/chrome (spring steel) reversibleFinish Powder coated baked enamelLinkage/Mounting Double clevis category 1. Supplied with category 1 pins and clipsOffset 3 positions left and right Tilt Using lower linkage pin holes and tractor linkage armsAngle 28 positions over 360°

11

KBDW120 1200mm grader blade depth wheel (45900)

KBDWS S Range grader blade depth wheel (46000)

S Range grader blade

Mini Range adjustable grader blade

S Range Grader BladeHeadstock Material Welded, reinforced 100x100 x4mm RHS Mouldboard Pressed 6mm mouldboard with channel reinforcing and 12mm turn tablesCutting Edge 150mm heat hardened carbon/chrome (spring steel) reversibleFinish Powder coated baked enamel Linkage/Mounting Category 1 and 2 top. Category 1 lower. Both double clevis and supplied with

category 1 pins and clipsOffset 3 positions left and rightTilt Using lower linkage pin holes and tractor linkage armsAngle 28 positions over 360°

Code Description Weight (kg)

Tractor (hp)

RRP (inc. GST)

KB180 Kanga 1800 (6’-0”) S Range Grader Blade (44000) 229 18 - 35


Tractor (hp)

RRP (inc. GST)

KB120 Kanga 1200 (4’-0”) Mini Range Adjustable Grader Blade (45000) 122 18 - 30


12



Multi Clamp Grader BladeHeadstock Material Fully welded and reinforced pipe and RHS constructionMouldboard Pressed 8mm mouldboard with channel reinforcingMovement Via Locking wedges (dog clamps)Cutting Edge 150mm heat hardened carbon/chrome (spring steel) reversibleFinish High build oxide primer with high quality equipment enamel top coatLinkage/Mounting Double clevis category 1 and 2 linkage with category 1 pins and clipsOffset 0-45° in 5° increments left or rightTilt 0-45° in 5° increments left or rightAngle 0-45° in 5° increments left or right


Tractor (hp)

RRP (inc. GST)

KBMC180 Kanga 1800 (6’-0”) Multi (‘DOG’) Clamp Grader Blade (41000) 345 35 - 60

KBMC240 Kanga 2400 (8’-0”) Multi (‘DOG’) Clamp Grader Blade (40000) 385 40 - 70

M Range Grader BladeHeadstock Material Welded, reinforced 100x100x6mm RHSMouldboard Pressed 8mm mouldboard with channel reinforcing and 16mm turn tablesCutting Edge 150mm heat hardened carbon/chrome (spring steel) reversibleFinish Powder coated baked enamelLinkage/Mounting Category 1 and 2 top. Category 1 lower. Both double clevis and supplied

with category 1 pins and clipsOffset 5 positions left and rightTilt Standard model – Using lower linkage pin holes and tractor linkage arms Tilting model – 0-35° left or rightAngle 28 positions over 360°


Tractor (hp)

RRP (inc. GST)

KBM180 Kanga 1800 (6’-0”) M Range Grader Blade (43000) 286 30 - 60

KBM180-TM Kanga 1800 (6’-0”) M Range ‘Tilting’ Grader Blade – Manual (43250) 310 30 - 60

KBM180-TH Kanga 1800 (6’-0”) M Range ‘Tilting’ Grader Blade – Hydraulic (43500) 315 30 - 60

Multi Clamp grader blade

M Range grader blade

KBDWM M Range grader blade depth wheel (46250)

Tilting grader blade

KBDWMC Multi Clamp grader blade depth wheel (46500)

XH Range Grader BladeHeadstock Material 150x150x9mm RHS, fully welded and reinforcedMouldboard 10mm reinforced and gusseted with 20mm turntablesMovement Via 100mm (4”) hydraulic rams complete with hoses and fi ttingsCutting Edge 150mm heat hardened carbon/chrome (spring steel) reversibleFinish High build oxide primer with high quality equipment enamel top coatLinkage/Mounting Double clevis category 2 lower linkage with pins and clipsOffset Variable - Up to 20° left and rightTilt Variable - Up to 30° left and rightAngle Variable - Up to 30° left and right


Tractor (hp)

RRP (inc. GST)

KBXH240 Kanga 2400 (8’-0”) XH Range, 3 Ram Hydraulic Grader Blade (47000) 615 90 - 130

KBXH300 Kanga 3000 (10’-0”) XH Range, 3 Ram Hydraulic Grader Blade (47200) 795 90 - 130

13

H Range Grader BladeHeadstock Material 150x150x5mm RHS, fully welded and reinforcedMouldboard 8mm reinforced and gusseted with 16mm turntablesMovement Via 75mm (3”) hydraulic rams or manual ratchet adjustmentCutting Edge 150mm heat hardened carbon/chrome (spring steel) reversibleFinish High build oxide primer with high quality equipment enamel top coatLinkage/Mounting Double clevis category 2 lower linkage with pins and clipsOffset Variable - up to 20° left and rightTilt Variable - up to 30° left and rightAngle Variable - up to 30° left and right


Tractor (hp)

RRP (inc. GST)

KBH180M Kanga 1800 (6’-0”) H Range, Manual Adjustment Grader Blade (47450) 485 50 - 90

KBH180H Kanga 1800 (6’-0”) H Range, 3 Ram Hydraulic Grader Blade (47400) 500 50 - 90

KBH240M Kanga 2400 (8’-0”) H Range, Manual Adjustment Grader Blade (47350) 515 50 - 90

KBH240H Kanga 2400 (8’-0”) H Range, 3 Ram Hydraulic Grader Blade (47300) 530 50 - 90

H Range with optional depth wheel

KBXHDWM XH Range grader blade manual depth wheel (47500)

KBXHDWH XH Range grader blade hydraulic depth wheel (47600)

KBXHDV XH Range grader blade hydraulic diverter value system (47700)

KBHDWM H Range grader blade manual depth wheel (48100)

KBHDWH H Range grader blade hydraulic depth wheel (48200)

KBHDV H Range grader blade hydraulic diverter value system (48300)

XH Range

Manual Adjustment - ratchet jack with lock nut


14



H Range Post Hole DiggerBoom Profi le Right angle frame in 100x100x6 RHSA Frame Profi le Double clevis ‘A’ frame in 12mm fl at barGearbox 75hp (4:1) with 6 spline input shaft PTO Shaft Series 4 (35hp/26kw), triangular profi le tube and safety covers with patent lever releaseClutch 200mm (8”) 2 plate safety clutchFinish Powder coated baked enamelAugers Sizes from 100mm (4”) to 610mm (24”). Refer page 15


Tractor (hp)

RRP (inc. GST)

KPHD75 Kanga 75hp H Range Post Hole Digger, excluding auger (50000) 159.2 40+

M Range Post Hole DiggerBoom Profi le Right angle frame in 100x100x6 RHSA frame Profi le Double clevis ‘A’ frame in 12mm fl at barGearbox 50hp (3.18:1), 6 spline input shaftPTO Shaft Series 4 (35hp/26kw), triangular profi le tube, safety covers with patent lever releaseClutch 150mm (6”) 2 plate safety clutchFinish Powder coated baked enamelAugers Sizes from 100mm (4”) to 610mm (24”). Refer page 15


Tractor (hp)

RRP (inc. GST)

KPHD50 Kanga 50hp M Range Post Hole Digger, excluding auger (51000) 133.6 30 - 75

Mini Range Post Hole Digger

Boom Profi le Right angle frame in 80x80x4 RHSA Frame Profi le Double clevis ‘A’ frame in 12mm fl at bar Gearbox 35hp (2.92:1) with 6 spline input shaft PTO Shaft Series 4 (35hp/26kw), triangular profi le tube and safety covers with patent lever releaseClutch 150mm (6”) 2 plate safety clutchFinish Powder coated baked enamelAugers Sizes from 100mm (4”) to a maximum 300mm (12”). Refer page 15


Tractor (hp)

RRP (inc. GST)

KPHD35 Kanga 30hp Mini Range Post Hole Digger, excluding auger (52000) 96.1 15 - 35

15

XH Range Post Hole Digger

Post Hole Digger AugersProfi le Agricultural augers suit all ranges of Kanga post hole diggersConstruction Heavy duty 50mm tubing with 6mm fl ightingCutting Head Clockwise double cut with replaceable teeth and pilotHeight 1200mm (48”)Finish High build oxide primer with high quality equipment enamel top coat

Profi le Heavy duty RHS in a dual rail confi gurationA Frame Heavy duty RHS with shear boltsGearbox 50hp (3.18:1) or 75hp (4:1) With 6 spline input shaftPTO Shaft Series 4 (35hp/26kw), triangular profi le tube

and safety covers with patent lever releaseClutch 200mm (8”) 2 plate safety clutch Finish Powder coated baked enamelHydraulics 65mm (2.5”) hydraulic ram complete with hoses and fi ttings


Tractor (hp)

RRP (inc. GST)

KPHD50-XH Kanga 50hp XH Range Post Hole Digger, excluding auger (56000) 206.4 40+

KPHD75-XH Kanga 75hp XH Range Post Hole Digger, excluding auger (55000) 210.5 50+

* Not to be used on Kanga Mini Range Post Hole Diggers.


RRP (inc. GST)

KPHDA04 Kanga 100mm (4”) Auger Only (50700) 13.5




KPHDA15 Kanga 380mm (15”) Auger Only* (50300) 27.2



140.900 Standard dirt tooth (pair)

140.901 Chisel dirt tooth (pair)

140.906 Clockwise auger pilot (sb23 or sb30). Please specify on order.

140.909 Clockwise 100mm (4”) combined auger pilot and digging head


16



M Range Single Tine Ripper


Tractor (hp)

RRP (inc. GST)

KRMRS Kanga M Range Single Tine Ripper (12100) 68 25 - 50

KRPMR Kanga M Range Pipelayer (14250)

Profi le Fully welded, gusseted, RHSLinkage/Mounting Double clevis, category 1 linkage Tines 150x32mm, ‘chamfered’ edgedTine Point Heat hardened, carbon/chrome (spring steel), reversible Finish Powder coated baked enamelMax. Working Depth 500mm (1’-8”)Width 800mm (2’-7”)

H Range Single Tine Ripper


Tractor (hp)

RRP (inc. GST)

KRHRS Kanga H Range Single Tine Ripper (12000) 86 35 - 80

KRPHR Kanga H Range Pipelayer (14000) n/a

Profi le Fully welded, double gusseted heavy duty RHSLinkage/Mounting Double clevis category 1 and 2Tine 150x32mm, ‘chamfered’ edgedTine Point Heat hardened, carbon/chrome (spring steel) reversibleFinish Powder coated baked enamelMax. Working Depth 650mm (2’-2”)Width 850mm (2’-9”)

MINI Range Single Tine RipperProfi le Fully welded, gusseted, RHSLinkage/Mounting Double clevis, category 1 linkageTines 130x25mm, ‘chamfered’ edgedTine Point Heat hardened, carbon/chrome (spring steel), reversibleFinish Powder coated baked enamelMax. Working Depth 350mm (1’-2”)Width 625mm (2’-1”)


Tractor (hp)

RRP (inc. GST)

KRMN Kanga Mini Range Single Tine Ripper (13000) 38 12 - 25

KRPMN Kanga Mini Range Pipelayer (14500) n/a

All single tine rippers can be fi tted with

an optional pipelayer

Optional pipelayer

160.100 Ripper point

160.101 Ripper point bolt set





17

M Range 3 Tine RipperProfi le Fully welded, 100x100x5 RHS tool barLinkage/Mounting Double clevis, category 1 linkageTines Heavy duty,130 x 25mm, chamfered edged, height adjustable tineTine Point Heat hardened, carbon/chrome (spring steel), reversibleFinish Powder coated baked enamelMax. Working Depth 550mm (1’-10”)Width 950mm (3’-2”)


Tractor (hp)

RRP (inc. GST)

KRM3 Kanga M Range 3 Tine Ripper (1100) 112 25 - 45

H Range 3 Tine RipperProfi le Fully welded, 150x150x9mm tool barLinkage/Mounting Double clevis, category 2 linkageTines Heavy duty, 150 x 32mm, chamfered edged, height adjustable tineTine Point Heat hardened, carbon/chrome (spring steel), reversibleFinish Powder coated baked enamelMax. Working Depth 915mm (3’-0”)Width 2000mm (6’-7”)


Tractor (hp)

RRP (inc. GST)

KRH3-M Kanga H Range 3 Tine Ripper – Mild Steel Tines (10000) 285 65 - 90

KRH3-B Kanga H Range 3 Tine Ripper – Bisalloy Tines (10100) 290 65 - 90

H Range

M Range






18



Profi le Heavy duty RHS (5mm), 16mm fl at barLinkage/Mounting Double clevis category 2 and 3 linkage,

category 2 pins and clipType of Tine 10mm x 32mm high tensile ‘S’ tine

with 390mm ground clearancePoint High tensile, reversibleRoller Height adjustable, hubbed and stubbed, twisted pipeFinish High build primer, equipment enamel top coat

Code Description Overall Width* Tractor (hp)

RRP (inc. GST)

KST2.4 Kanga 2400 S Tine (24 Tine) with Crumbler Roller (79000) 2.75m (6’-10”) 25 - 50

KST2.8 Kanga 2800 S Tine (28 Tine) with Crumbler Roller (80000) 3.15m (9’-11”) 30 - 60

KST3.0 Kanga 3000 S Tine (30 Tine) with Crumbler Roller (81000) 3.35m (11-0”) 40 - 80

KST3.2 Kanga 3200 S Tine (32 Tine) with Crumbler Roller (82000) 3.55m (11’-8”) 50+

KSTDDW Dual height control wheels suit Kanga S Tine cultivator (83000)

180.405 105mm (4”) Cultivator ‘sweep’ point**

180.406 150mm (6”) Cultivator ‘sweep’ point**

* Working width (including roller) is 350mm (1’ 2”) less than overall width.** Price is per point, based on supplying ‘sweep’ point in leiu of standand points.

Crumbler roller with stub axle

S Tine Cultivator

19

Sub-Soil Cultivator - Tool Bar

Profi le Fully welded/reinforced 100x100x9mm RHS dual frameLinkage Double clevis, category 2/3 linkage, category 2 pins and clipsFinish High build primer, equipment enamel top coat

Code Description Overall Width

Working Width

# of Tines*

RRP (inc. GST)

KSS180 Kanga 1800 (6’-0”) Sub-Soil Cultivator Tool Bar ONLY (75000) 1800 5’-11”

1700 5’-7” 5

KSS240 Kanga 2400 (8’-0”) Sub-Soil Cultivator Tool Bar ONLY (76000) 2400 7'-11"

2300 7’-7” 7

KSS300 Kanga 3000 (10’-0”) Sub-Soil Cultivator Tool Bar ONLY (77000) 3000 9'-11"

2900 9'-7" 9

KSS360 Kanga 3600 (12’-0”) Sub-Soil Cultivator Tool Bar ONLY (78000) 3600 11’-10

3500 11’-6” 11

KSSDDW Sub Soil cultivator dual depth wheels (78500)

* The number of tines is based on 330mm (13”) spacings. You can fi t more tines, however the more tines, the more tractor horsepower required to operate successfully.

Heavy Duty reinforced dual rail frame allowing customers to customise their Sub-Soil Cultivator with one of the many Kanga tine assemblies.

Code Description Tine Depth**

Type of Protection

Breakout Point

Tractor HP (p/tine)

RRP (inc. GST)

KSS-T24 Kanga 24" Cast Shear Bolt Ripper Tine Only (each) (79100) 610mm 24" Shear Pin 5000kg 10 - 15hp

KSS-T30 Kanga 30” Cast Shear Bolt Ripper Tine Only (each) (79200) 762mm 30" Shear Pin 5000kg 12 - 15hp

KSS-TCP Kanga Stump Jump Chisel Plough Tine Only (each) (79300) 520mm 20” Spring 250 lb/ft

372 kg/m 8 - 10hp

KSS-TRT Kanga ‘Ryan’ Type Spring Tine Only (each) (79400) 660mm 26” Spring 340 lb/ft

506 kg/m 10 - 15hp

** Measured from bottom of the cultivator tool bar including the point and is a guide only. Depth will depend on soil type and conditions.

Sub-Soil Cultivator - Tine OptionsA range of bolt on tine assemblies that can be fi tted to the Kanga Sub-Soil Cultivator tool bar allowing customization for individual application.

Sub-Soil Cultivatorwith ‘Ryan’ spring tine

Sub-Soil Cultivatorwith stump jumpchisel plough tine

Sub-Soil Cultivatorwith cast shear boltripper tine


20



Tipping Box Carryall

Carryalls

Hydraulic Transport Box

Code Description W x H x D (cm)

Max. load (kg)

Weight (kg)

Tractor (hp)

RRP (inc. GST)

KCTB120 Kanga 1.2m Hydraulic Transport Box (99450) 120 x 71 x 37 500 167 (150*) 18 - 40



Code Description W x H x D (cm)

Max. load (kg)

Weight (kg)

Tractor (hp)

RRP (inc. GST)

KCT180 Kanga 1.8m Tipping Box Carryall (99300) 180 x 87 x 51 800 342 (300*) 40 - 80

With back removed

Overview Boxed tipping carryall for light general purpose duties. Removing the rear door converts the implement into tipping carryall. Heat hardened carbon leading edge.Profi le Reinforced plate with heavy duty tipping mechanismFinish Powder coated baked enamelBucket Material 180 model = 6mm plateLinkage 180 model = category 1 and 2

Overview Hydraulically operated transport box/tipping carryall for general purpose duties.Profi le Solid robust contruction with reinforcing at all stress points. Inner ribs reinforce

the bucket fl oor and there is a double acting ram with heavy duty tipping mechanism Removing the rear door converts the implement into tipping carryall. Heat hardened carbon leading edge.

Finish Powder coated baked enamelBucket Material 120 model = 3.5mm plate 160 model = 5mm plate 200 model = 6mm plateLinkage 120 model = category 1 160 model = category 1 and 2 200 model = category 1 and 2

With back removed

* Weight when rear door has been removed.

Wood Floor CarryallProfi le Welded heavy duty RHS/angle frameLinkage/Mounting Category 1 bolt on lower linkage pins and clipWood Floor Bolt in replacable, 25mm kiln dried Tasmanian Oak hard wood boardsFinish Powered coated baked enamel


RRP (inc. GST)

KCWF120 Kanga 1200 (4’ x 3’) Wood Floor Carryall (98000) 53

KCWF150 Kanga 1500 (5’ x 3’) Wood Floor Carryall (98500) 68

KCWF180 Kanga 1800 (6’ x 3’6”) Wood Floor Carryall (99000) 85

* Weight when rear door has been removed.

21

Jib Crane

Code Description Capacity (max.)

Weight (kg)

RRP (inc. GST)

KJCM Kanga Manual JIb Crane (96000) 500kg 68

KJCH Kanga Hydraulic Jib Crane (96500) 600kg 100

Profi le Manual: Fully welded, reinforced 100x100x5mm RHS frame Hydraulic: A robust and durable steel construction with reinforced stress pointsLinkage/Mounting Manual: Cat 1 Double Clevis ‘A’ Frame manufactured from 12mm fl at bar Hydraulic: Cat 1 and 2 top and lower link pointsNo. Lift Points Manual: Two (2) fi xed, reinforced positions Hydraulic: Three (3) position adjustable boom with swivel hookOperation Manual: Using a tractor’s 3-point linkage arms Hydraulic: Via a 2” hydraulic ramFinish Powder coated baked enamel

Bale SpikeProfi le Fully welded RHS frameLinkage/Mounting Double clevis category 1 with pins and clipsType of Tine Small - high tensile (stop bale turning) Large - straight conus 2 tine (1240mm) with coned nutFinish Powder coated baked enamel


RRP (inc. GST)

KHH-BS Kanga Bale Spike (95000) 60


RRP (inc. GST)

KHH-SF Kanga Silage Fork (94000) 87

Silage ForkProfi le Fully welded, gusseted, RHS/fl at frameLinkage/Mounting Double clevis category 1 and 2 linkage with pins and clipType of Tine Straight conus 2 tines (1240mm) with coned nutFinish Powder coated baked enamel

Hydraulic Jib Crane

Manual Jib Crane


22




RRP (inc. GST)

KHH-FOF Kanga Adjustable Round Bale Feed Out Fork (93000) 96

Profi le Fully welded and reinforced heavy duty RHSLinkage/Mounting Double clevis category 1 linkage with

category 1 pins and clipType of Tine Reinforced 75x75x4 RHS, off set, adjustableTine Adjustment Multiple positions between 1100 - 1700mm*Spikes Two (2) 50mm solid, tapered, lockingFinish Powder coated baked enamel

Adjustable Round Bale Feed Out Fork

* Left and right tines are interchangeable and must be swapped to achieve full range of adjustment

Disc HarrowProfi le 16 discs (4 gangs of 4) in an ‘X’ confi guration with individual greasable bearing housings Material Angle/fl at bar frame and towerType of Disc 405mm (16”) notched discFinish Powder coated baked enamel


Weight (kg)

Tractor (hp)

RRP (inc. GST)

KHDH1.5 Kanga 1.5m (5ft) Disc Harrow (91000) 1500 4’-11” 215 15 - 35

Pasture Harrow Rake


RRP (inc. GST)

KHPR400 Kanga 4.0m (13-0”) Folding Harrow Rake (90500) 260

KHPR600 Kanga 6.0m (20’) Hydraulically Folding Pasture Harrow Rake (90550) 445

Overview Heavy duty folding harrows that connect to a tractors 3-point linkage. Ideal for rejuvinating arenas, breaking up hard ground, spreading manure and promoting new growth without the use of expensive fertilisers.

Material Tube frame complete with one piece cast iron scarifi er netLinkage/Mounting Category 1 (3-point linkage)Finish Powder coated baked enamel

Hydraulic model

Folding model

23

Chain Link Drag Harrow

Combo Harrow

Overview Heavy duty ‘chain link’ drag harrow designed to follow the contours of the ground spreading organic material to stimulate new growth.Material Channel draw bar and ‘chain link’ spreading section from 10.5mm square barFinish Powder coated baked enamel

Overview A light duty harrow that is a simple and versatile means to pasture improvement. The front section lightly scarifys the surface of the ground breaking up any organic matter while the trailing ‘Chain Links’ evenly spreads it out. Designed for paddocks in a good to reasonable condition.Material Channel Tool Bar with One Piece Cast Iron Scarifi er net, tube middle Tool Bar and trailing ‘chain link’ spreading section from 10.5mm square barFinish Powder coated baked enamel


Depth (net

section)

Weight(kg)

RRP (inc. GST)

KHCL1.8 Kanga 1.8m (6ft) Chain Link Drag Harrow (90060) 1800 5’-11”

1475 4’-10” 170

KHCL2.4 Kanga 2.4m (8ft) Chain Link Drag Harrow (90080) 2400 7'-11"

1475 4’-10” 230

KHCL3.0 Kanga 3.0m (10ft) Chain Link Drag Harrow (90100) 3000 9'-11"

1475 4’-10” 270

KHCL3.6 Kanga 3.6m (12ft) Chain Link Drag Harrow (90120) 3600 11’-10

1475 4’-10” 340


1475 4’-10” 460


1475 4’-10” 540


Depth (net

section)

Weight(kg)

RRP (inc. GST)

KHDH18 Kanga 1.8m (6ft) ‘Combo’ Drag Harrow (91100) 1800 5’-11”

1960 / 6’5” 155

KHDH24 Kanga 2.4m (8ft) ‘Combo’ Drag Harrow (91200) 2400 7'-11"

1960 / 6’5” 200

KHDH30 Kanga 3.0m (10ft) ‘Combo’ Drag Harrow (91300) 3000 9'-11"

1960 / 6’5” 255

KHDH36 Kanga 3.6m (12ft) ‘Combo’ Drag Harrow (91400) 3600 11’-10

1960 / 6’5” 300

3-point linkage lifting frame to suit chain link drag harrow


Box Scraper

Stick Rake

Profi le Fully welded, rigid box blade, boxed tool barMould Board 430mm high, thickness of 4mm (1.2m), 5mm (1.8m) or 8mm (2.4m)Type of Tines High tensile height adjustableCutting Edge 2 x 150mm heat hardened carbon/chrome (spring steel)Finish Powder coated baked enamelLinkage/Mounting Category 1 bolt on lower linkage pins and clip

Profi le Fully welded rigid RHS tool bar. The 1.8m and 2.4m are 50x50x4 RHS, the 3.0m frame uses both 75x50x4 and 50x50x4 RHS

Linkage/Mounting Double clevis, category 1 lower linkage, category 1 lower link pins and clips Type of Tines 10mm x 32mm high tensile ‘S’ tine with 390mm ground clearanceTine Point High tensile reversibleTine Spacing Point to point 140mm (approx.) point to point.

Code Description Tractor (hp)

RRP (inc. GST)

KSR180 Kanga 1800 (6’-0”) Fixed Stick Rake, with 13 Tines (60100) 15 - 30



Code Description Overall Width No. of Tines

Weight (kg)

Tractor (hp)

RRP (inc. GST)

K120BS Kanga 1.2m (4’-0”) Box Scraper (49500) 1230mm 4 150 15 - 30



24




TB Series Flail Mower


Weight (kg)

No. of Blades

Tractor (hp)

RRP (inc. GST)

STB110 Sicma TB110 - 1.10m (43”) Flail Mower (40500) 1220 48” 158 52 / 26 15 - 35

STB125 Sicma TB125 - 1.25m (50”) Flail Mower (41500) 1380 54” 173 60 / 30 18 - 35

Suited Applications Multi purpose machine suited to grassy applications and light undergrowth, like bracken and blackberry bushes.

Deck Material One piece 3mm, cold pressed formed and reinforcedGearbox High speed (540rpm)PTO Shaft Series 4 (35hp/26kw) triangular profi le tube and safety coversDrive System Belt driven using three (3) ‘SPA’ type beltsFinish Premium quality agricultural enamelSkids Adjustable between 15 - 150mm (1/2”- 4”)Wheels Full length roller with sealed bearingsLinkage/Mounting Positive locking multi position tower, category 1Blades 5mm carbon/chrome spring steel in ‘Y’ shape

Mounting Measurements

Model Centered Offset Max. Offset

TB 110 767/434mm 467/734mm 300mm (12”)

TB 125 767/584mm 467/884mm 300mm (12”)

Measurements refer to distance left/right of centre

S5815275 TB Series ‘Y’ blade

S5535276 TB Series ‘Y’ blade spacer

S5715103 TB Series hammer (optional)

25

il Mower

2080 rpm

540 rpm

26



TMX Series Flail Mulcher


Weight (kg)

No. of Blades

Tractor (hp)

RRP (inc. GST)

STMX155 Sicma TMX155 - 1.55m (55”) Flail Mulcher (52000) 1710 6’-7” 341 40 / 20 30 - 50

STMX185 Sicma TMX185 - 1.85m (73”) Flail Mulcher (53000) 2010 7’-9” 364 48 / 24 40 - 50

Suited Applications Medium duty, multi purpose machine suitable for cutting in a wide range of applications like grass, light undergrowth, vineyard/orchard prunings and hazelnut groves.

Deck Material One piece 5mm, cold pressed formed and reinforcedGearbox High speed (540rpm)PTO Shaft Series 5 (54hp/42kw), triangular profi le tube with safety coversDrive System Belt driven using ‘BX’ type beltsFinish Premium quality agricultural enamelSkids Adjustable between 18 - 70mm (3/4” - 2 3/4”)Roller Full length roller with self lubricategorying bearingsLinkage/Mounting Dual position, fi xed mounted tower, category 1 and 2Blades 6mm carbon/chrome spring steel in ‘Y’ shape



TMX155 770/895mm 490/1175mm 280mm (11”)

TMX185 770/1195mm 490/1475mm 280mm (11”)


S8683040 TMX Series fl ail mulcher dual wheels (in lieu of rear roller)

S5815160 TMX Series fl ail mulcher ‘Y’ blade (standard)

S5535710 TMX Series fl ail mulcher ‘Y’ blade bush

S5715100 TMX Series fl ail mulcher hammer (optional)

ail Mulcher


Suited Applications Medium duty multi purpose machine

2025 rpm

540 rpm

Overseas model shown (hydraulic shift not included)

27



Weight (kg)

No. of Blades

Tractor (hp)

RRP (inc. GST)

STR200 Sicma TR 200 - 2.0m (79”) Flail Mulcher (56000) 2160 85” 688 44 / 22 60 - 90

STR255 Sicma TR 255 - 2.55m (100”) Flail Mulcher (56500) 2700 106” 832 56 / 28 75 - 90

Suited Applications Multi purpose machine with hinged rear fl ap. Flap can be fi xed open for easy extraction of grasses like straw and maize. Strong enough to handle vineyard and orchard pruningsDeck Material One piece 5mm, cold pressed formed and reinforcedGearbox High speed (540/1000rpm) in oil bath with L1000 drive shaftPTO Shaft Series 6 (64hp/48kw), triangular tube and safety coversDrive System Belt driven using ‘SPB1550’ belts. TR200 (4). TR255 (5)Finish Premium quality agricultural enamelSkids Adjustable between 32 - 95mm (11/2” - 3 3/4”)Roller Full length roller with self lubricating bearingsLinkage/Mounting Dual position, fi xed, double clevis, category 1 and 2Blades 6mm carbon/chrome spring steel in ‘Y’ shape

S5136580 TR Series fl ail mulcher grass defl ector (right)

S5136581 TR Series fl ail mulcher grass defl ector (left)

S8630020 TR Series fl ail mulcher dual wheels (in lieu of rear roller)

S5816618 TR Series fl ail mulcher ‘Y’ blade (standard)

S5536541 TR Series fl ail mulcher ‘Y’ blade bushing

S5596542 TR Series fl ail mulcher ‘Y’ blade spacer

S5716648 TR Series fl ail mulcher hammer (optional)



TR200 1030/1005mm 790/1345mm 340mm (13”)

TR255 1275/1400mm 935/1740mm 340mm (13”)



Suited Applications Multi purpose machine with hinge

2052 rpm

540 rpm

Photographed with optional dual wheels and spreader vain kitTR Series Flail Mulcher

28




Weight (kg)

No. of Blades

Tractor (hp)

RRP (inc. GST)

STZF220 Sicma TZF 220 - 2.2m (87”) Front/Rear FLAIL (57500) 2480 98” 840 18 / 54 60 - 90

STZF250 Sicma TZF 250 - 2.5m (98”) Front/Rear FLAIL (58000) 2740 108” 890 20 / 60 70 - 90

Suited Applications Heavy duty reversible (front/rear mounted)* machine with double 180° (540/1000) PTO and hydraulic side shift for tractors 60-90hp. Suitable for cutting grass and mulching large prunings due to a robust and compact design.

Deck Material One piece 5mm, cold pressed formed and heavily reinforcedGearbox High speed (540/1000rpm) with L1000 drive shaft and double free wheelPTO Shaft Series 6 (64hp/48kw), triangular tube and safety coversDrive System Belt driven using ‘XPB’ beltsFinish Premium quality agricultural enamelRoller Full length roller with self lubricating bearings Linkage/Mounting Multiple position, hydraulic offset, category 2Blades Smooth 150mm wide hammers

(heavy duty carbon/chrome)

S5716270 TZF Series self sharpening smooth hammer (standard)

S5816274 SL/TUF/FB/TZF Series fl ail ‘Y’ blade (optional)

S5536275 TUF/TZF Series ‘Y’ blade spacer

* Machines come set up for 540rpm. Pulleys and belts must be changed for 1000rpm. Kits are supplied to run at 540/1000rpm.

1971 rpm 2044 rpm

540 rpm 1000 rpm




TZF 220 1220/1162mm 870/1512mm 350mm (14”)

TZF 250 1220/1426mm 820/1826mm 400mm (16”)

TZF Series (Front/Rear) Flail Mulcher

29


BH Series Rotary Hoe (Formally SA-K)


Weight (kg)

No. of Blades

No. of Flange

Tractor (hp)

RRP (inc. GST)

SBH100 Sicma BH 1000 - 1.0m (39”) Rotary Hoe (18100) 1130 44” 130 24 4 15 - 30

SBH120 Sicma BH 1200 - 1.2m (47”) Rotary Hoe (18120) 1330 52” 145 30 5 20 - 30

Overview Light weight compact fi xed machine for compact tractors 15 - 30hpDeck Material One piece 4mm, cold pressed formed, 5mm side platesGearbox L700 drive shaft in oil bathPTO Shaft Series 4 (35hp/26kw), triangular profi le tube, safety covers and 150mm (6”) slip clutchDrive System Side chain drive in oil bathFinish Premium quality agricultural enamelSkids AdjustableLinkage/Mounting Fixed, double clevis, category 1Blades 6 per fl ange, curved carbon/chrome spring steelWorking Depth 150mm (6”)

S4811786 SA-K Series curved blade (left)

S4811785 SA-K Series curved blade (right)

30



CS Series Rotary Hoe

Overview Medium to heavy fi xed machine with skids and anti-clog provisions for tractors 30-50hpDeck Material One piece 4mm, cold pressed formed, 6mm side platesGearbox L750 drive shaft in oil bathPTO Shaft Series 5 (54hp/42kw), triangular profi le tube, safety covers and

180mm (7”) slip clutchDrive System Side chain drive in oil bathFinish Premium quality agricultural enamelSkids AdjustableLinkage/Mounting Fixed, double clevis, category 1Blades 6 per fl ange, curved carbon/chrome spring steelWorking Depth 180mm (7”)

S4811401 CS Series curved blade (left)

S4811400 CS Series curved blade (right)


Weight (kg)

No. of Blades

No. of Flange

Tractor (hp)

RRP (inc. GST)

SCS135 Sicma CS135 - 1.35m (53”) Rotary Hoe (19000) 1480 58” 238 42 7 30 - 50



Overview Medium to heavy fixed machine with skids and anti-clog provisions for tractors 30-5

Photographed with optional front defl ectors

31


RM Series Rotary Hoe

Overview Medium, fi xed machine with skids and anti-clog provisionsDeck Material One piece 4mm, cold pressed formed, load bearing frame, 8mm side platesPTO Shaft Series 5 (54hp/42kw), triangular profi le tube, safety covers and 180mm (7”) slip clutchGearbox Single speed L800 drive shaft in oil bathDrive System Side gear drive in oil bath, fi xed to load bearing frameFinish Premium quality agricultural enamelSkids AdjustableLinkage/Mounting Fixed, double clevis, category 1 and 2Blades 6 per fl ange, curved carbon/chrome spring steelWorking Depth 200mm (8”)

S4818223 Optional SM/SMR/RM Series curved blade (left)

S4818222 Optional SM/SMR/RM Series curved blade (right)

S4818225 Optional SM/SMR/RM Series square blade (left)

S4818224 Optional SM/SMR/RM Series square blade (right)


Weight (kg)

No. of Blades

No. of Flange

Tractor (hp)

RRP (inc. GST)

SRM155 Sicma RM155 - 1.55m (61”) Rotary Hoe (25000) 1710 67” 420 36 6 40 - 70

SRM180 Sicma RM180 - 1.80m (71”) Rotary Hoe (26000) 1960 77” 460 42 7 45 - 70

(Formally SM-SMR)

Overview Medium, fi xed machine with skids and anti-clog provisionsD k M t i l O i 4 ld d f d l d b i f 8 id l t

32



SPR Series Rotary Hoe

S8423080 Optional SPR Series depth wheel kit

S4814519 Optional SPR Series curved blade (left)

S4814518 Optional SPR Series curved blade (right)

S4814517 Optional SPR Series square blade (left)

S4814516 Optional SPR Series square blade (right)

S4814515 Optional SPR ‘Anti Pan’ blade (left)

S4814514 Optional SPR ‘Anti Pan’ blade (right)

S4005116 Optional SPR ‘Spiked’ roller for SPR 185 (indent orders only)



S8423095 Optional SPR ‘Packer’ roller for SPR 210 (indent orders only)

S8423096 Optional SPR ‘Packer’ roller for SPR 235 (indent orders only)


Weight (kg)

No. of Blades

No. of Flange

RRP (inc. GST)

SSPR160 Sicma SPR160 - 1.6m (63”) Rotary Hoe (27500) 1710 (67”) 560 36 6




SSPR160-AP Sicma SPR160 ‘Anti Pan’ - 1.6m (63”) Rotary Hoe (27600) 1710 (67”) 575 36 9




Overview Heavy duty, fi xed machine for tractors 60–90hp with 4+2 speed gearbox with 540/1000 PTODeck Material One piece 4mm, cold pressed formed with load bearing frame and 8mm side platesGearbox 4+2 speed gearbox with L850 drive shaft in oil bathPTO Shaft Series 8 (96hp/71kw), triangular profi le tube with safety covers and 200mm (8”) 2 plate slip clutchDrive System Side gear drive in oil bath, fi xed to load bearing frameFinish Premium quality agricultural enamelSkids AdjustableLinkage/Mounting Fixed, centre mounted, double clevis, category 2Blades 6 per fl ange, curved carbon/chrome spring steelWorking Depth 200mm (8”)

s Rotary Hoe

Heavy duty, fi xed machine for tractors 60–90hp with 4+2 speed gearbob x wiwithth 554040/1/100000 0 PTPTOOOne piece 4mm, cold pressed formed with load bearing frame and 8mm side plates

“Anti Pan” rotor

33

Caroni Implements reserves the right to change design, specifi cation and prices without noticePrices are Recommended Retail Only and do not include freightFreight Terms FOB Ex Works, Dandenong, VictoriaIndividual distributors prices may vary

58005358 Optional RG Series deapth wheel kit

S4814005 Optional RG Series curved blade (left)

S4814004 Optional RG Series curved blade (right)

S4814003 Optional RG Series square blade (left)

S4814002 Optional RG Series square blade (right)

S4814514 Optional ‘Anti Pan’ blade (left)

S4814515 Optional ‘Anti Pan’ blade (right)

S8004176 Optional ‘Spiked’ roller for RG 255 (indent orders only)

S8004178 Optional ‘Spiked’ roller for RG 305 (indent orders only)

S8004025 Optional ‘Packer’ roller for RG 255 (indent orders only)

S8004027 Optional ‘Packer’ roller for RG 305 (indent orders only)


Weight (kg)

No. of Blades

No. of Flange

RRP (inc. GST)

SRG255 Sicma RG255 - 2.55m (100”) Rotary Hoe (30000) 2770 109” 970 60 10

SRG305 Sicma RG305 - 3.05m (120”) Rotary Hoe (30500) 3270 129” 1032 72 12

SRG255-AP Sicma RG255 ‘Anti Pan’- 2.55m (100”) Rotary Hoe (30100) 2770 109” 970 60 15

SRG305-AP Sicma RG305 ‘Anti Pan’- 3.05m (120”) Rotary Hoe (30600) 3270 129” 1032 72 18

Overview Heavy duty, fi xed machine for tractors 90-160hp with 2+2 gear drive transmissionDeck Material One piece 4mm, cold pressed formed load bearing frame, 8mm side platesGearbox 2+2 speed adjustable multi speed gearboxPTO Shaft Series 8 (96hp/71kw), triangular profi le tube safety covers and 200mm (8”) 4 plate slip clutchDrive System Side gear drive in oil bath, fi xed to load bearing frameFinish Premium quality agricultural enamelSkids AdjustableLinkage/Mounting Fixed, centre mounted, double clevis, category 2Blades 6 per fl ange, curved carbon/chrome spring steelWorking Depth 200mm (8”)

erview Heavy duty fixed machine for tractors 90-160hp with 2+2 gear drive transmission

‘Anti Pan’ rotor

RG Series Rotary Hoe

34



3-PL Spinner Spreader

P619.001 P/PL Series lime agitator

P620.002 P/PL Series single side distributor

P620.043 P/PL Series twin side distributor

P601.002 P/PL Series stainless steel veins (each)

P605.005 P/PL Series stainless steel shutter lever (right)

P605.006 P/PL Series stainless steel shutter lever (left)

P902.002 Hopper cover (P/PL300)

P902.003 Hopper cover (P/PL400/500)

Code DescriptionCapacity Height

(mm)Weight

(kg)RRP

(inc. GST)(lt) (kg)

CP300 Cosmo P300 Spinner Spreader (60000) 269 347 1050 58

CP500 Cosmo P500 Spinner Spreader (61000) 361 466 1130 63

CPL400 Cosmo PL 400 PVC Hopper Spinner Spreader (61400) 297 383 1070 60

CPL500 Cosmo PL 500 PVC Hopper Spinner Spreader (61500) 361 466 1130 63

CPSC500 Cosmo PS-C 500 PVC Hopper Spreader – Bottom Drop (61600) 386 495 1170 70

PL SeriesP Series

P/PL Lime agitator

Overview P series - single piece metal hopper with tube frame PL series - single piece heavy duty PVC hopper with tube frameSpinner Disc Stainless steel spinner plate with 6 fi nsGearbox Single speed 540rpm 1:1 ratioPTO Shaft Series 2 (21hp/16kw), triangular profi le tube with safety coversFinish Premium quality agricultural enamel with epoxy varnishLinkage/Mounting Fixed category 1, bolt on pinDischarge Side drop onto spinner fi ns for even distributionSpreading Width Granular - 12 - 14m (39 - 46ft) Powder - 6 - 7m (20 - 23ft)

Stainless steel disk

Single side distributor

Twin side distributor

35


Tow Type Spinner Spreaders

P902.001 Hopper cover (PTP180)

P902.002 Hopper cover (PTP300)

PTB902.005 Hopper cover (PTB430)

PTB902.004 Hopper cover (PTB560)

Overview PTB - single piece, low profi le metal hopper with fl oatation tyres on a wide wheel base and a ‘dog-gear’ to engage/disengage spinner plate. PTP - heavy duty PVC hopper with tubular frame on fl oation tyres.Spinner Disc PTB - Anti-rust coated disc with 6 fi ns PTP - stainless steel spinner plate with 6 fi nsGearbox single speed ground drive 1:1 ratioAxle PTB - 1830mm (72”) outside to outside PTP - 1050mm (41”) outside to outsideWheels PTB - 18” x 9.5” (460 X 240mm) fl oatation tyres PTP - 16” x 6” (400 x 150mm) fl oatation tyresFinish Premium quality agricultural enamel with epoxy varnishDischarge PTB - manual cable operation with bottom drop onto spinner fi ns PTP - manual split levers with lateral drop onto spinner fi nsSpreading Width PTB 14 - 16m (46 - 52ft) @ 13km/h (8mph) PTP 12 - 14m (39 - 46ft) @ 13km/h (8mph)

PTB560 Tow type


(mm)Weight

(kg)RRP

(inc. GST)(lt) (kg)

CPTP18 Cosmo PTP180 Tow Type Spinner Spreader (60300) 165 213 1300 80

CPTP30 Cosmo PTP300 Tow Type Spinner Spreader (60350) 260 335 1440 84

CPTB43 Cosmo PTB430 Tow Type Spinner Spreader (60400) 320 400 1080 136

CPTB56 Cosmo PTB560 Tow Type Spinner Spreader (60500) 400 480 1300 139

PTP180 Tow type

Covers available for tow type spreaders

36



Twin Spin Super SpreadersRX - 24m Double Disc Spreader

Overview Twin spin machines with slow speed agitators, stainless steel components, hydraulic opening system and power take off (PTO) shaft.

Hopper Heavy duty square/rectangular profi le hopperGearbox Three (3) gearboxesLinkage/Mounting Fixed category 2 and 3Finish Premium quality agricultural enamel with epoxy varnishDischarge Opening opened/closed hydraulicallySpreading Width RE series. 12 - 18m (40 - 60ft) RX series. 12 - 24m (40 - 80ft)Spreading Angle 180° - 90°, left or rightSpreading Discs Stainless steel with different length fi ns to ensure full even spread

shaft.

Photographed with optional professional hopper cover

37


RE -18m Double Disc Spreader

Code DescriptionDimensions Weight

(kg)Capacity

(lt)RRP

(inc. GST)Width Length Height

CRE125 Cosmo RE1250 Twin Spin 18m Fertiliser Spreader 1500 1350 1240 198 1170

RE620.121 RE Twin discharge assembly

RE902.018 RE Hopper cover

CRX110 Cosmo RX1100 Twin Spin 24m Fertiliser Spreader (70000) 1300 2300 1050 310 950

CRX160 Cosmo RX1600 Twin Spin 24m Fertiliser Spreader (70500) 1300 2300 1270 323 1375

CRX190 Cosmo RX1900 Twin Spin 24m Fertiliers Spreader (71000) 1300 2300 1370 350 1660

RX902.006 RX Professional hopper cover

Twin discharge assembly

Twin Spin Super Spreaders

38



Pendulum Super Spreader

Overview Strong reinforced frame, traditional fi breglass hopper and a gearbox with an adjustable spreading width.Hopper Heavy duty fi breglassGearbox New generation fl ywheel (1:1 ratio) with a key adjustmentLinkage/Mounting Fixed category 1Finish Premium quality agricultural enamel with epoxy varnishDischarge Manual lever (hydraulic option available)Spreading Width 0.75m - 15m (21/2 - 50ft). Machine standard with 9-15m spout

Standard opening adjustment

Crown lime agitator

Optional hydraulic opening system

Adjustable spreading width

39

Caroni Implements reserves the right to change design, specifi cation and prices without noticePrices are Recommended Retail Only and do not include freightFreight Terms FOB Ex Works, Dandenong, VictoriaIndividual distributors prices may vary


(mm)Weight

(kg)RRP

(inc. GST)(lt) (kg)

CPDV50 Cosmo PDV500 Pendulum Super Spreader (76000) 480 523 900 130

CPDV60 Cosmo PDV600 Pendulum Super Spreader (77000) 580 632 1000 142

CPDHV80 Cosmo PDHV800 Pendulum Super Spreader (78000) 850 926 970 170



CPDVPT Paddock trailer for PDV/PDHV spreader* (81000)

PDV 810.001 Series 4 wide angle PTO shaft (trailer)

PDV 619.026 PDV/PDHV crown lime agitator

PDV 619.008 PDV hydraulic opening system

PDV 619.009 PDHV hydraulic opening system

PDV 902.011 Hopper cover (PDV model)

PDV 902.012 Hopper cover (PDHV model)

PDV 304.100 PDV/PDHV spout - standard (full coverage 9-15m)

PDV 304.101 PDV/PDHV spout - narrow (full coverage 4-8m)

PDV 304.102 PDV/PDHV stainless spout - vineyard no.2 (band spreading 0.74-4.5m)

PDV 304.103 PDV/PDHV stainless spout - vineyard no.1 (full coverage 2-4m)

PDV 304.105 PDV/PDHV stainless spout - orchard (band spreading 2-10m)

PDV 304.107 PDV/PDHV stainless spout - right side full coverage (4-6m)

PDV 304.108 PDV/PDHV stainless spout - left side full coverage (4-6m)

PDV 304.109 PDV/PDHV spout end - band spreading (left or right)

PT611111 PT Series crown lime agitator (PT models prior to 2008)

PT304024 PT Series spout - standard full coverage (pt models prior to 2008)

Model PDHV-1250 Model PDV-500

Pendulum Super Spreader

* May require longer wide angle PTO shaft.

40



3-PL Cement Mixer

Overview Designed for concrete preparation, this robust mixer can also be used to mix a wide range of different materials.

Hopper/Cone Large, open mouthed, 3mm rolled, seamless 320 litre, 440mm (17.5”) diameterGearbox Chain transmission drive system (10:1 reduction) in a steel housingLinkage/Mounting Fixed, bolt on, category 1Finish Premium quality agricultural enamel with epoxy varnishDischarge 18” x 1.5” hydraulic cylinderWidth 860mm (34”)Length 930mm (36.5”)Height 950mm (37.5”)Rotation Min - 250rpm. Max. - 300rpm.Mixing Capacity 195 ltr = 0.2m3 = 7 ft3

Code DescriptionHyd. Pressure Weight

(kg)RRP

(exc. GST)RRP

(inc. GST)min (atm) max (atm)

80600 Cosmo Mixer 80 - 320 Cement Mixer 50 140 100 $1,340.91

41



Overall Width

Weight (kg)

No. of Blades

Tip Speed (ft/min)

RRP (inc. GST)

SFA120 Sicma FA1200 - 1.2m Finishing Mower (15000) 1200 48”

1350 53” 178 3 13709


1625 64” 196 3 14082


1930 76” 214 3 14185


2235 88” 370 3 15243

S5812701 FA 1200 - 1.2m Finishing mower blade (suit TC480)

S5812702 FA 1500 - 1.5m Finishing mower blade (suit TC590/TC910)

S5812703 FA 1800 - 1.8m Finishing mower blade (suit TC710)

S5812707 FA 2100 - 2.1m Finishing mower blade

Suited Applications Any grassy areas such as paddocks, golf courses, parks, gardens, lawns, sports fi elds and road sides.

Deck Material One piece 5mm, cold pressed formed and reinforcedGearbox High speed (540rpm) in oil bathPTO Shaft Series 4 (35hp/26kw), triangular profi le tube with safety coversDrive System Belt driven using two (2) ‘B’ type beltsFinish Premium quality agricultural enamelCutting Height Adjustable between 25 - 100mm (1”- 4”)Wheels Four (4), 360 degree spinning solid rubber wheelsLinkage/Mounting Floating, bolt on category 1 pinsBlades 6mm carbon/chrome spring steelTractor Power 12 - 60hp 1.2m = 12hp+, 1.5m = 18hp+, 1.8m = 25hp+, 2.1m = 30hp+Discharge Rear dishcarge only

Finishing Mower

www.farmimplements.com.au

T: (03) 9706 5166 F: (03) 9706 5050

Documents

Tractor Implement Specialists - Farm Implements Australia Implements... · Farm Implements P/L reserves the right to change design, speciﬁ cation and price without notice. Prices