Upload
telletxe283
View
62
Download
0
Embed Size (px)
Citation preview
Train Simulator 2013 – Quick Reference
© Copyright RailSimulator.com 2012. All rights reserved. Release 1.0 Page 1
Some controls only apply to certain control models. To set the control model, select GAMEPLAY from the Options menu in the Main Menu. Change the Driving Model to either “Simple Controls” or "Expert". Controls exclusive to the Simple control model appear in green. Controls exclusive to the Expert control model appear in red. Note that not all controls are present in every locomotive. Also, features in TS2013 are periodically updated – please check the latest electronic documentation provided with the software for any changes. Simple Driving
Accelerate A
Decelerate D
Change direction. S
Emergency Brake Backspace
Horn
Spacebar
Expert Driving
Increase/Decrease throttle (open/close regulator for steam trains)
A/D
Increase/Decrease Reverser W/S
Increase/Decrease Train brake ‘ /;
Increase/Decrease locomotive brakes
]/[
Increase/Decrease dynamic brakes
./,
Gear up/Gear down E/shift -E
Steam Controls - When Overlay (HUD) displayed
Brake Control/display
Blower on/off
Fire status/Load coal Water status/Load water Boiler pressure
Steam Controls - When no Overlay (HUD) displayed
Small ejector on/off J
Cylinder cocks on/off C
Coal Increase/decrease the rate of shovelling.
R/shift -R
Open/close the firebox door F/ shift -F
Injector Control.
Turns on/off Live injector Turns on/off Exhaust injector Increases/decreases the flow to the Live injector Increases/decreases the flow to the Exhaust injector
I O K/shift-K L/shift-L
Damper/ Blower control
Increases/decreases the Blower. Increase/decrease the Damper
N/shift -N M/shift-M
The use of this software product is subject to the user’s acceptance of the limited license and other terms and conditions set forth in the User Agreement available online at http://www.railsimulator.com.
Controlling the view
Cab view. 1
External front camera. 2
Rear of train 3
Trackside camera 4
Passenger view 5
Front coupling camera 6
Overhead Yard camera 7
Detach camera from train for general exploration
8
Zoom in. (scroll mouse wheel) Up arrow
Zoom out (scroll mouse wheel) Down arrow
Head out of cab left/Head out of cab right.
Shift+2
Alternate camera
Move forward to next cab. (For consists with multiple cabs)
Ctrl+ =
Move back to previous cab. (For consists with multiple cabs)
Ctrl+ -
Additional keys (Note: not all are available in all views): Zoom: “ ↑”, “ ↓” Zoom fast: Shift + “ ↑”, Shift + “ ↓” Pan: “←”, “ →” Angle: ctrl+ “ ↑”, “ ↓”
© 2012 RailSimulator.com Limited. All rights reserved
The Train Simulator 2013 logo is a trademark of RailSimulator.com Limited.
All other trademarks are the property of their respective owners.
Train Simulator 2013 – Quick Reference
© Copyright RailSimulator.com 2012. All rights reserved. Release 1.0 Page 2
Other Controls (Note: Not all controls are available on all locomotives)
Load/unload passengers or freight T
Lights. Will cycle through headlight states if appropriate.
H or Shift-H
Wipers. V
Screenshot. Ctrl+ S
Engine stop/start. Z
Raise/Lower Pantograph (Electric trains only)
P
Alerter. Use of this feature will depend on the train and route being used. You must respond to the Alert or the brakes will be applied In general, a horn will advise you to acknowledge the warning
Q
Sander. X
Bell B
Emergency Brake. Back -space
Horn. Sound the horn or whistle. Spacebar
Handbrake off. This icon is displayed in the Coupling view
/
Pause. Gives you a choice of: Continue/Save Scenario State/View Controller Layout/View Keyboard Layout/Enter World Editor/in-game options/Quit
Esc
Request permission to pass signal in front/behind
Tab/ Al t+Tab
Change state of junction in front/behind.
G/ Shift+G
Couple manually. Ctrl+Sh ift+C
Exit. You will receive an option to exit or continue.
Ctrl -Q
Enter World Editor. Ctrl -E
Save position in Scenario. F2
Accessing other Information
Display 2D Track map. 9
Display Task Information. F1
Display Coupling view (locomotives, wagons, coaches).
Turn on/off minimal Overlay (HUD) F3
Turn on/minimise/off Driving Overlay
F4
Engine information. Only available if driving interface off.
F5
Display labels. F6
If Display Labels on, display engine and wagon numbers.
F7
Other Icons Activity markers Performance Indicators
Load bulk freight
Comfort.
Load Container
Fuel usage (above defined threshold).
Couple
Operational error.
Uncouple
Speeding.
Load fuel
Time keeping (late).
Load passengers
Wheel slip.
Load water
Accuracy warning
Set junction
Coach aligned with platform
Timeliness (early)
Perfectly accurate position
Driving Interface Simple-mode Driving Interface
Expert-mode Driving Interface
Current speed and speed limit
Current time and scenario instructions, comfort indicator
Track profile
Shows: Incline; Wagons; Distance to the next signal; Speed limits; Stations
Coupling view
Shows: locomotives/wagons/coaches in consist, state of handbrake Steam engine indicators
This shows (left to right): Boiler level; Boiler Pressure; Fire Mass ; Water level; Coal level.
Diesel/Electric engine indicators
This shows (left to right): Brake cylinder pressure and Brake pipe pressure.