Trainee Marine Technician

8/11/2019 Trainee Marine Technician

1/40


2/40

Alternator - turns mechanicalenergy into electrical energy &connected to flying wheel.

Camshaft - controls the openingand closing of the intake andexhaust valves.

Distributor - operates the ignitioncoil making it spark at exactly theright moment.

Piston - . It is the moving

component that is contained bya cylinder and is made gas-tightby piston rings .

Cranshaft To move piston.Valves - valves helps to pass

exhaust gas to turbo charger.

Liner - like a cover

ENGINE
http://en.wikipedia.org/wiki/Cylinder_(engine)http://en.wikipedia.org/wiki/Piston_ringhttp://en.wikipedia.org/wiki/Piston_ringhttp://en.wikipedia.org/wiki/Cylinder_(engine)


3/40

MAIN ENGINE

It is very important machine in Vessel.It is used to move propeller.

Radar Helps to change direction.

Steering Gear To move Radar

Turbocharger -Blower & compressor


4/40

Working: The fuel is burnt on the grateinside the furnace. The gases ofcombustion produced by burning offuel enter the combustion chamberthrough the flue tube and strike againstthe fire brick lining which directs themto pass through number of horizontaltubes, being surrounded by water.

After which the gases escape to the

atmosphere through smoke box andchimney

The water surrounded over the fix typesget heated and converted into steam.This steams being collected into thecrown of boiler. This steam is suppliedby steam stop valve.

BOILER


5/40

Fresh water is generallyproduced on board usingthe evaporation method.There are two things thatare available in plenty onship to produce freshwater Seawater andheat. Thus fresh water isproduced by evaporatingsea water using heat fromany of the heat source.The evaporated sea wateris then again cooled bythe sea water and thecycle repeats.

FRESH WATER GENERATOR
http://www.marineinsight.com/wp-content/uploads/2010/10/fresh-water-generator.jpg


6/40

Generally the heat source available istaken from the main engine jacketwater. The temperature available fromthis jacket water is about 70 deg.centigrade. Thus in order to producefresh water at 70 degrees we need toreduce the atmospheric pressure,which is done by creating a vacuuminside the chamber where theevaporation is taking place.

Also, as a result of the vacuum thecooling of the evaporated sea waterwill also take place at lowertemperature. This cooled water iscollected and transferred to the tank.

F.W. GENERATOR


7/40

PURIFIER


8/40

Incinerator

To burn Sludge.Incineration is a waste treatment process that involves

the combustion of organic substances contained in wastematerials.
http://en.wikipedia.org/wiki/List_of_solid_waste_treatment_technologieshttp://en.wikipedia.org/wiki/Combustionhttp://en.wikipedia.org/wiki/Organic_matterhttp://en.wikipedia.org/wiki/Organic_matterhttp://en.wikipedia.org/wiki/Combustionhttp://en.wikipedia.org/wiki/List_of_solid_waste_treatment_technologies


9/40


10/40

HOME PAGEcyclone

vessel


11/40

VESSEL DETAIL MODULE

Update Update vesselinformation


12/40

CERTIFICATES


13/40

INSPECTION REPORT


14/40

ASSET REGISTER

Spare Parts In machinary

Consumable Parts Daily use like gloves , nut etcs. (In Equipment 196)


15/40

SEARCH EQUIPMENT FOR EX. M/E CYLD HEADVALVE


16/40


17/40

ADD INTO SHOPPING CART


18/40

Update >> AddLocation >>Qty in Stock

ADD ROB


19/40

JOBS FOR M/E CYL HEAD W/VALVE


20/40

HISTORY


21/40

REQUEST FOR SERVICE


22/40

CREATING SERVICE REQUEST


23/40

CONSUME SPARE


24/40

UNPLANNED JOB


25/40

DOCUMENT- FLEET OPERATION MANUALCompany documents


26/40

ADD VOYAGE PLANNING, CARGO INFORMATION,WAY POINTS AND AGENT DETAILS ( ADD NEWPORT HERE)


27/40

HSSQ MODULE


28/40

HSSEQ MODULE

To create Safety Reports

For Ex.Safety & health, SMS Evaluation, Sickness, Ship Drills, Security

Drills, Incident report

Incident Report Damages for machinery

& Injuries for Accidents


29/40

CREWING / POB

Click red icon

To check crew

Exp. Sign-off

In 30 days

ADD CREW DOCUMENTS (LIKE PASSPORT) AND


30/40

ADD CREW DOCUMENTS (LIKE PASSPORT) ANDPERSONAL DETAILS


31/40

IF CREW IS SIGN-OFF


32/40

CREATING REQUISITION


33/40

CREATING REQUISITION (ADDING DELIVERYPORT)


34/40

TO CHECK JOBS DUE AND MAINTENANCEHISTORY


35/40

TO UPDATE COUNTERS


36/40

ADD CREW WAGES


37/40

CASH ADVANCE


38/40

PROVISIONS


39/40

BONDED ITEMS


40/40

DAILY REPORT

Documents

Trainee Marine Technician