Upload
others
View
21
Download
1
Embed Size (px)
Citation preview
Training Courses 2020
Alternators & AVRs Electric Power Generation
3
PRA
CTI
CA
L IN
FOR
MAT
ION
EDITORIAL
Nidec Leroy-Somer’s training team is pleased to present its new 2020 catalogue.
In July 2019, Nidec Leroy-Somer celebrated its centenary, a fantastic opportunity to mark 100 years of research, innovation and production, allowing us to deliver intelligent electrical solutions now and in the future.
Having bolstered its forward-looking approach since buying Nidec in 2017, the company continues from strength to strength in strategic areas such as: pumping, compression, handling, hoisting, the digital world, the automotive industry, energy generation, renewable energies and robotics.
The technology around drive systems and electricity production has made significantly more progress in recent years than during the three previous decades. Passing on these developments, helping you master and use them to full advantage through locally-available, high-quality* training courses are major challenges for us.
A new organisation, implemented during the course of 2019, means we can now offer you a wide variety of regionally-based training courses.
Whether you are a technician in a design office, working for an installer or a service company, responsible for maintenance, commissioning, energy optimisation or a technical salesperson in distribution, you will find targeted training programmes in this catalogue that can be customised to meet the specific requirements of your business.
You will find this catalogue on our website www.lrsm.co/training-epg-en.
See you soon in one of our training centres or directly on your site.
Alain BONDOUXProduct Training Manager
*As of 1st July 2017, Nidec Leroy-Somer complies with the 6 regulatory criteria defined by decree no. 2015-790 of 30 June 2015 relating to the quality of continuing vocational training activities. This law allows your financial organisation to take responsibility for training.
4
MAINTENANCE
PRA
CTI
CA
L IN
FOR
MAT
ION
FMT 300 - Vibration analysis and noise analysis on a rotating machine .................................................. 6
ALT 1 - Definition and selection of alternators .......................................................................................... 7
ALT 2 - Definition and selection of alternators .......................................................................................... 8
AVR 1 - Analog AVRs for low voltage alternators ................................................................................... 10
AVR 2 - D510C digital AVR for low voltage alternators .......................................................................... 11
AVR 3 - R600 analog AVR for medium and high voltage alternators ..................................................... 12
AVR 4 - D600 digital AVR for medium and high voltage alternators ....................................................... 13
AVR 5 - ControlReg 200/200P regulator/controller integrated solution for generator set ........................ 14
AVR 6 - D700 digital AVR for low, medium and high voltage alternators ................................................ 15
AVR 7 - D350 and D550 digital AVR for low voltage alternators ............................................................ 16
ALT 3 - Maintenance of alternators ........................................................................................................ 18
ALT 4 - Connected solution for predictive maintenance GenOSys for alternators ................................. 19
Customized training ................................................................................................................................ 20
Practical information and registration ..................................................................................................... 21
General conditions of training ................................................................................................................. 22
Table of content
SELECTION
OPERATION
PRACTICAL INFORMATION
NEW
5
FMT 300
AVR 1
ALT 1
AVR 2
ALT 2
AVR 3
AVR 4
AVR 5
AVR 6
AVR 7
ALT 3 ALT 4
MAINTENANCE
PrerequisitesALT 1 or AVR
PRA
CTI
CA
L IN
FOR
MAT
ION
Training module selection flowchart
KNOW HOW TO SELECT, DEFINE
KNOW HOW TO OPERATE, COMMISSION
PrerequisitesKnowledge
electrical engineering
PrerequisitesKnowledge
electrical engineering
PrerequisitesKnowledge
electrical engineering& Electrical basicsand electrical risks
habilitation
6
SELE
CTI
ON
Vibration analysis and noise analysis on a rotating machineFMT 300Level: I
After the training, the trainees will be able to:
- Identify the terms of the vibration analysis and their applications- Analyse a specifications sheet specific to noise - vibrations- Determine a design process taking vibration constraints into consideration- Perform a pre-analysis based on a vibration measurement report
OBJECTIVES
Price: €1090 excl. tax/traineeDuration: 2 daysAttendance*: 3 to 4 participantsPrerequisites: None Location: Angoulême, FranceDistribution: 30% practical - 70% theoretical
AUDIENCE
- Design office technician- Maintenance technician
CONTENT
- Definitions, measurement units, measurement points and associated standards in vibration
- Spectral analysis, definitions, examples, settings- Diagnostic process from spectrums in vibration and noise- Resonance: definition, measurement and calculation - Definitions, measurement units, measurement points and associated standards in acoustics
- Design approach: methodology, acceptance criteria, global process
- Case studies on application with motor / alternator
RELATED PRODUCTS
- Alternators - Electric motors
*The Course is confirmed once at least 3 inter and/or intra company participants have signed up.
Training booking and information:www.lrsm.co/training-epg-en
7
SELE
CTI
ON
Definition and selection of alternatorsALT 1Level: I
After the training, the trainees will be able to:
- Understand the operation of an alternator (mechanical constructions and configurations)- Identify the excitation and regulation principles of the alternators- Select an alternator
OBJECTIVES
Price: €1090 excl. tax/traineeDuration: 2 daysAttendance*: 4 to 8 participantsPrerequisites: None Location: Angoulême, France Distribution: 100% theoretical
AUDIENCE
- Design office technician- Sales engineer- Genset manufacturer
CONTENT
- Reminders on electricity basics in alternators- Excitation systems- Regulation modes and parallel running- Basics of electrical engineering applied to alternators - Main mechanical aspects: construction (IM), protection (IP), cooling (IC)
- Presentation of the LS range: design and manufacturing
RELATED PRODUCTS
- Synchronous alternators of the Leroy-Somer range
*The Course is confirmed once at least 4 inter and/or intra company participants have signed up.
Training booking and information:www.lrsm.co/training-epg-en
8
SELE
CTI
ON
Definition and selection of alternatorsALT 2Level: Advanced
After the training, the trainees will be able to:
- Understand the excitation and regulation principles of the alternators- Identify the details of the electrical parameters and mechanical configurations - Select an alternator according to a specifications sheet
OBJECTIVES
Price: €1310 excl. tax/traineeDuration: 3 daysAttendance*: 4 to 8 participantsPrerequisites: Knowledge in electrical engineering (basics)Location: Angoulême, FranceDistribution: 30% practical -70% theoretical
AUDIENCE
- Design office technician- Sales engineer- Genset manufacturer
CONTENT
- Reminder on the basics of the different excitation systems- Presentation of the operating modes and parallel running- Discovery of help options: LAM, U/F, equalisation, AREP, ...- Presentation of electrical engineering basics about alternators (insulation, temperature rises, harmonics, neutral point, reactance, PQ diagram, IEEE diagram, curves, ...)
- Presentation of mechanical aspects: construction (IM),protection (IP), cooling (IC), main bearings, terminal box
- Study of real-world cases based on trainee experiences
RELATED PRODUCTS
- Synchronous alternators of the Leroy-Somer range
*The Course is confirmed once at least 4 inter and/or intra company participants have signed up.
Training booking and information:www.lrsm.co/training-epg-en
9
Notes
SELE
CTI
ON
10
OPE
RAT
ION
Analog AVRs for low voltage alternatorsAVR 1Level: I
OBJECTIVES
AUDIENCE
- Maintenance technician- Design office technician- After-sales department technician- User/Operator- Genset manufacturer- Service Center technician
CONTENT
- Detail of the excitation systems- Presentation of the AVR global range- Presentation, parameter details, connections of the AVR- Presentation of AVRs and additional modules- Practical cases of use: voltage regulation, power factor, KVAr, stability parameters
RELATED PRODUCTS
- AVRs: R220, R250, R438, R450, R449, ...- Additional modules: R726, R731
Price: €1090 excl. tax/traineeDuration: 2 daysAttendance*: 2 to 4 participantsPrerequisites: ALT1 recommended + Knowledge electrical basics and electrical risks habilitationLocation: Angoulême, France Distribution: 50% practical - 50% theoretical
After the training, the trainees will be able to:
- Connect AVRs (AVR range for low voltage alternators)- Adjust analog AVRs - Diagnose incorrect AVR operation
*The Course is confirmed once at least 2 inter and/or intra company participants have signed up.
Training booking and information:www.lrsm.co/training-epg-en
11
OPE
RAT
ION
D510C digital AVR for low voltage alternatorsAVR 2Level: I
After the training, the trainees will be able to:
- Connect D510C digital AVR for low voltage range- Adjust digital AVR - Diagnose incorrect AVR operation- Use Easyreg© software
OBJECTIVES
Price: €1090 excl. tax/traineeDuration: 2 daysAttendance*: 2 to 4 participantsPrerequisites: ALT1 recommended + Knowledge electrical basics and electrical risks habilitationLocation: Angoulême or Orléans, FranceDistribution: 50% practical - 50% theoretical
AUDIENCE
- Maintenance technician- Design office technician- After-sales department technician- User/Operator- Genset manufacturer- Service Center technician
CONTENT
- Details of the excitation systems- Presentation, parameter details, connections of the D510C - Practical cases of use: voltage regulation, power factor, KVAr, stability parameters and manual mode
RELATED PRODUCTS
- D510C digital AVR
*The Course is confirmed once at least 2 inter and/or intra company participants have signed up.
Training booking and information:www.lrsm.co/training-epg-en
12
OPE
RAT
ION
R600 analog AVR for medium and high voltage alternatorsAVR 3Level: I
OBJECTIVES
AUDIENCE
- Maintenance technician- Design office technician- After-sales department technician- User/Operator- Genset manufacturer- Service Center technicia
CONTENT
- Details of the excitation systems- Presentation of the analog range- Parameters and connections of the AVR- Practical cases of use: voltage regulation, power factor, KVAr, stability parameters
RELATED PRODUCTS
- Analog AVRs of the R600 range (R610 & R630) for medium and high voltage alternators
Price: €1090 excl. tax/traineeDuration: 2 daysAttendance*: 2 to 4 participantsPrerequisites: ALT1 recommended + Knowledge electrical basics and electrical risks habilitationLocation: Orléans, FranceDistribution: 50% practical - 50% theoretical
After the training, the trainees will be able to:
- Connect R610 & R630 analog AVRs for medium and high voltage- Adjust analog AVRs - Diagnose incorrect AVR operation
*The Course is confirmed once at least 2 inter and/or intra company participants have signed up.
Training booking and information:www.lrsm.co/training-epg-en
13
OPE
RAT
ION
D600 digital AVR for medium and high voltage alternatorsAVR 4Level: I
After the training, the trainees will be able to:
- Connect and adjust D610 & D630 digital AVRs for medium and high voltage- Configure digital AVRs with SUPD600- Diagnose incorrect AVR operation
OBJECTIVES
Price: €1090 excl. tax/traineeDuration: 2 daysAttendance*: 2 to 4 participantsPrerequisites: ALT1 recommended + Knowledge electrical basics and electrical risks habilitationLocation: Orléans, FranceDistribution: 50% practical - 50% theoretical
AUDIENCE
- Maintenance technician- Design office technician- After-sales department technician- User/Operator- Genset manufacturer- Service Center technician
CONTENT
- Details of the excitation systems- Presentation of the digital range- Parameters and connections of the AVR- Operation of the SUPD600 software- Practical cases of use: voltage regulation, power factor,KVAr, stability parameters
RELATED PRODUCTS
- Digital AVRs of the D600 range (D610 & D630) for medium and high voltage alternators
*The Course is confirmed once at least 2 inter and/or intra company participants have signed up.
Training booking and information:www.lrsm.co/training-epg-en
14
OPE
RAT
ION
ControlReg 200/200P regulator/controller integrated solution for generator set - AVR 5Level: I
AUDIENCE
- Service Center technician- Genset manufacturer- User
CONTENT
- Reminder on electrical magnitudes- Basics on regulation- Basic functions on communication with motor (CAN)- Details on the LS Utility Software- Details on configuring ControlReg 200/200P- Use on generator set
RELATED PRODUCTS
- Low Voltage Shunt excitation range alternator (excitation current below 4 A)- ControlReg 200
Price: €750 excl. tax/traineeDuration: 1 dayAttendance*: 4 participantsPrerequisites: Knowledgeelectrical engineering and operating principle of the alternatorLocation: Angoulême, FranceDistribution: 50% practical - 50% theoretical
After the training, the trainees will be able to:
- Configure ControlReg 200/200P- Prepare starting up and installation on site- Understand the Utility Software- Run a fault diagnostic
OBJECTIVES
*The Course is confirmed once at least 4 inter and/or intra company participants have signed up.
Training booking and information:www.lrsm.co/training-epg-en
15
OPE
RAT
ION
*The Course is confirmed once at least 2 inter and/or intra company participants have signed up.
Training booking and information:www.lrsm.co/training-epg-en
D700 digital AVR for low, medium and high voltage alternatorsAVR 6Level: I
After the training, the trainees will be able to:
- Connect and adjust D700 digital AVR for low, medium and high voltage- Configure digital AVR using its EasyReg Advanced software- Diagnose incorrect AVR operation
OBJECTIVES
Price: €1090 excl. tax/traineeDuration: 2 daysAttendance*: 2 to 4 participantsPrerequisites: ALT1 recommended + Knowledge electrical basics and electrical risks habilitationLocation: Angoulême or Orléans, FranceDistribution: 50% practical - 50% theoretical
AUDIENCE
- Maintenance technician- Design office technician- After-sales department technician- User/Operator- Genset manufacturer- Service Center technician
CONTENT
- Details of the excitation systems- Presentation of the digital range- Parameters and connections of the AVR- Operation of the software- Practical cases of use: voltage regulation, power factor,KVAr, stability parameters
RELATED PRODUCTS
- D700 digital AVR for low, medium and high voltage alternators
16
OPE
RAT
ION
OBJECTIVES
D350 and D550 digital AVRs for low voltage alternatorsAVR 7Level: I
*The Course is confirmed once at least 2 inter and/or intra company participants have signed up.
Training booking and information:www.lrsm.co/training-epg-en
After the training, the trainees will be able to:
- Connect D350 and D550 digital AVRs- Adjust digital AVR - Diagnose incorrect AVR operation- Use Easyreg© software
Price: €1090 excl. tax/traineeDuration: 2 daysAttendance*: 2 to 4 participantsPrerequisites: ALT1 recommended + Knowledge electrical basics and electrical risks habilitationLocation: Angoulême or Orléans, FranceDistribution: 50% practical - 50% theoretical
AUDIENCE
- Maintenance technician- Design office technician- After-sales department technician- User/Operator- Genset manufacturer- Service Center technician
CONTENT
- Details of the excitation systems- Presentation, parameter details, connections of D350 and D550 - Practical cases of use: voltage regulation, power factor, KVAr, stability parameters and manual mode
RELATED PRODUCTS
- D350 and D550 digital AVRs
17
Notes
OPE
RAT
ION
18
MA
INTE
NA
NC
EMaintenance of alternatorsALT 3
AUDIENCE
- Maintenance technician- After-sales department technician- Service Center technician- Design office technician- User, Operator- Genset manufacturer
CONTENT
A flexible program adapted to your needs, focused on maintenance of alternators in our workshops, for example:- Maintenance program recommended- Taking measurements- Dismantling/reassembling alternators- Using manuals, ...
RELATED PRODUCTS
- Type of alternator to be defined according to your request
CUSTOMIZED TRAINING
For more information (objectives, program, price, duration, attendance, location)Contact us on +33 (0)5 45 94 59 03
Training booking and information:www.lrsm.co/training-epg-en
19
MA
INTE
NA
NC
E
Connected solution for predictive maintenance GenOSys for alternatorsALT 4Level: I
After the training, the trainees will be able to:
- Understand GenOSys architectures and operations- Configure alerts on the web portal genosys.net during commissioning and according the applications specificities
- Understand alternator health diagnostics algorithms and how to analyze dataand react during day to day operation of the system
OBJECTIVES
Price: €750 excl. tax/traineeDuration: 1 dayAttendance*: 4 to 8 participantsPrerequisites: ALT 1 and/or AVR 1 recommendedLocation: Angoulême or Orléans, France Distribution: 20% practical - 80% theoretical
AUDIENCE
• Trainees profile- Technician/Engineer- Sales engineer- Technical manager
• Entities- User/Operator - Genset manufacturer- Service Center technician- After-sales or maintenance department
CONTENT
- Generator electrical parameters (I, U, Iex, power factor, ...)- Basics on mechanics (vibrations, orbital, …)- Basics on partial discharges- Predictive maintenance and alerts thresholds- Use and configuration of the GenOSys web portal- Case study based on already deployed solutions
RELATED PRODUCTS
- Online connected solution for electric power generationsystems equipped with one or several generators.This is applicable for low, medium and high voltage.
*The Course is confirmed once at least 4 inter and/or intra company participants have signed up.
Training booking and information:www.lrsm.co/training-epg-en
20
PRA
CTI
CA
L IN
FOR
MAT
ION
Customized training
We can design and organize custom trainings on the definition, selection, operation and maintenance of alternators and AVRs products in order to meet your specific needs, whatever the context: new hires, special projects, reinforcement on core competencies…
The training can also focus on specific themes including:
- Grid Code- Marine specifications- Oil & Gas specifications- Hydro specifications- Maintenance optimisation
For those tailored trainings we will work in close relationship with you to answer your needs and bring you the very best of our expertise and know-how.
Those tailored trainings can be held at the Training Center, at one of our factories or on your premises, for groups up to 6 people.
21
PRA
CTI
CA
L IN
FOR
MAT
ION
Practical information and registration
POITIERS
BORDEAUXCOGNACSAINTES
LA ROCHELLE
ANGOULÊME
LIMOGES
Zone des Montagnes
CHAMPNIERS
N10
N10
N141
D910
Exit for Angoulême Nord Espace
Commercial et Hôtelier
Exit for Espace Commercial
et Hôtelier
Exit for LIMOGES then Angoulême Nord
Espace Commercial et Hôtelier
Training Center
Leroy-Somer Training Center39 rue des Figuiers - 16430 Champniers
GPS coordinates N: 45° 42,54.004’ - E: 0° 11,27.852’
Booking a training sessionBy phone: +33 (0)5 45 94 59 03 By email: [email protected] or [email protected] the website: www.lrsm.co/training-epg-en
As of 1st July 2017, Nidec Leroy-Somer complies with the 6 regulatory criteria defined by decree no. 2015-790 of 30 June 2015 relating to the quality of continuing vocational training activities. This law allows your financial organisation to take responsibility for training.
*Special rates have been agreed for anyone attending training courses at the Leroy-Somer CFE
Close to the Leroy-Somer Training CenterHôtel Ibis Rouge* - Angoulême Nord46 rue des Meneaux - 16430 ChampniersTél. 05 45 69 16 16
Hôtel Ibis Styles* - Angoulême Nord122 rue des Meneaux - 16430 ChampniersTél. 05 45 68 53 22
Hôtel Ibis Budget* - Angoulême Nord172 rue des Meneaux - 16430 ChampniersTél. 08 92 70 09 41
Hôtel Kyriad* - Angoulême Nord184 rue des Platanes - 16430 ChampniersTél. 05 45 68 03 22
B&B Hotel4 rue de la Croix Blanche - 16160 Gond-PontouvreTél. 08 90 10 67 04
Town CenterHôtel Mercure*1 place des Halles - 16000 Angoulême - Tél. 05 45 95 47 95
Hôtel du Palais*4 place Francis Louvel - 16000 Angoulême - Tél. 05 45 92 54 11
Citotel Europeen*1 place Gérard Pérot - 16000 Angoulême - Tél. 05 45 92 06 42
Hôtel Ibis Budget* - Angoulême Centre179 avenue Gambetta - 16000 Angoulême - Tél. 05 45 94 01 07
Hôtel Saint Antoine*2 rue du Gond - 16000 Angoulême - Tél. 05 45 68 38 21
Close to the StationBrit Hotel Confort Terminus*1 place de la gare - 16000 Angoulême - Tél. 05 45 92 39 00
22
PRA
CTI
CA
L IN
FOR
MAT
ION
General conditions of trainingGeneral Terms of Sale – Training Services
I- SCOPE OF APPLICATION
The Moteurs Leroy-Somer training centre (referred to hereinafter as the "Centre") designs, offers and conducts intercompany and intracompany training courses with a classroom-based learning or E- Learning format. The Centre also offers companies audit and operational advisory services. These services are collectively referred to as the "Centre's Service Offer".
II- PURPOSEThese General Terms of Sale of Training Services (referred to hereinafter as the "Terms of Sale") apply to all the Centre's Service Offers pertaining to orders placed with the Centre by any professional customer (referred to hereinafter as the "Customer"). By placing an order, the Customer fully and unreservedly accepts these Terms of Sale. The Customer acknowledges that he has received sufficient information and advice from the Centre to be able to form a decision as to whether the Service Offer meets his needs.
III- TRAINING SERVICES
1- Enrolment on any training course will only be recorded after theCentre has received a signed training agreement. The Centre willprocess enrolment applications in their order of receipt until the course is full. When a training course is intended for accredited electricians,the trainees must provide proof of accreditation before the start of thecourse in order to be able to work on live electrical equipment. TheCentre reserves the right to prohibit any trainee who has failed to prove accreditation from working on live electrical equipment; theCentre will not accept liability under any circumstances, in particularfor any physical accident. 2- For each training course a training agreement will be sent induplicate, which must be signed and returned to the Centre. TheCustomer will receive an attendance certificate on completion of thetraining course. The Centre reserves the right to modify the contentof a training course at any time without advance notice, in which case no compensation will be payable.3- When a training course is to be covered by a professional trainingfunding body (organisme paritaire collecteuragréé), the Customermust apply for funding before the start of the course andconfirmation of funding must be enclosed with the training agreement.If a course is partially funded, the Customer will be responsible forpaying the balance. If confirmation of funding is not received by thetraining course start date, the Centre will charge the Customer the fullamount.4- Postponement by the Centre. If an insufficient number of traineessign up for a course, the Centre reserves the right to postpone the course before the start date, in which case no compensation will bepayable. Cancellation or postponement of training by the Customer: If theCustomer cancels or postpones a scheduled training course he mustcompensate the Centre on the following basis: i) postponement or cancellation more than 30 days before the start date: no compensation; ii) postponement or cancellation within 30 days and more than 15days before the start date: 30% of the cost of the training will becharged; iii) postponement or cancellation within 15 days of the startdate: the Customer will be charged 70% of the cost of the training.
IV- ORDERS
Invoices are payable cash by bank draft or truncated bill of exchange, on receipt and within 30 (thirty) days of the end of the month in which the invoice was issued.A formal demand for payment will be sent in the event of non-payment
of any invoice on its due date; if payment is still not forthcoming the Centre will charge: - a late-payment penalty calculated from the due date on the basis ofthe total amount owed including VAT (if VAT is payable),- compensation for collection costs of at least €40, and all currentservices will be suspended. The late-payment penalty will correspond to the most recent EuropeanCentral Bank refinancing rate plus 10 points.If legal proceedings are necessary to collect payment, the outstandingamount will be increased by 15% (fifteen percent) or by at least €500(five hundred euros) excluding VAT, plus any applicable taxes.
VI- CONFIDENTIALITY
Both parties undertake to treat as confidential all technical, commercial, financial and other information received from the otherparty by word-of-mouth, in writing or by any other means ofcommunication during the negotiation and/or fulfillment of any order.This confidentiality obligation will apply throughout the fulfilment of the order and for a further 5 (five) years after its expiry or termination, irrespective of the reason.
VII- INTELLECTUAL PROPERTY
The Centre is the owner of the intellectual property rights to the training courses it offers. All the materials and content used by the Centre, irrespective of their form, shall remain the sole property of the Centre. The Customer is not entitled to use, reproduce, transform, or exploit the training materials within or outside of its company without the Centre's prior written agreement. The Customer also undertakes not to duplicate the training by dispensing it to another person, unless expressly authorized to do so.
VIII- DATA PROCESSING
Moteurs Leroy-Somer may process your personal data for the purposes of training. The data collected is necessary for this processing and will be used by Moteurs Leroy-Somer, its service providers and its subcontractors. The data will be retained for 6 years from the date on which it is collected. This processing is based on a legitimate interest of Moteurs Leroy-Somer to conduct training. In accordance with applicable law, you have the right to examine, to access, to have corrected, to have erased, to restrict and/or to object to the processing of your personal data; as well as the right to the portability of your personal data and the right to give instructions on what happens to your personal data after your death by sending an email to [email protected] accompanied by a document verifying your identity.
IX- DISPUTES
THIS CONTRACT IS GOVERNED BY FRENCH LAW.
IF THE PARTIES FAIL TO REACH AN AMICABLE AGREEMENT, AND NOTWITHSTANDING ANY CLAUSE TO THE CONTRARY, ANY DISPUTE RELATING TO THE INTERPRETATION AND/OR FULFILMENT OF AN ORDER SHALL BE REFERRED TO THE COURTS WITH JURISDICTION IN ANGOULEME(FRANCE), NOTWITHSTANDING THE INTRODUCTION OF THIRD PARTIES OR THE EXISTENCE OF MULTIPLE DEFENDANTS.
The Centre will detail its training offer and prices in a Service Offer, which will remain valid for one month after receipt of the Offer. On receipt of the order or signature of the order form included in the Offer,the Centre will draw up a training agreement.
V- PRICE-PAYMENT
Prices are stated exclusive of VAT and are valid for the term of theOffer or until a new catalogue is issued.If training takes place outside the Centre, all associated costs such astravel expenses incurred by consultants and trainers, room rental costs,the cost of documentation and of and the rental of training equipment(such as video recorders), etc. will be charged in addition.
CL /AB /10.04.2018v1
www.leroy-somer.com/epg
- 2019.09 / i5339 en
© Nidec 2018. The information contained in this brochure is for guidance only and does not form part of any contract. The accuracy cannot be guaranteed as Nidec have an ongoing process of development and reserve the right to change the specification of their products without notice.
Moteurs Leroy-Somer SAS. Siège : Bd Marcellin Leroy, CS 10015, 16915 Angoulême Cedex 9, France. Capital social : 65 800 512 €, RCS Angoulême 338 567 258.
Linkedin.com/company/leroy-somerTwitter.com/Leroy_Somer_enFacebook.com/LeroySomer.Nidec.enYouTube.com/LeroySomerOfficiel