Click here to load reader
Upload
atul-mehta
View
447
Download
0
Embed Size (px)
Citation preview
PRITHVI SINGH BHATIVII SEM EEM.E.C.R.C, JODHPUR
SUMMER PRACTICAL
TRAINING
AT
ITI BANGALORE-16
PREFACEPractical Training is a way to success in technical excellence with professionalism.I have gained practical knowledge by attending the Implant Practical Training session from INDIAN TELECOM INDUSTRY, Bangalore, during the period of 14-05-2010 to 11-
06-2010 in the following areas:
Research & Development Switching Access Products Telephone Defense Products Information TechnologyI am highly benefited by completing this summer Training.
ACKNOWLEDGEMENT
I am very grateful to my esteemed professors of M.E.C.R.C. who have given their best critics & inspired me to work hard for the Implant Practical Training.
After that I would like to thank T. Krishnadas Rai (Chief Manager-HR[ED]) , ITI Limited, Dooravaninagar, Bangalore-16 for believing me & providing enriched practical knowledge.
I am highly thankful to my parents & my dear friends who supported me in completing this training.
CONTENTS
Switching Transmission Power supply SCADA SMPS PCB Plant Defence
MOBILE COMMUNICATION
GSM CDMA
Base Trans-Receiver Station (BTS) “BTS A-9100”, is radio frequency mobile communication product based on GSM technology.
It is a set of equipments that facilitates wireless communication between user equipment (UE) and a network.
GSM PRODUCTS
Code division multiple access (CDMA) is a channel access method utilized by various radio communication technologies.
CDMA employs speared-spectrum technology and a special coding scheme.
Allows multiple users to be multiplexed over the same physical channel.
CDMA PRODUCTS
SOLAR PHOTO VOLTAIC POWER SUPPLY
Uninterrupted Power Source Unmanned Operation Powers small exchanges & other telecom equipment Low running cost Noise free, pollution free & maintenance free 100% protection from environmental conditions Long Life Modular Design Used for Rural Radio Telephones, Power Plants, Road Traffic
Signals, Railway Signals
SCADASupervisory Control And Data Acquisition
Control & analysis of real time data LAN based control & remote terminals Database Management Applications:
-Railway Traction Power Control-Power Distribution Networks-Process Control, Steel, Coal & Water Management
SMPS(Switch Mode Power Supply)
It is used for telecom stations. Exchange, Transmission equipments,
Cellular, Microwave, Expanded by adding racks. Convection cooling, operation up to 60°C. Configurable to work with Lead Acid Battery
also, apart from Valve Regulated Lead Acid Battery (VRLA).
PCB PLANT
PROCESS: A size of 2.4mm is cut to make a motherboard with c=17.5µΏ. Copper clad lamination. CNC Drilling (Comportised Numerical Control) PTH (Plated through hole) & Panel Plating Photo resist lamination (120°C temp.) UV Exposing Developing (30°C temp.) Electro Copper pattern plating (17.5µΏ) Tin pattern plating Resist Stripping (casting soda & water on 50°C) Etching (Ammonia Sulphate at 50°C) Tin Stripping (HNO3 AT 105°C) Solder Mask Coating (Tin & Lead mix & heat at 250°C) Solder Mask Developing (40°C) HAL (Hot Air Leveling) Legend Marking/ Legend Print (Excellence Automation)