Trans Canada Turbines

Licensed Overhaul and Repair Maintenance Service Provider forAeroderivative Industrial Gas Turbines

Head Office:TransCanada Turbines Ltd.150 Palmer Road NECalgary, Alberta, CanadaT2E 7R3Tel: +1 403 219 6600Fax: +1 403 219 6603Email: [email protected]: www.tcturbines.com

TransCanada Turbines

TransCanada Turbines Ltd. (TCT) is an independent overhaul and repair maintenance service providerwith over ten (10) years experience in the industry. TCT is licensed by General Electric and Rolls-Royceon all marks of the following aero-derivative industrial gas turbines: GE LM2500, LM2500+, and LM6000;and Rolls-Royce Avon, RB211 and RB211 DLE. TCT operates a total of six (6) locations, including two(2) overhaul depots, four (4) field service satellite offices, and one (1) solely owned and operated test cell.All office and shop space is used solely by TransCanada Turbines.

TransCanada Turbines offers technical support and service 24 hours, 365 days a year to almost anywhere inthe world. The head office and Rolls-Royce depot is located in Calgary, Alberta, and the GE depot islocated in Airdrie, Alberta. Field service satellite offices are located in Bakersfield, California; Syracuse,New York; Houston, Texas; and Cumbernauld, Scotland.

Calgary Depot (Canada)TransCanada Turbines' Rolls-Royce depotin Calgary, Alberta comprises 2,600 m²(28,000 ft²) shop space with an additional1,000 m² (10,764 ft²) of office space. Thisfacility is TCT’s main repair and overhaulservice building for Rolls-Royce Avon,RB211 and RB211 DLE gas turbines.Multiple strip and build pots and dedicatedwork space for major functions of theoverhaul process allow for maximum

utilisation of shop space and the ability to have multiple units in the shop at any given time. The Calgaryfacility has on-site cleaning, inspection, non-destructive testing, kitting, building and balancing capabilities.This depot facility is within ten (10) minutes of the Calgary International Airport.

EquipmentThe Calgary facility is equipped with complete tooling, balance equipment, overhead cranes, and strip andbuild stands required to perform scopes of work from minor inspection through to complete overhaul andrefurbishment.

Airdrie Depot (Canada)TransCanada Turbines Level 4 GE Licensedfacility in Airdrie houses more than 32,000 sq ft ofrecently upgraded shop space and 8,000 sq ft ofoffice space. This standalone facility is dedicatedto the maintenance and overhaul of GE LM2500,LM2500+ and LM6000 gas turbines, and iscomplete with spare parts inventory, cleaning, non-destructive testing, kitting, build and balancingcapabilities. The recent addition of more buildstands and the renovation of storage space intoadditional work space has enabled TCT to increaseits capacity, and undertake a larger number of overhauls and major repairs simultaneously.

EquipmentThe Airdrie facility is equipped with complete tooling, balance equipment, overhead cranes, and strip andbuild stands required to perform scopes of work from minor inspections or service bulletin implementationthrough to complete overhauls and refurbishment.

Cumbernauld Office (U.K)TransCanada Turbines (U.K.) Ltd. is located inCumbernauld, Scotland. The UK satellite office hasapproximately 14 000 sq/ft of office and shop space,and is complete with a 16 tonne overhead crane, spareparts inventory, and LM2500 and LM6000 Level IItooling. The Cumbernauld office also provides supportfor servicing the Rolls-Royce Avon and RB211 enginelines. Staff located at the Cumbernauld office includespart sales representatives, regional sales managers forEurope, the Middle East and Africa, administrativesupport staff, and field service technicians.

Houston Field Service and TransCanada TurbinePackaged Power Parts (U.S.A.)TransCanada Turbine Packaged Power Parts office islocated in Houston, Texas. Approximately 5000 sq/ftof shop, warehouse and office space houses a largeinventory of LM2500 and LM6000 spare parts forboth turbine and power package. TCT PackagePower Parts is able to provide parts sales, service andtechnical guidance to almost any location worldwide. Staffed with sales representatives, field servicetechnicians and office support staff, the Houstonfacility includes a 30 tonne overhead crane, 3 turbinemaintenance dollies, Level II tooling for the LM6000

PA & PC, and Level II tooling for the LM2500. Service representatives are available 24 hours a day.

Bakersfield Office (U.S.A.)The West Coast office of TransCanada Turbines Inc.is located in Bakersfield, California. This 3500 sq/ftsatellite office has shop space, borescope equipment,maintenance dollies, an LM2500 power turbinestand, LM2500 Level 1 & Level 2 tooling, andLM6000 tooling. Additionally, the West Coastlocation is well stocked with spare parts inventory,and is used as a base of operations for six mechanicaltechnicians, a controls specialist, regional salesmanager, parts sales specialist, and office supportstaff including shipping and receiving.

Syracuse Office (U.S.A.)TransCanada Turbines Inc. East Coast Office is locatedin Syracuse, New York. 4000 sq/ft of shop and officespace enable up to Level II service to be performed onGE LM2500 and LM6000 engines in a climatecontrolled environment. This field service office alsohas LM6000 and LM2500 Level II tooling andmaintenance dollies, and spare parts inventory. Basedat the East Coast office are field service technicians,part sales representatives, and controls specialists, aswell as office support staff.

Testing CapabilitiesTransCanada Turbines owns and operates a Rolls-Royce Category 1 approved test cell, located at theCalgary facility. Opened in June of 1998, this 930 m² (10,000 ft²) test cell is capable of testing all marks ofthe Avon, RB211 and RB211 DLE, as well as the General Electric LM1500 and LM2500. TransCanadaTurbines performs all tests with natural gas, and is the first Maintenance, Repair and Overhaul Centre toachieve approval from Rolls-Royce for Verification, Configuration, Calibration, Competency, Testing andPerformance Analysis program compliancy to Rolls-Royce OIA52 Process.

In addition to performing all tests to Rolls-Royce test specifications and requirements, TCT tests enginedata against trend expectations to ensure that the data collected is within normal and expected limits.During engine trending, data is analyzed to ensure that no unusual characteristics are prevalent with theoperation of the engine. Vibration analysis conducted on all engines includes acceleration and decelerationvibration survey, and the use of a vibration spectrum analyzer to check the engines’ vibrationcharacteristics against standards and trend expectations.

In 2004 TCT opened its cold end drive test facility for General Electric LM6000 PA and PC industrialaero-derivative gas turbines in Strathmore, Alberta 56 kilometres east of Calgary. The test facility enablesTCT to test the LM6000 against a live power grid in a similar situation to a customer’s actual operatingconditions.

Joint VentureTransCanada Turbines is an equally owned, joint venture partnership between TransCanada Corporation, ofCalgary, Alberta, Canada; and the Wood Group, of Aberdeen, Scotland.


TransCanada Turbines Experience & Capabilities

Since commencing operations in 1998, TransCanada Turbines has grown to become a well known andrecognized service provider in the market for the overhaul, repair and service of aeroderivative industrialgas turbines manufactured by General Electric and Rolls-Royce.

CertificationsCopies of the following Certifications are included following this section:

1. Rolls-Royce Avon Certificate (copy)2. Rolls-Royce RB211 Certificate (copy)3. Rolls-Royce Avon Test Certificate4. GE Authorisation Letter

Customer ReferencesTransCanada Turbines has included Customer References for each engine type after this section.

Rolls-Royce Avon and RB211

Since 1998 TCT has been licensed by Rolls-Royce toprovide complete overhaul and repair maintenanceservices to all variants of the Avon, RB211 and RB211DLE families of gas turbine. TCT operates licensedoverhaul depot and a Rolls-Royce certified Test Cell atthe Calgary, Alberta facility.

TransCanada Turbines has worked extensively aroundthe world on various configurations of the Avon, operating in both compression and power generationapplications, both onshore and offshore. TCT’s Avon Field Service capabilities include inspections,repairs, technical guidance, and Module Exchanges. Zero-time overhauls, parts repairs, mid-life overhaulsand major repairs are performed at the Calgary Depot. TCT has a strong network of Rolls-Royce approvedvendors for specialized component repairs. TCT’s Test Cell at the Calgary, Alberta facility is the firstMaintenance, Repair and Overhaul Centre to achieve approval from Rolls-Royce for Verification,Configuration, Calibration, Competency, Testing and Performance Analysis program compliancy to Rolls-Royce OIA52 Process.

TCT is fully licensed by Rolls-Royce to provide overhauland repair maintenance services to all variants of the RB211and RB211 DLE. Field service capabilities includeinspection, calibration, repair, Module Exchange, removaland installation. Depot work includes major repairs, zero-time overhauls, mid-life overhauls, and upgrades. TCT’sTest Cell at Calgary is Category 1 Certified by Rolls-Royceto provide testing on all variants of the RB211.

Total OverhaulsThe following table provides an approximate major work scope total for the Avon and RB211.

Engine Overhauls & MidlifeRolls-Royce Avon 111 (approximately)Rolls-Royce RB211 88 (approximately)

Major ContractsIncluded in a table on the following page is an outline of TransCanada Turbines Major Avon and RB211contracts, either ongoing or completed.


TransCanada Turbines: Rolls-Royce Avon & RB211 Major Contracts

Customer Engine Type Location Scope of Work Commencement DateOxy Permian RB211 North

AmericaTCT performed a conversion to upgrade an RB211-24C to an RB211-24G. Conversion and mid-life overhaul was performed inapproximately 60 days. April 2008

In Salah Gas RB211 Algeria Long Term Service Agreement, encompassing both Scheduled andUnscheduled work. Work scopes include complete overhauls, fieldservice, repairs and technical support. Training component includesTCT providing training for In Salah Gas engineers and technicians. 2007

Marathon Oil RB211 UK &Europe

Long term, Master Services Agreement, servicing multiple engines (10units), located at offshore installations. Includes complete overhauls,repairs, technical support and unscheduled maintenance. 2006

Perenco Avon & RB211 UK &Europe

Through a long term, multi-unit Master Services Agreement, TCTprovides overhaul, repair, and technical support services to bothPerenco’s Avon and RB211 gas turbines. Engines are located at off-shore installations. 2004

TransCanada Pipeline(TCPL)

Avon & RB211 NorthAmerica

TCPL is the largest RB211 operator in the world. Current contract is along term, multi-unit agreement. Units are located throughout NorthAmerica. Agreement includes overhauls, repairs, field service, andtechnical assistance on both the Avon and RB211 gas turbines. 1998

Alyeska Pipeline Avon Alaska TCT provides overhaul, repair and technical support services toAlyeska Pipeline’s Avon gas turbines. While not under an exclusiveagreement, TCT and Alyeska have a long term, professionalrelationship. 2005

NiSource (ColumbiaGas & Columbia Gulf) Avon

NorthAmerica

Long term TCT customer since 1998. Current Master ServicesAgreement includes scheduled and unscheduled repairs, technicalsupport and overhauls of NiSource’s Avon engines. 1998

Eustream (SPP) RB211EasternEurope

Master Service Agreement, for Scheduled and Unscheduled work,field service, repairs, and overhauls. 2006

Chevron Cabinda RB211 AfricaMaster Service Agreement, major points of agreement include RotableModule Exchanges and in-field mid-life overhauls. 2007


General Electric LM2500 and LM6000

TransCanada Turbines (TCT) has been fully licensed on the GE LM2500, LM2500+ and LM6000aeroderivative industrial gas turbines since the doors opened for business in 1998. TCT is licensed on allvariants, including DLE.

The LM2500 and LM2500+ industrial gas turbine is usedextensively throughout the world in compression, powergeneration and marine power applications. As a licensedoverhaul and maintenance service provider with over tenyears in the industry, TCT has the technical experienceand proficiency to perform many variations of scopes ofwork, both in depot and onsite. Onsite work scopes areperformed up to Level 2, and include inspections, minor

repairs, and hot section exchanges. Works performed at TCT’s licensed Depot near Calgary, Alberta,Canada, are up to Level 4 work scopes, and include major repairs and zero-time overhauls. The Depot iscomplete with multiple build stands, inspection, clean line, minor component repair, build, balance andkitting capabilities. The Calgary test facility is capable of testing the LM2500, while the LM2500+ andDLE variants are tested at another facility.

TCT is fully licensed on all variants of the LM6000. TheLM6000 is primarily used in power generation applications,and are isntalled around the world. TCT is licensed to provideup to Level 2 service onsite, and up to Level 4 at TCT’sauthorized Depot near Calgary, Alberta, Canada. Level 2services include inspection, minor repairs, Hot Sectionexchanges and other rotable exchanges. The Level 4 licenseddepot can perform major repairs, zero-time overhauls andmodule rebuilds.

TransCanada Turbines tests the LM6000 engine at a customized power plant located near the overhaulfacility in Strathmore, Alberta. The LM6000 is tested in a package at an operating power plant. TCTmodified the existing package to enable a fast turn-around-time when testing. By using a modifiedpackage, the engines are tested in a situation almost identical to a customer’s actual operating conditions.

Total OverhaulsThe following table provides an approximate major work scope total for the LM2500 and LM6000.

EngineType

Overhauls & HotSection Exchanges

GE LM2500 92 (approximately)GE LM6000 69 (approximately)

Major ContractsIncluded in a table on the following page is an outline of TransCanada Turbines Major LM2500 andLM6000 contracts, either ongoing or completed.


TransCanada Turbines: GE LM2500 & LM6000 Major Contracts

Customer Engine Type Location Scope of Work Term of AgreementDuke LM2500 &

LM6000 FleetSouth America &

North AmericaStanding agreement to provide major and minor repairand maintenance services to LM2500 and LM6000 fleetlocated in both North America and South America.

Long term customer relationship,current agreement is long term,

multi-unit.BP Gulf of Mexico 11 x LM2500 Gulf of Mexico Exclusive, full spectrum Long-term Service Agreement

(LTSA) incorporating major & minor scheduled,unscheduled and field service repairs and work. Long Term Agreement

TransCanada Pipeline LM2500 Fleet North America Standing agreement for scheduled and unscheduledmaintenance, both onsite and in depot.

Ongoing – multi-year/multi-unitagreement

DONG Energy 2 x LM2500 Europe

Full spectrum Long-term Service Agreement (LTSA)incorporating major & minor scheduled, unscheduledand field service repairs and work. Current long term agreement

Global 3 4 x LM6000 PC Spain

Exclusive, full spectrum Long-term Service Agreement(LTSA) incorporating major & minor scheduled,unscheduled and field service repairs and work. Ongoing, multi-year agreement

TransCanada Energy 6 x LM6000 PD North AmericaFired-hour agreement incorporating field service,scheduled and unscheduled repairs and maintenance. Ongoing, multi-year agreement

Viking Gas LM6000 PA United KingdomStanding Field Service Agreement to perform AnnualScheduled Maintenance. Annual Agreement

CCG MartiniqueLM6000 PA &

LM6000 PC Caribbean

Full spectrum Long-term Service Agreement (LTSA)incorporating major & minor scheduled, unscheduledand field service repairs and work. Ongoing

Golden Valley ElectricAssociation 1 x LM6000 Alaska

Exclusive, full spectrum Long-term Service Agreement(LTSA) incorporating major & minor scheduled,unscheduled and field service repairs and work. Long term agreement – Ongoing


TransCanada Turbines: Certifications

1. TCT Rolls-Royce Certificate2. TCT Rolls-Royce Avon Test Certificate3. TCT Rolls-Royce RB211 Certificate4. TCT GE Authorisation Letter

GE Energy Aero Energy Greg Talley Services Strategic Development Services Licensing One Neumann Way, M.D. S155 Cincinnati, OH 45215-1988 USA T 513-552-3320 C 513-607-0593 F 513-552-2882 [email protected]

11 June 2009 TransCanada Turbines Limited 150 Palmer Road, NE Calgary, Alberta, Canada T2E 7R3 Subject: TransCanada Turbines (TCT) LM Service Center Authorization and Capability

Subject to the terms and conditions of the licensed service provider’s agreement between TCT and GE, TCT is authorized and qualified to provide full Level 4 maintenance, repair, overhaul and test on specific models of the LM2000 gas generators and gas turbines, LM2500 gas generators and gas turbines, LM2500+ gas generators and gas turbines (excluding the High Speed Power Turbine) and the LM6000 family of gas turbines.

This agreement has been in effect since 1 January 2009 and as of the date of this Letter of Authority; the agreement is in full effect. GE and TCT are not at liberty to discuss the provisions of the license agreement, including term.

With regards,


TransCanada Turbines: Customer References

1. Avon Customer References2. RB211 Customer References3. LM2500 Customer References4. LM6000 Customer References

TRANSCANADA TURBINES AVON CUSTOMER REFERENCES

Bill BeaverDirector/SuperintendentField ServicesBruce Power1700 MacCorke Avenue S.E.Charleston, West Virginia, USAPhone: (304) 357-2267Fax: (304) 357-2902

Sonia IvansAsset Reliability- Equipment ManagerTransCanada CorporationPhone: 403.920.5516Cell: 204.470.4276Fax: 403.920.2394Email: [email protected]

Jim ScottTurbine SpecialistColumbia GulfSuite 100, 201 EnergyLafayette, LA, USAPhone: (337) 266-4691Fax : (337) 266-4660

Paul BodienSenior Rotating Equipment EngineerDUGAS (Dubai Natural Gas Co)P.O. Box 4311Dubai, United Arab EmiratesPhone: 011971 - 4804 7737Fax: 011971 – 4884 5948

Jerry DeHaasSenior Rotating Equipment EngineerAlyeska Pipelines615 Bidwell AveFairbanks, Alaska 99701Phone: 907 450-7672Fax: 907 [email protected]

TRANSCANADA TURBINES RB211 CUSTOMER REFERENCES

Jordy MillerRB211 Fleet ManagerTransCanada PipeLines450 - 1st. Street, S.W.Calgary, Alberta T2P 1H5Phone: (403) 920-7009Email: [email protected]

Ken BizzellTed Romley (Alternate Contact)Superintendent Production MaintenanceCabinda Gulf Oil Company LimitedPhone: (925) 842-1111 Ext. 2378Fax: (925) 842-1111 Ext. 2556Email: [email protected]

Terry LockeRotating Equipment EngineerPerenco UK LimitedThames HouseThamesfield Way, off Pasteur RoadGreat YarmouthNorfolk NR31 0DWPhone: 01493-414011Email: [email protected]

Terry SmallVP OperationsOccidental PermianWUCRP WassonCO2 Recovery Plant2582 Country Road 355Denver City, TX, US79323Phone: (806) 215-4058Fax: (806) 592-7301

Patrik HrnkoOperation and MaintenanceDepartment of Compressor StationsEustreamPrevadzkovy usekVihorlatska 8949 01 NitraSlovak RepublicPhone: +421 37 691 2215Email: [email protected]

Martin WylieReliability Team LeaderMarathon OilMarathon House, Anderson DriveRubislaw Hill, Aberdeen AB15 6FZPhone: 01224 803960Email: [email protected]

Svend Tarald KibsgaardBrahim Abdelaziz (Alternate Contact)Rotating Equipment EngineerIn Salah GasEmail: [email protected]

Isabelle LindroosRotating Equipment/Mechanical EngineerIn Salah GasEmail: [email protected]

Taher ZahedRotating Equipment/Mechanical EngineerIn Salah GasEmail:[email protected]

TRANSCANADA TURBINES LM2500 CUSTOMER REFERENCES

James BatemanMajor Equipment ManagementTransCanada Corporation450 – 1st Street S.W.Calgary, AlbertaT2P 5H1Phone: (403) 920-2885Fax: (403) 920-2394E-mail: [email protected]

Carsten SorensenOffshore TechnologyFacilities and TechnologyDong Energy A/S - E & P.Agern Allé 24-26DK - 2970 HørsholmPhone: +45 45 17 10 22Fax: +45 45 17 10 44Email: [email protected]

Alexander KaminskiHead of Machinery / Process EquipmentGroupMaterials Management & ProcurementDivisionE.ON Ruhrgas AGHuttropstrasse 6045138 EssenGermanyPhone: +49 (201) 184-3866Fax: +49 (201) 184-4106E-Mail: [email protected]

TRANSCANADA TURBINES LM6000 REFERENCES

Jeff WhitePlant ManagerSMUD (Carson Energy Group)8580 Laguna Station RdElk Grove, CA 95758Phone (916) 394 2930E-mail: [email protected]

Luis SanchezProject CoordinatorTransAltaBox 1900, Station “M”100-12th Avenue SWCalgary, AlbertaPhone (403) 267 7589E-mail: [email protected]

Kenneth LarsonPlant ManagerSilkeborg Kraftvarmevaerk A/SPhone +45 87 200 160 (Main No.)Phone +45 87 200 162 (Direct No.)E-mail: [email protected]

Wes KnappOildale Energy LLCEnpower Management Corp.1134 Manor St.Bakersfield, CA 93388Phone: (661) 392 0301Cell: (661) 703 3402E-mail: [email protected]

Lynn ThompsonGas Turbine Plant ManagerGolden Valley Electric Association758 Illinois StreetPO Box 71249Fairbanks, AK 99707-1249Phone: (907) 451 5615Cell: (907) 460 2847E-mail: [email protected]


Health, Safety & Environment

Maintenance of strong Health, Safety and Environment incident prevention and employee educationprograms are a top priority at TransCanada Turbines (TCT). All HS&E policies are sponsored by uppermanagement, and all employees are encouraged to read, understand and apply the HS&E Policies tocontinue to work safe. Through remaining dedicated to HS&E awareness across the company, TCT hascontinued to uphold an excellent HS&E record. TransCanada Turbines has an active Health, Safety &Environment Manual and an ‘Emergency Response Handbook’, both of which are readily available to allemployees.

Health and Safety Strategy

TCT believes that Health & Safety are an integral part of every process, and consistently strives to achievezero accidents in all aspects of the business. TCT’s HSE manual challenges and directs Management tocreate a safe work environment for all, and makes them directly accountable for work place injuries. Inorder to successfully realize HSE goals, it is imperative that all employees are fully aware of their vitalroles and responsibilities within the active Safety Management System. The HSE manual has beendesigned to clearly set out these requirements and responsibilities.

Company HSE Values and System Operation

TransCanada Turbines is extremely proud of its Health & Safety performance over recent years. It is firmlybelieved that robust leadership, clear goals and targeted resources have allowed a company wide safetyculture to flourish. The system functions with a continuous learning and improvement cycle as the basis,and openly encourages all suggestions, recommendations and experiences. Reporting of incidents or therefusal of unsafe work practices are not penalized; and ‘near miss’ reporting is actively encouraged andtreated as a valuable learning experience for prevention of future incidents and improvement of currentpolicies. Core values, strategies, rules, regulations and requirement are listed within the HSE manual,along with process requirements that ensure the continuous improvement cycle operates.

Supplemental InformationTransCanada Turbines commitment to Health, Safety & Environment excellence is further demonstrated bythe inclusion of a copy of TCT’s HS&E Policy Statement.


Quality

TransCanada Turbines believes in delivering the highest quality service, regardless of the workscope. TCTis ISO 9001:2000 certified by Lloyd’s Register Quality Assurance, and maintains an internal QualityProgram and a Quality Assurance Manual in accordance with the specifications of the ISO certification.TCT ensures that the delivery of services is conducted in compliance with the ISO 9001 Standard, allapplicable Original Equipment Manufacturer (OEM) technical procedures and TCT’s quality processes &working procedures.

Technical & Quality Standards

TransCanada Turbines conducts business in compliance with the documented Quality Processes &Working Procedures that constitute the Quality Management System. All processes are subject to ongoingreview and continual improvement to ensure that the boundaries of ‘industry best practice’ are constantlypushed. The documentation, implementation and consistent execution of these quality processes are someof the critical success factors to ensuring that the highest technical & quality standards are upheld, thusensuring that TCT consistently meets or exceeds customer requirements.

TransCanada Turbines has a team of trained internal auditors who conduct scheduled internal audits tomonitor and improve the effectiveness of quality processes. Monthly Quality Committee meetings areconducted to provide a forum for discussion and resolution of quality issues, drive continual improvementinitiatives, progress customer issues and review Internal Audit findings. This forum also provides a conduitto share best practices and lessons learned throughout the business. As a licensed Repair & Overhaulfacility, TCT has direct access to comprehensive technical support services from the OEM’s. This helps toensure that timely and well thought out technical judgments and decisions can be made to provide the bestpossible service to customers. TCT provides technical independence and expertise that is based on regulartechnical support and liaison from the OEM’s, an excellent rapport with the OEM’s, and on the experienceand expertise of the diverse group of employees at TCT.

Supplemental DocumentationCommitment to Quality at TransCanada Turbines is further evidenced through the followingdocumentation:

1. TransCanada Turbines Quality Assurance Statement2. TCT ISO 9001:2000 Certificate

@CERTIFICATE OF APPROVAL

This is to certifythat the Quality Management Systemof:


Calgary, Alberta, Canada

has been approved by Lloyd'sRegisterQuality Assuranceto the following Quality Management SystemStandards:

ISO 9001:2000

The Quality Management Systemisapplicable to:

Inspection, Repair, Overhaul, Testing and FieldServicing of Industrial Gas Turbines Manufactured

by Rolls-Royce and General Electric.

This certificate is valid only in associationwith the certificate schedule bearing the samenumber on which the locations applicableto this approval are listed.

ApprovalCertificate No: UQA 0111335

Original Approval: January 19, 1999

Current Certificate: February29, 2008

Certificate Expiry: January31,2011

Issued by LRQA, Inc. Houston

oThisdocumentissubjectto the provisionon the reverse1401EnclaveParkway,Suite 200, Houston, Texas 77077, USA

This approval iscarried out in accordance with the lRQA assessment and certification proceduresand monitored by LRQA.MKtoR8o/isionU

@CERTIFICATESCHEDULE


Locations Activities

Head Office & Calgary DepotCalgary,Alberta, Canada

Inspection, Repair, Overhaul, Testing andField Servicing of Industrial Gas TurbinesManufactured by Rolls-Royce and GeneralElectric.

Airdrie DepotAirdrie, Alberta, Canada

Inspection, Repair, Overhaul, Testing andField Servicing of Industrial Gas TurbinesManufactured by General Electric.

Bakersfield, California, USA Field Servicing of Industrial Gas TurbinesManufactured by General Electric.

Central Square, New York, USA Field Servicing of Industrial Gas TurbinesManufactured by General Electric.

Houston, Texas, USA Field Servicing of Industrial Gas TurbinesManufactured by General Electric.

Liverpool, United Kingdom Field Servicing of Industrial Gas TurbinesManufactured by Rolls-Royce and GeneralElectric.

ApprovalCertificate No: UQA 0111335

Original Approval:Current Certificate:

Certificate Expiry:

January 19, 1999February 29, 2008January 31, 2011

Page 1 of 1

Approval Certificate No: UQA 0111335

This document is subject to the provision on the reverse1401 Enclave Parkway,Suite 200, Houston, Texas 77077, USA

This approval is carried out in accordance with the lRQA assessment and certification proceduresand monitored by lRQA.MKfOIl8Yi$ion13

Documents

Trans Canada Turbines