advanced air pipe systemsProduct catalog

2

Garage-Pak, advanced air pipe systems

Garage-Pak technologyThe innovative technology of Garage-Pak enables rapid and easy assembly:quick connection of components to the aluminum pipe.

Technical specifications Suitable fluids:

• Compressed air(dry, wet, lubricated)

• Vacuum • Inert gas:

argon, nitrogen (other fluids,please consult us)

Max working pressure:• 235 psi - please consult us

for temperature range• 188 psi from -4°F to +140°F

Vacuum level:• 98.7% (29.6" Hg)

Normal working temperature:• From -4°F to +140°F

Excellent resistance to:• Compressor oils

(mineral or synthetic)• Ultra-violet rays

(For other fluids please consult us)

Storage temperature:• From -40°F to +176°F

CertificationOur manufacturing process includes individual con-trol and unit dating for all Garage-Pak fittingsand pipe, in order to guarantee their quality and traceability.Regarding security, Garage-Pak conforms toEuropean standard 97/23 CEE - § 3.3 (equipment under pressure).

Identification

Garage-Pak is an innovative compressed air pipe system for the distribution of air, easy toassemble thanks to its rapid connection technology. With a wide product range and manyaccessories, Garage-Pak helps you with your air system projects by offering a modern andenergy efficient solution.

Double clamp ring

Engage the nut and double clampring onto the pipe; then tighten

1/2 turn with a spanner

and the connectionis secured

• Quick connection with double clamp ring63 mm

Gripping ring Insert the pipe into the component The connection is secured

• Quick connection with gripping ring16.5 mm - 25 mm - 40 mm

Part numbers have been chosen by a method ofmnemonics. Each Garage-Pak component is identified by:

• Its series• Pipe OD• Thread code or second pipe OD

Series

Ø Pipe OD

Thread code or pipe OD6661 40 21

Garage-Pakmeets the

requirements of

ASME B31.1

Garage-Pakmeets the

requirements of

ASME B31.3

Garage-Pak components are non-flammable, with no propagation of flame. Materials are 100 % recyclable. Garage-Pak pipe, fittings and valves are guaranteed silicone free.

Garage-Pak

3

4-5

6

7

8

9

10-11

11

12

13-15

16

17

18

Contents

Pipe-to-pipe and Threaded connectors

Aluminum pipe & Flexible hose

Quick assembly brackets

Ball valves

Wall brackets

Tools

Pressurized system outlets

Fixture accessories

Composite automatic safety couplers

Blowgun

FRLs, Automatic drain & Accessories

Index

Pipe-to-pipe and threaded connectors

Male threaded connector, NPT thread

ØD C Transair® E G H16.5 1/4 6605 17 14 9.5 34.0 62.5 3.67

16.5 1/2 6605 17 22 15.0 34.0 68.0 4.09

25 1/2 6605 25 22 15.0 44.5 70.5 9.52

25 3/4 6605 25 28 15.0 44.5 71.5 11.64

25 1” 6605 25 35 16.0 44.5 71.5 7.05

40 1” 6605 40 35 16.0 67.0 111.5 8.11

40 1”1/4 6605 40 43 21.5 67.0 111.5 15.49

40 1”1/2 6605 40 50 24.5 67.0 114.5 21.69

63 2” 6605 63 44 20.0 91.0 118.5 36.33

63 2”1/2 6605 63 41 25.0 91.0 130.5 47.62

oz

6605 Equal elbow

ØG

L

Z

ØD

Z

ØD Transair® G L Z16.5 6602 17 00 34.0 58.0 31.0 2.43

25 6602 25 00 44.5 68.0 40.0 3.77

40 6602 40 00 67.0 107.0 45.0 11.32

63 6602 63 00 91.0 122.0 61.0 33.86

oz

6602

45° elbow

ØG

L

Z

ØD

Z

ØD Transair® G L Z25 6612 25 00 44.5 57.0 29.0 4.06

40 6612 40 00 67.0 90.0 45.0 13.40

oz

6612Equal pipe-to-pipe connector

ØG

L

ØD

Z Z

ØD Transair® G L Z16.5 6606 17 00 34.0 120.5 33.5 2.50

25 6606 25 00 44.5 151.5 48.0 4.55

40 6606 40 00 67.0 205.0 57.0 12.13

63 6606 63 00 91.0 171.5 25.0 28.92

oz

6606

4

Materials6605 16.5 - 25 - 40 63

• Body Treated-brass Treated brass• Nuts Polyamide with Fiberglass Treated aluminum

6606/6676/6602/6612/6604 16.5 - 25 - 40 63• Body Polyamide with Fiberglass Treated aluminum • Nuts Polyamide with Fiberglass Treated aluminum

Equal pipe-to-pipe connector with vent

ØG

L

ØD

Z Z

ØD Transair® G L Z25 6676 25 00 44.5 151.5 48.0 4.55

40 6676 40 00 67.0 205.0 57.0 11.32

63 6676 63 00 91.0 171.5 49.0 29.63

oz

6676 Equal tee

ØG

LZ1

ØDHZ2

Z1

ØD Transair® G H L Z1 Z216.5 6604 17 00 34.0 58.0 120.5 33.5 31.0 5.29

25 6604 25 00 44.5 67.5 151.5 48.0 40.0 6.38

40 6604 40 00 67.0 102.5 205.0 57.0 57.0 21.48

63 6604 63 00 91.0 122.0 245.0 61.0 61.0 47.62

oz

6604

Supplied with LF3000 and 5/16"(8mm) plug.

• Quick connection• Full bore design• Interchangeable and reusable• Non-flammable materials(UL94-HB standard) The range of Garage-Pak pipe-to-pipe and stud connectors provides

versatility of design and helps to overcome constraints often encounteredwith the structure of industrial buildings

• Max working pressure:- 235 psi – please consult us for temperature range

- 188 psi from -4°F to +140°F• Vacuum level: 98.7% (29.6" Hg)• Working temperature: -4°F to +140°F

Garage-Pak

Equal cross

L2L1

Z1

Z2

ØG

ØD Transair® G L1 L2 Z1 Z225 6607 25 00 44.5 152.0 135.0 48.0 40.0 8.47

oz

6607

Unequal tee

ØG

L

Z1

ØD2

ØD1Z2

H

ØD1 ØD2 Transair® G H L Z1 Z263 40 6604 63 40 91.0 161.0 245.0 61.0 116.0 3.31

lbs

6604

5

Materials6604/6607/6625 16.5 - 25 - 40 63

• Bodies Polyamide with Fiberglass Treated aluminum• Nuts Polyamide with Fiberglass Treated aluminum

6621:Treated aluminum

6666/6651 16.5 - 25 - 40 63• Bodies Treated brass Treated aluminum• Nuts Polyamide with Fiberglass Treated aluminum

Male adapter, NPT thread

ØD

C

L

H

Ø 6

3

Ø 40

61

116

2580

Ø 63

Ø 40

ØD C Transair® L H16.5 R1/2 6621 17 22 42.2 5.0 0.70

25 R1/2 6621 25 22 49.0 7.0 1.23

25 R3/4 6621 25 28 49.0 7.0 2.01

40 R1"1/4 6621 40 43 73.7 8.0 4.90

40 R1"1/2 6621 40 50 75.7 10.0 6.07

oz

6621Vented end-cap

ØG

E

ØD

L

H

ØD Transair® E G H L16.5 6625 17 00 25.5 34.0 45.5 62.5 3.39

25 6625 25 00 33.0 44.5 47.0 75.0 3.39

40 6625 40 00 34.5 67.0 55.0 98.5 6.45

63 6625 63 00 31.0 91.0 74.0 105.0 16.23

oz

6625

Plug-in reducer

ØG ØD2ØD1

Z

L

ØD1 ØD2 Transair® G Z L225 16.5 6666 17 25 34.0 50.0 77.0 2.54

40 25 6666 25 40 44.5 71.5 99.0 4.09

oz

6666

Plug-in reducer

L

ØGØD2

ØD1 ØD2 Transair® G L63 40 6666 40 63 67.0 112.5 30.34

oz

6666

The 63 mm to 40 mm reducer is secured by a 63 mm screw-on nut.

16.5mm supplied with LF3000 6 mm plug25-40-63mm supplied with LF3000 5/16"(8 mm) plug.

Rigid aluminum calibrated pipe • Clean air • Optimum flow rate performance• Low weight• Suitable fluids: compressed air, vacuum, nitrogen, argon

(other fluids, please consult us)• Max working pressure:

- 235 psi – please consult us for temperature range- 188 psi from -4°F to +160°F

• Vacuum: 98.7% (29.6" Hg)• Normal working temperature: -4°F to +140°F• Extruded pipe (conforms to EN 755.2. EN 755.8

and EN 573.3 standards) ASTM B241

Flexible hose• Compressor outlets (absorption of vibration)• To bypass obstacles and join different levels• Expansion loops• Max working pressure:

- 235 psi – please consult us for temperature range- 188 psi from -4°F to +140°F

• Vacuum: 98.7% (29.6" Hg)• Working temperature: -4°F to +140°F• Resistant to mineral and synthetic compressor oils• Fire resistant (conforms to ISO 8030 standard for compressed

air flexible hose and EN 12115 for vacuum flexible hose)

Rigid aluminum pipe & Flexible hose

10 ft rigid aluminum pipe

Øext. Øint. Transair® L (ft)

16.5 13 1013A17 04 00 9' 9 7/32" 1.41

25 22 1013A25 04 00 9' 7 7/8" 2.12

40 37 1013A40 04 00 9' 7 15/32" 3.11

63 59 1013A63 04 00 9' 10 1/6" 6.92

lbs

1013A

20 ft rigid aluminum pipe

Øext. Øint. Transair® L (ft)

25 22 1016A25 04 00 19'9 3/4" 4.24

40 37 1016A40 04 00 19' 8 1/4" 6.22

63 59 1016A63 04 00 19' 7 1/8" 13.84

lbs

1016A

Flexible hose for compressed air pipe systems

Min For use withODmm IDmm Transair® L bend Transair®

radius (in) pipe diameterlbs

1001E

6

Materials

38 25 1001E25 00 01 14" 4" 25 1.20

38 25 1001E25 00 03 5' 4" 25 3.28

38 25 1001E25 00 04 6'7" 4" 25 4.40

54 40 1001E40 00 02 3'3" 16" 40 4.57

54 40 1001E40 00 04 6'7" 16" 40 7.32

54 40 1001E40 00 05 9'10" 16" 40 8.82

79.5 63 1001E63 00 08 4'7" 12" 63 8.64

79 63 1001E63 00 05 9'10" 10" 63 17.77

79 63 1001E63 00 06 13'1" 10" 63 23.59

Flexible hose for vacuum systems

Restraining cable assembly (1)

Min For use withØext. Øint. Transair® L bend Transair®

radius (in) pipe diameterlbs

1001E

36 25 1001E25V00 01 14" 3" 25 1.98

36 25 1001E25V00 03 5' 3" 25 5.51

36 25 1001E25V00 04 6'7" 3" 25 6.61

52 40 1001E40V00 07 3'3" 6 1/2" 40 3.08

52 40 1001E40V00 04 6'7" 6 1/2" 40 8.81

52 40 1001E40V00 05 9'10" 6 1/2" 40 9.92

76 63 1001E63V00 05 9'10" 10" 63 19.27

76 63 1001E63V00 06 13'1" 10" 63 24.00

(1) Prevents whip-lash should Transair® flexible hose become disconnected while under pressure.Conforms to the ISO 4414 safety standard.

• Rigid aluminum pipe:- Paint Qualicoat certified

• Anti whip-lash strap- steel

• Flexible hose for compressed air systems:- Hose and coating: black SBR- Reinforcement: synthetic braiding

• Flexible hose for vacuum systems:- Hose and coating: black SBR/NBR- Reinforcement: spiral steel wire

20 ft

3 m

L

L

6698

Restraining cable assembly (1)

6698

6698 99 03

6698 99 03

pipe sizes: 16.5 mm O.D. = 1/2" ID

25 mm O.D. = 7/8" ID

40 mm O.D. = 1 1/2" ID

63 mm O.D. = 2 1/2" ID

76.2 mm O.D. = 3" ID

101.6 mm O.D. = 4" ID

Garage-Pak

• Quick assembly without cutting the pipe

• Horizontal or vertical connection

• Integral condensate retention device

• Non-flammable (conforms to UL94-HB standard)

In order to add a new outlet without shutting off the air supply, please use the “Pressurized System Connection Tool” (page 11).

Reduced overall dimension.Protection of downstream network.

• Max working pressure:- 235 psi – please consult us for temperature range- 188 psi from -4°F to +140°F

• Vacuum: 98.7% (29.6"Hg)

• Working temperature: -4°F to +140°F

Quick assembly brackets

Quick assembly bracket

ØG

ØD

E

H

L N

ØD

Z

ØD Transair® E G H L N Z25 6662 25 00 31.0 44.5 79.5 36.0 47.5 52.0 4.13

40 6662 40 00 37.0 67.0 119.5 72.0 74.5 74.0 14.18

oz

6662

Mini-bracket with coupler

ØD C Transair® Profile Bore (in)25 G1/2 6667 25 U1 ISO B 1/4"

25 G1/2 6667 25 U2 ISO B 3/8"

25 G1/2 6667 25 A1 ARO 1/4"

40 G1/2 6667 40 U1 ISO B 1/4"

40 G1/2 6667 40 U2 ISO B 3/8"

40 G1/2 6667 40 A1 ARO 1/4"

63 G1/2 6667 63 U1 ISO B 1/4"

63 G1/2 6667 63 U2 ISO B 3/8"

63 G1/2 6667 63 A1 ARO 1/4"

6667Quick assembly reducing bracket

ØD1

E

HZ

L N

ØG

ØD2

ØD1 ØD2 Transair® E G H L N Z25 16.5 6662 25 17 30.8 34.0 84.0 36.0 47.5 57.0 3.49

40 16.5 6662 40 17 39.0 34.0 99.8 37.2 67.5 73.0 4.87

40 25 6662 40 25 39.0 44.5 95.0 37.2 67.5 68.0 5.43

63 25 6662 63 25 63.5 44.5 103.0 50.0 108.5 75.0 10.58

oz

6662

Quick assembly mini-bracket with female thread

Ø D

L N

C

E

HM

ØD C Transair® E H L N M25 G1/2 6663 25 22 30.8 51.3 36.0 46.5 90.1 4.09

40 G1/2 6663 40 22 39.2 66.0 37.2 58.2 113.4 5.50

63 G1/2 6663 63 22 16.58

63 G3/4 6663 63 28 18.00

oz

6663

7

Materials6662/6663*/6667 16.5 - 25 - 40 63

• Body Polyamide with Fiberglass* Polyamide with Fiberglass• Nut Polyamide with Fiberglass Polyamide with Fiberglass

Coupler: composite material(see details p. 16-19)

*Brass insert

• Quick connection• Available in lockable version• Manual or piloted operation• Non-flammable

(conforms to UL94-HB standard) Transair® ball valves placed regularly throughout the network and at key locations, such as compressor outlets and upstream of pneumatic tools, allow ease of system isolation, adaptation and maintenance.

• Working pressure:- 235 psi – please consult us for temperature range- 188 psi from -4°F to +140°F

• Vacuum level: 98.7% (29.6"Hg)• Working temperature: -4°F to +140°F

Ball valves

Ball valve

ØG

L

N

ØD

oz

4002 Remote controlshut-off valve

ØG

L

ØD

Ø4 Ø4

ØD Transair® E G40 4230 00 40 67 261 4

lbs

4230

Pilot kit

H K

L

K1

4299Double female, vented

ØG

L

Z2Z1

ØD

N

ØD Transair® G L N Z1 Z216.5 4089 17 00 34.0 120.0 69.5 27.0 40.0 11.99

25 4088 25 14 44.5 152.0 108.5 41.0 59.0 38.44

oz

4088

Lockable valve, vented4099

8

Materials4089/4099/4230 16.5 - 25 - 40• Body Treated brass• Nut Polyamide with Fiberglass

4002/4012 40 63• Body Polyamide with Fiberglass Polyamide with Fiberglass• Nut Polyamide with Fiberglass Treated aluminum

4934/4981• Body Treated brass• Seal PTFE and nitrile

Min working pressure: 58 psi (4 bar) • Max working pressure: 188 psi (13 bar)The remote control shut-off valve is supplied with a plugged vent hole. This allows venting of the downstream network, after closing the valve.

Model 4099 17 00: supplied with Ø6 mm plug Model 4099 25 00: supplied with Ø8 mm plug

Transair® H K K1 L4299 03 01 145 106 70 82 20.11

This pilot kit comprises: pneumatic ON/OFF switch, maximum 145 psi (10 bar) operating pressure, twin 4mm OD polyurethane tube, length 10m, plastic box.

oz

ØG

L

ØD

N

ØD Transair® G L N40 4002 40 00 67.0 205.0 122.0 21.16

63 4002 63 00 67.0 278.0 185.0 85.54

oz

ØD Transair® G L N Z1 Z216.5 4099 17 00 34.0 121.0 69.0 27.0 40.0 13.82

25 4099 25 00 44.5 151.7 108.3 41.0 59.0 43.38

oz

Model 4099 17 00: supplied with Ø6 mm plug Model 4099 25 00: supplied with Ø8 mm plug

Ø40 Ø63

Garage-Pak• Working pressure:

- 235 psi – please consult us for temperature range- 188 psi from -4°F to +140°F

• Vacuum level: 98.7% (29.6"Hg)• Working temperature: -4°F to +140°F

Wall brackets

9

Materials6673/6674/6683/6684/6685/6686 16.5 - 25

• Body Treated brass• Nut Polyamide with Fiberglass

1 port wall bracket, NPT 1/2"6683

H

K N

ØG

ØD

C

66.5

19.5

ØD C Transair® G H K N16.5 G1/2 6683 17 22 34 65 70.5 82 17.11

25 G1/2 6683 25 22 44.5 81 70.5 82 16.29

oz

2 port wall bracket, NPT 1/2"6684

H

K N

ØG

ØD

C

66.5

19.5

ØD C Transair® G H K N16.5 1/2 6684 17 22 34 65 74.5 82 16.01

25 1/2 6684 25 22 44.5 81 74.5 82 13.97

oz

1 port wall bracket,with coupler

6673

ØD Transair® Profile Bore (in)16.5 6673 17 U1 ISO B 1/4"

16.5 6673 17 U2 ISO B 3/8"

16.5 6673 17 A1 ARO 1/4"

25 6673 25 U1 ISO B 1/4"

25 6673 25 U2 ISO B 3/8"

25 6673 25 A1 ARO 1/4"

2 port wall bracket,with coupler

6674

ØD Transair® Profile Bore (in)16.5 6674 17 U1 ISO B 1/4"

16.5 6674 17 U2 ISO B 3/8"

16.5 6674 17 A1 ARO 1/4"

25 6674 25 U1 ISO B 1/4"

25 6674 25 U2 ISO B 3/8"

25 6674 25 A1 ARO 1/4"

1 port threaded wall bracket, NPT 1/2"6687

N C1

C2

H

66,5 K

C1 C2 Transair® H K N1/2 1/2 6687 22 22 48 72.5 82 16.75

oz C1 C2 Transair® H K N1/2 1/2 6688 22 22 48 66.5 82 14.81

oz

2 port threaded wall bracket, NPT 1/2"6688

N

66,5

C1

C2

H

K

Coupler: composite material (see details p.16-19)

• 1 port or 2 ports• Pre-assembled composite safety coupler (6670)• Mounting on walls or machinery• Non-flammable (conforms to UL94-HB standard)

• Practical tools for the installation and extension of Garage-Pak air pipe networks • Presented in a carrying case, or available as separate parts

Tools

10

Drilling kit25 mm and 40 mm

6698

Transair® H L6698 01 01 120 80 30.33

oz

Deburring toolfor pipe

6698

Transair® L6698 04 02 140 0.70

oz

Pipe Cutter6698

Transair®

6698 03 01 28.80

oz

Drilling tool63 mm

6698

H

L

Transair® H L6698 01 02 134 155 3.81

lbs

Chamfer tool6698

Transair® H6698 04 01 64 13.05

oz

Drilling toolfor calibrated aluminum pipe

6698

ØD1 ØD2 Transair® H16 12 6698 02 02 25 71 5.18

22 12 6698 02 01 40 - 63 71 5.22

ozFor pipeTransair®

May be used with all types of drills. • Rotation speed: 650 rpm maximum.

For 16.5, 25, 40 and 63 mm.

After drilling, deburr and clean the pipe.

After drilling, deburr and clean the pipe. For 16.5, 25 and 40 mm.

Garage-Pak

We recommend however that the pipework systemis drained prior to assembly of an outlet.

Thanks to lateral dismantling of Garage-Pak pipe andthe “easily assembled” outlet brackets (see pages 6 and 7),

this operation can be done very quickly(less than 7 min. for a new outlet)

and guarantees the interior cleanliness of the circuit.

Garage-Pak

11

Set of tightening spanners for 63 mm pipe

Transair®

6698 05 03 1.675

lbs

6698

Pressurized system drilling tool

C Ø Transair® L E NG1/2 13 EA98 06 00 330.0 154.0 30.5 19.22

oz

EA98 Pressurized system bracket

ØD Transair®

25 EA98 06 01

40 EA98 06 02

63 EA98 06 03

EA98

Tool case

Transair® H L6698 00 03 315 290 13.0

lbs

6698

Pressurized system outlets

This set includes 2 tightening spanners. This tool case simplifies the use and transportation of tools.It contains all the tools necessary for completing a Garage-Pak installation:

- Drilling fixtures 6698 01 01 and 6698 01 02- Drilling tools 6698 02 01 and 6698 02 02- Cutter for pipe 6698 03 01- Chamfer tool 6698 04 01- Deburring tool 6698 04 02- Set of tightening spanners(2)6698 05 03- Marking tool 6698 04 03

• Ideal for fast assembly of new pressurized outlets,without venting the compressed air system.

• The drilling tool can be used with moststandard drills.

Marking toolfor aluminum pipe

6698L1

L2

H

Transair® H L1 L26698 04 03 88 73 33 0.38

oz

Materials Pressurized system drilling tool:• Body - aluminum• Drill - steel• Adapter and Cap - brass• Silencer - plastic

Ball valve with bracket(1/2” NPT thread)

The marking tool enables connection guidelines to be marked on cut lengths of Garage-Pak pipe. These marksindicate the insertion limits of the pipe into the fitting in order to ensure good airtight connection and securityof grip.

• Can be adapted to all pipework configurations • For suspension of pipes, from walls, partitions, beams, cable trays,

vertically and horizontally• Perfectly suited for use with Garage-Pak systems

Fixture accessories

12

U-channel, 2 meters

L

L1

H

Transair® H L (m) L16699 01 01 25 2 25 3.30

lbs

6699Pipe mounting clip for rigid pipe

C

L

ØD

K

HH1

ØD C Transair® H1 H K L16.5 M6X1 6697 17 01 46 61 30 32.5 0.95

25 M6X1 6697 25 01 46 65.5 30 38.5 1.06

40 M6X1 6697 40 01 46 74.5 30 50 1.27

63 M10X1.5 6697 63 01 90 127.5 30 73.5 2.82

6697

Threaded rod adapter

F

H

C1

C2

E

Transair® E F H0169 00 05 00 16 13 30 1.06

0169

U-channel fixing bracket

L

H

Transair® H L6699 01 02 106 40 6.00

oz

6699

Garage-Pak pipe mounting clips are designed to bear a maximum weight of 44lbs. However, to ensure good stability of the network, we recommend the use of at least 2 clips per pipe i.e:

- maximum 5 ft space between clips for 10 ft lengths of pipe.- maximum 10 ft space between clips for 20 ft lengths of pipe.

Use only this clip for mounting Garage-Pak pipe, all other type of pipe clips are to be avoided.Fix the clip to a rigid support (U-channel, cable tray) to allow for expansion while retaining the pipe.

The use of this adapter facilitates the suspension of Garage-Pak under M8 or M10 threaded rod.

Materials - Fixing clips: polymer H.R. - Spacer: polymer H.R.- Clip adapter: brass- U-channel: galvanized steel

- Set of fixing accessories: galvanized steel- Clip fixing set 3 mm: galvanized steel

The set comprises:- 1 bracket- 1 screw- 1 nut- 1 end cap

oz

Spacer

H H1

ØD

L K

ØD Transair® H H1 K L11 6697 00 03 49.5 44 34 33 .705

6697

This spacer, in association with the Garage-Pak clip, allows consistent alignment of pipes.

oz

90mm

46mm

44mm

Ø63 Ø40

90 mm46 mm44 mm

oz

Garage-Pak

• Suitable fluids: compressed air, argon, nitrogen(please consult us for other fluids)

• Working pressure: 235 psi maximum• Working temperature: from -4°F to +140°F

Male body, NPTCP05

Female body, NPTCP15

Body with hosetailCP21

Female straight plug, NPTCA83

Barbed connector plugCA94

Male straight plug, NPTCA84

• For quick and repetitive connection and disconnection • 100% safety - ISO 4414 and EN983 compliant• Very high flow, extremely small pressure loss• Lightweight and robust• Improved hand grip• Fast vent time

Materials • Body: reinforced polymer• Sleeve: reinforced polymer• Spring: stainless steel• Seal: nitrile• Thread: nickel plated brass

• Ball bearings: stainless steel• Probe: nickel plated brass• Probe adapter: nickel plated brass

with polymer sleeve

C Transair®

G1/4 CP05 U1N02

G3/8 CP05 U1N03

G1/2 CP05 U1N04

C Transair®

G1/4 CP15 U1N02

G3/8 CP15 U1N03

G1/2 CP15 U1N04

C Transair®

G1/4 CA84 U1N02

G3/8 CA84 U1N03

G1/2 CA84 U1N04

ØD Transair®

6 CP21 U1 06

8 CP21 U1 08

10 CP21 U1 10

C Transair®

G1/4 CA83 U1N02

G3/8 CA83 U1N03

G1/2 CA83 U1N04

ØD Transair®

6 CA94 U1 06

8 CA94 U1 08

10 CA94 U1 10

Flow curve - pressure lossPressure loss in bar. To convert Nm3/h to cfm use a coefficient of 0.588.

Flow in Nm3/h

Safety ISO 6150 BAFNOR NF 49-053US.MIL.C4109CEJN 310RECTUS 23-24

Flow: 44 cfm

Complete with sealing ringComplete with sealing ring

00

0.2

0.4

0.6

0.8

30 60 90

Composite automatic safety couplers – ISO B profile - 1/4"

13

Garage-Pak composite automatic safety couplers complywith worldwide ISO 4414 and European EN983

safety standards. Disconnection is by a double twist of the sleeve – a safety feature that breaks deliberately with

common practice in order to avoid accidental disconnection.

Composite automatic safety couplers – ISO B profile - 3/8"

Male body, NPTCP05

Female body, NPTCP15

Body with hosetailCP21

Female straight plug, NPTCA83

Barbed connector plugCA94

Male straight plug, NPTCA84

Materials • Body: reinforced polymer• Sleeve: reinforced polymer• Spring: stainless steel• Seal: nitrile

• Ball bearings: stainless steel• Probe: nickel plated brass, nickel plated steel

C Transair®

G1/4 CP05 U2N02

G3/8 CP05 U2N03

G1/2 CP05 U2N04

C Transair®

G1/4 CP15 U2N02

G3/8 CP15 U2N03

G1/2 CP15 U2N04

C Transair®

G1/4 CA83 U2N02

G3/8 CA83 U2N03

ØD Transair®

8 CA94 U2 08

10 CA94 U2 10

13 CA94 U2 13

ØD Transair®

8 CP21 U2 08

10 CP21 U2 10

13 CP21 U2 13

C Transair®

G1/4 CA84 U2N02

G3/8 CA84 U2N03

Flow curve – pressure lossPressure loss in bar. To convert Nm3/h to cfm use a cœfficient of 0.588.

Flowin Nm3/h

Safety ISO 6150 BAFNOR NF 49-053US.MIL.C4109CEJN 430RECTUS 30

1st rotation in direction of the arrow: circuit rapidly

flushed out, probe side.

2nd rotation in direction of the arrow: safe disconnection of body and probe.

21

Flow: 85 cfm

Complete with sealing ring

Complete with sealing ring

00

0.2

0.4

0.6

0.8

30 60 90 120 150

14

Garage-Pak

15

Composite automatic safety couplers – ARO profile - 1/4"

Materials • Body: reinforced polymer• Sleeve: reinforced polymer• Spring: stainless steel• Seal: nitrile

• Ball bearings: stainless steel• Probe: nickel plated brass, nickel plated steel

Male body, NPTCP05

Female body, NPTCP15

Body with hosetailCP21

Female straight plug, NPTCA83

Barbed connector plugCA94

Male straight plug, NPTCA84

Flow curve – pressure lossPressure loss in bar. To convert Nm3/h to cfm use a coefficient of 0.588.

C Transair®

G1/4 CP05 A1N02

G3/8 CP05 A1N03

G1/2 CP05 A1N04

C Transair®

G1/4 CA84 A1N02

G3/8 CA84 A1N03

G1/2 CA84 A1N04

C Transair®

G1/4 CA83 A1N02

G3/8 CA83 A1N03

G1/2 CA83 A1N04

ØD Transair®

6 CA94 A1 06

8 CA94 A1 08

10 CA94 A1 10

C Transair®

G1/4 CP15 A1N02

G3/8 CP15 A1N03

G1/2 CP15 A1N04

ØD Transair®

6 CP21 A1 06

8 CP21 A1 08

10 CP21 A1 10

1st rotation in direction of the arrow: circuit rapidlyflushed out, probe side.

2nd rotation in direction ofthe arrow: safe disconnectionof body and probe.

Garage-Pak composite automatic safety couplers complywith worldwide ISO 4414 and European EN983

safety standards. Disconnection is by a double twist of the sleeve – a safety feature that breaks deliberately with

common practice in order to avoid accidental disconnection.

Safety ARO 210CEJN 300ORION 44510PARKER 50RECTUS 14-22

21

Flowin Nm3/h

Flow: 44 cfm

Complete with sealing ringComplete with sealing ring

00

0.2

0.4

0.6

0.8

30 60 90

16

Blowgun

L

C

DN

H

EA58

Flow 87 psi: 15cfm (430 Nl/min.)

C Transair® H LG1/4 3.5 EA58 00 14 125.5 223.0 2.65

oz

Blowgun• Dusting, cooling and drying components• Cleaning swarf• Cleaning machinery• Working pressure: 174 psi maximum• Working temperature: -4°F to +122°F

Blowgun

Materials

• Blowgun: - body: reinforced composite; nozzle: aluminum

DN

Garage-Pak

Garage-Pak FRLs are ideal for general purpose use and can be fitted downstream of the compressed air installation and attake-off points on workstations and machines:• Air quality at FRL inlet: dry, damp, oiled • Garage-Pak FRL products are guaranteed silicone free• Chemical resistance to compressor oils

FRLs, Automatic drain and accessories

17

Filter regulator6730

All products presented above can be easily connected to Garage-Pak, compressed air pipework systems using the following NPT threaded fittings:• 6605 17 14 for G1/4 port (page 4)• 6605 17 22 or 6605 25 22 for G1/2 port (page 4)

6730 00 14: model for G1/46730 00 22: model for G1/2Maxi inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: 32°F to +122°F (to 145 psi)Semi-automatic condensate drainageFiltration: 30 µmRecommended flow: G1/4 = 33m3/h - G1/2 = 114m3/hBowl capacity: G1/4 = 22cm3- G1/2 = 50cm3

To be used with gauge: 6798 00 05 for G1/46798 00 06 for G1/2

Pressure regulator67316731 00 14: model for G1/4

6731 00 22: model for G1/2Maxi inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: 32°F to +140°FRecommended flow: G1/4 = 33m3/h - G1/2 = 114m3/hTo be used with gauge: 6798 00 05 for G1/4

6798 00 06 for G1/2

Filter separator67326732 00 14: model for G1/4

6732 00 22: model for G1/2Maxi inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: 32°F to + 122°F (to 145 psi)Semi-automatic condensate drainageFiltration: 30 µmRecommended flow: G1/4 = 33m3/h - G1/2 = 114m3/hBowl capacity: G1/4 = 22cm3 - G1/2 = 50cm3

Lubricator67336733 00 14: with G1/4 port

6733 00 22: with G1/2 portOil mist lubricatorMax inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: -4°F to +122°F (to 145 psi)Oil capacity: G1/4 = 45cm3- G1/2 = 112cm3

With flow compensation.

3/2 in-line vent valve67346734 00 14: with G1/4 port6734 00 22: with G1/2 port3/2 lockable shut-off valveMin pressure: 0 psi - Max pressure: 232 psiTemperature: 32°F to +140°FDownstream circuit drains when valve is closedRecommended flow: G1/4 = 33m3/h - G1/2 = 114m3/hSupplied without padlock.

Front and rear port connector block67356735 00 14: with G1/4 port6735 00 22: with G1/2 port

To be used when assembling 2 elements front andrear entry: G1/8 and G1/4.

Automatic drain 67366736 00 22: model for G1/2

Condensate drain: - automatic- float type

Filter regulator lubricator set67376737 00 14: model for G1/46737 00 22: model for G1/2Maxi inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: 32°F to +122°F (to 145 psi)Semi-automatic condensate drainageFiltration: 30 µmRecommended flow: G1/4 = 33m3/h - G1/2 = 114m3/hMax bowl capacity: G1/4 = 22cm3 - G1/2 = 50cm3

With flow compensation.

Filter regulator and lubricator with gauge67386738 00 14: model for G1/46738 00 22: model for G1/2Maxi inlet pressure: 232 psi - Max outlet pressure: 116 psiTemperature: 32°F to +122°F (to 145 psi)Semi-automatic condensate drainageFiltration: 30 µmRecommended flow: G1/4 = 33m3/h - G1/2 = 114m3/hMax bowl capacity: G1/4 = 22cm3 - G1/2 = 50cm3

With flow compensation.

Gauge67986798 00 05: G1/8 thread for FRL 1/4 - 40 mm gauge diameter6798 00 06: G1/4 thread for FRL 1/2 - 50 mm gauge diameterTo be mounted on the front face of the filter regulatoror the regulator.

Protection bowl67986798 00 07: model with G1/4 thread, with snap mounting6798 00 08: model with G1/2 thread, with snap mountingTo be used with filter regulator, filter, lubricator.

Mounting brackets and assembly kit67986798 00 01: with G1/4 port6798 00 02: with G1/2 portFor wall or machine fixing.Screws supplied.Center-to-center: 46 mm (compatible with Garage-Pak fixing clips).Assembly kit, to assemble several elements.6798 00 03: with G1/4 port6798 00 04: with G1/2 port

To convert Nm3/h to cfm use a cœfficient of 0.588.

Garage-PakIndex

18

6605 17 22 4

6605 25 22 4

6605 25 28 4

6605 25 35 4

6605 40 35 4

6605 40 43 4

6605 40 50 4

6605 63 41 4

6605 63 44 4

6606 17 00 4

6606 25 00 4

6606 40 00 4

6606 63 00 4

6607 25 00 5

6607 40 00 5

6612 25 00 4

6612 40 00 4

6621 17 22 5

6621 25 22 5

6621 25 28 5

6621 40 43 5

6621 40 50 5

6625 17 00 5

6625 25 00 5

6625 40 00 5

6625 63 00 5

6662 25 00 7

6662 25 17 7

6662 40 00 7

6662 40 17 7

6662 40 25 7

6662 63 25 7

6663 25 22 7

6663 40 22 7

6663 63 22 7

6666 63 28 7

6666 17 25 5

6666 25 40 5

6666 40 63 5

6667 25 A1 7

6667 25 U1 7

6667 25 U2 7

6667 40 A1 7

0169 00 05 00 12

1001E25 00 01 6

1001E25 00 03 6

1001E25 00 04 6

1001E25V00 01 6

1001E25V00 03 6

1001E25V00 04 6

1001E40 00 02 6

1001E40 00 04 6

11001E40 00 05 6

1001E40V00 04 6

1001E40V00 05 6

1001E40V00 07 6

1001E63 00 05 6

1001E63 00 06 6

1001E63 00 08 6

1001E63V00 05 6

1001E63V00 06 6

1013A17 04 00 6

1013A25 04 00 6

1013A40 04 00 6

1013A63 04 6

1016A25 04 00 6

1016A40 04 00 6

1016A63 04 6

4002 40 00 8

4002 63 00 8

4088 25 14 8

4089 17 00 8

4099 17 00 8

4099 25 00 8

4230 00 40 8

4299 03 01 8

6602 17 00 4

6602 25 00 4

6602 40 00 4

6602 63 00 4

6604 17 00 4

6604 25 00 4

6604 40 00 4

6604 63 00 4

6604 63 40 5

6605 17 14 4

CA84 U2N03 14

CA94 A1 06 15

CA94 A1 08 15

CA94 A1 10 15

CA94 U1 06 13

CA94 U1 08 13

CA94 A1 10 13

CA94 U2 08 14

CA94 U2 10 14

CA94 U2 13 14

CP05 A1 02 15

CP05 A1 03 15

CP05 A1 04 15

CP05 U1N02 13

CP05 U1N03 13

CP05 U1N04 13

CP05 U2N02 14

CP05 U2N03 14

CP05 U2N04 14

CP15 A1 02 15

CP15 A1 03 15

CP15 A1 04 15

CP15 U1N02 13

CP15 U1N03 13

CP15 U1N04 13

CP15 U2N02 14

CP15 U2N03 14

CP15 U2N04 14

CP21 A1 06 15

CP21 A1 08 15

CP21 A1 10 15

CP21 U1 06 13

CP21 U1 08 13

CP21 U1 10 13

CP21 U2 08 14

CP21 U2 10 14

CP21 U2 13 14

EA58 00 14 16

EA98 06 00 11

EA98 06 01 11

EA98 06 02 11

EA98 06 03 11

6667 40 U1 7

6667 40 U2 7

6667 63 A1 7

6667 63 U1 7

6667 63 U2 7

6673 17 A1 9

6673 17 U1 9

6673 17 U2 9

6673 25 A1 9

6673 25 U1 9

6673 25 U2 9

6674 17 A1 9

6674 17 U1 9

6674 17 U2 9

6674 25 A1 9

6674 25 U1 9

6674 25 U2 9

6676 25 00 4

6676 40 00 4

6676 63 00 4

6683 17 22 9

6683 25 22 9

6684 17 22 9

6684 25 22 9

6687 22 22 9

6688 22 22 9

6697 00 03 12

6697 17 01 12

6697 25 01 12

6697 40 01 12

6697 63 01 12

6698 00 03 11

6698 01 01 10

6698 01 02 10

6698 02 01 10

6698 02 02 10

6698 03 01 10

6698 04 01 28

6698 04 02 10

6698 04 03 11

6698 05 03 11

6698 11 11 16

6698 11 12 16

6698 99 03 6

6699 01 01 12

6699 01 02 12

6700 00 13 17

6700 00 21 17

6701 00 13 17

6701 00 21 17

6702 00 13 17

6702 00 21 17

6703 00 13 17

6703 00 21 17

6704 00 13 17

6704 00 21 17

6705 00 13 17

6705 00 21 17

6706 00 21 17

6706 00 13 17

6707 00 21 17

6708 00 13 17

6708 00 21 17

6798 00 01 17

6798 00 02 17

6798 00 03 17

6798 00 04 17

6798 00 05 17

6798 00 06 17

6798 00 07 17

6798 00 08 17

CA83 A1 02 15

CA83 A1 03 15

CA83 A1 04 15

CA83 U1N02 13

CA83 U1N03 13

CA83 U1N04 13

CA83 U2N02 14

CA83 U2N03 14

CA84 A1 02 15

CA84 A1 03 15

CA84 A1 04 15

CA84 U1N02 13

CA84 U1N03 13

CA84 U1N04 13

CA84 U2N02 14

Part number Page Part number Page Part number Page Part number Page Part number Page

N o t e s

WARNING: Installation and assembly must be completed as set forth in the Installation Guide and Assembly Guide. Failure to comply precisely with these instructions can cause unsafe operating conditions and serious personal injury or death. Compressedair systems involve inherent hazards, and if pieces are not properly assembled and installed, end pieces could blow off, creating the potential for serious injury to those in the area, and pipe and joint breakage and air leaks may occur, exposing those in thearea to the risk of injury from air under pressure or from falling or moving pipes or other parts of the system. Take particular care with installation of end caps and wall brackets. Additional requirements include:

• Only compatible Garage-Pak products may be used together and included in any installation. Fittings are very sensitive to sizes, so proper parts must always be used.

• The Garage-Pak installation must not be embedded in a solid mass, such as concrete, injected foam, or similar materials.

• The Garage-Pak installation must not be in water or any other liquid.

• The Garage-Pak installation is to be used only for compressed air or inert gases, and not for any other gas or for any liquid.

• The Garage-Pak installation may be attached to a ceiling only if the clips are fixed to a solid base or to 3/8" threaded rod hangers.The base must allow a proper alignment of fixing clips in order to ensure their stability and efficiency when normal expansion andcontraction occur.

• The Garage-Pak installation must be protected against mechanical and other shocks and impacts, and particular care must betaken to protect tubes and other components in areas where fork lift trucks, other moving vehicles, moving equipment, or otheractivity creates a risk of contact with the Garage-Pak system.

• Garage-Pak tubes and connectors must not be subjected to greater numbers of rotations than are specified in the installation and assembly guides.

• The Garage-Pak system may not be used as a support or to convey conduit or other electrical systems.

• The effects of expansion and contraction in the particular application must be considered, to avoid having components becomedeformed, leading to failure.

• All of the technical characteristics of the Garage-Pak system must be taken into account in the installation and assembly for theparticular application. The technical characteristics are found in the Garage-Pak technical catalog and the Installation Guide.

• All Garage-Pak assembly and installation must be done by properly trained personnel familiar with the products, their characteristics, their limitations, the hazards involved, OSHA and other applicable safety requirements, and the assembly andinstallation requirements.

• The Garage-Pak products and installation must be serviced only by trained and certified personnel as described above.

• The Garage-Pak installation must meet all safety standards in OSHA or any other applicable regulations, requirements or standards.

• Air pressure in the system must not exceed 230 PSI. Higher pressures increase the risks of breakage and leaks.

• The Garage-Pak system may not be used in an environment with temperatures in excess of 140° F. Such temperatures may causeleakage in seals.

• The air pressure must be turned off during assembly, installation, repair, service or replacement.

• The Garage-Pak system should be pressure tested after installation is complete, but before the system is put into operation.Likewise, the system should be pressure tested after any servicing or repairs, and after any abnormal circumstances, such asextreme temperatures or physical shock.

• All procedures and descriptions in the Installation Guide must be followed.

Failure to follow these requirements will increase the risk of serious injury, as well as increase the likelihood of operating failures.

LIMITED WARRANTY

Garage-Pak warrants its products to be free of defects in material and workmanship for a period of two (2) years from the dateof purchase of the products. Garage-Pak makes no other warranties, express or implied. This limitation explicitly excludes anyimplied warranty of merchantability or fitness for a particular purpose. The sole remedy for breach of this warranty of material andworkmanship or for negligence in manufacture or design is limited to replacement or repair, at the sole option of Garage-Pak, of anydefective parts which are returned to Garage-Pak (prepaid) within two (2) years of original purchase. In no event shall Garage-Pakbe liable for indirect, special, incidental or consequential damages of any kind. No allowance will be made for repairs made by the purchaser.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ANY AND ALL OTHER WARRANTIES AND REPRESENTATIONS,EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO, THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ANDTHE WARRANTY OF MERCHANTABILITY. LEGRIS-TRANSAIR MAKES NO WARRANTY THAT THE GOODS SOLD HEREUNDERARE DELIVERED FREE OF THE RIGHTFUL CLAIM OF ANY THIRD PARTY BY WAY OF INFRINGEMENT OR OTHERWISE.THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF. THE EXCLUSIVE REME-DY FOR DEFECTIVE PRODUCTS SHALL BE ONLY AS STATED HEREIN.

Garage-Pak does not warrant the design, assembly or installation of the system, but only the components as stated herein.Garage-Pak is not responsible for improper design, assembly or installation, or for any modifications of the Garage-Pak products.The warranty herein is void upon (a) failure to follow any of the assembly or installation guidelines, (b) installation, repair or relocation of thecomponents by a person other than a trained and qualified installer; (c) alteration, misuse or abuse of, or damage to, any of the Garage-Pakproducts, (d) operation beyond the design range, excessive pressure or stress, or mishandling in any way, (e) use other than forthe intended purpose or in a manner other than as specified by Garage-Pak, or (f) improper assembly, installation, service or mainte-nance. This Limited Warranty, and Garage-Pak's responsibility, may be further limited, but may not be expanded, by Garage-Pak'sterms and conditions of sale, as set forth on the reverse side of the Garage-Pak invoice.

6501 North Crain HighwayBowie, Maryland 20715www.garage-pak.comIn MD: (301) 352-5252

Toll Free: (877) 236-6076