Transceiver Quick Reference Guide - PlusOptic€¦ · PlusOptic offer the widest range of transceivers available on the market today, with a broad range of data rates, distances and

DEVICE TYPE DATA RATE REACH CONNECTOR FIBRE TYPE DDMI COMMON NAME BASE PART NUMBER

Copper SFP 1G 100m RJ-45 Copper Cat 5+ NO 1000Base-T SFP-T-PLU

Copper SFP+ 10G 30m RJ-45 Copper Cat 6A/7 NO 10Gbase-T SFP-10G-T-PLU

SFP 1G 550m LC MMF YES SX SFP-1G-SX-PLU

SFP 1G 10km LC SMF YES LX SFP-1G-LX-PLU

SFP 1G 40km LC SMF YES EX SFP-1G-EX-PLU

SFP 1G 80km LC SMF YES ZX SFP-1G-ZX-PLU

SFP+ 10G 300m LC MMF YES SR SFP-10G-SR-PLU

SFP+ 10G 220m LC MMF YES LRM SFP-10G-LRM-PLU

SFP+ 10G 10km LC SMF YES LR SFP-10G-LR-PLU

SFP+ 10G 40km LC SMF YES ER SFP-10G-ER-PLU

SFP+ 10G 80m LC SMF YES ZR SFP-10G-ZR-PLU

SFP28 25G 100m LC MMF YES SFP28 SR4 SFP28-SR4-PLU

SFP28 25G 10km LC SMF YES SFP28 LR4 SFP28-LR4-PLU

QSFP+ 40G 150m MTP/MPO MMF YES SR4 QSFP-40G-SR4-PLU

QSFP+ 40G 10km LC SMF YES LR4 QSFP-40G-LR4-PLU

QSFP+ 40G 30km LC SMF YES ER4 QSFP-40G-ER4-PLU

QSFP28 100G 100m MTP/MPO MMF YES SR4 QSFP28-SR4-PLU

QSFP28 100G 10km LC SMF YES LR4 QSFP28-LR4-PLU

QSFP28 100G 40km LC SMF YES ER4 QSFP28-ER4-PLU

*To order Vendor Specific product replace the PLU code in the Base Part Number with the first 3 letters of the Vendor ie SFP-1G-SX-CIS (Cisco)**PlusOptic also have a wide range of solutions for X2, Xenpak, XFP, CFP and Fibre Channel (FC), please contact us or visit our web site for details.

BIDI DATA RATE

REACH 10km

REACH 20km

REACH 40km

REACH 60km

REACH 80km

REACH 120km CONNECTOR

SFP 1.25GB a a a a LC

SFP+ 10.3GB a a a a LC

XFP 10.3GB a a a LC

X2 10.3GB a SC

ALSO AVAILABLE: 155MB BIDI SFP, BIDI GBIC For more details please refer to our website or contact us.

CWDM REACH 10km

REACH 40km

REACH 80km

REACH 120km

REACH 160km

WAVELENGTHS CONNECTOR

SFP a a a a 1270-1610 LC

SFP+ a a a 1270-1610 LC

XFP a a a 1270-1610 LC

X2 a a 1270-1610 SC

XENPAK a a 1270-1610 SC

ALSO AVAILABLE: CWDM SFP OC-3c / STM-1, CWDM SFP OC-12 / STM-4, CWDM SFP OC-48 / STM-16 / 2.5G SONET, CWDM XFP SDH SONET, CWDM FC & CWDM FC SFP+

DWDM REACH 10km

REACH 40km

REACH 80km

REACH 120km

REACH 160km CHANNELS CONNECTOR

SFP a a a 17 - 61 LC

SFP+ a a 17 - 61 LC

XFP a a 17 - 61 LC

X2 a a 17 - 61 SC

Transceiver Quick Reference Guide

ChoicePlusOptic offer the widest range of transceivers available on the market today, with a broad range of data rates, distances and wavelengths.

CompatibilityPlusOptic Transceivers offer seamless compatibility with over 60 vendors including HP, Cisco, Juniper, Netgear,Brocade and Extreme.

Multiplexing SpecialistsPlusOptic are multiplexing specialists and we offer proven DWDM / CWDM fibre optic transceivers that provide rock solid reliability as well as great value.

WarrantyAll PlusOptic Transceivers come with a 3 year warranty and a money back guarantee regarding any performance or compatibility issues.

Industrial Temperature Rated Transceivers Available

For More Information

Email: [email protected]: +61 2 8324 1413

or visit our website at:

www.PlusOptic.com

SFP + PASSIVE DIRECT ATTACH CABLES

Part Number DATA RATE REACH AWG

DACSFP+-0.5M-PLU* 10Gb 0.5m 30

DACSFP+-1M-PLU* 10Gb 1m 30




QSFP + PASSIVE DIRECT ATTACH CABLES


DACQSFP+-0.5M-PLU* 40Gb 0.5m 30

DACQSFP+-1M-PLU* 40Gb 1m 30




SFP28 PASSIVE DIRECT ATTACH CABLES


DACSFP28-1M-PLU* 25Gb 1m 30



QSFP28 PASSIVE DIRECT ATTACH CABLES


DACQSFP28-1M-PLU* 100Gb 1m 30



ACTIVE OPTICAL CABLES

Part Number DATA RATE REACH

AOCSFP+-?M-PLU* 10Gb Any Length

AOCQSFP+-?M-PLU* 40Gb Any Length

AOCSFP28-?M-PLU* 100Gb Any Length

AOCQ28-?M-PLU* 100Gb Any Length

BREAKOUT CABLES

Part Number CABLE TYPE DATA RATE

BREAKSOUT TO:

DACQSFP+-4-?M-PLU* QSFP TO 4 x SFP+ Direct Attach Cable

40G 4 x 10G

AOCQSFP+-4-?M-PLU* QSFP TO 4 x SFP+ Active Optical Cable

40G 4 x 10G

DACQSFP28-4-?M-PLU* QSFP28 TO 4 x SFP28 Direct Attach Cable

100G 4 x 25G

AOCQSFP28-4-?M-PLU* QSFP28 TO 4 x SFP28 Active Optical Cable

100G 4 x 25G

Direct Attach Cables (DAC) & Active Optical Cable (AOC)Quick Reference Guide

PlusOptic DAC cables are ideal solutions for short range high speed connectivity in the data closet or data centre as they provide low latency and low power performance when compared to traditional cabling.

Our range of DAC cables includes:• Passive copper DAC’s• Active optical cables (AOC)

Custom Lengths As well as our standard lengths we also offer custom lengths on any of our cable range, contact PlusOptic with your requirements.

Data Centre Cabling We offer a full range of DAC’s, AOC’s including Passive & AOC breakout cables for: SFP+, QSFP+ & QSFP28. We also provide extensive Transceiver and Fibre Cable data centre solutions including MPO Cables and MPO Breakout Cables.

Cross Vendor Connectivity We offer dual vendor DAC cables. For instance if you want to connect HP hardware to Cisco via a Direct Attach Cable, we will custom make your DAC to have HP coding on one end and Cisco on the other. We offer compatibility with over 60 vendors, contact us for more details on our multi vendor DAC solutions.

*Ordering InformationWhen ordering for compatibility with specific vendors such as HP, Cisco, Juniper etc please replace ‘PLU’ with the relevant vendor code such as ‘CIS’ for Cisco. For instance the product code for a 1m Cisco passive SFP+ DAC would be: DACSFP+-1M-CIS. We offer compatibility with over 60 vendors, please refer to the accompanying list for all product codes or contact PlusOptic.

WarrantyAll PlusOptic Direct Attach Cables come with a 3 year warranty and a money back guarantee regarding any performance issues.

More Information If you require any more informationplease contact us:



www.PlusOptic.com

The PlusOptic C/DWDM range of Multiplexers are growing in popularity because they allow organizations to expand the capacity of the net-work without laying more fiber. By using C/DWDM multiplexers, customers can add extra Bandwidth and capacity on Dark fibre links simply by upgrading the multiplexers and demultiplexers at each end.

CWDM vs DWDM Both technologies are typically passive and don’t require power though active DWDM’s are available and increase the number of channels. CWDM was the original multiplexing technology and was introduced as a low-cost approach to increasing bandwidth utilisation of the fibre. Using several wavelengths of light and by increasing the channel spacing between wavelengths on the fibre, CWDM allows for a simple and affordable method of carrying up to 16 channels on a single fibre. Products are available with 4, 8 or 16 channels.

DWDM allows for the transporting of extremely large amounts of data traffic over metro or long distances. DWDM typically has the capability to transport up to 40 channels (wavelengths) by having tighter channel spacing and control. The technology is slightly more expensive than CWDM but offers significantly greater bandwidth on the single core fibre. The PlusOptic DWDM range has a 20 Channel and 40 Channel model available

Specialised Transceivers are required to be used in conjunction with Multiplexers. When you purchase a DWDM or CWDM Multiplexer they work as a pair so you will always require two.

There is an option to select a Single Core or a Dual Core Multiplexer. A Dual Core Mux uses two Fibre Strands one for the TX and the other for RX. A Single Core Multiplexer Uses One Fibre Strand to Transmit and Receive.

OADM Modules, DWDM Amplifiers and specialised Multiplexers are available upon request.

CWDM ‘Infinimux’ Multiplexer RangeSKU CHANNELS W/LENGTHS PASS PORT MONITORING PORT CORE

MD-4CH-1RU-CWDM-1310-DX 4CH 1550~1610nm 1310nm YES DUAL CORE

MD-8CH-1RU-CWDM-1310-DX 8CH 1470~1610nm 1310nm YES DUAL CORE

MD-16CH-1RU-CWDM 16CH 1270~1610nm NO YES DUAL CORE

MD-8CH-1RU-CWDM-SX-A/B 8CH 1470~1610nm NO YES SINGLE CORE

MD-8CH-1RU-CWDM-SX-A 8CH 1470~1610nm NO YES SINGLE CORE

MD-8CH-1RU-CWDM-SX-B 8CH 1470~1610nm NO YES SINGLE CORE

Custom CWDM Multiplexers Available, Contact PlusOptic With Your Requirements.

DWDM ‘Apeiron’ Multiplexer RangeSKU # OF CHANNELS W/LENGTHS MONITORING PORT CORE GHz SPACING

MD-4CH-1RU-DWDM-1310-DX 4CH CH20-CH23 YES DUAL CORE 100GHz

MD-8CH-1RU-DWDM-1310-DX 8CH CH20~CH27 YES DUAL CORE 100GHz

MD-16CH-1RU-DWDM-1310-DX 16CH CH20~CH35 YES DUAL CORE 100GHz

MD-20CH-1RU-DWDM-100GHz-DXFX 20CH CH20~CH39 YES DUAL CORE 100GHz

MD-40CH-1RU-DWDM-100GHz-DXFX 40CH CH20~CH59 YES DUAL CORE 100GHz

MD-40CH-1RU-DWDM-100GHz-SXFXA 40CH CH20~CH58 YES SINGLE CORE 100GHz

MD-40CH-1RU-DWDM-100GHz-SXFXB 40CH CH21~CH59 YES SINGLE CORE 100GHz

Custom DWDM Multiplexers Available, Contact PlusOptic With Your Requirements.

WarrantyAll PlusOptic multiplexers come with a 3 year warranty.

More Information If you require any more information please contact us:



www.PlusOptic.com

CWDM / DWDM MULTIPLEXERSQuick Reference Guide

OM1 MULTIMODE SIMPLEX & DUPLEXCONNECTION TYPES (STOCKED) LC - LC / LC - SC / LC - ST / SC - SC / SC -ST / ST - ST / FC CONNECTOR CONFIGS AVAILABLE TO ORDER

LENGTHS (STOCKED) 0.5M, 1M, 2M, 3M, 5M, 10M, 15M, 20M, 25M, 30, 40M, 50M, 60M, 70M, 80M, 90M, 100M

CUSTOM LENGTHS CUSTOM CABLES OF ANY LENGTH ARE AVAILABLE (USUAL LEAD TIME 5 - 8 WORKING DAYS)

ARMOUR CABLE STEEL BRAIDED ARMOUR CABLE AVAILABLE IN ALL LENGTHS & CONNECTOR CONFIGS (LEAD TIME 5 - 8 WORKING DAYS)

Example OM1 Part Numbers, Duplex: LC-LC-OM1-1M-DX Simplex: LC-LC-OS1-1M-SX Change the connector types (LC-LC), the length (1M) and choose either DX (Duplex) or SX (Simplex) for your correct part number.

OM3 MULTIMODE SIMPLEX & DUPLEXCONNECTION TYPES (STOCKED) LC - LC / LC - SC / LC - ST / SC - SC / SC -ST / ST - ST /


CUSTOM LENGTHS CUSTOM CABLES OF ANY LENGTH ARE AVAILABLE (USUAL LEAD TIME 5 - 8 WORK DAYS)


Example OM3 Part Numbers, Duplex: LC-LC-OM3-1M-DX Simplex: LC-LC-Om3-1M-SX Change the connector types (LC-LC), the length (1M) and choose either DX (Duplex) or SX (Simplex) for your correct part number.

OM4 MULTIMODE SIMPLEX & DUPLEXCONNECTION TYPES (STOCKED) LC - LC / LC - SC / LC - ST / SC - SC / SC -ST / ST - ST / MPO - MPO / MPO - 4 x LC




Example OM4 Part Numbers, Duplex: LC-LC-OM4-1M-DX Simplex: LC-LC-OM4-1M-SX Change the connector types (LC-LC), the length (1M) and choose either DX (Duplex) or SX (Simplex) for your correct part number.

OS1 SINGLEMODE SIMPLEX & DUPLEX (MPO CABLES ARE OS2)CONNECTION TYPES (STOCKED) LC - LC / LC - SC / LC - ST / SC - SC / SC -ST / ST - ST / MPO - MPO (OS2) / MPO - 4 x LC (OS2)




Example OS1 Part Numbers, Duplex: LC-LC-OS1-1M-DX Simplex: LC-LC-OS1-1M-SX Change the connector types (LC-LC), the length (1M) and choose either DX (Duplex) or SX (Simplex) for your correct part number.

IP67 RUGGED / EXTERNAL / WATER & DUST PROOF CABLESCONNECTION TYPES LC - LC DUPLEX ONLY

LENGTHS ALL LENGTHS AVAILABLE, CUSTOM MADE TO ORDER (USUAL LEAD TIME 10-12 WORKING DAYS)

IP67 SPECIFICATIONS Ingress of water in harmful quantity shall not be possible when the enclosure is immersed in water under defined conditions of pressure and time (up to 1 m of submersion). No ingress of dust; complete protection against contact (dust tight).

Fibre Optic CableQuick Reference Guide

More Information If you require any more information please contact us:



www.PlusOptic.com

Documents

Transceiver Quick Reference Guide - PlusOptic€¦ · PlusOptic offer the widest range of transceivers available on the market today, with a broad range of data rates, distances and