Output Power Range:

Overload Power Limitation:

1~150W

1

I/P-O/P: 3750Vac I/P-GND: <1800Vac

≥102%~125%

www.ltech-led.com

TD 150 12-E1M1- -

LED Intelligent Driver

Frequency:

Efficiency:

Inrush Current(typ.):

Leakage Current:

Output Current:

Output Voltage:

Output Voltage Range:

Ripple & Noise:

Output Power:

50/60Hz

≥85%

I/P-O/P: <0.5mA/230Vac

Max. 12.5A

12Vdc

Max. 150W

Cold start 50A cat 230Va tc: 85°C ta: -30°C ~ 60°C

20 ~ 95%RH, non-condensing

-40 ~ 80°C, 10~95%RH

±0.03%/°C(0-50°C)

Working Temperature.:

Working Humidity:

Storage Temp., Humidity:

Temp. Coefficient:

Vibration:

Main Characteristics

Protection

Dimming Interface:

Dimming Range:

Triac / ELV

Max. 0.1~100%.

12Vdc ±0.5Vdc

≤200mV

10~500Hz, 2G 12min./1cycle, period for 72min. each along X, Y, Z axes

1

Input Current: 230Vac≤0.8A

273×57×37mm(L×W×H)

278×59×42mm(L×W×H)

605g±10g

Others

Dimension:

Packing:

Weight(G.W.):

Safety & EMCWithstand Voltage:

Isolation Resistance:

Safety Standards:

EMC Emission:

EMC Immunity:

I/P-O/P: 100MΩ/500VDC/25°C/70%RH

IEC/EN61347-1, IEC/EN61347-2-13

EN55015, EN61000-3-2 Class C, IEC61000-3-3

EN61000-4-2,3,4,5,6,8,11, EN61547

Dimensions

Input Voltage Range: 200-240Vac ±10%

Shut down the output when non-load Voltage≥13~18V, auto recovers after fault condition is removed.

Over Voltage Protection:

Shut down automatically if short circuit occurs,auto recovers after faulty condition is removed.

Shut down the output when Current Load≥

102%~125%, auto recovers after faulty conditionis removed.

Over-heat Protection:

Over Load Protection:

Short Circuit Protection:

Shut down the output when PCB temp.≥110°C, auto recovers when temp. back to normal.

150 12.5A 12VdcW

Apply to leading edge and trailing edge TRIAC dimmers.

PWM digital dimming, no alter LED color rendering index.

Dimming range: Max. 0.1~100%.

.Efficiency > 85%

Short circuit / Over-heat / Over load / Over voltage protection.

Compliant with Safety Extra Low Voltage standard.

Suitable for indoor environments.

Dimming interface: Triac/ELV.

Attn: LUTRON is registered trademarks of Lutron Electronics Co., Inc. registered in the U.S. and other countries

The dimming range parameters adopted LUTRON dimming system as testing standards. The parameters may differ by using Triac/ELV dimming systems of different brands.

customize program forWe can clients' high requirements.* R

R

Triac

2

Connections

Update Time: 2016.10.31www.ltech-led.com

Triac Dim

Selecting between ordinary dimmer and dimming system

Turn off the power and then remove the housing of the LED driver to find right component on the PCB.

Shift system by selecting different contact pin (For installation professionals use only). Factory default as

common (For ordinary dimmer).

Ordinary dimmer

Dimming system

Ordinary dimmer and dimming system have different dimming precision, precision of dimming system is higher. To meet customers' requirements on perfect dimming effects, we LTECH designed two programme options.

Method:

common

system

0~100% Dimming

Triac