READING TIPwhen browsing through this catalogue it is easier

using two-up view(viewing the left & right side next to each other)!

FOR BEST RESULTS DO NOT

PRINT THIS PAGE!This page will interfere with the

correct page order when printing recto-verso.

Q u a l i t y P a r t s & S e r v i c e

The illustrations and photo’s in our catalogues and on our website are protected. It is illegal to copy these in any way or by any means.

You are permitted to print the pages for personal use only.

TRIUMPH TR5-250-61967-1976PARTS & ACCESSORIES CATALOGUE

F o u r t h E d i t i o n • 19 0 . 2 7 3 Q u a l i t y P a r t s & S e r v i c e

fill your customer number in for easy ordering

www.angloparts.complease visit our website for all contact information

Anglo Parts ShopsMAIN BRANCH BELGIUMNETHERLANDS • ITALY • GERMANY

Authorized Anglo Parts DealersFRANCE • NETHERLANDS • SPAINSWEDEN • FINLAND • SWITZERLANDCZECH REPUBLIC • SLOVAKIALUXEMBOURG • POLAND • HUNGARY

All Rights reserved. No part of this publication may be reproduced or absorbed in any catalogue or information system by any means, Mechanical, photographic, electronic or otherwise, without prior express written consent of Anglo-Parts n.v.

Fou r t h Ed i t i on • 190 .273 • Upda t ed De cembe r 2007 • © Ang lo Pa r t s nv 2007

TRIUMPH TR5-250-61967-1976PARTS & ACCESSORIES CATALOGUE

1© V a n G e s t e l B & C 2 0 0 2

IMPORTANT POINTS The general policies of our business are printed on the reverse side of our invoices and are on our website. Updates are printed in the most recent catalogues and price lists and are updated on the website. When you order goods from us you agree with our policies and accept them. You are always free to ask for an updated publication. The most recent will succeed all previous. Please read below, the most important points.

OUR SALESMEN We are not trained automotive technicians and can not be held responsible for errors we say or write, we are enthousiasts who like to help. For technical information, we recommend you use the books listed in this catalogue.

OUR CATALOGUES/WEBSITE We have made every effort to make sure that the information in our catalogues and on our website is correct. We can not be held liable or responsible if any mistake or inaccuracy exists in specification, pricing or part number. We have the right to correct any error. The illustrations and photo’s in our catalogues and on our website are only representations, products supplied may vary from illustrations and photo’s, but will function the same way with similar quality.

OUR PART NUMBERS & PRICES All parts ( or sets of parts ) have our own part number and refer to one item only. THE QUANTITY REQUIRED (“QTY”) stands for the quantity used for particular application. The quantity you order can be different and should be marked when you order. Parts not available new, might be available in second hand condition. These second hand parts are not always listed on the website or in our price lists. Information will be sent to you on request. Prices shown on the website and in the price lists are for one item and information only and are subject to change without prior notice. Prices on the website can be seen with or without VAT depending on your choice. Price lists supplied with the catalogues can exclude or include local VAT, this is indicated on each price list. Part numbers are made from six figures. The first three figures will indicate the nature of the part. For example 161 stands for nuts, 162 for screws, 163 for washers, etc. The condition of the part we sell is indicated on the website and in the price list. The following codes will appear on the website in the catalogue parts lists and on the price lists supplied with catalogues, near the number, for the parts which are.. SH - Second Hand, EX - supplied on an EXCHANGE BASIS, and a SURCHARGE will be invoiced. NA - Currently NOT AVAILABLE. LH - Left Hand or RH - Right Hand. Always viewed from the drivers seat. LHD - left Hand Drive, RHD Right Hand Drive, A/R - AS REQUESTED, means the quantity required can vary from application to application. USE - the part number has been replaced by an other part number indicated.

ORDERS Orders are welcome through the WEBSITE, E-MAIL, FAX, LETTER, TELEPHONE or by visiting a Anglo-Parts branch. For orders not made through our Website, can we please ask you to prepair the following, using our ORDER FORM. - Your CUSTOMER NUMBER, name, address, telephone number work/home, fax number, codice fiscale (for Italian customers only) or VAT number for european companies. - Specify if shipping address is different. - CAR TYPE INFORMATION, make, model, year build etc. - Provide Anglo Parts PART NUMBERS only. - Indicate the quantity desired and parts description. - Indicate method of payment: VISA, MASTER CARD, EURO CARD or advance payment by bank. - Once an order placed, we put this in the computer system and the processing of lables, lists and checking lists will follow. Changing an order already placed, will hold up the whole system and automatically cause delays, we therefore ask for your help by checking your order twice prior to send it to us. This will help us deliver the parts in time. Thank you for your understanding.

PAYMENTS CREDIT CARDS: At this time of writing, we accept the following credit cards: VISA, MASTER CARD, EURO CARD. Please supply credit card number ( mostly 16 figures ), expiring date and name as appears on the card. BANK: When your merchandise is being picked, packed in boxes, weighed and sized, the invoice will be made and we inform you of the total amount to be paid, invoice (Not for Website) number and our bank references. Please note the invoice number and your customer number with any payment you do.

SHIPMENT NATIONAL: We deliver door to door and goods including the transport costs must be paid at delivery C.O.D., if a credit card was not used. INTERNATIONAL: We ship UPS prepaid, for small parcels. The only cost still to be paid at reception might be your local TAX. For large or heavy parcels we use an economical and fast transport method. ANGLO PARTS packs its boxes very well and the risk of receiving damaged goods is very small, however the following must be noted. Anglo Parts will not be held responsible for goods lost or damaged in transit. For shortage or damage claims not caused by the transporter, a claim must be made within three days of receipt of the order. All packing materials should be retained. Transport of glass in not insurable and will be transported at your own risk.

RECEIVING YOUR GOODS For all shipments, by arrival, please check that no seal or tape is broken and the package is not damaged. In case of any damage or shortage, write this on the carrier’s sheet in accordance with the actual condition and quantity of contents BEFORE you sign the freight bill or receiving note. Keep your copy attached with the invoice and make a claim to the transport company immediately. In any case, save the packing material until everything is settled. Anglo Parts checks goods while picking from stock and again while packing but the final check must be made by the customer himself at arrival. Make sure that the parts received match the ones you ordered and that mechanical parts function correctly. Do not wait with checking the goods until you actually need them and report problems within three days of receiving the goods.

WARRANTY Almost all parts made for the classic car industry are made in small quantities by companies who are willing to do this at an acceptable price. We at Anglo Parts check the goods for approval but we are not able to inspect each individual product. It is the responsability of the user to make the final inspection of the part PRIOR TO fitting. Especially mechanical parts must be checked to make sure they are in perfect working condition. The warranty period starts from the invoice date, not from the installation date. Our parts carry normal and reasonable warranty but claims will be limited to the value of the component and in no case should cover labour, transport, failure of related component, failure resulting from faulty installation or parts being used for rally or competition. All products for warranty claim must be returned to the shop where you bought it by using the following procedures: the value must be over 8 euro, the goods must be sent back with shipping and taxes prepaid, all parts must be returned clean and well packed, once you or a third person has disassembled the part, our responsibility for it has ended. Anglo Parts will make the final decision of whether the unit was inherently defective or damaged during installation. We shall investigate this offer when we have received the goods back from you in undamaged condition. During the return these goods may not be damaged by poor packing or by transport. The warranty period for reconditionned parts is limited to 6 months and 4 months for rebuilt shock absorbers, most other parts are warranted against defects in material and workmanship by the original equipment manufacturer or by Anglo Parts nv for a period of one year starting with the date on the invoice.

RETURNS If you received an incorrect item, and the mistake is yours, we are willing to restock this item and we will credit the value of the goods less a 15% restocking charge. No returns will be accepted without your invoice copy, after 30 days from the invoice date, for bearings, pistons, piston rings, goods by meter, trim parts ( hoods, soft tops, tonneau covers, seat kits, panels etc.) books or any parts where installation has been attempted. Goods must be returned transport and taxes prepaid. Anglo Parts is not able to refund the taxes paid in the country of arrival, shipping or packing charges and commission we had to pay to the credit card company. You can use the value of this credit note again in a future order of the same value. We do not refund the value of credit notes.

SURCHARGE - CORE DEPOSITS A surcharge will be added on the price for parts offered on an exchange basis. The surcharge price can be seen on the website in the catalogue parts lists and is listed in our pricelist near the part number related and will be invoiced pending the return of the old reservicable unit. This surcharge will be refunded in full providing that we receive the unit complete, clean, drained of oil and returned within two months of our invoice date. Please also provide a copy of our invoice. All returns must be sent back with full shipping charge prepaid. If you export the old unit to us, a letter should be sent to us with your name, address, telephone number, date of sending and description of the goods you are returning, including the surcharge value. Please make some copies and stick one on the parcel, one into the packing and keep one for yourself. We will need this information for importing the goods. Upon its arrival we will immediately check the following points: is the packing well done and has there been any damage during the transport, is the old unit similar to the type of unit we have sent to you (correct original), is the unit complete and are the essential parts rebuildable. Please do not send a MGA wiper motor for exchange with a TD wiper motor, do not send a distributor without the advance system. In this latter sample we will refund the surcharge for the distributor less the value (in our opinion) of the advance system.

BACKORDERS Goods which are not in stock at the time of your order will be kept in backorder. We will inform you when these are available again and parts will be reserved for you for a period of fourteen days starting from the day you were informed. If you do not contact us within this period, we will put the part(s) back in our stock to be sold to other customers. By ordering you can also specify “No Backorders” or ask us to cancel all previous backorders. When a part you had on backorder becomes obsolete, we will let you know aswell. If you decide to take this part in used condition, please ask us and we will do our best to obtain it, if possible.

Important information

© V a n G e s t e l B & C 2 0 0 2

2

BELANGRIJKE PUNTENDe verkoopsvoorwaarden zijn op de achterzijde van de fakturen gedrukt en bevinden zich op onze website. Aanpassingen worden in de recentste katalogus of prijslijst gezet en op onze website bijgewerkt. Als u bij ons bestelt, gaat u akkoord met onze verkoopsvoorwaarden (en aanvaardt u ze). U mag altijd een nieuwe publikatie aanvragen. De recentste publikatie zal alle vorige vervolledigen en vervangen. Gelieve de belangrijkste punten hieronder vermeld te lezen.

ONZE VERKOPERSWe zijn geen getrainde technici en zijn niet aansprakelijk voor fouten die we zeggen of schrijven. We zijn autofanaten die u willen helpen. Voor technische uitleg bevelen we u de boeken uit de lijst in de katalogus aan.

ONZE KATALOGIGeen inspanning was ons te groot de juiste informatie in onze katalogi en op onze website te zetten. We kunnen niet aansprakelijk gesteld worden voor fouten of onnauwkeurigheden i.v.m. de specifiëring. de prijsbepaling of de onderdeelnummers. We hebben het recht een fout te verbeteren. De Illustraties en foto’s in onze katalogen en op onze website zijn slechts voorstellingen en er kunnen qua vorm kleine verschillen optreden, maar de geleverde produkten blijven qua kwaliteit en bestemming hetzelfde.

ONZE ONDERDEELNUMMERS EN PRIJZENAlle onderdelen (of sets van onderdelen) kregen van ons een stuknummer. De vereiste hoeveelheid (QT) staat voor de hoeveelheid voor afzonderlijk gebruik. De hoeveelheid die u vraagtkan verschillen en moet naast elk nummer van het onderdeel. dat u bestelt, vermeld staan. Gelieve te verwijzen naar onze recentste prijslijsten om de leverbaarheid te garanderen. Onderdelen die niet leverbaar zijn, kunnen soms tweedehands geleverd worden. Deze tweedehands onderdelen staan niet altijd in onze prijslijsten en op onze website. De prijzen in onze prijslijsten en op onze website zijn prijzen per stuk en staan er alleen ter informatie. Ze kunnen plots veranderen naargelang de stijging of daling van de inkoopprijs. Ze kunnen zonder of met B.T.W. vermeld staan. Dit is op elke prijslijst aangeduid. De stuknummers bestaan uit zes cijfers. De eerste drie cijfers geven de aard van het stuk aan. 161 staat bijvoorbeeld voor moeren, 162 voor schroeven, 163 voor platte rondellen. De staat van het onderdeel wordt in de prijslijst en op de website vermeld of kan worden herkend aan het nummer. De volgende kodes zullen in de prijslijst en op de website naast het nummer voor stukken, die niet nieuw geleverd worden, staan: SH = tweedehands, EX = geleverd op ruilbasis en een supplement zal worden aangerekend. NA = op het ogenblik niet beschikbaar. LH = links of RH = rechts. Bekeken vanuit de bestuurderszit. LHD = bestuurder aan linkerkant of RHD = bestuurder aan de rechterkant. A/R = Zoals vereist. Dit betekent dat de vereiste hoeveelheid naargelang de toepassing kan verschillen. USE = het stuknummer wordt door het aangegeven nummer vervangen.

BESTELLINGENU kan altijd bestellen via onze website, per e-mail, fax, brief, telefoon, of gewoon in de winkel. Voor bestellingen die niet langs onze website gebeuren gelieve rekening te houden met de volgende gegevens, wanneer u ons bestelformulier gebruikt: - uw klantennummer, naam, adres, telefoonnummer werk/thuis, faxnummer, VAT(BTW)-nummer voor bedrijven; - specifieer als het leveringsadres verschilt; - informatie over de auto, merk, model, bouwjaar, enz.; - gebruik zoveel mogelijk onze onderdeelnummers. Dit zal de behandeling van uw bestelling vergemakkelijken; - geef het aantal stukken aan en beschrijf de onderdelen; - duid de betaalwi jze aan: Bank (voorafbetaling), VISA, EUROCARD of MASTER CARD. - Eens uw beselling geplaatst, zetten we deze in de computer. Automatisch volgen dan de etiketten, de picking lists en de checking lists. Als u een geplaatste bestelling wil wijzigen, kan deze het hele systeem in de war sturen en, op die manier fouten of vertragingen veroorzaken. Daarom vragen we u de bestelling goed na te kijken, vóór u ze plaatst. Dit zal ons helpen de onderdelen op tijd te leveren. We danken u voor uw begrip.

BETALINGENKredietkaart: Op het tijdstip van publikatie aanvaarden we volgende kredietkaarten: VISA, EUROCARD, ACCES CARD, MASTERCARD. Gelieve het rekeningnummer, de vervaldag (en kode indien aangegeven) en de kaarthoudersnaam te vermelden.Bank: (Niet voor bestellingen via onze website) Als de goederen bijeengebracht, ingepakt, gewogen en gemeten zijn, zal het faktuur opgesteld worden en zullen we het totale te betalen bedrag, het faktuurnummer en onze bankgegevens meedelen. Gelieve het faktuurnummer en het klantennummer op elke betaling te noteren. (De betaling dient te gebeuren zonder bankkosten voor de begunstigde.)

VERZENDINGNationaal: We leveren bij u thuis, en de goederen, transportkosten inbegrepen, moeten bij levering C.O.D. betaald worden, als u geen kredietkaart gebruikt.Internationaal: We verzenden via UPS (United Parcel Services) voor kleine pakken, waarbij de transportkosten voorafbetaald zijn. Bij ontvangst betaalt u nog alleen de TAX indien u

in een niet EEG land woont. Voor grote en zware pakken gebruiken we een goedkope en snelle transportmethode. Anglo Parts pakt zijn goederen goed in en het risiko op beschadiging is zeer klein. Toch moet u met het volgende rekening houden. Anglo Parts kan niet aansprakelijk gesteld worden voor verloren of beschadigde goederen tijdens het transport. Klachten over verlies en schade, die niet door de vervoerder veroorzaakt werden, moeten binnen drie dagen na de ontvangst van de bestelling ingediend worden. Al het verpakkingsmateriaal moet ter verifikatie bijgehouden worden. Het vervoer van glas is niet verzekerbaar en gebeurt op risiko van de koper.

ONTVANGST VAN DE GOEDERENGelieve bij de ontvangst van elke verzending na te kijken of zegels en plakbanden niet stuk zijn en het pak niet beschadigd is. In geval van beschadiging of verlies, schrijft u dit op de vrachtbrief in overeenstemming met de aktuele toestand en hoeveelheid van de inhoud van uw verzending, voordat u het ontvangstbewijs tekent. Bewaar uw kopie bij het faktuur en dien onmiddellijk bij de transportfirma een klacht in. Hou in elk geval de verpakking tot de zaak geregeld is. Bij Anglo Parts kontroleren twee personen de goederen, de eerste keer tijdens het bijeenbrengen en de tweede keer bij het verpakken van de goederen om zeker geen fouten te maken. Uiteindelijk moet de klant zelf de allerlaatste kontrole bij ontvangst uitvoeren. Vergewis er u van dat u alle gefaktureerde goederen ontvangen heeft en dat alle mechanische goederen werken. Wacht niet met de kontrole van de goederen tot u ze werkelijk nodig heeft en meld problemen binnen drie dagen na ontvangst.

DE WAARBORGBijna alle onderdelen voor klassieke wagens worden in kleine hoeveelheden gefabriceerd door bedrijven, die dit voor een aanvaardbare prijs doen. Anglo Parts probeert zoveel mogelijk zelf de goederen na te kijken, maar we kunnen niet elk produkt kontroleren. Vóór de montage moet de gebruiker de Iaatste kontrole zelf uitvoeren. Vooral de mechanische produkten moeten worden nagekeken om er zeker van te zijn dat ze in de beste staat verkeren. De garantieperiode begint vanaf de faktuurdatum, niet vanaf de datum van plaatsing. De waarborg op onze onderdelen is normaal en redelijk, maar de klachten zijn beperkt tot de waarde van het komponent en dekt in geen geval: uurloon, transportkosten, fouten bij een komponent dat eraan vastzit, fouten als gevolg van een slechte plaatsing of onderdelen die voor rally of kompetitie gebruikt worden. Bij klachten i.v.m. de waarborg moeten alle produkten naar de winkel van aankoop teruggebracht worden. Daarbij moet u de volgende punten in acht nemen: -de waarde moet groter zijn dan 7,5 Euro -de verzendingskosten en taksen moeten bij terug-zending van de goederen voorafbetaald zijn; -alle goederen moeten schoon en goed verpakt teruggestuurd worden. Zodra U of derden het onderdeel uit elkaar hebben gehaald, zijn we niet meer aansprakelijk. Uiteindelijk beslist Anglo Parts zelf of het gaat over een intrinsiek defekt aan de eenheid, of het defekt bij plaatsing veroorzaakt werd. Goederen beschadigd door slechte verpakking of transport tijdens de terugzending komen niet in aanmerking voor onderzoek.

TERUGZENDENWanneer U een verkeerd onderdeel als gevolg van uw foute bestelling ontvangen hebt, zijn we bereid het terug te nemen tegen de waarde van het goed voor onderdelen met een waarde van minimum 7,5 Euro. We rekenen u wel 15 % heropnamekosten aan. We aanvaarden geen terugzendingen: zonder een kopie van het faktuur, 30 dagen na de faktuurdatum, van lagers, zuigers, zuigerringen, goederen per lopende meter, bekledingsonderdelen (linnen kappen, hoofdsteunen, dekzeilen, zetelovertrekken, panelen, enz.) of elk ander goed waarbij men met de plaatsing wou beginnen. Bij terugzending moeten de taksen en transportkosten voorafbetaald zijn. Anglo Parts kan u, verpakkings-of verzendingskosten van het land van ontvangst en de kommissie, die we aan de kredietkaarteninstelling moesten betalen, niet vergoeden. De uitbetalling geschied via een waardebon.

SUPPLEMENTEen supplement komt bovenop de prijs voor onderdelen, die op ruilbasis worden aangeboden. Dit supplement staat in de prijslijst en op onze website naast het betrokken onderdeelnummer en zal gefaktureerd worden in afwachting van de terugzending van de oude, ingeruilde eenheid. Dit supplement wordt terugbetaald wanneer we de eenheid volledig, schoon, zonder olie en twee maanden na de faktuurdatum terugkrijgen. Gelieve ook een kopie van ons faktuur toe te voegen. De verzendingskosten moeten volledig door u voorafbetaald worden. Indien u ons de oude eenheid terugstuurt, vragen we u een brief te sturen met uw naam, adres, telefoonnummer, verzendingsdatum en beschrijving van de goederen, het supplement inbegrepen. Gelieve enkele kopieën te maken waarvan één exemplaar op het pak te bevestigen, één in het pak te steken en één zelf te bewaren. We hebben ze nodig bij de invoer van de goederen. Bij de aankomst van de goederen kijken we onmiddellijk de volgende punten na: - Is het stuk goed verpakt ? - Werd het tijdens het transport beschadigd ? - Komt de oude eenheid met het type, dat we u zonden, overeen (het juiste origineel) ? - Is de eenheid volledig en zijn de essentiële onderdelen nog reviseerbaar ? Gelieve geen MGA ruitenwissermotor te sturen voor ruil met een TD ruitenwissermotor of zend ons geen motor met een gebroken krukas. In dit laatste geval zullen we alleen de stukwaarde min de waarde (volgens onze beoordeling) van de krukas terugbetalen.

BACKORDERSDe goederen, die we op het tijdstip van uw bestelling niet in voorraad hebben, houden we in “backorder”. We laten u dan weten wanneer we ze u opnieuw kunnen leveren. We reserveren de onderdelen voor u voor een periode van veertien dagen (vanaf het ogenblik waarop we onze brief gepost hebben). Indien u ons binnen die periode niet gekontakteerd hebt zijn deze onderdelen niet meer voor U gereserveerd. Als u bestelt, kan u altijd specifiëren “geen backorders” of ons vragen alle vorige te annuleren. Als een onderdeel in “backorder” niet meer kan worden geleverd, laten we u dit ook weten. Als u dan beslist dit onderdeel tweedehands te kopen, gelieve dit te vragen en we zullen al het mogelijke doen het onderdeel te vinden.

Belangrijke informatie

3© V a n G e s t e l B & C 2 0 0 2

Les illustrations dans ce catalogue ne sont que des représentations. Les produits fournis peuvent être différents en ce qui concerne la forme, mais la qualité et le but restant pareils.

LES POINTS IMPORTANTS Les conditions de vente sont imprimées au verso des factures et les modifications sont mentionnées dans la catalogue la plus récent et dans la liste de prix. Si vous commandez chez nous, vous êtes d’accord avec nos conditions de vente (vous le acceptez). Vous pouvez toujours demandez une nouvelle publication. L’édition complètera et remplacera toutes les précédentes. Vieillez lire les points les plus importants, mentionnés ci-dessous.

NOS VENDEURS Nous ne sommes pas des techniciens bien expérimentés et nous ne somme pas responsable des erreurs que nous disons ou écrivons. Nous sommes des enthousiastes et voulons vous aider. Pour une explication un peu plus technique, nous vous recommandons les livres de la liste de notre catalogue.

NOS CATALOGUES Nous nous sommes efforcés à mettre dans notre catalogue des information correctes. Nous ne pouvons pas être rendu (civilment) responsables d’erreurs ou d’inexactitudes concernant la spécification, l’estimation, ou les numéros de pièce. Nous avons le droit de corriger une faute.

NOS NUMEROS DE PIECE ET LES PRIX Nous avons donné à chaque pièce (ou sets de pièces) un numéro. La quantité requise (QT) se réfère à la quantité pour un usage particulier. La quantité que vous demander peut être différente et doit se trouver à côté de chaque numéro de pièce que vous commandez. Veuillez vous référer à nos listes de prix le plus révicentes pour garantir la disponibilité. Des pièces non disponibles peuvent être fournies en occasion. Ces pièces en occasion ne se trouvent pas toujours dans nos listes. Les prix dans nos listes de prix sont des prix par pièce et s’y trouvent seulement à titre informatif. Ils peuvent varier selon l’augmentation ou la baisse des prix d’achat. Ils peuvent être mentionnés sans ou avec la T.V.A. Ceci est indiqué dans la liste de prix. Les numéros de pièce se composent de chiffres. Les trois premiers chiffres indiquent la nature de la pièce. 161 se réfère par example à écrous, 162 à boulons, 163 à rondelles plates. L’état de la pièce est mentionné dans la liste de prix ou peut être reconnu au numéro. Les codes suivants se trouvent dans la liste à côté du numéro de pièces qui ne sont pas livrées comme nouvelles. SH = en occasion, EX - fourni sur base d’échange et on vous comptera un supplément. NA - pas disponible en ce moment. LH - gauche ou RH - droite. Vu du point de vue du siège du conducteur. LHD - le conducteur à gauche. RHD - le conducteur à droite. A/D - comme requis. Cela signifie que la quantité requise peut être différents selon l’application. USE - le numéro de pièce a été remplacé par le numéro indiqué.

LES COMMANDES Vous pouvez toujours commander par courrier, par téléphone, par téléfax, ou bien au magasin. Veuillez tenir compte des données suivantes si vous employez notre bon de commande: - votre numéro de client, votre nom, votre adress, votre numéro de téléphone travail/privé, votre numéro de fax, le numéro de T.V.A. pour les entreprises; - spécifiez si l’adress de livraison est différente; - informations sur la voiture: la marque, le modèle, l’année de construction, etc.; - utilisez autant que possible nos numéros de pièce. De cette manière, nous pouvons traiter vos commandes plus rapidement; - donnez le nombre des pièces et décrivez les; - indiquez le moyen de paiement: Banque, paiement à l’avance, VISA, EUROCARD, MASTER CARD. Une fois votre commande passée, nous l’introduisons dans l’ordinateur. Les étiquettes, les “picking lists” et les “checking lists” suivent automatiquement. Si vous voulez modifier une commande passée, vous risquez de confondre tout le système et, de cette manière, causer des erreurs ou des retards. C’est pourquoi nous vous demandons de bien contrôler votre commande avant de la passer. Cela nous aidera à livrer les pièces à temps. Nous vous remercions pour votre aide.

LES PAIEMENTS La carte de crédit: Au moment de la publication, nous acceptons les cartes de crédits suivantes: VISA, ACCESSCARD, MASTERCARD. Veuillez mentionner le numéro de compte, l’échéance (et le code si indiqué) et le nom du titulaire de carte. La Banque: Si les produits ont été ramassés, emballés, pasés et mesurés, on rédigera la facture et nous communiquerons le montant total à payer, le numéro de la facture et nos données bancaires. Veuillez noter pour chaque paiement le numéro de client. Le paiement doit arriver sans frais bancaires pour le bénéficiaire.)

L’EXPEDITION National: nous livrons chez vous, et les produits, frais de transport inclus, doivent être payés COD à la livraison si vous n’utilisez pas de carte de crédit. International: nous expédions par U.P.S. (United Parcel Services). Il faut payer d’avance les frais de transport pour les petits paquets. À la réception, vous ne payerez plus que la TAXE si vous n’habitez pas dans un pays de la CEE. Pour les paquets plus grands, nous utilisons une méthode plus rapide et moins chère. Anglo Parts emballe bien les produits et la risque d’endommager est très petit. Il faut cependant tenir compte de ce qui suit. Anglo Parts ne peut être rendue responsable produits endommagés ou perdus pendant le transport. Il faut introduire les plaintes de pertes ou dégats dans trois jours après la réception de la commande. Il faut garder le matériel d’emballage pour vérification. Nous n’assurons pas le transport de verre et le transport se passe au risque de l’acheteur.

LA RECEPTION DES PRODUITS Veuillez contrôler à la réception de chaque envoi si les cachets et les scathes sont cassés si le paquet n’est pas endommagé. En cas de pertes ou dégâts, vous l’inscrivez sur la connaissement en concordance avec l’état actuel et le quantité de votre envoi avant de signer le reçu. Gardez la copie avec la facture et introduisez immédiatement une plainte chez le transporteur. Gardez en tout cas l’emballage jusqu’à ce que les problèmes soient résolus. Chez Anglo Parts, deux personnes vérifient les produits, d’abord au ramassage et ensuite à l’emballage des produits pour éviter des erreurs. Finalement, le client même doit vérifier et dernier lieu les produits à la réception. Vérifiez si vous avez reçu tous les produits et si tous les produits mécaniques fonctionnent. Ne reportez pas le contrôle jusqu’au moment où vous en avez besoin, et rapportez les produits dans trois jours après la réception.

LA GARANTIE Presque toutes les pièces de voitures classiques sont fabriquées par des entreprises qui le font à un prix raisonable. Anglo Parts essaie, autant que possible, de contrôler elle-même les produits, mais nous ne pouvons pas contrôler chaque produit. Avant le montage, le client doit effectuer lui-même le dernier contrôle. Il faut vérifier les produits mécaniques pour être sûr qu’ils se trouvent en bon état. La période de garantie commence à partir de la date de la facture, et pas à partir de la date de l’installation. La garantie de nos pièces est normale et raisonnable, mais les plaintes sont limitées à la valeur de l’élément et ne couvre en aucun cas le salaire à l’heure, le transport, les défauts d’un élément relatif, les défauts à la suite d’une mauvaise installation ou les pièces qui sont utilisées pour les “rally” ou les competitions. En cas de plainte concernant la garantie, il faut rapporter tous les produits au magasin d’achat en tenant compte des points suivants: - la valeur doit dépasser 7,5 Euro les frais d’expédition et les taxes doivent être payés d’avance au renvoi des produits; - il faut renvoyer les produits propres et bien emballés. A partir du moment où une tierce personne a démonté les pièces, nous ne sommes plus responsables. Finalement, Anglo Parts décide elle-même s’il s’agit d’un défaut inhérant à l’unité ou bien d’un défaut dû à l’installation. Les produits endommagés par un mauvais emballage ou un transport inadéquat pendant le renvoi ne seront pas pris en considération de vérification.

LA REEXPEDITION Si vous avez reçu une fausse pièce à la suite de votre commande incorrecte, nous sommes prêts à reprendre la pièce contre la valeur du produit, moins 15% des frais de reprise. Veuillez noter que les pièces doivent avoir une valeur de minimum 7,5 Euro. Nous n’acceptons pas de réexpédition sans une copie de la facture, trente jours après la date de la facture, des produits au mètre, des anneaux-pistons, des pièces de rechange de garniture intérieur (comme des capotes, des moquettes, des velours, des couvres toneau) ou de toute pièce dont l’installation a déjà été commencée. A la réexpédition, tous les frais de transport et les taxes doivent être payés d’avance. Anglo Parts ne peut pas rembourser les frais d’emballage et d’expédition du pays de réception, ainsi que la provision qu’elle a dû payer aux carte crédits. Nous vous remboursons ce montant avec un “Gift Certificate”.

LE SUPPLEMENT Un supplément s’ajoute au prix pour les pièces qui seront offertes sur bases d’échange. Ce supplément se trouve dans la liste de prix à côté de numéro de pièce y relatif et sera facturé en attente de renvoi de la vieille unité échangée. Ce supplément sera remboursé quant nous recevrons, deux mois après la date de la facture, l’unité entière, propre et sans huile. Veuillez aussi y ajouter une copie de notre facture. Il faut que vous payiez les frais d’expédition d’avance. Si vous nous renvoyez la vieille unité, nous vous demandons d’envoyer une lettre avec votre nom, votre adress, votre numéro de téléphone, la date d’expédition et la description du produit, le supplément inclus. Veuillez faire quelques copies, dont vous en attachez une au paquet, dont vous en mettez un dans le paquet et dont vous en gardez une pour vous-même. Nous en avons besoin à l’importation des produits. A l’arivée des produits, nous vérifions les points suivants: - la pièece, est-elle bien emballé? - A-t-elle été endommagée pendant le transport? - le vieille unité, correspond-t-elle au type nous vous avons envoyé (l’original)? - l’unité, est-elle complète et les pièces essentielles sont-elles encore révisables? Veuillez ne pas envoyer de moteur d’essuie-glace au lieu d’un moteur Spitfire ou ne envoyez pas un moteur avec un arbre-coude cassé. Dans ce dernier cas, nous ne rembourserons que la valeur de la pièce moins le valeur de l’arbre-coude (selon notre estimation).

LES “BACKORDERS” Les produits que nous n’avons pas en stock au moment de votre commande sont gardés en “backorder”. Nous vous laissons savoir quand nous pouvons à nouveau vous les livrer. Nous vous réservons les pièces pendant une période de 15 jours (à partir du moment où nous avons posté notre lettre). Si vous nous contactez pas pendant cette période, les pièces ne vous sont plus réservées. Si vous commandez, vous pouvez toujours spécifier “pas de backorders”, ou bien nous demander d’annuler tous les “backorders” précédents. Si nous ne pouvons plus livrer une pièce en “backorder”, nous vous le laissons savoir. Si vous décidez d’acheter cette pièce en occasion, veuillez le demander et nous ferons notre possible pour la trouver.

Informations importantes

© V a n G e s t e l B & C 2 0 0 2

4

Wichtige Auskünfte1. EINFÜHRUNG

Die Abbildungen in diesem Katalog oder auf unserer Webseite sind nicht exakt oder maßstabsgerecht. Die tatsächlichen Teile können geringfügig von den Abbildungen abweichen, die Qualität und die Verwendbarkeit werden jedoch nicht beeinträchtigt. Die Rover-Gruppe liefert keine Ersatzteile mehr, daher übernimmt ANGLO-PARTS diese Dienstleistung, indem weltweit Rover-Ersatzteile von ANGLO-PARTS eingeführt, neu hergestellt und ausgeliefert werden. Wir benutzen dazu Original “blue prints” und Original-Musterbauteile, um einen erschwinglichen Preis zu garantieren. Die Musterteile werden außerdem noch von anderen Originalherstellern wie z. B. Lucas, Lockheed, Armstrong, Vandervell, Glacier, Borg & Beck etc. hergestellt. Wenn Originalteile dieser Hersteller verfügbar sind, wird ANGLO-PARTS Ihnen diese Teile liefern, auch wenn sie etwas teurer sind. Wir sind der Meinung, dass Qualität und Authentizität an erster Stelle stehen sollten.

2. ALLGEMEINE GESCHÄFTSBEDINGUNGENWir verkaufen und liefern ausschließlich auf der Basis unserer Allgemeinen Verkaufs- und Lieferbedingungen, die auf der Rückseite der Bestellformulare und Rechnungen abgedruckt sind. Sie finden diese Allgemeinen Geschäftsbedingungen auch in diesem Katalog. Wenn Sie bei uns bestellen, sind Sie mit unseren Verkaufsbedingungen einverstanden und akzeptieren diese. Die Firma ANGLO-PARTS behält sich vor, die Allgemeinen Geschäftsbedingungen von Zeit zu Zeit neuen Gegebenheiten anzupassen, und die jeweils letzte Fassung findet Anwendung auf die Verträge.

3. TECHNIKFür technische Erläuterungen empfehlen wir Ihnen die Handbücher im Inhaltsverzeichnis des Kataloges. Wir übernehmen keine Gewähr für technische Informationen in unseren Katalogen, diese dienen lediglich der Darstellung unserer Waren.

4. KATALOGWir haben uns bemüht, unsere Kataloge so sorgfältig wie möglich zu erstellen. Wir übernehmen keine Verantwortung für Fehler oder Ungenauigkeiten im Zusammenhang mit der Spezifizierung, der Preisbestimmung oder den Ersatzteilnummern. Wir behalten uns das Recht vor, aufgetretene Fehler ohne Rechtsnachteile für uns zu verbessern. Gewährleistungsansprüche entstehen nicht, wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder nachlässige Behandlung und natürlichen Verschleiß des Liefergegenstandes sowie Schäden aus sportlichen Einsätzen. Zugesicherte Eigenschaften müssen ausdrücklich schriftlich im Einzelnen als solche bezeichnet werden.

5. ERSATZTEILNUMMERN UND PREISEAlle Ersatzteile oder Gruppen von Ersatzteilen haben von uns eine Ersatzteilnummer erhalten. Die Abkürzung QTY steht für die für einen bestimmten Einsatz erforderliche Menge des jeweiligen Ersatzteiles. Die von Ihnen bestellte Liefermenge kann davon abweichen und sollte deutlich neben der jeweiligen Ersatzteilnummer angegeben werden. Bitte verwenden Sie die jeweils neueste Preisliste, um die Lieferbarkeit zu gewährleisten. Ersatzteile, die nicht lieferbar sind, können wir manchmal aus zweiter Hand besorgen. Diese Gebraucht-Ersatzteile stehen nicht immer in unserer Preislisten. Die Preise in unserer Preisliste sind Stückpreise, sie können sich infolge einer Veränderung der Einkaufspreise ebenfalls ändern. Die Listenpreise beinhalten, falls nicht anders bezeichnet, die jeweilige gesetzliche Mehrwertsteuer. Die Ersatzteil-Nummern bestehen aus sechs Ziffern. Die ersten drei Ziffern geben die Art des Ersatzteils an: 161 z. B. steht für Muttern, 162 für Schrauben und 163 für Scheiben. Der Zustand des Ersatzteiles wird in der Preisliste erwähnt oder kann anhand der Nummer erkannt werden. Die folgenden Codes stehen in der Preisliste neben der Ersatzteilnummer, falls dieses Teil nicht neu geliefert werden kann: SH bedeutet aus zweiter Hand, EX wird auf Tauschbasis geliefert, und ein Mehrpreis (Surcharge/Surch) wird berechnet, NA bedeutet im Augenblick nicht erhältlich. LH bedeutet links, RH rechts - jeweils vom Fahrer aus gesehen. LHD bedeutet Fahrer auf der linken Seite und RHD Fahrer auf der rechten Seite. A/R bedeutet “wie erforderlich”, das heißt, dass die erforderliche Menge nach dem Zweck unterschiedlich sein kann. Durch die Abkürzung USE wird eine neue Ersatzteilnummer bezeichnet, welche die ursprüngliche Nummer ersetzt.

6. AUFTRAGSERTEILUNGSie können per Fax, Brief, telefonisch oder wie gewohnt im Shop bestellen. Bei Verwendung unseres Bestellformulars möchten wir Sie bitten, dieses vollständig auszufüllen: Ihre Kunden-Nummer, Adresse, Telefon- und Faxnummer, Umsatzsteuer-ID-Nummer (gewerblich). - Spezifizieren Sie die Lieferadresse, falls diese von der Rechnungsanschrift abweicht. - Geben Sie uns die vollständigen Angaben zu Ihrem Fahrzeug wie Marke, Typ, Baujahr usw. - Benutzen Sie ausschließlich unsere Ersatzteilnummern, dadurch kann Ihre Bestellung schneller bearbeitet werden. - Geben Sie die gewünschte Menge der Ersatzteile unter Verwendung der Beschreibung im Katalog an. - Geben Sie die Art der Zahlungsweise an. - Sobald wir Ihren Auftrag erhalten haben, wird dieser elektronisch weiterverarbeitet, automatisch werden dann daraus die Bestellungen, Lieferscheine und Rechnungen erstellt. Wenn Sie einen einmal gegebenen Auftrag ändern möchten, kann dies zu Fehlern oder Verspätungen führen. Deshalb möchten wir Sie bitten, den Auftrag vor Erteilung genauestens zu überprüfen. Dies hilft uns, die Ersatzteile pünktlich zu liefern. Vielen Dank für Ihr Verständnis.

7. ZAHLUNGSWEISESobald die Bestellung konfektioniert, verpackt, gewogen und gemessen wurde, wird die Rechnung erstellt, und wir werden Ihnen den vollständigen Rechnungsbetrag, die Rechnungsnummer und unsere Bankverbindung mitteilen. Bitte geben Sie bei jeder Zahlung die Rechnungsnummer und Ihre Kundennummer an. Kreditkarten: Zum Zeitpunkt der Drucklegung dieser Allgemeinen Informationen akzeptieren wir folgende Kreditkarten: Visa, Eurocard, Accesscard, Mastercard. Bitte geben Sie bei Kreditkartenzahlung die Kartennummer, das Verfalldatum (und die Prüfnummer, wenn angegeben) sowie den Namen des Karteninhabers an. Eine Zahlung per Nachnahme ist nur im Inland möglich.

8. VERSENDUNGDa der Versand unserer Waren auf Gefahr und Kosten des Bestellers erfolgt, bitten wir Sie, in der Bestellung zu spezifizieren, ob Sie die Waren abholen oder einen Dritten mit der Lieferung beauftragen. ANGLO-PARTS wird die bestellten Waren ausreichend verpacken, um das Risiko von Transportbeschädigungen zu reduzieren. ANGLO-PARTS ist nicht verantwortlich für Ware, die beim Transport verlorengegangen oder beschädigt wurde. ANGLO-PARTS übernimmt keine Haftung für den Frachtführer, der im Auftrag des Bestellers tätig wird. Wir empfehlen daher bei Erhalt der Ware: Überprüfen Sie bitte bei Lieferung der Ware, ob die Verpackung, eventuelle Siegel oder Klebestreifen aufgebrochen wurden und ob die Verpackung beschädigt ist. Für den Fall einer Beschädigung oder das Fehlen von Teilen machen Sie bitte eine entsprechende Notiz auf den Frachtbrief hinsichtlich des Zustandes und des Inhaltes Ihrer Sendung, bevor Sie den Erhalt quittieren. Behalten Sie Ihre Kopie der Rechnung und setzen Sie sich sofort mit Ihrem Frachtführer in Verbindung. Bewahren Sie die Verpackung auf, bis die Fragen geklärt wurden. Wir überprüfen zweimal die Vollständigkeit der Bestellung, das erste Mal beim Konfektionieren und das zweite Mal beim Verpacken der Waren. Daneben sind Sie allerdings verpflichtet, die letzte Kontrolle durchzuführen. Wir verweisen auf die Fristen in unseren Allgemeinen Verkaufs- und Lieferbedingungen.

9. RÜCKSENDUNGENWenn Sie ein Ersatzteil erhalten, für dieses aber keine Verwendung haben und Sie diese Falschbestellung zu vertreten haben, sind wir bereit, diesen Artikel zurückzunehmen. Rücksendungen erfolgen auf Kosten und Gefahr des Bestellers. Wir werden Ihnen den Rechnungsbetrag der Waren abzüglich einer Wiedereinlagerungsgebühr von 15 % erstatten. Wir akzeptieren keine Rücksendung ohne eine Durchschrift unserer Rechnung. Nach Ablauf von mehr als 30 Tagen nach dem Rechnungsdatum akzeptieren wir keine Rücksendung. Lager, Kolben, Kolbenringe, Meterware und Verkleidungsteile (Kopfstützen, Verdecke, Verdeckabdeckungen, Sitzbezüge, Türverkleidungen) sind vom Umtausch ausgeschlossen. Dies gilt auch für Ersatzteile, mit denen ein Installationsversuch unternommen wurde. Wir erstatten keinerlei Verpackungs- und Versandkosten sowie Servicegebühren, die wir an Kreditkartenfirmen bezahlt haben. Die Rückzahlung erfolgt über einen Warengutschein in Höhe des Rückzahlungsbetrages.

10. LIEFERUNG VON ERSATZTEILEN AUF AUSTAUSCHBASISFür Ersatzteile, die von uns auf Austauschbasis angeboten werden, berechnen wir einen Mehrkostenpreis. Dieser Mehrkostenpreis ist in unserem Preisverzeichnis neben der betreffenden Ersatzteilnummer angegeben. Bei Bestellung eines Ersatzteiles auf Austauschbasis wird neben dem Preis für das Ersatzteil auch der Mehrkostenpreis in Rechnung gestellt. Dieser Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt wir erhalten vom Besteller das entsprechende Austauschteil komplett, sauber und ölfrei und innerhalb von zwei Monaten nach unserem Rechnungsdatum. Bitte senden Sie eine Kopie unserer Rechnung mit. Die Versendung des Austauschteiles erfolgt auf Gefahr und Kosten des Bestellers. Wenn Sie uns das Austauschteil aus dem Ausland schicken, sollten Sie uns einen Brief beilegen, der Ihren Namen, Anschrift, Telefonnummer und das Versendungsdatum sowie eine Beschreibung der Güter beinhaltet und den Mehrkostenbetrag. Bitte fertigen Sie von diesem Brief einige Kopien an, fügen eine dem Paket bei, kleben eine auf das Paket und behalten eine weitere für Ihre eigenen Unterlagen. Wir benötigen diese Informationen für die Einfuhrabfertigung. Bei Eingang der Ware überprüfen wir sofort die folgenden Punkte: War das Teil ausreichend verpackt oder sind Transportbeschädigungen aufgetreten? (Wenn ja, werden wir Sie sofort davon in Kenntnis setzen). Entspricht das Altteil dem von uns gelieferten Teil? Ist das Altteil vollständig, und sind die wichtigsten Ersatzteile noch wiederherstellbar? Bitte beachten Sie, dass wir im Falle der Übersendung eines Falschteiles oder eines beschädigten Teiles nur den jeweiligen Stückwert des zurückgesandten Teiles erstatten. Insoweit führen wir eine Schätzung durch.

11. NACHLIEFERUNGENWaren, die zum Zeitpunkt Ihres Auftrages nicht vorrätig sind, werden als Nachlieferung (Backorder) behandelt. Wir werden Sie sofort über die Verfügbarkeit der Teile informieren. Das Ersatzteil ist mit einer Frist von 14 Tagen nach Absendung unserer Benachrichtigung für Sie reserviert. Sollten Sie diese Frist verstreichen lassen, verfällt die Nachlieferung. Wenn Sie keine Nachlieferung erhalten möchten, können Sie bei Auftragserteilung auch ”keine Nachlieferungen” vermerken. Nachlieferungen können zu jeder Zeit annulliert werden. Wenn das Ersatzteil nicht mehr lieferbar ist, werden wir Sie sofort davon in Kenntnis setzen. Sie können dann entscheiden, ob Sie das Ersatzteil aus zweiter Hand kaufen wollen. Sobald uns ein entsprechender Auftrag vorliegt, werden wir uns bemühen, dieses Ersatzteil für Sie zu besorgen.

5© V a n G e s t e l B & C 2 0 0 2

Allgemeine Verkaufs- und LieferbedingungenAllgemeine Verkaufs- und Lieferbedingungen der ANGLO-PARTS Autoteile GmbH~ Wetzlar

1. Lieferungen durch uns erfolgen ausschließlich unter Zugrundelegung unserer nachfolgenden Verkaufs- und Lieferbedingungen. Bestellungen nehmen wir ausschließich

zu diesen Bedingungen an. Änderungen und Ergänzungen bedürfen der Schriftform. Andere Allgemeine Geschäftsbedingungen gelten auch dann nicht, wenn ihnen im

Einzelfall nicht ausdrücklich widersprochen wurde.

2. Wird eine Bestellung schriftl., mündlich oder auf andere weise getätigt, bleibt dem Besteller eine Frist von 7 Werktagen, um diese Bestellung zu wiederrrufen, sofern

noch keine Lieferung erfolgt ist. Nach Ablauf der 7-Tage Frist hat Anglo-Parts das Recht 30% des Bestellwertes dem Kunden zu berechnen oder 30% vom Wert eines

Vertrages zu berechnen. Der Kunde hat außerdem innerhalb einer Frist von 7 Werktagen, nach Erhalt der Ware, die möglichkeit die erhaltene Ware an Anglo-Parts

zurückzugeben (gemäß Punkt 9 “WICHTIGE AUSKÜNFTE”).

Der Versand unserer Ware erfolgt auf Gefahr und auf Kosten des Bestellers. Die tatsächliche Höhe der der Transport- und Verpackungskosten können nur berechnet werden,

nach der Zusammenstellung und Verpackung der Warensendung. (da Größen- und Gewichtsabhängig.)

3. Sofern der Versand nicht gegen Nachnahme erfolgt, sind Zahlungen rein netto innerhalb von 10 Tagen nach Rechnungserhalt zu leisten. Im Verzugsfall hat

der Besteller Verzugszinsen in Höhe von 3 % über dem jeweils geltenden Diskontsatz der Deutschen Bundesbank zu bezahlen. Die Geltendmachung eines weiteren

Verzugsschadens bleibt vorbehalten.

4. Der Besteller ist - sofern er Kaufmann ist - verpflichtet, unsere Ware unmittelbar nach Erhalt auf Mängel zu untersuchen und eventuelle Mängel unverzüglich, spätestens

innerhalb von 8 Tagen nach Erhalt der Ware - bei zunächst nicht erkennbaren Mängeln innerhalb von 8 Tagen nach deren Bekanntwerden - per Einschreiben bei uns geltend

zu machen. Bei offensichtlichen Mängeln trifft die vorgenannte Verpflichtung auch Nichtkaufleute. Werden berechtigte Mängel gerügt, sind wir lediglich zur Nachbesserung

bzw. zur Ersatzlieferung verpf!ichtet, allerdings erst, nachdem uns die von uns gelieferte Ware zur Verfügung gestellt worden ist. Wir behalten uns die Überprüfung etwa

gerügter Mängel durch den jeweiligen Hersteller vor und sind nicht zu Nachbesserungen oder Ersatzlieferungen verpflichtet, bevor dessen Prüfungsergebnis vorliegt. Nach

endgültig fehlgeschlagener Nachbesserung bzw. Ersatzlieferung ist der Besteller zur Wandelung oder Minderung berechtigt. Gewährleistungsansprüche entstehen nicht,

wenn der Fehler zurückzuführen ist auf Verletzung von Bedienungs-, Wartungs- und Einbauvorschriften, ungeeignete oder unsachgemäße Verwendung, fehlerhafte oder

nachlässige Behandlung und natürlichen Verschleiß sowie vom Besteller oder Dritten vorgenommenen Eingriffen in den Liefergegenstand sowie Schäden aus sportlichen

Einsätzen.

5. Schadenersatzanspruche des Bestellers - aus welchem Rechtsgrund auch immer - insbesondere der Ersatz für verspätete Auslieferung und mittelbare Schäden sind

ausgeschlossen. Dies gilt nicht, soweit uns Vorsatz oder grobe Fahrlässigkeit zur Last fällt.

6. Wir behalten uns das Eigentum an sämtlichen von uns gelieferten Waren bis zur restlosen Bezahlung sämtlicher Forderungen aus unserer Geschäftsbeziehung mit

dem Besteller vor. Veräußert der Besteller die gelieferte Ware weiter, so tritt er hiermit schon jetzt die ihm aus der Veraußerung entstehenden Forderungen gegen seinen

Abnehmer in voller Höhe an uns ab. Übersteigt der Wert unserer Sicherheiten gegen den Besteller (etwaige Eigentumsvorbehalte zuzüglich etwaiger Forderungsabtretungen)

unsere Forderung gegen den Besteller, so werden wir auf dessen Verlangen die Sicherheiten, die unsere Forderung übersteigen, freigeben.

7. Bei vom Besteller zu vertretender Falschbestellung ist ANGLO-PARTS bereit, unbeschädigte Artikel zurückzunehmen. Die Rücksendung erfolgt unter Beifügung

einer Rechnungskopie auf Kosten und Gefahr des Bestellers. Eine Rücksendung ist nicht mehr möglich 30 Tage nach dem Rechnungsdatum. Bei Ersatzteilen mit denen

ein Einbauversuch unternommen wurde, ist eine Rücksendung ebenfalls ausgeschlossen. ANGLO-PARTS erstattet den Rechnungsbetrag der zurückgesandten Ersatzteile

abzüglich einer Wiedereinlagerungsgebuhr von 15 % des Rechnungsbetrages.

8. Für Ersatzteile die auf Austauschbasis angeboten werden, wird der in der Preisliste neben dem Ersatzteilpreis angegebene Mehrkostenpreis berechnet. Dieser

Mehrkostenpreis wird ganz oder teilweise zurückerstattet, vorausgesetzt der Besteller übersendet auf eigene Kosten und Risiko unter Beifügung einer Rechnungskopie das

entsprechende alte Bauteil komplett, sauber und ölfrei innerhalb von zwei Monaten nach Rechnungsdatum. Bei Rücksendungen aus dem Ausland muß der Besteller eine

Bestätigung beifügen, aus der sein Name, Anschrift das Versendungsdatum sowie eine Beschreibung der Güter hervorgeht. Bei der Rücksendung eines falschen Bauteils

wird nur der jeweilige Stückwert erstattet. Insoweit führt ANGLO-PARTS eine Schätzung durch.

9. Ersatzteile die bei Erteilung des Auftrages nicht lieferbar sind, werden, wenn keine anderslautende Anweisung des Bestellers vorliegt, als Backorder behandelt. Bei

Eintritt der Lieferfähigkeit wird der Besteller in Kenntnis gesetzt. Die entsprechenden Ersatzteile werden für einen Zeitraum von 14 Tagen nach Absendung der Bestätigung

für den Besteller reserviert. Backorders können jederzeit vom Besteller annulliert werden.

10. Als Erfüllungsort fur die Lieferung und Zahlung sowie als Gerichtsstand gilt - sofern der Besteller Kaufmann ist - Wetzlar als vereinbart Darüberhinaus gilt ausschließlich

das Recht der Bundesrepublik Deutschland. Das Übereinkommen der Vereinten Nationen vom 11.04.1980 uber Verträge über den internationalen Warenkauf findet keine

Anwendung.

11 Sollte eine Bestimmung dieser Bedingungen und der von uns mit dem Besteller getroffenen weiteren Vereinbarungen unwirksam sein oder werden, so wird dadurch

die Gültigkeit des Vertrages im übrigen nicht berührt. Die Vertragspartner sind verpflichtet, die unwirksame Bestimmung durch eine solche zu ersetzen, mit der der

wirtschaftliche Erfolg der unwirksamen Bestimmung möglichst erreicht wird. Sollten sich aus diesen Allgemeine Verkaufs- und Lieferbedingungen und den Allgemeinen

Informationen Wiedersprüche ergeben, genießen diese Allgemeine Verkaufs und Lieferbedingungen Vorrang.

12. Hinweis gemäß § 33 BDSG: Name und Anschrift des Auftraggebers sowie alle für die Auftragsabwicklung erfoderlichen persönlichen Daten werden ausschließlich

für eigenen geschäftlichen Zwecke in automatisierten Dateien gespeichert und Dritten nicht zugänglich gemacht.

© V a n G e s t e l B & C 2 0 0 2

6

INFORMAZIONI IMPORTANTILe condizioni di vendita sono stampate sul retro delle fatture, all’interno dei cataloghi e nei listini prezzi. Se si ordina da noi, il cliente accetta e condivide le nostre condizioni di vendita. Prima di effettuare un ordine siete pregati di leggere attentamente i punti seguenti.

I NOSTRI VENDITORINon sono dei tecnici perciò non sono responsabili di eventuali errori, si consiglia sempre il consulto di un meccanico esperto, se si hanno delle difficoltà, oppure consultare i libri tecnici presenti nei nostri cataloghi. I nostri venditori sono comunque entusiasti di poterla aiutare in ogni modo possibile.

I CATALOGHICi impegniamo da sempre affinché le informazioni presenti all’interno dei nostri cataloghi siano il più possibile corrette; quindi, non siamo responsabili di eventuali imprecisazioni o mancanze sulla descrizione, sul prezzo o sui numeri di codice dei ricambi. Per questo ci riserviamo il diritto di apportare le correzioni necessarie senza preavviso.Le illustrazioni degli articoli sono solo indicative, perciò, possono esserci delle piccole differenze per quanto riguarda la forma, ma la qualità e l’utilizzo restano le medesime.La quantità (QT) scritta affianco al codice articolo si riferisce alla quantità necessaria al restauro di una singola auto; tutti i prezzi si riferiscono alla quantità singola, perciò sono da moltiplicare sempre per la quantità scritta accanto all’articolo; è comunque possibile ordinare la quantità desiderata.I ricambi che non sono disponibili, non sono presenti nei listini prezzi oppure sono marcati NA. Talvolta è comunque possibile trovarli di seconda mano. I prezzi dei nostri ricambi possono cambiare improvvisamente e senza preavviso, dipende dei prezzi di acquisto presso i nostri fornitori. I nostri listini sono I.V.A. compresa. Normalmente tutti i codici si riferiscono all’articolo NUOVO. Talvolta sono presenti delle eccezioni, come: SH: ricambio d’occasione/seconda mano. EX: si tratta di materiale revisionato, per il quale serve il reso del vecchio, altrimenti si deve pagare un sovrapprezzo. NA: Non disponibile. LH: sinistro. RH: destro ( visti dal punto di vista del guidatore). LHD: guida a sinistra. RHD: guida a destra.- A/R: a richiesta (la quantità può variare a seconda dell’applicazione). USE: il numero di articolo è stato sostituito dal numero indicato.

ORDINIAccettiamo ordini via fax, telefono, e-mail, a mezzo posta, internet oppure in negozio; nel caso utilizzate il nostro modulo d’ordine, tenete presente quanto segue: - indicare sempre il vostro codice Cliente (solo se siete già clienti), il nome, l’indirizzo, il numero di telefono, il codice fiscale o il numero di partita I.V.A. per le Ditte; - specificare l’indirizzo per la consegna nel caso fosse diverso da quello di fatturazione; - completare i dati identificativi della vostra vettura: marca, tipo, anno di costruzione, ecc. - usare soprattutto i nostri codici articolo; ciò rende più facile e sicura l’evasione del vostro ordine. - indicare sempre la quantità a voi necessaria e scrivete la descrizione dei ricambi. - indicare la modalità di pagamento; se prevedete l’uso di carta VISA, MASTERCARD, inserite il codice completo (16 cifre), la scadenza e il badge code. Tutti questi dati sensibili vengono inseriti nel nostro sistema computerizzato per la corretta evasione dell’ordine; modificare un ordine già inviato provoca grave disordine nei nostri sistemi causando la possibilità di sbagliare e ritardare l’evasione dell’ordine stesso. Perciò vi chiediamo di controllare bene tutti i dati prima di trasmetterli: ci aiuterà a fornirvi i ricambi nei modi e nei tempi corretti. Certi della vostra collaborazione vi ringraziamo.

PAGAMENTICarta di credito: al momento, accettiamo esclusivamente carta di credito del circuito VISA, MASTERCARD. Siete pregati di indicare correttamente il numero di 16 cifre, la scadenza, il badge code ed il nome del “titolare” della carta.Bonifico Bancario: Vi invieremo, via fax o via mail, la copia della fattura, quindi provvederete a fare il bonifico immediatamente inviandoci copia dello stesso, sarà nostra premura spedire il materiale non appena arrivato il pagamento.Contrassegno: Pagamento in CONTANTI o assegno circolare al corriere. Solo su nostra autorizzazione potete lasciare un assegno bancario.

SPEDIZIONEEffettuiamo solo spedizioni Nazionali, utilizzando il corriere espresso. La consegna viene effettuata in 24h/48h. I costi del trasporto e dell’imballaggio vengono conteggiati in fattura, essi variano in base al volume del pacco. Il contrassegno prevede un costo aggiuntivo per i diritti d’incasso del corriere. Cerchiamo di imballare il materiale nel modo migliore al fine di evitare rotture o danni: tuttavia, nel caso dovesse succedere, Anglo Parts SRL non si ritiene responsabile di spedizioni danneggiate o perse durante il trasporto. Il cliente dovrà dare comunicazione scritta entro tre giorni dal ricevimento della merce. Nel caso di problemi, tutto il materiale di imballaggio deve essere conservato per l’eventuale verifica. Il materiale fragile (parabrezza,parti in vetro,etc) viene da noi assicurato.

RICEVIMENTO DELLA MERCESiete pregati di verificare, al ricevimento della merce, che i sigilli, il nastro adesivo e la confezione non siano rotti o manomessi. In caso di danneggiamento o perdita del materiale: firmate con riserva al corriere, conservate la copia del documento di trasporto/fattura, presentate immediatamente un reclamo al trasportatore e metteteci a conoscenza dell’accaduto. Conservate in ogni caso l’imballo finché i problemi non saranno stati risolti. Verificate immediatamente se avete ricevuto tutto il materiale ordinato e se tutti i pezzi meccanici funzionano. Non aspettate di verificare i pezzi al momento del montaggio e, in caso di difetti o errori, scriveteci entro tre giorni dal ricevimento della merce.

GARANZIAAnglo Parts si impegna a comprare solo dai fornitori migliori, controllando nel limite del possibile tutti i ricambi, ma talvolta vi consigliamo di fare un ultimo controllo prima del montaggio. Soprattutto bisogna verificare che i pezzi meccanici siano in perfetto stato. Il periodo di garanzia inizia dalla data di fatturazione e non dalla data del montaggio. I nostri ricambi hanno una garanzia limitata al valore del pezzo, quindi eventuali reclami comportano solo la sostituzione del pezzo difettoso o la restituzione del solo valore dell’articolo. La Garanzia non copre i costi del montaggio, del trasporto, di danni conseguenti al difetto del pezzo, di un montaggio scorretto e di pezzi che vengono usati per competizioni o rally. Nel caso di reclami coperti da garanzia, i pezzi devono essere restituiti al negozio; a tal proposito tenete presente che: il valore deve essere maggiore di 7,5 Euro, tutti i pezzi devono essere rispediti puliti e ben imballati. Una volta ricevuti i pezzi Anglo Parts SRL verifica se si tratta di un difetto di fabbrica oppure se è dovuto ad un montaggio scorretto. I pezzi danneggiati dal trasporto o nell’imballo non vengono presi in considerazione.

RISPEDIZIONEAccettiamo resi di materiale, solo se autorizzati, entro e non oltre 10 giorni dal ricevimento della merce. Se la restituzione è dovuta ad un errore di ordinazione da parte vostra, viene detratto dal costo dell’articolo il 15%, quale copertura di costi generali (valore minimo articolo 7,5Euro).Non vengono accettati resi di materiale che siano stati anche parzialmente montati! I costi del trasporto e dell’imballaggio non vengono MAI restituiti.

SUPPLEMENTOAlcuni ricambi vengono forniti rigenerati (rebuilt), in essi grava un sovrapprezzo (surcharge); questo sovrapprezzo verrà restituito solo dopo aver ricevuto il vecchio ricambio. Al ricevimento da parte nostra dei pezzi verificheremo immediatamente se è possibile riaccreditare il sovrapprezzo da voi pagato. La spedizione del vecchio ricambio è a carico vostro.

BACKORDERS / ORDINI ARRETRATII prodotti che non abbiamo disponibili al momento dell’ordine, vengono messi in “backorder”; Ciò significa che non appena il ricambio sarà disponibile presso la nostra sede, provvederemo a comunicarvelo a mezzo posta. Tale ricambio viene tenuto in prenotazione per voi per una durata di 15 giorni a partire dal giorno di spedizione della lettera postale da parte nostra. NEL CASO NON RICEVESSIMO vostre notizie entro questo tempo, il pezzo potrà essere venduto a qualsiasi altro cliente. Se ordinate tramite modulo d’ordine o tramite internet potrete specificare se vorrete o meno ricevere gli articoli non evasi. Nel caso un pezzo in “backorder” non fosse più disponibile, vi verrà comunicato.

Informazioni importante

7© V a n G e s t e l B & C 2 0 0 2

How to read and use the part number lists

ILL n°. Part n°. QTY DESCRIPTIONillustration number Part number Quantity required Part description

Illustration numberExceptions: If a part has no illustration number it is because there are several kinds of the part in question.e.g. Left and right hand door panel.

Part numberExceptions: A part number may be missing if the part is no longer obtainable or in production.

Necessary quantity:ATTENTION: indicated here is the quantity of units necessary and not the quantity of units which are supplied per order/delivery. Our parts are sold per unit.

Part descriptionWith dimensions of screws, bolts, cables, etc. Information about carburetters, electricity etc., details about books giving more information about the part itself: original, reproduction, reconditioned, etc.

Illustratie nummerUitzonderingen: Een onderdeel heeft geen Illustratie nr. omdat er meerdere soorten van het bestaande stuk zijn. vb. Links en rechts deurpaneel

OnderdeelnummerUitzonderingen: Een onderdeel-n u m m e r k a n o n b r e k e n waarneer dit stuk niet meer te verkrijgen of in produktie is.

Nodige HoeveelheidLET OP: Hier wordt de hoeveelheid stuks die nodig zijn vermeld en niet de hoeveelheid stuks die worden geleverd bij bestell ingen. Onze onderdelen worden verkocht per stuk.

Onderdeel beschrijvingMet maten van schroeven, bouten, kabels enz. Informatie over carburateurs, elektriciteit enz. Details over boeken die meer informatie geven. Informatie over het onderdeel zelf: origineel, reproduktie, gerestaureerd enz.

Numéro illustrationExceptions: Si une pièce détachée ne comporte pas de numéro d’illustration, c’est que la pièce existe en plusieurs versions.Exemple: Panneau de porte gauche - droite.

Numéro de la pièceExceptions: Si ce numéro n’est pas indiqué, c’est parce que cette pièce n’estplus disponible ou qu’e l le n’est p lus en production.

Quantité nécessaire:ATTENTION: Sous cette rubrique, on mentionne la quantité de pièces qu’il faut et non la quantité de pièces livrées lors de la commande. Nos pièces détachées se vendent à l’unité.

Description de la pièce:Comporte les dimensions des vis, écrous, câbles etc. Des reseignements au sujet de carburateurs, électricité etc., des détails concernant des livres informatifs. Des renseignements au sujet de la pièce même: pièce d’origine, reproduction, pièce révisée etc.

Abbildungsnummer:Ausnahmefall: Wenn ein Einzelteil keine Abbildungs-nummer hat, ist das, weil der Einzelteil in mehreren Fassungen besteht.Beispiel: Linke - rechte Türfläche.

Nummer des Ersatzteils:Ausnahmefall: Mangelt diese Nummer, dann ist dieser Einzelteil nicht mehr verfügbar oder wird er nicht mehr hergestellt.

Benötigte Menge:Achtung! Unter diesem Titel wird die Menge der benötigten Einzelteile angegeben, sondern nicht die Menge der bei Bestellungen gelieferten Einzelteile. Unsere Einzelteile werden stückweise verkauft.

Beschreibung des ErsatzteilsBetrifft die Abmessungen der Schrauben, Mutter, Kabel, usw.; Auskünfte über Vergaser, Elektrizität, usw. Einzelheiten über Info-Bücher, Auskünfte über den Einzelteil selbst: Originaleinzelteil, Reproduction, überholter Einzelteil usw.

Numero illustrazioneEccezioni: Un componente non ha un numero il lustrazione perchè ci sono vari tipi del pezzo esistente.P. es. Pannello porta destro e sinistro.

Numero componenteEccezioni: Può succedere che non c’è un numero componente quando il pezzo non è più disponibile o quando non è più

in produzione.Quantità necessariaAVVERTENZA: La quantità di pezzi necessari è data, e non la quantità di pezzi consegnati dopo ordinazioni. I nostri componenti vengono venduti

al pezzo.Descrizioni componentiCon misure di vite, bulloni, cavi ecc. Informazione su carburatori, elettricità ecc. dettagli su libri che danno ulteriore informazione. Informazione sul componente stesso: originale, riproduzione, revisionato ecc.

GB

D

F

NL

I

© V a n G e s t e l B & C 2 0 0 2

8

Ordering information

9© V a n G e s t e l B & C 2 0 0 2

Wire wheel balancing

How to balance centrelock wire wheels

The diagrams show the centre spline of a wire wheel attatched to a balancer.Diagram A is the correct method of locating the wheel.Diagram B shows the wrong method.

(1) Balancer lock nut(2) Splined hub(3) Sprung cone(4) Mounting face of balancer(5) Locate only at these external points(6) Locate only at these points(7) Do not locate at these internal points(8) Do not locate at these points(9) Inner cone with distance piece

POINTS TO CHECKThe original high degree of balance may be affected by wheel damage as well as by factors related to the tyres uneven tread wear, cover or tube repairs etc. If roughness or high speed steering trouble develop, and this cause is not disclosed by mechanical investigation, then the complete tyre and wheel assembly should be checked for balance.

It is IMPERITIVE that the hubs are located on the balancing machine in exactly the same manner as located on the car and the factory truing jigs. Alternatively, balance on the vehicle, this operation can only be done on the front wheels of your car.

Das Auswuchten von Speichen- rädern mit zentral Verschluss.

Die abbildungen zeigen die Nabe eines ZV-Speichen-rades auf einer Auswuchtmaschine montiert.Abbildung A: Die richtige Montage. (Nabenteller berührungsfrei, außen sitzender Außenkonus ) .Abbildung B: Hier ist die Nabe falsch montiert!

(1) Außen übergreifender Wuchtkonus(2) Speicherad-Nabe(3) Innenkonus mit Distanzstück “i”(4) Anlageplatte der Wuchtmaschine(5) Hier über Original-Außenkonus spannen(6) Hier über Original-Innenkonus spannen(7) Nicht über Innenkonus führen(8) Der Nabenteller darf die Anlageplatte nicht berühen!(9) Distanzstück, zur Verhinderung von Punkt “H”

Überprüfungspunkte: (Hinweise)der ursprünglich gute Rundlauf eines Rades kann sowohl durch eine Beschädigung des Rades als auch durch unleichmäßige Reifenabnutzung, Schlauchreparaturen oder ungenau gefertigte Neureifen etc. beeinträchtigt werden. Wenn vibrationen auftreten, deren Ursache nicht zweifelsfrei in der Mechanik liegen, solte das komplette Rad mit reifen ausgewuchtet werden.

Es ist absolut unumgänglich, dab die Râder auf der Wuchtmaschine genauso gespannt werden wie am Wagen selbst. Bei Bedarf sind die erforderlichen Spannwerkzeuge über MWS zu bezichen. Alternativ ist es möglich, die Räder elektronisch am Wagen zu wuchten, was jedoch nur an nicht angetriebenen Achsen möglich ist.

COMMENT EQUILIBRERDES ROUES A RAYONS

Le dessin montre le moyeu d’une roue fixée sur une équilibreuse.LE SCHEMA A indique la méthode de fixation correcte.LE SCHEMA B indique une fixation incorrecte.

(1) Equilibreuse, écrou de vérouillage(2) Moyeux(3) Cone ressort(4) Montage Avant de l’équilibreuse(5) Placer seulement sur ces points exterieurs(6) Placer seulement sur ces points(7) Ne pas placer sur ces points interieurs(8) Ne pas placer sur ces points(9) ecartement afin d’éviter le contact sur point

LES POINTS A OBSERVER ET VERIFIER:La précision de l’équilibrage peut être affectée par une jante détériorée aussi bien que par des pneus usés ou des tubeless reparés, etc. Si la direction devient dure ou représente des troubles à grande vitesse, et, où après verification, la cause n’est pas mécanique, il convient de verifier l’équilibrage de la roue.

IL EST IMPERATIF de respecter le schema A lors de l’installation sur l’équilibreuse. On peut aussi équilibrer les roues avants seulement sur le vehicule, à l’aide d’un appareil adapte. Pour tous renseignements complementaires n’hésitez pas à contacter

GB D

COME BILANCIARERUOTE A RAGGI

Il disegno mostra il mozzo d’una ruota fissata su una macchina da bilanciare.LO SCHEMA A indica il metodo corretto di fissare una ruota.LO SCHEMA B mostra il metodo scorretto !

(1) Un dado di fermo(2) Mozzo(3) Pezzo conico sporgente(4) Disco di montaggio della macchina da bilanciare(5) Mettere soltanto sui punti esteriori(6) Mettere soltanto su questi punti(7) Non mettere su questi punti interiori(8) Non mettere su questi punti(9) Separazione per evitare il contatto con il punto

La precisione del bilanciare diventa meno sicura a causa di un cerchione danneggiato, di pneumatici usati o di gomme riparate, etc. Se la conduzione diventa difficile o presenta dei problemi a grande velocità e, doppo la verifica mecanica, la causa non è questa, è necessario verificare il bilanciare della ruota. È necessario rispettare lo schema A durante l’instalazione sulla macchina da bilanciare. Si può bilanciare soltanto le ruote anteriori sulla macchina, per mettere di un apparecchio adatto.

F NL IHet uitbalanceren van een “centre lock” spaakvelg

Illustraties:SCHEMA A Dit is de juiste wijze van balanceren.SCHEMA B Op deze foute wijze krijgt men afwijkende meet gegevens.

(1) Balanceer moer(2) Spaakvelg(3) Binnencone met afstandstuk(4) Montage plaat van balanceer apparaat(5) Centreren op deze binnenste punten(6) Op deze punten centreren(7) Niet centreren op deze binnenste punten(8) Niet op deze punten centreren(9) Binnencone met afstandstuk

Belangerijk is de wijze waarop de spaakvelg op het balanceer apparaat opgespannen wordt. Zie illustratie A en B.

In verband met de garantie wordt aanbevolen de spaakvelg zonder band op het balanceer apparaat op te spannen en na te zien of de velg in balans is. De afwijking wordt gemeten vanaf de rand waar de band tegen komt te liggen met maximaal 2 millimeter afwijking. Als deze afwijking minder is, dan kan de band op de spaakvelg gemonteerd worden en het geheel uitgebalanceerd worden.

© V a n G e s t e l B & C 2 0 0 2

10

Production dates, car nrs. and major changing points

Model car nr. ID code prod. date Changes

TR5 CP2 < CP586 A 1967 Injection

TR5 CP586, < CP3101 A 1968 injection

TR250 CD1, A 1967 USA market only!

Carburettor

TR250 CD2685L, < CD8594L, A 1968 Nose striping

bigger flashers

TR6 > CC25003L, B 1968 New body design byKarmann Ghia, Carburettor

TR6 > CP25146 B 1968 Injection

TR6 CC27384L < CC32142L B 1969 Carburettor

TR6 CP25159 < CP26998 B 1969 Injection

TR6 CP50465 < CP52786, C 1970 Injection

TR6 CC51033L > CC58298L C 1970 Carburettor

TR6 CP52786 > CP54572 C 1971 Injection

TR6 CC60903L > CC67893L C 1971 Carburettor

TR6 CP75455 > CP77718, D 1972 Injection

TR6 CC78813U > CC85737U D 1972 Carburettor

1973 ‘J’ type overdrive

CR665, > CR9211 E 1973 Injection

TR6 CF4029U, > CF11572U E 1973 Carburettor

1974 Lower bumper,

rubber overriders

TR6 CF17002U > CF25777U F 1974 Injection

TR6 CR5613, > CR6630 F 1974 Carburettor

TR6 1975 Flasher under raised bumper

TR6 CR6631, > CR6701 G 1975 Last injection

TR6 CF29581U, > CF31416U, G 1975 Carburettor

TR6 CF35002U, > CF39991U, H 1975 Carburettor

TR6 CF52315U, > CF58328U, I 1976 Carburettor

11© V a n G e s t e l B & C 2 0 0 2

Location of serial numbersThe commission number:Is the identification number wich is required for registration and other purposes. It is stamped on a plate attached to the left hand front wheel arch (except USA) and is visible when the bonnet is raised. On cars for the USA markets this plate is attached to the left hand door striker plate (‘B’post) and the commission number is also stamped on a small plate visible through the left hand side of the windscreen.

The significance of the commission numbers and suffix is as follows;CP/CR this prefix denotes ‘TR6’model range and that a petrol injection engine unit is fitted.CC/CF is an alternative prefix denoting model range and that a carburettor engine unit is fitted.1234 is the accummulated total build of this model. L denotes left hand steering. U denotes USA type markets 1972 condition. The commission number plate also bears code symbols for identification of the vehicle’s colour, trim material and trim colour. Refer to ’ORIGINAL TR’ part nr.190539

The engine number:Is stamped on a machined flange on the left hand side of the engine. The significance of the engine numbers, and suffix is as follows; CP/CR this prefix denotes model range and that the engine unit is fitted with petrol injection. CC/CF is an alternative prefix denoting model range and that the engine unit is fitted with carburettors. 1234 is the accumulated total build of the type. H denotes high compression, alternatively. L denotes low compression, alternatively. U denotes USA type markets 1972 condition. E denotes engine unit.

The gearbox number:Is stamped on the left hand side of the gearbox casing. The signifiance of the gearbox numbers is as

follows; CD this prefix denotes model range. 1234 is the accumulated build of this type.There are no suffix letters.

The rear axle number:Is stamped on the bottem flange of the axle housing. The significance of the axle numbers is as follows;CP/CR this prefix denotes model range and that the axle unit is for use with petrol injection engines.CD an alternative prefix denoting model range and that the axle unit is for use with carburettor engines1234 is the accumulated build of the type . There are no suffix numbers.

© V a n G e s t e l B & C 2 0 0 2

12

TR5-TR2501967-1971

TR6 1969Europ

TR6Early USA

TR6 ‘74USA

TR6 1969-’74Europ

1973-’74 Europ1974-’76 USA

Key to identification numbers and model identification

To CC 75000 / ‘69-’72

Lager hole for hazard switch/early ‘72

With one warning lamp late ‘72

With two warning lamps late ‘73-’75

With three warning lamps late ‘75-’76

Europ 1969-’76USA 1969-’73

USA 1973-’75

USA 1975-’76

Center BarFour types

Europ 1969-’73USA 1969-’73

Europ 1963-’76USA 1973

USA 1974CF 12500 - CF 27000

USA 1975-’76CF 27001 on

Up to CF 12500CR 5000

13© V a n G e s t e l B & C 2 0 0 2

More useful identification data

TR5 - 250 1967-1968

TR6 1969

TR5 - 250 1970-1972

TR6 1973

TR6 1974-76

Up to 1973 Chrome wiper arms

From 1973 Black wiper arms

Europe

USAFrom 1973

On front wings from 1972

© V a n G e s t e l B & C 2 0 0 2

14 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

AAccelerator cable 39Accelerator pedal 39, 43Adjustable cam sprocket 131Adjuster, rear brakes 71Adjusting tool, carbu 34Air pump 25Air duct 30Air filter 27, 16Air injection 43Air pump 43Alfin brake drum 140Alloy radiator 134Alloy water pump pulley 134Alloy wheels 146Allu rocker cover 130Alternator 77Alternator, mountings 25Ampmeter 154Angle drive 49, 50, 86Antenna 153Anti run-on valve 44, 47Antifreeze 30, 175Anti-roll bar 65Assembly lube 131Autoglym products 147, 171Axle shaft 58

BB post finisher 109Badge bar 162Badge, TR5 101Badges 162Badges, TR6 109Ball joint 66Ball joint seperator 181Battery cable 74Battery charger 170Battery conditioner 170Battery liner 160Battery switch 74, 152, 170Battery tray 74Battery 74Battery, sealed 170Bearing kit, front 65Bearing, connection rod 17Bending tool 181Blanket 167Body mounting kit 95Body panels TR5 96-98Body panels, TR6 104, 106Bodyshell 104Bonnet cable 99, 107Bonnet TR5 98Books 184, 187Boot carpet 127Boot lamp 83Boot panels 127Bottle, overflow 30Braided hoses 72Brake caliper 70Brake disc 70Brake drum 71Brake fluid 69, 176Brake hoses 72Brake improvements 140Brake light switch 69Brake pads 70Brake pedal 69

B continuedBrake pipe set 72Brake pump 69Brakes, front 70Brakes, rear 71Breather system 44Brush, horn push 63Brush, wire wheels 68Buffer, bonnet 99Bugatti cap 167Bulb kit 80, 81Bumpers, TR5 102Bumpers, TR6 110

CCam follower 21Cam kit 131Camshaft 17Cap 167Car covers 178Carbon cannister 46, 47Carburettor oil 34, 125Carburettor parts 34Carburettor synchro 135Carpet fasteners 129Carpet set 126Castrol cleaner 176Chamois 171Chassis 94Check strap 114Choke cable 39, 87 89Chrome blanking plug 158Clock 154Clutch centering tool 181Clutch components 48Clutch hoses 72Clutch pedal 48Clutch tool 48Coil spring 65Coil 16, 32Colortune 180Colours and codes 128Competition lamps 148Competition seat belts 151Condensor 16, 32Connection rod 17Connolly products 171Contact set 16, 32Copper grease 61, 66, 144Copper hammer 68Core plug kit 16Core plugs 18Cowl, steering column 64Crankshaft 17Crash pads 85Crown wheel&pinion 59Cylinder head 16

DDamper oil, carburettor 34Dash knob set 87, 89Dash support console 92Dash top 85Dashboard 84Decal set 64Decal, TR6 109Differential 59Dip switch 78Dipstick 20

D continuedDirection switch 64Distributer cap 16, 32Distributor, rebuild 32Door cappings 125Door glass 115Door handle 114Door handle, interior 114Door lock 114Door seal 125Door steps 158Drip pan 174Drivers handbook 186Driveshaft 58

EEGR valve 44Engine breather 130Engine cleaner 171Engine mountings 16Engine mountings 24Engine paint 18Evaporative loss syst. 46, 47Exhaust system 28Exhaust manifold 27Exhaust valve 22

FFacet fuel pump 138Fan belt 16, 31Fan, waterpump 31Fast road camshaft 131Felt 129Fertan 177Filler cap 21, 33, 36, 38Fire extinguisher 170First aid kit 170Flasher box 78Flasher lamp 80, 82Flying jacket 166Flywheel 17Fog lamp 79, 149Foot mats 150Front bumper, TR6 110Front suspension 65Front wing TR5 98Fuel pump PI 36, 38, 42Fuel filler cap 33, 36Fuel filter PI 36, 38, 42Fuel filter 36, 38, 138Fuel pipes 33, 38Fuel pressure regulator 138Fuel pump 33Fuel tank 33, 36, 38Fuse box 78

GGas analyzer 180Gasket set, body 100Gasket set, carburettor 34Gasket set, engine 16 Gasket set, gearbox 49Gasket set, overdrive 53, 55Gear lever gaiter 126Gear lever knob 49, 156Gearbox cover 127Gearbox mountings 16, 24Gearbox oil 49Gearbox 49, 50, 52

G continuedGlazing rubber, front 116Glove box lamp 83Glove box, switch 84Gloves 167Glue 123, 126, 177Goggles 166Graphite grease 66Grease pump 58, 175Grease, cartridge 175Green pads 140Grill, TR6 107Grille, TR5 99Grommet kit, firewall 74Grommet kits, TR5 103Grommet kits, TR6 118

HHandbrake cover 126Handbrake 71Handle, hood 119Handle, window 115Hard top 122Hardura 129Hardware kit, distributor 32Hardware kit, exhaust 28Hardware kit, manifold 22Hardware kit, timing 20Hazard box 78Hazard switch 87Head gasket set 22Header rail 119Headlamp 79Heat reduction products 139Heater installation 93Heater valve 22Heater, motor 93Helmet, leather 166Hinge, door 114Hood cover 120Hood frame 119Hood 119Hood, webbing 119Hook, spare wheel 105Horn 91HT lead set 32Hub assembly 58Hub, front 65Hydra blade 171

IIgnition switch 87Ignition system 32Improved pump PI 42In line fuse 74Inertia switch 42Injectors 41Inlet maniflold, PI 26Inlet manifold, carburettor 25Inlet valve 22Instruments dashboard 86, 88Instruments 154Insulations felt 129Interior lamp 83Interior mirror 117

JJack 68Jet&bush kit 91

Index

15© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

KK&N products 135Kenlow fan kit 30, 134Key fobs 169King filter 138Kryptonite 159

LLead replacement 172Lead set 16Leyland badge 109Lighting switch 64Loctite products 176Lucas sticker 32, 74Luggage rack 100, 108, 159Lumenition 133Luster lace polish 147

MMagnetic drain plug 132Magnetronic ignition 133Main bearing set 17Map reading light 153Medaillon, TR5 101Mesh 160Metering unit 41Millers oil 174Millia helmet 166Mintex brake pads 140Mirrors 101, 109, 163, 165Model, TR6 187Moto-Lita steering 155Moulding, sill 109Mouldings, TR5 101Mud flaps 160

NNGK spark plugs 133Number plate lamp 83

OOil capacities 20Oil cooler 23, 132Oil feed kit 22Oil filter 16, 23Oil pressure switch 16, 86, 88Oil pressure valve 18Oil pump 20Oil seal, engine 18Oil seal, gearbox 49Oil thermostat 23Oil 16, 20, 173, 175Overdrive controls 57Overdrive conversions 57Overdrive switch 64Overdrive, A-type 53Overdrive, J-type 55Overrider 102

PPaint 128Panel clips 125Panel kits 125Pedal pad 69Petrol filler cap 33Picnic basket 167Picnic blanket 167Piston liner 17Piston rings 17Piston set 17Plinth, switches 85

P continuedPolyurethane bushes 141Pourer, Castrol oil 175Pressure differential ass 72Propshaft 58Pulley, crankshaft 17Punch&bed kit 119, 129Push rod 21

RRacing mirror 164Radiator cap 30Radiator duct 161Radiator hoses 30Radiator 30Rain-X 177Rear axle 59Rear bumper, TR6 112Rear fog lamp 149Rear lamps 83Rear wing TR5 98Rebuilding kit, carburettor 34Rebushing kit front 66Reclining seat 150Reflector triangle 170Relay, horn 91Relays 78Release bearing 48Relief valve 36, 38, 42 Remote conrol, door 114Retro trip 152Return spring, pedal 69Reverse lamp 81Revolving tool 119Rheostat switch 87Rim, headlamp 79Rivet tool 183Rocker arm 21Rocker cover, allu 21Rocker feed kit 132Rocker shaft 21Roll bar 153Roller rocker 21, 130Rotor 16, 32Rubber grease 69, 70, 71Rubber mats 150

SSafety catch 107Scarves 167Screw kits 179Screw set 23Screwdriver 183Seat belts 151Seat covers 123Seat foams 123Sending unit, fuel 33Separator tool 62Service interval counter 88Service kit, carburettor 34Servo 69Shock absorber front 65 Shock absorber oil 143Shock absorber rear 67Shock oil 67Side lamp 80Sign board 169Silicone brake fluid 176Silicone spray 61, 147, 176Sill 105Socket set 183

S continuedSolenoid, overdrive 53, 55Sound deadening kit 126Spanner set 183Spare bulb kit 82, 83Spare wheel cover 127Spark plug spanner 68Spark plug 16, 22, 32Speedo cable 86, 88Speedometer 86, 88Spigot bearing 16, 17Spin on conversion filter 23Spinner, wire wheels 61Spin-on filter conversion 132Splash plate 96Spoke spanner 68, 144Sport coil 133Sport exhaust system 29Spotwell mill 183Starter cable 74, 170Starter motor 76, 133Starter ring 17Starter solenoid 78Steering column 63Steering lock&switch 64Steering rack 62Steering wheels 63Steering, quick rack 142Stop&tail lamps 81, 83SU conversion 135Su tools 180Sun visors 117Surrey top 121, 153Suspension improvement 143Swich interior light 78Synchro ring 51

TTacho cable 86, 88Tachometer 86, 88Tank unit 36, 38Tap drain 19Tap&Die set 183Telescopic rear damper 67Temperature transmittor 16Tensioner, chain 20Textil TR 169Thermostat housing 31Thermostat 16, 31Threshold plate 101Throttle linkage PI 40Timing chain 20Timing cover 20Timing disc 131Tipping valve 69Tonneau cover 120Tool roll 68Tools 180, 183Tools, original 68Track rod 62Trailing arm, rear 67Transmission oil 60Tripmasters 152Triumph parking only 169Trunion, suspension 66Tuning info 20Tunnel cover 97, 126Tunnel panels 125Tyre pressure gauge 147Tyre pump 170Tyre tube 61

T continuedTyre valve tool 68Tyre 146

UUnder dash liner 161Under felt kit 126Union jack parts 168Universal joint 58Uprated cam followers 131Uprated vale springs 130Uprated valve, shock 143

VVacuum hose 69Vacuum system 45Vacuum unit 32Valve caps 147Valve seat insert 22Valve spring lifter 181Valve spring set 22Valve, heater 93Vent grille 108Vertical link 65Vizibleed bleeder 71Voltage stabiliser 78, 86Voltmeter 154VSP, lead replacement 172

WWalnut dashboard 157Warning lights 79, 152Wash handshoe 171Washer bottle 91Washer switch 87Water pump 31Water return pipe 31Water wetter 31, 134, 176Waxoyl 177Weather strip 115Webbing, seats 123Weber conversion 136Wheel cylinder 71Wheel nut 58, 61Wheel wrench 144, 182Wheelbox 90Wheels 61Wind deflector 160Window regulator 115Windscreen capping 116Windscreen cleaner 177Windscreen washer 91Windscreen, glass 116Wing beading 101Wing cover 178Wing deflectors 161Wing fixing kit 98Wiper arm 90Wiper blade 90Wiper motor 90Wiper switch 87Wire wheel brush 182Wire wheel conversion 144Wire wheel hubs 61Wire wheels 61, 145Wiring loom 75Wooden wheel wrench 182Workshop manuel 184Wringer, chamois 171

Index

© V a n G e s t e l B & C 2 0 0 2

16 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

016.21216 mm between ports

Engine, most important parts

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 012.370 1 Cylinder head, lead free, 9.5:1 comp P.I. up to CP75000 012.880 1 Cylinder head, lead free, 9.5:1 comp P.I. CP75001 up to CR5000 012.881 1 Cylinder head, lead free, 9.5:1 comp P.I. CR5001 on 012.882 1 Cylinder head, lead free, 8.6:1 comp Carb. up to CC75000 012.883 1 Cylinder head, lead free, 7.75:1 comp Carb. CC75001 up to CF12500 012.884 1 Cylinder head, lead free, 7.5:1 comp Carb. CF12501 on 2 017.051 1 Core plug set For both head and block 3 016.377 1 Head gasket set, 1967-’71 P.I. up to CP75000 016.200 1 Head gasket set, 1971-’74 P.I. CP75001 on 016.198 1 Head gasket set, 1967-’72 Carb. up to CC75000 016.199 1 Head gasket set, 1972-’75 Carb. CC75001 on 4 016.089 1 Gasket thermostat 5 016.182 1 Gasket rocker cover 6 016.211 1 Gasket manifold, P.I. models & 24 mm between ports Carb. CC75001 on 7 016.212 1 Gasket manifold, Carb. up to CC75000 16 mm between ports 8 011.158 1 Spigot bearing- in crankshaft- 1" x 1" P.I. up to CP50000 & Carb. up to CC50000 011.414 1 Spigot bearing- in flywheel- 1" x 1/2" P.I. CP50001 on & Carb. CC50001 on 9 011.153 2 Engine mounting 10 011.152 1 Gearbox mounting Standard & A-type overdrive 11 011.154 2 Gearbox mounting J-type overdrive 12 012.013 1 Thermostat, 72°C (160°F) Summer 012.057 1 Thermostat, 82°C (180°F) Standard 012.085 1 Thermostat, 88°C (195°F) Winter 13 012.084 1 Temperature transmitter 14 011.138 1 Oil filter & seal

ILL N° PART N° QTY DESCRIPTION APPLICATION

15 011.131 1 Oil filter screw on, short For conversion only 16 300.522 1 4.5l. Castrol Classic 17 300.501 1 5l. Penrite Classic 18 013.074 1 Oil pressure switch P.I. models & Carb. up to CF1 19 013.380 1 Oil pressure switch Carb. CF1 on 20 016.202 1 Conversion gasket set 21 012.058 6 Spark plug, ‘Champion’, N9YCC 012.389 6 Spark plug, BP5ES NGK 22 081.001 1 Ignition coil, 12 volt P.I. up to CR1 & Carb. up to CF1 081.235 1 Ignition coil, 6 volt- ballasted P.I. CR1 on & Carb. CF1 on 23 081.016 1 Contact set 24 081.017 1 Condenser 25 081.161 1 Rotor 26 081.163 1 Distributor Cap 27 162.170 1 Screw & washer kit, for base plate, points & condenser 28 081.165 1 HT lead set, straight connectors P.I. up to CR5000 & into cap Carb. up to CF12500 081.166 1 HT lead set, 90° connectors P.I. CR5001 on & into cap Carb. up to CF12501 29 101.161 1 Air filter element P.I. models 30 101.166 2 Air filter element Carb. models 31 105.083 1 Fuel filter P.I. models 32 101.101 1 Fuel filter Carb. models 33 061.028 1 Fan belt, 3/8" wide, 9.5mm, P.I. models & 1967-’73 Carb. up to CC80027 061.203 1 Fan belt, 1/2" wide, 12.7mm, Carb. from CC80028 1973-’76 up to CF35000 061.083 1 Fan belt, 1/2" wide, 12.7mm Double pully type 34 061.084 1 Drive belt, air pump, 3/8" wide Carb. CF35001 on

16

17

Engine oil capacity:Engine sump & filter: 5.10L

Engine sump only: 4.25L

Oil filter OE Oil filter P.I. Fuel filter

Air filterP.I. Air filter

carb.016.21124 mm between ports

17© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Pistons, bearings, crankshaft, camshaft and flywheel

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 014.210 1 Piston set, STD Standard bore 74.689mm 014.212 1 Piston set, .020" 014.213 1 Piston set, .030" 014.214 1 Piston set, .040" 014.656 1 Piston set, .060" 2 014.008 6 Piston pin 3 172.492 12 Circlip 4 014.215 1 Ring set, STD 014.216 1 Ring set, .020" 014.217 1 Ring set, .030" 014.218 1 Ring set, .040" 014.219 1 Ring set, .060" 5 014.324 6 Piston liner 6 013.334 6 Con rod 7 013.178 6 Bush, con rod end 8 172.482 12 Dowel 9 162.526 12 Bolt, con rod 10 015.130 1 Con rod bearing set, STD 47.625/47.638mm 015.131 1 Con rod bearing set, .010" 015.132 1 Con rod bearing set, .020" 015.133 1 Con rod bearing set, .030" 015.134 1 Con rod bearing set, .040" 11 015.120 1 Main bearing set, STD 58.7/58.712mm 015.121 1 Main bearing set, .010" 015.122 1 Main bearing set, .020" 015.123 1 Main bearing set, .030" 015.124 1 Main bearing set, .040" 12 013.069 1 Thrust washer set, STD 2.34mm 013.071 1 Thrust washer set, .005" +0.127mm 013.397 1 Thrust washer set, .015" +0.381mm 013.398 1 Thrust washer set, .030" +0.762mm 13 013.375 1 Reground crankshaft, flush with P.I. up to CP50000 & engine back plate when installed Carb. up to CC50000 013.376 1 Reground crankshaft, protrudes P.I. CP50001 on & from engine back plate when installed Carb. CC50001 on

ILL N° PART N° QTY DESCRIPTION APPLICATION

14 011.430 6 Plug, screwed 15 017.052 6 Plug, brass 16 172.396 1 Key 17 013.064 1 Shim, .004" 013.063 1 Shim, .006" 18 013.210 1 Gear, crankshaft, double row 013.058 1 Gear, crankshaft, single row Early TR250 models 19 013.060 1 Oil thrower 20 013.281 1 Sleeve 21 011.531 1 Pulley, 3/8" P.I. models & Carb. up to CC80027 011.532 1 Pulley, 1/2" Carb. CC80028 on 22 061.201 1 Fan extension 23 172.481 1 Dowel 24 162.841 1 Bolt 25 011.158 1 Spigot bearing- in crankshaft- 1" x 1" P.I. up to CP50000 & 1967-’70 Carb. up to CC50000 011.414 1 Spigot bearing- in flywheel- 1" x 1/2" P.I. CP50001 on & 1970-’76 Carb. CC50001 on 26 011.586 1 Flywheel assembly P.I. up to CP50000 & 1967-’70 Carb. up to CC50000 011.587 1 Flywheel assembly P.I. CP50001 on & 1970-’76 Carb. CC50001 on 27 011.086 1 Starter ring gear 28 172.489 1 Dowel, flywheel 29 172.479 3 Dowel, clutch cover 30 162.439 4 Bolt, flywheel 31 013.197 1 Camshaft, 2 rings on front journal P.I. up to CR1 013.199 1 Camshaft, 3 rings on front journal P.I. CR1 on 013.195 1 Camshaft, groove on front journal Carb. up to CF12500 013.199 1 Camshaft, 3 rings on front journal Carb. CF12500 on 32 330.060 1 40 gr assembly lube for camshaft, cam followers and push rod tips 33 200.450 1 Compressor piston ring 34 015.744 1 Cam bearing

Con rod bearing set

Main bearing set

© V a n G e s t e l B & C 2 0 0 2

18 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Engine block

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 017.051 1 Core plug set For both head and block 2 011.221 1 Core plug, 1" cup type 3 011.219 5 Core plug, 1.1/2" cup type 4 011.220 3 Core plug, 1.1/4" cup type 5 011.222 1 Core plug, 2" cup type 6 017.079 1 Engine back plate 7 162.022 7 Screw 8 164.002 7 Washer, spring 9 011.548 1 Pair polished stainless steel lifting eyes 10 011.548 1 Lifting eye- front P.I. up to CR5000 & Carb. models 011.329 1 Lifting eye- front P.I. CR5001 on 11 162.045 2 Screw 12 164.002 2 Washer, spring 13 017.053 1 Lifting eye- rear P.I. models & Carb. up to CF35000 017. . . . 1 Lifting eye- rear Carb. CF35001 on 14 162.045 2 Screw 15 164.002 2 Washer, spring 16 011.445 1 Cover plate, rear 17 016.088 1 Oil seal 18 016.079 1 Gasket 19 162.577 7 Screw 20 164.002 6 Washer, spring 21 168.028 1 Washer, copper Top centre bolt 22 167.168 3 Stud, back plate & gearbox to block 23 164.002 3 Washer, spring 24 161.002 3 Nut 25 172.936 3 Dowel

ILL N° PART N° QTY DESCRIPTION APPLICATION

26 011.430 1 Plug, oil gallery, screwed 27 162.606 8 Bolt, bearing cap 3" long 28 164.021 8 Washer, spring 29 017.054 1 Blanking plate, fuel pump aperture P.I. models 30 016.081 1 Gasket, blanking plate 31 167.147 2 Stud, blanking plate P.I. models 167.116 2 Stud, fuel pump 1 1/4" Carb. models 32 164.002 2 Washer, spring 33 161.002 2 Nut 34 011.397 5 Plug, oil gallery, screwed 35 011.340 1 Plug, oil gallery, screwed 36 011.528 1 Plug, oil gallery, screwed, front 37 011.354 1 Plug, oil gallery, screwed 38 167.147 2 Stud, front plate & timing cover 39 164.002 2 Washer, spring 40 161.002 2 Nut 41 167.116 1 Stud 1 1/4" 42 167.091 1 Stud 2 1/2" P.I. models 167.116 1 Stud 1 1/4" Carb. models 43 164.002 2 Washer, spring 44 161.002 2 Nut 45 011.455 1 Plug, oil pressure valve 46 168.021 1 Washer, sealing 47 013.073 1 Spring, relief valve 48 013.072 1 Piston, relief valve 49 011.423 1 Adaptor, oil pipe P.I. models

>>> This text continues on next page

Distributor PedastalP.I. models

Distributor PedastalCarb models

19© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Engine block

ILL N° PART N° QTY DESCRIPTION APPLICATION

50 017.055 1 Engine front plate P.I. models & Carb. up to CF35000 017.056 1 Engine front plate Carb. CF35001 on 51 016.072 1 Gasket front plate 52 162.143 3 Screw 53 164.002 3 Washer, spring 54 172.285 2 Dowel 55 162.022 7 Screw 56 164.002 7 Washer, spring 57 011.328 1 Sealing block, front 58 162.743 2 Screw, bottom side 59 162.839 2 Screw, front side 60 164.002 2 Washer, spring 61 016.320 2 Filler piece, top 62 016.317 2 Filler piece, side 63 167.115 14 Stud, cylinder head 64 163.279 14 Washer, plain 65 161.286 14 Nut, cylinder head 66 061.149 1 Tap, drain, brass TR5 & TR250 67 011.439 1 Tap, drain, butterfly TR6 68 011.438 1 Plug, water drain Alternative 69 168.008 1 Washer, fibre 70 017.057 1 Pedestal assembly, distributor & P.I. models fuel metering unit 71 017.058 1 Gear, metering unit 72 105.038 1 Fuel seal 73 105.038 1 Oil seal 74 017.059 1 Drive shaft assembly

ILL N° PART N° QTY DESCRIPTION APPLICATION

75 017.060 1 Shaft, pump drive 76 013.415 1 Gear, distributor and oil pump 77 172.491 1 Pin, mills 78 017.061 1 Gear, distributor and metering unit 79 172.287 1 Pin, mills 80 017.062 1 Plug, pedestal 81 016.558 1 ‘O’ Ring 82 162.076 1 Screw 83 163.010 1 Washer, plain 84 016.293 A/R Gasket, adjusting end float 85 162.045 1 Screw 86 164.002 1 Washer, spring 87 011.395 1 ‘O’ Ring 88 105.023 1 Drive, metering unit 89 162.515 3 Screw 90 164.012 3 Washer, spring 91 163.010 3 Washer, plain 92 011.330 1 Pedestal assembly, distributor Carb. models 93 162.076 2 Screw 94 164.012 2 Washer, spring 95 163.010 2 Washer, plain 96 013.414 1 Drive shaft assembly 97 013.415 1 Gear, distributor and oil pump 98 172.491 1 Pin, mills 99 016.293 A/R Gasket, adjusting end float 100 013.765 1 Bush, drive shaft TR5, TR6 013.766 1 Bush, drive shaft TR250 101 187.016 A/R Spray, black engine paint

Distributor PedastalP.I. models

Distributor PedastalCarb models

© V a n G e s t e l B & C 2 0 0 2

20 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Oil pump, sump, timing and info

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 011.331 1 Dipstick 2 168.114 1 Washer, felt 3 011.527 1 Tube dipstick 4 017.063 1 Timing cover, single timing mark 011.533 1 Timing cover, multiple timing mark 5 016.071 1 Gasket, timing cover 6 017.065 1 Stud, screw, nut & washer kit timing cover 7 167.147 2 Stud 8 164.002 2 Washer, spring 9 161.002 2 Nut 10 162.022 5 Screw, hex head 11 164.002 5 Washer, spring 12 162.846 5 Screw, pan head 13 164.002 5 Washer, spring 14 016.087 1 Oil seal 15 013.421 1 Duplex Timing gear kit 16 013.211 1 Timing chain, double row 013.056 1 Timing chain, single row Early TR250 models 17 013.209 1 Gear, camshaft, double row 013.055 1 Gear, camshaft, single row Early TR250 models 18 013.383 1 Plate, camshaft locating 19 162.022 2 Screw 20 164.002 2 Washer, spring 21 162.842 2 Bolt 22 013.054 1 Lockplate 23 013.206 1 Tensioner, double row 013.053 1 Tensioner, single row

ILL N° PART N° QTY DESCRIPTION APPLICATION

24 013.052 1 Plate, anchor 25 172.484 2 Rivet 26 013.051 1 Pin, tensioner 27 163.093 2 Washer 28 172.315 2 Split pin 29 017.064 1 Oil sump 30 016.208 1 Gasket 31 011.341 1 Oil plug 32 023.275 1 Oil plug, magnetic Alternative 33 162.045 23 Screw, oil sump to block 34 164.002 23 Washer, spring 35 013.204 1 Oil pump assembly 36 013.767 1 Rotor & spindle 37 012.446 1 Strainer 38 162.672 3 Bolt 39 164.012 3 Washer, spring 40 016.202 1 Conversion gasket set 41 300.522 1 4.5 litres 20/50 Castrol Classic Oil For engine 42 300.501 1 5 litres 20/60 Penrite Classic Oil 43 300.112 1 1 litre gear oil 40 For gearbox 44 198.016 1 Spray, gasket remover, removes paper, paint etc. 198.037 1 Spray, gasket glue, use on paper gaskets 45 016.269 1 Form-A-Gasket, gasket cement, use on both sides of the gasket or direct on the surface 198.017 1 Form-A-Gasket, high temperature up to 315°C 46 200.711 1 10 blade Imperial gauge

Tuning info InfoSpark plug gap: 0.025” or 0.63mm Torque wrench settings:Dwell angle: 35+ or -3 degrees Cylinder head nuts: 11.1kg.m.Contact point gap: 0.014 to 0.016” Big end bolts:or 0.035” or 0.40mm colour dyed 6.9kg.m.Static ignition: posphated 6.4kg.m.Europe: 11 degrees BTDC Main bearing cap bolts: 11.1kg.m.North America: Flywheel bolts: 10.4kg.m.Lucas no. 41202A & B 10 degrees BTDC Lucas no. 41202, 41306 12 degrees BTDCLucas no. 41352 4 degrees BTDC Valve rocker clearanceLucas no. 41385 12 degrees BTDC Cold .010” or 0.25mmLucas no. 41558 10 degrees BTDC Stroboscopic timing:Europe: -North America: 4 degrees ATDC

Oil capacitiesEngine sump & filter: 5.10 litresEngine sump only: 4.25 litresGearbox non ovd. 1.13 litresGearbox with A-ovd: 2 litresGearbox with J-ovd: 1.5 litresAxle:Early TR250 1.42 litresTR250, TR5, TR6 1.27 litres

21© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Rocker and rocker covers

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 185.100 1 Polished aluminium rocker cover with nuts 2 185.075 1 Chrome filler cap 3 016.182 1 Gasket, rocker cover 4 017.066 1 Rocker cover, painted P.I. up to CR1 017.067 1 Rocker cover, painted P.I. CR1 on 017.068 1 Rocker cover, chromed Carb. up to CC50000 017.069 1 Rocker cover, painted Carb. CC50001 up to CC57332 017.070 1 Rocker cover, painted Carb. CC57333 on 5 012.321 1 Filler cap, zinc 012.249 1 Filler cap, chrome Alternative 6 085.371 1 ‘Engine Oil Filler’ label 7 016.211 1 Gasket manifold, P.I. models & 24 mm between ports Carb. CC75001 on 8 016.212 1 Gasket manifold, Carb. up to CC75000 16 mm between ports 9 161.330 3 Nut, rocker cover 10 163.001 3 Washer, plain 11 168.119 3 Washer, fibre 12 013.156 12 Cam follower 13 013.352 12 Push rod, 8.11" P.I. up to CR1 013.351 12 Push rod, 8.30" P.I. CR1 on & all Carb. models

ILL N° PART N° QTY DESCRIPTION APPLICATION

14 012.371 1 Rockers & shaft assembly 15 167.071 6 Stud, rocker shaft to head 16 163.005 6 Washer, plain 17 161.026 6 Nut 18 167.070 3 Stud, rocker cover 19 161.002 3 Nut 20 012.167 1 Rocker shaft 21 012.427 2 End plug 22 012.428 1 Pedestal, plain, front 23 012.429 4 Pedestal, central 24 012.430 1 Pedestal, driller, rear 25 016.661 6 Shim, pedestal 26 162.794 1 Screw, locating 27 164.026 2 Spring, outer 28 012.431 5 Spring, intermediate 29 163.280 4 Spacer 30 012.081 6 Rocker arm, 1, 3, 5 ,7 , 9, 11 31 012.082 6 Rocker arm, 2, 4, 6, 8, 10, 12 32 162.441 12 Adjuster screw 33 161.008 12 Nut 34 172.323 1 Split pin 35 012.634 1 Rocker shaft

ENG

IN

E OIL FILLER

SE E O W NERSINSTRUCTION MANUAL

6 1

2

016.21124 mm between ports

016.21216 mm between ports

Roller rockers reduce frictionDecrease the amount of wear on yourvalves with a roller rocker assembly. Rollerrockers reduce valve guide wear by rolling actionof the tip of the rocker over the valve stem. A typicalincrease in BHP of up to 5% for an engine meeting originalfactory spec. is possible. This actually increases the valve lift.

© V a n G e s t e l B & C 2 0 0 2

22 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Cylinder head

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 SEE PAGE 16 2 016.377 1 Head gasket set, 1967-’71 P.I. up to CP75000, Flat 016.200 1 Head gasket set, 1971-’74 P.I. CP75001 on, Raised 016.198 1 Head gasket set, 1967-’72 Carb. up to CC75000, Flat 016.199 1 Head gasket set, 1972-’76 Carb. CC75001 on, Raised 3 016.205 1 Head gasket - flat gasket P.I. up to CP75000 & Carb. up to CC75000 016.206 1 Head gasket, raised at cylinder P.I. CP75001 on & Carb. CC75001 on 4 161.286 14 Nut, cylinder head 5 163.279 14 Washer, plain 6 011.341 2 Plug, screwed 7 063.059 1 Heater valve 8 063.106 1 Adaptor, heater valve 9 017.051 1 Core plug set For both head and block 10 011.378 1 Core plug, 1 5/8" cup type 11 011.220 1 Core plug, 1 1/4" cup type 12 011.436 1 Screw 13 168.028 1 Washer, copper 14 012.402 1 Rocker feed kit 15 165.671 1 Banjo bolt 16 168.236 2 Washer, copper 17 012.058 6 Spark plug, ‘Champion’, N9YCC 012.389 6 Spark plug ‘NGK’ BP5ES 18 167.073 4 Stud, exhaust manifold 19 167.074 6 Stud, exhaust & inlet manifolds 20 167.116 3 Stud, inlet manifold 5/16 x 1.1/4” 167.342 3 Stud, 1.7/8” inlet manifold 1974-’76 21 172.483 3 Dowel

ILL N° PART N° QTY DESCRIPTION APPLICATION

22 017.099 1 Stud, nut & washer kit TR6 & all P.I. manifold to head 23 012.178 6 Inlet valve, 1.44" 24 012.179 6 Exhaust valve, 1.25" P.I. up to CR1 & Carb. up to CF1 012.180 6 Exhaust valve, 1.19" P.I. CR1 on & Carb. CF1 on 25 012.885 6 Valve seat insert, inlet P.I. up to CR1 & Carb. up to CF1 012.887 6 Valve seat insert, inlet P.I. CR1 on & Carb. CF1 on 26 012.886 6 Valve seat insert, exhaust P.I. up to CR1 & Carb. up to CF1 012.888 6 Valve seat insert, exhaust P.I. CR1 on & Carb. CF1 on 27 012.889 1 Valve spring set, double P.I. up to CP75000 012.890 1 Valve spring set, single Carb. up to CC75000 012.171 1 Valve spring set, single P.I. CP75001 to CR1 & Carb. CC75001 to CF1 012.891 1 Valve spring set, double P.I. CR1 on & Carb. CF1 on 28 012.423 12 Collar, valve spring P.I. up to CP75000 012.422 12 Collar, valve spring P.I. CP75001 to CR1 & Carb. up to CF1 012.424 12 Collar, valve spring P.I. CR1 on & Carb. CF1 on 29 012.352 6 Valve cap, inlet 012.454 12 Valve cap, inlet & exhaust Inlet and exhaust, aluminium 30 012.426 6 Valve cap, exhaust, outer 31 012.425 6 Valve cap, exhaust, inner 32 012.078 24 Valve cotter 33 012.070 6 Valve guide, inlet 012.367 6 Valve guide, inlet, bronze 34 012.172 6 Valve guide, exhaust 012.373 6 Valve guide, exhaust, bronze

Exhaust Inlet

Oil feed kit

23© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Oil filter and oil cooler installation

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 011.584 1 Oil filter assembly 2 162.840 1 Bolt 3 011.396 1 Seal 4 017.071 1 Canister 5 171.047 1 Spring 6 011.529 1 Valve 7 011.530 1 Centraliser 8 011.138 1 Oil filter & seal 9 016.295 1 Ring, sealing 10 185.166 1 Spin-on conversion kit Use without oil cooler 11 185.132 1 Spin-on conversion kit Use with oil cooler 12 016.663 1 Seal set 13 165.673 1 Bolt 14 011.131 1 Oil filter screw on, short 15 185.133 1 2 rubber hoses 071.048 1 2 stainless steel hoses

ILL N° PART N° QTY DESCRIPTION APPLICATION

16 185.680 1 4 rubber hoses & thermostat 185.681 1 4 stainless steel hoses & thermostat 17 185.622 1 Oil thermostat, screw-on 18 185.093 1 Oil thermostat, push-on 19 060.003 1 Oil cooler 13 row 20 162.029 4 Screw 21 161.019 4 Nut 22 185.440 1 Oil cooler shroud, put in from around autumn until spring 23 011.065 1 Strap kit, fit to LH radiator stay 24 172.950 1 Retaining clip, fit to LH engine mounting bracket 25 165.689 1 Screw 26 164.023 1 Washer, spring 27 161.024 2 Nut 28 135.629 1 Screw set UNF 3/16”, 1/4”, 5/16” set of 160 pieces: 40 screws, 40 nuts, 40 plain washers & 40 spring washers

Original fittings

Spin-on conversion

Spin-on conversion& oil coolertake-off

© V a n G e s t e l B & C 2 0 0 2

24 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Engine and gearbox mountings

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 011.153 2 Engine mounting 2 163.088 4 Washer, plain 3 161.025 4 Nut 4 162.480 4 Screw 5 163.088 4 Washer, plain 6 161.337 4 Nut 7 011.333 2 Engine mounting bracket 8 162.056 6 Screw Use 8 Carb. models 9 164.006 6 Washer, spring 10 167.073 2 Stud, bracket and air manifold stay P.I. models 11 164.006 2 Washer, spring 12 161.026 2 Nut 13 011.152 1 Gearbox Mounting Non-Overdrive & A-type 14 164.054 2 Washer, plain Overdrive up to 1973 15 164.021 2 Washer, spring 16 161.032 2 Nut 17 132.739 1 Crossmember 18 162.056 4 Screw 19 163.088 4 Washer, plain 20 163.088 4 Washer, plain 21 164.006 4 Washer, spring 22 161.026 4 Nut 23 162.201 2 Bolt 24 164.011 1 Washer, spring 25 161.045 1 Nut 26 111.095 1 Bracket, exhaust Carb. up to CC75000 27 111.129 1 Bracket, exhaust P.I. & Carb. from CC75001 28 011.154 2 Gearbox Mounting Non-Overdrive from 1973 29 164.002 4 Washer, spring 30 161.002 4 Nut 31 024.311 1 Crossmember 32 162.211 4 Screw 33 163.088 4 Washer, plain 34 135.251 2 Spacer 35 163.088 4 Washer, plain 36 164.006 4 Washer, spring 37 161.026 4 Nut 38 024.310 1 Bracket, mounting to gearbox bracket 39 024.309 1 Bracket, gearbox to bracket 40 162.524 2 Screw

ILL N° PART N° QTY DESCRIPTION APPLICATION

41 164.006 2 Washer, spring 42 161.026 2 Nut 43 111.131 1 Strap, exhaust 44 024.870 1 Strap, anti-rattle 45 167.339 1 Stud 46 163.001 1 Washer, plain 47 164.002 1 Washer, spring 48 161.008 1 Nut 49 165.674 1 Bolt 50 163.144 1 Spacer 51 164.060 1 Washer, shakeproof 52 161.542 1 Nut 53 162.201 1 Bolt 54 164.011 1 Washer, spring 55 161.045 1 Nut 56 011.154 2 Gearbox Mounting J-type overdrive from 1973 57 164.002 4 Washer, spring 58 161.002 4 Nut 59 024.311 1 Crossmember 60 162.211 4 Screw 61 163.088 4 Washer, plain 62 135.251 2 Spacer 63 163.088 4 Washer, plain 64 164.006 4 Washer, spring 65 161.026 4 Nut 66 024.310 1 Bracket, mounting to gearbox bracket 67 167.340 2 Stud 68 164.006 2 Washer, spring 69 161.026 2 Nut 70 162.524 2 Screw 71 164.006 2 Washer, spring 72 161.026 2 Nut 73 111.131 1 Strap, exhaust 74 024.871 1 Strap, anti-rattle 75 167.339 2 Stud 76 163.001 1 Washer, plain 77 164.002 1 Washer, spring 78 161.008 1 Nut 79 163.161 1 Washer, plain 80 164.065 1 Washer, spring 81 161.491 1 Nut

1969-’72 STD gearbox1973-’76

Overdrive1973-’76

25© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Inlet manifolds and alternator mountings • USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 017.072 1 Inlet manifold Up to CC50000 017.073 1 Inlet manifold CC50001 on 2 011.432 2 Core plug 3 011.429 1 Dry seal plug 4 017.074 1 Banjo connector Up to CC50000 5 011.178 1 Banjo bolt Up to CC50000 6 168.023 2 Washer, fibre Up to CC50000 7 011.073 1 Adaptor, brake servo hose CC50001 on 8 168.023 1 Washer, fibre CC50001 on 9 167.341 8 Stud 10 101.454 2 Adaptor, water hoses 11 062.252 1 Hose, water pump to manifold, green 062.151 1 Hose, water pump to manifold, black 12 062.253 1 Hose, manifold to pipe to pipe, green 062.122 1 Hose, manifold to pipe to pipe, black 13 172.938 4 Clip, wire type 14 011.842 1 Inlet manifold CC75000 to CF12500 017.075 1 Inlet manifold CF12501 on 15 011.432 2 Core plug Up to CF12500 16 011.429 1 Dry seal plug Up to CF12500 17 017.076 1 Banjo connector Up to CF1 017.077 1 Banjo connector CF35001 on 18 165.676 1 Banjo bolt 19 168.023 2 Washer, fibre 20 165.677 1 Adaptor, E.G.R. pipe CF12501 on 21 167.341 8 Stud 22 062.254 1 Hose, water pump to manifold, green 062.078 1 Hose, water pump to manifold, black 23 062.255 1 Hose, manifold to pipe to pipe, green Up to CF35000 062.152 1 Hose, manifold to pipe to pipe, black Up to CF35000 062.256 1 Hose, manifold to pipe to pipe, green CF35001 on 062.257 1 Hose, manifold to pipe to pipe, black CF35001 on 24 172.938 4 Clip, wire type 25 011.335 1 Mounting bracket P.I. models & Carb. up to CF12500 26 162.020 2 Screw 27 164.002 2 Washer, spring 28 162.129 1 Bolt 29 163.103 1 Washer, plain

ILL N° PART N° QTY DESCRIPTION APPLICATION

30 081.375 1 Spacer, front 31 163.281 1 Spacer, rear 32 161.021 1 Nut 33 081.374 1 Link, adjustment P.I. models to CR1701 & Carb. up to CF12500 081.739 1 Link, adjustment P.I. models from CR1702 & Carb. from CF12501 34 162.086 1 Screw 35 163.090 2 Washer, plain 36 161.433 1 Nut 37 162.687 1 Bolt 38 164.002 1 Washer, spring 39 017.078 1 Mounting bracket, alternator Carb. from CF35001. & air pump 40 162.081 2 Bolt 41 164.002 2 Washer, spring 42 162.005 2 Screw 43 164.002 2 Washer, spring 44 162.129 1 Bolt 45 161.021 1 Nut 46 163.103 1 Washer, plain 47 081.740 1 Link, alternator adjustment 48 162.081 1 Bolt 49 081.741 1 Spacer 50 161.021 1 Nut 51 162.086 1 Screw 52 163.090 2 Washer, plain 53 161.433 1 Nut 54 162.779 1 Bolt 55 163.282 1 Washer, plain 56 163.001 1 Washer, plain 57 161.021 1 Nut 58 104.212 1 Link, air pump adjustment 59 162.129 1 Bolt 60 163.001 1 Washer, plain 61 163.283 1 Spacer 62 163.001 1 Washer, plain 63 161.021 1 Nut

Alternator Air pump

Intake manifolds Carburettor cars

Carb 1967-’69

Carb 1970-’76

P.I. 1967-’74Carb 1967-’75

P.I. 1967-’74Carb 1967-’75

Carb 1975-’76

© V a n G e s t e l B & C 2 0 0 2

26 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Inlet manifolds • Europe • P.I.

ILL N° PART N° QTY DESCRIPTION APPLICATION

105.012 1 Inlet manifold set TR5 105.016 1 Inlet manifold set TR6 1 105.093 1 Inlet manifold, front TR5 105.013 1 Inlet, manifold, front TR6 2 105.094 1 Screw, air valve late TR5 105.095 1 Screw, air valve TR6 3 105.096 1 Spring, metering screw Late TR5 105.097 1 Spring, metering screw TR6 4 105.098 3 Blanking plug 5 105.099 6 Blanking plug TR5 105.100 6 Blanking plug TR6 6 162.838 1 Blanking plug 7 168.023 3 Washer, fibre 8 105.014 1 Inlet manifold, centre 9 105.101 1 Adaptor, control hose 10 105.015 1 Inlet manifold, rear 11 105.102 1 Adaptor, servo hose 12 105.103 1/2 Core plug 13 105.104 3 Throttle spindle TR5 14 105.105 3 Throttle lever TR5 15 161.061 3 Nut TR5 16 105.021 3 Throttle spindle TR6 17 105.106 3 Screw, slow running 18 105.107 3 Spring, slow running 19 105.108 6 Throttle disc 20 105.109 12 Screw, throttle disc 21 105.110 3 Spring, throttle return 22 105.111 4 Air balance tube 23 105.112 6 Air inlet tube 24 105.035 2 Air balance pipe 25 105.113 1 Hose, air valve to air inlet manifold Late TR5 105.114 1 Hose, air valve to air inlet manifold TR6

ILL N° PART N° QTY DESCRIPTION APPLICATION

26 105.017 1 Inlet manifold, front 105.020 1 Inlet manifold set ILL. No 26, 33, 35 27 105.095 1 Screw, air valve 28 105.097 1 Spring, metering screw 29 105.100 6 Blanking plug 30 162.838 1 Blanking plug 31 168.023 3 Washer, fibre 32 105.103 3 Core plug 33 105.018 1 Inlet manifold, centre 34 105.101 1 Adaptor, control hose 35 105.115 1 Inlet manifold, rear 36 105.102 1 Adaptor, servo hose 37 105.116 1 Throttle spindle, front 38 105.117 6 Throttle disc 39 102.050 12 Screw, throttle disc 40 105.118 1 Return spring 41 105.119 2 Lever, return spring 42 161.336 3 Nut 43 105.120 2 Screw 44 105.121 2 Spring 45 172.894 2 Pin 46 105.122 2 Spring 47 105.123 2 Circlip 48 105.124 1 Throttle spindle, centre 49 105.125 1 Lever, action relay 50 103.212 1 Screw, fast idle setting 51 103.213 1 Nut 52 105.189 1 Throttle spindle, rear 53 105.197 1 Spring, return 54 105.111 8 Air balance tube 55 105.112 6 Air inlet tube 56 105.035 4 Air balance pipe 57 105.190 1 Hose, air valve to air inlet manifold

TR5

TR6

P.I. 1967-’72

P.I. 1973-’74

27© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Exhaust manifolds and air cleaners

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 110.383 1 Exhaust manifold Carb. up to CC75000 2 016.212 1 Gasket, manifold 3 172.483 2 Dowel 4 162.545 3 Bolt 5 164.002 3 Washer, spring 6 172.269 6 Clamp, manifolds 7 164.006 10 Washer, spring 163.080 10 Washer, plain Use with brass nut 8 161.406 10 Nut, steel 161.006 10 Nut, brass 9 167.073 4 Stud, manifold to cylinder head 10 167.074 6 Stud, manifolds to cylinder head 11 167.062 3 Stud 12 164.006 3 Washer, spring 13 161.275 3 Nut, brass 14 016.179 1 Gasket, down pipe 15 110.384 1 Exhaust manifold P.I. models & Carb. CC75001 to CF35000 16 016.211 1 Gasket manifold 17 172.483 2/3 Dowel 18 172.269 6 Clamp, manifolds 19 164.006 10 Washer, spring 163.080 10 Washer, plain Use with brass nut 20 161.406 10 Nut, steel 161.006 10 Nut, brass 21 164.002 3 Washer, spring 22 161.002 3 Nut 23 167.116 3 Stud 24 167.073 4 Stud, manifold to cylinder head 25 167.074 6 Stud, manifolds to cylinder head 26 167.062 4 Stud 27 164.006 4 Washer, spring 28 161.275 4 Nut, brass 29 016.180 1 Gasket, down pipe 30 110.385 1 Exhaust manifold Carb. CF35001 on 31 016.211 1 Gasket manifold 32 172.483 3 Dowel 33 172.269 6 Clamp, manifolds 34 164.006 10 Washer, spring 163.080 10 Washer, plain Use with brass nut 35 161.406 10 Nut, steel 161.006 10 Nut, brass 36 164.002 3 Washer, spring 37 161.002 3 Nut 38 167.342 3 Stud 39 167.073 4 Stud, manifold to cylinder head 40 167.074 6 Stud, manifolds to cylinder head 41 167.062 4 Stud

ILL N° PART N° QTY DESCRIPTION APPLICATION

42 164.006 4 Washer, spring 43 161.275 4 Nut, brass 44 016.180 1 Gasket, down pipe 45 108.193 1 Back plate 46 101.166 2 Air filter 47 101.455 4 Seal, air filter 48 108.194 1 Front cover Up to CC75000 108.195 1 Front cover CC75001 on 49 162.469 6 Bolt 50 164.002 6 Washer, spring 51 016.249 2 Gasket, air cleaner to carb. 52 105.085 1 Air cleaner assembly 53 161.715 1 Nut, nyloc 54 101.161 1 Air filter element 55 085.373 1 ‘AC’ decal 56 105.026 1 Seal, air filter 57 172.340 1 Clip 58 105.025 1 Bracket, air cleaner 59 162.045 1 Screw 60 164.002 1 Washer, spring 61 161.002 1 Nut 62 161.002 1 Nut 63 164.002 1 Washer, spring 64 105.086 1 Air cleaner assembly, stainless steel 65 105.087 1 Strap, air cleaner support TR6 66 161.019 1 Nut 67 164.012 1 Washer, spring 68 163.011 1 Washer, plain 69 105.088 2 Hose, air cleaner feed From CP52894 70 137.467 2 Clip 71 162.647 2 Screw 72 163.013 2 Washer, plain 73 105.089 1 Air manifold assembly TR5 105.090 1 Air manifold assembly TR6 to CP50000 105.091 1 Air manifold assembly from CP50001 74 105.022 6 Hose, plain TR6 to CP50000 062.091 6 Hose, moulded From CP50001 75 172.292 4 Clip 76 105.092 1 Stay, air manifold 77 162.077 2 Screw 78 164.012 2 Washer, spring 79 161.019 2 Nut 80 167.073 2 Stud 81 164.006 2 Washer, spring 82 161.026 2 Nut 83 105.024 1 Hose, cleaner to air manifold 84 105.084 1 Hose kit, cleaner to air manifold

Carb 1967-’71 P.I. & carb 1972-’75 Carb 1976

Carb models P.I. models

AC

P.I.

© V a n G e s t e l B & C 2 0 0 2

28 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Exhaust systems

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 110.092 1 Front pipe, stainless steel Carb. up to CC67893 2 110.090 1 Intermediate pipe, stainless steel 3 110.093 1 Silencer, stainless steel 4 111.049 1 Complete fitting kit 5 016.179 1 Gasket 6 167.062 3 Stud 7 164.006 3 Washer, spring 8 161.275 3 Nut, brass 9 111.095 1 Front hanger 10 111.091 1 Clamp 11 162.577 1 Bolt 12 164.002 1 Washer, spring 13 161.002 1 Nut 14 111.093 1 Clamp 15 162.206 1 Bolt 16 111.094 1 Angle bracket 17 163.147 2 Washer, plain 18 163.001 1 Washer, plain 19 164.002 1 Washer, spring 20 161.002 1 Nut 21 111.096 1 Strap, 76mm long 22 162.020 4 Screw 23 163.001 4 Washer, plain 24 111.029 4 Distance piece 25 111.030 4 Plate 26 164.002 1 Washer, spring 27 161.002 4 Nut 28 111.028 1 Strap, 38mm long 29 110.084 1 Front pipe, stainless steel P.I. up to CR1 & Carb. from CC75001 to CF1 30 110.094 1 RH Front pipe, stainless steel 31 110.095 1 LH Front pipe, stainless steel 32 110.096 2 Link pipe, stainless steel

ILL N° PART N° QTY DESCRIPTION APPLICATION

33 110.097 1 Silencer, stainless steel 34 111.050 1 Complete fitting kit 35 016.180 1 Gasket 36 167.062 4 Stud 37 164.006 4 Washer, spring 38 161.275 4 Nut, brass 39 111.129 1 Front hanger 40 162.020 1 Screw 41 163.001 1 Washer, plain 42 164.002 1 Washer, spring 43 161.002 1 Nut 44 111.027 4 Clamp 45 162.206 4 Bolt 46 163.001 8 Washer, plain 47 164.002 4 Washer, spring 48 161.002 4 Nut 49 111.130 1 Rear bracket 50 111.027 2 Clamp 51 162.206 2 Bolt 52 163.001 6 Washer, plain 53 164.002 4 Washer, spring 54 161.002 4 Nut 55 162.020 2 Screw 56 111.030 4 Plate 57 111.096 1 Strap, 76mm long 58 111.029 2 Distance piece 59 111.028 1 Strap, 38mm long 60 162.020 2 Screw 61 163.001 2 Washer, plain 62 111.029 2 Distance piece 63 111.030 2 Plate 64 164.002 2 Washer, spring 65 161.002 2 Nut

TR250-TR6Carburettor cars1967-’71

TR6 carb 1972P.I. TR5 & TR6 1967-’76

All exhausts shown are made from stainless steel

29© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

More sport - see page 134

Exhaust systems

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 110.084 1 Front pipe, stainless steel 2 110.176 2 Link pipe, front, stainless steel 3 110.096 2 Link pipe, rear, stainless steel 4 110.097 1 Silencer, stainless steel 5 111.070 1 Complete fitting kit 6 016.180 1 Gasket 7 167.062 4 Stud 8 164.006 4 Washer, spring 9 161.275 4 Nut, brass 10 111.027 4 Clamp 11 162.206 4 Bolt 12 163.001 8 Washer, plain 13 164.002 4 Washer, spring 14 161.002 4 Nut 15 111.130 1 Rear bracket 16 111.027 2 Clamp 17 162.206 2 Bolt 18 163.001 6 Washer, plain 19 164.002 4 Washer, spring 20 161.002 4 Nut 21 162.020 2 Screw 22 111.030 4 Plate 23 111.096 1 Strap, 76mm long 24 111.029 2 Distance piece 25 111.028 1 Strap, 38mm long

ILL N° PART N° QTY DESCRIPTION APPLICATION

26 162.020 2 Screw 27 163.001 2 Washer, plain 28 111.029 2 Distance piece 29 111.030 2 Plate 30 164.002 2 Washer, spring 31 161.002 2 Nut 32 111.131 1 Front strap support 33 162.020 1 Screw 34 163.001 1 Washer, plain 35 164.002 1 Washer, spring 36 161.002 1 Nut 37 111.132 1 Angle bracket 38 111.133 1 Link bar 39 162.073 1 Screw 40 163.001 1 Washer, plain 41 164.002 1 Washer, spring 42 161.002 1 Nut 43 110.084 1 Front pipe, stainless steel 44 110.098 1 RH Front link, stainless steel 45 110.099 1 LH Front link, stainless steel 46 110.100 1 RH rear link, stainless steel 47 110.101 1 LH rear link, stainless steel 48 110.102 2 Silencer, stainless steel 49 111.051 1 Complete fitting kit

TR6 carburettor cars 1973-’76

TR5, 250 & TR6Sport system

All exhausts shown are made from stainless steel

© V a n G e s t e l B & C 2 0 0 2

30 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Cooling system

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 060.029 1 Radiator P.I. up to CP75000 (1971) Carb. up to CC75000 (1972) 060.030 1 Radiator P.I. CP75000 & on Carb. CC75000 to CF35000 060.031 1 Radiator Carb. from CF35000 2 061.087 1 Cap, filler, 7 psi P.I. up to CP75000 Carb. up to CC75000 061.035 1 Cap, filler, 13 psi P.I. CP75000 on Carb. CC75000 on 3 061.171 1 Tap, drain P.I. up to CP75000 Carb. up to CC75000 4 162.211 2 Screw 5 163.088 2 Washer, plain 6 167.072 2 Stud Carb. CF1 on 7 163.088 2 Washer, plain 8 161.026 2 Nut 9 122.212 A/R Washer, rubber 10 061.210 2 Steady brace 11 061.210 1 Pair of steady braces, stainless steel 12 162.005 2 Screw 13 164.002 2 Washer, spring 14 161.002 2 Nut 15 164.002 2 Washer, spring 16 161.002 2 Nut 17 062.077 1 Top hose, black Carb 1967-’72, PI 1967-’74 062.258 1 Top hose, green 18 062.100 1 Top hose, straight, black Carb 1972-’75 062.259 1 Top hose, straight, green 19 061.204 1 Adaptor 20 061.174 1 Vacuum valve 21 062.101 1 Top hose, curved, black Carb 1972-’75 062.260 1 Top hose, curved, green 22 062.102 1 Top hose, black Carb 1975-’76 062.261 1 Top hose, green 23 062.071 1 Bottom hose, straight, black 062.262 1 Bottom hose, straight, green

ILL N° PART N° QTY DESCRIPTION APPLICATION

24 062.072 1 Bottom hose, curved, black 062.263 1 Bottom hose, curved, green 25 061.205 1 Water return pipe, stainless steel P.I. up to CP75000 Carb. up to CC75000 26 062.069 1 Water return pipe, stainless steel P.I. CP75001 on Carb. CC75001 on 27 172.119 A/R Clip 28 061.153 1 Bottle, overflow 29 061.154 1 Cap 30 061.155 1 Grommet 31 062.125 1 Pipe, overflow 32 133.687 1 Bracket 135.306 1 Bracket, polished stainless steel 33 162.051 2 Screw 34 163.013 2 Washer, plain 35 164.015 2 Washer, spring 36 161.024 2 Nut 37 136.028 2 Air valance TR250 38 172.939 8 Clip 39 132.381 1 Air duct panel TR6 P.I. models 40 132.380 1 Air duct panel TR6 Carb. models 41 162.702 2 Screw 42 163.106 2 Washer, plain 43 161.387 2 Nut 44 162.454 1/2 Screw Carb. models use 2 45 164.012 1/2 Washer, spring 46 163.081 1/2 Washer, plain 47 161.319 1/2 Spire nut 48 161.714 1 Nut P.I. models 49 164.012 1 Washer, spring 50 163.081 1 Washer, plain 51 185.127 1 ‘KENLOWE’ electric fan kit See also page 134 52 186.159 2 4L. All season protector

Carb.1975-’76

Carb. 1972-’75

1971’(‘72) on

Carb.1967-’72P.I. 1967-’71

Carb.

P.I.

52

31© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Cooling system

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 012.464 1 Elbow, water outlet P.I. up to CP53031 Carb up to CP62888 012.086 1 Elbow, water outlet P.I. CP53032 on Carb CP62889 to CF35000 012.421 1 Elbow, water outlet Carb. CF35001 on 2 016.089 1 Gasket 3 162.020 1 Screw P.I. & Carb. to CF35000 162.020 2 Screw Carb. CF35001 on 4 162.081 1 Bolt P.I. up to CP53031 Carb up to CP62888 162.030 1 Bolt P.I. CP53032 on Carb CP62889 to CF35000 5 164.002 2 Washer, spring 6 012.013 1 Thermostat, 72°C (160°F) Summer 012.057 1 Thermostat, 82°C (180°F) Standard 012.085 1 Thermostat, 88°C (195°F) Winter 7 012.084 1 Temperature transmitter 8 011.525 1 Housing water pump 9 016.310 1 Gasket 10 162.474 1 Bolt, 3 1/8" 11 162.041 2 Bolt, 2 1/4" 12 164.002 3 Washer, locking 13 161.267 1 Adaptor 14 063.148 1 Pipe, water return, stainless steel P.I. models 15 063.088 1 Pipe, water return, stainless steel Carb. models 16 161.265 1 Tube nut 17 161.266 1 Olive 18 011.341 1 Blanking plug with heater 19 162.838 1 Blanking plug P.I. models 20 011.391 1 Adaptor Carb. models 21 168.023 1 Washer, fibre 22 167.116 3 Stud 23 164.002 3 Washer, spring 24 161.002 3 Nut 25 062.060 1 Water pump, ‘A’= 3/8" P.I. models & 1967-’73 Carb. up to CC80027 062.061 1 Water pump, ‘A’= 1/2" Carb. CC80028 to CF35000 1973-’75

ILL N° PART N° QTY DESCRIPTION APPLICATION 26 062.063 1 Water pump, 1/2" double pulley, B Carb. CF35001 on 27 016.080 1 Gasket 28 061.028 1 Fan belt, 3/8" wide, 9.5mm P.I. models & 1967-’73 Carb. up to CC80027 061.203 1 Fan belt, 1/2" wide, 12.7mm Carb. from CC80028 1973-’76 up to CF35000 061.083 1 Fan belt, 1/2" wide, 12.7mm Carb. CF35001 on (dual pully) 29 061.084 1 Drive belt, air pump, 3/8" wide Carb. CF35001 on 30 061.158 1 Fan, 8 blade, yellow P.I. up to CP50000 Carb. up to CC50000 31 061.159 1 Fan, 7 blade, yellow P.I. CP50000 to CR1 Carb. CC50000 to CF1 32 162.841 1 Bolt 33 061.201 1 Extension 34 172.481 1 Dowel 35 061.125 8 Bush 36 061.166 4 Sleeve 37 163.008 4 Washer, plain 38 174.046 2 Tab washer 39 162.030 4 Bolt 40 061.160 1 Fan, 8 blade, red P.I. CR1 on Carb. CF1 on 41 162.841 1 Bolt 42 061.201 1 Extension 43 172.481 1 Dowel 44 061.202 1 Adaptor 45 162.481 4 Bolt 46 163.001 4 Washer, plain 47 162.030 4 Bolt 48 163.001 4 Washer 49 011.531 1 Pulley, 3/8", 9.5mm P.I. models & 1967 to +/- ‘73 Carb. up to CC80027 011.532 1 Pulley, 1/2", 12.7mm Carb. CC80028 on 1973-’76 50 198.044 1 Water wetter See page 134

to water-pump

to heater

1967-’70

Carb. 1970-’72 P.I. 1970-’73

Carb. 1972-on P.I. 1973-on

Dual pully

P.I.

Carb.

50

‘A’‘B’

© V a n G e s t e l B & C 2 0 0 2

32 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Ignition system

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 081.250 1 Distributor 41219 P.I. up to CR1 081.251 1 Distributor 41501 P.I. CR1 to CR2845 081.252 1 Distributor 41542 P.I. CR2845 on 081.253 1 Distributor 41202 Carb. up to CC58360 081.254 1 Distributor 41352 Carb. CC58361 to CC75000 081.255 1 Distributor 41385 Carb. CC75001 to CF1 081.256 1 Distributor 41558 Carb. CF1 on 2 081.163 1 Distributor cap 4 081.016 1 Contact set 081.306 1 Contact set competition 5 162.170 1 Screw, check lenght 6 081.017 1 Condenser 7 162.130 1 Screw 8 081.161 1 Rotor arm 9 081.049 1 Terminal bush & lead P.I. up to CR1 & Carb. models. 10 081.369 1 Terminal bush, lead & shroud P.I. CR1 on 11 081.052 1 Earth lead 12 081.737 1 Screw & washer kit, base plate, points and condenser 13 081.413 1 Felt pad 14 081.336 1 Spring set, 5 pieces Select the required springs 15 081.060 2 Clip, cover clamping 16 081.365 1 Adjuster, micrometer P.I. up to CR1 17 081.371 1 Vacuum unit P.I. CR1 on 081.056 1 Vacuum advance unit Distributor no. 41202 18 081.380 1 Spring 19 081.379 1 Nut, knurled 20 081.370 1 Vacuum retard unit Distributor no. 41202 081.783 1 Vacuum retard unit Distributor no. 41352 081.189 1 Vacuum retard unit Distributor nos. 41385 & 41558 21 081.324 1 Clamp assembly P.I. models 081.325 1 Clamp assembly Carb. models

ILL N° PART N° QTY DESCRIPTION APPLICATION

22 165.679 1 Bolt P.I. up to CR1 165.680 1 Bolt P.I. CR1 on 165.681 1 Bolt Carb. models 23 161.713 1 Nut 24 162.045 1 Screw P.I. models 25 164.002 1 Washer, spring 26 081.200 1 Tachometer drive kit 27 081.350 1 Gear 28 016.664 1 Gasket 29 081.742 1 Bush 30 081.061 1 ‘O’ ring 31 081.291 1 Drive dog 32 172.431 1 Pin 33 081.344 1 Bush Cut to fit 34 081.345 1 Sundries kit 35 081.743 1 Suppression screen P.I. up to CR2845 081.744 1 Suppression screen P.I. CR2845 on 36 081.349 1 LT lead, 2 female terminals P.I. models 081.745 1 LT lead, 1 female & 1 male terminal Carb. models 37 081.165 1 HT lead set, straight connectors P.I. up to CR5000 & into cap Carb. up to CF12500 081.166 1 HT lead set, 90° connectors P.I. CR5001 on & into cap Carb. up to CF12501 38 081.001 1 Ignition coil, 12 volt P.I. up to CR1 & Carb. up to CF1 081.235 1 Ignition coil, 6 volt- ballasted P.I. CR1 on & Carb. CF1 on 39 085.082 1 ‘Lucas’ label 40 162.076 2 Screw 41 164.002 2 Washer, spring 42 163.001 2 Washer, plain 43 081.319 1 Cover, coil, waterproof 44 012.058 6 Spark plug, ‘Champion’, N9YCC 012.355 6 Spark plug, ‘NGK’, BP6ES Standard heat range 45 45 Lumenition kit part nos. 086.081+086.082 (see also page 133)

Partnr.: 086.081

Partnr.: 086.082

33© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

TR250 TR6

19 20

Round locking Jag. type locking

C A R B U R E T T O R C A R S

Fuel supply system • USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 100.023 1 Fuel tank 100.022 1 Fuel tank, aluminium 2 101.305 1 Drain plug 107.083 1 Drain plug, stainless steel 3 168.023 A/R Washer, fibre 4 122.225 A/R Seal 5 122.224 A/R Plug, blanking 6 162.065 6 Screw 7 164.012 6 Washer, spring 8 163.070 6 Washer, plain 9 121.272 2 Pad, top 11 101.155 1 Sending unit 12 016.024 1 Gasket 13 101.359 1 Washer 14 162.834 6 Screw 15 168.126 1 Washer, fibre 16 101.283 1 Filler cap TR250 17 141.237 1 Filler cap TR6 18 101.313 1 Seal 19 141.092 1 Filler cap, locking, round 20 141.238 1 Filler cap, locking, lozenge 21 101.289 1 Grommet

ILL N° PART N° QTY DESCRIPTION APPLICATION

22 101.015 1 Hose 23 172.115 2 Clip 24 101.311 1 Pipe, tank to connector 25 102.097 1 Olive 26 161.380 1 Nut 27 101.302 5 Connector 28 101.367 1 Pipe, intermediate 29 108.251 1 Pipe, intermediate to filter 30 101.101 1 Fuel filter 31 172.521 4 Clip 32 172.175 8 Clip 33 101.312 1 Pipe assembly, filter to pump 34 102.097 1 Sleeve 35 161.380 1 Nut 36 172.392 A/R Clip 37 172.839 2 Clip CF1 on 38 172.522 2 Rivet 39 101.142 1 Fuel pump 40 101.140 1 Repair kit, fuel pump 41 016.378 1 Gasket 42 164.002 2 Washer, spring 43 161.002 2 Nut

© V a n G e s t e l B & C 2 0 0 2

34 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Carburettors, parts and repair kits • USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 103.240 1 TR250 TR6 ’69 Front carb. 3150R 103.241 1 TR250 TR6 ’69 Rear carb. 3150L 103.242 1 TR6 70-71 Front carb. 3292R 103.243 1 TR6 70-71 Rear carb. 3292L 103.244 1 TR6 70-71 Front carb. 3365R 103.245 1 TR6 70-71 Rear carb. 3365L 103.246 1 TR6 1971 Front carb. 3385R 103.247 1 TR6 1971 Rear carb. 3385L 103.248 1 TR6 1972 Front carb. 3337R 103.249 1 TR6 1972 Rear carb. 3337L 103.250 1 TR6 1973 Front carb. 3508R 103.251 1 TR6 1973 Rear carb. 3508L 103.252 1 TR6 74-75 Front carb. 3613R 103.253 1 TR6 74-75 Rear carb. 3613L 103.254 1 TR6 75-76 Front carb. 3771R 103.255 1 TR6 75-76 Rear carb. 3771L 2 330.070 1 125ml. Carb. Oil 3 200.572 1 Synchroniser 4 200.656 1 Adjusting tool, from top side 5 103.004 1 REBUILDING KIT: gaskets, jets, seals diaphragms, screws, needle valves throttle shafts and disc. Metering needles not included. This kit will do 2 carburetters. 6 103.011 2 SERVICE KIT: gaskets, jets, diaphragms and needle valve. This kit will do 1 carburetter. 7 103.060 2 Damper assembly C3150 to C3613 103.063 2 Damper assembly C3771 only 8 103.257 2 Washer, fibre

ILL N° PART N° QTY DESCRIPTION APPLICATION

9 103.071 2 Piston spring 10 103.184 8 Screw, top cover 11 103.041 2 Diaphragm 12 103.258 8 Screw 13 103.259 2 Weight C3508 to C3771 14 103.190 2 Ring C3292 to C3771 15 103.140 2 Metering needle, fixed (B2Y) C3150 103.261 2 Metering needle, fixed (BIAF) C3292 103.144 2 Metering needle, adjustable (BIAF) C3365 to C3771 16 103.188 2 Screw, metering needle C3150 & C3292 103.329 2 Screw, metering needle C3365 to C3771 17 103.079 1 Throttle shaft, front 103.274 1 Throttle shaft, rear 18 103.092 2 Throttle disc 19 103.207 4 Screw, throttle disc 20 103.238 2 Spring, throttle return C3150 to C3508 103.239 2 Spring, throttle return C3613, C3771 21 103.279 2 Lever, throttle stop C3150 to C3337 103.280 2 Lever, throttle stop C3508 103.281 2 Lever, throttle stop C3613, C3771 22 103.282 2 Screw, fast idle C3150 to C3508 103.212 2 Screw, fast idle C3613, C3771 23 103.213 2 Nut 24 103.283 1 Locktab Front carb 164.031 1 Lockwasher Rear carb

>>> This text continues on next page

Front carb

Rear carb Service kit

Rebuilding kit

Gasket set

See rebuildingkit

35© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Carburettors, parts and repair kits • USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

25 103.284 1 Nut, extension Front carb 103.215 1 Nut Rear carb 26 103.032 2 Needle valve 103.196 2 Needle valve, GROSE-JET Improved type 27 103.269 2 Float chamber 28 103.270 2 Plug, jet assembly C3150 to C3385 103.271 2 Plug, float chamber, brass cap type C3337 to C3771 29 103.200 6 Screw & washer, long 30 103.199 6 Screw & washer, short 31 103.195 2 Hinge pin 32 103.273 2 Float assembly 33 103.262 1 Adaptor, front carb. C3150 to C3365 103.158 1 Adaptor, rear carb. C3613 & C3771 34 103.176 2 Bypass valve C3150 103.177 2 Bypass valve C3292 to C3508 103.174 2 Bypass valve C3613 & C3771 35 103.388 2 Diaphragm kit 36 103.181 2 Screw, idle trimming 37 103.182 2 Spring 38 103.265 4 Seal, throttle shaft 39 103.101 2 Temperature compensator 40 103.389 2 Cover kit 41 103.267 2 Seal, small 42 103.268 2 Seal, large 43 103.390 2 Cold start valve C3292 & C3365 103.391 2 Cold start valve C3385 to C3508 103.392 1 Cold start valve, RH - Front C3613 103.393 1 Cold start valve, LH - Rear C3613 103.394 2 Cold start valve C3771

ILL N° PART N° QTY DESCRIPTION APPLICATION

44 172.274 2 Clip, choke cable 45 103.206 2 Screw, throttle stop C3150 to C3508 46 103.275 2 Screw, throttle stop C3613 & C3771 47 103.165 2 Spring C3150 to C3508 48 103.276 2 Spring C3613 & C3771 49 103.277 2 Screw, lever stop C3613 & C3771 50 103.278 2 Nut C3613 & C3771 51 103.296 2 Lever, vent valve C3508 103.296 2 Lever, vent valve C3613 & C3771 52 102.521 1 Pipe, carb. to pump To CC67893 102.522 1 Pipe, carb. to pump CC75001 to CC85737 102.523 1 Pipe, carb. to pump CFI on 53 102.373 1 Connector, pipe to pipe To CC67893 101.308 1 Connector, pipe to pipe CP50001 to CP54584 102.519 1 Connector, pipe to pipe CC75001 on 54 102.373 1 Connector, to front carb. To CC67893 55 102.520 1 Connector, to front carb. CP50001 on 56 102.373 1 Connector, to rear carb. 57 101.314 1 Pipe assembly To CC67893 58 101.315 1 Pipe assembly CC75001 on 59 103.256 1 Spindle coupling 60 103.232 2 Folded coupling assembly 61 102.055 4 Bolt 62 102.056 4 Washer 63 102.057 4 Nut 64 016.261 2 Insulator 65 016.260 4 Gasket

Front carb

Rear carb Service kit

Rebuilding kit

Gasket set

See rebuildingkit

© V a n G e s t e l B & C 2 0 0 2

36 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Metering unit

Fuel filter elementP.I.

Fuel supply system TR5 • Europe 1967-’69

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 100.023 1 Fuel tank 100.022 1 Fuel tank, aluminium 2 101.305 1 Drain plug 107.083 1 Drain plug, stainless steel 3 168.023 1 Washer, fibre 4 122.225 1 Seal 5 162.515 6 Screw 6 164.012 6 Washer, spring 7 163.070 6 Washer, plain 8 121.272 2 Pad 10 101.155 1 Sending unit 11 101.359 1 Washer 12 016.024 1 Gasket 13 162.727 6 Screw 14 168.126 6 Washer, fibre 15 101.283 1 Filler cap 16 101.299 1 Seal, inside cap 17 141.092 1 Filler cap, locking, round 18 141.238 1 Filler cap, locking, lozenge 19 101.289 1 Grommet 20 101.015 1 Hose 21 172.115 2 Clip 22 105.046 1 Flexible hose 105.137 1 Flexible hose, stainless steel 23 105.054 1 Pipe, union to hose 24 105.069 1 Union 25 105.072 1 Pipe, union to valve 26 101.859 1 Hose 27 105.057 1 Pipe, front 28 105.059 1 Connector 29 105.073 1 Pipe, intermediate 30 105.061 2 Connector 31 105.126 1 Pipe, rear 32 122.193 1 Grommet 33 101.312 1 Pipe, tank outlet 34 104.131 1 Hose, tank to filter 35 101.312 1 Pipe, filter to pump 36 105.127 1 Filter assembly 37 101.259 1 Filter element 38 162.072 2 Bolt 39 163.088 2 Washer, plain

ILL N° PART N° QTY DESCRIPTION APPLICATION

40 164.006 2 Washer, spring 41 161.026 2 Nut 42 105.128 1 Pipe, vent to tank 43 105.129 1 Adaptor 44 168.237 1 Washer, sealing 45 101.312 1 Pipe, hose to filter 46 105.130 1 Hose, filter to pump 47 105.067 1 Pipe, inlet to pump 48 101.156 1 Fuel pump 49 105.039 3 Mount 50 163.081 3 Washer, plain 51 164.012 3 Washer, spring 52 161.019 3 Nut 53 105.131 1 Tubing 54 122.195 1 Grommet 55 105.132 1 Hose, pump to ‘T’ piece Up to CP2595 105.133 1 Hose, pump to ‘T’ piece CP2596 on 105.134 1 Hose, pump to ‘T’ piece, stainless steel 56 122.420 1 Grommet 57 105.135 1 ‘T’ piece 58 105.039 2 Mount 59 163.081 4 Washer, plain 60 164.012 4 Washer, spring 61 161.019 4 Nut 62 105.179 1 Pressure relief valve 63 168.238 1 Dowty washer 64 105.040 1 Hose, return 105.136 1 Hose, return, stainless steel 65 122.197 1 Grommet 66 172.839 3 Clip, pipe to chassis, double 67 172.522 6 Rivet 68 172.838 1 Clip, pipe to chassis 69 172.289 1 Clip, drain pipe 70 162.157 1 Screw 71 172.941 1 Clip 72 165.682 1 Screw 73 164.015 1 Washer, locking 74 161.024 1 Nut 75 172.264 2 Clip 76 172.086 A/R Clip, double

37© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Metering unit

P.I.

Fuel supply system P.I. 1969 • Europe

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 100.023 1 Fuel tank 100.022 1 Fuel tank, aluminium 2 101.305 1 Drain plug 107.083 1 Drain plug, stainless steel 3 168.023 1 Washer, fibre 4 122.225 1 Seal 5 162.515 6 Screw 6 164.012 6 Washer, spring 7 163.070 6 Washer, plain 8 121.272 2 Pad, top 10 101.155 1 Sending unit 12 016.024 1 Gasket 13 162.727 6 Screw 14 168.126 6 Washer, fibre 15 141.237 1 Filler cap 16 101.299 1 Seal, inside cap 17 141.092 1 Filler cap, locking, round 18 141.238 1 Filler cap, locking, lozenge 19 101.289 1 Grommet 20 101.015 1 Hose 21 172.115 2 Clip 22 105.046 1 Flexible hose 105.137 1 Flexible hose, stainless steel, breaded 23 105.054 1 Pipe, union to hose 24 105.069 1 Union 25 105.070 1 PIPE, intermediate 26 105.069 1 Union 27 105.071 1 Pipe, valve to union 28 122.193 1 Grommet 29 101.859 1 Hose, retour 30 105.057 1 Pipe, front, retour 31 105.059 1 Connector 32 105.060 1 Pipe, intermediate, retour 33 105.061 2 Connector 34 105.126 1 Pipe, rear, retour 35 122.193 1 Grommet 36 101.312 1 Pipe, tank outlet 37 108.196 1 Hose, tank to filter 38 101.312 1 Pipe, filter to pump 39 105.138 1 Filter assembly 40 101.259 1 Filter element 41 162.072 2 Bolt 42 163.088 2 Washer, plain

ILL N° PART N° QTY DESCRIPTION APPLICATION

43 164.006 2 Washer, spring 44 161.026 2 Nut 45 105.128 1 Pipe, vent to tank 46 105.129 1 Adaptor 47 168.237 1 Washer, sealing 48 105.139 1 Banjo union 49 105.140 1 Banjo bolt 50 168.239 2 Washer, sealing 51 105.130 1 Hose, filter to pump 52 105.067 1 Pipe, inlet to pump 53 101.156 1 Fuel pump Bosh kit see page 42 54 105.039 3 Mount 55 163.097 3 Washer, plain 56 164.012 3 Washer, spring 57 161.019 3 Nut 58 105.131 1 Tubing 59 122.195 1 Grommet 60 108.197 1 Hose, pump to ‘T’ piece 108.199 1 Hose, pump to ‘T’ piece, stainless steel, breaded 61 105.135 1 ‘T’ piece 62 105.039 2 Mount 63 163.097 4 Washer, plain 64 164.012 4 Washer, spring 65 161.019 4 Nut 66 105.177 1 Pressure relief valve 67 168.240 1 Dowty washer 68 108.198 1 Pipe, valve to connector 69 105.141 1 Hose, return 70 105.142 1 Pipe, valve into filter 71 172.839 3 Clip, pipe to chassis, double 72 172.522 6 Rivet 73 172.838 1 Clip, pipe to chassis Up to CP26892 74 172.308 1 Clip, pipe to chassis, double CP26893 on 75 172.289 1 Clip, drain pipe 76 162.157 1 Screw 77 172.263 1 Clip 78 165.682 1 Screw 79 164.015 1 Washer, locking 80 161.024 1 Nut 81 172.264 2 Clip 82 172.086 A/R Clip, double

© V a n G e s t e l B & C 2 0 0 2

38 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Metering unit

P.I.

Fuel supply system PI 1970-’74 • Europe

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 100.023 1 Fuel tank 100.022 1 Fuel tank, aluminium 2 101.305 1 Drain plug 107.083 1 Drain plug, stainless steel 3 168.023 1 Washer, fibre 4 122.225 1 Seal 5 122.224 A/R Plug, blanking 6 162.515 6 Screw 7 164.012 6 Washer, spring 8 163.070 6 Washer, plain 9 121.272 2 Pad, top 11 101.155 1 Sending unit 12 016.024 1 Gasket 14 162.727 6 Screw 15 168.126 6 Washer, fibre 16 141.237 1 Filler cap 17 101.299 1 Seal 18 141.092 1 Filler cap, locking, round 19 141.238 1 Filler cap, locking, lozenge 20 101.289 1 Grommet 21 101.015 1 Hose 22 172.115 2 Clip 23 105.046 1 Flexible hose 105.137 1 Flexible hose, stainless steel breaded 24 105.054 1 Pipe, union to hose 25 105.069 2 Union 26 105.070 1 Pipe, intermediate 27 105.071 1 Pipe, valve to union 28 122.193 1 Grommet 29 105.055 1 Hose, retour, push-on up to CP75000 105.056 1 Hose, retour, screw-on CP75001 on 30 105.057 1 Pipe, front, retour up to CP75000 105.058 1 Pipe, front, retour CP75001 on 31 105.059 1 Connector 32 105.060 1 Pipe, intermediate 33 105.061 1 Connector 34 105.062 1 Pipe, rear, retour 35 105.064 1 Connector 36 105.065 1 Pipe, return to tank 37 122.193 1 Grommet 38 101.312 2 Pipe, tank outlet 39 101.549 1 Hose, tank to filter up to CR5000 105.066 1 Hose, tank to filter CR5001 on 40 105.138 1 Filter assembly 41 101.259 1 Filter element 42 162.072 2 Bolt

ILL N° PART N° QTY DESCRIPTION APPLICATION

43 163.088 2 Washer, plain 44 164.006 2 Washer, spring 45 161.026 2 Nut 46 105.143 2 Plug, screwed 47 168.241 2 Washer, sealing 48 105.139 1 Banjo union 49 105.140 1 Banjo bolt 50 168.239 2 Washer, sealing 51 105.130 1 Hose, filter to pump 52 105.067 1 Pipe, inlet to pump 53 101.156 1 Fuel pump 54 105.039 3 Mount 55 163.097 3 Washer, plain 56 164.012 3 Washer, spring 57 161.019 3 Nut 58 105.144 1 Pipe assembly, drain 59 101.859 1 Elbow 60 105.068 1 Pipe, drain 61 105.145 1 Tube 62 102.373 1 Connector 63 122.197 1 Grommet 64 105.131 1 Tubing 65 122.195 1 Grommet 66 108.197 1 Hose, pump to ‘T’ piece 108.199 1 Hose, pump to ‘T’ piece, stainless steel breaded 67 105.135 1 ‘T’ piece 68 105.039 2 Mount 69 163.097 4 Washer, plain 70 164.012 4 Washer, spring 71 161.019 4 Nut 72 105.010 1 Pressure relief valve, short body to body no. 51887CP 73 105.011 1 Pressure relief valve, long body body no. 51888CP on 74 168.146 1 Dowty washer 75 108.198 1 Pipe, valve to connector 76 104.102 1 Connector 77 105.146 1 Pipe, return to tank 78 172.839 3 Clip, pipe to chassis, double 79 172.522 6 Rivet 80 172.308 1 Clip, pipe to chassis, double 81 172.289 1 Clip, return pipe 82 162.157 1 Screw 83 172.263 1 Clip 84 165.690 1 Screw 85 164.015 1 Washer, locking 86 161.024 1 Nut 87 172.086 A/R Clip, double

39© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Right hand drive

Left hand drive

Choke cables LHD Accelerator cable101.446: inner cable short: 1214mm 101.270: inner cable: 1354mm outer cable short: 1060mm outer cable: 1187mm inner cable long: 1365mm outer cable long: 1235mm101.447: use 101.446

P.I.

Accelerator cables, pedals and choke cables • Europe

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 108.200 1 Accelerator cable, RHD CP models 108.201 1 Accelerator cable, RHD CR models 2 168.144 1 Washer, rubber 3 172.165 1 Clip CP models 172.251 1 Clip CR models 4 172.942 1 Clip 5 102.032 1 Clevis pin 6 163.013 2 Washer, plain 7 172.286 1 Split pin 8 101.950 1 Accelerator pedal, RHD 9 137.468 1 Plate, bearing 10 101.207 1 Bearing 11 162.029 2 Screw 12 164.012 2 Washer, spring 13 161.019 2 Nut 14 163.088 1 Washer, plain 15 172.294 1 Split pin 16 101.207 1 Bearing 17 162.725 1 Bolt 18 161.002 1 Nut 19 171.097 1 Spring 20 101.270 1 Accelerator cable, LHD CP models 108.202 1 Accelerator cable, LHD CR models 21 168.144 1 Washer, rubber 22 105.037 1 Clip 23 172.289 1 Clip 24 172.041 2 ‘P’ clip 25 102.032 1 Clevis pin 26 163.013 2 Washer, plain 27 172.286 1 Split pin

ILL N° PART N° QTY DESCRIPTION APPLICATION

28 108.203 1 Accelerator pedal, LHD CP models 108.204 1 Accelerator pedal, LHD CR models 29 101.448 1 Plate, bearing 30 101.207 1 Bearing 31 162.029 2 Screw 32 164.012 2 Washer, spring 33 161.019 2 Nut 34 163.088 1 Washer, plain 35 172.294 1 Split pin 36 101.207 1 Bearing 37 162.065 1 Screw 38 161.008 1 Nut 39 052.286 1 Spring 40 101.446 1 Choke cable CP models 101.447 1 Choke cable CR models 41 161.410 1 Chrome bezel 42 164.050 1 Washer, shakeproof 43 161.716 1 Nut 44 086.132 1 Knob 45 122.180 1 Grommet 46 172.054 1 Trunnion 47 162.271 1 Screw 48 105.042 1 Adjuster assembly 49 101.926 1 Adjuster 50 161.475 2 Nut 51 172.274 1 Clip 52 105.043 1 Trunnion 53 162.271 1 Screw 54 083.058 1 Cleat

© V a n G e s t e l B & C 2 0 0 2

40 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

P.I. 1967-’72

P.I. 1973-’74

Throttle linkage • Europe

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 105.147 1 Countershaft Up to CP50000 105.148 1 Countershaft CP50001 on 2 105.149 2 Bearing bracket 3 101.207 3 Bearing 4 162.029 6 Screw 5 164.012 6 Washer, spring 6 105.150 1 Cam carrier Up to CP50000 105.151 1 Cam carrier CP50001 on 7 105.152 1 Cam 8 103.223 1 Bolt 9 164.109 1 Washer, waved 10 172.943 1 Dowel 11 054.252 1 Washer, plain, 7/16" int. dia. 12 163.147 1 Washer, plain, 5/16" int. dia. 13 164.002 1 Washer, spring 14 161.002 1 Nut 15 105.045 1 Screw 16 161.717 1 Nut 17 171.029 1 Spring 18 105.044 1 Link 19 105.153 1 Bracket 20 162.857 1 Screw 21 105.107 1 Spring 22 171.029 1 Spring 23 101.209 3 Throttle link rod Up to CP26804 24 105.077 1 Swivel post, centre, upper 25 105.078 1 Swivel post, centre, lower 26 105.041 2 Swivel post, front & rear, upper 27 105.078 2 Swivel post, front & rear, lower 28 161.024 6 Nut 29 161.024 6 Nut 30 164.015 6 Washer, spring 31 163.013 6 Washer, plain 32 161.413 3 Fix nut Alternative 33 105.154 3 Throttle link rod CP26805 on 34 105.041 3 Swivel post, upper 35 105.155 3 Swivel post, lower

ILL N° PART N° QTY DESCRIPTION APPLICATION

36 161.413 3 Fix nut 37 161.024 3 Nut 38 161.024 6 Nut 39 164.015 6 Washer, spring 40 163.013 6 Washer, plain 41 105.156 1 Throttle linkage Up to CR5000 105.157 1 Throttle linkage CR5001 on 42 105.158 2 Bearing 43 105.159 1 Fast idle cam Up to CR5000 105.160 1 Fast idle cam CR5001 on 44 105.161 1 Bracket 45 162.020 1 Screw 46 163.001 1 Washer, plain 47 105.036 1 Spring 48 105.162 1 Spacer 49 161.008 1 Nut 50 105.163 1 Bracket 51 103.212 1 Screw 52 161.717 1 Nut 53 171.098 1 Spring 54 102.032 1 Clevis pin 55 163.013 2 Washer, plain 56 172.286 1 Split pin 57 105.164 1 Throttle link Up to CR5000 105.165 1 Throttle link CR5001 on 58 105.155 1 Swivel post, lower 59 161.024 1 Nut 60 105.041 1 Swivel post, upper 61 161.413 1 Fix nut 62 161.024 2 Nut 63 164.015 2 Washer, spring 64 163.081 2 Washer, plain 65 105.166 1 Bracket 66 162.077 4 Screw 67 164.012 4 Washer, spring 68 163.081 4 Washer, plain

P.I.

41© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Screw on

Push on

High qualitystainless steelbraidedinjector pipe set

Screw on

Push on

Metering units, injectors and pipes

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 105.001 1 Metering unit, with push on petrol TR5 return tube and without air bleed tick-over control valve 105.002 1 Metering unit, with push on petrol TR6 to CP75314 return tube 105.003 1 Metering unit, with screw on petrol TR6 from CP75315 return tube (green cap) to CR1 105.167 1 Metering unit, with emission control TR6 from CR system 2 105.168 1 Union, push-on-retour 3 105.169 1 Union, screw-on-retour 4 168.242 4 Washer, sealing 5 168.243 1 Washer, inlet sealing 6 105.170 1 Strainer 7 105.023 1 Drive, plastic 8 105.171 1 Union set for metering unit 9 105.034 1 Seal set for metering unit installation 10 011.395 1 ‘O’ ring 11 105.172 4 ‘O’ ring 12 105.027 2 Banjo bolt Outlets nos. 2 and 5 13 172.274 1 Clip, choke cable 14 105.043 1 Trunnion

ILL N° PART N° QTY DESCRIPTION APPLICATION

15 162.271 1 Screw 16 162.515 3 Screw 17 164.012 3 Washer, spring 18 163.081 3 Washer, plain 19 105.172 1 Elbow 20 105.173 1 Hose, vacuum 21 172.944 1 Clip 22 105.005 6 Injector, push-in 105.006 6 Injector, screw-on 23 105.007 6 Adaptor, push fit 105.008 6 Adaptor, screw fit 24 025.022 6 O’ ring 25 105.174 3 Plate 105.175 3 Plate, stainless steel 26 162.865 3 Screw 27 164.002 3 Washer, spring 28 105.009 1 Injector pipe set, set of 6 pipes 29 172.945 3 Clip CP models 30 172.946 2 Clip, double CR models 31 172.947 3 Clip, quadruple 32 105.082 1 Injector pipe set, set of 6 pipes, stainless braided

© V a n G e s t e l B & C 2 0 0 2

42 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Short

LongFor Bosh pump

Improved pump

No more overheating problems

Relief valve, fuel pump and filter

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 105.177 1 Relief valve assembly, short body Up to body no. 51887CP 2 105.176 1 Strainer 3 105.010 1 Relief valve, short 4 168.146 1 Dowty washer 5 105.178 1 Relief valve assembly, long body From body no. 51888CP 6 105.176 1 Strainer 7 105.011 1 Relief valve, long 8 168.146 1 Dowty washer 9 105.135 1 ‘T’ piece 10 168.240 1 Dowty washer 11 105.039 4 Mount 12 163.097 4 Washer, plain 13 164.012 4 Washer, spring 14 161.019 4 Nut 15 101.156 1 Fuel pump 16 105.180 1 Fuel pump repair kit, springs and seals 17 101.182 1 ‘O’ ring 18 105.181 1 Seal, drive shaft 19 105.182 1 Brush & spring set 20 083.523 1 Brush gear 21 105.183 2 Union 22 168.242 2 Washer, sealing 23 105.039 3 Mount 24 163.097 3 Washer, plain 25 164.012 3 Washer, spring

ILL N° PART N° QTY DESCRIPTION APPLICATION

26 161.019 3 Nut 27 101.157 1 Cooling coil 28 105.079 1 Bosch replacement pump kit includes pump, filter, hoses and clamps 29 105.184 1 Relief valve, for Bosch pump, 95 p.s.i. 30 105.138 1 Fuel filter assembly 31 101.259 1 Filter element 32 105.185 2 ‘O’ ring 33 105.186 1 Washer, sealing 34 105.129 1 Adaptor Up to CP50000 35 168.237 1 Washer, sealing 36 105.187 1 Plug, blanking From CP50001 37 168.237 1 Washer, sealing 38 105.143 2 Plug, blanking 39 168.241 2 Washer, aluminium, sealing plug 40 162.072 2 Screw 41 163.088 2 Washer, plain 42 164.006 2 Washer, spring 43 161.026 2 Nut 44 083.874 1 Inertia cut-off switch 45 135.289 1 Clip RHD from body no. 52328CP 46 165.683 2 Screw 47 163.013 2 Washer, plain LHD from body no. 51399CP 48 164.015 2 Washer, spring 49 161.024 2 Nut

28

BOSCH

43© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Accelerator pedal

Air pump & air injection

USAAccelerator pedal, air pump and air injection • USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 108.205 1 Accelerator pedal, LHD 2 162.065 1 Screw 3 161.362 1 Nut 4 101.207 2 Bearing 5 163.088 2 Washer, plain 6 164.044 1 Washer, coil 7 172.294 1 Split pin 8 101.449 1 Control lever 9 162.832 1 Bolt 10 164.002 1 Washer, spring 11 163.001 1 Washer, plain 12 161.002 1 Nut 13 052.286 1 Spring To CF1 171.039 1 Spring CF1 on 14 101.287 1 Clip 15 101.434 1 Control rod assembly 16 171.027 1 Spring 17 164.015 1 Washer, spring 18 101.450 1 Support bracket assembly To CF1 101.451 1 Support bracket assembly CF1 on 19 102.431 1 Bell crank lever 20 103.223 1 Bolt, shouldered 21 164.002 1 Washer, spring 22 163.001 1 Washer, plain 23 161.002 1 Nut 24 101.452 1 Throttle stop 25 164.023 1 Washer, spring 26 161.462 1 Nut 27 103.157 2 Control Link

ILL N° PART N° QTY DESCRIPTION APPLICATION

28 101.323 1 Rod end 29 164.012 2 Washer, spring 30 161.362 2 Nut 31 104.219 1 Air pump CF35001 on 32 104.214 1 Pulley, air pump 33 162.555 3 Screw 34 163.081 3 Washer, plain 35 061.084 1 Belt, air pump drive 36 104.215 1 Hose, pump to pipe 37 173.017 2 Clip 38 104.216 1 Pipe 39 173.018 1 Clip 40 104.217 1 Hose, pipe to diverter valve 41 173.017 2 Clip 42 104.218 1 Diverter valve 43 016.398 1 Gasket 44 162.077 2 Screw 45 163.081 2 Washer, plain 46 161.756 2 Nut 47 162.005 2 Screw 48 164.002 2 Washer, spring 49 104.148 1 Check valve 50 104.223 1 Hose, diverter to check valve 51 173.019 2 Clip 52 104.224 1 Hose, diverter valve to servo 53 172.524 2 Clip, fir tree 54 172.945 2 Clip, fir tree 55 104.225 1 Manifold, air injection 56 104.226 6 Injection tube

© V a n G e s t e l B & C 2 0 0 2

44 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

TR250, TR6 to CC32142

TR6 CC32142 to CF1

TR6 CF1 on

Breather system • USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 082.067 1 Emission control valve To CC32142 2 081.483 1 Repair kit 3 104.075 1 Hose, ‘T’ fitting to rocker cover 4 103.395 1 ‘T’ fitting 5 104.076 1 Hose, ‘T’ fitting to valve 6 104.077 1 Hose, ‘T’ fitting to air cleaner 7 172.518 6 Clip 8 104.072 1 Carbon canister CC50001 to CC85737 9 104.086 1 Restrictor 10 104.219 1 Hose, ‘T’ fitting to canister CC50001 to CC67893 104.090 1 Hose, ‘T’ fitting to canister CC75001 to CC85737 11 011.534 2 ‘T’ fitting 12 104.083 1 Hose, ‘T’ fitting to front carb CC50001 to CC65347 104.220 1 Hose, ‘T’ fitting to front carb CC65348 to CF1 13 103.302 2 Adaptor, hose to carb CC50001 to CC67893 107.092 2 Adaptor, hose to carb CC75001 to CC85737 14 104.220 1 Hose, ‘T’ fitting to ‘T’ fitting CC50001 to CC65347 104.084 1 Hose, ‘T’ fitting to ‘T’ fitting CC65348 to CF1 15 104.083 1 Hose, ‘T’ fitting to rear carb CC50001 to CC65347 104.221 1 Hose, ‘T’ fitting to rear carb CC65348 to CF1 16 011.554 1 Breather CC50001 to CC65347 17 104.222 2 Hose, breather assembly CC50001 to CC65347 18 104.083 1 Hose, ‘T’ fitting to rocker cover CC65348 to CF1 104.227 1 Hose, ‘T’ fitting to rocker cover CC75001 to CC85737 19 172.518 A/R Clip CC50001 to CC85737

ILL N° PART N° QTY DESCRIPTION APPLICATION

20 104.061 1 Carbon cannister CF1 on 21 104.056 1 Anti run-on valve 22 104.228 1 Hose, cannister to anti run-on valve 23 104.229 1 Hose, anti run-on valve to servo unit 24 104.230 1 Hose, front ‘T’ fitting to cannister 25 172.518 2 Clip 26 105.173 1 Hose, outer ‘T’ fitting to cannister 27 172.442 6 Clip 28 011.534 1 T’ fitting, front 29 104.227 1 Hose, ‘T’ fitting to front carb 30 107.092 2 Adaptor, hose to carb 31 104.227 1 Hose, ‘T’ fitting to ‘T’ fitting 32 011.534 1 T’ fitting, rear 33 104.227 1 Hose, ‘T’ fitting to rocker cover 34 104.227 1 Hose, ‘T’ fitting to rear carb 35 104.131 1 Hose, outer ‘T’ fitting to rear carb 36 104.231 1 T’ fitting, outer 37 104.232 1 Hose, outer ‘T’ fitting to front carb 38 104.223 1 E.G.R. valve CF12501 on 39 161.628 1 Nut, lock 40 104.234 1 Pipe, connecting 41 161.480 2 Nut, tubing 42 161.266 2 Sleeve 43 104.235 1 Adaptor

USA

45© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

TR250, TR6 TO CC32142 TR6 from CC50001 to CC75000

Rear

Front

Front

Rear

Front

Rear

Rear

TR6 CC75001 to CF12500 TR6 CC12501 to CF35000

Front

TR6 CF35000 on

Vacuum system • USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 081.923 1 Vacuum control valve To CC32142 2 162.822 2 Screw 3 163.013 2 Washer, plain 4 164.015 2 Washer, spring 5 161.024 2 Nut 6 017.074 1 Banjo connection 7 134.921 1 Pipe assembly, banjo to rear carb. 8 081.924 2 Connector, angled 9 134.922 1 Pipe connection, banjo to front carb. 10 081.260 4 Connector, elbow 11 081.265 1 Connector, elbow 12 081.091 1 Vacuum pipe, retard 13 081.925 1 Vacuum pipe, advance 14 172.397 1 Clip 15 172.496 3 Clip 16 081.260 3 Connector, elbow CC50000 to CC58360 081.092 1 Connector, elbow CC58298 to CC75000 17 081.091 1 Vacuum pipe, advance CC50000 to CC58360 081.091 1 Vacuum pipe, rear carb. to retard CC58298 to CC75000 18 081.092 1 Connector, elbow CC50000 to CC58360 081.260 1 Connector, elbow CC58298 to CC75000 19 081.925 1 Vacuum pipe, retard CC50000 to CC75000 20 172.397 A/R Clip CC50000 to CC58360 172.496 1 Clip CC58298 to CC75000 21 172.496 A/R Clip CC50000 to CC75000 22 061.174 1 Vacuum pipe, thermostatic CC75001 to CF12500 23 061.204 1 Adaptor, vacuum valve 24 081.091 1 Vacuum pipe, valve to retard 25 081.260 3 Connector, elbow 26 172.397 2 Clip 27 081.926 1 Vacuum pipe, valve to rear carb. 28 081.092 1 Connector, elbow 29 081.092 6 Connector, elbow CF12501 to CF35000 30 081.266 1 Vacuum pipe, fuel trap to EGR 31 081.065 2 Connector, straight

ILL N° PART N° QTY DESCRIPTION APPLICATION

32 081.270 1 Y’ fitting 33 081.263 3 Fuel trap 34 081.386 1 Connector, straight 35 081.268 1 Vacuum pipe, fuel trap to rear carb. 36 104.152 1 Connector, straight 37 081.269 1 Vacuum pipe, ‘Y’ to rear carb. 38 081.260 5 Connector, elbow 39 081.385 3 Clip 40 137.937 1 Bracket rear fuel trap mounting 41 081.091 1 Vacuum pipe, vacuum valve to retard 42 172.397 2 Clip 43 104.236 1 Thermostatic vacuum switch 44 081.267 1 Connector, elbow 45 081.266 1 Vacuum pipe, valve to trap 46 081.265 2 Connector, elbow 47 081.091 1 Vacuum pipe, valve to fuel trap 48 081.927 1 Vacuum pipe, fuel trap to front carb. 49 081.928 1 Vacuum pipe, fuel trap to T fitting connector 50 081.262 2 Connector, straight 51 081.261 1 T’ fitting 52 081.091 1 Vacuum pipe, ‘T’ fitting rear carb. 53 137.938 1 Bracket, front fuel traps 54 081.263 2 Fuel trap CF35001 on 55 137.939 1 Bracket, front fuel trap 56 081.385 2 Clip 57 081.929 1 Vacuum pipe, fuel trap to rear carb. 58 081.092 3 Connector, elbow 59 081.265 2 Connector, elbow 60 081.091 1 Vacuum pipe, fuel trap to connector 61 172.397 2 Clip 62 081.386 2 Connector, straight 63 137.937 1 Bracket, rear fuel trap mounting 64 081.260 1 Connector, elbow 65 081.930 1 Vacuum pipe, fuel trap to front carb. 66 081.266 1 Vacuum pipe, fuel trap to EGR valve

USA

© V a n G e s t e l B & C 2 0 0 2

46 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

USA up to 1972Evaporative loss system to CC75000 • USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 101.541 1 Connection, breather TR6 to CC55029 2 168.132 1 Washer, fibre 3 101.482 1 Pipe, nylon, filler neck to emission tank 4 101.489 1 Connector, to filler neck

5 101.478 2 Connector, pipe to breather 101.541 1 Connection, breather 168.132 1 Washer, fibre 101.548 1 4 way fitting 101.489 1 Connector, 4 way fitting to filler neck 105.130 1 Connector, 4 way fitting to breather, RH side of petrol tank 104.237 1 Pipe, 4 way fitting to breather, LH side of petrol tank 101.478 2 Connector, pipe to 4 way fitting & pipe to breather 104.238 1 Pipe, 4 way fitting to emission tank 101.478 2 Connector, pipe to 4 way fitting & pipe to emission tank

6 104.239 1 Emission tank TR6 to CC75000 7 172.372 4 Rivet, emission tank to inner wing 8 104.240 1 Pipe, rear, emission tank to cannister

ILL N° PART N° QTY DESCRIPTION APPLICATION

9 101.478 2 Connector 10 173.020 4 Clip 11 172.177 5 Clip, nylon 12 122.193 1 Grommet, boot floor 13 101.545 1 Pipe, front, emission tank to cannister 14 101.543 1 Connector, cannister to pipe TR6 to CC55029 101.302 1 Connector, cannister to pipe From CC55030 to CC75000 15 121.357 1 Finisher 16 172.520 5 Clip 17 083.058 1 Clip, fir tree 18 104.072 1 Carbon Canister, 2 top outlets 19 104.086 2 Restrictor 20 104.173 1 Bracket, mounting cannister 21 162.005 1 Screw 22 163.001 1 Washer, plain 23 164.002 1 Washer, spring 24 161.002 1 Nut 25 165.697 1 Screw 26 164.015 1 Washer, spring 27 161.024 1 Nut

From CC55030to CC75000

not illustrated

47© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

USA 1972-’76

Evaporative loss system from CC75001 • USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 104.110 1 Separation tank CC75000 on 2 104.111 1 Clip 3 162.165 1 Screw 4 163.013 1 Washer, plain 5 172.169 1 Nut 6 105.130 1 Connector, cannister to petrol tank CC75000 to CF12500 104.241 1 Connector, cannister to petrol tank CF12501 on 7 101.478 4 Connector, cannister to pipe CC75000 to CF12500 101.302 4 Connector, cannister to pipe CF12501 on 8 101.555 1 Pipe, rear, separation tank to cannister CC75000 to CF1 104.242 1 Pipe, rear, separation tank to cannister CF1 to 12500 101.490 1 Pipe, rear, separation tank to cannister CF12501 on 9 122.193 1 Grommet, boot floor 104.243 1 Pipe, front, emission tank to cannister CC75000 to CF1 104.244 1 Pipe, front, emission tank to cannister CF1 to 12500 10 054.716 1 Pipe, steel, intermediate CF12501 on 11 054.717 1 Pipe, nylon, front 12 101.302 1 Connector, between pipes 13 104.115 1 Restrictor

ILL N° PART N° QTY DESCRIPTION APPLICATION

14 104.072 1 Carbon Cannister, 2 top outlets CC75000 to CF1 104.061 1 Carbon Cannister, 3 top outlets CF1 on 104.173 1 Bracket, mounting cannister CC75000 to CF1 162.005 1 Screw 163.001 1 Washer, plain 164.002 1 Washer, spring 161.002 1 Nut 165.697 1 Screw 164.015 1 Washer, spring 161.024 1 Nut 15 137.940 1 Bracket, mounting cannister CF1 on 16 162.164 1 Screw 17 164.015 1 Washer, spring 18 161.024 1 Nut 19 104.056 1 Anti run-on valve 20 104.228 1 Hose, cannister to anti run-on valve 21 172.175 12 Clip CF12501 on 22 172.520 6 Clip 23 172.513 6 Clip 24 172.177 1 Clip, suspension bracket 25 172.085 3 Clip 26 083.058 1 Rubber slap

© V a n G e s t e l B & C 2 0 0 2

48 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Clutch components

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 053.054 1 Clutch master cylinder, 1967-’70 P.I. up to body no. CP50910 & 0.075" -19mm, LHD Carb. up to 52951CC 053.055 1 Clutch master cylinder, 1970-’76 P.I. from body no. CP50911 & 0.070" -17.78mm, LHD Carb. from CC52952. 027.380 1 Clutch master cylinder, 1967-’70 Up to body no. CP50910 0.075" -19mm, RHD 053.251 1 Clutch master cylinder, 1970-’76 From CP50911 0.070" -17.78mm, RHD 2 052.150 1 Repair kit, 0.075" -19mm, LHD 1967-’70 052.152 1 Repair kit, 0.070" -17.78mm, RHD 1970-’76 3 052.425 1 Push rod, LHD 052.437 1 Push rod, RHD 4 052.163 1 Filler cap 5 052.331 1 Seal 6 052.165 1 Spring, piston return 7 052.603 1 Circlip 8 172.162 1 Clevis pin 9 163.001 1 Washer, plain 10 172.294 1 Split pin 11 137.475 1 Bracket, RHD only 12 052.076 1 Dust cover 13 162.022 2 Screw, RHD 162.020 2 Screw, LHD 14 164.002 2 Washer, spring 15 054.595 1 Pedal, clutch, LHD 027.302 1 Pedal, clutch, RHD 16 027.085 1 Pedal rubber 17 054.192 2 Bush 18 171.035 1 Return spring 19 054.190 1 Pipe, clutch, steel, LHD 054.596 1 Pipe, clutch, steel, RHD 22 172.395 1 Clip, LHD 23 172.2631 4 Clip, RHD 24 162.061 2/4 Screw RHD uses 4 25 052.318 1 Connector 26 027.084 1 Hose, flexible Nylon 027.381 1 Hose, flexible braided stainless steel Aeroquip 27 027.079 1 Slave cylinder 28 027.080 1 Repair kit 29 027.155 1 Bleed screw 30 027.379 1 Spring

ILL N° PART N° QTY DESCRIPTION APPLICATION

31 027.150 1 Bracket 32 162.577 2 Bolt 33 164.002 2 Washer, spring 34 161.002 2 Nut 35 162.481 2 Bolt 36 164.002 2 Washer, spring 37 161.002 2 Nut 38 053.039 1 1L brake fluid 053.018 1 1L silicone brake fluid 39 052.117 1 Rubber grease use this grease when assembling rubber clutch and brake components 40 053.176 1 Easy bleed kit this clever one way system gives you the opportunity to bleed the system all by yourself. 41 021.073 1 Clutch kit, 3 piece, Borg & Beck 42 021.035 1 Clutch cover, Borg and Beck 43 021.037 1 Clutch plate, Borg and Beck. 44 021.039 1 Release bearing 45 162.090 6 Screw, 3/4", Borg and Beck 081.026 6 Screw, 5/8", Laycock 46 164.002 6 Washer, spring Always replace. 47 172.479 3 Dowel P.I. up to CR5000 & Carb. up to CF12500 172.480 3 Dowel P.I. CR5001 on & Carb. CF12501 on 48 200.617 1 Clutch tool 49 027.135 1 Sleeve, release bearing Bronze 50 172.394 1 Roll pin 51 027.106 1 Clutch lever 52 027.107 2 Pivot pin 53 162.433 1 Pin, tapered Improved quality 54 027.154 1 Locking wire 55 027.151 1 Clutch shaft 56 171.046 1 Spring 57 027.158 2 Bush 58 027.113 1 Push rod 59 172.162 1 Clevis pin 60 163.001 1 Washer, plain 61 172.294 1 Split pin

49© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

1967-’72 1973-’76

Gearbox assembly and remote control

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 020.053 1 Gearbox, standard 2 020.076 1 Gearbox for ‘A’ overdrive Takes ‘A’ Type 020.075 1 Gearbox for ‘J’ overdrive Takes ‘J’ Type 4 300.112 A/R 1 litre gear oil 40 Capacity is 1.3 litres for standard, 2 litre for A type & 1.5 litres for J type 5 167.168 3 Stud 6 162.128 8 Screw 7 162.481 2 Bolt 8 164.002 13 Washer, spring 9 161.002 13 Nut 10 162.887 2 Dowel bolt 11 164.006 2 Washer, spring 12 161.026 2 Nut 13 162.024 2 Bolt 14 164.025 2 Washer, shakeproof 15 164.006 2 Washer, spring 16 161.026 2 Nut 17 027.158 2 Bush 18 011.341 1 Plug, oil drain 19 023.275 1 Plug, oil drain, magnetic 20 011.341 1 Plug, oil filler 21 023.441 1 Cover, front 22 023.706 4 Screw 23 168.122 4 Washer, copper 24 023.414 1 Oil seal 25 016.263 1 Gearbox gasket set 26 016.264 1 Gasket, front cover 27 016.315 1 Gasket, end cover 28 016.266 1 Gasket, rear extension

ILL N° PART N° QTY DESCRIPTION APPLICATION

29 016.267 1 Gasket, top cover 30 016.265 1 Cover 31 165.691 2 Screw 32 168.122 2 Washer, copper 33 023.415 1 Oil seal, standard and A type 025.126 1 Oil seal, J type 34 162.096 5 Screw, standard gearbox 162.096 6 Screw, overdrive gearbox Use with 163.001 washer 35 162.630 1 Bolt, standard gearbox 36 164.002 6 Washer, spring 37 023.783 1 Gear lever knob, leather Carb 38 023.936 1 Gear lever knob, round P.I. up to CP53853 39 023.516 1 Gear lever knob, teardrop P.I. CP53854 on 40 161.433 1 Nut 41 026.011 1 Gear lever 42 023.510 1 Plunger 43 023.684 1 Spring 44 023.457 1 Cap, gear lever P.I. up to CR1 & Carb. up to CF1 45 023.458 1 Cap, gear lever P.I. CR1 on & Carb. CF1 on 46 023.455 1 Retainer 47 023.459 1 Spring, for 023.457 48 024.544 2 Pin 49 023.456 1 Spring, for 023.458 50 165.692 2 Screw 51 161.008 2 Nut 52 167.339 2 Stud, use with steady bracket 53 162.462 1 Screw 54 164.012 1 Washer, spring

>>> This text continues on next page

© V a n G e s t e l B & C 2 0 0 2

50 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

1967-’72 1973-’76

Gearbox assembly and remote control

ILL N° PART N° QTY DESCRIPTION APPLICATION

55 121.231 1 Gaiter & grommet 56 121.230 1 Grommet, upper 57 121.220 1 Grommet, lower 58 023.686 3 Core plug 59 023.688 2 Core plug 60 023.686 1 Core plug 61 023.690 A/R Plug, screwed 62 168.021 A/R Washer, sealing 63 083.052 A/R Switch, overdrive & reverse 64 168.129 A/R Washer, adjusting 65 162.626 2 Bolt, 2.7/8" 66 162.631 2 Bolt, 2.3/4" 67 162.599 4 Screw 68 164.002 8 Washer, spring 69 023.693 1 1st & 2nd selector 70 162.734 5 Screw 71 024.873 1 1st & 2nd speed rod 72 023.694 1 1st & 2nd selector fork 73 023.696 1 Sleeve 74 023.443 1 Ball 75 023.450 1 Spring Up to gearbox no. CD23951 024.874 1 Spring From gearbox no. CD23952 76 023.454 1 Plug, screwed 77 024.875 1 Core plug 78 023.443 2 Ball 79 023.449 1 Roller 80 024.876 1 3rd & 4th speed rod 81 023.451 1 Plunger Up to gearbox no. CD22093 82 023.452 1 Spring 83 023.453 1 Distance piece

ILL N° PART N° QTY DESCRIPTION APPLICATION

84 023.454 1 Plug, screwed 85 024.875 1 Core plug 86 023.443 1 Ball From gearbox no. CD22094 87 024.874 1 Spring 88 023.454 1 Plug, screwed 89 024.875 1 Core plug 90 023.447 1 3rd & 4th selector fork 91 023.698 1 Sleeve 92 023.700 1 Selector, reverse Up to gearbox no. CD10960 024.877 1 Selector, reverse From gearbox no. CD10961 93 023.699 1 Reverse rod Up to gearbox no. CC75000 024.878 1 Reverse rod From gearbox no. CC75001 94 023.904 1 Plunger 95 023.452 1 Spring 96 023.453 1 Distance piece 97 023.454 1 Plug, screwed 98 024.875 1 Core plug 99 023.701 1 Fork, reverse 100 024.879 1 Sleeve 101 023.691 1 Plate 102 023.505 3 Ring, sealing 103 162.076 2 Screw 104 164.012 2 Washer, spring 105 025.155 1 Pinion assembly 106 025.157 1 Bearing housing 107 023.653 1 Oil seal 108 025.156 1 ‘O’ Ring, standard gearbox 109 162.735 1 Screw 110 164.002 1 Washer, spring 111 163.289 1 Washer, plain 112 023.154 1 Angle drive, RHD and overdrive

51© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

A-Type

J-Type

Standard

Gearbox internal parts

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 020.058 1 Gearbox Overhaul kit 2 016.263 1 Gasket set 3 023.714 1 Gear set, constant mesh To gbx no. CD20281 4 - 1 Use gear set 023.714 To gbx no. CD20281 024.880 1 1st motion shaft, imperial Gbx no. CD20282 to CD21768 024.881 1 1st motion shaft, metric From gbx no. CD21769 024.882 1 1st motion shaft, use with 159621 Later fitted alternative to 024.881 5 023.708 1 Circlip 6 023.709 1 Washer 7 023.428 1 Bearing, 1st motion shaft 8 023.710 1 Circlip 9 023.711 1 Oil thrower 10 023.501 1 Bearing, mainshaft spigot, imperial size To gbx no. CD20281 11 023.429 1 Bearing, mainshaft spigot, ‘metric’ From gbx no. CD20282 026.138 1 Sleeve spigot bearing, when metric bearing is fitted in an imperial hole of the pinion shaft 12 023.425 2 Synchro ring 13 024.887 1 Synchronizer, 3rd & 4th To gbx no. CD19740 023.435 1 Synchronizer, 3rd & 4th From gbx no. CD19741 14 023.435 1 Outer sleeve 15 023.107 3 Ball 16 023.684 3 Spring To gbx no. CD19740 024.888 3 Spring From gbx no. CD19741 17 023.720 A/R Shim 18 023.440 1 Circlip, retaining third gear Always replace 19 024.889 1 Washer, retaining, 3 lugs 023.721 1 Washer, retaining, 6 lugs Alternative 20 023.426 1 Bush, third gear, brass Up to CR1/CF1 023.793 1 Bush, third gear, steel From CR1/CF1 023.793 1 Bush, third gear, steel, uprated

ILL N° PART N° QTY DESCRIPTION APPLICATION

21 023.499 1 3rd gear To gbx no. CD20281 023.500 1 3rd gear From gbx no. CD20282 22 023.427 1 Bush, second gear, brass To CR5000/CF12500 023.794 1 Bush, second gear, steel From CR5001/CF12501 23 023.744 1 Bush, second gear, uprated To CR5000/CF12500 24 023.722 1 2nd gear To gbx no. CD20281 024.890 1 2nd gear Gbx no. CD20282 to CD21768 024.891 1 2nd gear From gbx no. CD21769 to CR5000/CF12500 023.438 1 2nd gear From CR5001/CF12501 25 023.745 A/R Washer, spacer 0.118, silver 023.746 A/R Washer, spacer 0.121, green 023.747 A/R Washer, spacer 0.124, blue To CR5000/CF12500 023.748 A/R Washer, spacer 0.127, orange 024.893 A/R Washer, spacer 0.131, uncoloured 023.749 A/R Washer, spacer 0.132 024.446 A/R Washer, spacer 0.197/0.199 024.447 A/R Washer, spacer 0.200/0.202 From CR5001/CF12501 024.448 A/R Washer, spacer 0.203/0.205 024.449 A/R Washer, spacer 0.206/0.208 26 023.425 2 Synchro ring 27 023.750 1 Synchronizer, 1st, 2nd, reverse To gbx no. CD19740 023.434 1 Synchronizer, 1st, 2nd, reverse From gbx no. CD19741 28 024.894 1 Outer gear, 1st, 2nd, reverse synchro hub 29 023.107 3 Ball 30 023.684 3 Spring To gbx no. CD19740 024.888 3 Spring From gbx no. CD19741 31 023.720 A/R Shim

>>> This text continues on next page

© V a n G e s t e l B & C 2 0 0 2

52 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

A-Type

J-Type

Standard

Gearbox internal parts

ILL N° PART N° QTY DESCRIPTION APPLICATION

32 023.745 A/R Washer, spacer 0.118, silver 023.746 A/R Washer, spacer 0.121, green 023.747 A/R Washer, spacer 0.124, blue 023.748 A/R Washer, spacer 0.127, orange 024.898 A/R Washer, spacer 0.131, uncoloured 023.749 A/R Washer, spacer 0.132, yellow 33 023.426 1 Bush, first gear, brass To CR1/CF1 023.793 1 Bush, first gear, steel From CR1/CF1 34 023.431 1 1st gear, 33 teeth, use with 023.463 To gbx no. CD20281 024.895 1 1st gear, 33 teeth, use with 023.463 From gbx no. CD20282 To CR5000/CF12500 023.433 1 1st gear, 32 teeth, use with 024.410 From CR5001/CF12501 35 023.461 1 Washer, between 1st gear and bearing 36 023.743 1 Mainshaft, standard, ‘imperial’ To gbx no. CD20281 024.883 1 Mainshaft, standard, ‘metric’ Gbx no. CD20282 to CD21768 023.772 1 Mainshaft, standard, ‘metric’ CD21768 to CR5000/12500 023.773 1 Mainshaft, standard, ‘metric’ From CR5001/12501 37 023.437 1 Mainshaft, overdrive, ‘A’ type, ‘imperial’ To gbx no. CD20281 024.884 1 Mainshaft, overdrive, ‘A’ type, ‘metric’ From gbx no. CD20282 38 023.439 1 Mainshaft, overdrive, ‘J’ type, ‘metric’ From CR1/CF1 39 023.428 1 Bearing, mainshaft centre 40 023.710 1 Circlip, locating 41 023.729 1 Washer, plain, bearing supporting 42 023.708 1/2 Circlip, bearing retaining Non ovd only 43 023.730 1 Washer, plain, bearing supporting 44 025.125 1 Bearing, mainshaft rear 45 023.731 1 Flange, square Non overdrive & A type interchangeable with 024.885 To gbx no. CD15651 46 024.885 1 Flange, round Non overdrive & A type interchangeable with 023.731 From gbx no. CD15652 024.886 1 Flange, round J type 47 163.117 1 Washer

ILL N° PART N° QTY DESCRIPTION APPLICATION

48 161.396 1 Nut, 3/4” UNF Slotted nut 49 161.721 1 Nut, Nylock 3/4”UNF Alternative 50 172.336 1 Split pin Use with 161.396 51 023.421 1 Thrust washer, front 52 023.430 2 Bearing, countershaft, “open cage” 53 023.462 2 Circlip Use with 023.430 54 023.752 2 Spacer 55 023.751 2 Bearing, countershaft, shell type Alternative. 56 - 1 Use gear set 023.714 To gbx no. CD20281 023.753 1 Constant gear Gbx no. CD20282 to CD21768 023.436 1 Constant gear From gbx no. CD21769 57 023.754 1 Distance piece 58 023.508 1 Countershaft gear, 3rd 59 023.755 1 Countershaft gear, 2nd To gbx no. CD30646 024.896 1 Countershaft gear, 2nd From gbx no. CD30647 60 023.463 1 Laygear, 1st & reverse To CR5000/CF12500 with 16 tooth first gear, use with 023.431 and 024.895 024.410 1 Laygear, 1st & reverse From CR5001/CF12501 with 17 tooth first gear use with 023.433 61 023.422 1 Thrust washer, rear 62 023.424 1 Layshaft 63 023.442 1 Plate 64 023.756 1 Screw 65 023.432 1 Reverse gear 66 023.760 1 Bush, reverse gear 67 023.757 1 Spindle 68 023.758 1 Lever 69 023.759 1 Fulcrum pin 70 161.337 1 Nut 71 163.080 1 Washer, plain

53© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

‘A’-Type

Overdrive components A type

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 020.203 1 Overdrive ass’y w/solenoid TR5, TR250 020.071 1 Overdrive ass’y w/solenoid, no. 22/61753 TR6 up to gbx no. CD15651 020.072 1 Overdrive ass’y w/solenoid, no. 22/61985 TR6 from gbx no. CD15652 2 025.426 1 Seal & gasket kit 3 023.437 1 Mainshaft To gbx no.CD20281 024.884 1 Mainshaft From gbx no. CD20282 4 081.281 1 Solenoid 5 081.294 1 Cover 6 025.439 1 Boot 7 016.057 1 Gasket 8 162.051 2 Screw 9 164.015 2 Washer, locking 10 025.155 1 Gear & spindle 11 025.156 1 ‘O’ ring 12 025.157 1 Bearing housing 13 016.050 1 Oil seal 14 162.792 1 Screw 15 168.028 1 Washer, copper, sealing screw 16 023.154 1 Angle drive 17 168.118 1 Washer, sealing 18 016.266 1 Gasket 19 025.162 1 Adaptor plate To gbx no. CD15651 025.413 1 Adaptor plate From gbx no. CD15652 20 165.691 6 Screw, ‘Locwel’ 162.086 6 Screw, plain Alternative 21 163.001 6 Washer, plain Use with ‘Locwel’ screw 22 164.002 6 Washer, locking Use with plain screw 23 016.296 1 Gasket 24 085.374 1 Nameplate, black Brass 085.375 1 Nameplate, black Aluminium 085.376 1 Nameplate, blue 25 165.693 2 Screw 26 025.198 1 Gasket 27 025.164 1 Bracket 28 011.376 1 Dowel 29 167.163 2 Stud 30 164.002 2 Washer, locking 31 161.002 2 Nut 32 165.694 2 Screw 33 164.002 2 Washer, locking 34 163.001 2 Washer, plain

ILL N° PART N° QTY DESCRIPTION APPLICATION 35 025.199 1 Stone shield 36 025.143 2 ‘O’ ring 37 025.200 1 Collar 38 025.201 1 Lever, actuating 39 025.202 1 Bolt 40 164.046 1 Washer, plain 41 161.723 1 Nut 42 165.695 1 Screw 43 161.724 1 Nut 44 167.011 4 Stud, upper 45 167.349 2 Stud, lower 46 161.002 6 Nut 47 164.002 6 Washer, locking 48 025.221 1 Annulus 50 025.124 1 Bearing, front 51 025.222 A/R Washer, adjusting 0.146" 025.223 A/R Washer, adjusting 0.151" 025.224 A/R Washer, adjusting 0.156" 025.225 A/R Washer, adjusting 0.161" 025.226 A/R Washer, adjusting 0.166" 52 025.125 1 Bearing, rear 53 023.415 1 Oil seal 54 023.731 1 Flange, square To gbx no. CD15651 55 024.885 1 Flange, round From gbx no. CD15652 56 163.117 1 Washer, plain 57 161.396 1 Nut 58 161.721 1 Nut Alternative 59 172.336 1 Split pin Use with slotted nut 60 025.229 1 Plug 61 167.160 2 Stud, 2.5/8" 62 167.162 1 Stud, 1" 63 167.161 3 Stud, 1.1/4" 64 161.002 6 Nut 65 164.002 6 Washer, locking 66 025.185 1 Shaft 67 025.186 1 Lever, adjustment 68 172.291 1 Mills pin 69 025.187 1 Cam

>>> This text continues on next page

© V a n G e s t e l B & C 2 0 0 2

54 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

‘A’-Type

Overdrive components A type

ILL N° PART N° QTY DESCRIPTION APPLICATION

70 025.188 1 Pin 71 025.184 1 Valve, operating 72 023.027 1 Ball 73 025.183 1 Plunger, operating valve 74 025.182 1 Spring, operating valve 75 168.019 1 Washer, sealing 76 025.181 1 Plug 77 025.166 1 Cam 78 025.167 1 Plunger, oil pump 79 025.042 1 Spring, pump plunger 80 025.416 1 Peg 81 025.168 1 Body, oil pump 82 164.015 2 Washer, locking 83 162.793 2 Screw 84 025.169 1 Plug 85 025.170 1 Filter To gbx no. CD15651; Serial No. 22/61753. 025.417 1 Filter From gbx no. CD15652; Serial No. 22/61985. 86 025.171 1 Magnet 87 025.174 1 Washer, fibre 88 025.176 1 Oil drain cap 89 023.107 1 Ball 90 025.183 1 Plunger, pump valve 91 025.182 1 Spring, pump valve 92 168.019 1 Washer, sealing 93 025.181 1 Plug 94 025.163 1 Housing 95 025.192 1 ‘O’ ring 96 025.193 1 Accumulator piston, with rings 97 025.194 1 Piston ring set 98 025.195 1 Spacing tube 99 025.196 1 Spring, accumulator To gbx no. CD15651; Serial No. 22/61753. 025.418 1 Spring, accumulator From gbx no. CD15652; Serial No. 22/61985. 100 025.197 A/R Washer, packing 101 025.244 1 Breather 102 025.179 2 Operating piston, with ‘O’ ring 103 025.105 2 ‘O’ ring

ILL N° PART N° QTY DESCRIPTION APPLICATION

104 025.217 1 Sunwheel assembly 105 025.205 1 Washer, thrust 106 025.206 A/R Washer, adjusting 0.113/0.114 025.207 A/R Washer, adjusting 0.107/0.108 025.208 A/R Washer, adjusting 0.101/0.102 025.209 A/R Washer, adjusting 0.095/0.096 025.210 A/R Washer, adjusting 0.089/0.090 025.211 A/R Washer, adjusting 0.083/0.084 025.212 A/R Washer, adjusting 0.077/0.078 107 025.218 1 Carrier assembly To gbx no. CD15651; Serial No. 22/61753. 025.419 1 Carrier assembly From gbx no. CD15652; Serial No. 22/61985. 108 025.230 1 Bearing, shaft & thrust washer kit 109 025.233 1 Bearing set 110 025.231 3 Thrust washer 111 025.219 1 Thrust washer 112 025.421 1 Clutch assembly, uni directional 113 025.034 1 Cage 114 025.036 1 Spring, cage locating 115 025.035 1 Roller set 116 025.069 1 Thrust washer, 0.125" 117 025.204 1 Brake ring 118 025.213 1 Ring assembly 119 025.203 1 Spring set 120 025.177 2 Bridge piece 121 174.016 4 Washer, tab, locking nut 122 161.019 4 Nut 123 174.016 4 Nut Alternative. 124 025.214 1 Circlip 125 025.215 1 Bearing clutch thrust ring 126 025.216 1 Circlip 127 025.423 1 Clutch assembly To gbx no. CD15651; Serial No. 22/61753. 025.424 1 Clutch assembly From gbx no. CD15652; Serial No. 22/61985. 025.159 1 Clutch assembly Alternative.

55© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Overdrive components J type

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 020.054 1 Overdrive assembly with solenoid P.I. CR1 to CR6701; Carb. CF1 to CF35000 025.427 1 Overdrive assembly with solenoid CF35001 on; Serial No. 25/115876. 2 025.438 1 Seal & gasket set 3 024.320 1 Adaptor 4 016.266 1 Gasket 5 162.096 6 Screw 6 164.002 6 Washer, locking 7 161.002 8 Nut 8 164.007 8 Washer, locking 9 167.340 2 Stud, overdrive to chassis mounting 10 164.006 2 Washer, locking 11 161.026 2 Nut 12 023.439 1 Mainshaft 13 025.271 1 Cam 14 172.005 1 Key 15 025.051 1 Circlip 16 025.446 1 Spring ring 17 023.154 1 Angle drive 18 168.118 1 Washer, sealing 19 085.377 1 Nameplate, blue 20 025.275 2 Screw 21 025.228 1 Solenoid & valve 22 025.153 1 Washer, copper 23 025.147 2 ‘O’ ring 24 025.304 1 Wire 25 161.491 6 Nut 26 164.065 4 Washer, locking 27 163.161 2 Washer, plain 28 025.368 1 Pinion & gear assembly

ILL N° PART N° QTY DESCRIPTION APPLICATION

29 025.154 1 ‘O’ ring 30 016.050 1 Oil seal 31 025.158 1 Retainer 32 162.895 1 Screw 164.007 1 Washer, locking 33 025.235 1 Housing 34 025.125 1 Bearing, annulus tail 35 025.126 1 Oil seal 36 024.886 1 Flange 37 163.162 1 Washer 38 161.303 1 Nut 39 016.167 1 Gasket 40 167.177 6 Stud, front, 1 1/4" P.I. CR1 to CR6701 Carb. CF1 to CF35000 Serial No. 25/115838 167.350 6 Stud, front, 1 3/8" Carb. CF35001 on. Serial No. 25/115876 41 167.178 2 Stud, front, 1" P.I. CR1 to CR6701 Carb. CF1 to CF35000 Serial No. 25/115838 167.030 2 Stud, front, 1" Carb. CF35001 on Serial No. 25/115876 42 167.179 4 Stud, rear, 2 3/4" 43 167.180 2 Stud, rear, 3 1/8" 44 025.270 2 Operating piston 45 025.087 2 ‘O’ ring 46 025.429 1 Plug 47 025.430 1 Spring 48 025.431 1 Ball

>>> This text continues on next page

Pump

Non return valve

Dashpot

‘J’-Type

© V a n G e s t e l B & C 2 0 0 2

56 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Overdrive components J type

ILL N° PART N° QTY DESCRIPTION APPLICATION

49 025.273 1 Cover 50 025.109 2 Magnet set 51 025.151 1 Gasket 52 162.475 6 Screw 53 164.016 6 Washer, locking 54 025.272 1 Plug 55 025.148 1 Washer 56 025.150 1 Filter 57 025.149 1 Filter 58 025.432 1 Plug 59 025.152 1 Washer, sealing plug 60 025.284 1 Dashpot plug kit 61 025.144 1 ‘O’ ring 62 025.283 1 Dashpot piston 63 025.433 1 Relief valve 64 025.282 1 Spring 65 025.280 1 Dashpot sleeve 66 025.279 1 ‘O’ ring 67 025.278 1 Body 68 025.279 1 ‘O’ ring, large 69 025.086 1 ‘O’ ring, small 70 025.092 1 Non-return valve kit 71 025.093 1 Pump plug 72 025.083 1 ‘O’ ring 73 025.277 1 Pump body 74 025.146 1 ‘O’ ring 75 025.276 1 Pump plunger 76 025.291 1 Sunwheel 77 025.292 1 Planet gear & carrier 78 025.113 1 Bearing & spindle kit

ILL N° PART N° QTY DESCRIPTION APPLICATION

79 025.434 1 Clutch assembly, uni directional 80 025.294 1 Inner member 81 025.034 1 Cage 82 025.036 1 Spring 83 025.035 1 Roller set 84 025.293 1 Oil thrower 85 025.067 1 Circlip 86 025.295 1 Thrust washer 87 025.286 1 Brake ring 88 016.402 1 Gasket 89 016.403 1 Gasket 90 025.177 2 Bridge piece 91 161.027 4 Locknut 92 025.234 1 Clutch assembly 93 025.290 1 Bearing housing 94 162.894 4 Bolt 95 025.165 1 Bearing, clutch 96 025.305 1 Operating spring set 97 025.289 1 Circlip 98 025.288 1 Circlip 99 025.287 1 Circlip 100 025.296 1 Annulus 101 025.124 1 Bearing, annulus head 102 025.435 1 Gear, speedo drive P.I. CR1 to CR6701 Carb. CF1 to CF35000 Serial No. 25/115838 025.436 1 Gear, speedo drive Carb. CF35001 on Serial No. 25/115876 103 025.299 1 Spacer

Pump

Non return valve

Dashpot

‘J’-Type

57© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Overdrive conversions and controls

ILL N° PART N° QTY DESCRIPTION APPLICATION

Converting to ‘A’ type overdrive. 1 020.076 1 Gearbox for ‘A’ overdrive 2 020.071 1 Overdrive ass’y w/solenoid 3 016.266 1 Gasket 4 025.162 1 Adaptor plate 5 016.296 1 Gasket 6 023.437 1 Mainshaft To CD20281 024.884 1 Mainshaft CD20282 on 7 025.166 1 Cam 8 162.086 6 Screw 9 164.002 6 Washer, spring 10 164.002 6 Washer, spring 11 161.002 6 Nut 12 025.203 1 Spring set, 8 pieces 13 020.189 1 Top cover 14 025.155 1 Gear & spindle 15 025.156 1 ‘O’ ring 16 025.157 1 Bearing housing 17 016.050 1 Oil seal 18 162.792 1 Screw 19 168.028 1 Washer, copper 20 023.154 1 Angle drive 21 168.118 1 Washer, sealing 22 134.043 1 Speedometer cable ‘A’ Type Overdrive Controls 23 083.615 1 LHD overdrive switch 083.879 1 RHD overdrive switch 24 043.139 1 Escutcheon 25 086.149 1 Relay 26 162.139 2 Screw 27 163.013 2 Washer, plain 28 164.015 2 Washer, spring 29 161.024 2 Nut 30 081.281 1 Solenoid 31 016.057 1 Gasket 32 162.051 2 Screw 33 164.015 2 Washer, spring 34 080.129 1 Loom, on gearbox 35 083.041 4 Cable connector, single 36 080.128 1 Loom, on body 37 122.193 1 Grommet 38 172.508 1 ‘P’ clip 39 083.052 3 Isolator switch 40 168.129 A/R Washer, adjusting

ILL N° PART N° QTY DESCRIPTION APPLICATION

Converting to ‘J’ type overdrive 41 020.075 1 Gearbox for ‘J’ overdrive 42 020.054 1 Overdrive ass’y w/solenoid 43 016.266 1 Gasket 44 024.320 1 Adaptor 45 016.167 1 Gasket 46 023.439 1 Mainshaft 47 025.271 1 Cam 48 172.005 1 Key 49 162.096 6 Screw 50 164.002 6 Washer, spring 51 161.002 8 Nut 52 164.007 8 Washer, spring 53 020.190 1 Top cover 54 167.340 2 Stud 55 164.006 2 Washer, spring 56 161.026 2 Nut 57 025.368 1 Pinion & gear assembly 58 025.235 1 Speedo drive housing 59 025.158 1 Retainer 60 162.895 1 Screw 61 164.007 1 Washer, spring 62 023.154 1 Angle drive 63 168.118 1 Washer, sealing 64 134.043 1 Speedometer cable

‘J’ Type Overdrive Controls 65 083.615 1 LHD overdrive switch 083.879 1 RHD overdrive switch 66 043.139 1 Escutcheon 67 025.228 1 Solenoid & valve 68 025.153 1 Washer, copper 69 025.147 2 O’ ring 70 025.304 1 Earth wire 71 080.130 1 Loom, on gearbox 72 083.041 4 Cable connector, single 73 080.355 1 Loom, on body 74 122.193 1 Grommet 75 172.025 1 ‘P’ clip 76 083.052 2 Isolator & reverse light switch 77 168.129 A/R Washer, adjusting

Conversion bracket kits 78 136.421 1 Bracket kit, convert TR6 ‘J’ type overdrive to fit TR2 to TR6 ‘A’ type chassis. 79 136.422 1 Bracket kit, convert TR2 to TR6 ‘A’ type overdrive gearbox to fit later ‘J’ type chassis. Early type gearbox mounting part no. 011.152 is also required. 80 136.423 1 Bracket kit, convert Triumph saloon ‘A’ type overdrive to fit TR6 ‘J’ type chassis. 81 136.424 1 Bracket kit, convert Triumph saloon ‘A’ type overdrive to fit TR2 to TR6 ‘A’ type mounting. Small modification rear case needed.

‘A’-Type ‘J’-Type

© V a n G e s t e l B & C 2 0 0 2

58 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Propshaft and driveshaft

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 134.318 1 Propshaft assembly 2 032.392 2 Yoke 3 032.194 2 Universal joint 4 032.046 2 Grease nipple 5 041.068 A/R Grease nipple 6 162.653 8 Bolt, propshaft 7 161.337 8 Nut, nyloc 9 030.060 2 Axle shaft assembly 11 032.392 2 Yoke 12 032.225 2 Gaiter, inner joint 13 032.228 2 Gaiter, sliding joint 14 027.154 4 Wire clip 15 032.194 4 Universal joint 16 041.405 4 Grease nipple 17 032.398 2 Rear Hub assembly, less wheel nuts 18 032.221 2 Drive flange, disc wheels Less studs 19 167.078 8 Stud, disc wheels 167.119 8 Stud, wire wheels 20 032.397 2 Bearing kit 21 032.216 2 Oil seal, outer 22 032.233 2 Bearing, outer 23 032.452 2 Hub housing 24 032.232 2 Spacer, collapsable 25 032.227 2 Bearing, inner 26 032.215 2 Oil seal, inner 27 032.234 2 Spacer 28 032.229 2 Stoneguard

ILL N° PART N° QTY DESCRIPTION APPLICATION

29 161.432 2 Adjusting nut 30 174.039 2 Tab washer 31 161.431 2 Nut, locking 32 032.222 2 Outer shaft 33 172.427 2 Key 34 161.334 2 Nut, nyloc P.I. to CR5390 & Carb. to CF15750. 35 161.407 2 Nut, slotted P.I. CR5391 on & 36 172.337 2 Split pin Carb. CF15751 on. 37 163.291 2 Washer, plain 38 167.106 12 Stud 39 163.001 12 Washer, plain 40 161.012 12 Nut, nyloc 41 162.653 8 Bolt, flange 42 161.337 8 Nut, nyloc 43 161.288 8 Wheel nut, disc wheel P.I. to CP50000 & Carb. to CC50000. 44 185.685 1 Wheel nut kit, chrome P.I. CP50001 on & 185.686 1 Wheel nut kit, stainless Carb. CC50001 on. 45 161.291 8 Wheel nut, chrome 161.725 8 Wheel nut, stainless 46 164.049 8 Washer, plastic 47 161.123 8 Nut, wire wheels 48 042.131 1 LH hub, Wire wheels 042.130 1 RH hub, Wire wheels 49 200.604 1 Grease pump 50 186.021 1 Cartridge grease Castrol

50

49

Early outer shaft

Later outer shaft

59© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Rear axle and differential

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 030.168 1 Differential assembly rebuild TR250 to rear axle CTC4261. 3.7:1 exchange unit 2 032.386 1 Rear cover 3 020.197 1 Rear bracket 4 167.072 4 Stud 5 163.290 4 Washer, plain 6 163.005 4 Washer, plain 7 161.025 4 Nut, nyloc 8 020.198 1 Differential assembly rebuild P.I. models. 3.45 :1 exchange unit 020.200 1 Differential assembly rebuild TR250 fitted from rear axle 3.7:1 exchange unit no. CTC6242; TR6 carb. models 9 032.387 1 Rear cover TR250 fitted from rear 10 016.268 1 Gasket, rear cover Axle no. CTC6242; TR5; TR6 11 162.020 8 Screw 12 164.002 8 Washer, locking 13 030.059 1 Housing 14 162.748 4 Bolt, bearing cap 15 164.006 4 Washer, locking 16 032.463 2 Dowel 17 011.341 1 Plug, filler 18 032.388 1 Plug, breather 19 172.294 1 Split pin 20 032.454 1 Plate assembly 21 032.911 1 Washer, distance 22 162.763 4 Bolt 23 164.033 4 Washer, shakeproof 24 011.341 1 Plug, drain 25 032.464 1 Crown wheel & pinion P.I. models to CP52867 3.45:1, uses solid spacer 032.220 1 Crown wheel & pinion Carb. models to CC61570. 3.7:1, uses solid spacer

ILL N° P ART N° QTY DESC RIPTION APPLICATION

032.915 1 Crown wheel & pinion P.I. CP52868 on 3.45:1, uses collapsible spacer 032.916 1 Crown wheel & pinion Carb. CC61571 on 3.7:1, uses collapsible spacer 26 032.365 1 Spacer, solid To CP52867/CC61570. 27 032.547 A/R Shim, 0.003" 032.304 A/R Shim, 0.005" 032.305 A/R Shim, 0.010" 28 032.466 1 Spacer, collapsible CP52868/CC61571 on 29 031.003 1 Bearing, pinion, rear 30 032.300 A/R Shim, 0.003" 032.301 A/R Shim, 0.005" 032.302 A/R Shim, 0.010" 31 032.917 A/R Washer, adjusting, 0.040" 32 032.238 1 Bearing, pinion, front 33 032.218 1 Seal, oil, pinion flange, leather 34 032.367 1 Flange To CP52867/CC61570 032.467 1 Flange CP52868/CC61571 on 35 032.918 1 Washer, flange To CP52867/CC61570 032.180 1 Washer, flange CP52868/CC61571 on 36 161.415 1 Nut, slotted To CP52867/CC61570 37 032.919 1 Wire, locking 38 161.416 1 Nut, nyloc CP52868/CC61571 on 39 023.809 1 Shield 40 030.058 1 Carrier 41 162.747 10 Bolt 42 164.053 10 Washer, locking 43 032.290 2 Bearing, carrier

>>> This text continues on next page

Late TR250,

TR5TR6

Early TR250

TR250to rear axleCTC4261

Chassis reinforcement

© V a n G e s t e l B & C 2 0 0 2

60 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Rear axle and differential

ILL N° PART N° QTY DESCRIPTION APPLICATION

44 032.240 A/R Shim, 0.003" 032.241 A/R Shim, 0.005" 032.242 A/R Shim, 0.010" 45 032.920 2 Side gear, 16 teeth, plain Replace in pairs 032.377 2 Side gear, 16 teeth, machined groove Replace in pairs 46 032.352 2 Washer, thrust 47 032.465 2 Pinion gear, 10 teeth, plain Replace in pairs 032.378 2 Pinion gear, 10 teeth, machined groove Replace in pairs 48 032.354 A/R Thrust washer, 0.046/0.049" 032.381 A/R Thrust washer, 0.049/0.051" 032.355 A/R Thrust washer, 0.051/0.053" 032.382 A/R Thrust washer, 0.053/0.055" 032.356 A/R Thrust washer, 0.055/0.057" 032.383 A/R Thrust washer, 0.057/0.059" 032.357 A/R Thrust washer, 0.059/0.061" 032.384 A/R Thrust washer, 0.061/0.063" 032.358 A/R Thrust washer, 0.063/0.065" 032.359 A/R Thrust washer, 0.065/0.067" 032.360 A/R Thrust washer, 0.067/0.069" 032.385 A/R Thrust washer, 0.069/0.071" 032.361 A/R Thrust washer, 0.071/0.073" 49 032.362 1 Pinion shaft 50 032.363 1 Pin, pinion shaft locking 51 032.299 1 Inner axle shaft, LH Uses nyloc nut 032.298 1 Inner axle shaft, RH 032.923 1 Inner axle shaft, LH 032.922 1 Inner axle shaft, RH Uses castle nut 52 032.230 2 Bearing, axle shaft

ILL N° PART N° QTY DESCRIPTION APPLICATION

53 032.314 2 Housing, oil seal 54 032.217 2 Oil seal 55 162.005 8 Screw 56 164.002 8 Washer, locking 57 032.316 2 Flange, driving 58 032.925 2 Stoneguard 59 032.315 2 Key 60 032.317 2 Washer 61 161.334 2 Nut, nyloc Late type 62 161.407 2 Nut, slotted Early type 63 172.337 2 Split pin Early type 64 032.231 2 Mounting, rear 65 162.128 4 Bolt 66 163.008 4 Washer, plain 67 161.330 4 Nut, nyloc 68 032.204 4 Washer, special 69 161.337 4 Nut, nyloc 70 032.205 2 Mounting, front upper 71 032.206 2 Mounting, front lower 72 032.204 4 Washer, special 73 161.337 4 Nut, nyloc 74 137.479 2 Reinforcement kit, front Axle mounting, front 75 167.158 2 Stud, front 76 137.480 2 Reinforcement kit, rear Axle mounting, rear 77 162.765 2 Stud, rear 78 300.118 2 1L. hypoid oil 85W/140 PENRITE Capacity is 1.42 litres up to CP52867/CC61570 and 1.27 L. from CP52868/CC61571.

Late TR250,

TR5TR6

Early TR250

TR250to rear axleCTC4261

Chassis reinforcement

61© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Wheels

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 046.064 5 Steel wheel, 4.5 x 15" P.I. models to CP50000; 046.065 5 Steel wheel, 5.5 x 15" Carb. models to CC50000 2 161.288 16 Wheel nut 3 141.559 4 Hub cap, rostyle 4 046.066 5 Steel wheel, 5.5 x 15" P.I. models from CP50001; Carb. models from CC50001 5 185.685 1 Nut & washer kit, chrome 185.686 1 Nut & washer kit, stainless 6 161.291 16 Wheel nut, chrome 161.725 16 Wheel nut, stainless 7 164.049 16 Washer, plastic 8 167.064 8 Wheel stud, front 167.078 8 Wheel stud, rear 9 141.386 4 Centre cap, with sticker 10 085.146 4 Sticker, ‘TR6’ 11 161.024 4 Nut 12 164.015 4 Washer, locking 13 171.019 16 Spring, cap 14 132.593 4 Hub cap, black P.I. models to CR1; Carb. models to CF1 132.592 4 Hub cap, grey P.I. models from CR1; Carb. models from CF1 15 140.239 1 Wheel trim kit, aluminium 140.188 1 Wheel trim kit, stainless 16 046.004 5 Painted wire wheel, 15"x4.5, 60 spoke 046.005 5 Chrome wire wheel, 15"x4.5, 60 spoke 046.022 5 Painted wire wheel, 15"x5.5, 72 spoke 046.023 5 Chrome wire wheel, 15"x5.5, 72 spoke 17 169.007 A/R Short spoke for 046.004 169.009 A/R Short spoke for 046.005 169.033 A/R Short spoke for 046.022 169.035 A/R Short spoke for 046.023

ILL N° PART N° QTY DESCRIPTION APPLICATION

18 169.008 A/R Long spoke for 046.004 169.010 A/R Long spoke for 046.005 169.034 A/R Long spoke for 046.022 169.036 A/R Long spoke for 046.023 19 169.001 A/R Nipple, bare metal 169.002 A/R Nipple, chrome 20 042.072 4 LH spinner, two eared 042.071 4 RH spinner, two eared 21 042.080 4 LH spinner, octagonal 042.079 4 RH spinner, octagonal 22 042.084 4 LH spinner, three eared 042.083 4 RH spinner, three eared 23 042.131 2 LH Wire wheel hub 042.130 2 RH Wire wheel hub 24 161.123 16 Special nut, double cone 25 167.065 8 Wheel stud, front 167.119 8 Wheel stud, rear 26 042.731 A/R Solid spacer, 6mm, pair 27 047.005 5 Inner tube, 15" x 165 tyre 28 047.072 5 Rim band, 15" 29 161.476 5 Valve cap, nickel plated 30 046.067 5 Minilite’ replica, 15" x 5.5", silver 046.118 5 Minilite’ replica, 15" x 6", silver 31 133.476 5 Hub cap, silver 32 161.472 16 Wheel nut, for 046.067 and 046.118 33 046.024 5 Centre lock alloy wheel, 15" x 5.5", silver 34 046.132 5 Revolution’ alloy wheel, black/silver, 15" x 6" 046.133 5 Revolution’ alloy wheel, black/silver, 15" x 7" 35 161.726 16 Wheel nut, for 046.132 and 046.133 36 198.006 1 Clean wheels, “Autoglym” 37 187.012 1 Silicone spray, to protect chrome 38 186.034 1 High temperature grease

© V a n G e s t e l B & C 2 0 0 2

62 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Steering

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 043.087 1 Gaiter set with clips 2 043.106 2 Track rod end 3 042.430 1 LHD steering rack assembly 042.431 1 RHD steering rack assembly 4 161.281 1 Nut, steering wheel 5 163.061 1 Washer, plain 6 043.758 1 Upper, outer column, P.I. to CP52785; without steering lock Carb. to CC50001 043.749 1 Upper, outer column, P.I. to CP52785; with steering lock Carb. to CC50001 134.250 1 LHD upper, outer column P.I. CP52786 on Carb. CC50001 on 043.750 1 RHD upper, outer column P.I. CP52786 on 7 043.246 1 Clip, turn signal 8 043.227 1 Upper, inner column 9 043.225 1 Clamp, column 10 174.053 1 Plate, locating 11 162.661 1 Screw 12 161.298 1 Nut, half 13 162.208 2 Bolt, 1/4" X 1 1/4" 162.008 2 Bolt, 5/16" X 1 1/8" 14 164.002 2 Washer, locking 15 043.751 1 Lower column 16 043.249 1 Coupling assembly, aftermarket 17 043.247 1 Flexible coupling, early 043.131 1 Flexible coupling, late, both are interchangeable 18 162.738 4 Bolt, hexagon, early coupling 162.738 2 Bolt, hexagon, late coupling 162.662 2 Bolt, socket, late coupling 19 043.759 1 Clamp for 5/16" dia. bolts P.I. to CP75371; Carb. to CC77477 043.248 1 Clamp for 1/4" dia. bolts P.I. CP75372 on; Carb. CC77478 on 20 162.481 1 Bolt, 5/16" 162.485 1 Bolt, 1/4" 21 161.021 1 Nut, 5/16" 161.061 Nut, 1/4" 22 163.287 1 Washer, plain 23 043.143 1 Earth strap 24 027.154 A/R Wire 25 043.130 1 Universal joint 26 162.008 2 Bolt 27 161.012 2 Nut, self locking 28 163.001 2 Washer, plain 30 043.128 1 Bush, passenger side 31 043.747 1 Cover 32 134.252 1 Rack bar 33 043.250 1 Plug, nylon 34 043.107 2 Ball joint assembly

ILL N° PART N° QTY DESCRIPTION APPLICATION

35 043.265 2 Housing, ball 36 043.148 2 Tie rod 37 043.145 2 Socket 38 043.213 A/R Shim, 0.002" 043.748 A/R Shim, 0.004" 043.212 A/R Shim, 0.010" 39 043.127 2 Tab washer 40 043.266 2 Sleeve adaptor 41 043.267 2 Spring 42 043.309 2 Nut, half 43 172.557 2 Clip, tie rod 44 172.114 1 Clip, body 45 172.477 1 Wire, housing 46 043.029 2 Boot, dust 47 041.222 2 Clip 48 161.079 2 Nut, nyloc 49 164.054 2 Washer, plain 50 161.290 2 Nut, half 51 043.198 1 Pinion bush, lower 52 043.251 1 Thrust washer, lower 53 043.252 1 LHD pinion 043.253 1 RHD pinion 54 043.200 1 Thrust washer, upper 55 043.199 1 Pinion bush, upper 56 043.255 A/R Shim, 0.005" 043.256 A/R Shim, 0.010" 57 043.257 1 Plug 58 043.196 1 ‘O’ ring 59 043.254 1 Pin 60 043.258 1 Circlip 61 043.224 1 Plunger 62 043.259 1 Spring 63 043.260 A/R Shim, 0.002" 043.261 A/R Shim, 0.004" 043.262 A/R Shim, 0.010" 64 043.263 1 Cap 65 043.264 1 Plug, grease 66 032.313 1 Nipple, grease 67 041.536 2 Clamp assembly TR5; TR250; early TR6 041.155 2 Clamp assembly TR6 68 041.154 2 Mounting, rubber 69 041.156 2 Plate 70 163.001 4 Washer, plain 71 161.012 4 Nut, nyloc 72 300.118 1 1 L steering rack oil, do not use grease 73 080.146 1 Earth lead 74 200.438 1 Track rod separator tool 75 042.444 1 Solid rack mounting kit

63© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Steering wheels and outer column

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 042.965 1 Steering wheel. TR5 & TR250. 2 086.070 1 Centre pad 3 042.966 1 Steering wheel TR6 P.I. to CP50000 & 4 042.967 1 Centre pad TR6 Carb. to CC50000. 5 042.968 1 Steering wheel & centre pad TR6 P.I. CP50001 to CR1 & 6 042.969 1 Steering wheel TR6 Carb. CC50001 to CF1. 185.272 1 Leather steeringwheel rim Supplied less boss 7 042.970 1 Centre pad 8 042.577 1 Steering wheel & centre pad P.I. CR1 on & Carb. CF1 on. 9 042.971 1 Steering wheel 185.272 1 Leather steeringwheel rim Supplied less boss 10 083.561 1 Centre pad 11 161.281 1 Nut 12 163.061 1 Washer, plain 13 083.799 1 Horn push & TR shield P.I. up to CR1 & Carb. up to CF1. 14 083.780 1 Horn push & Triumph P.I. CR1 on & Carb. CF1 on. 15 083.606 1 Clip, horn push retaining P.I. up to CR1 & Carb. up to CF1. 16 172.165 1 Clip, horn push retaining P.I. CR1 on & Carb. CF1 on. 17 083.301 1 Brush, 66 mm long, ‘A’=40 mm As fitted, check length. 083.774 1 Brush, 86 mm long, ‘A’=60 mm 18 Info see page 155 19 Info see page 155 20 Info see page 155 21 042.973 1 Steering column , outer tube P.I. to CP50000 & without steering locks. Carb. to CC50000. 042.974 1 Steering column , outer tube P.I. to CP50000 & with steering locks. Carb. to CC50000. 134.249 1 Steering column , outer tube P.I. CP50001 on & Carb. CC50001 on. 22 083.560 1 Slip ring assembly 23 080.339 1 Cable 24 083.552 1 Insulator 25 043.089 2 Bush 26 043.204 1 End cap 27 043.243 1 Washer, nylon 28 043.137 1 Grommet P.I. to CP75000 & Carb. to CC75000. 043.146 1 Seal TR6 P.I. CP75001 to CR1 & TR6 Carb. CC75001 to CF1. 29 043.147 2 Seal P.I. CR1 on & Carb. CF1 on. 30 043.754 1 RHD retainer 043.753 1 LHD retainer

ILL N° PAR T N° QTY DESCRIPTION APPLICATION 31 135.035 1 Cover for cables 32 162.717 1 Screw 33 163.013 1 Washer, plain 34 164.015 1 Washer, locking 35 161.024 1 Nut 36 043.245 1 Clamp 37 043.215 1 Felt strip, long 38 043.216 1 Felt strip, short 39 135.036 1 Tie rod P.I. to CP50000 & without steering locks. Carb. to CC50000. 137.477 1 LH tie rod P.I. to CP50000 & 137.476 1 RH tie rod Carb. to CC50000. with steering locks. 40 174.061 1 Tie rod P.I. CP50001 on & Carb. CC50001 on. 41 162.077 2 Screw Without steering lock fitted. 162.147 2 Screw With steering lock fitted. 42 163.010 2 Washer, plain 43 164.012 2 Washer, locking 44 161.019 2 Nut 45 135.039 1 Clamp, rear, lower 46 043.217 1 Felt strip, lower 47 135.038 1 Clamp, rear, upper 48 043.244 1 Spring 49 161.019 2 Nut 50 161.362 2 Nut, half 51 162.020 2 Screw Without steering lock. 162.577 2 Screw With steering lock. 52 164.002 2 Washer, locking Without steering lock. 163.001 2 Washer, plain With steering lock. 53 161.002 2 Nut Without steering lock. 161.012 2 Nut, nyloc With steering lock. 54 122.421 2 Cover 55 137.478 1 Tie rod, upper Without steering lock. 56 162.077 1 Screw 57 133.939 1 Washer, plain 58 164.012 1 Washer, locking 59 161.019 1 Nut 60 162.029 1 Screw, blanking 61 164.012 1 Washer, locking 62 163.009 1 Washer, plain

© V a n G e s t e l B & C 2 0 0 2

64 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

RHDLHD

Neiman 1967-’70 Waso 1970-’73 Waso 1973 onWaso 1973 onwithout switch

Steering column cowl, switches and labels

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 043.138 1 Cowl, lighting 2 043.138 1 Cowl, indicator 3 043.139 1 Cowl, indicator & overdrive With overdrive 4 162.494 2 Screw 5 161.316 2 Nut, fix 6 085.211 1 Label set, 6 pieces LHD or RHD 7 085.131 1 RHD indicator switch label 8 085.128 1 LHD indicator switch label 9 085.132 1 RHD lighting switch label P.I. up to CR1 & Carb. up to CF1 10 085.129 1 LHD lighting switch label 11 085.133 1 RHD lighting switch label P.I. CR1 on & Carb. CF1 on 12 085.130 1 LHD lighting switch label 13 083.427 1 Lighting switch 083.302 1 Switch lighting & headlamp P.I. CR1 on & Carb. CF1 on dip main beam and flash 14 083.303 1 Switch direction indicator 15 162.774 4 Screw 16 164.056 4 Washer, shakeproof 17 083.615 1 LHD overdrive switch 083.879 1 RHD overdrive switch

ILL N° PART N° QTY DESCRIPTION APPLICATION

18 086.147 1 Bezel 19 164.110 1 Washer, shakeproof 20 150.930 1 Crash pad 21 135.272 1 Clip, Waso locks 043.331 1 Clip, Wilmot Breeden locks P.I. CP50001 on & 22 163.013 1 Washer, plain Carb. CC50001 on 23 164.015 1 Washer, locking 24 161.024 1 Nut 25 043.298 1 Steering lock & switch, Neimen P.I. to CP50000 & Carb. to CC50000 26 141.250 1 Steering lock & switch, Waso P.I. CP50001 to CR5000 & Carb. CC50001 to CF12500 27 086.124 1 Switch with lucar connectors 28 141.251 1 Steering lock & switch, Waso P.I. CR5001 on 043.755 1 Steering lock & switch, Waso Carb. CF12501 on 29 083.307 1 Switch with loom and plug P.I. CR5001 on 043.756 1 Switch with loom and plug Carb. CF12501 on 30 043.757 1 Steering lock, less switch P.I. CP50001 on & 31 165.908 1 Screw Carb. CC50001 on 32 162.392 2 Bolt, shear

65© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Front suspension • part one

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 042.284 2 Front coil spring, standard 042.515 2 Front coil spring, uprated 2 042.271 4 Rubber collar 3 042.425 2 Spax adjustable shock absorber 042.438 2 Koni adjustable shock absorber 042.285 2 Standard shock absorber 4 041.231 4 Bush for standard shock absorber 041.779 4 Polyurethan bush 5 041.384 2 Washer, plain, upper 6 041.383 2 Washer, plain, lower 7 161.026 2 Nut 8 161.009 2 Nut, half 9 041.101 2 Lower mounting rubber 041.490 2 Polyurethan bush, lower 10 041.219 4 Bracket 11 162.276 2 Bolt 12 161.338 2 Nut 13 041.110 2 Bearing kit, oil seal and two bearings 14 042.278 1 RH vertical link 042.279 1 LH vertical link 15 041.343 2 Grease nipple 16 042.255 1 RH lever, tie rod 042.256 1 LH lever, tie rod 17 041.196 4 Distance piece 18 161.025 4 Nut, nyloc 19 162.477 2 Bolt, lever mounting, upper rear 20 162.038 2 Bolt, lever mounting, upper front 21 174.024 4 Tab washer 22 042.259 1 RH mounting plate, caliper 042.260 1 LH mounting plate, caliper 23 162.659 2 Bolt, plate to vertical link, lower rear 24 162.056 2 Bolt, plate to vertical link, lower front 25 161.337 2 Nut, nyloc 26 163.005 2 Washer, plain 27 042.261 2 Stub axle 28 041.197 2 Oil seal 29 041.198 2 Bearing, inner 30 041.199 2 Bearing, outer 31 161.339 2 Nut, stub axle 32 163.118 2 Washer, stub axle 33 041.111 2 D’ washer 34 041.032 2 Nut 35 172.316 2 Split pin

ILL N° PART N° QTY DESCRIPTION APPLICATION

36 041.151 2 Grease cap 37 042.263 2 Hub, less studs 38 167.064 16 Stud, disc wheels 39 167.065 16 Stud, wire wheels 40 161.123 16 Nut, wire wheel hub fixing 41 161.288 16 Nut, disc wheel P.I. to CP50000 & Carb. to CC50000 42 185.685 1 Wheel nut kit, chrome, car set P.I. CP50001 on & 185.686 1 Wheel nut kit, stainless, car set Carb. models CC50001 on 43 161.291 16 Wheel nut, chrome 161.725 16 Wheel nut, stainless 44 164.049 16 Plastic washer 45 042.130 1 RH hub, wire wheels 042.131 1 LH hub, wire wheels 46 132.570 1 Radiator protection shield 47 162.524 2 Screw 48 164.006 2 Washer, spring 49 161.026 2 Nut 50 135.249 2 Bracket, bumper support Carb. CF35001 on 51 162.005 4 Screw 52 164.002 4 Washer, spring 53 163.001 4 Washer, plain 54 041.386 2 Bracket, mounting, link to wishbone 55 041.385 2 Distance piece 56 041.347 2 Link assembly 57 041.348 4 Washer 58 041.349 4 Washer 59 041.350 4 Rubber bush 041.504 2 Polyurethan bush assemby 60 041.351 2 Distance piece 61 161.025 2 Nut, nyloc 62 163.009 4 Washer, plain 63 161.079 2 Nut, nyloc 64 042.397 1 Bar, anti-roll 65 042.976 1 Fitting kit, bar anti-roll 66 041.102 2 Rubber bush 041.503 2 Polyurethan bush, anti-roll 67 041.104 2 Clamp 68 041.319 2 ‘U’ bolt 69 041.106 2 ‘U’ bolt, with towing eyes 70 163.287 4 Washer, plain 71 161.012 4 Nut, nyloc 72 041.997 1 Suspension bolting kit 194 pcs

Kit

66© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Kit suspensionfasteners

194 pieces

Front suspension • part two

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 042.292 1 Complete rebushing kit for both sides 042.639 1 Complete rebushing kit uprated with improved steel bushes and sintered bronze bushes. Bolts not included. 2 042.245 2 Ball joint assembly 3 041.194 2 Boot, dust 4 041.222 2 Clip, boot 5 163.118 2 Washer, plain 6 161.017 2 Nut, nyloc 7 041.068 2 Grease nipple 8 042.239 2 Fulcrum pin, upper 9 162.072 8 Screw, fulcrum to chassis 10 164.006 8 Washer, spring 11 042.242 2 Arm, upper front 12 042.243 2 Arm, upper rear 13 041.193 8 Bush, rubber 041.501 4 Polyurethan bush 14 163.143 4 Washer 15 161.043 4 Nut 16 172.323 4 Split pin 17 162.432 4 Bolt, ball joint 18 163.005 4 Washer, plain 19 161.025 4 Nut, nyloc 20 042.275 1 RH bottom trunnion 042.276 1 LH bottom trunnion 21 041.203 2 Dust cap, rubber 22 162.430 2 Bolt, pivot 23 161.297 2 Nut 24 172.336 2 Split pin 25 162.542 4 Bolt, wishbone arm to bracket

ILL N° PART N° QTY DESCRIPTION APPLICATION

26 161.017 4 Nut, nyloc 27 041.229 4 Bush, rubber with steel guide 041.502 4 Polyurethan bush 28 041.336 4 Bracket, wishbone arm to chassis 29 041.230 A/R Shim, bracket to chassis 30 163.005 8 Washer, plain 31 161.025 8 Nut, nyloc 32 042.280 2 Wishbone arm, RH front or LH rear 33 042.281 2 Wishbone arm, LH front or RH rear 34 041.224 4 Distance tube 35 041.225 8 Nylon bearing 36 041.226 8 Washer, thrust 37 041.227 8 Sealing ring 38 041.228 8 Washer, cup 39 162.483 2 Bolt, stop 40 164.002 2 Washer, spring 41 041.235 2 Stop, steering end 42 042.283 2 Pan, spring 43 167.072 4 Stud, pan/wishbone 44 163.080 12 Washer, plain 45 161.025 12 Nut, nyloc 46 162.124 8 Bolt, spring pan to wishbone 162.124 6 Bolt, spring pan to wishbone When rollbar is fitted 162.218 2 Bolt, spring pan to wishbone When rollbar is fitted 47 164.006 8 Washer, spring 48 161.026 8 Nut, shock absorber bracket to spring pan 49 330.040 1 400 g Penrite graphite grease 50 186.034 1 High temperature grease 51 041.997 1 Suspension bolting kit, 194 pcs

67© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Rear suspension

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 030.064 1 RH trailing arm 030.065 1 LH trailing arm 2 041.331 4 Bush, trailing arm, standard 041.492 4 Bush, trailing arm, polyurethane 3 122.191 4 Plug, blanking, 7/8" 4 122.190 4 Plug, blanking, 1 1/8" 5 032.311 2 Inner bracket, 1 notch P.I. to CP52867 & Carb. to CC61570 032.312 2 Inner bracket, 3 notch P.I. CP52868 on & Carb. CC61571 on 6 032.310 2 Outer bracket, 2 notch P.I. to CP52867 & Carb. to CC61570 032.311 2 Outer bracket, 1 notch P.I. CP52868 on & Carb. CC61571 on 7 162.114 4 Bolt, trailing arm 8 163.129 4 Washer, plain 9 161.338 4 Nut, nyloc 10 162.676 4 Bolt, bracket/chassis, for up to 3 shims fitted 162.038 4 Bolt, bracket/chassis, for over 3-8 shims fitted 11 032.456 A/R Shim plate 12 163.088 8 Washer, plain 13 161.025 8 Nut, nyloc 14 042.977 2 Rear coil spring P.I. to CP52867 & Carb. to CC61570 042.355 2 Rear coil spring P.I. CP52868 on & Carb. CC61571 on 042.505 2 Uprated rear coil spring, standard height 15 041.330 4 Collar, rubber

ILL N° PART N° QTY DESCRIPTION APPLICATION

16 032.236 2 Rebound rubber, trailing arm 17 032.236 2 Rebound rubber, chassis P.I. to CP52867 & Carb. to CC61570 041.340 2 Rebound rubber, chassis P.I. CP52868 on & Carb. CC61571 on 18 167.106 12 Stud 19 163.001 12 Washer, spring 20 161.012 12 Nut, nyloc 21 042.322 1 RH shock absorber 042.323 1 LH shock absorber 22 162.205 4 Screw 23 163.279 4 Washer 24 042.324 2 Link assembly 25 164.021 2 Washer, spring 26 161.032 2 Nut, nyloc 27 041.231 4 Rubber bush 041.779 4 Polyurethan bush 28 041.383 2 Washer, plain, upper 29 041.384 2 Washer, plain, lower 30 161.026 2 Nut 31 161.009 2 Nut, half 32 042.432 1 Bracket set for telescopic dampers. Bolts through the body back down to the chassis 33 042.433 2 SPAX adjustable shock absorbers 042.434 2 Koni rear adjustable shock absorbers 34 330.001 1 1/2 L. shock absorber oil, standard 330.002 1 1/2 L. shock absorber oil, competition

Notch

Notch

68© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Tools

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 150.884 1 Tool roll 2 159.352 1 Jack & tool pouch 3 132.725 1 Jack assembly 4 132.726 1 Jack handle 5 042.097 1 Hammer, copper/hide 6 133.141 1 Spanner for octagonal spinners 7 200.689 1 Wheel nut spanner P.I. to CP50000; Carb. to CC50000. 8 200.816 1 Wheel nut spanner P.I. CP50001 to CR5000; Carb. CC50000 to CF12500. 9 200.802 1 Wheel nut spanner P.I. CR5001 on Carb. CF12501 on 10 200.817 1 Combination tool TR5; TR250 11 200.818 1 Combination tool TR6 12 200.630 1 Tyre valve tool 13 165.697 1 Screw, hub grease cap 14 200.819 1 Headlamp rim removal tool 15 200.820 1 Spark plug spanner 16 200.452 1 Spark plug spanner 17 200.821 1 Spanner, 3/8" x 7/16" A/F 200.822 1 Spanner, 1/2" x 9/16" A/F 200.823 1 Spanner, 3/4" x 5/8" A/F

ILL N° PART N° QTY DESCRIPTION APPLICATION

18 200.824 1 Tube spanner, 1/2" x 9/16" A/F 19 200.711 1 Feeler gauge, imperial 20 200.652 1 Gauge & screwdriver, points 21 159.353 1 Tool bag, black “Hardura” 22 159.354 1 Tool pouch, black polythene 23 159.355 1 Tool pouch, black plastic, TR shield 159.356 1 Tool pouch, red plastic, TR shield 159.357 1 Tool pouch, blue plastic, TR shield 24 042.633 1 Hammer, lead 25 200.825 1 Hammer, copper 26 085.378 1 Decal, “Thor” 27 185.050 1 Cleaning brush 28 200.674 1 Spoke spanner 29 136.056 1 Wheel wrench, octagonal spinner 30 136.055 1 Wheel wrench, two ear spinner 31 159.059 1 Wheel wrench cover 32 132.526 1 Tyre pump 33 150.457 1 Strap to pull spare tyre 34 200.625 1 Tyre iron set 35 200.686 1 Combination tool 36 200.689 1 Wheel nut spanner 37 200.606 1 Grease gun 38 159.358 1 Tool strap kit TR6

69© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Master brake pump and pedals

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 053.058 1 Master brake pump assembly 2 052.416 1 Reservoir assembly 3 052.414 1 Filler cap 4 052.415 1 Seal 5 052.155 1 Repair kit 6 052.335 1 Tipping valve 7 162.139 4 Screw 8 164.015 4 Washer, spring 9 053.059 1 Servo assembly 10 052.156 1 Repair kit Type A seal 11 052.791 1 Repair kit Type B seal 12 052.606 1 Air filter 13 052.607 1 Diaphragm, servo 14 052.418 1 Non return valve, bayonet fit 15 052.419 1 Non return valve, pushing fitting 16 052.423 1 ‘O’ ring, for push fitting 17 161.002 2 Nut, imperial 161.600 2 Nut, metric 18 164.002 2 Washer, spring, imperial nut 164.040 2 Washer, spring, metric nut 19 161.002 4 Nut, imperial 161.600 Nut, metric 20 164.002 4 Washer, spring, imperial nut 164.039 Washer, spring, metric nut 21 163.131 4 Washer, plain 22 052.422 1 Spacer, aluminium 23 172.162 1 Clevis pin 24 163.001 1 Washer, plain

ILL N° PAR T N° QTY DESCRIPTION APPLICATION

25 172.322 1 Split pin 26 083.297 1 Brake light switch 27 164.050 1 Washer, shakeproof 28 161.279 1 Nut, half 29 054.105 1 One metre vacuum hose 30 172.523 2 Clip 31 052.201 1 Non -return valve 32 168.023 1 Washer, fibre 33 172.944 1 Clip, LHD 34 054.601 1 Pedal box 35 054.600 1 LHD brake pedal 054.518 1 RHD brake pedal 36 027.085 1 Pedal pad 37 054.192 2 Bush 38 027.183 1 Pivot shaft 39 012.330 2 Washer, double coil 40 172.311 2 Circlip 41 171.035 1 Return spring 42 162.029 9 Screw 43 164.012 9 Washer, spring 44 163.011 9 Washer, plain 45 162.045 2 Screw, RHD 46 164.002 2 Washer, spring 47 163.001 2 Washer, plain 48 053.039 1 1 L. brake fluid, Dot 4 053.018 1 1 L. brake fluid, silicone 49 052.117 1 Rubber grease for use on rubber components in or near brake fluid

A

B

70© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

20

Early Late

P - Type PB - Type

More info, see page 140

Front brakes

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 050.062 1 RH brake caliper, imperial thread, P P.I. to CP26075 & 050.063 1 LH brake caliper, imperial thread, P Carb. to CC29929 050.064 1 RH brake caliper, imperial thread, PB P.I. CP26076 to CP76094 & 050.065 1 LH brake caliper, imperial thread, PB Carb. CC29930 to CC81078 050.104 1 RH brake caliper, metric thread, 1973 on P.I. CP76095 on & 050.105 1 LH brake caliper, metric thread, 1973 on Carb. CC81079 on 2 052.078 2 Bleed screw, imperial thread 052.420 2 Bleed screw, metric thread 3 052.245 2 Dust cap 4 053.061 4 Piston, stainless steel A= 1.3 mm P.I. to CP26075 & 1967-’69, P-type Carb. to CC29929 053.090 4 Piston, stainless steel A =3 mm P.I. CP26076 on, 1969-’76, PB-type Carb. CC29930 on 5 052.157 1 Repair kit, A =1.3 mm P.I. to CP26075 & 1967-’69, P-type Carb. to CC29929 6 052.259 1 Repair kit, A =3 mm P.I. CP26076 on, 1969-’76, PB-type Carb. CC29930 on 7 053.066 1 Pad set, 4 pieces with 1/4" P.I. to CP76094 & (6.3mm) pin holes, 1967-’72 Carb. to CC81078 053.068 1 Pad set, 4 pieces with 3/16" P.I. CP76095 on, (4.7mm) pin holes, 1972-’76 Carb. CC81079 on 8 052.260 1 Set pins & clips, 1/4" (6.3mm) P.I. to CP76094 & 1967-’72 Carb. to CC81078 052.421 1 Set pins & clips, 3/16" (4.7mm) P.I. CP76095 on & 1972-’76 Carb. CC81079 on

ILL N° PART N° QTY DESCRIPTION APPLICATION

9 052.261 1 Shim set, anti-squeal, 6.3mm P.I. to CP76094 & Carb. to CC81078 052.608 1 Shim set, anti-squeal, 4.7mm P.I. CP76095 on, Carb. CC81079 on 11 162.658 4 Bolt, caliper to mounting bracket P.I. to CP76094 & Carb. to CC81078 162.650 4 Bolt, caliper to mounting bracket P.I. CP76095 on, Carb. CC81079 on 12 164.021 4 Washer, spring P.I. to CP76094 & Carb. to CC81078 164.011 4 Washer, spring P.I. CP76095 on, Carb. CC81079 on 13 050.057 2 Brake disc 14 164.006 8 Washer, spring 15 162.105 8 Bolt, brake disc to hub 16 050.116 1 RH dust shield 050.117 1 LH dust shield 17 052.386 2 Brake hose bracket 18 052.385 A/R Shim, brake disc 19 052.117 1 Rubber grease for use on rubber components in or near brake fluid 20 050.208 1 Brake conversion set 21 052.574 2 Rubber seal

71© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Rear brakes and handbrake

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 050.058 2 Brake drum 2 162.551 4 Screw, drum to hub 3 167.106 12 Stud 4 163.001 12 Washer, plain 5 161.012 12 Nut, nyloc 6 053.065 1 Brake shoe set, 4 pieces 7 052.388 1 Spring kit, 4 pieces 8 052.279 2 Spring, adjuster end 9 052.280 2 Spring, cylinder end 10 052.273 1 Kit, brake shoe fitting 11 052.610 4 Pin, brake shoe fitting 12 052.611 4 Spring, brake shoe fitting 13 053.028 2 Adjuster assembly 14 052.430 4 Tappet 15 161.019 4 Nut 16 164.007 4 Washer, shakeproof 17 053.062 2 Wheel cylinder assembly, .7 bore 17.7mm bore 18 052.316 1 Repair kit, for two cylinders, .7 bore 17.7mm bore 052.314 1 Repair kit, for two cylinders, .75 bore 19mm bore 19 052.078 2 Bleed screw 20 052.245 2 Dust cap 21 052.292 1 Fitting kit, for two cylinders 22 052.284 2 Spring, cylinder retaining 23 052.283 2 Boot retainer 24 052.285 2 Plate, locking cylinder 25 052.291 2 Boot, dust 26 052.387 2 Lever, handbrake 27 052.117 1 Rubber grease, for use on rubber components in or near brake fluid 28 053.176 1 Vizibleed bleeder 29 054.602 1 Handbrake assembly P.I. models & Carb. to CF50000 054.709 1 Handbrake assembly Carb. CF50001 on 30 054.273 1 Lever, handbrake P.I. models & Carb. to CF50000 054.603 1 Lever, handbrake Carb. CF50001 on 31 054.239 1 Handgrip P.I. models & Carb. to CF50000 32 054.274 1 Handgrip Carb. CF50001 on

ILL N° PART N° QTY DESCRIPTION APPLICATION

33 054.604 1 Rod assembly 34 171.033 1 Spring 35 054.254 2 Bush, nylon, fulcrum pin 36 054.255 1 Fulcrum pin 37 161.337 1 Nut, nyloc 38 054.257 1 Pin 39 054.258 1 Ratchet plate P.I. models & Carb. to CF50000 054.710 1 Ratchet plate Carb. CF50001 on 40 054.270 1 Pawl 41 086.069 1 Warning switch, handbrake Carb. CF50001 on 42 162.052 1 Screw 43 054.259 1 Link, compensator P.I. models & Carb. to CF50000 054.711 1 Link, compensator Carb. CF50001 on 44 172.161 1 Clevis pin 45 163.010 1 Washer, plain 46 172.317 1 Split pin 47 054.260 1 Compensator 48 172.955 1 Clevis pin 49 163.081 1 Washer, plain 50 172.315 1 Split pin 51 054.160 2 Handbrake cable 52 122.193 2 Grommet 53 161.019 2 Nut 54 164.012 2 Washer, spring 55 054.261 2 Fork end 56 161.384 2 Nut, square 57 161.362 2 Nut, half 58 172.366 2 Clevis pin 59 163.001 2 Washer, plain 60 172.322 2 Split pin 61 052.387 2 Lever, handbrake 62 054.712 1 RH extension, handbrake lever Carb. CF50001 on 054.713 1 LH extension, handbrake lever

72© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

LHD

LHD

Brake + clutch hoses and lines • LHD

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 054.150 1 LHD brake pipe set, imperial P.I. to CP76094 & threaded calipers Carb. to CC81078 054.151 1 LHD brake pipe set, metric P.I. CP76095 on & threaded calipers Carb. CC81079 on 2 054.262 1 Pipe, LH front hose to P.I. to CP76094 & caliper, imperial threaded Carb. to CC81078 054.272 1 Pipe, LH front hose to P.I. CP76095 on & caliper, metric threaded Carb. CC81079 on 3 054.262 1 Pipe, RH front hose to P.I. to CP76094 & caliper, imperial threaded Carb. to CC81078 054.272 1 Pipe, RH front hose to P.I. CP76095 on & caliper, metric threaded Carb. CC81079 on 4 054.120 2 Front brake hose 5 161.009 4 Nut, half 6 164.032 4 Washer, shakeproof 7 054.123 1 LH rear brake hose 8 161.009 1 Nut, half 9 164.032 1 Washer, shakeproof 10 168.014 1 Washer, copper 11 054.122 1 RH rear brake hose 12 161.009 2 Nut, half 13 164.032 2 Washer, shakeproof 14 052.240 1 Connector, 3 way, front 15 162.208 1 Bolt 16 163.081 1 Washer, plain 17 161.336 1 Nut, nyloc 18 053.114 1 Pressure differential assembly, brass 053.118 1 Pressure differential assembly, cast iron 19 052.306 1 Switch, brass valve 086.125 1 Switch, cast iron valve 20 052.131 1 Repair kit 21 165.700 1 Bolt

ILL N° PART N° QTY DESCRIPTION APPLICATION

22 164.012 1 Washer, spring 23 161.336 1 Nut, nyloc 24 172.297 1 Clip, spring, RH pipe to cross member 25 172.264 1 Clip, pipe to turret support 26 172.297 1 Clip, spring, pipe to chassis 27 172.388 1 Double union 28 052.240 1 Connector, 3 way rear 29 162.208 1 Bolt 30 163.081 1 Washer, plain 31 161.336 1 Nut, nyloc 32 172.430 1 Clip, pipe to crossmember 33 172.312 2 Clip, pipe to trailing arm 34 172.839 A/R Clip, brake & fuel pipe 35 172.522 A/R Rivet 36 054.598 1 One metre vacuum hose 37 172.523 2 Clip, servo hose 38 052.201 1 Non-return valve 39 168.023 1 Washer, fibre 40 172.944 1 Clip, servo hose to rocker cover 41 054.190 1 Pipe, cylinder to flexible hose 42 052.318 1 Connector, pipe to hose 43 027.084 1 Clutch hose, slave cylinder 44 172.395 1 Clip, clutch pipe 45 162.061 1 Screw 46 054.482 1 Front brake hose set, stainless steel braided 47 054.483 1 Rear brake hose set, stainless steel braided 48 027.381 1 Clutch hose, flexible stainless steel braided 49 054.401 1 5 meter brake pipe 50 052.406 A/R Nipple, male 51 052.405 A/R Nipple, female 52 052.243 A/R Connector, in line

73© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

RHD

RHD

Brake + clutch hoses and lines • RHD

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 054.714 1 RHD brake pipe set, P.I. to CP76094 imperial threaded calipers 054.715 1 RHD brake pipe set, P.I. CP76095 on metric threaded calipers 2 054.262 1 Pipe, LH front hose to caliper P.I. to CP76094 imperial threaded 054.272 1 Pipe, LH front hose to caliper P.I. CP76095 on metric threaded 3 054.262 1 Pipe, RH front hose to caliper P.I. to CP76094 imperial threaded 054.272 1 Pipe, RH front hose to caliper P.I. CP76095 on metric threaded 4 054.120 2 Front brake hose 5 161.009 4 Nut, half 6 164.032 4 Washer, shakeproof 7 054.123 1 LH rear brake hose 8 161.009 1 Nut, half 9 164.032 1 Washer, shakeproof 10 168.014 1 Washer, copper 11 054.122 1 RH rear brake hose 12 161.009 2 Nut, half 13 164.032 2 Washer, shakeproof 14 135.257 4 Clip, pipes to bulkhead TR5 135.257 2 Clip, pipes to bulkhead TR6 15 172.079 1 Clip, double, master cylinder bracket TR6 16 172.956 1 Clip, pipe, master cylinder to 3 way TR6 17 172.263 4 Clip, clutch and brake pipes to bulkhead 18 162.061 10/8 Screw 19 052.240 1 Connector, 3 way, front

ILL N° PART N° QTY DESCRIPTION APPLICATION

20 162.208 1 Bolt 21 163.081 1 Washer, plain 22 161.336 1 Nut, nyloc 23 172.297 1 Clip, spring, RH pipe to cross member 24 172.264 1 Clip, pipe to stay 25 172.388 2 Double union 26 052.240 1 Connector, 3 way, rear 27 162.208 1 Bolt 28 163.081 1 Washer, plain 29 161.336 1 Nut, nyloc 30 172.430 1 Clip, pipe to crossmember 31 172.312 2 Clip, pipe to trailing arm 32 172.297 1 Clip, spring, pipe to chassis 33 172.839 A/R Clip, brake & fuel pipe 34 172.522 A/R Rivet 35 054.599 1 One metre vacuum hose 36 172.523 2 Clip, servo hose 37 052.201 1 Non-return valve 38 168.023 1 Washer, fibre 39 054.596 1 Pipe, cylinder to flexible hose 40 052.318 1 Connector, pipe to hose 41 027.084 1 Clutch hose,slave cylinder 42 054.482 1 Front brake hose set, stainless steel braided 43 054.483 1 Rear brake hose set, stainless steel braided 44 027.381 1 Clutch hose, flexible stainless steel braided 45 054.401 1 5 metre brake pipe 46 052.406 A/R Nipple, male 47 052.405 A/R Nipple, female 48 052.243 A/R Connector, in line

74© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Battery and wiring loom

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 082.022 1 Battery, black rubber casing Without Lucas lable 2 082.120 1 Battery, modern replacement, ready to use Without Lucas lable 3 085.260 1 ‘Lucas’ battery sticker Red on gold, very nice 4 132.525 1 Battery tray 5 082.009 5 1 Litre acid (sold only at counter, will not be shipped) 7 083.174 1 Battery switch with removable key Use with ill no. 23 until 28 8 080.142 1 Cable battery - to earth 9 162.045 1 Screw, earth 10 164.002 1 Washer, spring 11 080.138 1 Cable battery + to solenoid P.I. to CR1 &TR6 Carb. to CF1 12 080.141 1 Cable battery + to solenoid P.I. CR1 on & Carb. CF1 on 13 080.365 1 Cable battery + to solenoid TR250 14 162.979 2 Bolt 15 161.728 2 Nut 16 080.340 1 Cable switch to starter TR250 17 172.545 1 ‘P’ clip, insulated, + cable 18 162.077 1 Screw 19 172.496 1 Strap 20 122.013 1 Boot, cable 21 083.178 A/R Terminal, - 083.179 A/R Terminal, + 22 086.773 A/R Ring terminal 23 080.299 1 1 meter starter cable Plain copper wires 080.133 1 5 meter starter cable 24 080.134 1 1 meter earth cable Wire bundles, tinned copper 25 083.651 A/R Soldered flag terminal 26 083.652 A/R Straight terminal 27 083.653 A/R Heat shrink tubing 9.5 mm I.D. x 32 mm 28 133.518 1 Battery clamping bars, 13" between holes 133.516 1 Battery clamping bars, 12 3/4" between holes 133.517 1 Battery clamping bars, 12" between holes 29 162.451 2 ‘J’ bolt, 8 1/4" 52.38 mm long 162.771 2 ‘J’ bolt, 7" 44.45 mm long 162.450 2 ‘J’ bolt, 5 3/4" 36.51 mm long 30 161.061 2 Nut, nyloc 31 163.011 2 Washer, plain 32 161.436 2 Nut, wing

ILL N° PART N° QTY DESCRIPTION APPLICATION 33 164.012 2 Washer, spring 34 121.652 1 Grommet kit, firewall & forward TR5; TR250 121.656 1 Grommet kit, firewall & forward TR6 35 083.115 A/R Bulb holder, claw type, self earth 084.132 A/R Bulb holder, claw type, separate earth Glove box & key lamp 36 084.133 A/R Bulb holder, sleeve type 37 084.123 A/R Bulb 38 084.135 A/R Bulb holder, sleeve type Footwell lamp 39 084.126 A/R Bulb, bayonet type, 40 086.002 A/R In line fuse holder ass’y 41 086.289 A/R In line fuse holder 42 084.005 A/R Fuse set 35 amp, 5 pieces Standard fuse for TR6 083.165 A/R Fuse set 15 amp, 5 pieces In line headlamp main beam 083.163 A/R Fuse set 25 amp, 5 pieces In line cigar lighter 43 083.180 A/R Cable terminal, solder type 44 083.044 A/R Cable terminal, sleeve type 45 086.770 A/R Cable connector, single 46 083.042 A/R Cable connector, double 47 083.043 A/R Cable connector, triple 48 083.993 A/R Female terminal 3/16", 4.7mm 49 083.968 A/R Female terminal 1/4" 6.3 mm 50 083.185 A/R Female terminal 3/8" 9.5 mm 51 086.288 A/R Insulator for 083.993 52 083.182 A/R Insulator for 083.968 53 083.186 A/R Insulator for 083.185 54 083.996 A/R Eyelet terminal 3/16", 4.7 mm 55 083.997 A/R Eyelet terminal 1/4", 6.3 mm 56 083.998 A/R Eyelet terminal 3/8", 7.9 mm 57 172.144 A/R ‘P’ clip, fuse holder 58 172.433 A/R Clip, fuse holder to edge 59 172.250 A/R Clip, earth lead & lamp leads 60 172.623 A/R Clip, aluminium 61 172.945 A/R Cable tie, fir tree 62 172.157 A/R Cable tie Cut to length 63 133.888 A/R Tag for wiring loom 64 172.559 A/R Sleeve for 133.888 65 086.779 A/R Earth tag, welded to body 66 086.780 1 Earth tag, wiper mount

75© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Wiring looms

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 080.308 1 RHD Full wiring loom TR5 2 080.108 1 LHD Main wiring loom, front TR5 080.115 1 LHD Main wiring loom, front P.I. to CP50000 080.111 1 LHD Main wiring loom, front P.I. from CP50001 to body no. 52327CP 080.368 1 LHD Main wiring loom, front P.I. from body no 52328CP with inertia switch to CR1 080.368 1 LHD Main wiring loom, front P.I. from CR1 to CR5000 080.112 1 LHD Main wiring loom, front P.I. from CR5001 080.370 1 LHD Main wiring loom, front TR250 080.115 1 LHD Main wiring loom, front Carb. to CC50000 080.116 1 LHD Main wiring loom, front Carb. CC50001 to CC75000 080.117 1 LHD Main wiring loom, front Carb. CC75001 to CC85738 080.118 1 LHD Main wiring loom, front Carb. CF1 to CF990 080.371 1 LHD Main wiring loom, front Carb. CF991 to CF12500 080.372 1 LHD Main wiring loom, front Carb. CF12501 to CF27000 080.119 1 LHD Main wiring loom, front Carb. CF27001 to CF35000 080.120 1 LHD Main wiring loom, front Carb. CF35001 to CF50000 080.121 1 LHD Main wiring loom, front Carb. from CF50001 080.373 1 RHD Main wiring loom, front TR5 080.353 1 RHD Main wiring loom, front P.I. CP50000 080.354 1 RHD Main wiring loom, front P.I. from CP50001 to body no. 51398CP 080.360 1 RHD Main wiring loom, P.I. from body no. 51399CP with inertia switch, front to CR1

ILL N° PART N° QTY DESCRIPTION APPLICATION

080.361 1 RHD Main wiring loom, front P.I. from CR1 to CR5000 080.362 1 RHD Main wiring loom, front P.I. from CR5001 3 080.113 1 Body wiring loom, rear P.I. to CR1 080.114 1 Body wiring loom, rear P.I. from CR1 080.374 1 LHD Body wiring loom, rear TR250 080.122 1 LHD Body wiring loom, rear Carb. to CC75000 080.123 1 LHD Body wiring loom, rear Carb. CC75001 to CC85738 080.124 1 LHD Body wiring loom, rear Carb. CF1 to CF12500 080.125 1 LHD Body wiring loom, rear Carb. CF12501 to CF50000 080.126 1 LHD Body wiring loom, rear Carb. from CF50001 4 080.356 1 Gearbox wiring loom, reverse lamps P.I. to CP75000 Carb. To CC75000 080.375 1 Gearbox wiring loom, reverse lamps P.I. from CP75001 080.376 1 Gearbox wiring loom, reverse lamps Carb. CC75001 to and seat belt interlock CF50000 080.377 1 Gearbox wiring loom, reverse lamps Carb. from CF50001 and seat belt interlock 5 172.508 1 ‘P’ clip, to gearbox cover 6 080.378 1 Extension wire, ignition switch P.I. to CP50000 & when steering lock is fitted Carb. to CC50000 7 080.379 1 Extension wire, brake PDWA P.I. LHD to CP50000 & Carb. LHD to CC50000. 8 086.778 1 Connector block, loom P.I. to CR1 & 9 172.572 2 Rivet Carb. to CF1

Rear wiring

Front wiring

Full set:front+rearwiring

76© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

TR250

TR250M35GTYPE

TR250M35JTYPE

TR62M100TYPE

TR5&TR6

TR5&TR6M418GTYPE

Starter motor

ILL N° PART N° QTY DESCRIPTION APPLICATION

TR250 1 082.002 1 Starter motor, LUCAS without TR250, replacement type inspection band, replacement type 082.018 1 Starter motor, LUCAS with No. M35G 25022 & 25079 inspection band & a circlip 082.107 1 Starter motor, LUCAS with No. M35J 25149 inspection band & a circlip 2 081.035 1 Brush set 25022 & 25079 3 081.222 1 Brush set 25149 4 081.116 1 Spring set Check type of inner loop 5 081.223 1 Spring set Before ordering 6 081.029 1 Bush, drive end 25022 081.909 1 Bush, drive end 25079 8 081.226 1 Bush set, front and rear 25149 9 081.179 1 Bush, rear end, for pressed end plate 25022 & 25079 10 081.120 1 Bush, rear end, for die cast end plate 25022 & 25079 18 081.225 1 Pinion & sleeve, 9 teeth 25022 21 081.225 1 Pinion & sleeve, 9 teeth 25149 22 081.033 1 Spring 25022 & 25079 081.494 1 Spring 25149 23 081.489 1 Circlip 25 162.478 2 Bolt 26 164.006 2 Washer, spring 27 164.025 1 Washer, shakeproof 28 161.026 2 Nut 29 081.334 A/R Shim 30 011.562 1 Spacer

ILL N° PART N° QTY DESCRIPTION APPLICATION

TR5&6 31 082.028 1 Starter motor, LUCAS TR5 & TR6 32 081.868 1 Bush, drive end M418G 25626A/B 33 081.295 1 Pinion assembly M418G 25626A/B 34 081.869 1 Bush, pinion M418G 25626A/B 50 081.075 1 Brush set M418G 25626A/B 51 081.179 1 Bush, rear end M418G 25626A/B 52 081.074 1 Spring set M418G 25626A/B 53 081.157 1 Solenoid assembly M418G 25626A/B 55 081.891 1 Bush set, front and rear 2M100 25647 A/E/F/J & 25714A 58 081.895 1 Pinion assembly 25647 081.896 1 Pinion assembly 25714 62 081.901 1 Brush set 65 082.025 1 Solenoid assembly 25647 081.903 1 Solenoid assembly 25714 67 162.024 2 Bolt 68 164.025 2 Washer, shakeproof 69 164.006 2 Washer, spring 70 161.026 2 Nut

TR250 TR5&6

More info page 133

77© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

AC DELCO 26 082.070 1 Alternator, DELCO 27 081.842 1 Front bearing 28 081.847 1 Bush 29 081.848 1 Rear bearing 32 081.857 2 Brush set 35 081.862 1 Nut, shaft 36 081.863 1 Washer, plain 37 081.864 1 Pulley, 3/8" groove 081.865 1 Pulley, 1/2" groove Carb models only 38 081.866 1 Fan

ILL N° PART N° QTY DESCRIPTION APPLICATION LUCAS 15AC 1 082.030 1 Alternator, LUCAS 15AC type, 28 amp. TR5 & TR250 2 081.797 1 Front bearing 3 081.800 1 Rear bearing 4 081.802 1 Rectifier 6 081.185 1 Brush set 7 081.813 1 Regulator 8 162.139 2 Screw 9 164.015 2 Washer, spring 10 163.013 2 Washer, plain

LUCAS 17-18AC 11 082.010 1 Alternator, LUCAS 17ACR type, 36 amp. Replaces all earlier types 082.142 1 Alternator, LUCAS 18ACR type, 45 amp 12 081.816 1 Drive end bearing kit 13 081.819 1 Slip ring end bearing kit 15 081.822 1 Brush box 16 081.186 1 Brush set

21 161.727 1 Nut, shaft 22 164.111 1 Washer, plain 23 081.811 1 Pulley, 3/8" groove, 2.1/2" dia. 081.834 1 Pulley, 1/2" groove, 2.7/8" dia. Carb models only 24 081.835 1 Fan 25 081.180 1 Connector, to convert early alternators

15AC

17AC-18ACR

AC DELCO

Alternators

78© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Fuse box, flashers, relays and switches

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 083.091 1 Voltage stabiliser 2 162.980 1 Screw 3 083.119 1 Starter solenoid, push button type TR250 4 086.286 1 Rubber cap 5 162.822 2 Screw 6 163.013 4 Washer, plain 7 164.015 2 Washer, spring 8 161.024 2 Nut 9 083.956 1 Starter solenoid TR250 10 161.002 2 Nut 11 164.002 2 Washer, spring 12 083.813 1 Fuse box assembly 13 083.168 1 Cover 14 165.708 2 Screw 15 164.015 2 Washer, spring 16 163.013 2 Washer, plain 17 084.005 1 Fuses 35A, set of 5 18 086.774 1 Flasher box, indicator, 2 terminals 19 083.357 1 Clip, rectangular 20 162.588 1 Screw 21 163.013 1 Washer, plain 22 172.476 1 Nut, spire 23 083.172 1 Flasher box, indicator 24 083.357 1 Clip, round Germany 25 162.728 1 Screw 26 163.292 1 Spacer 27 083.486 1 LHD Flasher box, hazard, 3 terminals TR6 PI CP50000 to CR1 & Carb. CC50001 to CF1 28 083.173 1 LHD Flasher box, hazard, 2 terminals PI CR1 on & Carb. CF1 on 29 083.357 1 Clip, rectangular 30 162.588 1 Screw 31 163.013 1 Washer, plain 32 172.476 1 Nut, spire 33 083.080 1 Switch, dip PI to CR1 & 34 086.287 1 Rubber cap Carb. to CF1 35 137.484 1 LHD Bracket, dip switch 36 162.145 2 Screw

ILL N° PART N° QTY DESCRIPTION APPLICATION

37 172.021 2 Nut, spire 38 162.029 2 Screw 39 164.012 2 Washer, spring 40 165.709 2 RHD Screw 41 164.015 2 Washer, spring 42 086.141 1 Switch, boot lamp TR6 43 083.044 1 Cable terminal 44 162.588 2 Screw 45 086.141 2 Switch, int. light, cable connector type TR6 PI to CP50000 & 46 083.044 4 Cable terminal Carb. to CC50000. 47 162.588 4 Screw 48 086.142 2 Switch, interior light, Lucar type PI CP50000 to CR5000 & 49 162.588 2 Screw Carb. CC50001 to CF12500 50 083.629 2 Switch, interior light, Lucar type PI CR5000 on & Carb. CF12501 on 51 162.588 2 Screw 52 086.143 1 Switch, interior light & Carb. CC50001 to CF12500 warning buzzer, LH 53 162.588 1 Screw Carb. CF12501 on 54 083.870 2 Switch, int. light, black plunger, LH Carb. CF12501 on 086.144 2 Switch, interior light, red plunger, LH 55 162.588 1 Screw 56 086.146 A/R Switch, seat sensor 57 083.810 1 Relay, starter Carb. CF12501 on 58 086.150 1 Buzzer, ignition & seat belts Carb. CC50001 to CC75000 086.130 1 Buzzer, ignition & seat belts Carb. CC75001 to CF12500 59 086.151 1 Control sequential seat belt system Carb. CF12501 to CF36177 086.131 1 Control, sequential seat belt system Carb. CF36178 to CF50000 60 086.152 1 Control, sequential seat belt system Carb. CF1 on 61 086.145 1 Switch, glove box light 62 083.571 1 LHD Relay, hazard warning PI to CR1 & 63 162.139 2 Screw Carb. to CF1 64 163.013 2 Washer, plain 65 164.015 2 Washer, spring 66 161.024 2 Nut 67 083.120 1 Relay, ignition 68 162.054 2 Screw 69 163.013 2 Washer, plain

79© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

H4

Headlamps, fog and spot lamps

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 084.446 2 LHD headlamp ass’y ‘E’ approved 084.447 2 LHD headlamp ass’y ‘E’ approved with pilot lamp 086.781 2 RHD headlamp ass’y ‘E’ approved 2 084.385 2 Seal, headlamp bowl to body 3 133.050 2 Headlamp bucket 4 084.051 2 Kit, lamp adjusting 5 084.053 2 Inner retaining rim 6 084.087 2 Outer retaining rim, chrome 7 084.153 2 Headlamp rim, chrome 8 172.159 2 Retaining clip 9 172.043 2 Retaining clip, alternative 10 166.065 6 Screw 11 162.729 6 Screw 12 163.012 6 Washer 13 161.317 6 Nut, spire 14 084.082 2 LHD lamp unit, ‘E’ approved 084.105 2 LHD lamp unit, ‘E’ approved with pilot lamp hole 084.102 2 RHD lamp unit, ‘E’ approved 15 084.054 2 Headlamp bulb, ‘E’ approved, clear 17 084.103 1 LHD lamp unit H4 ‘E’ approved 084.107 1 LHD lamp unit H4 ‘E’ approved with pilot lamp hole 18 084.110 2 H4 bulb, clear 084.829 2 H4 bulb, clear, 100/80W Not legal 19 084.052 2 Wiring & lamp socket

ILL N° PART N° QTY DESCRIPTION APPLICATION 20 084.500 2 Wiring & lamp socket with pilot lamp socket 23 083.115 2 Bulb holder, to convert loom to pilot light 24 084.123 2 Pilot bulb, capless 25 084.455 2 Bulb holder, to convert loom to pilot light For 5/8” hole 26 084.113 2 Pilot bulb, bayonet 27 084.193 A/R Spot lamp assembly, stem mounting 084.191 A/R Fog lamp assembly, stem mounting 28 084.603 A/R Spot lamp assembly, back mounting 084.604 A/R Fog lamp assembly, back mounting 29 084.196 A/R Light unit for spot lamp 084.194 A/R Light unit for fog lamp 30 084.119 A/R Bulb for spot lamp 084.198 A/R Bulb for fog lamp 31 185.337 2 Fog or spot lamp protector, 5” 32 135.755 1 Two hole mounting plate for switches & warning lights. Made from stainless steel. 33 135.756 1 Three hole mounting plate for switches & warning lights. Made from stainless steel. 34 083.088 A/R On-off switch, use relay from 50 watts onwards 35 083.084 A/R Light switch, three positions; off side light & head light 36 083.159 A/R Warning light green 083.477 A/R Warning light red 086.187 A/R Warning light amber 086.370 A/R Warning light blue 37 084.126 A/R Spare bulb, warning lights 38 083.120 A/R Relay, metal boxed

Back mounting

Stem mounting

80© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Front lamps • TR5/TR250

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 084.024 2 Flasher lamp, amber glass lens TR5 084.513 2 Flasher lamp, clear glass lens, Italy 084.174 2 Flasher & side lamp, white glass lens, Switzerland 2 084.089 2 Amber glass lens 084.091 2 White glass lens, Italy & Switzerland 3 084.080 2 Chrome retaining rim 4 084.062 2 Bulb, 21w, single element 084.063 2 Bulb, 21/5w, dual element, Switzerland 5 084.298 2 Interior, contacts, single 084.168 2 Interior, contacts, double, Switzerland 6 084.175 2 Bulb holder - single 084.168 2 Bulb holder, Switzerland - double 7 084.092 2 Body, rubber 8 083.044 A/R Connector 9 162.588 6 Screw 10 161.315 6 Nut, spire 11 084.294 2 Flasher lamp, amber plastic lens TR250 084.678 2 Side & flasher lamp, clear plastic lens Italy 12 084.295 2 Amber plastic lens 084.436 2 Clear plastic lens 13 084.680 2 Bulb holder, single contact 14 084.298 2 Interior, contacts, single 084.168 2 Interior contacts, double 15 084.062 2 Bulb, 21w, single element 084.063 2 Bulb, 21/5w 16 084.299 2 Grommet 17 162.496 4 Screw 18 163.062 2 Washer, fibre 19 084.296 2 Foam seal 20 084.297 2 Rubber gasket 21 083.044 2 Connector 22 162.728 6 Screw 23 161.315 6 Nut, spire

ILL N° PART N° QTY DESCRIPTION APPLICATION

24 084.275 1 LH front side marker lamp assembly, TR5 white & amber lens 084.274 1 RH front side marker lamp assembly, white & amber lens 084.276 1 LH side marker lamp assembly, TR250 all amber lenses 084.277 1 RH side marker lamp assembly, all amber lenses 25 084.285 2 Amber lens 26 162.495 2 Screw 27 084.286 2 Seal, rubber 28 084.128 2 Bulb, 5w 29 084.278 2 Parking lamp ass’y, white TR5 084.279 2 Parking lamp ass’y, amber TR250 30 084.280 2 Rim & lens ass’y, white TR5 084.281 2 Rim & lens ass’y, amber TR250 31 084.113 2 Bulb, 5w 32 084.282 2 Ring, plastic 33 084.283 2 Gasket, lens seating 34 084.579 2 Interior, contacts 35 084.284 2 Gasket, lamp seating 36 083.044 2 Sleeve 37 162.718 4 Screw 38 084.287 1 Housing, side, LH 084.288 1 Housing, side, RH 39 084.289 1 Gasket, lamp ass’y to wing, LH 084.290 1 Gasket, lamp ass’y to wing, RH 40 163.011 4 Washer, plain 41 164.012 4 Washer, spring 42 161.019 4 Nut 43 122.180 2 Grommet 44 084.968 2 Bulb holder 45 084.602 1 Bulb kit 7 pieces spare bulb kit

TR5

TR250

Side lamp45

81© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 084.309 2 Stop, tail & flasher lamp, TR5 (Amber/red) amber flasher lens 084.310 2 Stop, tail & flasher lamp, TR250 (Red/red) red flasher lens 2 084.311 2 Lens, red with amber flasher TR5 (Amber/red) 084.312 2 Lens, red with red flasher TR250 (Red/red) 3 084.314 2 Gasket, lens seating 4 084.062 2 Bulb, 21w 5 084.298 2 Interior, contacts 6 084.063 2 Bulb, 21/5w 7 084.316 2 Interior, contacts 8 084.313 2 Bezel 9 162.498 4 Screw 10 162.777 2 Screw 11 163.062 6 Washer, rubber 12 084.315 4 Gasket, lamp to body 13 084.083 4 Grommet 15 161.024 8 Nut 16 164.016 8 Washer, shakeproof 17 084.513 2 Reverse lamp, white lens 18 084.091 2 White glass lens 19 084.175 2 Bulb holder 21 084.062 2 Bulb, 21w 22 084.080 2 Rim 23 084.092 2 Body, rubber

ILL N° PART N° QTY DESCRIPTION APPLICATION

24 083.044 2 Connector 25 135.734 1 Plinth, lamp to body, RH 137.485 1 Plinth, lamp to body, LH 26 165.380 6 Screw 27 161.315 6 Nut, spire 28 084.300 2 Rear side marker lamp assembly, red 29 084.301 2 Red plastic lens 30 084.128 2 Bulb, capless 31 084.304 2 Bulb holder 32 162.497 2 Screw 33 084.302 2 Gasket, lens seating 34 084.303 2 Gasket, lamp to body 35 162.588 4 Screw 36 161.316 4 Nut, spire 37 084.317 2 Number plate lamp assembly 38 084.233 2 Rim 39 084.146 2 Clear glass lens 40 084.074 2 Bulb, 5w 41 084.298 2 Interior, contacts 42 084.318 2 Body, rubber 43 172.449 2 Clip 44 122.193 2 Grommet 45 162.499 4 Screw 46 161.315 4 Nut, spire 47 084.602 1 Bulb kit 7 pieces spare bulb kit

Stop, tail & flasher lamp • TR5/TR250

TR5European

amber & red

TR250USA = All red lensflasher, tail & stop

Flasher

Tail & stop

Reverse lamp

Rear side lamp

Number plate lamp

82© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Front lamps • TR6

ILL N° PART N° QTY DESCRIPTION APPLICATION

European 1 084.319 1 Side & flasher lamp, LH, white PI except Italy & amber lens 084.320 1 Side & flasher lamp, RH, white & amber lens 086.784 1 Side & flasher lamp, LH, white lens Italy CF1 on 086.783 1 Side & flasher lamp, RH, white lens 2 084.325 1 White & amber lens, LH PI except Italy 084.326 1 White & amber lens, RH 086.786 1 White lens, LH Italy CF1 on 086.785 1 White lens, RH 1973 on 3 084.062 2 Bulb, indicator, 21 watt 4 084.069 2 Bulb, sidelamp, 5 watt 5 084.331 1 Body, rubber, LH PI except Italy 084.332 1 Body, rubber, RH 086.787 2 Body, rubber Italy CF1 on 8 162.500 4 Screw

USA & Italy 12 084.321 1 Side & flasher lamp, LH, amber Carb. to CF1 & chrome lens 1969-’72 084.322 1 Side & flasher lamp, RH, amber & chrome lens 084.323 1 Side & flasher lamp, LH, amber lens Carb. CF1 to CF27000 084.324 1 Side & flasher lamp, RH, amber lens 1972-’74 086.871 1 Side & flasher lamp, LH, white lens Italy to CF1, 1973 086.788 1 Side & flasher lamp, RH, white lens 13 084.327 1 Amber & chrome lens, LH Carb. to CF1 084.328 1 Amber & chrome lens, RH 084.329 1 Amber lens, LH Carb. CF1 to CF27000 084.330 1 Amber lens, RH 086.786 1 White lens, LH Italy to CF1 086.785 1 White lens, RH 14 162.500 4 Screw 15 084.063 2 Bulb, dual filament, 21/5 watt 16 084.069 2 Bulb, sidelamp, 5 watt 20 084.331 1 Body, rubber, LH Carb. to CF27000 084.332 1 Body, rubber, RH 084.331 1 Body, rubber, LH Italy to CF1 084.332 1 Body, rubber, RH

ILL N° PART N° QTY DESCRIPTION APPLICATION

Bumper lamp 23 084.334 2 Side & flasher lamp, Carb. CF27000 to white & amber lens CF50000 084.335 2 Side & flasher lamp, amber lens Carb. from CF50001 24 084.336 2 Chrome rim & screw 25 165.713 4 Screw 26 084.337 2 White & amber lens with gasket Carb. CF27000 to CF50000 084.338 2 Amber lens with gasket Carb. from CF50001 27 084.069 2 Bulb, sidelamp, 5 watt Carb. CF27000 to CF50000 084.113 2 Bulb, sidelamp, 4 watt Carb. from CF50001 28 084.062 2 Bulb, indicator, 21 watt 31 084.831 2 Gasket, lens 32 084.339 2 Gasket, lamp 33 084.269 2 Grommet, sidelamp 34 084.083 2 Grommet, indicator 35 122.180 2 Grommet, cables through valance 36 133.740 1 Plinth, mounting, LH 133.739 1 Plinth, mounting, RH

Europe & USA 1973 on 44 084.344 1 Repeater lamp, LH 084.345 1 Repeater lamp, RH 45 084.347 1 Amber & chrome lens, LH 084.346 1 Amber & chrome lens, RH 46 084.113 2 Bulb, repeater, 4 watt 49 162.497 4 Screw 50 084.348 2 Gasket, lamp & lens 54 122.193 2 Grommet, harness

USA up to 1973 55 084.341 1 Side marker lamp, LH, amber & chrome lens 084.340 1 Side marker lamp, RH, amber & chrome lens 56 084.342 1 Amber & chrome lens, LH 084.343 1 Amber & chrome lens, RH 57 084.069 2 Bulb, repeater, 5 watt 60 162.497 4 Screw 61 084.348 2 Gasket, lamp & lens 65 122.193 2 Grommet, harness 66 084.602 1 Bulb kit 7 pieces spare bulb kit 67 162.507 1 3/16” screw set (40 pieces)

European

USA (Italy)

Bumper lampUSA 1975 on

1973 on

USA up to 1973

83© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Rear lamps • TR6

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 084.350 1 Tail lamp assembly, RH European 084.349 1 Tail lamp assembly, LH European 084.351 1 Tail lamp assembly, RH, USA, carb. CF1 on 084.352 1 Tail lamp assembly, LH USA 2 084.356 1 Amber lens, flasher, RH 084.355 1 Amber lens, flasher, LH 3 084.358 1 Red lens, stop & tail RH 084.357 1 Red lens, stop & tail LH 4 084.360 1 Clear lens, reverse RH 084.359 1 Clear lens, reverse LH 5 084.364 1 Amber lens, side, RH European 084.363 1 Amber lens, side, LH European 084.365 1 Red lens, side, RH USA 084.366 1 Red lens, side, LH USA 6 084.367 2 Gasket, lens 7 084.368 2 Gasket, side lens 8 162.501 20 Screw 9 084.226 2 Bulb holder, indicator 10 084.062 2 Bulb, indicator, 21 watt 11 084.227 2 Bulb holder, stop/tail 12 084.063 2 Bulb, stop/tail, 21/5 watt 13 084.226 2 Bulb holder, reverse 14 084.062 2 Bulb, reverse, 21 watt 15 084.369 2 Bulb holder, side repeater 16 084.069 2 Bulb, side repeater, 5 watt 17 084.371 2 Gasket, lamp, large (back piece) 18 084.370 2 Gasket, lamp, small (side piece) 20 161.024 12 Nut 21 164.015 12 Washer, spring 22 163.292 12 Washer, plain 23 086.789 2 Reflector Carb. body 52453 to CF1 24 086.790 2 Plinth 25 162.505 2 Screw, short 26 162.505 2 Screw, long 27 084.372 1 Number plate lamp, bumper PI to CR1 & Carb. to CF1 28 084.373 1 Chrome cover 1969-’72 29 162.110 2 Screw 30 084.221 1 Lens, LH 31 084.220 1 Lens, RH 32 084.298 2 Contact & spring 33 084.074 2 Bulb 34 084.222 1 Gasket, mounting 35 122.039 2 Sleeve, rubber

ILL N° PART N° QTY DESCRIPTION APPLICATION

36 163.292 2 Washer, plain 37 164.015 2 Washer, spring 38 161.024 2 Nut 39 122.180 1 Grommet, in rear outer valance 40 122.026 1 Plug, rear inner valance 41 084.374 2 Number plate lamp, valance PI CR1 on & 42 084.079 2 Bulb Carb. CF1 on 43 084.375 2 Plinth, plastic, lamp to rear valance 44 162.505 4 Screw 45 168.108 4 Washer, fibre 46 161.315 4 Nut, spire 47 084.096 1 Interior lamp PI to CR1 & 48 084.097 1 Cover & lens Carb. to CF1 49 084.079 1 Bulb 50 150.364 1 Plinth ass’y, trimmed, black 159.373 1 Plinth ass’y, trimmed, matador red 159.374 1 Plinth ass’y, trimmed, light tan 159.375 1 Plinth ass’y, trimmed, shadow blue 159.376 1 Plinth ass’y, trimmed, new tan 159.377 1 Plinth, bare 51 162.338 4 Screw 52 163.037 4 Washer, cup 53 162.295 2 Screw 54 084.132 1 Courtesy lamp bulb holder PI to CP50000 & 55 084.123 1 Bulb, screw-in Carb. to CC50000 56 135.288 1 Bracket, bulb holder 57 162.588 1 Screw 58 172.569 1 Nut, spire 59 084.135 1 Bulb holder, sleeve fitting, bayonet PI to CR1 & 60 084.126 1 Bulb, bayonet Carb. to CF1 61 172.475 1 Bracket, bulb holder 62 172.958 1 Bracket, bulb holder Alternative 63 084.132 1 Glove box bulb holder, screw-in bulb 64 084.123 1 Bulb, screw-in 65 084.433 1 Heater lamp & bezel Carb. CF1 on 66 084.130 1 Bulb 67 165.714 2 Screw 68 164.015 2 Washer, spring 69 084.376 1 Boot lamp 70 084.848 1 Bulb 71 162.295 2 Screw 72 172.168 2 Clip, lamp to boot trim board 73 084.602 1 Bulb kit 7 pieces spare bulb kit

Number plate lampup to 1972

Heater control lamp

Reflector

Key lamp

N°plate lamp 1972 on

Courtesy lamp

Interior lamp

Glove box lamp

Boot lamp

84© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Dashboards and glove box

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 151.359 1 LHD panel, walnut veneer PI to CP75000 & Carb. to CC75000 151.360 1 LHD panel, walnut veneer 1972 early with hazard switch hole 15/16" x 1 5/8" 151.361 1 LHD panel, walnut veneer 1972 late 151.362 1 LHD panel, walnut veneer CF1 to CF35000 with two warning lamp 1973 to 1975 151.363 1 LHD panel, walnut veneer CF35000 on with three warning lamp 1975 on 151.903 1 RHD panel, walnut veneer Early PI chrome hinges & lock 151.904 1 RHD panel, walnut veneer PI to CP75000 black hinges & lock 151.905 1 RHD panel, walnut veneer PI CP75001 to CR1 151.906 1 RHD panel, walnut veneer PI CR1 on 2 131.623 1 LHD dash panel, metal PI to CR1 & Carb. to CF1 131.493 1 LHD dash panel, metal PI CR1 on & Carb. CF1 on 138.151 1 RHD dash panel, metal TR5 138.152 1 RHD dash panel, metal TR6 PI to CR1 138.153 1 RHD dash panel, metal TR6 PI CR1 on 3 161.019 5 Nut 4 164.012 5 Washer, spring 5 163.081 5 Washer, plain 6 162.077 2 Screw 7 164.012 2 Washer, spring 8 135.280 1 Plate, wiper switch PI to CR1 & 9 162.804 2 Screw Carb. to CF1 10 135.281 1 Plate, light switch PI CR1 on & 11 162.804 2 Screw Carb. CF1 on 12 135.284 1 Bracket, panel light switch PI to CR1 & Carb. to CF1 135.285 1 Bracket, panel light switch PI CR1 on & 13 162.804 2 Screw Carb. CF1 on 14 135.282 1 Bracket, hazard light switch PI to CP75000 & Carb. to CC75000 135.283 1 Bracket, hazard light switch PI CP75000 on & 15 162.804 2 Screw Carb. CC75001 on 16 137.614 1 Hinge kit, chrome TR5, TR250 & early TR6 137.615 1 Hinge kit, black TR6 17 141.299 2 Hinge, chrome TR5, TR250 & early TR6 135.286 2 Hinge, black TR6 18 162.803 10 Screw, chrome TR5, TR250, early TR6 165.726 10 Screw, black TR6 19 162.701 4 Screw

ILL N° PART N° QTY DESCRIPTION APPLICATION

20 141.297 1 Check link, metal 135.273 1 Check link, plastic 21 162.805 2 Screw 22 162.494 2 Screw 23 135.275 1 Bracket for buffer 24 122.248 1 Rubber buffer 25 162.804 2 Screw, wood 26 141.295 1 Lock, chrome PI to CP75000 & Carb. to CC75000 141.298 1 Lock, black PI CP75000 on & Carb. CC75001 on 27 133.879 1 Striker 28 162.061 2 Screw 29 137.616 1 Chrome screw kit TR5, TR250, early TR6 137.617 1 Black screw kit TR6 30 162.829 5 Screw, chrome TR5, TR250, early TR6 162.473 5 Screw, black TR6 31 163.136 5 Washer, cupped, chrome 163.068 5 Washer, cupped, black 32 063.177 1 Vent control lever TR5, TR250, early TR6 063.192 1 Vent control lever TR6 33 063.178 1 Knob 34 162.828 1 Screw 35 172.454 1 Rivet 36 161.413 1 Retainer 37 164.061 1 Washer, double coil 38 132.764 1 Support channel 39 162.076 1 Screw 40 164.012 1 Washer, spring 41 163.010 1 Washer, plain 42 162.060 2 Screw 43 164.015 2 Washer, spring 44 163.013 2 Washer, plain 45 150.306 1 Glove box 46 163.303 1 Retainer 47 172.236 3 Rivet 48 162.061 6 Screw 49 172.474 6 Nut, spire 50 086.145 1 Glove box switch 51 122.423 1 Rubber buffer 52 084.123 1 Bulb 53 084.132 1 Bulb holder 54 141.296 1 Pull piece

More info page 157

85© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

16

Crash pads and louvres

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 150.338 1 Plinth, switches, 4 hole TR5, TR250 150.379 1 Plinth, switches, 5 hole PI to CP50000 & Carb. to CC50000 150.341 1 Plinth, switches, 4 hole PI CP50001 on & 2 162.076 1 Screw Carb. CC50000 on 3 164.012 1 Washer, spring 4 162.157 2 Screw 5 172.965 2 Nut, spire 6 135.207 1 Filler bracket TR5, TR250, TR6 P.I. 135.271 1 Filler bracket TR6 Carb. 7 162.005 2 Screw 8 163.284 2 Washer, plain 9 161.012 2 Nut, nyloc 10 162.022 2 Screw TR5, TR6 162.426 2 Screw, chrome TR250 11 163.139 2 Washer, plain 12 163.001 2 Washer, plain 13 161.012 2 Nut, nyloc 14 133.867 2 Plastic cap, black 15 151.341 1 Bracket, support to chassis TR5, TR250 151.355 1 Bracket, support to chassis TR6 PI to CR1 & Carb to CF1 136.483 1 Bracket, support to chassis P.I. CR1 on 151.364 1 Bracket, support to chassis Carb. CF1 on 16 159.024 1 Moulded cover, only Early TR250 159.025 1 Moulded cover, only TR5, TR250 159.026 1 Moulded cover, only TR6 1969 to 1972 159.027 1 Moulded cover, only TR6 1973 on 17 162.127 4 Screw 18 164.012 4 Washer, spring 19 163.097 4 Washer, plain 20 083.584 1 Radio blanking plate, fine grain TR5, TR250, TR6 PI to CR1 Carb to CF1 133.857 1 Radio blanking plate, coarse grain PI CR1 on & Carb. CF1 on 21 162.140 2 Screw, chrome 162.806 2 Screw, black Alternative 22 163.013 2 Washer, plain 23 164.015 2 Washer, spring 24 161.024 2 Nut 25 150.337 1 LH Crash pad, when no steering PI LHD to CP50000 & column lock is fitted Carb. to CC50000, RHD 150.340 1 LH Crash pad, when a steering PI LHD CP50001 on & column lock is fitted Carb. CC50001 o

ILL N° PART N° QTY DESCRIPTION APPLICATION

26 150.339 1 RH Crash pad RHD & LHD to CP50000 150.938 1 RH Crash pad, when a steering lock RHD CP50001 on is fitted 27 161.024 6 Nut 28 164.015 6 Washer, spring 29 163.116 6 Washer, plain 30 151.337 1 Dash top padded, cut out ash tray hole if needed 31 141.254 1 Ashtray 32 150.930 1 Crash pad, ignition 1970-’76 33 135.272 1 Clip 34 163.013 1 Washer, plain 35 164.015 1 Washer, spring 36 161.024 1 Nut 37 133.872 2 Louver, metal PI to CP50000 & 38 135.276 2 Clamping ring Carb. to CC50000 39 135.277 4 Clamp 40 161.460 4 Nut, knurled 41 164.023 4 Washer, spring 42 133.873 2 Dash louver, metal PI CP50001 to CR1 & Carb. CC50000 to CF1 133.866 2 Dash louver, plastic PI CR1 on & Carb. CF1 on 43 133.865 2 Ring, rubber, sealing PI CP50001 on & Carb. CC50000 on 44 133.872 2 Foot louver, metal PI to CP50000 & Carb. to CC50000 133.873 2 Foot louver, plastic PI CP50001 to CR1 & Carb. CC50000 to CF1 45 135.278 1 RH bracket 135.279 1 LH bracket 46 162.138 4 Screw 47 172.964 4 Nut, spire 48 162.647 2 Screw 49 161.024 2 Nut 50 164.015 2 Washer, spring 51 163.013 2 Washer, plain

More info page 92

up to 1970

1970 on

86© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Instruments to CR1/CF1

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 086.812 1 Temperature BT2215/00 2 083.454 1 Glass, flat 3 086.317 1 Rubber gasket 4 161.057 1 Nut, thumb 5 164.023 1 Washer, shakeproof 6 086.252 1 Strap 7 084.133 2 Bulb holder 8 084.123 1 Bulb 9 012.084 1 Temperature transmitter 10 086.605 1 Oil pressure PL2302/33 11 083.454 1 Glass, flat 12 086.317 1 Rubber gasket 13 161.057 1 Nut, thumb 14 164.023 1 Washer, shakeproof 15 086.252 1 Strap 16 084.133 1 Bulb holder 17 084.123 1 Bulb 18 101.443 1 Nylon pipe, adaptor/instrument. P.I. ferrule female 101.210 1 Nylon pipe, eng. block/instrument. Carb. ferrule male 19 011.423 1 Adaptor P.I. 20 168.052 1 Washer, leather 21 122.193 1 Grommet 22 172.289 1 Clip 23 162.786 1 Screw 24 013.353 1 Oil pressure switch 013.768 1 Oil pressure switch 20PSI 25 086.813 1 Fuel gauge BF2221/00 26 083.454 1 Glass, flat 27 086.317 1 Rubber gasket 28 161.057 1 Nut, thumb 29 164.023 1 Washer, shakeproof 30 086.252 1 Strap 31 084.133 1 Bulb holder 32 084.123 1 Bulb 33 086.818 1 Ammeter LUCAS 36427 34 083.454 1 Glass, flat 35 086.317 1 Rubber gasket 36 161.057 1 Nut, thumb 37 164.023 1 Washer, shakeproof 38 086.252 1 Strap

ILL N° PART N° QTY DESCRIPTION APPLICATION

39 084.133 1 Bulb holder 40 084.123 1 Bulb 41 Speedometer 086.808 1 MPH SN6409/06 3.45:1 rear axle 086.807 1 KPH SN6409/07 3.45:1 rear axle 086.810 1 MPH SN6409/10 3.7:1 rear axle 086.809 1 KPH SN6409/11 3.7:1 rear axle 42 086.051 1 Glass, flat 43 122.427 1 Rubber gasket 44 161.520 2 Nut, thumb 45 164.023 2 Washer, shakeproof 46 135.277 2 Strap 47 086.052 2 Bulb holder 48 084.123 1 Bulb, speedometer 49 084.123 1 Bulb, high beam & indicator 50 086.126 1 Reset cable 51 083.091 1 Voltage stabiliser 52 162.980 1 Screw 53 134.043 1 LHD speedo cable, 69" 178 cm. 083.458 1 RHD speedo cable, 63" 160 cm. overdrive 134.043 1 RHD speedo cable, 69" 178 cm. non-overdrive 54 122.016 2 Grommet 55 172.433 1 CLIP, cable to chassis 56 172.086 1 LHD clip non-overdrive 57 172.496 1 Cleat 58 023.154 1 Angle drive 59 086.811 1 Tachometer RN2413/00A 60 086.051 1 Glass, flat 61 122.427 1 Rubber gasket 62 161.520 2 Nut, thumb 63 164.023 2 Washer, shakeproof 64 135.277 2 Strap 65 086.052 2 Bulb holder 66 084.123 1 Bulb, tachometer 67 084.123 1 Bulb, indicator & warning lights 68 086.771 1 LHD tacho cable, 36" 91 cm. 083.462 1 RHD tacho cable, 48" 122 cm. 69 122.016 1 Grommet 70 172.496 1 Cleat

TR5-6 1973black ring on the instruments

87© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Dash switches and choke cable to CR1/CF1

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 083.625 1 Dash knob set, Europe 1967-’73 USA 1967-’72 2 083.626 1 Dash knob set, USA 1972 Carb. CC75001 on 4 101.446 1 Choke cable P.I. 101.444 1 Choke cable Carb. to CC75000 101.286 1 Choke cable Carb. CC75001 on 5 161.410 1 Bezel 6 164.050 1 Washer, shakeproof 7 161.716 1 Nut 8 086.132 1 Knob, choke, symbol type P.I. Carb. to CC50000 9 086.133 1 Knob, choke, written type Carb. CC50001 on 10 122.180 1 Grommet 11 172.274 1 Clip 12 172.945 1 Cleat 13 083.608 1 Rheostat switch 16 083.609 1 Bezel, early TR5, TR250 17 086.819 1 Bezel, late TR5, TR250, TR6 18 122.264 1 Washer 19 083.872 1 Knob, rheostat, panel light 21 135.284 1 Bracket, switch 22 162.804 2 Screw 23 083.764 1 Windscreen wiper switch, Clear Hooters TR5, TR250, (3 terminal) 083.765 1 Windscreen wiper switch, Clear Hooters TR6 up to ‘72 (4 terminal)

ILL N° PART N° QTY DESCRIPTION APPLICATION

24 083.766 1 Windscreen wiper switch, Lucas Carb. CC75001 on 25 086.795 1 Windscreen washer switch P.I. & Carb. to CC75000 083.823 1 Windscreen washer switch Carb. CC75001 on 26 086.127 2 Escutcheon, clear hooter switches 27 135.280 2 Plate 28 162.804 4 Screw 29 086.337 1 LHD hazard switch, Lucas 35857A P.I. to CP75000 & Carb. to CC75000 083.551 1 LHD hazard switch, Lucas 39665 P.I. CP75001 on & Carb. CC75001 on 30 135.282 1 Plate P.I. to CP75000 & Carb. to CC75000 135.283 1 Plate P.I. CP75001 on & Carb. CC75001 on 31 162.804 4 Screw 32 083.807 1 Warning lamp, hazard 33 083.807 1 LHD Warning lamp, brake PDWA 34 086.052 2 Bulb holder 35 084.123 1/2 Bulb 36 086.867 1 Warning lamp, seat belt Carb. CC75001 on 37 084.126 1 Bulb 38 083.913 1 Ignition switch P.I. to CP50000 & 41 083.610 1 Bezel 42 083.035 1 Barrel & key

Symbol type knob set Written type knob set, USA 1972

For heater controls see page 93For column switches see page 64

Early type bezel

Late type bezel

88© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Instruments from CR1/CF1

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 083.520 1 Temperature BT2230/00 2 083.454 1 Glass, flat 3 086.317 1 Rubber gasket 4 161.057 1 Nut, thumb 5 164.023 1 Washer, shakeproof 6 086.252 1 Strap 7 084.133 1 Bulb holder 8 084.123 1 Bulb 9 012.084 1 Temperature transmitter 10 086.829 1 Oil pressure PL2319/00 11 083.454 1 Glass, flat 12 086.317 1 Rubber gasket 13 161.057 1 Nut, thumb 14 164.023 1 Washer, shakeproof 15 086.252 1 Strap 16 084.133 1 Bulb holder 17 084.123 1 Bulb 18 101.443 1 Nylon pipe, adaptor/instrument. P.I. ferrule female 101.210 1 Nylon pipe, eng. block/instrument. Carb. ferrule male 19 011.423 1 Adaptor 20 168.052 1 Washer, leather 21 122.193 1 Grommet 22 172.289 1 Clip 23 162.786 1 Screw 24 013.074 1 Oil pressure switch P.I. 013.768 1 Oil pressure switch 20PSI 25 012.343 1 Oil pressure switch Carb. 26 083.590 1 Fuel gauge BF2232/00 27 083.454 1 Glass, flat 28 086.317 1 Rubber gasket 29 161.057 1 Nut, thumb 30 164.023 1 Washer, shakeproof 31 086.252 1 Strap 32 084.133 1 Bulb holder 33 084.123 1 Bulb 34 086.830 1 Voltmeter BV2213/00 35 083.454 1 Glass, flat 36 086.317 1 Rubber gasket 37 161.057 1 Nut, thumb 38 164.023 1 Washer, shakeproof 39 086.252 1 Strap 40 084.133 1 Bulb holder 41 084.123 1 Bulb

ILL N° PART N° QTY DESCRIPTION APPLICATION

42 Speedometer 086.823 1 MPH SN6411/04 3.45:1 rear axle 086.822 1 KPH SN6411/05 3.45:1 rear axle 086.824 1 KPH SN6411/09 3.45:1 rear axle Australia 086.825 1 MPH SN6411/06 3.7:1 rear axle 086.827 1 MPH SN6411/11 3.7:1 rear axle 086.826 1 KPH SN6411/07 3.7:1 rear axle 43 086.051 1 Glass, flat 44 122.427 1 Rubber gasket 45 161.520 2 Nut, thumb 46 164.023 2 Washer, shakeproof 47 135.277 2 Strap 48 086.052 2 Bulb holder 49 084.123 2 Bulb, speedometer 50 084.123 2 Bulb, high beam & indicator 51 086.126 1 Reset cable 52 083.091 1 Voltage stabiliser 53 162.980 1 Screw 54 134.043 1 LHD speedo cable, 69" 178 cm. 083.458 1 RHD speedo cable, 63" 160 cm. overdrive 134.043 1 RHD speedo cable, 66" 167 cm. non-overdrive 55 083.463 1 LHD upper speedo cable, 15” 38 cm. Carb. CF35000 on 56 083.464 1 LHD lower speedo cable, 52” 132 cm. 57 086.128 1 Service interval counter Carb. CF35000 on 58 162.060 2 Screw 59 163.013 2 Washer, plain 60 164.015 2 Washer, spring 61 161.024 2 Nut 62 137.909 1 Bracket 63 122.016 1 Grommet 64 172.433 1 Clip, cable to chassis 65 172.086 1 LHD clip, clip non-overdrive 66 172.496 1 Cleat 67 023.154 1 Angle drive 68 086.828 1 Tachometer RN2414/00A 69 086.051 1 Glass, flat 70 122.427 1 Rubber gasket 71 161.520 2 Nut, thumb 72 164.023 2 Washer, shakeproof 73 135.277 2 Strap 74 086.052 2 Bulb holder 75 084.123 2 Bulb, tachometer 76 084.123 2 Bulb, indicator & warning lights 77 086.771 1 LHD tacho cable, 36" 91 cm. 083.462 1 RHD tacho cable, 48" 122 cm. 78 122.016 1 Grommet 79 172.496 1 Cleat

TR6 1973 onChrome ring on the instruments

89© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Dash switches and choke cable from CR1/CF1

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 083.627 1 Dash knob set, symbol type P.I. 2 083.628 1 Dash knob set, written type Carb. 3 101.446 1 Choke cable P.I. 101.286 1 Choke cable Carb. to CF12500 101.445 1 Choke cable, stiff inner cable Carb. CF12501 on 4 161.410 1 Bezel 5 164.050 1 Washer, shakeproof 6 161.716 1 Nut 7 086.132 1 Knob, choke P.I. 8 086.133 1 Knob, choke Carb. 9 122.180 1 Grommet 10 172.274 1 Clip, cable retaining 11 172.945 1 Cleat 12 083.038 1 Rheostat switch 15 086.819 1 Bezel 17 086.820 1 Knob, rheostat 18 135.284 1 Bracket, switch 19 162.804 2 Screw 20 083.826 1 Windscreen wiper/washer switch 21 086.154 1 Tube, distance 22 086.155 1 Nut 24 083.583 1 Bezel 26 086.263 1 Knob, wiper/washer 27 083.751 1 LHD hazard switch 28 086.140 1 Knob

ILL N° PART N° QTY DESCRIPTION APPLICATION

29 084.126 1 Bulb 30 086.831 1 LHD Warning lamp, brake PDWA Carb. to body no. 34067CF 083.809 1 LHD Warning lamp, brake PDWA Carb. body no. 34068CF on 31 084.115 1 Bulb holder 32 084.123 1 Bulb 33 083.779 1 Warning lamp, ‘Wipe/Wash’ Carb. 34 086.866 1 Warning lamp, ‘Hazard’ Carb. to body no. 34067CF 083.808 1 Warning lamp, ‘Hazard’ Carb. body no. 34068CF on 35 083.809 1 Warning lamp, ‘Brake’ Carb. body no. 34068CF on 36 086.867 1 Warning lamp, ‘Fasten Belts’ Carb. to body no. 34067CF 083.161 1 Warning lamp, ‘Fasten Belts’ Carb. body no. 34068CF on 37 086.868 1 Warning lamp, ‘EGR’ Carb. CF12501 to body no. 34067CF 083.806 1 Warning lamp, ‘EGR’ Carb. body no. 34068CF on 38 084.126 4 Bulb 40 083.778 1 Light switch, Clear Hooters 41 086.127 1 Escutcheon 42 135.280 1 Plate 43 162.804 2 Screw 44 083.295 1 Light switch, Lucas Replaces 083.778 45 135.281 1 Plate 46 162.804 2 Screw 47 086.232 1 Interior light switch 50 161.417 1 Bezel 52 083.769 1 Knob

For heater controls see page 93For column switches see page 64

European 1973-’76

USA 1973-’76

90© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Windscreen wipers

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 082.061 1 Wiper motor TR5 & TR250 2 081.916 1 Brush gear 3 083.197 1 Brush set 7 081.918 1 Parking switch 8 083.976 1 Connection link 9 083.639 1 Gear & shaft 10 081.914 1 Cover 11 081.915 2 Bolt 12 086.791 1 Sundry parts kit 13 133.344 3 Mounting kit, includes buffer, stud, washer & nut 14 122.048 3 Grommet 15 137.490 1 Bracket 16 162.065 2 Screw 17 164.012 2 Washer, spring 18 163.011 2 Washer, plain 19 162.076 1 Screw 20 164.012 1 Washer, spring 21 163.011 1 Washer, plain 22 082.006 1 Wiper motor without shaft, gear & link TR6. 23 172.698 1 Clip 24 083.523 1 Brush gear Lucas nos. 75664A and 75664B 083.853 1 Brush gear Lucas nos. 75664D and 75664F 25 083.525 1 Parking switch screw on type Lucas nos. 75664A and 75664B 086.174 1 Parking switch clip on type Lucas nos. 75664D and 75664F 26 083.527 1 RHD Gear, shaft & connection link 083.526 1 LHD Gear, shaft & connection link 27 133.138 1 Pad, mounting 28 133.137 1 Strap & rubber 29 122.426 1 Rubber strip 30 162.076 2 Screw

ILL N° PART N° QTY DESCRIPTION APPLICATION

31 164.012 2 Washer, spring 32 163.081 2 Washer, plain 33 083.024 1 Rack, cut to length 34 083.644 1 Male ferrule TR5 & TR250 083.825 1 Male ferrule TR6 35 083.025 1 Tubing, motor to wheelbox TR5 & TR250 083.983 1 Tubing, motor to wheelbox TR6 36 083.984 1 Tubing, wheelbox to wheelbox TR5 & TR250 134.750 1 Tubing, wheelbox to wheelbox TR6 37 133.136 1 Tubing, wheelbox end 38 133.584 A/R Tubing, cut to length 39 122.197 1 Grommet 40 083.023 2 Wheelbox assembly TR5 & TR250 41 083.104 2 Wheelbox assembly TR6. 42 083.021 2 Nut, 6 sides TR5 & TR250 43 083.106 2 Nut, 8 sides TR6. 44 087.033 1 LHD wiper arm, drivers side, 5.2mm TR5 & TR250, stainless steel 087.037 1 LHD wiper arm, drivers side, 7mm TR6 up to 1972, stainless steel 087.034 1 LHD wiper arm, drivers side, 7mm TR6 1972 on, black 45 087.032 1 LHD wiper arm, passenger side, 5.2mm TR5 & TR250, stainless steel 087.036 1 LHD wiper arm, passenger side, 7mm TR6 up to 1972, stainless steel 087.035 1 LHD wiper arm, passenger side, 7mm TR6 1972 on, black 46 087.001 2 Wiper blade, 5.2mm TR5 & TR250, stainless steel 087.038 2 Wiper blade, 7mm TR6 up to 1972, stainless steel 087.039 2 Wiper blade, 7mm TR6 1972 on, black 47 087.044 1 RHD wiper arm, drivers side, 5.2mm TR5, stainless steel 087.049 1 RHD wiper arm, drivers side, 7mm TR6 up to 1972, stainless steel 087.048 1 RHD wiper arm, drivers side, 7mm TR6 1972 on, black 48 087.043 1 RHD wiper arm, pass. side, 5.2mm TR5, stainless steel 087.050 1 RHD wiper arm, pass. side, 7mm TR6 up to 1972, stainless steel 087.047 1 RHD wiper arm, pass. side, 7mm TR6 1972 on, black

TR5/250

TR6TR5/TR250 TR6

LHD

RHD

TR6

91© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Windscreen washer & horns

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 086.598 1 Washer bottle assembly PI to CP50000 & 2 083.612 1 Motor & lid assembly Carb. to CC50000 3 083.294 1 Motor 4 062.014 A/R Tubing, pump 1 meter lenght 5 083.054 1 Non return valve 6 083.613 1 Oval Bottle 7 083.761 1 Cap, filler 8 133.703 1 Bracket & strap 9 083.999 1 Washer bottle assembly PI CP50001 on & 10 083.612 1 Motor & lid assembly Carb. CC50001 on 11 083.294 1 Motor 12 062.014 A/R Tubing, pump 1 meter lenght 13 083.054 1 Non return valve 15 086.158 1 Square bottle 16 083.575 1 Bracket & strap 17 161.463 3 Fastener, nut & screw 18 502452 3 Washer, plain 19 080.363 1 Lead, washer motor PI CR1 on & Carb. CF1 on 20 083.467 1 Jet & bush kit

ILL N° PART N° QTY DESCRIPTION APPLICATION

21 083.452 1 Upper bush & jet kit, LH 22 083.451 1 Upper bush & jet kit, RH 25 083.056 1 T’ piece 27 122.180 1 Grommet 29 086.806 1 T’ piece 31 122.180 1 Grommet 32 083.055 1 Tubing set, two diameters 33 086.285 1 Horn, low note 34 086.284 1 Horn, high note 35 135.670 2 Plate 36 162.076 4 Screw 37 164.012 4 Washer, spring 38 163.081 4 Washer, plain 39 161.019 4 Nut 40 083.120 1 Relay, horn 41 162.139 2 Screw 42 163.013 2 Washer, plain 43 164.015 2 Washer, spring 44 161.024 2 Nut

Low note

High note

92© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Molded recovering pads for Triumph dash support consolesFour types are available which can either be glued or taped to the original cast aluminium core (base). Assembly requires removal of the part from the car, stripping the old cover from the core and glueing or taping the ‘New’ padded skin to the casting prior to reinstallation. Once complete the parts is undetectable from the original and costs less than half of a new assembly.

TR4A Partnr.: 159.024

Has rounded sides and 3 switch holes under the radio. Note - the early aluminium castings have a raised lip surrounding the shutter which must be removed to

accomodate the new pad.

TR250Partnr.: 159.025

Has also rounded sides but no switch holes below the radio. Note - early TR250 may have used TR4A type 159.024.

TR6 1969-’72 Partnr.: 159.026

Has flat sides to accomodate console trim panel under dash and no switch under radio. Note - early TR6 may have

TR250 (159.025) console fitted!

TR6 1973 Partnr.: 159.027

Has flat sides and one switch under radio

Recovering pads for dash support consoles

93© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 063.154 1 Heater assembly 2 063.111 1 Radiator, heater 3 063.155 1 Motor, heater 4 086.837 1 Fan, heater 5 172.961 1 Spire clip 6 152.204 3 Rivet 7 122.429 3 Grommet 8 137.498 1 Cradle, fan motor 9 162.822 3 Screw 10 086.838 1 Resistor 11 167.037 2 Rivet 12 137.499 1 Fitting kit 13 122.430 1 Rubber seal 14 162.670 3 Screw 15 163.138 3 Washer, plain 16 122.048 3 Grommet 17 163.293 3 Washer, plain 18 135.129 3 Spacer 19 161.019 1 Nut 20 163.294 1 Washer, plain 21 168.137 1 Washer, rubber 22 085.380 1 Nameplate, “Smith’s” 23 085.007 1 Warning plate 24 063.148 1 Pipe, water return, stainless steel P.I. models. 25 063.088 1 Pipe, water return, stainless steel Carb. models. 26 161.265 1 Tube nut 27 161.266 1 Olive 28 063.059 1 Valve, heater 29 063.106 1 Adaptor 30 172.056 1 Cable clamp 31 162.135 1 Screw 32 134.197 1 Control cable, heater 33 122.153 1 Grommet 34 063.191 1 Bezel 35 086.136 1 Knob, heater, symbol P.I. Models & Carb. to CC67893. 36 086.137 1 Knob, heater, written Carb. CC75001 on. 37 172.056 1 Cable clamp 38 162.135 1 Screw 39 134.196 1 Control cable, air 40 063.191 1 Bezel 41 086.134 1 Knob, air control, symbol P.I. Models & Carb. to CC67893.

ILL N° PART N° QTY DESCRIPTION APPLICATION

42 086.135 1 Knob, air control, written Carb. CC75001 on. 43 083.085 1 Switch, heater fan 44 083.609 1 Bezel 45 164.113 1 Washer 46 086.138 1 Knob, fan, symbol P.I. Models & Carb. to CC67893. 47 086.139 1 Knob, fan, written Carb. CC75001 on. 48 063.066 1 Hose, outlet 49 063.065 1 Hose, inlet 50 172.026 4 Clamp, wire type 51 063.064 1 Pad, rubber 52 063.063 1 Double pipe connector 063.440 1 Double pipe connector, stainless steel 53 165.716 2 Screw 54 172.080 2 Spire nut 55 062.270 1 Hose, water, feed 56 062.271 1 Hose, water, return 57 172.026 4 Clamp, wire type 58 063.149 2 Demister finisher 59 163.013 4 Washer, plain 60 164.015 4 Washer, spring 61 161.024 4 Nut 62 063.159 1 RH Duct, demister 063.160 1 LH Duct, demister 63 063.113 1 RH hose 063.179 1 LH hose 64 172.952 4 Clamp, wire type 65 063.114 2 Air hose to ‘Y’ piece 66 063.118 4 Air hose, ‘Y’ piece to louvers 67 172.120 12 Clamp, wire type 172.473 1 Clamp, driver’s side 68 122.431 1 Sleeve 69 063.115 2 Y’ piece 70 133.872 2 Louver, fresh air, metal P.I. to CP50000 & Carb. to CC50000. 133.873 2 Louver, fresh air, plastic P.I. CP50000 to CR1 & Carb. CC50000 to CF1. 133.866 2 Louver, fresh air, plastic P.I. CR1 on & Carb. CF1 on. 71 133.872 2 Louver, footwell, metal P.I. to CP50000 & P.I. CP50000 on & 133.873 2 Louver, footwell, plastic Carb. CC50000 on.

Heater installation

P.I.

Carb.

94© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Chassis

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 132.738 1 Skid plate 2 137.527 4 Clamp plate 3 164.006 4 Washer, spring 4 161.026 4 Nut 5 134.350 1 Top cross tube P.I. to CR1 & Carb. to CF1 134.351 1 Top cross tube P.I. CR1 on & Carb. CF1 to CF35000 134.352 1 Top cross tube Carb. CF35001 on 6 162.524 6 Screw 7 164.006 6 Washer, spring 8 132.570 1 Radiator shield P.I. & Carb. to CF35000 136.443 1 Radiator shield Carb. CF35001 on 9 162.524 2 Screw 10 164.006 2 Washer, spring 11 161.026 2 Nut 12 135.249 2 Bumper support strut bracket Carb. CF35001 on 13 162.005 4 Screw 14 164.002 4 Washer, spring 15 163.001 4 Washer, plain 16 132.739 1 Gearbox mounting crossmember P.I. to CR1 & Carb. to CF1 17 024.311 1 Gearbox mounting crossmember P.I. CR1 on & Carb. CF1 on 18 135.251 2 Plate, adjusting P.I. CR1 on & Carb. CF1 on 19 162.056 4 Screw 162.211 4 Screw, use with 135.251 20 163.088 8 Washer, plain 21 164.006 4 Washer, spring 22 161.026 4 Nut 23 122.432 1 Plug 24 130.044 1 Chassis assembly P.I. to CR1 & Carb. to CF1 130.045 1 Chassis assembly P.I. CR1 to CR5000 & Carb. CF1 to CF12500 130.161 1 Chassis assembly P.I. CR5001 to CR6020 & Carb. CF12500 to CF21500 130.045 1 Chassis assembly P.I. CR6020 on & Carb. CF21501 on 25 134.751 1 Front crossmember 26 137.503 1 LH mounting bracket 27 137.502 1 RH mounting bracket 28 137.505 1 LH radiator mounting bracket 29 137.504 1 RH radiator mounting bracket 30 135.143 4 Lower wishbone bracket 31 138.119 1 Front suspension crossmember 32 136.437 1 LH suspension turret 33 136.436 1 RH suspension turret 34 136.439 1 LH front diagonal bar 35 136.438 1 RH front diagonal bar 134.329 2 Front diagonal bar, replacement

ILL N° PART N° QTY DESCRIPTION APPLICATION

36 137.506 2 Front brake hose bracket 37 137.508 1 LH engine mounting bracket 38 137.507 1 RH engine mounting bracket 39 137.509 1 Front brake union bracket 40 135.146 2 Front body mounting bracket 41 135.147 1 LH scuttle bracket 42 135.148 1 RH scuttle bracket 43 137.510 2 Body mounting bracket, sill, front 44 137.512 1 LH body mounting bracket, sill, rear 45 137.511 1 RH body mounting bracket, sill, rear 46 130.162 2 Front side member 47 138.118 1 LH outrigger, trailing arm 48 138.117 1 RH outrigger, trailing arm 49 132.740 2 Outrigger, trailing arm, replacement 50 136.433 1 LH rear side member P.I. to CR5000 & 51 136.432 1 RH rear side member Carb. to CF12500 52 137.500 1 T’ piece bracket 136.435 1 LH rear side member P.I. CR5001 to CR6020 & 136.434 1 RH rear side member Carb. CF12500 to CF21500 53 137.501 2 Plate, serrated 136.433 1 LH rear side member P.I. CR6020 on & 136.432 1 RH rear side member Carb. CF21501 on 54 137.514 1 LH gearbox mounting bracket TR5; TR250; 55 137.513 1 RH gearbox mounting bracket TR6 all CP/CC models 56 137.515 2 Gearbox mounting bracket TR6 all CR/CF models 57 132.552 1 Upper cruciform plate 58 132.551 1 Lower cruciform plate 59 137.516 1 Rear brake union bracket 60 137.517 1 Rear brake hose bracket 61 134.650 1 Rear suspension crossmember 62 167.158 2 Stud, axle mounting 63 137.518 2 Axle mounting bracket 64 136.442 1 LH support bracket 65 136.441 1 RH support bracket 66 135.152 1 LH rebound stop bracket 67 135.151 1 RH rebound stop bracket 68 132.742 1 Rear axle crossmember 69 135.153 2 Rear damper mounting 70 162.765 2 Stud, rear axle mounting 71 137.519 2 Axle mounting bracket 72 138.120 1 Rear chassis repair 73 132.735 1 Rear cross tube 74 135.211 1 Exhaust mounting bracket 75 135.250 2 Rear bumper bracket 76 137.520 1 LH anchorage bracket P.I. CR1 on & 137.521 1 RH anchorage bracket Carb. CF1 on

95© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Body mounting and reinforcements

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 133.655 1 Body mounting kit 2 121.649 2 Protection strip 3 121.650 2 Protection strip 4 121.649 2 Protection strip 5 122.212 4 Rubber/canvas pad, thin 6 161.026 2 Nut 7 167.072 2 Stud 8 164.006 2 Washer, spring 9 163.296 2 Washer, plain 10 122.212 2 Rubber/canvas pad, thin 11 162.699 2 Screw 12 163.005 2 Washer, plain 13 133.941 2 Aluminium pad 14 122.242 2 Rubber/canvas pad, thick 15 163.088 2 Washer, plain 16 164.006 2 Washer, spring 17 161.026 2 Nut 18 122.212 4 Rubber/canvas pad, thin 19 162.483 2 Screw 20 164.002 2 Washer, spring 21 163.133 2 Washer, plain 22 133.674 4 Rubber/canvas pad, square 23 135.154 4 Rubber/canvas pad, triangular 24 162.483 14 Screw 25 164.002 14 Washer, spring 26 163.133 14 Washer, plain 27 162.483 2 Screw 28 164.002 2 Washer, spring

ILL N° PART N° QTY DESCRIPTION APPLICATION

29 135.155 2 Reinforcement plate 30 133.941 2 Aluminium pad 31 122.212 2 Rubber/canvas pad, thin 32 122.242 2 Rubber/canvas pad, thick 33 162.479 2 Screw 34 164.006 2 Washer, spring 35 163.297 2 Washer, plain 36 133.941 2 Aluminium pad 37 162.592 2 Screw 38 164.002 2 Washer, spring 39 163.133 2 Washer, plain 40 133.941 2 Aluminium pad 41 163.089 2 Washer, plain 42 161.026 2 Nut 43 162.546 1 Bolt, hook 44 161.002 1 Nut 45 135.156 1 Reinforcement plate, spare wheel pan 46 122.212 3 Rubber/canvas pad, thin 47 163.001 1 Washer, plain 48 161.012 1 Nut, nyloc 49 135.141 A/R Packing plate, square 50 135.150 A/R Packing plate, triangular 51 137.522 4 Reinforcment plate, lower wishbone 52 135.145 1 LH strengthening kit (3 pieces) Wishbone fixing part 135.144 1 RH strengthening kit (3 pieces) Wishbone fixing part 53 137.479 2 Rear axle reinforcement kit, front 54 137.480 2 Rear axle reinforcement kit, rear

96© V a n G e s t e l B & C 2 0 0 2

TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Body and front end • TR5/TR250

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 130.163 1 LHD body shell 130.164 1 RHD body shell 130.165 1 Transport frame 2 131.424 1 LH inner wing 3 131.423 1 RH inner wing 4 133.927 1 LH front wing filler 133.926 1 RH front wing filler 5 132.366 1 LH splash plate 132.365 1 RH splash plate 6 121.210 2 Rubber seal 7 172.251 6 Clip 8 162.454 10 Screw 162.065 2 Screw, long 9 164.012 12 Washer, spring 10 163.011 12 Washer, plain 11 161.734 4 Retainer, cage for nut 12 161.384 4 Nut, square 13 133.888 A/R Wiring loom tag 14 122.180 2 Grommet 15 133.934 1 Bonnet stay rod bracket 16 137.534 1 LH body lifting bracket 137.533 1 RH body lifting bracket 17 134.753 1 LH stayrod 134.752 1 RH stayrod 18 162.454 4 Screw 19 164.012 4 Washer, spring 20 161.019 2 Nut 21 136.028 2 Air duct valance TR250 only 22 172.939 8 Clip 23 131.369 1 RH Wheel arch 24 131.368 1 LH wheel arch 25 137.531 1 RH upper wheelarch reinforcement 137.532 1 LH upper wheelarch reinforcement 26 136.446 1 RH lower wheelarch reinforcement 136.447 1 LH lower wheelarch reinforcement

ILL N° PART N° QTY DESCRIPTION APPLICATION

27 136.448 1 RH chassis mounting bracket 136.449 1 LH chassis mounting bracket 29 131.527 1 Plenum 30 062.272 2 Drain tube 31 062.129 2 Rubber hose 32 062.127 2 Rubber hose 33 172.377 2 Clip 34 011.066 2 Grommet 35 133.929 2 Wheel box access plate 36 162.157 8 Screw 37 138.121 1 LHD bulkhead TR5, TR250 138.122 1 RHD bulkhead TR5 38 132.382 1 LH bulkhead end panel 39 137.542 1 Bonnet release bracket 40 132.383 1 RH bulkhead end panel 42 134.754 1 LHD vertical repair panel 134.758 1 RHD vertical repair panel 43 134.755 1 Vertical repair panel, bulkhead 44 138.123 1 LHD horizontal repair panel, bulkhead 138.124 1 RHD horizontal repair panel, bulkhead 45 136.451 1 LHD front footwell panel, LH 136.453 1 RHD front footwell panel, LH 46 136.450 1 LHD front footwell panel, RH 136.452 1 RHD front footwell panel, RH 47 137.535 1 RHD steering column strap bracket 137.482 1 LHD steering column strap bracket 48 137.536 2 Wiper mount bracket 49 137.538 1 LH battery stay bracket 50 137.537 1 RH battery stay bracket 51 137.539 1 Bulkhead pocket 52 137.540 1 Bulkhead pocket gusset 53 137.541 1 LH dash gusset 54 161.456 A/R Nut, square 55 161.457 A/R Retainer, cage for nut

97© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Rear, floor and inner panels • TR5/TR250

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 131.381 1 RH floor panel 131.380 1 LH floor panel 2 122.179 2 Rubber plug 3 122.433 2 Grommet, 5/8" 4 122.026 2 Grommet, 1" 5 132.392 1 Propshaft tunnel 6 133.952 1 Handbrake bracket 7 132.574 1 Tunnel cover 8 131.379 1 RH outer sill panel 131.378 1 LH outer sill panel 9 133.570 1 RH sill end filler, front 133.569 1 LH sill end filler, front 10 133.572 1 RH sill end filler, rear 133.571 1 LH sill end filler, rear 11 131.377 1 RH inner sill 131.376 1 LH inner sill 12 133.888 A/R Wiring loom tag 13 132.387 1 RH outer ‘A’ post 132.386 1 LH outer ‘A’ post 14 133.953 2 Spring guide 15 172.382 4 Rivet 16 132.385 1 RH inner ‘A’ post 132.384 1 LH inner ‘A’ post 17 136.459 1 RH ‘B’ post ass. 136.460 1 LH ‘B’ post ass. 18 136.461 1 RH ‘B’ post, front face 136.462 1 LH ‘B’ post, front face 19 132.391 1 RH ‘B’ post, rear face 132.390 1 LH ‘B’ post, rear face 20 137.558 2 Tapped plate 21 137.559 1 RH retainer 137.560 1 LH retainer 22 137.561 1 RH ‘B’ post gusset reinforcement 137.562 1 LH ‘B’ post gusset reinforcement 23 133.575 2 Front sill mounting 24 133.577 1 RH rear sill mounting 133.576 1 LH rear sill mounting 25 135.141 A/R Packing plate, square 26 135.150 A/R Packing plate, triangular

ILL N° PART N° QTY DESCRIPTION APPLICATION

27 131.421 1 RH inner rear wing 28 131.422 1 LH inner rear wing 29 133.888 A/R Wiring loom tag 30 132.450 1 RH tail housing 132.451 1 LH tail housing 31 122.193 2 Grommet 32 132.571 1 RH rear wheel arch 33 132.572 1 LH rear wheel arch 34 163.109 2 Upper seat belt reinforcement 35 137.546 2 Lower seat belt reinforcement 36 137.547 1 RH bump stop bracket 137.548 1 LH bump stop bracket 37 137.549 4 Millboards support bracket 38 133.950 1 RH seat belt anchor 133.951 1 LH seat belt anchor 39 131.382 1 Heelboard 40 138.125 1 Seat pan assembly 41 131.383 1 Seat pan panel 42 136.458 1 Differential cover 43 137.550 2 Seat pan bracket 44 137.551 1 Tunnel cover support bracket 45 133.944 1 RH squab support bracket 46 133.945 1 LH squab support bracket 47 137.552 2 Nut plate 48 137.585 2 Vertical squab support bracket 49 137.553 1 RH arch/floor gusset 137.554 1 LH arch/floor gusset 50 137.555 1 RH fuel tank support bracket 51 132.959 1 LH fuel tank support bracket 52 122.434 1 Plug 53 131.388 1 Boot floor 54 122.026 1 Plug, 1" 55 137.556 1 Metal plate 56 152.205 2 Rivet 57 132.394 1 RH side boot floor 58 132.393 1 LH side boot floor 59 133.578 2 Boot floor mounting bracket 60 122.434 3 Plug

© V a n G e s t e l B & C 2 0 0 2

98 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Outer panels • TR5/TR250

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 131.458 1 Bonnet 2 138.054 1 Upper valance 3 137.528 2 Grille & lamp bracket 4 133.888 A/R Wiring loom tag 5 138.053 1 Lower valance, vented 131.333 1 Lower valance, non-vented 6 131.353 1 LH front wing 7 131.352 1 RH front wing 8 136.445 1 LH splash plate, see page 96 136.444 1 RH splash plate, see page 96 9 133.862 2 Front wing fixing kit 10 162.700 16 Screw 11 161.319 22 Nut, spire 12 162.454 14 Screw 13 162.452 6 Bolt, Acme 14 163.011 20 Washer, plain 15 164.012 16 Washer, spring 16 131.372 1 LH door 131.373 1 RH door 17 131.374 1 LH door skin 131.375 1 RH door skin 18 131.371 1 Scuttle top panel 19 133.563 1 Vent lid 20 137.530 2 Hinge pin 21 133.564 1 Rod 22 172.469 1 Nut, round 23 122.180 1 Grommet 24 172.376 1 Cable clamp 25 162.135 1 Screw 26 133.928 1 Spring 27 162.822 3 Screw 28 164.015 3 Washer, spring 29 121.190 1 Rubber seal

ILL N° PART N° QTY DESCRIPTION APPLICATION

30 131.532 1 Rear deck centre 31 131.531 1 Rear deck centre repair panel 32 136.454 1 Deck support frame 33 133.888 4 Wiring loom tag 34 133.579 1 LH rear deck forward section 133.580 1 RH rear deck forward section 36 133.949 1 LH ‘B’ post gusset 133.948 1 RH ‘B’ post gusset 40 161.458 5 Nut, rivnut 41 131.325 1 Boot lid 42 131.530 1 Boot lid reinforcement 44 162.670 2 Screw 45 163.081 2 Washer, plain 46 164.012 2 Washer, spring 47 161.019 2 Nut 48 132.459 1 LH rear deck rear section 49 132.458 1 RH rear deck rear section 50 133.955 1 Boot lid stay bracket 51 138.089 1 Rear valance with reverse lamp holes 131.425 1 Rear valance without reverse lamp holes 52 133.956 1 Lower tonneau set (4 pieces) 53 131.355 1 LH rear wing 54 131.354 1 RH rear wing 136.457 1 LH baffle, rear 55 136.456 1 RH baffle, rear 56 137.545 2 Rear wing fitting kit 57 172.170 4 Clip 58 163.298 30 Washer, everseal 59 161.319 24 Nut, spire 60 162.454 6 Screw 61 162.452 24 Screw, acme 62 163.011 30 Washer, plain 63 164.012 6 Washer, spring

99© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Bonnet fittings and grille • TR5/TR250

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 140.149 1 Grille 2 162.716 2 Screw 3 164.015 2 Washer, spring 4 168.246 2 Washer, plain 5 161.497 2 Nut 6 134.753 1 LH stayrod 134.752 1 RH stayrod 7 162.454 4 Screw 8 164.012 4 Washer, spring 9 161.019 2 Nut 10 133.600 1 Safety catch assembly 11 137.563 1 Bracket 17 137.566 1 Pin 18 137.567 1 Cup 19 171.100 1 Spring 20 161.735 1 Nut 21 162.076 2 Screw 22 164.012 2 Washer, spring 23 163.138 2 Washer, plain 24 133.933 1 Catch plate assembly 25 162.051 1 Screw 26 163.013 1 Washer, plain 27 161.024 1 Nut 29 162.076 4 Screw 30 164.012 4 Washer, spring 31 163.081 4 Washer, plain 32 134.759 1 Bonnet cable 33 133.838 1 Outer bonnet cable

ILL N° PART N° QTY DESCRIPTION APPLICATION

34 133.837 1 Inner bonnet cable 35 122.180 1 Grommet 36 172.301 1 Clip 37 172.056 1 Trunnion 38 162.135 1 Screw 39 172.289 2 Clip 40 162.061 2 Screw 41 134.217 1 Bonnet prop rod 42 133.934 1 Bonnet prop rod bracket 43 122.194 1 Rubber buffer 44 162.730 1 Screw 45 161.061 1 Nut, nyloc 46 164.043 1 Washer, thackery 47 163.011 1 Washer, plain 48 121.214 1 Sealing rubber, rear 49 133.180 2 Buffer, bonnet 50 161.008 4 Nut 51 163.103 4 Washer, plain 52 122.177 4 Rubber buffer 53 162.504 8 Screw 54 163.052 8 Cup washer 55 122.437 1 Packing 56 133.937 1 LH bonnet hinge 57 133.936 1 RH bonnet hinge 58 162.460 12 Screw 59 164.002 12 Washer, spring 60 163.001 12 Washer, plain

© V a n G e s t e l B & C 2 0 0 2

100 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Boot and ‘B’ post fittings • TR5/TR250

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 131.530 1 Tubular reinforcement 2 162.670 2 Screw 3 163.081 2 Washer, plain 4 164.012 2 Washer, spring 5 161.019 2 Nut 6 141.101 1 Pair of boot hinges 9 137.569 2 Pin 10 133.496 1 Gasket set; hinges, handles and windscreen frame fixing 12 163.008 2 Washer, plain 13 161.012 2 Nut, nylon 14 163.138 2 Washer 15 133.939 2 Spacer 16 164.012 4 Washer, spring 17 161.019 4 Nut 18 134.204 1 Telescopic stay rod 19 162.918 1 Bolt, stay rod to boot lid 20 163.081 1 Washer, plain 21 163.080 1 Washer, plain 22 164.044 1 Washer, double coil 23 161.061 1 Nut, nyloc 24 162.652 1 Bolt, stay rod to body bracket 25 163.080 1 Washer, plain 26 164.044 1 Washer, double coil 27 141.087 1 Boot handle assembly 29 141.961 1 Escutcheon 31 163.097 1 Washer, plain 32 161.336 1 Nut, nylon

ILL N° PART N° QTY DESCRIPTION APPLICATION 33 133.495 1 Boot lock 34 162.060 2 Screw 35 163.013 2 Washer, plain 36 164.015 2 Washer, spring 37 172.056 2 Nut 38 121.191 1 Boot lid seal 39 133.658 1 Catch plate 40 162.060 2 Screw 41 164.015 2 Washer, spring 42 163.013 2 Washer, plain 43 161.333 1 Wing nut 44 133.677 1 Disc 45 162.546 1 Hook 46 150.423 1 Tool roll strap 47 133.688 1 Plate 48 162.717 2 Screw 49 162.546 1 Hook bolt 50 161.002 1 Nut 51 135.156 1 Plate 52 122.212 3 Pad, rubber/canvas 53 163.001 1 Washer, plain 54 161.012 1 Nut, nyloc 55 141.300 1 RH ‘B’ post finisher 141.301 1 LH ‘B’ post finisher 56 162.718 2 Screw 57 152.095 2 Stud, black 58 172.572 2 Rivet 59 140.159 1 Boot rack

101© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 141.861 1 TR5 Medallion 2 141.336 1 TR250 Medallion 3 172.033 2 Fixing 4 141.337 1 Triumph badge 5 141.338 1 Overdrive’ badge 6 141.675 1 TR5 P.I. badge 7 141.339 1 TR250' badge 8 152.116 A/R Bush 9 172.033 A/R Fixing Alternative 10 141.847 2 2500' badge 11 141.340 2 TR250' badge, rear 12 152.116 4 Bush 13 172.033 4 Fixing 14 085.372 1 Bonnet stripe Instuction sheet 15 140.143 2 Front wing beading 16 140.144 2 Rear wing beading, upper 17 140.145 2 Rear wing beading, lower 19 162.588 2 Screw 20 134.133 1 RH Front wing moulding 134.134 1 LH Front wing moulding 21 172.216 14 Clip, rivet 3/8” 22 134.135 1 RH door moulding 134.136 1 LH door moulding

ILL N° PART N° QTY DESCRIPTION APPLICATION

23 172.216 12 Clip, rivet 3/8” 24 152.116 2 Clip, barrel 25 134.137 2 Sill moulding 134.138 2 Sill moulding Alternative TR6 model 26 172.217 12 Clip, rivet 9/32” 27 140.140 1 Windscreen capping Soft top models 28 140.141 1 Windscreen capping Surrey top models 29 172.572 9 Rivet 30 122.432 2 Blanking plug 31 152.035 2 Stud Surrey top models 32 162.335 2 Screw 33 141.956 2 Door mirror, chrome 34 141.957 2 Stem, mirror 35 141.958 2 Head, mirror 36 141.070 2 Period sports mirror 37 141.011 1 RH wing or LH door mirror, includes seal 38 122.072 A/R Seal, only 141.012 1 LH wing or RH door mirror, includes seal 39 185.705 1 TSOA badge 40 185.095 2 Threshold plate, stainless w/logo Sold each. 41 185.179 1 Threshold plate set, aluminium Pair. 42 165.138 A/R Screw

Medallions, mouldings and mirrors • TR5/TR250

© V a n G e s t e l B & C 2 0 0 2

102 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Bumpers • TR5/TR250

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 140.151 1 Front bumper 2 135.233 1 Front bumper fitting kit 3 140.153 1 RH overrider 4 140.154 1 LH overrider 5 121.008 A/R Strip, one metre 6 162.067 4 Bolt, chrome 7 161.026 4 Nut 8 164.006 4 Washer, spring 9 164.047 4 Washer, plain 10 132.315 1 RH bumper support bracket 11 132.316 1 LH bumper support bracket 12 133.889 6 Packing piece 13 162.042 2 Screw 14 164.006 2 Washer, spring 15 163.088 2 Washer, plain 16 162.477 2 Bolt 17 162.218 2 Bolt 18 163.141 8 Washer, plain 19 164.006 4 Washer, spring 20 161.026 4 Nut 21 162.024 2 Bolt 22 164.006 2 Washer, spring 23 164.047 2 Washer, plain 24 132.317 2 Spring 25 140.155 1 Rear bumper 26 137.570 1 Rear bumper fitting kit 27 140.157 1 LH overrider with lamp holes 140.236 1 LH overrider without lamp holes Germany 28 140.156 1 RH overrider with lamp holes 140.235 1 RH overrider without lamp holes Germany 29 121.008 A/R Strip, one meter 30 162.067 2 Bolt, chrome 31 161.026 2 Nut 32 164.006 2 Washer, spring 33 163.088 2 Washer, plain

ILL N° PART N° QTY DESCRIPTION APPLICATION

34 132.327 1 RH overrider support bracket 132.326 1 LH overrider support bracket 35 132.324 1 RH outrigger bracket 132.325 1 LH outrigger bracket 36 132.328 2 Inner bracket 37 132.329 2 Outer bracket 38 133.889 2 Packing 39 162.674 2 Bolt 40 164.006 2 Washer, spring 41 163.088 2 Washer, plain 42 133.889 2 Packing 43 162.045 2 Bolt 44 164.002 2 Washer, spring 45 163.001 2 Washer, plain 46 162.056 2 Screw 47 163.088 2 Washer, plain 48 164.006 2 Washer, spring 49 161.026 2 Nut 50 162.042 2 Screw 51 164.006 2 Washer, spring 52 163.088 2 Washer, plain 53 162.676 2 Bolt 54 163.088 4 Washer, plain 55 164.006 2 Washer, spring 56 161.026 2 Nut 57 162.690 4 Screw 58 164.006 4 Washer, spring 59 163.005 4 Washer, plain 60 165.719 2 Bolt 61 164.114 2 Washer, spring 62 163.088 2 Washer, plain 63 133.938 2 Spacer 64 164.047 2 Washer, plain 65 161.393 2 Retaining nut

103© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Grommets and blanking plugs • TR5/TR250

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 121.651 1 Complete grommet & plug kit 2 121.652 1 Front grommet & plug kit 3 122.180 1 Vent rod grommet, 1/2" 4 063.064 1 Heater connector gasket 5 122.009 2 Blanking plug, 3/8" 6 122.153 1 Radio aerial grommet, 1" 7 122.193 1 Oil pressure tube grommet, 1" 8 122.153 1 Choke cable & water valve grommet, 1" 9 122.153 3 Speedo & tacho grommet, 1" 10 122.026 1 Blanking plug, 1" 11 122.180 2 Side lamp cable grommet, 1/2" 12 043.137 1 Steering column grommet, 2.3/8" 13 122.198 1 Wiring loom grommet, driver’s side 1.1/2" 14 122.153 1 Wiring loom grommet, pass. side 1" 15 122.180 1 Bonnet release grommet, 1/2" 16 122.197 1 Wiper rack grommet, 1.1/4" 17 122.180 1 Windscreen washer cable grommet, 1/2" 18 122.180 2 Windscreen washer tubing grommet, 1/2" 19 121.653 1 Cockpit grommet & plug kit 20 122.193 2 Handbrake cable grommet, 1" 21 011.400 1 Blanking plug, 2.1/2" 22 122.432 2 Blanking plug, 7/8" 23 122.193 1 Gearbox loom grommet, 1"

ILL N° PART N° QTY DESCRIPTION APPLICATION

24 122.179 2 Blanking plug, floor panel, 3.1/4" 25 122.433 2 Blanking plug, floor panel, 5/8" 26 122.026 2 Blanking plug, floor panel, 1" 27 121.654 1 Rear grommet & plug kit 28 122.193 2 Number plate lamp grommet, 1" 122.180 2 Number plate lamp grommet, 1/2" Germany 29 122.193 2 Reverse lamp grommet, 1" 30 122.026 2 Blanking plug, 1" Germany 31 101.289 1 Fuel filler grommet, 2.3/8" TR5 122.435 1 Fuel filler grommet, 2.3/8" TR250 32 122.436 A/R Blanking plug, 5/16" 33 122.432 1 Blanking plug, cross member 7/8" 34 122.225 2 Sponge seal, petrol tank 35 122.224 1 Blanking plug, fuel drain, 1.3/8" 36 122.026 2 Blanking plug, 1" TR250 37 122.434 3 Blanking plug, 1/4" TR250 38 122.026 1 Blanking plug, 1" 39 122.193 1/2 Fuel pipe grommet, 1" 40 122.026 1 Blanking plug, 1" TR250 41 122.195 1 Fuel pipe grommet, 1" TR5 42 122.420 1 Fuel hose grommet, 1" TR5 43 122.197 1 Fuel hose grommet, 1.1/4" TR5 44 122.021 4 Blanking plug, 1/2"

Floor plug

© V a n G e s t e l B & C 2 0 0 2

104 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Body and front end • TR6

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 130.033 1 RHD bodyshell P.I. to CR1 & 130.031 1 LHD bodyshell Carb. to CF1 130.034 1 RHD bodyshell P.I. CR1 on 130.032 1 LHD bodyshell 130.032 1 LHD bodyshell Carb. CF1 to CF27000 130.035 1 LHD bodyshell Carb. CF27000 on 130.165 1 Transport frame 2 131.366 1 LH inner wing 3 131.367 1 RH inner wing 4 137.575 1 LH nut plate 137.574 1 RH nut plate 5 133.888 9 Wiring loom tag 6 122.153 2 Grommet 7 132.366 1 LH splash plate 132.365 1 RH splash plate 8 121.210 2 Rubber seal 9 172.251 6 Clip 10 162.065 2 Screw 11 162.029 10 Screw 12 163.011 12 Washer, plain 13 164.012 12 Washer, spring 14 133.934 1 Bonnet stay rod bracket 137.534 1 LH body lifting bracket 15 137.533 1 RH body lifting bracket 16 132.378 1 LH stayrod 132.379 1 RH stayrod 17 161.714 2 Nut 18 164.012 2 Washer, spring 19 163.011 2 Washer, plain 20 131.368 1 LH wheel arch 21 131.369 1 RH wheel arch 22 137.531 1 RH upper wheelarch reinforcement 137.532 1 LH upper wheelarch reinforcement 23 136.446 1 RH lower wheelarch reinforcement 136.447 1 LH lower wheelarch reinforcement 24 136.469 1 RH reinforcement bracket 136.470 1 LH reinforcement bracket 25 136.448 1 RH chassis mounting bracket 136.449 1 LH chassis mounting bracket

ILL N° PART N° QTY DESCRIPTION APPLICATION

26 133.888 9 Wiring loom tag 27 131.527 1 Plenum P.I. to CR1 & Carb. to CF1 131.658 1 Plenum P.I. CR1 on & Carb. CF1 on 28 062.272 2 Drain tube 29 062.129 2 Rubber hose 30 133.929 2 Wheel box access plate 31 162.157 8 Screw 32 062.127 2 Hose 33 172.377 2 Clip 34 011.066 2 Grommet 35 131.672 1 RHD bulkhead P.I. to CR1 & 131.659 1 LHD bulkhead Carb. to CF1 136.480 1 RHD bulkhead P.I. CR1 on & 136.479 1 LHD bulkhead Carb. CF1 on 36 136.450 1 LHD front footwell panel, RH 136.452 1 RHD front footwell panel, RH 37 136.451 1 LHD front footwell panel, LH 136.453 1 RHD front footwell panel, LH 38 134.758 1 RHD vertical repair panel 134.754 1 LHD vertical repair panel 39 134.755 1 Vertical repair panel, bulkhead 40 138.123 1 LHD horizontal repair panel, bulkhead 138.124 1 RHD horizontal repair panel, bulkhead 41 137.577 1 LHD reinforcement, steering column P.I. CR1 on & 137.578 1 RHD reinforcement, steering column Carb. CF1 on 42 137.482 1 LHD steering column strap bracket 137.535 1 RHD steering column strap bracket 43 137.579 1 Wiper motor bracket 44 137.538 1 LH battery stay bracket 45 137.537 1 RH battery stay bracket 46 137.539 1 Bulkhead pocket 47 137.540 1 Bulkhead pocket gusset 48 137.541 1 LH dash gusset 49 161.456 A/R Nut, square 50 161.457 A/R Retainer 51 133.888 A/R Wiring loom tag 52 132.382 1 LH bulkhead end panel 53 137.542 1 Bonnet release bracket 54 132.383 1 RH bulkhead end panel

105© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Rear, floor and inner panels • TR6

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 131.380 1 LH floor panel 131.381 1 RH floor panel 2 122.179 2 Rubber plug 3 122.433 2 Grommet, 5/8" 4 122.026 2 Grommet, 1" 5 132.392 1 Propshaft tunnel 6 137.588 1 Fulcrum bracket 7 132.574 1 Tunnel cover 8 131.378 1 LH outer sill panel 131.379 1 RH outer sill panel 9 133.569 1 LH sill end filler, front 133.570 1 RH sill end filler, front 10 133.571 1 LH sill end filler, rear 133.572 1 RH sill end filler, rear 11 131.376 1 LH inner sill 131.377 1 RH inner sill 12 133.888 A/R Wiring loom tag 13 132.386 1 LH outer ‘A’ post 132.387 1 RH outer ‘A’ post 14 133.953 2 Spring guide 15 172.382 4 Rivet 16 132.384 1 LH inner ‘A’ post 132.385 1 RH inner ‘A’ post 17 132.388 1 LH ‘B’ post assembly Front & rear face 132.389 1 RH ‘B’ post assembly Front & rear face 18 136.482 1 LH ‘B’ post, front face 136.481 1 RH ‘B’ post, front face 19 132.390 1 LH ‘B’ post, rear face 132.391 1 RH ‘B’ post, rear face 20 137.558 2 Tapped plate 21 137.560 1 LH retainer 137.559 1 RH retainer 22 137.562 1 LH ‘B’ post gusset reinforcement 137.561 1 RH ‘B’ post gusset reinforcement 23 133.575 2 Front sill mounting 24 133.576 1 LH sill mounting bracket, rear 133.577 1 RH sill mounting bracket, rear

ILL N° PART N° QTY DESCRIPTION APPLICATION

27 131.385 1 RH inner rear wing 28 131.384 1 LH inner rear wing 29 133.888 6 Wiring loom tag 30 086.779 2 Blade, earth 31 137.582 1 Boot lid stay bracket 32 131.387 1 RH wheel arch assembly 33 131.386 1 LH wheel arch assembly 37 137.583 1 RH seat belt anchor 137.584 1 LH seat belt anchor 38 131.382 1 Heelboard 39 138.125 1 Rear pan assembly 40 131.383 1 Seat pan panel 41 136.458 1 Differential cover 42 137.550 2 Seat pan bracket 43 137.551 1 Tunnel cover support bracket 44 133.944 1 RH squab support bracket 45 133.945 1 LH squab support bracket 46 137.552 2 Nut plate 48 137.554 1 LH arch/floor gusset 137.553 1 RH arch/floor gusset 49 133.958 1 RH fuel tank support bracket 50 133.959 1 LH fuel tank support bracket 52 131.388 1 Spare wheel pan 54 137.556 1 Metal plate 55 152.205 2 Rivet 56 162.546 1 Hook bolt 57 161.002 1 Nut 58 135.156 1 Reinforcing plate 59 122.212 3 Pad, rubber/canvas 60 163.001 1 Washer, plain 61 161.012 1 Nut, nyloc 62 132.394 1 RH boot side floor 63 132.393 1 LH boot side floor 64 133.578 2 Boot floor mounting bracket 66 131.392 1 Reinforcement, rear valance, upper 67 131.391 1 Inner valance, lower

© V a n G e s t e l B & C 2 0 0 2

106 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 131.370 1 Bonnet 2 131.362 1 Front valance, up to 1973 P.I. to CR1 & Carb. to CF1 131.363 1 Front valance, 1973-’74 P.I. CR1 on & Carb. CF1 to CF27000 131.364 1 Front valance, 1975 on Carb. CF27000 on 3 133.888 A/R Wiring loom tag 4 137.571 3 Retainer 5 086.779 2 Blade, earth 6 131.356 1 RH front wing Europe to 1975, USA to 1972 131.357 1 LH front wing Europe to 1975, USA to 1972 131.358 1 RH front wing USA 1972-’76 131.359 1 LH front wing USA 1972-’76 7 137.572 1 RH headlamp nacelle 137.573 1 LH headlamp nacelle 9 136.444 1 RH splash plate 136.445 1 LH splash plate 10 136.463 1 RH front wing repair 136.464 1 LH front wing repair 11 133.565 2 Front wing fitting kit 12 162.452 28 Bolt, Acme 13 163.011 12 Washer, plain 14 163.298 22 Washer, everseal 15 161.319 22 Nut, spire 16 163.301 16 Washer, ‘D’ shaped 17 163.081 6 Washer, plain 18 161.718 6 Nut, spire 19 162.454 6 Screw 20 164.012 6 Washer, spring 21 131.373 1 RH door Up to 1974 131.372 1 LH door Up to 1974 138.126 1 RH door, with cut-out for door pull pocket From 1974 on 138.127 1 LH door, with cut-out for door pull pocket From 1974 on

Outer panels • TR6

ILL N° PART N° QTY DESCRIPTION APPLICATION

22 131.374 1 LH door skin 131.375 1 RH door skin 23 131.371 1 Scuttle P.I. to CR1 & Carb. to CF1 138.130 1 Scuttle P.I. CR1 on & Carb. CF1 on 24 138.145 1 Rear deck 25 131.389 1 Rear deck centre 26 136.454 1 Deck support frame 28 133.580 1 RH rear deck forward section 29 133.579 1 LH rear deck forward section 30 133.948 1 RH ‘B’ post gusset 133.949 1 LH ‘B’ post gusset 34 161.458 5 Rivnut 35 131.390 1 Boot lid 36 131.393 1 Rear valance, 1969-’73 P.I. to CR1 & Carb. to CF1 131.394 1 Rear valance, 1973-’76, with two P.I. CR1 on & Carb. CF1 on square holes for number plate lamps 37 131.360 1 RH rear wing 38 131.361 1 LH rear wing 39 136.456 1 RH baffle, rear 136.457 1 LH baffle, rear 40 133.566 2 Rear wing fitting kit 41 162.454 6 Screw 42 164.012 6 Washer, spring 43 161.736 8 Nut, spire 44 162.452 38 Screw, Acme 45 163.011 44 Washer, plain 46 168.247 44 Washer, fibre 47 161.319 30 Nut, spire

107© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Bonnet fittings and grille • TR6

ILL N° PART N° QTY DESCRIPTION APPLICATION 1 140.430 1 Grille assembly, black surround P.I. to CR1 & Carb. to CF1 up to 1972 2 140.208 1 Grille assembly, bright surround P.I. CR1 on & Carb. CF1 on 1972 on 3 134.156 1 Grille surround, upper 4 134.157 1 Grille surround, lower 5 172.372 10 Rivet 6 161.024 8 Nut 7 164.015 8 Washer, spring 8 163.013 8 Washer, plain 9 134.151 1 Grille finisher, lower 11 141.396 1 TR6 badge, enamel 12 141.962 1 Badge, plinth 13 168.248 2 Washer, rubber 14 164.116 2 Washer, spring 15 161.369 2 Nut 16 141.397 1 Grille badge & plinth assembly Will fit all years 17 085.257 1 TR6 badge, foil 18 141.963 1 Badge, plinth 19 165.721 1 Screw 20 164.116 1 Washer, spring 21 163.012 1 Washer, plain 22 131.365 1 Spoiler 23 162.140 5 Screw P.I. CR1 on & Carb. CF1 on 24 163.106 10 Washer, plain 25 161.737 5 Nut, nyloc 26 133.600 1 Safety catch assembly 27 137.563 1 Bracket 29 137.565 1 Bracket 30 152.206 1 Rivet 31 171.099 1 Return spring 32 163.299 1 Washer, plain 33 137.566 1 Pin 34 137.567 1 Cup 35 171.100 1 Spring 36 161.735 1 Nut 37 162.029 1 Screw 38 164.012 2 Washer, spring 39 164.046 2 Washer, plain 40 133.933 2 Catch plate assembly 41 162.051 1 Screw 42 163.013 1 Washer, plain 43 161.024 1 Nut 46 162.454 4 Screw

ILL N° PART N° QTY DESCRIPTION APPLICATION 47 164.012 4 Washer, spring 48 163.081 4 Washer, plain 49 134.759 1 Bonnet cable 50 133.837 1 Inner bonnet cable 51 133.838 1 Outer bonnet cable 52 122.180 1 Grommet 53 172.301 1 Clip 54 172.056 1 Trunnion 55 162.135 1 Screw 56 172.289 2 LHD clip 57 135.257 2 RHD clip 58 162.061 2 Screw 59 134.217 1 Bonnet prop rod 60 133.934 1 Bonnet prop rod bracket 61 122.194 1 Rubber buffer 62 162.730 1 Screw 63 161.061 1 Nut, nyloc 64 164.043 1 Washer, thackery 65 163.011 1 Washer, plain 66 121.214 1 Bonnet seal, rear 67 121.213 1 Bonnet seal, front 68 133.180 2 Bonnet locating pin 69 161.008 4 Nut 70 163.103 4 Washer, plain 71 122.177 4 Rubber buffer 72 162.504 8 Screw 73 163.052 8 Washer, cup 74 122.437 1 Pad, thermostat housing 75 133.850 1 RH bonnet hinge 76 133.851 1 LH bonnet hinge 77 137.589 1 Bonnet hinge fitting kit, without hinges 78 162.525 6 Screw 79 162.033 2 Screw 80 164.002 8 Washer, spring 81 163.001 8 Washer, plain 82 162.686 2 Screw 83 162.020 2 Screw 84 164.002 4 Washer, spring 85 163.008 4 Washer, plain 86 161.002 2 Nut 87 134.760 1 Grille moulding, centre 88 121.659 1 Bonnet edge moulding, rear 89 121.660 2 Bonnet edge moulding, side 90 121.661 2 Boot edge moulding, rear

1973-’76

1969-’73

© V a n G e s t e l B & C 2 0 0 2

108 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Boot fittings, vent grille and air duct • TR6

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 121.069 1 Boot lid seal 2 135.263 1 RH boot hinge 135.264 1 LH boot hinge 3 137.590 1 Boot hinge fitting kit, without hinges 4 162.525 6 Screw 5 164.002 6 Washer, spring 6 163.001 6 Washer, plain 7 162.022 4 Screw 8 164.002 4 Washer, spring 9 163.008 4 Washer, plain 10 134.204 1 Boot lid stay 11 162.652 2 Bolt 12 163.080 2 Washer, plain 13 163.081 2 Washer, plain 14 164.044 2 Washer, thackery 15 135.265 1 Boot lock 16 137.361 1 Push button assembly 17 141.433 1 Barrel & key 18 152.207 1 Pin 19 162.824 2 Screw 20 164.023 2 Washer, spring 21 152.208 2 Rivet 22 162.825 4 Screw 23 164.015 4 Washer, spring 24 168.246 4 Washer, plain 25 133.875 1 Lock striker 26 162.826 2 Screw 27 164.015 2 Washer, spring 28 168.246 2 Washer, plain 29 161.333 1 Wing nut 30 133.677 1 Disc 31 162.546 1 Hook 32 162.546 1 Hook bolt 33 161.002 1 Nut 34 135.156 1 Reinforcing plate 35 122.212 3 PAD, rubber/canvas 36 163.001 1 Washer, plain 37 161.012 1 Nut, nyloc 38 150.423 1 Tool roll strap

ILL N° PART N° QTY DESCRIPTION APPLICATION

39 133.688 1 Tool roll plate 40 162.717 2 Screw 41 133.563 1 Vent lid & hinge assembly P.I. to CR1 & Carb. to CF1 43 133.564 1 Vent lid operating rod 44 172.469 1 Fixing 45 122.180 1 Grommet 46 172.056 1 Trunnion 47 162.135 1 Screw 48 133.928 1 Spring 49 162.822 3 Screw 50 164.015 3 Washer, spring 51 121.190 1 Vent lid seal 52 133.568 1 Vent grille, plastic P.I. CR1 on & 53 165.379 2 Screw Carb. CF1 on 54 172.168 2 Nut, spire 55 122.009 A/R Plug 56 137.299 1 Gauze 57 132.381 1 Radiator air duct P.I. 132.380 1 Radiator air duct Carb. 58 137.470 1 Air duct fitting kit P.I. 137.471 1 Air duct fitting kit Carb. 59 162.702 2 Screw 60 163.106 2 Washer, plain 61 161.387 2 Nut, spire 62 162.454 1/2 Screw 63 164.012 1/2 Washer, spring 64 163.081 1/2 Washer, plain 65 161.269 1/2 Nut, spire 66 161.714 1 Nut P.I. 67 164.012 1 Washer, spring 68 163.081 1 Washer, plain 69 105.087 1 Strap assembly 70 132.379 1 RH stayrod 132.378 1 LH stayrod 71 161.714 2 Nut 72 164.012 2 Washer, spring 73 163.081 2 Washer, plain 74 140.209 1 Boot rack Polished stainless steel

109© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Badges, medallions, mouldings and mirrors

ILL N° PART N° QTY DESCRIPTION APPLICATION

2 141.396 1 TR6 badge, enamel 1969-’72 3 141.962 1 Badge, plinth 4 168.248 2 Washer, rubber 5 164.116 2 Washer, spring 6 161.369 2 Nut 7 141.397 1 Grille badge & plinth assembly P.I. CR1 on & Carb. CF1 on 8 085.257 1 TR6 badge, foil 1972 on 9 141.963 1 Badge, plinth 10 165.721 1 Screw 11 164.116 1 Washer, spring 12 163.012 1 Washer, plain 13 085.127 2 British Leyland’ badge P.I. CP75001 on & Carb. CC75001 on 14 085.175 2 Rear wing decal, TR6, red 085.177 2 Rear wing decal, TR6, white 085.176 2 Rear wing decal, TR6, black 15 085.134 1 RH rear wing decal, union jack Carb. CF1 on 085.135 1 LH rear wing decal, union jack 16 141.964 1 Triumph’ nameplate, cloisonne 1969-’70 17 141.357 1 Triumph’ nameplate, base 1971-’76 18 141.604 1 Triumph’ sticker 1971-’76 19 152.116 2 Fix 20 141.965 1 Overdrive badge, black 141.338 1 Overdrive badge, cream Alternative 21 141.566 1 Injection badge P.I. without overdrive 22 141.568 1 Rear number plate plinth Carb. CF27001 on 23 141.567 1 Triumph’ nameplate 24 162.576 3 Screw 25 164.002 3 Washer, spring 26 141.386 4 Centre cap with sticker P.I. CP50001 on & 27 085.146 4 TR6 decal Carb. CC50001 on 28 141.300 1 RH ‘B’ post finisher 29 141.301 1 LH ‘B’ post finisher 30 162.718 2 Screw 31 152.095 2 Stud, black

ILL N° PART N° QTY DESCRIPTION APPLICATION

32 172.572 2 Rivet 33 134.138 2 Sill moulding, 8mm, 1969-’73 P.I. to CR1 & Carb. to CF1 134.174 2 Sill moulding, 16mm, 1973-’76 P.I. CR1 on & Carb. CF1 on 34 172.217 14 Rivet, 8mm, 1969-’73 P.I. to CR1 & Carb. to CF1 172.216 14 Rivet, 16mm, 1973-’76 P.I. CR1 on & Carb. CF1 on 35 134.132 2 Wing bead P.I. CP50001 on & 36 137.529 12 Tag Carb. CC50001 on 37 085.387 1 Stripe kit, black 085.388 1 Stripe kit, gold 085.389 1 Stripe kit, silver 085.390 1 Stripe kit, red 085.391 1 Stripe kit, white 38 085.392 1 Stripe kit, black USA market 085.393 1 Stripe kit, gold USA market 085.394 1 Stripe kit, silver USA market 085.395 1 Stripe kit, red USA market 39 140.142 1 Windscreen capping 40 172.572 9 Rivet 41 122.432 2 Plug 42 141.956 2 Door mirror 43 141.957 2 Stem 44 141.958 2 Mirror head See also page 165 45 141.113 1 LH door mirror, chrome See also page 164 141.112 1 RH door mirror, chrome See also page 164 141.115 1 LH door mirror, black See also page 164 141.114 1 RH door mirror, black See also page 164 46 133.302 A/R Wedge plate 47 133.303 A/R Gasket, plinth 48 165.525 A/R Screw 49 141.070 A/R Period sports mirror 50 185.180 2 Threshold plate, stainless ‘TR6’ logo 51 185.095 2 Threshold plate, stainless with ‘TR’ logo 52 185.179 2 Threshold plate, aluminium 53 165.138 A/R Screw

1969-’72 1972-’76

© V a n G e s t e l B & C 2 0 0 2

110 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Front bumpers • TR6 part one

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 140.171 1 Front bumper P.I. to CR1 & Carb. to CF1 2 132.594 1 LH bumper mounting bracket 132.595 1 RH bumper mounting bracket 3 137.592 1 Front bumper fitting kit 4 162.218 2 Bolt, 2 3/4" 5 162.477 2 Bolt, 3" 6 163.141 6 Washer, plain 7 164.006 6 Washer, spring 8 161.026 4 Nut 9 165.722 2 Bolt 10 168.157 2 Washer, rubber 11 165.551 2 Bolt 12 164.002 2 Washer, spring 13 163.001 2 Washer, plain 14 122.276 2 Washer, rubber 15 140.171 1 Front bumper P.I. CR1 on & 16 132.597 1 RH bumper mounting bracket Carb. CF1 to CF12500 132.596 1 LH bumper mounting bracket 17 134.353 2 Tube, bumper support 18 137.593 1 Front bumper fitting kit 19 162.218 2 Bolt, 2 3/4" 20 162.477 2 Bolt, 3" 21 163.141 4 Washer, plain 22 164.006 4 Washer, spring 23 161.026 4 Nut 24 135.251 2 Spacer plate 25 162.065 4 Screw 26 164.012 2 Washer, spring 27 162.211 2 Screw 28 163.088 4 Washer, plain 29 164.021 2 Washer, spring 30 161.026 2 Nut 31 165.722 2 Bolt

ILL N° PART N° QTY DESCRIPTION APPLICATION

32 168.157 2 Washer, rubber 33 164.012 2 Washer, spring 34 163.011 2 Washer, plain 35 168.157 2 Washer, rubber 36 137.594 1 Bumper mounting stud kit Alternative 37 167.166 2 Stud 38 163.141 2 Washer, plain 39 164.006 2 Washer, spring 40 161.026 2 Nut 41 137.598 1 Number plate mounting kit P.I. & Carb. to CF27000 42 133.567 2 Number plate bracket 43 162.454 2 Screw 44 163.011 2 Washer, plain 45 164.012 2 Washer, spring 46 161.019 2 Nut 47 140.176 1 Front number plate plinth Carb. CF27001 on 48 121.008 2 Rubber moulding 49 162.690 2 Screw 50 164.117 2 Washer, spring 51 134.355 2 Strut 52 162.022 2 Screw 53 163.139 2 Washer, plain 54 163.001 2 Washer, plain 55 164.002 2 Washer, spring 56 161.002 2 Nut 57 135.249 2 Strut mounting bracket 58 162.005 4 Screw 59 164.002 4 Washer, spring 60 163.001 4 Washer, plain 61 162.020 2 Screw 62 164.002 4 Washer, spring 63 163.001 2 Washer, plain

RH

RH

LH

LH

Front Europe 1969-’76USA 1969-’73

Europe 1969-’73USA 1969-’73

Europe 1973 on USA 1973 only

111© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Front bumpers • TR6 part two

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 140.172 1 Front bumper Carb. CF12501 to CF27000 2 132.597 1 RH bumper mounting bracket 132.596 1 LH bumper mounting bracket 3 134.353 2 Bumper support tube 4 137.595 1 Front bumper fitting kit 5 162.218 2 Bolt, 2 3/4" 6 162.477 2 Bolt, 3" 7 163.141 6 Washer, plain 8 164.006 6 Washer, spring 9 161.026 8 Nut 10 135.251 2 Spacer plate 11 162.147 4 Screw 12 164.012 4 Washer, spring 13 162.211 2 Screw 14 163.088 4 Washer, plain 15 167.166 2 Stud 16 164.006 2 Washer, spring 17 162.670 2 Bolt 18 164.012 2 Washer, spring 19 163.011 2 Washer, plain 20 122.209 2 Washer, rubber 21 140.175 1 LH over rider 140.174 1 RH over rider 22 135.252 1 LH angle bracket, upper 135.253 1 RH angle bracket, upper 23 135.254 1 LH angle bracket, lower 135.255 1 RH angle bracket, lower 24 135.256 2 Reinforcement plate 25 137.596 1 Front over rider fitting kit 26 162.129 4 Bolt 27 164.002 4 Washer, spring 28 161.002 4 Nut 29 162.029 8 Screw 30 164.012 8 Washer, spring 31 140.173 1 Front bumper Carb. CF27001 on 32 132.597 1 RH bumper mounting bracket 132.596 1 LH bumper mounting bracket 33 134.353 2 Bumper support tube Carb. CF27001 to CF35000 134.357 2 Bumper support tube Carb. CF35001 on

ILL N° PART N° QTY DESCRIPTION APPLICATION

34 134.354 2 Reinforcement strut Carb. CF27001 to CF35000 134.356 2 Reinforcement strut Carb. CF35001 on 35 137.597 1 Front bumper fitting kit 36 162.218 2 Bolt, 2 3/4" 37 162.477 2 Bolt, 3" 38 163.141 6 Washer, plain 39 164.006 8 Washer, spring 40 161.026 10 Nut 41 135.251 2 Spacer plate 42 162.147 4 Screw 43 164.012 4 Washer, spring 44 162.691 2 Screw 45 163.088 8 Washer, plain 46 162.479 2 Screw 47 162.066 2 Bolt 48 164.006 2 Washer, spring 49 162.670 2 Bolt 50 164.012 2 Washer, spring 51 163.011 2 Washer, plain 52 168.157 2 Washer, rubber 53 140.175 1 LH over rider 140.174 1 RH over rider 54 135.252 1 LH angle bracket, upper 135.253 1 RH angle bracket, upper 55 135.254 1 LH angle bracket, lower 135.255 1 RH angle bracket, lower 56 135.256 2 Reinforcement plate 57 137.596 1 Front over rider fitting kit 58 162.129 4 Bolt 59 164.002 4 Washer, spring 60 161.002 4 Nut 61 162.029 8 Screw 62 164.012 8 Washer, spring 63 133.739 1 RH indicator lamp bracket 133.740 1 LH indicator lamp bracket 64 162.060 4 Screw 65 163.013 4 Washer, plain 66 164.015 4 Washer, spring 67 161.024 4 Nut

RH RH

LH LH

Front USA 1973 on

USA 1974 USA 1975 on1975 onIndicator lamp

© V a n G e s t e l B & C 2 0 0 2

112 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Rear bumpers

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 140.177 1 Rear bumper, centre P.I. to CR5000 & Carb. to CF12500 2 140.179 1 RH rear bumper corner 140.181 1 LH rear bumper corner 3 133.679 2 Joint plate 4 133.678 2 Joint washer 5 132.790 1 RH outrigger 132.791 1 LH outrigger 6 132.475 1 LH bumper mounting bracket 132.474 1 RH bumper mounting bracket 7 187.948 1 Rear bumper fitting kit 8 161.002 6 Nut 9 164.002 6 Washer, spring 10 163.008 6 Washer, plain 11 162.676 2 Bolt, 3 1/4" 12 163.088 8 Washer, plain 13 164.006 4 Washer, spring 14 161.026 2 Nut 15 162.042 2 Bolt, 1 1/4" 16 162.072 2 Bolt 17 164.006 6 Washer, spring 18 168.157 2 Washer, rubber 19 162.690 4 Screw 20 163.005 4 Washer, plain 21 162.056 2 Screw, 3/8" 162.005 2 Screw, 5/16" 22 164.006 2 Washer, spring, 3/8" 164.002 2 Washer, spring, 5/16" 23 163.088 2 Washer, plain, 3/8" 163.001 2 Washer, plain, 5/16" 24 168.157 2 Washer, rubber, 3/8" 122.276 2 Washer, rubber, 5/16"

ILL N° PART N° QTY DESCRIPTION APPLICATION

25 140.178 1 Rear bumper, centre P.I. CR5001 on 26 140.179 1 RH rear bumper corner 140.181 1 LH rear bumper corner 27 133.679 2 Joint plate 28 133.678 2 Joint washer 29 132.790 1 RH outrigger 132.791 1 LH outrigger 30 132.793 1 LH bumper mounting bracket 132.792 1 RH bumper mounting bracket 31 137.600 1 Rear bumper fitting kit 32 161.002 6 Nut 33 164.002 6 Washer, spring 34 163.008 6 Washer, plain 35 162.113 2 Bolt, 4" 36 163.088 10 Washer, plain 37 135.266 2 Spacer, serrated 38 164.006 8 Washer, spring 39 161.026 2 Nut 40 162.066 2 Bolt, 1 1/2" 41 135.267 2 Spacer, round 42 162.042 2 Bolt 43 164.006 6 Washer, spring 44 168.157 4 Washer, rubber 45 162.690 4 Screw 46 163.005 4 Washer, plain 47 162.056 2 Screw 48 137.601 1 Bumper mounting stud kit Alternative, easy fit 49 167.166 2 Stud 50 163.141 2 Washer, plain 51 164.006 2 Washer, spring 52 161.026 2 Nut

LH

LH

RH

RH

Europe 1973-’76USA 1973

Rear

Number platelamp

Europe 1969-’73USA 1969-’73

113© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

USA 1974-’76 rear bumpers • TR6

ILL N° PART N° QTY DESCRIPTION APPLICATION

USA 1974 1 140.183 1 Rear bumper, centre Carb. CF12501 to CF27000 2 140.179 1 RH rear bumper corner 140.181 1 LH rear bumper corner 3 133.679 2 Joint plate 4 137.602 1 RH joint washer 137.603 1 LH joint washer 5 132.790 1 RH outrigger 132.791 1 LH outrigger 6 132.793 1 LH bumper mounting bracket 132.792 1 RH bumper mounting bracket 7 137.604 1 Rear bumper fitting kit 8 161.002 6 Nut 9 164.002 6 Washer, spring 10 163.008 6 Washer, plain 11 162.113 2 Bolt 12 163.088 10 Washer, plain 13 135.266 2 Spacer, serrated 14 164.006 8 Washer, spring 15 161.026 4 Nut 16 135.267 2 Spacer, round 17 162.066 2 Bolt 18 167.351 2 Stud 19 162.690 4 Screw 20 164.006 4 Washer, spring 21 163.005 4 Washer, plain 22 162.056 2 Screw 23 168.157 2 Washer, rubber 24 140.185 1 RH overrider 140.186 1 LH overrider 25 135.268 1 RH overrider support 135.269 1 LH overrider support 26 132.794 1 RH overrider support stay 132.795 1 LH overrider support stay 27 137.605 1 Overrider fitting kit 28 162.065 8 Screw 29 164.012 8 Washer, spring 30 163.081 8 Washer, plain 31 162.483 2 Screw 32 164.002 2 Washer, spring 33 163.008 2 Washer, plain

ILL N° PART N° QTY DESCRIPTION APPLICATION

USA 1975-’76 34 140.184 1 Rear bumper, centre Carb. CF27001 on 35 140.180 1 RH rear bumper corner 140.182 1 LH rear bumper corner 36 133.679 2 Joint plate 37 137.602 1 RH joint washer 137.603 1 LH joint washer 38 132.790 1 RH outrigger 132.791 1 LH outrigger 39 132.792 1 RH bumper mounting bracket 132.793 1 LH bumper mounting bracket 40 137.606 1 Rear bumper fitting kit 41 161.002 6 Nut 42 164.002 6 Washer, spring 43 163.008 6 Washer, plain 44 162.113 2 Bolt 45 163.088 10 Washer, plain 46 135.266 2 Spacer, serrated 47 164.006 6 Washer, spring 48 161.026 4 Nut 49 135.267 2 Spacer, round 50 162.066 2 Bolt 51 167.167 2 Stud 52 164.006 6 Washer, spring 53 162.690 4 Screw 54 163.005 4 Washer, plain 55 162.056 2 Screw 56 168.157 2 Washer, rubber 57 140.185 1 RH overrider 140.186 1 LH overrider 58 135.268 1 RH overrider support 135.269 1 LH overrider support 59 132.796 1 RH overrider support stay 132.797 1 LH overrider support stay 60 137.605 1 Overrider fitting kit 61 162.065 8 Screw 62 164.012 8 Washer, spring 63 163.081 8 Washer, plain 64 162.483 2 Screw 65 164.002 2 Washer, spring 66 163.008 2 Washer, plain 67 141.568 1 Number plate plinth 68 141.567 1 ‘Triumph’ sticker 69 162.576 3 Screw 70 164.002 3 Washer, spring

USA 1974

USA 1975 on

© V a n G e s t e l B & C 2 0 0 2

114 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Door, lock and draught excluder

ILL N° PART N° QTY DESCRIPTION APPLICATION

5 141.093 1 Pair door locks Original type 6 122.182 2 Gasket, door lock 7 172.206 2 Clip 8 141.347 1 Pair door locks, heavy duty Needs some adjustment 9 141.967 1 Pair door locks, security type 10 141.968 1 Lock fitting kit, improves OE locks Replaces the clips 11 141.055 2 Door handle 12 133.069 2 Gasket set 14 162.822 2 Screw 15 164.015 2 Washer, spring 16 163.013 2 Washer, plain 17 162.051 2 Screw 18 164.015 2 Washer, spring 19 163.013 2 Washer, plain 21 150.836 2 Pad, sound deadening 66 X 15cm 22 133.587 4 Hinge assembly 23 133.714 4 Pin 24 162.045 12 Screw, hinge to door 25 164.002 12 Washer, spring 26 137.608 A/R Shim 27 162.005 12 Screw, hinge to A post 28 164.002 12 Washer, spring 29 163.089 12 Washer, plain 30 133.847 A/R Shim 31 133.583 2 Check strap 33 172.189 2 Clevis pin kit 36 133.953 2 Spring guide 37 172.382 4 Rivet 38 122.181 2 Gaiter, rubber

ILL N° PART N° QTY DESCRIPTION APPLICATION

39 162.061 4 Screw 40 163.113 4 Washer, plain 41 132.658 1 RH remote control 132.659 1 LH remote control 42 162.051 6 Screw 43 164.015 6 Washer, spring 44 163.013 6 Washer, plain 45 164.051 2 Washer, waved 46 163.097 2 Washer, plain 47 172.313 2 Clip 49 141.302 2 Interior door handle 50 141.966 2 Escutcheon 1967-’72 141.303 2 Escutcheon 1973 on 51 171.022 2 Spring 52 172.215 2 Pin 53 133.653 1 RH rotary lock 133.654 1 LH rotary lock 54 162.935 6 Screw, single slotted 1967-’72 162.594 6 Screw, cross slotted 1972 on 55 133.387 1 RH striker plate 133.388 1 LH striker plate 56 135.355 A/R Shim 57 162.457 2 Screw, single slotted, upper 1967-’72 162.595 2 Screw, cross slotted, upper 1972 on 58 162.016 4 Screw, single slotted, lower 1967-’72 162.823 4 Screw, cross slotted, lower 1972 on 59 121.064 2 Upper ‘A’ post seal, thick 121.065 2 Upper ‘A’ post seal, thin 60 150.038 1 Black draught excluder, rubber with felt for two sides

115© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Door glass and wind-up mechanism

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 121.181 1 LH outer strip 121.180 1 RH outer strip 2 172.164 14 Clip 3 121.183 1 LH inner strip 121.182 1 RH inner strip 4 172.088 14 Clip 5 132.395 1 LH window regulator 132.396 1 RH window regulator 6 162.076 14 Screw 7 164.012 14 Washer, spring 8 163.081 14 Washer, plain 9 141.076 2 Window handle 12 141.966 2 Escutcheon 13 171.022 2 Spring 14 172.215 2 Pin 15 135.226 2 Washer, sponge 17 120.058 2 Door glass 120.111 2 Door glass, tinted 18 134.223 1 LH channel 134.222 1 RH channel 19 121.284 2 Rubber strip 20 134.177 1 LH front channel 134.178 1 RH front channel 21 121.221 A/R Channel only, less brackets. Use your existing brackets to complete this channel

ILL N° PART N° QTY DESCRIPTION APPLICATION

22 162.076 2 Screw 23 162.029 4 Screw 24 164.007 6 Washer, shakeproof 25 163.011 6 Washer, plain 26 163.070 A/R Washer, plain 27 134.179 1 LH rear channel 134.180 1 RH rear channel 28 121.221 A/R Channel only, less brackets. Use your existing brackets to complete this channel 29 162.029 6 Screw 30 164.007 6 Washer, shakeproof 31 163.011 6 Washer, plain 32 163.070 A/R Washer, plain 33 133.852 1 LH tie rod 133.853 1 RH tie rod 34 137.610 1 LH Bracket, glass stop, upper 137.609 1 RH Bracket, glass stop, upper 35 162.822 4 Screw 36 164.015 14 Washer, spring 37 163.013 4 Washer, plain 38 133.855 2 Bracket, glass stop 39 133.113 2 Pad, felt 40 162.051 4 Screw 41 164.015 4 Washer, spring 42 163.013 4 Washer, plain

© V a n G e s t e l B & C 2 0 0 2

116 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 138.150 1 Frame, 1967-’68 P.I. to CP2066 & Carb. to CD4488 131.289 1 Frame, 1968-’76 P.I. CP2066 on & Carb. CD4488 on 2 152.210 1 LH catch plate, 1967-’68 P.I. to CP2066 & 3 152.209 1 RH catch plate, 1967-’68 Carb. to CD4488 141.569 1 LH catch plate, 1968-’76 P.I. CP2066 on & 141.570 1 RH catch plate, 1968-’76 Carb. CD4488 on 4 165.723 4 Screw 5 172.384 2 Bracket, Surrey soft top TR5 & TR250 6 120.037 1 Windscreen glass, clear 120.053 1 Windscreen glass, tinted 120.039 1 Windscreen glass, top part is tinted 7 121.133 1 Glazing rubber 8 121.134 1 Finishing strip 9 133.392 1 Clip, finishing joint 10 121.135 1 Seal, screen frame to body 11 150.396 1 Finishing kit, 4 pieces black moulded plastic with a leather imitation as original 14 140.140 1 Windscreen capping TR5 & TR250 soft top 15 140.141 1 Windscreen capping TR5 & TR250 surrey top 16 152.035 2 Stud 17 162.335 2 Screw, self tapping 18 140.142 1 Windscreen capping TR6 19 172.572 9 Rivet 20 122.241 2 Blanking plug

ILL N° PART N° QTY DESCRIPTION APPLICATION

21 121.192 1 Seal, header rail to screen Soft top models only 22 121.333 1 Seal, header rail to screen Hard top models only 23 121.064 2 Upper ‘A’ post seal, thick Alternatives; fit in pairs. 121.065 2 Upper ‘A’ post seal, thin 24 141.333 3 Catch plate, chrome Early TR5 & TR250 135.270 3 Catch plate, black TR5;TR250 & TR6 25 162.426 3 Dome headed screw, chrome 162.442 3 Dome headed screw, black 26 163.139 3 Washer, plain, chrome 163.302 3 Washer, plain, black 28 133.494 1 LH bracket, frame mounting 133.493 1 RH bracket, frame mounting 29 133.492 2 Packing 30 162.065 2 Screw 31 164.012 2 Washer, spring 32 163.011 2 Washer, plain 33 162.029 4 Screw 34 164.012 4 Washer, spring 35 163.070 2 Washer, plain 36 163.010 2 Washer, plain 37 161.330 2 Nut, nyloc 38 163.103 A/R Washer, plain 39 161.269 2 Retaining nut

Windscreen

For Surrey soft top only

For Hard top only

117© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Sun visors and interior mirrors

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 159.387 1 LHD sun visor kit, white TR250 150.920 1 LHD sun visor kit, black TR6 159.389 1 RHD sun visor kit, black TR6 2 159.391 1 LHD sun visor, LH, white TR250 150.917 1 LHD sun visor, LH, black 150.919 1 RHD sun visor, LH, black 3 159.392 1 LHD sun visor, RH, white TR250 150.918 1 LHD sun visor, RH, black 150.917 1 RHD sun visor, RH, black 4 137.613 1 Sun visor mounting kit 5 133.480 2 Inner mounting bar 6 133.743 1 LH outer mounting bar 7 133.744 1 RH outer mounting bar 8 133.482 1 LH bracket 9 133.481 1 RH bracket

ILL N° PART N° QTY DESCRIPTION APPLICATION

10 162.076 2 Screw 11 163.010 2 Washer, plain 12 163.081 2 Washer, plain 13 122.075 2 Sun visor retainer 14 162.297 4 Screw 15 163.113 4 Washer, plain 16 162.473 2 Screw 17 161.455 2 Nut, spire 18 162.814 4 Screw 19 161.316 4 Fix nut 20 165.725 2 Bolt, mounting bar/bracket TR5 & TR250 original 21 164.118 2 Spring 27 141.304 1 Interior mirror with fixing screws & P.I. CR1 on & Carb. CF1 on plastic blocks 28 133.399 1 Mirror mounting kit (3 pieces)

© V a n G e s t e l B & C 2 0 0 2

118 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Grommets and blanking plugs • TR6

Floor plug

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 121.655 1 Complete grommet & plug kit 2 121.656 1 Front grommet & plug kit 3 122.180 1 Vent rod grommet, 1/2" P.I. to CR1 & Carb. to CF14 063.064 1 Heater connector gasket 5 122.009 2 Blanking plug, 3/8" 6 122.153 1 Radio aerial grommet, 1" 7 122.193 1 Oil pressure tube grommet, 1" 8 122.193 1 Choke cable & water valve grommet, 1" 9 122.153 3 Speedo & tacho grommet, 1" 10 122.026 1 Blanking plug, 1" 11 122.153 2 Side marker lamp grommet, 1" 12 122.180 1 Indicator lead grommet, 1/2" Carb. CF27001 on13 043.137 1 Steering column grommet, 2.3/8" P.I. to CP75000 & Carb. to CC7500014 043.146 1 Steering column seal P.I. CP75001 to CR1 & Carb. CC75001 to CF115 043.147 2 Steering column seal P.I. CR1 on & Carb. CF1 on16 122.198 1 Wiring loom grommet, driver’s side 1.1/2" 17 122.153 1 Wiring loom grommet, pass. side 1" 18 122.180 1 Bonnet release grommet, 1/2" 19 122.197 1 Wiper rack grommet, 1.1/4" 20 122.180 1 Windscreen washer cable grommet, 1/2" 21 122.180 2 Windscreen washer tubing grommet, 1/2" 22 122.436 2 Blanking plug, 5/16" Carb.23 121.657 1 Cockpit grommet & plug kit 24 122.193 2 Handbrake cable grommet, 1" 25 011.400 1 Blanking plug, 2.1/2"

ILL N° PART N° QTY DESCRIPTION APPLICATION

26 122.432 2 Blanking plug, 7/8" 27 122.193 1 Gearbox loom grommet, 1" 28 122.179 2 Blanking plug, floor panel, 3.1/4" 29 122.433 2 Blanking plug, floor panel, 5/8" 30 122.026 2 Blanking plug, 1" 31 122.021 2 Blanking plug, 1/2" P.I.32 121.658 1 Rear grommet & plug kit 33 122.180 1 Number plate lamp grommet, 1/2" P.I. to CR1 & Carb. to CF134 101.289 1 Fuel filler grommet, 2.3/8" P.I. 122.435 1 Fuel filler grommet, 2.3/8" Carb.35 122.432 1 Blanking plug, cross member 7/8" 36 122.225 A/R Sponge seal, petrol tank 37 122.224 1 Blanking plug, fuel drain, 1.3/8" P.I. CP75001 on & Carb. CC75001 on & Germany38 122.026 2 Blanking plug, 1" 39 122.197 1 Fuel vapour tube grommet. 1.1/4" Carb. CC50001 to CF1 122.153 1 Fuel vapour tube grommet. 1" Carb. CF1 on40 122.195 1 Fuel vent pipe grommet. 1" P.I. to CC50000 122.197 1 Fuel vent pipe grommet. 1.1/4" from (c) CC50001 approx.41 122.026 1 Blanking plug, 1" 42 122.434 3 Blanking plug, 1/4" Carb.43 122.026 1 Blanking plug, 1" 44 122.193 2 Fuel pipe grommet. 1" P.I. CR1 on & Carb. CF1 on45 122.026 1 Blanking plug, 1" Carb.46 122.021 4 Blanking plug, 1/2" 47 122.026 1 Blanking plug, 1"

Steeringcolumn

119© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Hood frame & hood

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 153.295 1 Hood, black PVC, without zip window TR5-TR250 153.296 1 Hood, black PVC, with zip window TR6 153.444 1 Hood, black acryl cloth, with zip window Very nice & sun-fast 153.647 1 Hood, beige acryl cloth, with zip window Very nice & sun-fast 2 134.173 1 Retainer bar 4 152.097 8 Button, black 5 152.096 8 Socket, black plastic 6 152.117 7 Rivet 7 152.095 13 Stud, black 152.216 13 Stud, white 8 163.178 7 Washer, plain 9 122.281 7 Foam pad 10 165.727 2 Screw, self-tapping 11 152.095 2 Stud, black 12 163.178 2 Washer, plain 13 172.572 6 Rivet 15 134.046 1 Centre channel 16 133.182 1 LH outer channel 17 133.181 1 RH outer channel 18 172.372 9 Rivet 19 121.192 1 Header rail seal 20 162.077 5 Screw 21 164.012 5 Washer, spring 22 161.458 5 Rivnut 23 141.571 2 Latching handle assembly 24 141.406 2 Handle, chrome 25 141.408 2 Escutcheon 26 164.045 2 Washer, waved 27 162.831 2 Screw, countersunk, metric 162.585 2 Screw, UNC 28 141.407 2 Locking pin metric threaded 135.287 2 Locking pin UNC threaded 29 162.403 4 Screw, countersunk 30 163.013 4 Washer, plain 31 164.016 4 Washer, shakeproof 32 161.024 4 Nut 33 185.019 1 Tool for fasteners 34 200.419 1 Revolving punch tool

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 159.402 1 Cantrail seal & channel kit 2 121.228 2 Front rubber seal 3 133.704 2 Front channel 4 121.283 4 Velcro strip, front 5 121.229 2 Rear rubber seal 6 133.705 2 Rear channel 8 162.830 18 Screw 9 163.012 18 Washer, plain 10 164.062 18 Washer, shakeproof 11 161.461 18 Nut 12 152.036 A/R Button, metal 13 152.037 A/R Socket, metal 14 152.117 A/R Rivet 15 152.035 A/R Stud, metal 16 159.450 2 Hood webbing 17 172.461 2 End loop pin 18 133.729 8 Webbing plate 19 172.572 16 Rivet 20 155.050 1 Hood frame TR5, TR250 155.032 1 Hood frame without header rail TR6 21 134.761 1 Header rail 22 152.217 4 Rivet 23 163.011 2 Washer, plain 27 152.218 4 Rivet 28 164.046 24 Washer, plain 30 152.219 2 Rivet 31 163.304 4 Washer, spacer 33 134.768 1 LH link, front 34 134.767 1 RH link, front 35 133.939 2 Washer, plain 36 162.077 2 Screw 37 161.061 6 Nut, nyloc 41 152.220 2 Rivet 42 052.641 6 Rivet 45 162.208 2 Bolt 46 163.142 4 Washer, plain 48 162.515 2 Screw 51 122.441 2 Rubber buffer TR5 & TR250 52 152.221 2 Rivet 53 163.013 2 Washer, plain 55 152.097 5 Button, black 56 152.096 5 Socket, black plastic 57 172.372 5 Rivet 58 152.095 5 Stud, black 59 162.935 6 Screw, countersunk

Hoods are supplied with fasteners to be fitted on the hood

© V a n G e s t e l B & C 2 0 0 2

120 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Tonneau cover & hood cover

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 153.655 1 LHD tonneau cover, black PVC TR5 & TR250 153.299 1 LHD tonneau cover, black PVC TR6 P.I. 153.653 1 RHD tonneau cover, black PVC TR5 153.457 1 RHD tonneau cover, black PVC TR6 2 153.303 1 LHD tonneau cover with TR6 headrest pocket, black PVC 153.461 1 RHD tonneau cover with headrest pocket, black PVC 4 152.150 1 Centre bracket TR5, TR250 5 152.151 2 Side bracket TR5, TR250 8 152.137 1 Centre bracket TR6 9 152.138 2 Side bracket TR6 11 152.036 4 Button, black TR5, TR250 12 152.037 4 Socket, black 13 152.147 4 Eyelet TR6 14 152.148 4 Washer, eyelet 15 152.096 19 Socket, black plastic 16 152.097 19 Button, black 17 152.030 1 Lift the dot’ 18 152.031 1 Clinch plate

ILL N° PART N° QTY DESCRIPTION APPLICATION

19 152.095 19 Stud, black 20 172.572 12 Rivet 21 152.117 7 Rivet 22 163.178 7 Washer, plain 23 122.281 7 Pad 24 152.146 1 Stud 25 185.019 1 Tool for fasteners 26 200.419 1 Revolving punch 30 150.314 1 Hood cover, black TR5 & TR250 150.315 1 Hood cover, black TR6 31 152.096 19 Socket, black plastic 32 152.097 19 Button, black 33 152.095 13 Stud, black 34 152.117 7 Rivet, soft top & angle bar 172.572 6 Rivet, side decks 35 163.178 7 Washer, plain 36 122.281 7 Pad 37 152.095 6 Stud, black 38 165.727 6 Screw, self tapping 39 163.178 6 Washer, plain

TR6Eyelet type

TR250TR5

121© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Hard top and Surrey top conversion • TR5/TR250

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 150.925 1 Soft top, black PVC 2 152.149 4 Hook 3 134.258 1 Stiffener set (3 pieces) 4 152.144 4 Cap, rivet 5 152.145 4 Back, rivet 6 155.036 1 Frame 7 161.009 2 Nut 8 163.088 2 Washer, plain 9 135.165 2 Bush, rubber, end piece 10 152.035 6 Stud 11 172.572 6 Rivet 12 134.346 1 Soft top retainer bar 13 162.445 2 Wing bolt, conversion top 14 163.011 2 Washer, plain, chrome 15 152.036 10 Button 16 152.037 10 Socket 17 172.384 2 Hook bracket On windscreen frame 18 152.035 2 Stud 19 162.335 2 Screw 20 130.166 1 Roof, metal 131.646 1 Roof, alloy 130.147 1 Roof, fibreglass 21 161.457 4 Retainer 22 161.456 4 Nut, square 23 134.778 1 Rear listing rod 24 134.777 1 Centre listing rod 25 134.776 1 Front listing rod 26 135.238 6 Clip 27 150.924 1 Headlining assembly, white 28 151.907 1 Headlining assembly, fibreglass Replaces ill. nos. 23 to 27 29 121.352 1 Finishing strip, headlining, black 30 121.333 1 Sealing rubber, roof/windscreen 31 121.665 2 Seal, side 32 121.334 1 Seal, rear 33 134.345 1 Capping, rear 34 172.967 9 Clip 35 162.816 2 Bolt, domed, chrome 36 133.514 2 Distance tube

ILL N° PART N° QTY DESCRIPTION APPLICATION

37 164.031 2 Washer, anti rattle 38 163.139 2 Washer, plain, chrome 39 162.426 2 Bolt, chrome 40 168.119 2 Washer, spring 41 163.139 2 Washer, plain, chrome 42 168.249 2 Washer, rubber 43 162.409 4 Screw Fitted in body 44 131.644 1 Frame, backlight, alloy 130.148 1 Frame, backlight, fibreglass 45 152.143 2 Seal retainer 46 172.572 8 Rivet 47 121.664 2 Sealing rubber 48 134.344 2 Retainer for conversion top 49 172.372 4 Rivet 50 152.228 2 Stud 51 167.037 2 Rivet 52 135.236 2 Cover plate 53 162.815 4 Screw 54 120.083 1 Backlight glass 55 121.300 1 Rubber, glass 56 121.301 1 Finishing strip 57 133.392 1 Joint piece 58 121.351 1 Seal, backlight/body 59 161.019 7 Nut 60 164.029 7 Washer, shakeproof 61 163.138 7 Washer, plain 62 168.127 7 Washer, rubber 63 167.263 2 Stud 64 168.127 2 Washer, rubber 65 163.138 2 Washer, plain 66 164.029 2 Washer, shakeproof 67 161.019 2 Nut 68 150.923 1 LH finisher 69 150.922 1 RH finisher 70 134.341 1 Windscreen capping Required when Surrey top is fitted 71 172.572 9 Rivet

© V a n G e s t e l B & C 2 0 0 2

122 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Hard top • TR6

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 130.170 1 Hard top assembly Second hand 2 134.779 1 Front listing rail 3 134.780 1 Middle listing rail 4 134.781 1 Rear listing rail 5 135.238 6 Clip 6 137.623 2 Bezel 7 137.624 2 Grille 8 165.728 4 Screw 9 172.168 4 Nut, spire 10 120.112 1 Glass, rear window 11 121.666 1 Rear glass seal 12 120.113 2 Glass, side window 13 121.667 1 RH side glass seal 121.668 1 LH side glass seal 14 121.669 1 RH draught excluder, black 121.670 1 LH draught excluder, black 15 121.671 1 Top to windscreen seal 16 122.277 2 Rubber pad 17 121.672 2 Side deck seal 18 121.673 1 Rear deck seal 19 122.442 2 Rubber buffer 20 137.625 2 Insert 21 162.595 2 Screw, self-tapping 22 161.457 2 Retainer nut 23 161.456 2 Nut, square 24 137.620 2 Tapped plate 25 137.621 1 RH, tapped plate retainer 137.622 1 LH, tapped plate retainer 30 159.442 1 Headlining & cover kit, off white 31 162.444 2 Bolt, domed

ILL N° PART N° QTY DESCRIPTION APPLICATION

32 164.002 2 Washer, spring 33 163.001 2 Washer, plain 34 133.514 2 Distance tube 35 165.729 2 Screw, adjusting 36 162.443 2 Screw 37 164.120 2 Washer, spring 38 163.305 2 Washer, plain 39 122.443 2 Cap, plastic 40 137.626 1 RH fixing bracket 137.627 1 LH fixing bracket 41 162.029 4 Screw 42 164.120 4 Washer, spring 43 163.306 4 Washer, plain 44 141.350 2 Tie bar 45 162.594 2 Screw 46 163.305 2 Washer, plain 47 162.442 2 Bolt, domed 48 164.002 2 Washer, spring 49 163.302 2 Washer, plain 50 141.440 1 RH side moulding finisher 141.441 1 LH side moulding finisher 51 134.203 1 Rear moulding finisher 52 172.581 14 Rivet & clip 53 141.443 1 RH rear corner finisher 141.442 1 LH rear corner finisher 54 172.031 2 Nut, spire 56 121.333 1 Windscreen frame seal 58 130.082 1 Fibreglass hard top kit, black vinyl aftermarket. textured gelcoat

Fibre glassHard top

123© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Seat covers, foams and fittings

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 156.156 1 Pair seat covers, black with white piping TR5 & TR250 156.157 1 Pair seat covers, red with white piping 156.403 1 Pair seat covers, midnight blue with white piping 2 157.025 1 Seat foam kit, 2 seats 3 152.233 1 Seat cover fitting kit, 2 seats 4 172.302 4 Clip, cover to frame 5 152.032 24 Clip, cover to frame 6 172.466 8 Clip, tubular 7 150.455 2 Squab webbing kit, one seat 9 156.158 1 Pair seat covers, black TR6 1969 Europ 10 157.071 1 Seat foam kit, 2 seats 11 151.338 2 Diaphragm All models 12 172.302 8 Clip, back board to frame 13 172.302 20 Clip, squab to frame 14 172.302 18 Clip, valance to frame 15 172.466 8 Clip, tubular 16 152.234 60 Hog ring 17 172.464 12 Clip, back board to frame 18 172.463 4 Clip, back board to frame 22 152.154 20 Clip, diaphragm 23 171.045 2 Spring 24 152.002 1 Stud, tonneau strap All models 25 164.015 1 Washer, spring 26 161.024 1 Nut 27 133.856 2 Knob, safety catch All models

ILL N° PART N° QTY DESCRIPTION APPLICATION

28 172.486 2 Clip, knob 29 122.247 4 Rubber buffer 30 163.145 4 Washer, plain 31 162.825 4 Screw 32 136.487 1 RH seat slide assembly All models 136.488 1 LH seat slide assembly 33 137.641 2 Seat slide fitting kit, 1 seat 34 122.444 2 Rubber cover 35 165.735 4 Screw 36 164.012 4 Washer, spring 37 163.308 4 Washer, plain 38 162.065 8 Screw 39 163.081 8 Washer, plain 40 164.012 8 Washer, spring 41 163.304 4 Washer, spacer 42 162.005 4 Screw 43 163.131 8 Washer, plain 44 161.012 4 Nut, nyloc 45 187.010 A/R Glue spray 46 187.009 1 Glue-pasta-625gr 47 156.160 1 Pair seat covers, black TR6 CP50001 to CP77716 48 157.026 1 Seat foam kit, 2 seats 49 141.544 2 Seat handle 50 162.312 2 Screw 51 164.015 2 Washer, spring

45

7

46

TR6 1969-’74Europe

TR5TR250

TR6 1969Europe

© V a n G e s t e l B & C 2 0 0 2

124 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Seat covers, foams and fittings

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 156.162 1 Pair seat covers, black TR6 to CC50000, USA 1969-’70 2 157.027 1 Seat foam kit, 2 seats 3 156.164 1 Pair seat covers, black TR6 CC50001 to CC85737 USA 1971-’73 4 157.028 1 Seat foam kit, 2 seats 5 172.464 12 Clip, back board to rail 6 172.463 2 Clip, back board to rail 7 172.302 72 Clip, cover to back board/rails 8 150.455 2 Squab webbing, one seat 10 156.166 1 Pair seat covers, black TR6 CR1 & CF1 on, 156.168 1 Pair seat covers, beige USA 1974-’76, Europ 1973 on 11 150.877 2 Head rest assembly, black 150.878 2 Head rest assembly, beige 12 157.029 1 Seat foam kit, 2 seats 13 151.338 2 Diaphragm 14 133.261 A/R Blanking plug, black 15 133.256 2 Eyelet 16 133.257 2 Reinforcement 17 135.239 2 Roller, metal Not interchangeable 18 135.628 2 Roller, nylon 21 172.466 4 Clip, tubular 22 172.302 38 Clip, cover to frame 24 141.544 2 Seat handle 25 162.312 2 Screw 26 164.015 2 Washer, spring 27 086.146 1 Seat belt sensor 31 152.154 20 Clip, diaphragm

ILL N° PART N° QTY DESCRIPTION APPLICATION 32 152.002 1 Stud, tonneau strap All models 33 164.015 1 Washer, spring 34 161.024 1 Nut 35 133.856 2 Knob, safety catch All models 36 172.486 2 Clip, knob 37 122.247 4 Rubber buffer 38 162.825 2 Screw 39 163.116 4 Washer, plain 40 163.070 4 Washer, plain 41 163.070 4 Washer, plain 42 234.053 1 LH seat slide assembly All models 234.052 1 RH seat slide assembly 43 122.444 2 Rubber cover 44 137.641 2 Seat slide fitting kit 45 165.735 4 Screw 46 164.012 4 Washer, spring 47 163.308 4 Washer, plain 48 162.065 8 Screw 49 164.012 8 Washer, spring 50 163.081 8 Washer, plain 51 163.304 8 Washer, spacer 52 162.005 4 Screw 53 161.012 4 Washer, plain 54 163.131 8 Nut, nyloc 55 187.010 A/R Glue spray 56 187.009 1 Glue-paste-625gr

USA 1969-’70

USA 1971-’73

USA 1974-’76Europe 1973-’74

56 8

55

125© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 151.787 1 Panel kit, black (white piping) TR5 & TR250 151.788 1 Panel kit, red (white piping) 151.915 1 Panel kit, midnight blue (white piping) 2 151.342 1 Panel kit, black TR6 1969 3 151.344 1 Panel kit, black TR6 1970-’72 4 151.346 1 Panel kit, black TR6 1973 5 151.348 1 Panel kit, black TR6 1974-’76 151.350 1 Panel kit, beige 6 151.354 1 Pair tunnel panels Without speaker hole 7 151.353 1 Pair tunnel panels With speaker holes 8 172.138 34 Panel clip

ILL N° PART N° QTY DESCRIPTION APPLICATION

9 162.817 1 Set of 50 screws & washers 10 172.253 4 Washer, cupped 11 152.128 4 Cap, black 12 150.381 1 Pair door cappings with door pull 13 150.382 1 Pair door cappings 1974 on 14 137.629 2 Escutcheon, plastic, black 15 141.460 2 Pocket 16 141.459 2 Grab 17 161.062 6 Nut 18 162.054 6 Screw 19 150.038 2 Draught excluder See page 114

Trim panels

TR5, 250 1967-1968TR6 1969CP 25000 - CP 50000 / CC 25000 - CC 50000

TR6, 250 1970-1972CP 50000 - CR1 / CC 50000 - CF1

TR6 1973CR1 - CR 5000 / CF1 - CF 12500

TR6 1974-1976CR 5000 - ON / CF 12500 - ON

Clip & washer kit

Screw & washerkit - 50pcs

© V a n G e s t e l B & C 2 0 0 2

126 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Carpet and sound deadening

ILL N° PART N° QTY DESCRIPTION APPLICATION

1 151.333 1 Wool carpet set, black 151.334 1 Wool carpet set, red 151.335 1 Nylon carpet set, black 151.336 1 Nylon carpet set, red 2 151.339 1 Under felt kit, carpet 3 187.009 A/R Glue 4 151.577 1 Wool floor mats, pair, black 151.579 1 Nylon floor mats, pair, black 6 152.152 16 Ring 7 152.153 16 Socket 8 167.037 16 Rivet

ILL N° PART N° QTY DESCRIPTION APPLICATION 9 152.035 16 Stud, short 152.193 A/R Stud, long 12 151.931 1 Under felt kit, fuel tank 15 131.334 1 Tunnel cover 17 162.338 12 Screw 18 163.052 12 Washer, cupped 20 121.231 1 Gear lever gaiter 21 121.220 1 Gear lever grommet, lower 22 159.349 1 Handbrake boot, black 23 151.908 1 Sound deadening kit

Carpet set

Under felt kit

Sound deadening kit

127© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Gearbox tunnel and boot trim

ILL N° PART N° QTY DESCRIPTION APPLICATION

TR5, 250 1 131.319 1 Plastic gearbox cover 2 121.209 1 Gearbox cover seal set 3 133.562 1 Gearbox cover fitting kit 4 162.454 10 Screw 5 163.108 7 Plate washer 6 163.011 3 Washer, plain 7 162.454 7 Screw 8 163.011 7 Washer, plain 9 161.269 7 Nut & retainer 18 122.193 1 Grommet 19 011.400 1 Plug 20 121.220 1 Grommet, gear lever 21 151.909 1 Fuel tank casing board TR5 151.910 1 Fuel tank casing board TR250 22 165.748 8 Screw 23 163.013 8 Washer 24 172.080 8 Spire nut 26 151.911 1 Spare wheel cover 30 152.035 2 Stud 31 167.037 2 Rivet 32 152.193 2 Stud 33 162.504 2 Screw

ILL N° PART N° QTY DESCRIPTION APPLICATION

TR6 34 131.426 1 Spare wheel cover TR6 38 172.409 1 Latch 39 151.351 1 Boot carpet, black P.I. models 151.352 1 Boot carpet, black Carb. models 40 167.037 4 Rivet 41 152.035 4 Stud 42 152.152 4 Ring, spiked 43 152.153 4 Socket 44 151.367 1 Boot liner kit & fasteners P.I. models 151.356 1 Boot liner kit & fasteners Carb. models 45 137.655 1 Boot liner fitting kit 46 172.080 12 Spire nut 47 165.748 12 Screw 48 163.013 12 Washer, plain 58 165.748 8 Screw 59 163.013 8 Washer, plain

Seal kit

TR5TR250

Boot trim

TR6

© V a n G e s t e l B & C 2 0 0 2

128 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Colour name Description Years used Factory code Spray 400ml

Primer on metalPrimer on aluminiumPrimer on plastic

187.013187.014187.015

Silver grey, wheels & rocker cover 187.004

Black wrinkle paint 187.008

Black Black all 11 187.016

White Creamy white all 19 187.070

Jasmine Light soft yellow 1967-1972 34 187.080

Inca Ochre 1976 94-BLVC207 187.030

Mimosa Olive, yellow/green 1973-1975 64 187.082

Faffron Saffron yellow 1971-1972 54 187.084

TopzazRusset brownMapleSienna

Light brownDark brownDark brownVery dark brown

1975-19761976

1974-19771971-1973

8493-AAE

8323

187.085187.103187.102187.104

Signal redPimentoCarmine Damson

Bright red (post red)Bordeau redDark warm redBrown red

1967-19711972-19761973-19761969-1972

3272

82-CAA17

187.071187.087187.088187.089

JavaEmeraldConifer greenLaurelBritish Racing Green

Fresh greenGreenDark greenDark greenDark green

1975-19761972-19731967-19701969-19711975-1976

85-HAB65255575

187.098187.101187.075187.100187.074

Wedgwood blueFrensh blueTahiti blueValencia blueDelft blueRoyal BlueSapphireMallard

Light sky blueLight blueAzure blueDurty blueDelft (Holland) blueVery dark blueDark blueVery dark blue

19671973-1975

19761967

1975-761967-19711971-19741973-1974

2612614666

1365696

106

187.073187.092187.064187.095187.094187.072187.096187.142

Magenta Purple 1973-1974 92 187.090

Colour code list

129© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Part nr.

150.146

White felt sheet60X65CM

Part nr.

154.001

Part nr.

150.144

Black felt sheet125X76CM

Part nr.

151.097

Thick insulation felt 1m2

Part nr.

152.077

Part nr.

152.096

Part nr.

152.095

Part nr.

152.035

Part nr.

152.037

Part nr.

152.036

Button

Button

Socket

Stud Stud (pvc)

Socket (pvc)

Part nr.

152.096

Fastener platebottom Rivet

Punch & bed kit

Part nr.

185.019Part nr.

167.037

Carpet fastenersPart nr.

152.152Part nr.

152.153

Part nr.

152.035Part nr.

152.193

Ring Socket

Low stud High stud

Black hardura100X140CM

Insulation felts, press studs & carpet fasteners

Press stud fasteners

© V a n G e s t e l B & C 2 0 0 2

130 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Breather hose adaptor

1/2” Flange 3/4 Long

Chrome rocker cover nuts kit

Part nr.

185.100

Part nr.

185.075

Part nr.

011.757TR-6 Polished alloy rocker cover with breather pipe• 185.661 Black alloy rocker cover with breather pipe

Gasket for rocker coverSpare chrome filler cap

Roller rocker assembly

Engine breather filterTo be fitted when closed circuit

crankcase breather system is not connected, for effective filtration

Aircraft alloy collarFor in- exhaust valve. Sold individually

Part nr.

012.454

Valves• 012.178 Inlet 36.6mm• 012.179 Exhaust 31.9mm (214N)

Uprated double valve spring set

Part nr.

185.727

Aluminium rocker cover black wrinkle paint finish

Improve your TR Rocker ShaftReduce the side load on the valves.Reduce valve guide wear by the rolling action of the tip of the rocker over the valve stem. Because they run on roller bearings, friction in the engine is reduced.Increases the lift from 1.5 to 1.65:1. Check clearance valve/piston

Part nr.

012.634

Part nr.

012.728

Part nr.

101.422

Valve guides Made from Manganese

bronze for lead free petrol• 012.373 Exhaust

• 012.367 Inlet

Part nr.

016.182

Part nr.

012.896

Engine & power tuning

131© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Part nr.

013.775

Part nr.

330.060

Tuftrided lightened cam follower

Sold individually. Tubular push rod strong and light to

improve rigidity

40gr. Assembly lube for camshaft, followers and push rod

Part nr.

018.050 Set of rocker spacers To replace the spring tensioners from the ‘oe’ rocker shaft

Part nr.

185.682

Timing discA must for accurate valve timing setting

Part nr.

013.571

Fast Road Camshaft

Part nr.

013.819

Cam kit

Part nr.

013.210

Part nr.

013.572

Vernier - Adjustable double cam sprocketFor accurate valve timing. Essential to get the best from any performance camshaft

Steel push rods

Double row timingTiming chain double row

Part nr.

013.211

Engine & power tuning

Partn°

013.774013.576

Description

8.11”, sold individually8.25”, sold individually

Cranck sprocket

© V a n G e s t e l B & C 2 0 0 2

132 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Bottom

Part nr.

012.402

Rocker feed kitThis kit will increase the supply of oil to the rocker shaft

Part nr.

185.650Part nr.

185.166

Spin-on conversion kitWith this kit you avoid that the oil drains

back to the sump. Gives you a quick oil filter change

Part nr.

011.131

Oil filter Spin-on

Part nr.

185.132 Adaptor for oil cooler hoses and spin-on conversion. All in one system

Part nr.

185.133

Pair oil cooler rubber hoses

Part nr.

023.275 Oil drain plug magneticThe magnetic plug will collect metal, so your

oil system is protectedPart nr.

185.440 Oil cooler shroudEngine oil works better within a given temperature range, and an oil cooler makes sure this is maintained in the summer. In the winter, this same cooler can cause undercooling. This easily mounted shroud makes sure this doesn’t happen in the winter. Put it on in Autumn and take it of in Spring. Takes a few seconds to install.

Top

Partn°

060.003060.041

Description

13 row type15 row type for heavy work

Oil filters & oil coolers

Oil cooler Radiator

Spin-on oil filter adaptor + oil thermostat + 4 SS hosesGives your engine the extra protection This kit includes a spin-on for easy oil filter changes, an oil thermostat for quick warm up for the oil and better cooling when hot and 4 stainless steel braided hoses

133© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Part nr.

081.195

Sport coil Lucas 12V• Improves the ignition performance• Up to 40.000 volt output• Easier starting• Do bypass the ballast resitor• 081.789 Sport coil Lucas 6V• Use this coil with ballasted high performance spark plugs• NGK spark plugs recommended: “The ultimate spark plug”

NGK Spark Plugs give improved reliability and performance and they cover a wider heat range. The ‘V’ type spark plugs have been specially designed for ‘Lead Free’ fuel and have gold palladium centre electrodes which give good ignitiability. The higher the reference figure, the higher the compression. B ES stands for : Copper core recessed nose BP ES stands for : Copper core projected nose EV stands for : Gold palladium projected electrode nose.

Part nr.

081.639

Competition performance silicone lead set

To replace contact breakers and condensers

Lumenition is proud to present the NEW Magnetronic Ignition System. Designed to replace troublesome points

with a simple drop in installation. Each unit comes complete, ready to fit straight into your existing

distributor. You will notice that your car will start immediatly, have better fuel

consumption, and increased performance. The Magnetronic Ignition System

is suitable for most Lucas distributors, NEGATIVE EARTH and with or without

vacuum advance.

Optronic ignition systemLumenition Optronic Ignition is an electric ignition conversion kit principally for cars originally fitted with

mechanical distributors using contact points. The advantage of the Lumenition system is that it contains no wearing parts, requires no adjustment or maintenance during service and once ignition timing is set it will remain permanently tuned. The engine will start better, last longer and run more economically through

improved efficiency. There are only three components, very compact and simple to fit.

System with mechanical distributor and contact points.

Lumenition, no wearing parts & always perfect timing.

Magnetronic ignition system

Fitting kit for distributor

Power supply module

The benefits of the Magnetronic are: it is quick and easy to fit, completely self contained within the distributor and is a two wire connection. The unit is housed in a solid die-cast dissipating body which is unaffected by

distributor wear and gives all the advantages associated with our Ignition Systems.

NEGATIVE EARTH ONLY!!!

Part nr.

135.807

Module bracketFor Lumenition optronic ignition module. With this bracket you can fit the module without drilling holes in your car.

Part nr.

086.082

Part nr.

086.081

Part nr.

086.579

Partn°

012.389012.354012.512

Description

BP5ES STDBP7ES High comp.BP7EV Competition

NGK spark plugs

Engine & power tuning

Part nr.

082.109

Replacement Starter

This modern reliablestarter gives more torque with less power drain when starting,

this makes him ideal for dialy use. They are also easier to install as they are

much lighter and smaller

Originally for Negative earthed

cars, ask for wiring info with positive

earthed cars.

Ask your local

Anglo Parts shop

for more information

© V a n G e s t e l B & C 2 0 0 2

134 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Part nr.

060.066

TR6 Alloy radiator• 060.114 TR5 Alloy radiator• Made to the original design to save in weight and improve cooling

Part nr.

017.093

Part nr.

061.412

Part nr.

110.283

Alloy water pump pulley

Alloy water pump house

Mounting The standard specification includes adjustable body/chassis mountings to secure the fan adjacent to but not connected to the radiator - totally adjustable and therefore suitable for almost every vehicle. A no-cost option is direct radiator fitting incorporating moulded mountings that extend beyond the fan to provide a simple secure four point mounting without drilling, or use of spanners. (not recommended for aluminium core radiators). Automatic Control Adjustable between 45 deg.C and 120 deg.C. with 3 deg.C. differential. Advanced heavy-duty design allows continious on/off switching without a relay. A Simple sensor entry using patented silicone extruded rubber seal for capillary provides watertight entry without cutting hose or drilling radiator - see diagram.

For your Triumph suffering from overheating in modern traffic during high summer ambient we recommend the Kenlowe is used in addition

to the engine fan to provide extra cooling to combat the overheating.

Kenlow fan kit

Maniflow Tubular exhaust manifoldsThese British made tubular exhaust manifolds improve engine

breathing and reduce back pressure. All carefully jigwelded and designed for maximum

performance. Might not be allowed for road use in all countries but certainly is an important improvement

for the sporting enthusiast who is looking for that extra power.

Part nr.

198.044

Water WetterThis super coolant helps

control overheating. Your car can run up

to 7°C cooler. 355ml.

Part nr.

185.127

Engine & power tuning

135© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

NARROW HEAD UP TO 1972

WIDTH HEAD 1972-ON

K&N Compact AirfiltersFor easy access choose K&N compact filtersK&N filters offer greatly improved air-flow. Elements are re-usable. Their reinforced cotton weave is impregnated with a specially formulated oil to retain airborne particles. When it comes to performance K&N is the world best filter. No other filter with the same size will flow as much air as a K&N. This filter will increase horsepower and improves throttle response. A full maintenance documentation comes with each filter.

K&N Rampipe • Improves airflow• Use with K&N filters• Sold individually

Part nr.

016.212Part nr.

016.211

Part nr.

101.333

Part nr.

101.231

Part nr.

101.422

Part nr.

190.428

Part nr.

330.070

Part nr.

190.225

Part nr.

186.042Part nr.

186.043

Part nr.

200.572

Haynes carburettor workshop maualThis manual covers Weber, Stromberg & SU carburettors. Many illustrations and excellent step by step explainations. 270X211MM, 350 pages

Tuning SU carburettors GR WadePublication in tuning & maintaining all types of SU carburettors and fuel pumps. 189 pages216X140MM

Carburettorsynchroniser

Breather hose adaptorFor connecting the breather hose into the filter backplate1/2” Flange, 3/4” long

Damper oil 125 ml

This is the right oil for your SU

K&N airfilter offset

tapered

K&N Air filter cleanerK&N developed a special air filter cleaner. Do not use compressed air or detergents, this can damage the cotton fabric and harden the rubber

Special K&N oil sprayAfter cleaning with 186.043, dry the filter and re-oil with the special K&N oil

Conversion kit Stromberg to SUThis conversion kit is your ultimate solution, due to the fact that Stromberg carburettors are hard to find.

The set includes two new HS6 1 3/4 carburettors and linkage. This is the best investment for your TR!

When standard air filters are changed to K&N, you will improve airflow. We recommend that you also change carburettor fuel needles

Part nr.

102.620

016.21124 mm between ports

016.21216 mm between ports

SU conversion & accessories

© V a n G e s t e l B & C 2 0 0 2

136 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Part nr.

011.519

Part nr.

106.070

One Weber 40 DCOECarburettor assembly

For maximum power, we recommend that you set up the Webers to your & your engine’s specific

requirements. Have it done by a professional, read the specific books (190.416 or 190.428)

(order 3 pieces)

Part nr.

106.008

Rampipe 45To be used with the K&N air filters

(order 6 pieces)

Triple Weber alloy inlet manifold• Made in one piece • Comes with linkage for the wide inlet port ‘72 on

Part nr.

101.340

Preset fuel pipe set • Made in aeroquip for your triple Webers• Easy to install

Weber carburettors & accessories

Part nr.

106.067

Rampipe 40To be used with the K&N air filters

(order 6 pieces)

137© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Partn° Description

101.575 45 mm thick for 101.195 & 101.578101.576 63 mm thick for 101.441101.577 83 mm thick for 101.442 & 101.579101.831 63 mm thick for 101.830101.833 83 mm thick for 101.832

Part nr.

190.416

Part nr.

190.428

Speedpro series, Weber & DellortoDCOE & DHLA Carburettors, the sidedraft carburettors, how to build, power tune, strip and rebuild. How to get the right set up for your engine. 112 pages

Haynes carburettor workshop manualThis manual covers Weber, Stromberg & SU carburettors. Many illustrations and excellent step by step explainations. 350 pages

Triple 40 DCOEPart nr.

106.003Part nr.

106.004Gasket, sealing ring on plate(order per 3 )

Grommet,vibration(order per 12)

Cup washer(order per 24)

K&N

Part nr.

106.002

K&N Airfilter assemblies K&N Airfilter elements

K&N airfilters & accessories

The only competition airfilter meeting dust efficiency levels demanded by engine’s manufacturers

Part nr.

101.422Breather hose adaptorFor connecting the breather hose into the filter backplate 1/2” Flange, 3/4” long

Partn° Description

101.195 Large oval unit 45 mm thick offset101.441 Large oval unit 63 mm thick offset101.442 Large oval unit 83 mm thick offset101.578 Large oval unit 45 mm thick in-line101.579 Large oval unit 83 mm thick in-line101.832 Small oval unit 83 mm thick in-line101.830 Small oval unit 63 mm thick in-line small oval = 185 x 120 mm • large oval = 228 x 135 mm

© V a n G e s t e l B & C 2 0 0 2

138 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Fuel pressure regulatorThis adjustable fuel pressure regulator eliminates high-end

power fade. The fully adjustable dial settings ensure proper metering of fuel for consistent low or high-end power.

Comes complete with unions from 1/4”, two hoses and clips.

In-line fuel filter from purolatorIt is important that your fuel is filtered properly. This chrome plated fuel filter, complete with unions, hoses and installation clips will do the job right. Toughened glass file, cleanable filter and 1/4” bore

Part nr.

101.191

Part nr.

101.819

Part nr.

101.821

Part nr.

172.051

‘T’ piece for fuel hoses

Part nr.

102.096

Part nr.

108.247 King filter regulator with glass bowl (67 mm)1.5 - 5 PSI1/4” bore• 108.248Replacementfuel filter

Part nr.

101.827

Spacer with vacuum breatherHS6 1 3/4”

Part nr.

101.169Part nr.

016.250

Spring

Fasteneraccelerator cable

Washer, oval2 holes to hold a spring

Cable fastener

Screw

Plug, 5/8” UNF

Vacuum adaptorfor servo with non return valve 5/8 UNF

Spacer 5/8” thickGasket HS6 1 3/4”

Facet electric fuel pumpHigh pressure fuel pump. Years of proven reliability in race, rally & road specifications. Negative earthed & easy to fit. unions not incl.30 gallons /hour 5 PSI• 108.287 Positive earthed• 108.209 Facet pump45 gallons/hour 7.5 PSI (red label)

Part nr.

171.011

Part nr.

011.315

Part nr.

162.084

Part nr.

162.271

Part nr.

172.054

Part nr.

163.033

Part nr.

172.027

UnionsPair of 90°

unions for facet pump 5/16” bore

• 108.210 Inline unions

Pair with 3/8” bore for facet pump

Part nr.

101.192

Partn° Lengths

102.095 6 cm length101.325 17 cm length101.384 19 cm length101.326 25 cm length101.327 30 cm length101.328 35 cm length101.047 38 cm length

Clip for braided fuel hoses

Flexible fuel hoses

Vacuum adaptorfor servo, 5/8” UNF

Part nr.

011.073

Fuel system improvement

139© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Versa shield60 x 18 cm Universal heat shield to protect starter motors, carburettors, electrical parts, fuel pumps etc.. from heat. Can be cut to shape and secures itself using the velcro provided. Cool-tape

3.5cm x 450cmUsed for wrapping wires, small relay's, hoses etc..

in the engine bay. Very strong adhesive.

Heat shroud90cm long and covers from 2 to 3cm wire or hose. A fast and efficient solution for hoses, lines and tubes. Easy to use and install, the heat shroud utilizes a full length hook and loop material as a closure. Can be cut to length with a sharp knife.

100% asbestos free

100% asbestos free

Exhaust wrap5cm wide by 1500 cm long.Reduces the engine bay temperature with up to 45%. This temperature reduction is beneficial towards breathing. Cooler air and avoiding premature failure on costy engine components due to thermal deterioration. 100% free of asbestos

StrapHandy strap for securing the wrap around tubes and small parts.

Heat screen100cm x 90cm

Designed with many uses in mind. Heat Screen is capable of withstanding direct heat up to 500 C° on one side, while protecting against radiant temperatures

up to 1000 C° on the aluminised side.

Part nr.

159.404

Part nr.

159.405

Part nr.

172.076

Part nr.

159.408

Part nr.

159.406

Part nr.

159.407

Asbestos free heat reduction products

© V a n G e s t e l B & C 2 0 0 2

140 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Alfin brake drumAre made from lightweight alloy with a steel lining. Your car looks like a real race car and it improves the cooling

Four pot calliper brake conversion

Part nr.

053.018

This is a must for your TR, by fitting these hoses you will have a

better brake pedal pressure

Part nr.

053.039

1L Silicone brake fluid1L Dot 4 brake fluidhigh quality

Part nr.

050.261

Set vented cross drilled brake discs

Part nr.

050.121

Part nr.

053.289

TR5-6 Brake pad set uprated Mintex1967 -’72 with 1/4 (6.3 mm) pin holes. For standard brake callipers

Part nr.

053.212

TR6 Uprated brake pad set Mintex1972 -’76 with 3/16 (4.7 mm) pin holes. For the standard brake callipers

Partn°

054.482054.483027.381

Description

Front (use 2 pieces)RearClutch

Aeroquip brake hoses

Part nr.

050.208

Part nr.

053.177

1L Dot 5 brake fluidhigh performance for race & rally

Part nr.

053.295

Part nr.

053.303

TR5-6 Green padsUp to 1972

TR6 Green pads1972 on

Part nr.

050.492

TR5-6 Grooved discs

Brake improvement kits & accessories

Includes: • Vented discs • Alloy callipers with 4 stainless steel pistons and all fittings• 053.291 High performance brake pad set for fast road cars

• 050.303 Set vented brake discs 235 x 20 mm

141© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Part nr.

041.504

Part nr.

041.503Ill. n° Partn° Description Qty

1 041.501 Upper bush 8 3 041.502 Bush, early 44 041.493 Bush, shock 4 5 041.503 Bush 11/16” 2 6 041.504 Bush, link 4 7 043.307 Bush, steering 2 8 032.526 TR4/5 upper mount. 2 9 032.527 TR4/5 lower mount. 2 10 032.526 TR6 mounting 411 041.492 Bush triling arm 4

• Easy to fit • Durable • Oil resistant • Self lubricating• Improved location • Long life • Tough • 2-Year road warranty • Non-perishing • Stainless steel sleeved (where aplicable)

TR4-6 from CT 6344 Wire wheels / CT 6391 Disc wheels

Advanced polyurethane suspension bushes

11

4

7

5

8

9

6

6

11

10

3

1

© V a n G e s t e l B & C 2 0 0 2

142 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Part nr.

043.306

Part nr.

042.528

Adjustable top fulcrum kitThis kit will enable an accurate setting of

the camber from your TR

Part nr.

042.786

LHD Quick racks• 042.962 RHDMade for a faster steering response (2 1/2 turns). Comes with alloy mounts

Rack mounting kitThis kit is made in alloy to

avoid floating steering rack

Part nr.

042.639

Complete rebushing kitThis is an uprated kit with improved steel bushes and sinthed broze bushes

Quick racks & steering

143© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Part nr.

042.434

Part nr.

042.505

Part nr.

042.438

Part nr.

042.425Part nr.

042.515

Part nr.

042.433

Part nr.

042.432

Part nr.

330.001

Part nr.

185.139

Uprated front coilSpax frontadjustable shock

Rear coil lowered

Spax rear adjustable shock

Koni frontadjustable shockKoni rear

adjustable shock

Pair SolidTelescopic Conversion

Bracket Kit

30% uprated valvesOriginal Armstrong shock absorbers can easily be uprated by 30%. All you need to do is change the valve, refill the shock absorber and bleed the unit by placing the shock absorber upright and pumping the arm a few times. The air will mount into the air chamber. Only use these valves with new shock absorbers. Placing them on worn out units will not lead to improvements.

Shock absorber oilFor Armstrong lever arm

shock absorbers

1/2 L. for normal use and for shock absorbers having the 30% uprated valves

1/2 L. for rally & race work only. This oil is slightly thicker. Do not use this oil in combination with 30% uprated valves.

Part nr.

330.002

Front & rear suspension

© V a n G e s t e l B & C 2 0 0 2

144 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Part nr.

161.123

Part nr.

136.056

Part nr.

159.059

Part nr.

136.055

Part nr.

042.097

Part nr.

133.141

Part nr.

185.678

Part nr.

186.034Conversion hub• 042.130 RH• 042.131 LH

Special nut

2 eared spinner3 eared spinner

Octagonal spinner

Protective cover for spinner wrenches

Hammer (1.15 Kg)Made from quality

copper and rawhide

Copper greaseWith wire wheels your hubs and spinners get very hot.Normal grease becomes liquid and disapears, causing them to get stuck with risk of dammage. This copper grease withstands these high temperatures and makes it easy to remove spinners.

Standard wheel wrench

For continental spinners

British wheel wrenchThis is a superior tool when it comes to removing spinners

British wheel wrenchThis is a superior tool when it comes to removing octagonal spinners

Part nr.

185.050

Wire wheel brush

Wooden wheel wrenchThis wheel wrench is super soft for your spinners

Part nr.

200.674

Spoke spanner tool

Partn°

042.071042.072

Description

RH spinner, 8 tpiLH spinner, 8 tpi

Partn°

042.083042.084

Description

RH spinner, 8 tpiLH spinner, 8 tpi

Partn°

042.079042.080

Description

RH spinner, 8 tpiLH spinner, 8 tpi

Wheel fittings & accessories

145© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

1

4

32

Each MWS wire wheel carries a quality assurance certificate. Wheels built with stainless steel spokes and nipples are covered by a full 2 year warranty. Standard painted wire wheels have a 1 year

cosmetic and 2 year structual warranty. These warranties do not cover the following: damage due to neglect in maintenance, during wheel/tyre mounting, balancing or installation on

vehicles. Any product used for competition or fitted with non-standard tyres

Motor Wheel Service Quality Assurance

Ill. n° Partn° Chrome Partn°Painted Vehicle fitment Rim Qty Inset Plated Silver size spokes mm

1 046.005 046.004 TR5 & 6 4.5 x 15 60 19.002 046.023 046.022 TR6 5.5 x 15 72 13.00 3 046.076 046.115 TR5 & 6 5.5 x 15 70 *10.00

4 046.024 Alloy wheel 5.5 x 15 8 * = outset

Please note: Warranty automatically becomes void if wheels have been subject to re-work or change,

or have been fitted with tyres other than the manufacturers recommended fitment.

Center lock wheels

© V a n G e s t e l B & C 2 0 0 2

146 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

8 Spoked Alloy Wheels Supplied with nuts

Part nr.

047.066

Michelin Red Wall 185R15

• 046.132 5 Spoke alloy

wheel 15”x 6”• 046.133

5 Spoke alloy wheel 15” x 7”

Part nr.

161.726

Part nr.

047.064

Dunlop Aquajet 185.VR 15

Part nr.

047.005

Part nr.

047.072

Tyre tube15” Wire wheel rim band

Give’s your tyre tube it’s needed protection against the spokes

Revolution wheelsBlack wheel with diamond cut

The chrome wheel nuts are not included

Chrome wheel nutNut for Revolution wheels, sold individually

TR6 US Wheel rim set(set of 4 pieces)Stainless Steel

Partn° Description Rim size

046.067 For road & rally 5.5 x 15”046.118 FIA specifications 6 x 15”046.121 FIA specifications 5 x 15”161.472 Spare nut

Part nr.

140.188

Wheels & Dunlop tyres

147© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

8 Polishing cloths

Superglym chrome polish, 75 gr.

Instant Tyre Dressing

Clean Wheels

Silicone spray, Chrome protector

Cap, nickle plated

Set of 4 stainless steel TR valve caps

Part nr.

198.033

Part nr.

198.003

Part nr.

198.031

Part nr.

198.020

Part nr.

198.006

Part nr.

187.012

White paint pencil

Part nr.

185.368Part nr.

161.476

Tyre presssure gauge

Part nr.

200.702

Part nr.

198.050

Luster Lace metal polishThis is the best way to polish your chrome

& stainless steelmetal. It’s so simple and so effective. The polish is in the cloth that you wrap

arround your chrome wheels, etc.....Test this simple way of polishing and you’ll be astounded.

Part nr.

198.054

Luster padFor white metal

Part nr.

198.019

Black Tyre paint

Wheel trim & accessories

© V a n G e s t e l B & C 2 0 0 2

148 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Pair invisible light coversProtects against stone & debry

Part nr.

185.445

Pair 7” stoneguards & fittings

Part nr.

185.007

Part nr.

084.052

Socket & wire

Part nr.

084.646

Spot lamp LUCAS type “LR8”

Part nr.

084.054

Bulb

Tripot ‘PL’ lamp unit‘PL’ lights may not be legal for street use, check your local regulations • 084.826 LHD • 084.827 RHD

Competition lamps, bulbs & protection

Spot LampsPart nr.

084.528Part nr.

084.527

Rally Competition

149© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

LHD headlamp bulb(RH dip)• 084.115 RHD headlamp bulb (LH dip)• 084.438 Vertical dip LHD or RHD

Tripot lamp unit7” BPF fitting(May not be legal for street, check your localregulations)• 084.205 LHD• 084.828 RHDNOT E11 APPROVED

headlamp bulb for H4

Part nr.

084.093 Socket & wire

Rear fog lampChrome version ‘E’ APPROVED

Part nr.

084.261

Part nr.

084.110

H4 Lights units• 084.103 LHD H4 light unit• 084.104 RHD H4 light unit• 084.107 LHD+H4 pilot light unit• 084.108 RHD+H4 pilot light unit(All light units are E11 approved)

Part nr.

185.337

Fog or Spotlamp protection coverAn exact authorised reproduction of the original Lucas cover

• 084.603Spot lamp LUCAS

type “SLR 576”

• 084.604Fog lamp LUCAS

type “SFT 576”

• 084.191Fog lamp LUCAS

type “WFT 576”

• 084.193Spot lamp LUCAS

type “WLR 576”

Competition lamps, bulps & protection

Part nr.

084.094

© V a n G e s t e l B & C 2 0 0 2

150 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Reclining SeatsAs many Triumph sports cars get older, the seat frames in particular start breaking up. We have offered a brand new reclining seats to fit all these models using the latest Rover reclining mechanisms and head restraint assemblies. From the picture below you will see how we have concentrated on comfort as well as safety. We use brand new seat slides which give about 7” (170mm) front to rear travel. These slides replace the old Triumph seat base frame and bolt straight to the floor. This design has leather seat faces and squab skirts. The centre fluted section and the face of the headrest however have matching perforated leather.

We list the standard colour combinations, made from the finest BRITISH Leather and a perforated centre section for best comfort. Other colours are available at special request and a 15 % extra cost.

Part nr.

151.832

Black carpet foot mats with logoHeavy duty with anti-slip backing

Part nr.

151.414

Pair rubber foot mats

Partn°

151.577151.579151.578151.580

Description

Pair black woolPair red woolPair black nylonPair red nylon

Partn°

158.312158.313158.314158.315

L/R hand

RHLHRHLH

Colours

BlackBlackBisquitBisquit

Seats & mats

Carpet mats

151© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

4 point road & rally safety beltSuper safe with this 4 point road &

rally safety belt. ‘E’ approved

Anchorage point kitFor fitting an extra safety belt.Comes with the needed bolts, nuts & fitting instructions. Each kit sold for one point. You will need 3 or 4 kits depending on what safety belt you choose.

3 point road & rallysafety belt• Fully adjustable• ‘E’ approved

Pair shoulder strapsMake sure safety belts are comfortable to put on with these shoulder straps

Part nr.

185.441

Part nr.

185.178

Part nr.

185.021

Static belt 3 point• Adjustable lenght • Meets B.S.I., EEC and other International Standards• Complete fitting kit and instructions supplied.

Part nr.

135.787

Part nr.

161.643

Eye boltPart nr.

185.381

Part nr.

185.382

Safety beltEuropean approved3 point with automatic retractor

Competition & safety parts

© V a n G e s t e l B & C 2 0 0 2

152 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Warning lights available in four colours

These warning lights have been specially chosen to suit British dashboards &

fit in our mountng plates. Each light contains a bulb and two lucar terminals

(earth & power).

Two & three hole mounting platesPeriod reproduction mounting plates Our mounting plates for warning lights & switches are made from polished stainless steel. The lights & switches are easily installed as the holes are also the sleeves. The holes have a diameter of 1/2”, there are also holes in the top for mounting under the dashboard.

On-Off switch Please note to use relays from 50 watts onwards.

Lighting switchThree positions: off, side light & head light

Part nr.

083.084

Part nr.

135.755

Part nr.

135.756

Two hole mounting plate

Three hole mounting plate

Part nr.

083.088

Part nr.

086.782

Partn°

083.159083.477086.187086.370

Description

Green lensRed lensAmber lensBlue lens

Warning lights

Rally instruments, tripmasters & warning lights

Battery switch FIA approved

The perfect trip master for professionals and amateurs.

Approved for rallying & racing. With handle to control the

counting; forwards, backwards or stop.

Special knob to get back on track when a mistake is made, also a knob

to temporarily stop recording when leaving the track

for the loo etc. After installation the distance recorder will need calibrating to your car’s

specifications . This can be achieved by testing the distance over 1 km, and noting the difference on the recorder. The recorder must then

be returned for fine tuning.

Part nr.

086.405

Belmogtwin MK IIFully mechanic distance recorder

Part nr.

083.815

Retro TripThe precision

distance recorder.Approved by many historic rallys. Easy calibration in miles & meters.

Belmogtwin ‘R’A strong, reliable and fully mechanical

odometer with two counters. Registers hundreds of a km or

a mile. allowed for F.I.V.A & F.I.A. classic events. 5 mm digits are

illuminated by a light and enlarged by magnifying lenses.Available in 6v

and 12v. Instantaneous zero setting. Setting knob for addition, neutral and

substracting. Figure counter control and setting can be carried out for both counters.

Adjustment gear for very acurate calibration. Supplied complete with fitting T-gear, drive

cable and circlips.

Part nr.

088.092

Belmog “Hanhart” Rally chrono instruments excellent chrono instruments with the following specifications:

(088.087) hour counter with 1/5 second recorder, 60 min. register,+ 10 hour, 60 second sweep, jumping minute hand, pinlever, shock protected, 11 jewels, unbreakable spring, brass alloy case.

(088.088) minute counter with 1/5 second recorder, 60 min. register with coloured minute dial, 60 second sweep, flyback to zero and simultaneously restart, jumping minute hand, shock protected

and extended dust and water resistance, 7 jewels, brass alloy case.

Part nr.

088.087Part nr.

088.088

Part nr.

088.089Part nr.

088.090

Mechanical hour counter

Mechanical Minute counter

Baseplate2 counters

Clip

Part nr.

088.091

Baseplate1 counter

153© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Map reading lightPermanently mounted stylish chrome plated map light. This lamp is for mounting on the dashboard and switches on and off by turning the lamp shade. To be connected to the existing wiring.

Electric radio antenna Fully automatic antenna that responds to the radio being

turned on or off.No more pulling out or pushing

in the radio antenna for protection against

vandalism, car covers, car-wash

etc. Requires 34 cm of depth to mount.

Part nr.

185.410

Part nr.

084.597

Map reading light Just plug it into your cigarette lighter This handy light has a flexible stem with a switch on the top of the light.

Part nr.

084.601

Part nr.

131.656

Aerodinamic Roll Bar

AntennaChrome plated100 CM long& 130 CM cable

Part nr.

185.326

Expandable cup holderThis cup holder can be mounted nearly anywhere and adjusts its

grip to the size of your cup or can. Can be folded up when

not in use.

Part nr.

185.446

Part nr.

131.647

Surrey top

Map reading light Simple but functional light

Freestanding map light with flexible stem. To be connected

to the existing wiring.

Part nr.

084.721

Part nr.

131.653

Rally Roll Bar

Antenna cable200 CM long

Part nr.

185.327

Safety roll bars & practical accessories

© V a n G e s t e l B & C 2 0 0 2

154 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Water temperature gaugemechanical in C°

Ampmeter +60 > -60

Electric clock

Oil temperature gauge mechanical in C°

Double 2" gauge bracket in black wrinkle finish

Single 2" gauge bracketIn black wrinkle finish

Oil temperature gauge adaptorAdaptor piece

Part nr.

086.171

Part nr.

086.326

Voltmeter

Part nr.

086.399

Part nr.

086.170

Part nr.

086.169

Part nr.

135.720

Part nr.

135.719

Part nr.

086.401Part nr.

161.341

Copper packing

Part nr.

168.039

Instruments

Oil pressure gauge mechanical

Part nr.

086.168

155© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Leather rim replacement steering wheels

This is a direct replacement of the vinyl steering wheel. The original

steering Boss remains on the car. Easy installation with a great looking result!

These quality accessories are made from strong, finely finished solid wood. They are a must for the classical driver who likes that bit of extra finesse.Since the early fithties Moto-Lita has been designing and manufacturing unique steering wheels in wood and leather. Each steering wheel is a piece of artwork built by British craftsman. The wooden steering wheels are made from carefully selected cross-laminated timber which is bonded and rivetted to a high quality hand polished alloy 3 spoke frame. They are then handfinished with a hardwearing deep lustre which is resistant to petrol, oil and the elements.

Wood rim mark 3 steering wheel

Leather mark 3 steering wheel

Part nr.

185.557

Part nr.

185.558

Billet centre piece & horn pushsmall type, with TR logo

Billet centre piece & horn push large

type, with TR logo

Replacement centre capwith TR logo

Part nr.

185.160

Part nr.

185.272

Partn°

185.026185.027185.247

Description

35 CM Flat38 CM Flat35 CM Dish

Partn°

185.156185.157185.248

Description

35 CM Flat38 CM Flat35 CM Dish

Partn°

185.090185.098

Description

TR5 BossTR6 Boss

Replacement & Moto-Lita steering wheels

Moto-lita Center Boss

© V a n G e s t e l B & C 2 0 0 2

156 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Vinyl crested knobWith threaded bush inside to fit the original gear shift lever

Wooden knobWith threaded bush inside

to fit the original gear shiftlever

Leather knob with logoUniversal fitting with nylon bush inside the knob

Part nr.

185.037

Wooden knob with logoUniversal fitting with nylon bush

inside the knob

Part nr.

185.036

Partn°

185.556185.559

Car type

TR.TR6

Part nr.

185.555

Walnut gear knobNicely finished quality

Part nr.

185.252

Alloy gear knobWith round top

Part nr.

185.476

Gear lever knobs

157© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Walnut gear knobNicely finished quality

Part nr.

185.252

Walnut veneerSpecial attention has been given to the glossy finish, edges and back to ensure a perfect fit.

We guarantee that your dashboard will be of the highest quality. Please note! Look carefully at the drawings before ordering. Look at all holes and compare these with the ones in your existing

dashboard. Drilling an extra hole in a new dash will damage the finish!!

• 150.853 Pair door cappings with handgrip• 150.854 Pair door cappings without handgrip

TR5-6 1969-’72 to CC 75000Part nr.

151.359

TR6 1972 early, with large hole for hazard switchPart nr.

151.360

TR6 1972 late, with one warning lamp at bottom centrePart nr.

151.361

TR6 1973-’75, with two warning lamps at bottom centrePart nr.

151.362

TR6 1975 on, with three warning lamps at bottom centrePart nr.

151.363

Luxury finishing parts & accessories

© V a n G e s t e l B & C 2 0 0 2

158 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Part nr.

132.927

Number plate holderPolished stainless steel plate holder for front of rear. Sold each

8 polishing cloths

Metal polishThis Autoglym product

is perfect for chrome & metals.

Chrome blanking plugs

Chrome exhaust tail pipe finisherOuter diameter 1.7/8” or 47.5 mm

Part nr.

198.033

Part nr.

198.003

Part nr.

185.095

TR5-6 Stainless steel threshold platesWith laurel leaf design

Partn°

185.346185.347185.348185.349

Description

Pair of plugs 12 mmPair of plugs 22 mmPair of plugs 32 mmPair of plugs 40 mm

Part nr.

185.179

Pair alloy doorsteps

Part nr.

185.266

Quality chrome, alloy & polished stainless steel parts

159© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Part nr.

140.066

TR5 Luggage rack

Part nr.

140.159

Part nr.

140.209 TR6 Luggage rack

Universal boot rackClamp-on aluminium frame with wooden shots, very British

Luggage racks & safety parts

© V a n G e s t e l B & C 2 0 0 2

160 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Part nr.

151.611

Part nr.

132.525

Part nr.

185.325

Mud Flaps

Battery liner

Part nr.

133.568

TR6 late model black plastic grill

Wind deflectorThe wind coming from the back is reduced dramatically up to 140 km/h.. These magnificent wind deflectors are supplied complete with fittings and a storage bag. For our German customers, please note that this is TÜV approved!! This wind deflector is tested and we are proud to say that it really helps. Test it yourself and you’ll be astounded.

Accessories

TR6 Mesh

Part nr.

137.299

161© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Part nr.

141.347

Pair door locks Improved with threaded body and steel securing nut instead of spring-clip

Wing NOT included!!!

Partn°

159.195159.045

Description

TR5 Radiator duct or shroud (all years)TR6 Radiator duct or shroud

Partn°

159.194159.596

Description

TR RH under dash linerTR LH under dash liner

Radiator duct or shroud

Under dash liner

Partn°

138.030138.031

Description

Deflectors front (all years)Deflectors rear (all years)

Deflector front

Wing NOT included!!!Deflector Rear

Wing Deflectors

Accessories

© V a n G e s t e l B & C 2 0 0 2

162 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Part nr.

185.154

Part nr.

185.049

Part nr.

085.096Part nr.

085.158

Part nr.

140.418

Part nr.

133.834

Desmo clamp

Fixing plateStainless steel, this

plate will adapt any badge to the

“Desmo” clamp

Universal badge barStraight bar 61 CM and 3/4” thick, comes with two adjustable feet

Saint-Christopher badge with British Flag

Very authentic, fine detailed chrome platedbadge with U.J. laid in jewellers enamel

Chrome plated “RAC” badge

This high quality “RAC” badge will give your car it’s finishing touch.

Chrome plated “GB” lettersQuality chrome plated solid metal letters.

The “B” for Belgium can be used separately.

Triumph badgeChrome plated badge

Part nr.

185.169

Part nr.

185.198Part nr.

185.705

Chrome plated “TR” badgeChrome plated solid badge from the“Triumph Sports Owner” Association

Chrome plated U.J. badgeFor your car, as a present, souvenir

or award

Part nr.

139.370

Screw kit

Badges, badge bar & fixing plates

163© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Offset stem armOn spring

Long stem armOn spring

Round mirror108mm diameter, Convex glass

Rectangular mirror124X82mm, Convex glass, ‘E’ MARKET

Replacementdrum-fixing nutAs used for all mirrorsshown on this page

Part nr.

141.952Part nr.

141.627

Part nr.

141.117Part nr.

141.953

Part nr.

161.730

Curved stem armOn spring

Part nr.

141.116

Spring back wing mirror stems

© V a n G e s t e l B & C 2 0 0 2

164 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Mirror head

Door mirror arm on spring(incl. rubber gasket & screws)

Chrome plated & Black painted door mirrors(incl. all pieces as seen on photo)

Mirror plinth

Part nr.

133.472

Part nr.

141.125

Partn°

141.123141.122

Description

LH mirror armRH mirror arm

Partn°

141.112141.113141.114141.115

Description

RH chrome plated mirror LH chrome plated mirror RH black painted mirror LH black painted mirror

Racing MirrorOriginal, this racing mirror was specially designed for Mini but very succesfull product for many door applications

Partn°

141.850141.851

Description

RH door mirrorLH door mirror

Racing mirror

165© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Part nr.

141.942

Part nr.

141.930

Lucas Repro Mirror

with Covex glass

Seal

Pair wing

mirrorsChrome plated

LH or RH door mirrorFlat glass, 45° stem

Lucas backplateThis “Lucas” lettered backplate replaces the plain plate on reproduction mirrors.

Part nr.

141.951

Part nr.

122.072

Racing mirror

Part nr.

141.956

TR5 Door mirror

Partn°

141.011141.012

Description

RH wing or LH door LH wing or RH door

608

6846

Racing mirrorBritish Made

Part nr.

141.070

© V a n G e s t e l B & C 2 0 0 2

166 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Part Number A B C D

MEN 199.001 Regular 101 67 60 168->180 199.002 Regular 107 67 61 168->180 199.003 Regular 112 68.5 61 168->180 199.004 Regular 117 68.5 62 168->180 199.005 Regular 122 70 63.5 168->180 199.006 Long 101 72 63.5 180->188 199.007 Long 107 72 64.7 180->188 199.008 Long 112 74 64.7 180->188 199.009 Long 117 74 66 180->188 199.010 Long 122 75 66 180->188

LADIES 199.011 Size 10 86 62 54.5 157->173 199.012 Size 12 91 63.5 54.5 157->173 199.013 Size 14 96 63.5 56 157->173 199.014 Size 16 101 63.5 56 157->173

RAF IRVIN Top quality, supple sheepskin with long rugged wool especially prepared for “IRVIN” jackets. Brown sheepskin with brown leather binding. The inside wool colour in warm honey. Zips are made from heavy duty brass. Belt buckle is made from solid cast brass. Each jacket has the unique “IRVIN” woven lable sewn inside, guarranteeing that it is an official “IRVIN”jacket. Made in England. Do not forget to wear the clothing that you will wear under your original IRVIN jacket at the moment of taking sizes!

Sheepskin flying helmet

Goggleswith safety glass

Leather flying helmet

Millia leather flying helmet This helmet gives protec-tion and keeps your neck warm with it’s extra long neck extension.

The original flying jackets

Part nr.

185.061

Drivers accessories

Partn°

185.054185.056185.059185.060

Description

SmallMediumLarge X-Large

Partn°

185.255185.256185.257185.707

Description

SmallMediumLarge X-Large

Partn°

185.675185.676185.677185.713

Description

SmallMediumLarge X-Large

167© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Fitted picnic basketsTraditional hand woven willow basket

containing Staffordshire English crockery and made to the highest standard incl.4 Bromyard blue plates (for 4 people)

(this item may be different from illustration)

Picnic blanketPicnic Blanket in tartan, fastened

to an nylon groundsheet.(this item may be different from

illustration)

Partn° Description Sizes

185.315 Pittards leather palm,Crochet in Cork colour Small size 185.316 Pittards leather palm,Crochet in Cork colour Medium size 185.317 Pittards leather palm,Crochet in Cork colour Large size 185.318 Pittards leather palm,Crocket in Cork colour X Large size 185.319 Pittards leather Small size 185.320 Pittards leather Medium size

DENTS GLOVES since 1777Today, as in the past, Dents gloves are still handmade in the traditional manner using the finest materials. (made in England)

Part nr.

185.302

Adjustable capWith “TR” logo

Bugatti cap

Lambswool scarves

Drivers accessories

Quality blankets

Part nr.

185.304

Part nr.

185.314

Partn°

185.305185.306185.307

Description

Green TartanBlue TartanCream white

Partn°

185.308185.310185.312185.313

Description

SmallMediumLarge X-Large

Partn°

185.323185.324

Description

Blanket in Scottish plaid Red lapBlanket in Scottish plaid Green lap

Part nr.

185.314

Part nr.

185.304

© V a n G e s t e l B & C 2 0 0 2

168 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Union Jack Flag70 X 100 cm

Union Jack patch

“Union Jack” on pin

Fine chrome & jewellers enamel

Union Jack badgeQuality chrome with jewellers enamel.

A masterpiece for your car.

Screw Nut

Magnetic Union JackFor your car or as decoration & souvenir.measurements: 90 x 55 mm

Union Jack stickerFor your car or as decoration & souvenir.

measurements: 73 x 43 mm

Key fob Union Jack

Union Jack desk dressing flag

Union Jack with dummy screws

If you don’t like to drill fixingholes, you can tape this badge showing screw heads.

Part nr.

185.199

Part nr.

185.174

Part nr.

185.219

Part nr.

185.708

Part nr.

185.002

Part nr.

162.405Part nr.

161.054

Part nr.

085.157

Part nr.

185.210

Part nr.

085.149

Part nr.

185.709

Union Jack accessories

169© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

50 x 40 CM

Hand made enameled reproduction plates. These plates are as the originals, they look so authentic you can’t tell the difference. Perfect decoration for your home, office and garage

Part nr.

185.038Part nr.

185.210Part nr.

185.710Part nr.

185.206

Part nr.

185.195

Triumph parking only

Part nr.

185.185

Part nr.

185.183

Textil “TR” Triumph

Soft adhesive badge, 27mm

Part nr.

185.208

Key fobs

Part nr.

185.536Part nr.

185.483 40 x 40 CMPart nr.

185.482 50 x 40 CM

Enamel sign boards, key fobs & accessories

Part nr.

185.218

TR6 on pin

Part nr.

185.737

Triumph patch

Enamel sign boards

© V a n G e s t e l B & C 2 0 0 2

170 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Originally designed for the aircraft industry, these batteries

have proved ideal for use in racing and rally cars. Lightweight, maintenance free

and with exceptionally high discharge capability. Specially designed for high vibration applications resistance. There is no fear of acid burns or damage to expensive paint.

Being classified as a dry battery they can be fitted either on their side or upright.

15A 260 Din start200x77x145 MM

27A 400 Din start250x97x160 MM

Part nr.

185.331

Smart battery charger

This battery charger is a clever one. The charging power variates depending on the condition

of the battery. No more bowling batteries with this charger. Once the battery

is fully charged, the charger willautomaticly stop. You can also

keep the charger connected for weeks, without any

problem.

Part nr.

185.330

Part nr.

185.328

Part nr.

185.333

Heavy duty starter cablesPut this pair of battery cables in the boot and you are always ready to help someone with a dead battery. These cables are 250 cm long and have strong clamps.

First aid kitOfficial FIRST

AID needs. ‘E‘ Approved, comes in a

strong plastic box to keep clean when

stored.

Foot action tyre pump High performance foot pump, 210 cubic cm air with each press

Part nr.

185.329

Practical accessories

Part nr.

083.174

Battery switch With removable red key

Part nr.

082.122

Part nr.

082.121Sealed lead rally and racing car batteries

Reflextor-triangle Heavy duty, ‘E‘ approved triangle. In case of any emergency, be seen and put this triangle at least 30 meters in front of the obstacle.

Fire extinguisher‘E‘ Approved 1 Kgr dry chemical fire extinguisher. We hope you will never have to use it, but, just in case, have it with you.

Part nr.

185.332

Bulb kit7 piece spare bulb kit. One bulb of each type is included. This kit is for the standard main headlamps and will not fit H4 types. All lamps are foam protected and comes in a handy box .

Part nr.

084.602

Automatic battery conditioner & charger• Automatically recharges used battery cells• Suitable for all vehicle types: cars, motorbike, boats, caravans...• Unique testing facility allowing ‘easy cheek’ on battery capability and condition• L.E.D. monitoring display system/battery status display• Permanent unsupervised use. • Polarity warning signal• Charges every 12 Volt battery with minimum 13.2 Volts. Input can go up to a maximum of 13.8 Volts.

Part nr.

086.604

171© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Connolly leather care kit For cleaning and preserving hides, upholstery and all leather clothing.

Car wash handshoe The perfect cloth for washing your classical

Partn° Description

198.005 480ml car shampoo & conditioner 198.008 Cutting polish for badly damaged paint 198.007 Super resin polish 198.011 Extra gloss protection 198.006 Clean wheels198.031 Instant tyre dressing198.009 Bumper care (rubber) 198.012 Glass polish198.035 Fast glass cleaner (spray)198.013 Interior shampoo 198.010 Vinyl and rubber care198.014 Instant tar remover198.003 Chrome polish, 75 gr. 198.033 8 x polishing cloths198.039 Leather care 198.057 Engine cleaner

AUTOGLYMSimply outstanding

Part nr.

185.343

Part nr.

185.046

Part nr.

185.551

Heavy duty, industrial quality wringer for chamois, towels etc. Specifications: Rustproof all steel frame, maintainance free rollers and bearings, adjustable pressure over the entire length of the rollers for uniform water removal. The complete wringer machine has two strong clamps for easy attaching.

ChamoisWe offer only the best real

natural chamois. These are specially made for the car

industry having larger dimensions than most of them and they are thick and extreamly soft. Approx. 40 x 62 cm.

Made in England of course.

Part nr.

185.334

The professional wringer

Auto Glym & body care products

Part nr.

198.060

Hydra bladeEffortless removal

of shampoo rinse water

Part nr.

198.057

Engine cleanerBio-degradable & water

solouble Removes: oil, grease, dirt, creosote, carbon, inks, dye.....

Connolly hide care Don’t let leather dry out,

use this at least once a yearPart nr.

185.335

Car duster This 100% cotton dusting mop has been specially treated

to trap dust. Shake out and it’s ready to use again. DO NOT WASH OUT

Part nr.

185.351

© V a n G e s t e l B & C 2 0 0 2

172 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Competition Valve LubricantA truly effective lead replacement valve lubricant for use in unleaded petrol under race conditions. Most classic racing cars (single seaters, sports cars or racing saloons) need the protection of lead for valve lubricant to prevent exhaust valve recession.This means it is not advisable to run these race tuned cars on unleaded petrol without risking severe valve seat wear which will destroy the engine.CVL uses proven, advanced fuel additive technology to prevent valve seat recessionunder high engine loads, experienced in race conditions.• OK for 40 L

VSP PLUS Lead substitute &octane boosterTo be added to unleaded fuel as a replacement for 4 star leaded petrol. Most pre-1990 or classic cars have soft 4 valve seats in the engine wich means they cannot run on unleaded petrol without risking severe valve seat wear wich could lead to further significant engine damage.VSP PLUS uses advanced Manganese technology wich:• protects against valve seat recession• Boosts octane of unleaded petrol typically back to 4 old star leaded levels• removes the need to retard the ignition • prevents pinking when using unleaded fuel• tests on U.K. refinery fuels confirm an average increase of 2 octane numbers when added to unleaded fuel• OK for 40 L

Valvemaster PlusCastrol valvemaster is a phosphorous based additive to enable you to use unleaded petrol in your classic car without modifying the soft valve seats in the engine. The formulation has a long history of use as a lead replacement additive in North and South America,Australia, New Zealand and Europe. Castrol Valvemaster is endorsed by the Federation of British Historic Vehicle Clubs (FBHVC) following the tests developed by that independant body. Castrol are confident that it can be used under all driving conditions and that it is compatible with both LRP and leaded fuel. Supplied in 250ml bottles, with a built in measuring device. 10ml treats 10 litres of unleaded giving you the flexibility to fill up with varying quantities of fuel. Castrol Valvemaster Plus has the addition of an octane booster to reduce pinking or knocking in tuned or high compression engines without the need to retune.• 250ml treats 250 litres of unleaded fuel • Ultimate protection against valve seat recession • Provides an octane boost to unleaded fuel, reducing knocking • Protects engine under all driving conditions • Reduces the need to re-tune • Keeps the fuel system clean and provides excellent corrosion protection • OK for 40 L

Part nr.

198.042

Part nr.

198.058

Part nr.

198.059

Lead replacement lubricants

173© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

HPR 20W/60, 5L Replaces SAE 30 and

20W/50. A mineral oil formulated for most post-war classics, particularly high performance vehicles such as MG,

Porsche, Jaguar and Triumph. Suitable for cars running six volt

electric systems, where starter motor cranking speeds require an engine to turn over with minimal

drag. Meets API SJ/CF.

Gearbox oil 40, 1LReplaces EP 90 and SAE 40

For use where oils of EP80, EP90 and 30 and 40 SAE rating were originally recommended.

Suitable for older boxes of either straight cut, synchromesh, epicyclic design, or for overdrives

(such as Laycock), both oils contain no EP additives which can cause serious damage to

gearboxes containing yellow metals, or friction modifiers which can cause slipping in overdrives

and preselector gearboxes.

Hypoid 85W/140, 1LReplacing EP 90, this oil is primarily for post-1960 cars requiring a higher viscosity than Hypoid 80W/90. Also for large commercial vehicles. Exceeds GL5 specifications.

Part nr.

300.501

Part nr.

300.509

Part nr.

300.118

Part nr.

330.001

Part nr.

300.112

Part nr.

330.060

Running-In Oil, 5LRunning-In Oil is designed to promote and control the bedding in process of newly rebuilt engines. It should be used for the first 300 miles and then replaced with theappropriate grade of HPR oil.

Shock Oil 1, 500 mlFor most single and double acting shock absorbers,

including lever arm. Ideal for Jackall systems.

Shock Oil 2, 500 mlA heavier grade to increase the damping rate or to suit

non-piston type shock absorbers. Ideal for competition use.

Part nr.

330.002

Cam Assembly Lube, 40 grmFor lubricating engine components during assembly

not for use on pistons or in the ring area.

Part nr.

330.070

How much & what oil you need Models Engine Gearbox Axle TR5/250/6 HPR 20W/60 - 5.1L. Gearbox non O/D - Gearoil 40 - 1.2L. Hypoid 85W/140 - 1.4L. 1967-1976 Gearbox O/D ‘A’ - Gearoil 40 - 2L. Gearbox O/D ‘J’ -Gearoil 40 - 1.5L.

Penrite oils

Damper Oil, 125 ml Specifically formulated for SU carburettors (both damped and non-damped) of all ages and certain Stromberg carburettors.

© V a n G e s t e l B & C 2 0 0 2

174 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Millers Classic 20W/50Classic 20W/50 : An all mineral formulation giving the classic car owner a performance oil with good characteristics for maintaining oil pressure and minimising consumption.

Millers Hypoid 85W/1401 litre axle oilConventional mineral oil formulation with proven additive system for long term performance.

Millers Classic SportThis semi-synthetic 20W/50 grade was originally developedto meet demands of classic race and rally cars. Besides being a superb oil for classic race and rally, this oil is also great for the more enthusiastic driver. It’s high temperature viscosity characteristics ensure good oil pressure and low consumption.

Millers Transverse ‘M’ Gearbox oil

Specially developed lubricant for gearbox in sump cars. This special 20W/50 oil has

been proven its benefits by many MINI owners reported as; easier gear changes, quieter,

better limited slip performance etc..

Part nr.

300.133

Oil drip panIs usefull to put under your lawn-mower, British bike or even under your classic

Millers oils & oil drip pan

How much & what oil you need Models Engine Gearbox Axle

TR5/250/6 Classic 20W/50 - 5.1L. Gearbox non O/D - EP90 GL4 - 1.2L. Hypoid 85W/140 - 1.4L 1967-1976 Gearbox + O/D ‘A’ - EP90 GL4 - 2L. Gearbox + O/D ‘J’ - EP90 GL4 - 1.5L.

Partn°

300.125300.527

Description

1 liter engine oil5 liters engine oil

Partn°

300.123300.525

Description

1 liter engine oil5 liters engine oil

Part nr.

132.646

Partn°

300.124300.526

Description

1 liter engine oil5 liters engine oil

175© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

5 L. anti-freeze

Pre-mixed all season protection coolant up to -25°

Grease Gun

Castrol Classic 20W/501 gallon 4.5 LiterFor pre - 1980 Modern Classic Cars, Castrol Classic XL 20W/50 is a low detergent traditional multigrade engine oil, ideally sited to older technology modern classics. Compared to modern engines using sophisticated oil pumps to deliver higher pressures with low viscosity oils, modern classic vehicles have wider tolerances and require higher viscosity multigrade oils to operate at the optimun performance level. Castrol Classic XL 20w/50 offers exellent oil consumption and a veryhigh level of engine wear protection. Castrol Classic XL20w/50engine oil is an conventional multigrade engine oil, ideally suited to older technology or high mileage modern Classic cars specificating an SAE 20W/50. Classic XL20W/50 contains a high quality base oil and includes additives specially formulated for classic vehicles. Benefits; Improved oil consumption and oil pres-sure, Reduced engine noise and Slower drain down when not in use.

Castrol Classic Oils Established in 1899, originally as CC Wakefield, Castrol launched their first lubricant for cars in 1906 and have been at the leading edge of motor technology ever since. Choosing the right engine oil for your veteran, vintage or classic vehicle is essential for ensuring peak running condition and maximum wear protection for your engine.

To make this decision easier Castrol has reintroduced their range of famous oil brands, but now using the latest technology, low detergent base oils and in the appropriate viscosities on which veteran,vintage and classics were designed to run. Historically many motor manufatures recommended Castrol by name in their original vehicle

handbooks and now today's owners may continue to follow those original recommandations.

10” sticker

5” sticker

Part nr.

300.522

Part nr.

186.021

Part nr.

200.604

Part nr.

200.749

Part nr.

200.735

Pint • 0.568L.Quart • 1.137L.

Part nr.

186.159 Part nr.

085.418

Part nr.

085.381

Part nr.

186.031

Cartridge Castrol grease, LMX (Bearings)

Cartridge Castrol grease,

LM

Castrol oils & accessories

How much & what oil you need Models Engine Gearbox TR5/250/6 XL 20W/50 - 5.1L. Gearbox non O/D - EPX90 - 1.2L. 1967-1976 Gearbox + O/D ‘A’ - EPX90 - 2L. Gearbox + O/D ‘J’ - EPX90 - 1.5L.

© V a n G e s t e l B & C 2 0 0 2

176 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Loctite gasket products

Part nr.

053.018Part nr.

053.039

Part nr.

053.1771L Silicone brake fluid

1L Dot 4 high qualitybrake fluid

1L Dot 5 high performance brake fluid for race & rally

300ml spray,gasket remover Removes paper, paint, gasket etc.

Form -A- Gasket Nr.1, 200ml gasket cement, tube

Use on both sides of the gasket or direct on the surface.

Castrol silicon spray, 400 mlFor protecting and waterproofing ignition systems and locks, and can be used to protect chrome wire wheels or window channels etc..

Castrol DWF spray, 400 ml

Helps loosen rusty parts or bolts, gives a lubricant coating and protects against corotion

Loctite tube, 3 gr.

Castrol cleanerThis great cleaner is perfect for cleaning engines & mechanical parts

Part nr.

200.591

Part nr.

000.000

Part nr.

198.036

Part nr.

198.016

Part nr.

016.627

Part nr.

016.269

Part nr.

198.017

Part nr.

198.044

Water Wetter

This super coolanthelps control overheating.

Your car can run up to 7°C.

cooler.355ml.

Copper greaseWith wire wheels your hubs and spinners get very hot.Normal grease becomes liquid and disappears, causing them to get stuck with risk of dammage. This copper grease withstands these high temperatures and makes it easy to remove spinners.

Part nr.

186.034

Part nr.

187.012

Part nr.

186.040

Force speed oil canMetal with black laquer

Part nr.

052.117

Rubber grease

A quality product for greasing all

rubber, especially brakes & clutch

Form -A- Gasket nr. 1372, 200 ml gasket cement tube. Use on both sides of a gasket or direct on the surface. Specially for high temperatures up to 315°C. Also usefull for exhaust pipefitting.

Brake fluids, greases & allround cleaning products

177© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Part nr.

186.084

Part nr.

186.087

Castrol windscreen cleaner and

anti-frost 0,5 L.

Tube glue gelThis tube of all purpose glue is perfect for sticking small trim parts.

Glue sprayThis strong spray glue can be used for all purposes.

Wax Oyl Anti-Corrosion2.5L Starter kit

2.5 L. Wax Oyl refill can

400ml Spray

“Fertan” rust killerPumpspray, 250ml

Glue gel, pot 625 gr.This very strong all purpose glue is perfect for sticking panels, carpets and other trim parts.

RAIN-X Raindrops just blow off, keeps windscreen clear even without windscreen wipers. Doesn’t smear or damage

Part nr.

185.040

Part nr.

186.080

Part nr.

186.151

Part nr.

187.011

Part nr.

187.009

Part nr.

187.010

Part nr.

198.034

Car protection products & glues

© V a n G e s t e l B & C 2 0 0 2

178 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Partn°

159.519159.520159.521150.874

Description Sizes

Jaguar XK 452 CMJaguar MKII 488 CMJaguar XJ 515 CM MINI

Outdoor car covers - Moltex

Will fit all TR’s, MGA, MGB, MGC, Spitfire, Sprite & Midget and

Austin Healey 100/4, 100/6 & 3000and other sportscars up to 410cm long

Will fit T-Types and every car with max length 382 cm and max width 163 cm

Indoor deluxe car covers

Universal green indoor car coverMade from 100% pure cotton, the inside has been brushed to givea soft flanel appearance. Although the material has been pre-washed,we recommend washing in cold water and soft soap. Will fit AH, TR3-6, MGB, MGC and other sportscars up to 410cm long

Moltex car covers are made from strong lightweight breathable waterproof material. Whether you are looking for an in-door car cover, or a way to keep the sun off your car during the day, or an all season outdoor car cover, a Moltex car cover is the best solution. These universal car covers come with a stowage bag and two elasticated ropes with four hooks to keep the cover securely in place. Make sure the cover doesn’t move because of wind. Tighten with additional ropes or elastics to avoid the car cover making matt areas through friction!

Custom made car cover. Made from thick acrylic-cotton fleece. This car cover is very soft inside and elasticated to ensure a perfect fit. Green with yellow piping.

For indoor use only. Comes with stowage bag.

Part nr.

159.322

Part nr.

159.359

Part nr.

159.323

Wing cover TRPadded vinyl wing cover specially made for your TR6

In-outdoor car covers and wing protectors

Partn° Description

150.436 TR2 - 3A 150.437 TR4 - 5 150.438 TR6 150.439 TR7 150.441 Spitfire MKI,II,III 150.442 SPITFIRE MKIV, 1500 150.448 A.H. Sprite MKI 150.449 A.H. Sprite MKII, III

Partn° Description

159.142 A.H. 100/4, 100/6 & 3000 150.443 MGTA - TC 150.444 MGTD - TF 150.445 MGA 150.446 MGB - MGC 150.447 MGB GT - MGC GT 150.449 MG Midget 159.146 MGF159.343 Jaguar XK

Partn°

159.516159.517159.518

Description

Jaguar XK Jaguar MKIIJaguar XJ

* Superior water resistance* Protects from dust* Protects from pollution* Keeps interior cooler* Protects from bird & tree droppings* Elasticized edge for snug fit* Light and easy to use* Washable by hand and by machine ( +40°)

Part nr.

159.300

179© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Part nr.

162.507

Screw set, 5/16 UNFSet of 40 pieces: 10 screws, 10 nuts,

10 plain washers & 10 spring washers

Set of black panel screws & cupsSet of 50 pieces: 25 screws & 25 cups

Screw set, UNF• 3/16”, 1/4”, 5/16”Set of 160 pieces: 40 screws, 40 nuts, 40 plain washers & 40 spring washers

Screw set, 3/16Set of 40 pieces: 10 screws, 10 nuts,

10 plain washers & 10 spring washers

Set of screws & nutsSet of 20 pieces: 10 screws & 10 nuts 6-32 UNC

Set of chrome panel screws & cups

Set of 120 pieces: 60 screws & 60 cups

10-325/16” 1/4”

Part nr.

135.629

Part nr.

162.762Part nr.

162.156

Part nr.

152.110

Part nr.

152.049

screw kits

© V a n G e s t e l B & C 2 0 0 2

180 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

“Midlock”AdaptorSU 1” 3/4

Part nr.

200.682

Set of tools to tune up your SUThis kit includes a mixture test gauge, rods to set the float level, jet wrench, a jet centering tool and instructions.

Exhaust gas analyzerTune your engine to peak performance with this quality gas analyzer

Pair of “Midlock” carburettor testersComes complete with a universal adaptor

Colortune from GunsonWith it’s glass top spark plug you can observe the colour of the combustion in the chamber

“Lucas”combination toolDistributor screwdriver, feeler for contact points & spark plug adjuster

Part nr.

102.217

Part nr.

200.573

Part nr.

102.302

SU toolJet adjusting spanner

SU tool3 pieces

Part nr.

200.652

Part nr.

200.679

Part nr.

200.750

Carburettor synchronizer

Part nr.

200.572

Tools

Part nr.

200.748

181© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Spark plug socket With insulated T-handle

Part nr.

200.452

Valve spring lifter

Oil filter remover

Bending toolThe best tool for bending your brake pipe set etc.

10 blade imperial gauge Contents: 1 1/2, 2, 3, 4, 6, 8, 10, 12, 15 and 25 thousand. 4” long taper blades hardened and polished for long life.

Clik-adjustThis micrometertappet

adjuster makes your life easier.

Valve grinding paste

Valve grinding stickComes with coarse & fine grinding paste

Piston ring compressor

Made of spring steel, stepless adjustment

C/W hex. key wrench

Universal ball joint seperator

Part nr.

200.438

Part nr.

200.450

Part nr.

200.390

Part nr.

200.711

Part nr.

200.449Part nr.

200.805

Part nr.

200.747

Part nr.

200.446

Part nr.

200.453

Oil service spanner

Part nr.

053.176

Vizibleed bleederEasy bleeding of brakes & clutch

Part nr.

200.617

Clutch centering tool

Part nr.

200.737

Tools

© V a n G e s t e l B & C 2 0 0 2

182 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Revolving punch pliers

Car circuit testerEspecially for car electrice. Comes with pointed probe, cap cover, connecting lead & alligator clip

Octagonal spanner

This is a superior tool when it comes to removing octagonal spinners

Punch & bed kit

This is a superior tool when it comes to removing spinners

Wire stripping pliersBrass setting screw & locknut coil spring for wires up to 5 mm

British wheel wrenches

Part nr.

185.019

Part nr.

200.419

Part nr.

200.439

Part nr.

200.391

Part nr.

185.678

Part nr.

200.418

Part nr.

133.141

Part nr.

042.097

Hammer (1.15 Kg)Made from copper & rawhide

Wooden spinner remover

Wire brush

Part nr.

136.055

Part nr.

136.056

Protective cover for spinner

wrenches

Part nr.

159.059

Wire wheel brush

Part nr.

185.050

Spoke spanner tool

Part nr.

200.674

Tools

Part nr.

200.702

Tyre pressure gauge

183© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Thread restoring fileThis most usefull tool will repair damaged or rusty threads in difficult place.

Economical sliding gaugeGauge for measuring components, metric and imperial.

Part nr.

200.806

Part nr.

200.464

Spotwell millWith interchangeable mill (10 mm dia.) & adjustable mill depth

Spare mill

High quality open spanner set

1/4” to 1 1/4”, 8 pieces

17 Piece set of expert quality AF socketsSet of 1/2” square drive 12 point sockets manufactured from chrome vanadium steel. Hardened, tempered, chrome plated and polished for corrosion protection. Contents: 5/16, 3/8, 7/16, 1/2, 9/16, 5/8, 11/16, 3/4, 13/16, 7/8, 15/16, 1.1/16, 1.1/8, 1.3/16, 1.1/4 and 1.5/16” AF.

Spotwell mills

Part nr.

200.588

Part nr.

200.002

Part nr.

200.800

High quality robust rivet tool

T-type ratchet tapwrench

Part nr.

200.434

Part nr.

200.435

Precision ruleMade from hardended stainless

steel with a clear graduation in Inches & cm

Part nr.

200.442

Tools

Partn°

200.458200.459

Description

Cap. hand taps 1/8” up to 1/4”Cap. hand taps 1/4” up to 1/2”

Partn°

200.436200.437

Description

7mm diameter8mm diameter

Part nr.

200.868

Tap & Die set17 pieces, 1/4”, 5/16”,

3/8”, 7/16”, 1/2”

High quality combination spanners7/16” to 7/8”, 10 pieces

Part nr.

200.047

POZIDRIVPOZIDRIV Chrome alloy steel screwdriversPartn°

200.352200.353

Description

N°2N°3

© V a n G e s t e l B & C 2 0 0 2

184 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

SU carburettors: tuning, tips and techniquesMost mechanics and enthusiasts struggle with setting the twin SU carburetters correctly. This book and a bit of practice will solve the problem. It is very important for your engine that the carburettor tuning is correct. This book also covers all SU Fuel pumps.

Weber & Dellorto How to build & power tune Weber & Dellorto DCOE & DHLA carburetters All you could want to know about the world’s most famous and popular side-draught carburetors. Strip & rebuild, tuning, jetting, choke sizes and an application formula gives the right set-up for your MG. 96 pages, over 100 photographs and line illustrations.

Haynes Techbook: Weber, Stromberg & SU carburettors

This is one of the most complete books on carburettors. Theory & operation is explained in great detail with photo’s & illustrations.

With detailed overhaul procedures, maintenance and tune-up info. Also with application & reference tables .

Part nr.

190.428

Part nr.

190.225

Part nr.

190.416

Part nr.

190.095TR5-250 Parts catalogue• 190.093 270x200MM, 259 pages with B&W illustrations• 190.094 270x200MM, with B&W illustrations

TR6 1969-74 parts catalogue292x212MM, 320 pages, B&W ill.

Part nr.

190.096 TR6 1974-76 parts catalogue.

Part nr.

190.085 TR5-250 Workshop manual. 272x200MM, B&W ill.

Part nr.

190.104 Haynes Workshop Manual270x210MM, 240 pages B&W ill.

Books

Official workshop manuals• 190.087 English• 190.238 Dutch• 190.538 French• 190.474 Italian

185© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Part nr.

190.674

Part nr.

190.224

Part nr.

190.148

Part nr.

190.587

How to restore TR5-6(by Roger Williams)Complete guide to all aspects of restoration including chassis, body, engine & gearbox (transmission), suspension & steering, brakes, electrical equipment, interior & hood (soft top), painting & plating270x208MM, 192 pages with B&W illustrations

How to build + power tune SU carburettors(by Des Hammill)

This book gives you an expert advice on how to build & modify SU carburettors to suit any four-stroke application, including high performance road cars and racing cars. Includes needle reprofiling. 250x207MM, 64 pages with B&W illustrations

Part nr.

190.609

Part nr.

190.145

Triumph cars in America(by Michael Cook)A remarkable detailed and personal journal of the rise & fall of Triumph automobile sales in America. This well-documented story covers all of the favorite, as well as lesser-known, Triumph models including all of the TR’s from 1 to 8 , etc.270x210MM, 192 pages with B&W illustrations

The Triumph TR’s(by Graham Robson)Written by carefully chosen authors, designed to a uniform format, extensively illustrated, packed with deeply researched reference material and produced as a high quality and conveniently-sized package. This is a must for collectors, owners & enthusiasts. 235x186MM, 128 pages with B&W illustrations

Illustrated Triumph Buyer’s guide

(by Richard Newton)Includes pre-and postwar

saloons and Roadsters and the Triumph factory race cars. More than 200 photo’s and a

treasure trove of details, specifications and the exclusive

five-star investment ranking. 233x286MM, 176 pages with

+200 B&W illustrations

Essential Triumph TR TR2-TR8

(by David Hodges)All the essential facts about TR’s. History, description and analysis

of each model. Specifications performance data and production

figures. 260x210MM, 79 pages with

120 photo’s, 60 in colour

Books

© V a n G e s t e l B & C 2 0 0 2

186 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Part nr.

190.249Part nr.

190.250

Part nr.

190.251

Part nr.

190.253

Part nr.

190.252

Triumph 250 handbookIncludes controls, instruments and indicators, safety harness, seats, locks & keys, soft top, care of bodywork, wheels & tyres, cooling system, electrical system, routine service and much more.210x140MM, 71 pages with B&W illustrations

Triumph TR6 PI 1973 on handbookIncludes controls, instruments and indicators, safety harness, heating and ventilation system, running instructions, wheels & tyres, cooling system, maintenance service and much more210x140MM, 59 pages with B&W illustrations

Triumph TR6 up to 1973 handbookIncludes controls, instruments and indicators, safety harness, seats, locks & keys, soft top, care of bodywork, wheels & tyres, cooling system, electrical system, routine service and much more.216x140MM, 71 pages with B&W illustrations

Triumph TR6 USA 1972 handbookIncludes controls, instruments and indicators, safety harness, seats, locks & keys, soft top, care of bodywork, wheels & tyres, cooling system, electrical system, maintenance service and much more.215x140MM, 77 pages with B&W illustrations

Triumph TR6 USA 1975 handbookIncludes controls, instruments and indicators, safety harness, seats, locks & keys, soft top, care of bodywork, wheels & tyres, cooling system, electrical system, routine service and much more.216x140MM, 71 pages with B&W illustrations

Books

187© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Original seriesFor correct and precise information on definitive factory specififcations in every detail, from chrome trim to plug leads, there’s no better place to look than these books. Whether owner, buyer, restorer or enthusiast, you’ll find a combination of minutely researched text and magnificent full-colour photographs - all specially commissioned - to tell you what you need to know. Hailed by magazine reviewers worldwide. The ‘Original’ series is the works.

Jaguar XK Jaguar E-Type Jaguar XJ

Sprite & Midget MG T series MGA MGB & MGC

Mini Cooper & Mini Cooper S

Triumph TR2-3A Triumph TR4-6 Austin Healey

PewterThis model cars is 7 cm long and made from silvered tin. The scale car is fixed on a

solid oval wooden base with a silvered nameplate at the front. Very nice indeed.

Moris Minor TR 7

Part nr.

190.560Part nr.

190.561Part nr.

190.562

Part nr.

190.220Part nr.

190.057Part nr.

190.175Part nr.

190.223

Part nr.

190.198Part nr.

190.527Part nr.

190.536Part nr.

190.193

Part nr.

190.531Part nr.

190.570

Part nr.

195.107 Triumph TR6 model

The “Original Series”

© V a n G e s t e l B & C 2 0 0 2

188 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Easy ordering

How to find us

© V a n G e s t e l B & C 2 0 0 2

190 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Notes

191© V a n G e s t e l B & C 2 0 0 2

TR250 ’67-’68 TR6 CARB ’69 TR6 CARB ’70 TR6 CARB ’71 TR6 CARB ’72 TR6 CARB ’73 TR6 CARB ’74 TR6 CARB ’75 TR6 CARB ’76 CD1 on CC25003 on CC50001 on CC60903 on CC75001 on CF1 on CF17002 on CF27001 on CF50001 on Carburettor Cars USA

Orderform

ANGLO PARTS FAX ORDERFORM

Quantity Part n° Page n° Illustr. n° Description

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

16

17

18

19

20

Client n° : Date :

Name : Shipping address if different :

Address :

Country : Country :

Tel/Fax :

E-mail :

To be shipped Will be collected Backorders, parts not in stock or available at this moment/ required or not

Q u a l i t y P a r t s & S e r v i c e

Payment : Visa Euro-card - Master card - Access

Card n°. :

Exp. date : badge code : Signature :

Model : Year :Chassis n° :Engine n° :

Fax numbersBELGIUM Fax +32 15 42 34 45 • NETHERLANDS, BOVEN-LEEUWEN Fax +31 318-551395 ITALY Fax +39 0422 321 470 GERMANY Fax +49 6441 781336 • FRANCE Fax +33 328 26 83 73NETHERLANDS, GRUBBENVORST Fax +31 318-551395 • SPAIN Fax +34 93 225 27 91 LUXEMBOURG Fax +352 518151-820 • HUNGARY Fax +36 1 254 08 08CZECH & SLOVAK REPUBLIC Fax: +42(0) 383 382 161

© V a n G e s t e l B & C 2 0 0 2

192 TR5 ’67-’68 TR6 PI ’69 TR6 PI ’70 TR6 PI ’71 TR6 PI ’72 TR6 PI ’73 TR6 PI ’74 PI CARS CP25156 on CP50001 on CP52786 on CP75001 on CR169 on CR5049 on CP2 on

Notes

© A n g l o P a r t s n v 2 0 1 6 Q u a l i t y P a r t s & S e r v i c e

DOWNLOAD OUR OTHER ANGLO PARTS & ACCESSORIES CATALOGUES FOR FREE!d o w n l o a d t h e p d f v e r s i o n s o f o u r c a t a l o g u e s f o r f r e e a t w w w. a n g l o p a r t s . c o m o r b u y t h e m f o r 1 0 e u r o s p e r i t e m .

Triumph TR2-4Apart n° 190.243

Triumph Spitfirepart n° 190.133

Triumph TR5-250-6part n° 190.273

Mini 1969-2000part n° 190.720

Morris Minorpart n° 190.718

Land Rover Defender 90-110 1984-2006

part n° 190.779

A.H. 100/4-3000part n° 190.509

Sprite-Midget 1965-’80 part n° 190.518

Sprite-Midget 1958-’64 part n° 190.504

Triumph GT6part n° 190.863

Jaguar XJ, Series I, II, IIIpart n° 190.780 British Parts, Tools & Accessories

part n° 190.058

Jaguar XK120-150part n° 190.694

Jaguar MKII-Daimler V8part n° 190.721

Jaguar E-typepart n° 190.695

MGTC part n° 190.275

MGTD-TF part n° 190.067

MGA part n° 190.001 MGB

part n° 190.002

MGCpart n° 190.158

MGF-TF 1996-2005part n° 190.519

www.angloparts.complease visit our website for all contact information

Anglo Parts ShopsMAIN BRANCH BELGIUMNETHERLANDS • ITALY • GERMANY

Authorized Anglo Parts DealersFRANCE • NETHERLANDS • SPAINSWEDEN • FINLAND • SWITZERLANDCZECH REPUBLIC • SLOVAKIALUXEMBOURG • POLAND • HUNGARY

F o u r t h E d i t i o n • 19 0 . 2 7 3 Q u a l i t y P a r t s & S e r v i c e

TRIUMPH TR5-250-61967-1976PARTS & ACCESSORIES CATALOGUE