TRUCK MIXERSTruck-Mounted Conventional

& Booster Concrete Mixers

Wherever concrete is produced and moved is where you will find Schwing-Stetter machinery.

With plants in Germany, Austria, USA, Brazil, Russia, China and India as well as with more than 100 sales and service facilities,

the group of companies is always close to the customer.

Our wide range of products with something for every application is what makes Schwing-Stetter the No. 1 system supplier for

concrete machinery worldwide.

CONCRETE BATCHING PLANTS

TRUCK MIXERS

TRUCK-MOUNTED CONCRETE PUMPS

STATIONARY CONCRETE PUMPS

SEPARATE PLACING BOOMS

CONCRETE RECYCLERS

SCHWING-STETTER MOVES CONCRETE. WORLDWIDE.

BUILDING A BETTER MIXERIt started 75 years ago with the original Stetter mixer company and today since the merger with Schwing the result is the

largest mixer company in the world. Today well known Schwing craftsmanship is applied to every mixer at one of our worldwide

plants where certified welders and assemblers form and shape the products from raw materials chosen and inspected for their

durability. Attention to detail means drum trueness within .125 of an inch that translates to balanced operation, smoothness and

long wear life.

Our low profile design results in the fastest charging mixer and a smooth discharge ideal for flatout paving or low slump

controlled discharge slipforming. Drivers report they can feel the difference of our design with 13% lower center of gravity. You’ll

feel the difference too when you realize the benefits of this competitively priced mixer like faster load cycling, more deliveries per

day and the longevity of Schwing-Stetter products.

Come visit our factory and see the pride we put into every truck mixer or request a demonstration and hear the comments from

your drivers. The Stetter tradition is alive and thriving at Schwing – building better products for ready-mix producers.

The Schwing-Stetter drum charges quicker than any other drum because the rear section of the drum widens quicker

to allow for quicker flow into the widest part of the drum. The longer design of the front section of the drum also helps

achieve the lowest center of gravity in the industry.

BOOSTER:Booster models in 10, 10.5, 11 and 12 yd3 capacities.

CONVENTIONAL:Conventional models in 10, 10.5, 11 and 12 yd3 capacities.

2 / 3

13% Lower Center of Gravity

Charging hopper measures 44.5” x 28.5” with 30” throat for smooth charging. Optional tilt-up hopper available.

BOOSTER SERIES

Durability and design features appreciated by the thousands of Schwing-Stetter owners are the result of more than 50 years of

refinement, including:

• 8-inch diameter hardened rollers with Timken™ bearings

• Standard remote central greasing

• 1⁄4-inch abrasion-resistant steel head and blades

• 3/16-inch abrasion resistant steel shell

• Low profile shape for fast charging, mixing & discharging

• Fast adjusting booster control with in-cab gauge

• Two-stage ZF 7000 gear box drive

• Huck bolt mounted subframe

• Axle pressurizing cylinder with internal accumulator

• Polyurethane two-part top coat

Seven position chute positioning with positive lock and central greasing of dual Timken™ bearings. Standard 5’6” chute with 3’2” fold over. Additional 4’ chute is frame mounted.

Booster axle is equipped with hydraulic cylinder with internal accumulator eliminating excess hoses and fittings. Adjustable settings to meet both federal and state highway limits.

4 / 5

Wireless control utilizes in-cab charging station. Display provides control of drum, chute lock, tilt hopper, work lights and booster axle.

Lowest Profile Design.

CONVENTIONAL SERIES

Experience the design that provides stability you can feel.

Here are the mixers that provide stability you can feel which translates to more comfortable drivers and better productivity.

Another benefit is the smooth discharge, even with low slump curb mixes. Other features, include:

• 20% larger discharge hopper and better flow

• Rear pendant control with 25’ hard wire control

• Full width steel or aluminum fenders

• 125 gallon stainless steel pressurized water tank

• Eaton variable displacement piston pumps

• Single or double 18 x 24 inch hatch or a round quick open hatch

• Standard mechanical or optional electronic controls

Rear ladder folds down and angles out for easy ascent. Water plumbed to upper wash station and ground level with diversion valve.

Large hydraulic reservoir with sight glass. All fluid is filtered through 10 micron filter and rugged oil cooler with electric fan mounted over the gear case.

6 / 7

Gain control of drum rpm with the new SMART Drum option from Schwing-Stetter. The benefits of a constant speed drum are

combined with an innovative control system to optimize drum rpm...automatically. No need to remind drivers to set a constant

speed - SMART Drum does it for you by making drum rpm independent of engine rpm. When your driver accelerates past thresh-

old speed, SMART Drum takes over and the drum speed is held constant. If for some reason the driver overrides the Smart Drum

controls, a record is saved for future analysis. Surveys in six regional markets show that the average drum speed is 6 rpm – well

above the optimum. Using industry trip and distance averages, SMART Drum extends the life of the drum more than 50 percent.

Because drum speed is held constant the mix quality improves. And low drum rpm keeps the center of gravity constant for

stability you can feel. Enjoy less horsepower draw and fuel savings from fewer drum rotations and you can see how SMART Drum

from Schwing-Stetter improves your bottom line every day. See the SMART Drum on SchwingTV at www.schwing.com.

50% LESS DRUM WEAR AUTOMATICALLY

8 / 9

THE STORYMixer Industry Cycle Numbers Controls Industry AverageLoading at Plant (2 min. @ 18 RPM) 36 36

Mixing (3 min. @ 16 RPM) 48 48

Travel Time (30 min. @ Avg. Drum RPM) 30 90

Discharge Revolutions 36 36

Return Travel (1/3 of the trips include returned concrete) 10 30

Total Drum Revolutions 160 240

Daily CycleTrips per Day 4 4

Total Drum Revolutions per Day 640 960

Drum Revolutions Saved Per Day with Smart Drum 320

The StoryTotal Rev per Year (600 Rev per Day x 200 Operating Days) 128,000 192,000

Total Revs Saved per Year with Smart Drum 64,000

Total Revs in 5.6 Years 716,800 1,075,200

Total Revs Saved with Smart Drum (Over 5.6 Years) 358,400Extended Drum Life (Years) with Smart Drum 2.80

Total Drum Life with Smart Drum 8.40Drum Replacement $10,000 $10,000

Yearly Cost for Drum Replacement $1,190 $1,786

Cost Saving per Year $595.00

Cumulative Savings Over 8.4 Years $5000Percent Drum Life Extended 50%Savings per Cubic Yard $0.09

SUPPORTING DATA:• Average Drum Life (Cubic Yards) 36,840• Average Drum Life (Years) 5.6• Average Load Size (Cubic Yards) 8.2

• Average Yards per Year 6,579• Average Loads per Year 802• Average Trips per Day 4.0

• Operating Days per Year 200

Estimates only, subject to change.

50% LESS DRUM WEAR AUTOMATICALLY

Where quality comes first.

SCHWING-STETTER - TRUCK MIXERS

10 / 11

SCHWING-STETTER THE WORLDWIDE CHOICE.

5900 Centerville Road | St. Paul, MN 55127 | TEL 1-888-SCHWING

FAX 651-429-3464 | www.schwing.com

1/15 - 2M

Wherever your construction project takes you, the Schwing Group provides sales, service and parts support. From our headquarters in Herne, Germany, the Schwing commitment to support our customers’ success spreads globally through a growing network of manufacturing plants in Germany, Austria, USA, Brazil, Russia, China

and India. We also support sales and service centers in France, the Netherlands, Austria, the Czech Republic, Sweden and Korea as well as representation in more than 100 countries worldwide. Visit www.schwing.com to find the Schwing facility or dealer nearest your future or current project.