Upload
others
View
18
Download
1
Embed Size (px)
Citation preview
Machine tools / Power tools
Laser technology / Electronics
Training
TRUMPF Laser Schram-berg
The course program
January to June 2018
2
Preface
Training provides security
With your TRUMPF laser you have acquired an excellent high-tech system. Whatever the task
- welding, cutting, labeling or using the tool for other jobs: The respective machining pro-
cess always requires exact compliance with all parameters involved in the process. This is
true for clamping and positioning as well as for the laser tool itself.
In the training courses at our Schramberg training center you get to know your laser and its
functions in detail. The training makes you more assured in your daily work and ensures
that you can utilize the full potential of your laser.
Furthermore, our online support can be ideally combined with a training and up to 80% of
all faults are immediately remedied. With our safety-certified online support we offer you a
worldwide unique service. Once our specialists have been enabled online, they can monitor
and control all functions of the laser, diagnose errors and generally remedy these errors. Idle
times and service missions on site are thus reduced to a minimum.
3
Our know-how is your gain
Our trainings are aimed mainly at employees who work with the laser system or are respon-
sible for maintenance and repair. Experienced service technicians and specialists from our
development department pass on their in-depth know-how tailored to the requirements of
the participants.
The training participants get to know the structure and the function of their laser system.
Maintenance and error detection and elimination are practiced. The focus is hereby on the
device technology. The basic theory of laser application is communicated and practical
exercises are carried out. Special application trainings are offered separately.
Course information and dates Duration Language CW from to
Operator course
TruDisk 1 – 16 kW (4 C) 3 days German 4 2018-01-22 2018-01-24
TruDisk 1 – 16 kW (6 C to 2 CW) 3 days German 18 2018-05-02 2018-05-04
TruDisk 1 – 16 kW (6C as of 2 CW) 3 days German 11 2018-03-12 2018-03-14
TruDisk 1 – 16 kW (FD27) 3 days German 22 2018-05-28 2018-05-30
4
TruDisk 1 - 16 kW
For disk lasers of series TruDisk 1 to 16 kW (4C, 6C to 2 kW, 6C as of 2 CW, FD27) we offer the following trainings:
This training is aimed at whoever works with the laser system and carries out operations such as operation, programming and parame-terization, setup work and simple mechanical maintenance work. General technical knowled-ge is an advantage for the training participants.
Course duration: 3 days
Operator course
5
TruDisk1 - 2 kW (6C)
We offer the following trainings for disk lasers of the series TruDisk 1 to 2 kW (6C):
This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integration, pro-gramming or setup work. General electrical en-gineering knowledge is an advantage for the trai-ning participants.
Course duration: 4 daysMat. no.: 1976619
Maintenance course Follow-on course
Operator course PFO
Course duration: 1 dayMat. no.: 2269602
Course information and dates Duration Language CW from to
Maintenance course
TruDisk 1 – 2 kW (6 C) 4 days German 5 2018-01-29 2018-02-01
Operator course PFO 1 day German 5 2018-02-02 2018-02-02
Maintenance course
TruDisk 1 – 2 kW (6 C) 4 days English 25 2018-06-18 2018-06-21
PFO operator course 1 day English 25 2018-06-22 2018-06-22
Follow-up course
Operator course PFO
Course duration: 1 dayMat. no.: 2269602
6
TruDisk 3 - 12 kW (6 C)
We offer the following trainings for disk lasers of the series TruDisk 3 to 12 kW (6C):
This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integrati-on, programming or setup work. General elec-trical engineering knowledge is an advantage for the training participants.
Course duration: 4 daysMat. no.: 1976619
Maintenance course
Course information and dates Duration Language CW from to
Maintenance course
TruDisk 3 – 12 kW (6 C) 4 days German 3 2018-01-15 2018-01-18
Operator course PFO 1 day German 3 2018-01-19 2018-01-19
TruDisk 3 – 12 kW (6 C) 4 days German 8 2018-02-19 2018-02-22
Operator course PFO 1 day German 8 2018-02-23 2018-02-23
TruDisk 3 – 12 kW (6 C) 4 days German 15 2018-04-09 2018-04-12
Operator course PFO 1 day German 15 2018-04-13 2018-04-13
TruDisk 3 – 12 kW (6 C) 4 days German 20 2018-05-14 2018-05-17
Operator course PFO 1 day German 20 2018-05-18 2018-05-18
Maintenance course
TruDisk 3 – 12 kW (6 C) 4 days English 12 2018-03-19 2018-03-22
Operator course PFO 1 day English 12 2018-03-23 2018-03-23
TruDisk 3 – 12 kW (6 C) 4 days English 24 2018-06-11 2018-06-14
Operator course PFO 1 day English 24 2018-06-15 2018-06-15
7
8
TruDisk 1 – 6 kW (FD27)
We offer the following trainings for disk lasers of the TruDisk 1 to 6 kW series (FD27):
This training is aimed whoever works with the laser system and carries out operations such as maintenance and repair, laser integration, pro-gramming or setup work. General electrical en-gineering knowledge is an advantage for the training participants.
Course duration: 4 daysMat. no.: 2617952
Maintenance course Follow-up course
Operator course PFO
Course duration: 1 dayMat. no.: 2269602
Course information and dates Duration Language CW from to
Maintenance course
TruDisk 1 – 6 kW (FD27) 4 days German 6 2018-02-05 2018-02-08
Operator course PFO 1 day German 6 2018-02-09 2018-02-09
TruDisk 1 – 6 kW (FD27) 4 days German 20 2018-05-14 2018-05-17
Operator course PFO 1 day German 20 2018-05-18 2018-05-18
TruDisk 1 – 6 kW (FD27)
9
PFO introduction - p.16
10
Course information and dates Duration Language CW from to
Maintenance course
TruDisk Pulse series 4 days German 12 2018-03-19 2018-03-22
Operator course PFO 1 day German 12 2018-03-23 2018-03-23
TruDisk Pulse series 4 days German 24 2018-06-11 2018-06-14
PFO operator course 1 day German 24 2018-06-15 2018-06-15
TruDisk Pulse series
We offer the following trainings for the TruDisk Pulse series:
This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integration, pro-gramming or setup work. General electrical en-gineering knowledge is an advantage for the trai-ning participants.
Course duration: 3 days
Note: Dates for holding an operator training are availa-ble on request and are tailored to the individual requirements of our customers.
Maintenance course Follow-up course
PFO operator course
Course duration: 1 dayMat. no.: 2269602
11
TruPulse21 - 556
Course information and dates Duration Language CW from to
Operator course
TruPulse 21-556 3 days German 9 2018-02-27 2018-03-01
PFO operator course 1 day German 9 2018-03-02 2018-03-02
TruPulse 21-556 3 days German 20 2018-05-15 2018-05-17
PFO operator course 1 day German 20 2018-05-18 2018-05-18
We offer the following courses for pulsed laser devices of the TruPulse 21–556 series:
This training is aimed at all persons who work with the laser system and carry out activities such as operation, programming and parame-terization, setup work and simple mechanical maintenance work. General technical knowled-ge is an advantage for the training participants.
Course duration: 3 daysMat. no.: 1844832
Operator course Follow-up course
PFO operator course
Course duration: 1 dayMat. no.: 2269602
12
TruDiode
We offer the following trainings for the series TruDiode to 1 kW and 2 - 6 kW:
This training is aimed at all persons who work with the laser system and carry out activities such as operation, programming and parame-terization, setup work and simple mechanical maintenance work. General technical knowled-ge is an advantage for the training participants.
Course duration: 3 daysMat. no.: 1976219
PFO 20-2 PO with temperature control - p.13
Operator courseTruDiode to 1 kW
This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integrati-on, programming or setup work. General elec-trical engineering knowledge is an advantage for the training participants.
Course duration: 4 daysMat. no.: 1976220
Note: Dates for holding these trainings are avai-lable on request.
Maintenance course TruDiode 2 - 6 kW
Follow-up course
Programming course PFO 20-2 PO with Temperature control
Course duration: 2 daysMat. no.: 2050325
Course information and da- Duration Language CW from to
Operator course
TruDiode to 1 KW 3 days German 23 2018-06-04 2018-06-06
PFO 20-2 PO with TR 2 days German 23 2018-06-07 2018-06-08
Operator course
TruDiode to 1 KW 3 days English 10 2018-03-05 2018-03-07
PFO 20-2 PO with TR 2 days English 10 2018-06-08 2018-06-09
Maintenance course
TruDiode 2 - 6 KW 4 days German On request
13
14
TruMicro 2000
We offer the following trainings for the TruMicro 2000 ultra-short-pulse laser:
Course information and dates Duration Language CW from to
Operator course
TruMicro 2000 3 days German 18 2018-05-02 2018-05-04
This training is aimed at whoever works with the laser system and carries out operations such as operation, programming and parame-terization, setup work and simple mechanical maintenance work. General technical knowled-ge is an advantage for the training participants.
Course duration: 3 daysMat. no.: 2050327
Operator course
15
TruMicro 5000 Com-pact
Course information and da- Duration Language CW from to
Maintenance course
TruMicro 5000 Compact 3 days German 10 2018-03-06 2018-03-08
We offer trainings for the TruMicro 5000 ultra-short-pulse laser:
This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integrati-on, programming or setup work. General elec-trical engineering knowledge is an advantage for the training participants.
Course duration: 4 daysMat. no.: 1844843
Maintenance course
We offer the following trainings for the TruMicro 2000 ultra-short-pulse laser:
16
Course information and dates Duration Language CW from to
Maintenance course
TruMicro 5370/5380 3 days German 12 2018-03-21 2018-03-23
We offer the following training for the TruMicro 5370/5380 ult-ra-short-pulse laser:
This training is aimed at all persons who work with the laser system and carry out activities such as maintenance and repair, laser integrati-on, programming or setup work. General elec-trical engineering knowledge is an advantage for the training participants.
Course duration: 3 days
Maintenance course
TruMicro 5370/5380
17
TruMicro 7370/7380
We offer the following trainings for the TruMicro 7370/7380 ult-ra-short-pulse laser:
Course information and dates Duration Language CW from to
Maintenance course
TruMicro 7370/7380 3 days German 16 2018-04-18 2018-04-20
This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integrati-on, programming or setup work. General elec-trical engineering knowledge is an advantage for the training participants.
Course duration: 3 days
Maintenance course
We offer the following training for the TruMicro 7050/7060/7240 ult-ra-short-pulse laser series:
This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integrati-on, programming or setup work. General elec-trical engineering knowledge is an advantage for the training participants.
Course duration: 3 daysMat. no.: 1976232
Maintenance course
Course information and dates Duration Language CW from to
Maintenance course
TruMicro 7050/7060/7240 3 days German 15 2018-04-09 2018-04-11
Maintenance course
TruMicro 7050/7060/7240 3 days English 3 2018-01-20 2018-01-22
18
TruMicro 7050/7060/7240
TruFiber 200 - 500
We offer the following training for the TruFiber 200 - 500 fiber laser se-ries:
This training is aimed at whoever works with the laser system and carries out operations such as maintenance and repair, laser integrati-on, programming or setup work. General elec-trical engineering knowledge is an advantage for the training participants.
Course duration: 3 daysMat. no.: 1976231
Note: Dates for holding these trainings are avai-lable on request.
Maintenance course
Course information and dates Duration Language CW from to
Maintenance course
TruFiber 200 - 500 3 days German On request
TruFiber 200 - 500 3 days English On request
19
20
TruLaser Station 5005
Course information and dates Duration Language CW from to
Operator course
TruLaser Station 5005 3 days German 2 2018-01-10 2018-01-12
TruLaser Station 5005 3 days German 14 2018-04-04 2018-04-06
TruLaser Station 5005 3 days German 26 2018-06-27 2018-06-29
Operator course
TruLaser Station 5005 3 days English 8 2018-02-21 2018-02-23
TruLaser Station 5005 3 days English 20 2018-05-16 2018-05-18
This trainings is aimed at whoever carries out welding applications on the laser system or tasks such as programming and setup work. General technical knowledge is an advantage for the training participants.
Course duration: 3 daysMat. no.: 1866633
Operator course for TruLaser Station 5005
We offer the following training for the Trulaser Station 5005 laser sys-tem:
Follow-up courses
Vision Line Detect - BasicCourse duration: 2 days
Vision Line Detect - Systems Course duration: 1 day
21
22
Vision Line
Vision Line Detect - Basic Vision Line Detect - Systems
This course is aimed at whoever wants to acqui-re basic knowledge of integrating image pro-cessing programs into their production process.
Course duration: 2 daysMat. no.: 2050328
Note: A basic knowledge of operating a laser device with TruControl 1000 and knowledge of operating a PFO is required to participate.
The course is carried out on a PFO with exercise sections of the training center.
We offer the following training for Vision Line:
This course is aimed at whoever wants to acqui-re expertise in safely working with the Vision LIne software in connection with the 3D TRUMPF machines, as well as practical creation and customization of programs.
Course duration: 1 dayMat. no.: 2269762
Note: Participation in the Vision Line Detect basic course and in the operator course of the respective TRUMPF machine (e.g. TruLaser Sta-tion 5005) is required to participate.
Prior knowledge of CNC variable programming is necessary.
The course is generally carried on a TruLaser Station 5005 with exercise sections of the trai-ning center.
23
Course information and dates Duration Language CW from to
Basic course
Vision Line Detect - Basic 2 days German 6 2018-02-05 2018-02-06
Vision Line Detect - Basic 2 days German 20 2018-05-14 2018-05-15
Basic course
Vision Line Detect - Basic 2 days English 12 2018-03-19 2018-03-20
Vision Line Detect - Basic 2 days English 16 2018-04-16 2018-04-17
Course
Vision Line - Systems 1 day German 6 2018-02-07
Course
Vision Line - Systems 1 day English 16 2018-04-18
24
PFO introduction
PFO introduction
This course is aimed at whoever operates laser devices with a programmable focusing optics. This course provides you with basic knowledge of optics and their interfaces. Furthermore, the course covers the operation and the program-ming of the PFO editor and practical exercises.
Course duration: 1 dayMat. no.: 2269602
Note: Requirement for participation is atten-ding a laser course.
We offer the following training for the PFO introductory course:
25
Course information and dates Duration Language CW on the
Introductory course
PFO introduction 1 day German 3 2018-01-19
PFO introduction 1 day German 5 2018-02-02
PFO introduction 1 day German 6 2018-02-09
PFO introduction 1 day German 8 2018-02-23
PFO introduction 1 day German 15 2018-04-13
Introductory PFO course
PFO introduction 1 day English 12 2018-03-23
PFO introduction 1 day English 24 2018-06-15
PFO introduction 1 day English 25 2018-06-22
26
TruMark
The TruMark newcomer course is aimed at operators who have no had no previous experience with the marking laser. The course is an ideal preparation for the TruMark operator software course.
Participation in the TruMark professional operator software course is required to participate in a maintenan-ce or repair course for the TruMark series.
1 day
1 day
1 day
TruMark newcomers
TruTops Mark professional course
TruMark 3000/5000 maintenance course
TruMark 3000/5000 maintenance course
TruMark 6000 maintenance
TruMark 6000 main-tenance course
TruMicro Mark main-tenance course
2 days
27
TruMark newcomer
We offer the following training for Trumark newcomers:
This training is aimed at whoever is not yet fa-miliar with the topic of marking lasers. The goal is to build up the basic knowledge required to participate easily in the TruMark professional course.
Course duration: 1 dayMat. no.: 2269764
Note: Dates for holding these trainings are avai-lable on request.
Newcomer (operator software course)
Course information and dates Duration Language CW from to
Newcomer (operator software)
Newcomer 1 day German On request
28
TruMark Professional (operator software)
TruTops Mark professional course
This training is aimed at whoever wants to learn the TruMark software and wants to acquire knowledge for complex applications of the Tru-Mark programs.
Course duration: 2 daysMat. no.: 2269765
We offer the following training for the TruMark software:
Course information and dates Duration Language CW from to
Professional course (operator software)
TruMark professional 2 days German 2 2018-01-08 2018-01-09
TruMark professional 2 days German 2 2018-01-10 2018-01-11
TruMark professional * 2 days German 3 2018-01-15 2018-01-16
TruMark professional * 2 days German 4 2018-01-22 2018-01-23
TruMark professional 2 days German 5 2018-01-29 2018-01-30
TruMark professional 2 days German 5 2018-01-31 2018-02-01
TruMark professional * 2 days German 6 2018-02-05 2018-02-06
TruMark professional 2 days German 7 2018-02-15 2018-02-16
TruMark professional * 2 days German 8 2018-02-19 2018-02-20
Note: This course is a requirement for partici-pating in the TruMark maintenance and re-pair course.
The courses marked with a * can only be book-ed together with a TruMark maintenance and repair course.
Course information and dates Duration Language CW from to
Professional course (operator software)
TruMark professional 2 days German 9 2018-02-26 2018-02-27
TruMark professional 2 days German 9 2018-02-28 2018-03-01
TruMark professional * 2 days German 10 2018-03-06 2018-03-06
TruMark professional * 2 days German 11 2018-03-12 2018-03-13
TruMark professional 2 days German 12 2018-03-19 2018-03-20
TruMark professional 2 days German 12 2018-03-21 2018-03-22
TruMark professional * 2 days German 13 2018-03-26 2018-03-27
TruMark professional * 2 days German 14 2018-04-03 2018-04-04
TruMark professional 2 days German 15 2018-04-09 2018-04-10
TruMark professional 2 days German 15 2018-04-11 2018-04-12
TruMark professional * 2 days German 16 2018-04-16 2018-04-17
TruMark professional * 2 days German 17 2018-04-23 2018-04-24
TruMark professional 2 days German 18 2018-05-03 2018-05-04
TruMark professional 2 days German 19 2018-05-07 2018-05-08
TruMark professional * 2 days German 20 2018-05-14 2018-05-15
TruMark professional * 2 days German 21 2018-05-22 2018-05-23
TruMark professional 2 days German 22 2018-05-28 2018-05-29
TruMark professional 2 days German 23 2018-06-04 2018-06-05
TruMark professional 2 days German 23 2018-06-06 2018-06-07
TruMark professional * 2 days German 24 2018-06-11 2018-06-12
TruMark professional * 2 days German 25 2018-06-18 2018-06-19
TruMark professional 2 days German 26 2018-06-25 2018-06-26
TruMark professional 2 days German 26 2018-06-27 2018-06-28
29
Maintenance course
TruMark 3000 / 5000 with TruTopsMark 1 day German 3 2018-01-17
TruMark 3000 / 5000 with TruTopsMark 1 day German 6 2018-02-07
TruMark 3000 / 5000 with TruTopsMark 1 day German 10 2018-03-07
TruMark 3000 / 5000 with TruTopsMark 1 day German 13 2018-03-28
TruMark 3000 / 5000 with TruTopsMark 1 day German 16 2018-04-18
TruMark 3000 / 5000 with TruTopsMark 1 day German 20 2017-05-16
TruMark 3000 / 5000 with TruTopsMark 1 day German 24 2018-06-13
30
TruMark 3000/5000 Maintenance
This training is aimed at whoever is responsible for the maintenance work on laser system and operations such as changing filter and pump mo-dules.
Course duration: 1 dayMat. no.: 2269769
Note: The maintenance course can only be book-ed together with the above described TruMark Professional course.
Maintenance courseTruMark 3000/5000
We offer the following trainings for the TruMark 3000/5000 series:
Course information and dates Duration Language CW on the
Maintenance course
TruMark 3000 / 5000 with TruTopsMark 1 day German 3 2018-01-18
TruMark 3000 / 5000 with TruTopsMark 1 day German 6 2018-02-08
TruMark 3000 / 5000 with TruTopsMark 1 day German 10 2018-03-08
TruMark 3000 / 5000 with TruTopsMark 1 day German 13 2018-03-29
TruMark 3000 / 5000 with TruTopsMark 1 day German 16 2018-04-19
TruMark 3000 / 5000 with TruTopsMark 1 day German 20 2017-05-17
TruMark 3000 / 5000 with TruTopsMark 1 day German 24 2018-06-14
31
TruMark 3000/5000 maintenance
We offer the following trainings for the TruMark 3000/5000 series:
This training is aimed at whoever wants to carry out simple repairs on the laser system, such as replacing boards or checking the power.
Note: The maintenance course can only be booked together with the previous maintenan-ce course.
Course duration: 1 dayMat. no.: 2269766
TruMark 3000/5000 maintenance course
Maintenance course
TruMark 6000 with TruTopsMark 1 day German 4 2018-02-24
TruMark 6000 with TruTopsMark 1 day German 8 2018-02-21
TruMark 6000 with TruTopsMark 1 day German 11 2018-03-14
TruMark 6000 with TruTopsMark 1 day German 14 2018-04-05
TruMark 6000 with TruTopsMark 1 day German 17 2018-04-25
TruMark 6000 with TruTopsMark 1 day German 21 2017-05-24
TruMark 6000 with TruTopsMark 1 day German 25 2018-06-20
32
TruMark 6000 main-tenance
We offer the following trainings for the TruMark 6000 series:
This training is aimed at whoever is responsible for the maintenance work on laser system and operations such as changing filter and pump mo-dules.
Course duration: 1 dayMat. no.: 2269769
Note: The maintenance course can only be book-ed together with the above described TruMark Professional course.
TruMark 6000 maintenance course
Course information and dates Duration Language CW on the
Maintenance course
TruMark 6000 with TruTopsMark 1 day German 4 2018-01-25
TruMark 6000 with TruTopsMark 1 day German 8 2018-02-22
TruMark 6000 with TruTopsMark 1 day German 11 2018-03-15
TruMark 6000 with TruTopsMark 1 day German 14 2018-04-06
TruMark 6000 with TruTopsMark 1 day German 17 2018-04-26
TruMark 6000 with TruTopsMark 1 day German 21 2017-05-25
TruMark 6000 with TruTopsMark 1 day German 25 2018-06-21
33
TruMark 6000 main-tenance
This training is aimed at whoever wants to carry out simple repairs on the laser system, such as replacing boards or checking the power.
Note: The maintenance course can only be booked together with the previous maintenan-ce course.
Course duration: 1 dayMat. no.: 2269767
TruMark 6000 maintenance course
We offer the following trainings for the TruMark 6000 series:
Course information and dates Duration Language CW on the
Maintenance course
TruMicro Mark 1 day German On request
We offer the following trainings for the TruMicro Mark series:
This training is aimed at whoever wants to carry out simple repairs on the laser system, such as replacing boards or checking the power.
Course duration: 1 dayMat. no.: 2245882
Note: Dates for holding these trainings are avai-lable on request.
TruMicro Mark maintenance course
34
TruMicro Mark
TruTop PFO operator and programming course
Course information and dates Duration Language CW from to
Operator and programming course
TruTops PFO 2 days German 7 2017-02-15 2017-02-16
Operator and programming course
TruTops PFO 2 days English 17 2017-04-26 2017-04-27
This course is aimed at whoever wants to acqui-re basic knowledge of TruTops PFO software in order to create complex processing programs for programmable focusing optics, such as PFO and SFO.
Course duration: 2 daysMat. no.: 1976233
Note: Knowledge of the mechanical structure and mode of operation of programmable fo-cusing optics is required to participate.
We offer the following training for TruTops PFO course:
35
TruTops PFO
36
I-PFO
I-PFO (operator and programming cour-
The I-PFO (intelligent PFO) is a PFO focusing optics software and is connected to a robot and a TruDisk laser.
The I-PFO is used as tool for welding. The I-PFO starts the processing based on information about the current robot movement, which is continuously transferred. It knows the exact time and point at which to weld.
A camera and an image analysis software can be used to check whether the welding seam is OK or needs to be corrected.
The course provides basic knowledge on com-municating between laser device, robot and focusing optics. Practical exercises are carried out by TRUMPF on the exercise workpieces.
Course duration: 3 daysMat. no.: 2317880
We offer the following training for the I-PFO:
Note: Attendance at a laser course and a ro-bot training is required to participate.
Dates for holding these trainings are available on request.
37
Course information and dates Duration Language from to
I-PFO course
I-PFO 3 days German On request
I-PFO course
I-PFO 3 days English On request
TruTops I-PFO (software course)
38
TruTops I-PFO
We offer the following training for TruTops I-PFO:
TruTops I-PFO is an offline tool for designing a process-optimized I-PFO remote process.
This training is aimed at trained operators and programmers that use an I-PFO.
Course duration: 2 daysMat. no.: 2317879
Notes: Basic knowledge of laser operation and knowledge of programmable focusing op-tics, participation in the I-PFO course, as well as participation confirmation of a course on KUKA robot control, such as KRC4 (offers via KUKA College website), are required for the participa-tion.
Dates for holding these trainings are available on request.
39
Course information and dates Duration Language from to
TruTops I-PFO course
TruTops I-PFO 2 days German On request
TruTops I-PFO course
TruTops I-PFO 2 days English On request
SeamLine Remote
40
SeamLine Remote
This course is aimed at whoever wants to acqui-re basic knowledge of SeamLine Remote. The course covers the theoretical basics and practi-cal exercises are carried out.
Course duration: 2 daysMat. no.: 2317932
Note: A basic knowledge of operating a laser device with TruControl 1000 and knowledge of operating a PFO is required for participation.
Dates for holding these trainings are available on request.
We offer the following training for SeamLine Remote:
Course information and dates Duration Language from to
SeamLine Remote course
SeamLine Remote 2 days German On request
SeamLine Remote course
SeamLine Remote 2 days English On request
41
42
Ask us
Dates and contents for holding this course are available on request.
Individual special courses
You have the option of taking individual special courses in addition to our catalog courses. The contents of these special courses is configured in close cooperation with you.
Course duration: Individual
Note: Special courses depend on the availability of the required laser devices, training rooms and training presenters.
Special courses
TRUMPF Laser GmbHTraining + Application CenterBenzstrasse 5 · 78655 DunningenTelephone +49 (0) 7422 515-590 · Fax +49 (0) 7422 515-998836E-mail [email protected] · Website www.trumpf-laser.com
TRUMPF is certified according to ISO 9001:2008
(for more information refer to www.trumpf.com)
ID n
o. 0
3785
09_ 2
018_
Web
– S
ubje
ct to
mod
ifica
tion
– V
2.0