MADE IN ITALY

www.elcoman.it

TS Line Shreddersat a glance

TECHNICAL DATA 2019

Kobra 260 TS

Kobra 270 TS

Kobra 310 TS-AF

Kobra 310 TS

Kobra 410 TS

Kobra 245 TS

Kobra 430 TS

Kobra 310 TS HD

TS LINETechnology and Innovation

The highest shredding and security performances with the widest choice ever of shredding solutions

TWO SEPARATE SETS OF CUTTING KNIVESTwo separate sets of cutting knives for the separate insertion and shredding of paper and plastic. Available for CD shredding 3,2x50mm or for High Security CD shredding HS 1,5x2,5 mm (see model specifications).

EPC - Electronic Power ControlShows the shredding load required to optimise shredding without jams (Kobra 270, 310, 410TS series)

METAL DETECTION SYSTEMStops the machine when large metal objects, which could cause a damage to the cutting knives, are accidentally inserted.

AUTOMATIC OILERKobra TS cross-cut and High Security shredders can be equipped with an integrated automatic oiler, which activates a light signal when the oil bottle is low. This system eliminates the need of manual oiling of cutting knives.

AUTOMATIC REVERSE SYSTEMComes on when too much material is inserted into the shredder and puts the machine into automatic reverse mode.

AUTOMATIC FEEDERJust insert the documents to shred into the automatic feeder and it will shred automatically each document and turn into its stand-by position when shredding is completed (Kobra 310 TS series).

24 HOUR CONTINUOUS DUTY MOTOR24 hour continuous duty motor, without overheating.

CHAIN DRIVESUPER POTENTIAL POWER SYSTEMMaximum strength and wear resistance guaranteed by steel gears and chain drive system.

ENERGY SMART®Stand-by power saving mode after 8 seconds of no use. Automatic disconnection from power supply after 4 hours of non operation.

TOUCH SCREEN PANELAll controls are activated by simply touching the panel. Shreds transparent material by keeping the finger on the Forward control for 5 seconds.

TWO

SEPA

RA

TE SETS OF CUTTING KNIVES

AUTO

MATIC OILING SYSTEM

MET

AL DETECTION SYSTEM

SHRED GUARD

SUPE

R POT

ENTIAL POWER SYSTEM

AUTO-FEEDER

AUTO

MATIC REVERSE

100% JAM PROOF

24 H

OUR C

ONTINUOUS DUTY MOTOR

NO OVERHEATING

EN

ERGY SMART

ENVIRONMENTALLY FRIENDL

Y

TOUC

H SCREEN PANEL

ELEC

TRONIC POWER CONTROL

EPCSHREDDING LOAD LEVEL

310 TS AF310 TS

EN

ERGY SMART

ENVIRONMENTALLY FRIENDL

Y

UNI EN ISO 9001:2015 Cert. No.9105 EL16

ISO 9000 REGISTERED QUALITY COMPANY

Kobra 245 TSS4-SF S4 S5 C2 C4

245

3,8 3,8 5,8 1,9x15 3,9x40

14/16 25/27 27/29 11/13 21/23

11/13 20/22 22/24 9/11 16/18

P-2 P-5 P-4

T-2 T-2 T-2 T-5 T-4

E-2 E-2 E-2 E-4 E-3

O-2 O-2 O-3

T-2 T-2

F-2 F-1

40

0,15 0,07

59 55

230

460

23 24 27

(E)

Optional

Optional

40 x 36 x 61

Kobra 260 TS

S4 S5 C2 C4

260

3,8 5,8 1,9x15 3,9x40

26/28 28/30 12/14 22/24

21/23 23/25 10/12 17/19

P-2 P-5 P-4

T-2 T-2 T-5 T-4

E-2 E-2 E-4 E-3

O-2 O-2 O-3

T-2 T-2

F-2 F-1

60

0,05 0,07

55

230

460

29 32

(E)

Optional

Optional

Standard (O-1 T-2 E-2)

40 x 36 x 80

Kobra 270 TS

S4 S5 C2 C4

270

3,8 5,8 1,9x15 3,9x40

27/29 30/32 12/14 23/25

22/24 24/26 10/12 18/20

P-2 P-5 P-4

T-2 T-2 T-5 T-4

E-2 E-2 E-4 E-3

O-2 O-2 O-3

T-2 T-2

F-2 F-1

110

0,06 0,07 0,06 0,07

55

230

460

45 46

(E)

Optional

Optional

Standard (O-1 T-2 E-2)

53 x 43 x 88

Kobra 310 TS

SS4 SS5 CC2 CC4

310

3,8 5,8 1,9x15 3,9x40

37/39 45/47 17/19 29/31

31/33 37/39 14/16 25/27

P-2 P-5 P-4

T-2 T-2 T-5 T-4

E-2 E-2 E-4 E-3

O-2 O-2 O-3

T-2 T-2 T-4

F-2 F-1

135

0,08 0,07

58

230

920 (2x460)

56 54/57

(E)

Optional

AF - Optional

LK - Optional

Optional ***Optional

Standard (O-1 T-2 E-2)

53 x 43 x 96 / 103 (auto-feeder)

Kobra 310 TS HD

C2 C4

310

1,9x15 3,9x40

30/32 54/56

27/29 48/50

P-5 P-4

T-5 T-4

E-4 E-3

O-4 O-3

T-5 T-4

F-2 F-1

E-4 E-3

135

0,1

63

230

2600

88

(E)

Standard

Optional

53 x 43 x 96

Kobra 410 TS

S5 C2 C4

410

5,8 1,9x15 3,9x40

68/72 30/32 54/56

60/64 27/29 48/50

P-2 P-5 P-4

T-2 T-5 T-4

E-2 E-4 E-3

O-2 O-4 O-3

T-2 T-5 T-4

F-2 F-1

E-2 E-4 E-3

205

0,1

63

230

2600

105 112

(E)

Standard

Optional

Optional (O-3 T-4 E-3)

60 x 48 x 104

Kobra 430 TS

C2 C4

430

1,9x15 5,8x50

60/65 125/130

50/55 100/105

P-5 P-3

T-5 T-3

E-4 E-2

O-4 O-2

T-5 T-3

E-4 E-2

470

0,21

60

380-415

4000

480

Standard

81 x 161 x 170

TS LINE

MODEL

Throat width (mm)

Shred size (mm)

Sheet capacity* (A4/70g)

Sheet capacity* (A4/80g)

Security Level ISO/IEC 21964 (DIN 66399)

Shreddable Material

Credit card

Smart card

CD/DVD/BluRayDisc

Floppy disk

Microfilm/Foil

Memory stick

Main Features

Waste bin or bag volume (L) / Waste bag

Speed** (m/s)

Noise level (dba)

Voltage (V50/60Hz)

Power (Watt)

Weight standard/with auto-feeder (Kg)

Technological Equipments

ENERGY SMART® System

24 Hour continuous duty motor / Motor thermal protection

Super Potential Power System

Automatic Start & Stop Electronic eyes (E) • Sensor (S)

EPC – Electronic Power Control

Safety Stop with light signal for open door/bin out

Safety Stop with light signal for bag or bin full

Automatic Reverse System

Optionals Available

AO - Automatic Oiler

AF - Automatic Feeder

LK - Lockable Cover

MD - Metal Detection (Shred Guard)

CD - CDs/DVDs Cutting Unit

Dimensions

Width x Depth x Height/with auto-feeder (cm)

ENERGY SMART® Management System for power saving stand-by mode

deskside shredderssecurity levels p-2/p-4/p-5

medium office shredderssecurity levels p-2/p-4/p-5

medium/large office shredderssecurity levels p-2/p-4/p-5

heavy duty shredderssecurity levels p-2/p-4/p-5

industrialshredders

shredders are built according to CE standard and carry the most International recognized safety marks

***Metal detector system available on all models without Auto-Feeder

and ENERGY SMART®

are registered trademarks

Legenda ISO/IEC 21964 (DIN 66399) Paper...............................P

CD / DVD........................OFloppy disk....................TCredit card....................T

Smart card................... EUSB................................. EFilm................................. F

Straight-cut models S4 I S5

Cross-cut modelsC2 I C4

*Capacity varies on supply power, weight, quality and grain of paper, operating temperature and blade lubrication**Speed calculated at 60 Hz as knife outside diameter x rpm

EN

ERGY SMART

ENVIRONMENTALLY FRIENDL

Y

www.elcoman.it

UNI EN ISO 9001:2015 Cert. No.9105 EL16

ISO 9000 REGISTERED QUALITY COMPANY

Kobra 245 TS Kobra 260 TS Kobra 270 TS Kobra 310 TS Kobra 310 TS HD Kobra 410 TS

HS HS-6 HS HS-6 HS HS-6 HS S-6 HS HS-6 HS HS-6

245 260 270 310 310 410

0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 0,8x5 0,8x9,5 1x5 0,8x9,5 1x5

6/8 4/5 6/8 4/5 8/10 4/5 11/13 5/6 20/22 12 20/22 12

5/6 3/4 5/6 3/4 7/8 3/4 10/11 4/5 18/20 10 18/20 10

P-6 P-7 P-6 P-7 P-6 P-7 P-6 P-7 P-6 P-7 P-6 P-7

T-6 T-6 T-6 T-6 T-6 T-6

E-5

O-5

F-3 F-3 F-3 F-3 F-3 F-3

40 60 110 135 205

0,08 0,08 0,07 0,08 0,08 0,1 0,1

55 58 63

230 230

460 920 (2x460) 2600

29 33 50 57/59 91 128

(E)

Optional Standard

AF - Optional

LK - Optional

Optional ***Optional Optional

CD - Optional (O-1 T-2 E-2) CD - Optional 1,5x2 mm (O-6 T-6 E-5)

40 53 60

36 43 48

61 80 88 96/103 96 104

TS LINE

HIGH SECURITY MODEL

Throat width (mm)

Shred size (mm)

Sheet capacity* (A4/70g)

Sheet capacity* (A4/80g)

Security Level ISO/IEC 21964 (DIN 66399)

Shreddable Material

Credit card

Smart card

CD/DVD/BluRayDisc

Floppy disk

Microfilm/Foil

Memory stick

Main Features

Waste bin/bag volume (L) / Waste bag

Speed** (m/s)

Noise level (dba)

Voltage (V50/60Hz)

Power (Watt)

Weight standard/with auto-feeder (Kg)

Technological Equipments

ENERGY SMART® System

24 Hour continuous duty motor / Motor thermal protection

Super Potential Power System

Automatic Start & Stop Electronic eyes (E) • Sensor (S)

EPC – System wydajności niszczenia

Safety Stop with light signal for open door/bin out

Safety Stop with light signal for bag or bin full

Automatic Reverse System

Optionals Available

AO - Automatic Oiler

AF - Automatic Feeder

LK - Lockable Cover

MD - Metal Detection (Shred Guard)

CD - CDs/DVDs Cutting Unit

Dimensions

Width (cm)

Depth (cm)

Height (cm)

ENERGY SMART® Management System for power saving stand-by mode

shredders are built according to CE standard and carry the most International recognized safety marks

and ENERGY SMART®

are registered trademarks

*Capacity varies on supply power, weight, quality and grain of paper, operating temperature and blade lubrication**Speed calculated at 60 Hz as knife outside diameter x rpm***Metal detector system available on all models without Auto-Feeder

High Security modelsHS I HS-6

high securityshredderssecurity levels p-6/p-7

ISO/IEC 21964 (DIN 66399) Security Levels & Data Carrier Classification

Data in Original Size on: Paper, Printout, films, printing plates etc.

PP-1 Stripe width max 12 mmP-2 Stripe width max 6 mm

P-3 Cross Cut < 320 mm2

P-4 Cross Cut < 160 mm2

P-5 Cross Cut < 30 mm2

P-6 Cross Cut < 10 mm2

P-7 Cross Cut < 5 mm2

Data on Optical Carriers: CDs, DVDs etc.

0O-1 Cross Cut < 2000 mm2

O-2 Cross Cut < 800 mm2O-3 Cross Cut < 160 mm2

O-4 Cross Cut < 30 mm2

O-5 Cross Cut < 10 mm2

O-6 Cross Cut < 5 mm2

O-7 Cross Cut < 0,2 mm2

Data on Magnetic Carriers: Credit Cards, Floppy Disks, ID Cards, Magnetic Tape Cassettes, etc.

TT-1 Mechanically inoperableT-2 Cross Cut < 2000 mm2

T-3 Cross Cut < 320 mm2

T-4 Cross Cut < 160 mm2

T-5 Cross Cut < 30 mm2

T-6 Cross Cut < 10 mm2

T-7 Cross Cut < 2,5 mm2

Data on electronic data carriers: Memory Sticks, Chip cards, Semiconductor Hard Drives, mobile communication media, etc.

EE-1 Mechanically/Electroni- cally inoperableE-2 Split

E-3 Cross Cut < 160 mm2

E-4 Cross Cut < 30 mm2

E-5 Cross Cut < 10 mm2

E-6 Cross Cut < 1 mm2

E-7 Cross Cut < 0,5 mm2

Reduced size data on: micro-films and foils

FF-1 Cross Cut < 160 mm2

F-2 Cross Cut < 30 mm2

F-3 Cross Cut < 10 mm2

F-4 Cross Cut < 2,5 mm2

F-5 Cross Cut < 1 mm2

F-6 Cross Cut < 0,5 mm2 F-7 Cross Cut < 0,2 mm2

Data on Hard Disks (with magnetic data carriers)

HH-1 Mechanically/Electroni- cally inoperableH-2 Damaged

H-3 DeformedH-4 Cross Cut < 2000 mm2

H-5 Cross Cut < 320 mm2

H-6 Cross Cut < 10 mm2

H-7 Cross Cut < 5 mm2

Via Gorizia, 920813 Bovisio Masciago (MB), ItalyTel +39 0362 593584Fax +39 0362 591611kobra@elcoman.itwww.elcoman.it

UNI EN ISO 9001:2015 Cert. No.9105 EL16

ISO 9000 REGISTERED QUALITY COMPANY

CT-

156

/ 11

/ 3

1.07

.201

9

shredders are built with the highest quality materials according to ISO 9001:2015 standards.

Authorized Dealer

Technical Data as of 07/2019. Specifications in this publication may be subject to change without notice.