PROFESSIONAL LAUNDRY

31 23 24 23 12.29 12.19 13.27 15.24 409 543 512 550 0.98 0.98 1.06 1.22

T5550

30.5/67.2 25/55.1550913

24/3211 2700 (33)

36

Tumble dryerT5550

Certified in accordance with ISO 9001 and ISO 14001 and approved IP X4.

* At rated capacity 100% cotton load at 50% initial moisture dryed to 0%.

24 kW 32 kW Gas Steam

Main specifications Rated capacity, filling factor 1:18 kg/lb

filling factor 1:22 kg/lb Drum volume litre Drum diameter mm Heating alternatives

electric kW gas BTU/h (kW) steam at 600-700 kPa kW

Consumption data*Total time at 25 kg min Energy consumption at 25 kg kWh Evaporation g/min Energy kWh/litre water evaporated kWh/l

Images shown are a representation of the product only and variations may occur.

Features and benefits• Axial airflow and tight construction gives low energy consumption• High productivity - 2 full loads per hour• Large door opening for easy loading and unloading• Easy and ergonomic access to the lint screen• Excellent water evaporation efficiency per kWh• The coin version with Ecopower to avoid over drying of the garments and

get a lower energy consumption• With Compass Pro program control

- Large and clear display with control knob for easy program selection- Easy access with user-friendly interface- Language selection- Drying program packages optimized for Economy, Care and Time- Service program for adjustment of parameters- USB connection

Main options• Stainless steel front• Stainless steel drum• Residual Moisture Control - RMC• Connection to booking- /payment- system or coin meter• Reversing drum• Emergency stop button• Supply disconnector

Accessories• Fresh air intake• Exhaust on top• Insert for drying special equipment

T5550

1” 100-1000

65 1”

1/2” 2000 20

2800-3700 28-37 200

940 / 940 940 / 940 1080 / 1080

480 / 950 420 / 900 1300 / 1550

<70

15

280 2.80

961 1365 1445 1869 660 720 170 1490 200 180 1560 50 480 580 805

Share more of our thinking at www.electrolux.com

A

B(a)

E

C

B(b)

D

G

H

J

IF

K

M

N

L

1

2

7

6

5

6

37

3 4

5

8

220–240V 1 ~ 50/60 24.0 26.2 125 220–240V 3 ~ 50/60 24.0/32.0 26.3/34.3 80/100 380–415V 3 ~ 50/60 24.0/32.0 26.7/34.7 50/50

220–240V 1 ~ 50/60 - 1.9 10 220–240V 3 ~ 50/60 - 2.4 10

380–415V 3 ~ 50/60 - 2.6 10

Steam, gas and air connections

Steam ISO 7/1-R Steam pressure kPa Steam consumption kg/h Condensate ISO 7/1-R Gas NG/PG ISO 7/1-R Gas pressure Natural gas Pa

mbar Propane Pa

mbarAir outlet ø mm Maximum air flow:

Electric 50 Hz / 60 Hz m3/h Gas 50 Hz / 60 Hz m3/h Steam 50 Hz / 60 Hz m3/h

Maximum static back pressure: Electric 50 Hz / 60 Hz Pa Gas 50 Hz / 60 Hz Pa Steam 50 Hz / 60 Hz Pa

Sound levels

Airborne sound level dB(A)

Heat emission

% of installed power, max

Shipping data**

net, kg Shipping volume crated, m3

Dimensions in mm

A WidthB(a) Depth B(b) DepthC HeightD E F G H I J K L M N

1 Control panel 2 Door opening ø 810 mm 3 Electrical connection 4 Gas connection 5 Exhaust connection 6 Condensate connection 7 Steam connection 8 Lint screen

Art. N

o. 4

3891

3781/2

015.01

.14

We

rese

rve

the

right to

alte

r sp

ecific

ations

with

out no

tice.

Front

Left side

Rear side

El, gas Steam

www.electrolux.com/professional

* Other voltages available, see installation manual.** Average data. Crated weight/shipping volume depends on configuration.

Please contact logistics for exact measures.

Electrical connections* Heating Main voltage Heating Total Recommended alternative power power fuse

Hz kW kW A

Electric heated

Gas heated/ Steam heated

* Customer supplied services must be located within 1 metre of each service connection point on machine for standard fittings to reach. See machine drawing for locations.This work is protected by copyright. Reproduction in whole or in part, in 2 or 3 dimensions is expressly forbidden except with the prior written permission of the copyright owner. © Richard Jay Laundry Equipment Pty Ltd.

PRODUCT INSTALLATION SPECIFICATIONS MODEL T5550 CAPACITY – kgs filling factor 1:18 30.5 HEIGHT – mms 1869 WIDTH – mms 961 DEPTH – mms 1445 SPACE REQUIRED AROUND MACHINE – mms 150 Above

10 Sides 500 Behind

APPROX.WEIGHT – kgs 280 LEGS FREE STAND HEIGHT UNDER DOOR OPENING – mms 720 GAS CONNECTION – inches (dryer fitting is male) Regulated gas supply with isolation valve required. 1/2 GAS RATING – megajoules 119 MJ

NATURAL GAS PRESSURE REQUIRED.

1.13 kPa

LPG GAS PRESSURE REQUIRED.

2.75 kPa

DUCT SIZE – inches (single skin round galv. outlet). The dryer is pre-set for optimal air flow with up to 15 m equivalent pipe length. For longer pipes it is necessary to adjust the dryer according to the Manufacturers instructions within allowable limits.

200 mm

MAKE UP AIR OPENING REQUIRED (to outside). Recommended area of fresh air intake For maximum efficiency and the shortest possible drying time, it is important to ensure that fresh air is able to enter the room from the outside in the same volume as that blown out of the room. To avoid draught in the room it is important to place the air inlet behind the machine. The area of the air inlet opening is recommended to be five times the size of the exhaust pipe area. Note! Gratings/slatted covers often block half of the total fresh air vent area. Remember to take this into account. The area of the inlet opening is the area through which the air can flow without resistance from the grating/slatted cover.

0.16 m2

MAXIMUM AIR FLOW: Electric - m3/h Gas - m3/h Steam - m3/h

MAXIMUM STATIC BACK PRESSURE: Electric - - Pa Measured 1mt from exhaust outlet. Gas Pa

Steam- Pa

940 940 1080 480 420 1300

POWER CONNECTION – GAS/STEAM HEATED 3-pin GPO required. 1 phase, 240v, 10amp GPO

CIRCUIT PROTECTION AMPS – GAS/STEAM HEATED 16 STEAM HEAT Regulated steam supply with isolation valve required. - Connection – inches (1 x steam input & 1 x condensate outlet) - Required pressure – kPa - Steam Consumption Kg/Hr

2 x 1inch 100-1000

65 POWER CONNECTION - WITH ELEC.HEAT 3-phase hard wire isolator required. 3 phase, 415v,

hard wired CIRCUIT PROTECTION AMPS - WITH ELEC. HEATING 50 NOISE LEVEL – Maximum dba 70