Tutorial Access 2007 Database

7/28/2019 Tutorial Access 2007 Database

1/23

Create Access 2007 Database

The first step in creating an Access 2007 database, is to create a blank database file. This is done

from the Getting Started Screen when you launch Access. The file is saved onto one of your PCs

folders (which you specify). The procedure for doing this is outlined below.

1. Launch Access

To begin, launch Access by clicking on the desktop icon, or choose Access from the start menu.This brings up the GETTING STARTED WITH MICROSOFT OFFICE ACCESS screen.

2. Select Blank Database Template

Towards the top left of the screen you will see a "Blank Database" icon. Click this icon to bringup the Blank Database side bar on the right hand side of the screen. This is where you will enter

details about the database file that you are about to create.

3. Enter filename for your Access 2007 database

Begin by entering the name that you want to call the database in the filename textbox.

4. Browse and select folder

Next click the folder icon and browse for a folder to put your database. Once selected you should

see the file path below the textbox.

5. Click Create

All you need to do now is click the "Create" command button below, and your database filesaves to the location that you specified, and opens for you to work on.


2/23

You are now ready to work on your newly created database file. The next step is to create an

Access table

Access 2007 Tables

How Access stores data in Tables

Like all other databases, Access 2007 stores data in tables. They look a lot like the cells of aspreadsheet with columns and rows. Each horizontal column represents a table record, and each

vertical column represents a table field. See Table example below:

A simple Table

ID Number FirstName Surname Age

1 John Jones 35

2 Tracey Smith 25

3 Anne McNeil 30

In the example Table above, there are four fields containing information about an individuals ID

number, first name, surname and age. Below the field headings there are 3 records containing

information or data for each individual. As such, a database table is a list with each column

containing the same specific sort of information. Each row of information is an individual recordthat might relate to a particular person, a business, or a product etc.

When planning a database table, most database designers will decide which column headings or

fields they are going to use. This is the basis of the table structure. The actual data is added laterand is not a part of the design process.

Create Access Table

1. Open database file

If you created a blank Access database in the previous tutorial lesson, you are now ready tocreate a new table. Begin by opening your existing database file if it is not already open. Do thisby clicking on the Access desktop icon to bring up the getting started screen again. You should

see the file name that you just created towards the top of the right hand side bar (If you cant see

it, click the folder icon to browse for the file). Click on the file name to bring up your blankdatabase.

If, at this stage, you get a security warning underneath the ribbon, click where it says options,

select the "enable this content" radio button (in the pop-up window), and then click ok.

Your blank database file should now be fully open.


3/23

2. Create Access Table

Select the CREATE tab on the Access ribbon. Next select the TABLE DESIGN icon from the

TABLES group. This creates a new table.

3. Create fields in DESIGN VIEW

This brings up the TABLE DESIGN GRID where you enter each field name and its data type.

The first field we are going to create is the ID field which is going to contain a unique referencenumber for each record. Enter the name "ID" into the first column of the first row in the grid.

Because we want Access to automatically generate a unique reference number, select

AUTONUMBER from the drop down list in the data type column. You can also enter adescription for each field, but this is not essential.

On the next row the field is going to be called FIRSTNAME and the data type is going to be

TEXT. On the third row the field name is SURNAME with the data type again being TEXT.

And finally, the last field name is AGE and the data type here is going to be NUMBER.

Before you save the table you will need to choose the Primary Key, which in this case is ID. To

do this, select the ID row by clicking on it, and then simply click the primary key symbol on the

Ribbon.

The table design grid should now look like this:


4/23

You can now save the table by clicking the save icon on the top left of the screen above theAccess Ribbon. To view your table select DATASHEET VIEW from the VIEWS group under

the DESIGN TAB. This brings up the datasheet view of the table that you have just created. Youshould see your field headings running across the top of the table.

Customizing an Access 2007 Form

Creating a form has always been easy with MS Access. There is the user friendly Form Design

Wizard, and in Access 2007 you can also set up a basic form by clicking a single Icon. These

methods are a great way to get started, and at a basic level they might even be all you need.

However, at more advanced levels you will more than likely want to modify the design of your

form manually, or even set up an Access Form from scratch. This post will explain how tomodify an existing form.

1/ If you have do not have an existing form to work on, begin by creating a simple form using

the Access Form Wizard or clicking the Form icon

on the Access 2007 Create Ribbon.

2/ When you open your form from the Navigation Window, it is ordinarily displayed in Form

View. This is the view that you work in when you perform database tasks such as entering and

updating records. We are going to be editing the form itself, and we do this by selecting Design

View. Click the arrow under the Views Icon on the Home Ribbon. This gives you a selection ofthree views ie Form View, Layout View, and Design View. See screen below:

Select Design View from the drop down menu. A form in design view will look something like

this:
http://ms-access-tips.blogspot.com/2009/11/access-form-design-tips.htmlhttp://www.dealing-with-data.net/create-access-form.htmlhttp://www.dealing-with-data.net/create-access-form.htmlhttp://ms-access-tips.blogspot.com/2009/11/access-form-design-tips.html


5/23

The labels are the boxes on the left, and the text boxes, which will contain the actual data from

the table, are located on the right. You are now in a position to customise the appearance of your

form.

3/ To delete an unwanted text box, simply select it by clicking on once and pressing the delete

key. If you select the right hand box the label will also delete automatically, but you can delete

the label without also deleting the text box if you wish.

4/ You can adjust the length of a label or text box. Click the label or text box to select, and then

hover the mouse on the edge of the box where there is a notch half way along the border.

At first all the text boxes may change size together as a group. To remove this grouping so that

individual text boxes can be adjusted, click the small square with the cross in the centre (this

appears top left of the group as you can see in the screen shot above); then clickRemove from

the Control Layout on the Arrange Ribbon - see below:

5/ You can move text boxes and labels to different areas on the form. Simply click and drag the

box.

6/ You might need to increase the size of the form by clicking and dragging the edge of the

design grid. To increase the size of the form vertically click the upper edge of the blue border

and drag downwards. To increase the width of the form, click the right hand edge and drag to the

right. You can also reduce the form size by dragging inwards.

4. Data entry in DATASHEET VIEW


6/23

Although entering data onto the datasheet table is not a part of the design process, the table now

exists as a database object, and you can test it by entering some information into the cells.

Select the first cell in the FIRSTNAME column and enter the name JOHN. For SURNAME

enter JONES, and for AGE enter 35.

NB just ignore the column underneath the heading ADD NEW FIELD. We created all the fields

we needed in design view.

You have now entered the first record in the table - record 1 for John Jones aged 35. You cannow press the return key and the record will save automatically. You are now ready to enter the

second record on the next row - TRACEY SMITH 25. Press return and then fill in the data for

the last record we are going to do for now - ANNE McNEIL 30

Your datasheet table should now look like this:

Working with Access Tables

Once you have an Access Table populated with data, you have the option to work with it right

away. Indeed, some people may not go on to create forms, queries, and reports once they havecreated their first table. With a single table you can, for example, store, edit, filter, search, and

calculate a set of database records. Now that you have created your first table and stored anumber of records, we will take a look how you go about working with tables. We shall use your

newly created table with some additional records to illustrate how to do this.

Feel free to download the populated database table or input the extra records manually so you

can try out the features yourself. This is the fully populated table we shall be working with:
http://www.dealing-with-data.net/tables/working-with-tables.accdbhttp://www.dealing-with-data.net/tables/working-with-tables.accdb


7/23

Follow the links below to learn about working with Access Database Tables

Edit Data

Edit DataEditing data in an Access table is a relatively simple task. Just click the cell containing the data

you wish to change. Delete or type over the old information and enter new data as required. As

you do so you will notice a pencil symbol appear on the far left of the table on the row you areediting. This indicates that you are in the process of editing a record and the changes have yet to

be saved to the database table. This symbol will remain while you update any other field in the

same row. Once you move out of the row, the changes will be saved automatically and the pencil

will disappear. The thing to remember is that when you edit data in a field, the whole record willbe saved once you have finished.

A table record in the process of being edited. Notice the pencil symbol on the left of the table.

The cell being edited is highlighted in orange. Once the new data has been entered and the row ismoved out of, this record will be saved.

Filter Data

Access Filter

The Access Filter is a way of reducing the number of records in a list which do not match a given

criteria. For example, you might want to view all the records for people with the surname 'Smith'.

In this case Smith is the criteria to match. All other records which have records that are notSmith will be filtered out of the list.

There are a number of ways to use this feature. The way that I have found most effective is to

use the Filter By Form method.

Filter By Form

If you look at the Sort and Filter group on the Home tab of the Access Ribbon, you will see alarge filter icon and three smaller icons entitled Selection, Advanced, and Toggle Filter. You

need to click the Advanced icon and select Filter By Form from the drop down list. Access will

then open up a blank datasheet with empty cells underneath your column headings. Click on the
http://www.dealing-with-data.net/tables/edit-table.htmlhttp://www.dealing-with-data.net/tables/access-filter.htmlhttp://www.dealing-with-data.net/tables/access-filter.htmlhttp://www.dealing-with-data.net/tables/edit-table.html


8/23

empty cell in the Surname column, and start entering the surname Smith. As you do so, Access

suggests surnames from your list based on the letters that you have typed so far. So once you get

to Sm..., Access completes the rest of the name for you.

The next thing that you need to do is click the Toggle Filter icon on the Ribbon to apply the

filter.

Result: a new filtered list is displayed containing all three records from your original table withthe surname 'Smith'.

Sort Table

Sort

The Sort feature of Access 2007 allows you to reorder a list of data in your table. This can be

done alphabetically or numerically, in ascending or descending order. It is a useful feature when

you want to sort your records into, say, surname order, or maybe in age order, for example.

To sort your records into surname order, click any cell in the surname column of your table. This

tells Access that your records are going to be sorted by this particular field. Next, look for theAZ Icon in the Sort & Filter group of the Home Ribbon. To sort in ascending order, click the

AZ Icon, or to sort in descending order, click the ZA Icon below. To remove the sort and getyour original list back in its original order, click the Clear All Sorts Icon, which is the lowest

Icon of the three.

Sorted into alphabetical order by the surname field.
http://www.dealing-with-data.net/tables/sort.htmlhttp://www.dealing-with-data.net/tables/sort.html


9/23

Search Table

Search Table

The new search feature in Access 2007 allows you to enter a search term into a small text box at

the bottom of the screen. As you type each letter, the first segment of data matching your searchterm is highlighted in the table. If there are a number of records containing your search term, you

can click the filter button adjacent to the search box to produce a filtered list matching your

search criteria.

Access search result - highlighted segment of data matching text entered into the Access Search

Box.

Calculating Data

Calculating Data

The Totals feature of Access 2007 allows calculations to be performed directly on a database

table. At its simplest, the totals feature can be used to count the number of records, or add acolumn of numbers in a table. It can also be used to calculate Average, Maximum/Minimum

values, Standard Deviation and Variance.

To use this feature, open your table and click the Totals icon which is located in the Records

group of the Home Ribbon. This produces an extra row at the bottom of the table with the word

Total in the left hand column.

To perform a calculation on your table, select which column you want to process, and click thecell for that column on the new Total row. When the arrow tag appears, click it to produce a drop

down list of functions. We are going to find out the average age in our table, so we shall select

the Average function from this list. The result of our calculation is then displayed in that cell (iethe Age column of the Total row). If we add an additional record to our table, the totals row will
http://www.dealing-with-data.net/tables/search.htmlhttp://www.dealing-with-data.net/tables/calculate.htmlhttp://www.dealing-with-data.net/tables/calculate.htmlhttp://www.dealing-with-data.net/tables/search.html


10/23

recalculate the result automatically to take account of the new data. You then have the option to

save the table with the new totals row and any calculation it is set to perform.

Access Totals - calculation of average age in list.

This was the last part for Working with Access Tables. The next section of the tutorial is

Creating an Access Form.

Calculated Controls

As well as being easy to use, Calculated Controls can be a really useful tool for the Access

Developer. They provide a flexible way to display data on form's, without being restricted to

information directly derived from a field in a table or query. We are all familiar with the simple

Text Box Control. Ordinarily these are boundto a particular field defined in the Text Box'sControl Source - ie the control's property that links the Text Box with the particular field that

supplies its data. Calculated Control's, however, are slightly different. Rather than using a field

from a table or query to supply the information displayed in the control, we instead enter an

expression into the text box control source.

Figure 1 (above): This is the property sheet for a Calculated Control.

The CONTROL SOURCE is located on the top line of the DATA TAB.

igure 2: This is how the Calculate Text Box Control appears in FORM DESIGN VIEW.

Notice how the expression is displayed in the text box itself. All expressions

begin the the=sign, and may consist ofoperators, identifiers, constants andfunctions.
http://www.dealing-with-data.net/create-access-form.htmlhttp://ms-access-tips.blogspot.com/2011/07/calculated-controls.htmlhttp://ms-access-tips.blogspot.com/2011/07/calculated-controls.htmlhttp://www.dealing-with-data.net/create-access-form.html


11/23

The expression I have entered in Figure 1 is used to perform a mathematical calculation. It

works by multiplying the values contained in two bound text box's on the same form in order to

produce a Total Amountin the calculated control. In this example I have been able to work out

the total value of an order item based on the Unit Costand Quantity Ordered. Here is the

finished result:

Figure 3: The Calculated Text Box Controlmultiplies

the UnitCost by Quantity to produce a Total.

The procedure for setting up a Calculated Control such as this is really quite easy. It is useful,

however, to have some knowledge of creating and modifying forms in DESIGN VIEW. This is

how I created the Calculated Text Box Control:

1. I began with an existing form called frmOrderDetails. The form was bound to a tablecalled tblOrderDetails. The form began with 4 text box's displaying the ProductId,OrderId, UnitCost, and Quantity fields.

2. The form was opened in DESIGN VIEW. This was done by right-clicking thefrmOrderDetails form, and selecting the Design View Icon from the drop down menu

which opened.

3. An unbound Text box Control was added by clicking the TEXT BOX icon andpositioning the control on the form design grid. The TEXT BOX Icon is located on the

CONTROLS group of the DESIGN ribbon. I had to make sure the USE CONTROL

WIZARDS icon was nothighlighted before doing so.

4. I then highlighted the new unbound Text Box Control and clicked the PROPERTYSHEET icon on the TOOLS group of the DESIGN RIBBON.

5. I needed to select the DATA tab on the newly opened PROPERTY SHEET.6. I then entered the expression =[unitcost]*[quantity] into the CONTROL SOURCE

property. Unitcost was a reference to the bound UnitCost text box, and Quantity was a

reference to the bound Quanty text box. These were the expression'sIdentifiers, and the

* symbol was it's multiplication operator. NB I could have typed this expression directlyinto the text box on the DESIGN GRID - it would have set the CONTROL SOURCE

property without having to open the PROPERTY SHEET.

7. Then when I opened the form and entered values in the two bound fields ofUnitCost andQuantity, theTotal Amountappeared automatically in the calculated text box control.

Once you have finished learning about creating and working with tables,the next section of thetutorial is about Access Forms.
http://ms-access-tips.blogspot.com/2009/11/creating-access-2007-form-from-scratch.htmlhttp://www.dealing-with-data.net/create-access-form.htmlhttp://www.dealing-with-data.net/create-access-form.htmlhttp://ms-access-tips.blogspot.com/2009/11/creating-access-2007-form-from-scratch.html


12/23

Access 2007 Forms

Access FORMS are user friendly

In the previous lesson, you created an Access Table and entered three records. However, to getthe most out of Access it makes sense to create a data entry FORM. By doing so you are makingyour database more user friendly. It is easier and quicker to enter data onto a form than it is into

a table, not least because you have more control over the layout and labelling of your form. In

this lesson we will learn how to create a FORM that uses your newly created table as the DATASOURCE.

Create Access form

There are a number of ways to create an Access form. In this lesson we are going to use theACCESS FORM WIZARD.

1. Select form wizard

Open your database if it is not already open. Click the CREATE tab on the ACCESS RIBBONand then select MORE FORMS from the forms group.

A drop down list of form types appears. You need to select FORM WIZARD from this list.

2. Select table and fields

The Form wizard then opens as the pop up window below.

On the first page of the form wizard we select which table we are going to use as the DATASOURCE. Since there is only one table in this database so far, it should already be selected for

us in the TABLES/QUERIES combo box.


13/23

Underneath there is a list of the four fields in your table. You could select each field individually

by highlighting the field name and clicking the single arrow >. We can, however, select all four

just by clicking the double arrow >>. Once they have been transfered into the right hand box theyare selected. We can now click NEXT to go to page 2 of the form wizard.

3. Form Layout

This is where we choose the FORM LAYOUT. We are going to leave this on the default setting

of COLUMNAR. Click NEXT again to move onto page three of the form wizard.

4. Form Style

Here we select a style that from the list box. Preview a style by clicking on its name. This stepjust determines how the form looks aesthetically. Once you have selected a style to your taste,click NEXT again.

5. Form Title

This is the last stage of the wizard. Here we are going to choose the name for our form - lets sayFORM1. We are going to leave the radio button selected for OPEN THE FORM TO ENTER ORVIEW INFORMATION

All we need to do now is click FINISH and our form should like something like this:


14/23

6. Navigate Records via Access Form

As you can see, the form opens with the first record in your original table displayed. You can

navigate through each record using the NAVIGATION BUTTON at the bottom left of the form

window.

To move to the next record click the right arrow button on the navigation control. To move to the

last record click the >| button on the navigation control. To move backwards through the

recordset use the left arrow buttons. You could edit any record from the form, which will updatethe data in your table. For now, though, just try navigating through the three records without

changing any data.

7. Create New Record via Access Form

Now that you know how to move through the recordset, lets finish off by adding two morerecords. To do this click the star button on the right of the navigation control. This should bring

up a blank record. Add JOE for firstname, BROWN for surname, and 39 for age. Click the star

again to bring up a new blank record, and enter SUE MOORE 33. When you have finished clickx on the form window to close.

This tutorial lesson has shown you how to create an Access Form using the form wizard, and

how to navigate and add records using Access Forms. There are also other ways to Create anAccess Form from Scratch orCustomize an Access Form, but this is as far as we are going to go

in this particular lesson. The next lesson in the tutorial is going to be Access 2007 queries.

Creating an Access 2007 Form from Scratch

This post complements yesterdays article on Customizing an Access Form. This time we are

going to look at Creating an Access 2007 Form from scratch.

1/ Begin by clicking the Form Design Icon on theCreate Ribbon. This opens a blank new form

in Design View.

The Form Design Icon on the far right of the Create Ribbon.
http://ms-access-tips.blogspot.com/2009/11/creating-access-2007-form-from-scratch.htmlhttp://ms-access-tips.blogspot.com/2009/11/creating-access-2007-form-from-scratch.htmlhttp://ms-access-tips.blogspot.com/2009/11/access-form-design-tips.htmlhttp://www.dealing-with-data.net/create-access-query.htmlhttp://ms-access-tips.blogspot.com/2009/11/creating-access-2007-form-from-scratch.htmlhttp://ms-access-tips.blogspot.com/2009/11/access-form-design-tips.htmlhttp://ms-access-tips.blogspot.com/2009/11/new-look-of-microsoft-office-access.htmlhttp://ms-access-tips.blogspot.com/2009/11/new-look-of-microsoft-office-access.htmlhttp://ms-access-tips.blogspot.com/2009/11/new-look-of-microsoft-office-access.htmlhttp://ms-access-tips.blogspot.com/2009/11/new-look-of-microsoft-office-access.htmlhttp://ms-access-tips.blogspot.com/2009/11/access-form-design-tips.htmlhttp://ms-access-tips.blogspot.com/2009/11/creating-access-2007-form-from-scratch.htmlhttp://www.dealing-with-data.net/create-access-query.htmlhttp://ms-access-tips.blogspot.com/2009/11/access-form-design-tips.htmlhttp://ms-access-tips.blogspot.com/2009/11/creating-access-2007-form-from-scratch.htmlhttp://ms-access-tips.blogspot.com/2009/11/creating-access-2007-form-from-scratch.html


15/23

Form Design View and the Property Sheet.

2/ Before we start creating text boxes and other form controls, we are going to bind the form to

an Access Table that has already been created. This is so Access knows where your forms' data is

going to come from. We do this by setting the Record Source property. If the property window

is not already open, click the property sheet icon in the Tools group of the Design Ribbon.

3/Select the Data Tab of the property sheet. This will display a grid of properties relating to your

form's data. It is the Record Source property that we are currently interested in. Click the arrow

to display a drop down list of potential database tables and queries that we can use. In this

example we are going to use the table called tblAccounts, which we will select by clicking.

Record Source property and the Property Sheet.

4/ We are now in a position to begin adding form Controls such as Text Boxes and Labels.

These are located in the Controls group on the Design Ribbon. We shall now click on the text

box icon and then move then cursor to the area of the form where we would like it to go. Then

simply right click the mouse over this point. This will place the text box control on our form.


16/23

The Controls group of the Design Ribbon.

The Text Box control is on the far left of the image.

5/ We shall now set the Control Source property of the text box. This determines which field

from the form's Record Source will be bound to the control. Do this by clicking the arrow to

display a drop down list of field names from the table which we earlier selected as our record

source. We shall choose the Description field. Like in stage 3, simply click the field name in the

list to select.

The Control Source Property.

Selecting a field name from the drop down list.

6/ You can now give your control a meaningful name. This is now displayed anywhere on the

form itself, but it will be the name that you use to reference it later on in the design process. Do

this by clicking the Other tab of the property sheet. The Name property should be at the top of

the grid. Access gives it a default name such as Text1. You can simply type the name

Description over this on the grid.


17/23

The Name Property for our text box control.

7/ We shall now change the Caption property of the label on the left of the text box. Unlike the

Name property which we set in the previous stage, the Caption is displayed on the form toprovide information to the user. In this case, it is going to tell the user that the information to

enter in the text box is going to be "Description". Do this be selecting the label on the design grid

by right clicking so that it goes orange. Next click the Format Tab on the property sheet and

type in "Description" on the property grid. Alternatively you can click the label on the design

grid to select, and then click inside the label to overwrite the old label caption directly.

You can now repeat this stage, adding as many text box controls as you need.

The Caption Property for our Label control.
http://3.bp.blogspot.com/_fkXFuzTmNBE/SvnQxWIu4uI/AAAAAAAAATo/R2CTgCXa3AU/s1600-h/caption-property.jpghttp://3.bp.blogspot.com/_fkXFuzTmNBE/SvnQxWIu4uI/AAAAAAAAATo/R2CTgCXa3AU/s1600-h/caption-property.jpg


18/23

8/ We will now finish off the form by entering a title. Do this by clicking on the Label control on

the Controls group of the Design Ribbon. Then choose a position at the top of the grid, and

click to add the label control to our form. We can now add our title text the same way as we

entered the caption in the previous stage. Once we have entered the title caption, we can now

increase the font size and make the text bold. Do this by right clicking the label to select, and

entering a new Font Size of 24, and clicking Bold in the Font group of the Home Ribbon. You

will also need to resize the label by double clicking the the notch on the labels border.

Access 2007 Query

Access Queries Process Data

If you have been following the previous lessons in this tutorial, you will have created a table withfive records. In this lesson we are going to create an Access 2007 QUERY, which will process

the data below which you have entered into your table.

ID Number FirstName Surname Age

1 John Jones 35

2 Tracey Smith 25

3 Anne McNeil 30

4 Joe Brown 39

5 Sue Moore 33

What we want Access to do is extract all the records in the above table where the persons age is

greater than or equal to 35. Access Queries can do far more than this, of course, but this simple

task should serve as a useful learning exercise.
http://3.bp.blogspot.com/_fkXFuzTmNBE/SvnUGLrTdrI/AAAAAAAAATw/uEuuzbc96j0/s1600-h/form.jpg


19/23

Open the Query Design Grid

The first stage is to select the CREATE TAB and then go to the OTHER group on the far right ofthe ribbon. Then click on the QUERY DESIGN ICON to bring up the query design grid.

Select Table for Query

The next stage is to select which table you are going to use in this query. When the query design

grid opened, the SHOW TABLE pop up window should also have opened. If necessary you can

open this window manually by clicking the SHOW TABLE icon in the QUERY SET UP group

on the Access Ribbon.

So far there is only one table in your database - TABLE1. This should be highlighted when thewindow opens, but if not, just click on it once. Next click ADD. When you close the pop-upwindow by clicking x,you should see a box labelled TABLE1 above the query design grid.

Select fields from Table

In the table1 box, you will see a list of its field names. We are going to use all the fields in this

query, so select each one individually by double clicking on their names. You will now see thefield names at the top of each column in the Query Design Grid.


20/23

Enter query criteria

As you may remember, the purpose of our query is to extract records where the persons name is

greater than or equal to 35. To do this we enter the criteria into the appropriate cell of the querydesign grid. In this case you need to go to the AGE column of the CRITERIA row, and enter the

formula >=35.

Save and Run Query

Click the save icon above the Access Ribbon. When prompted for the query name, just use the

default QUERY1. To run your query, click the RUN icon in the RESULTS GROUP of the

Access Ribbon. You should now be presented with a datasheet displaying your query results -JOHN JONES 35 and JOE BROWN 39.

You have now created and run your first query. The next lesson in the tutorial is about Access2007 Reports.

Access 2007 ReportsAccess Reports Present Data

Access REPORTS are a way of displaying and printing information from your database.Developers often use Reports to display the results of a Query, which is what we are going to do

next.
http://www.dealing-with-data.net/create-access-report.htmlhttp://www.dealing-with-data.net/create-access-report.htmlhttp://www.dealing-with-data.net/create-access-report.htmlhttp://www.dealing-with-data.net/create-access-report.html


21/23

Like other Access database objects, there a number of ways to create an Access REPORT. We

are going use the REPORT WIZARD. Our task is to display the results of QUERY1 which we

created in the previous tutorial lesson.

1. Open Report Wizard

Begin by selecting the CREATE TAB on the Access Ribbon. Then click REPORT WIZARD

from the REPORTS group to open the pop up window.

2. Select Report Data Source and Fields

The first page of the Report Wizard is almost identical to that of the Form Wizard. On this pagewe will select QUERY1 as the DATA SOURCE for the Report. This is done by selecting the

query from the list in the TABLES/QUERIES combo box. Then select all fields from QUERY1

by clicking the double arrow to the right of the text box labelled AVAILABLE FIELDS. Thefield names will now appear in the SELECTED FIELDS text box on the right. Click next to go

to the second page of the wizard.

3. Report Grouping Levels

Page two of the wizard is where you can add grouping levels if required. So we could, for

example, group each person in our report with others of the same age. We dont need to do this

for this particular example, but it is certainly a useful feature that we might want to learn moreabout later. But for now, just click next.

4. Record Sort Order

Page three of the wizard is where you determine what order the records are displayed in yourreport. So for example you might want to display records in ascending order of age. For this


22/23

example, however, we are going to put your records into alphabetical order for SURNAME and

FIRSTNAME. Begin by clicking the top drop down box and selecting SURNAME, and in the

box 2 below select FIRSTNAME. This means that records are sorted alphabetically by surname,and if two surnames are the same, the FIRSTNAME is used to determine which record comes

first etc.

Click Next

5. Report Lay Out

This page of the Wizard is where you set the lay out for your report. There are various lay out

options, but in our case we shall keep to the default setting of TABULAR.

Click next.

6. Style

For style, select Access 2007 from the list and click next.


23/23

7. Name of Report

Name your report REPORT1 and then click FINISH.

Your access report will now be displayed on the screen, and should look something like this:

This is the end of the tutorial. I hope this has given you a basic foundation in AccessDevelopment Skills. If you would like to take your study of Access 2007 further, please check

out my Advanced Access 2007 Tutorials and Access Tips Blog. If you have any queries about

my Access 2007 Tutorial, or my work as an Access Developer, please contact me [email protected] - or catch up with me on the Access 2007 Tutorial Facebook

Page. I will do my best to help. Thank you.
http://ms-access-tips.blogspot.com/p/advanced-access-2007-tutorials.htmlhttp://ms-access-tips.blogspot.com/http://www.facebook.com/pages/Access-2007-Tutorial/201397826545638#%21/pages/Access-2007-Tutorial/201397826545638?sk=wallhttp://www.facebook.com/pages/Access-2007-Tutorial/201397826545638#%21/pages/Access-2007-Tutorial/201397826545638?sk=wallhttp://www.facebook.com/pages/Access-2007-Tutorial/201397826545638#%21/pages/Access-2007-Tutorial/201397826545638?sk=wallhttp://www.facebook.com/pages/Access-2007-Tutorial/201397826545638#%21/pages/Access-2007-Tutorial/201397826545638?sk=wallhttp://ms-access-tips.blogspot.com/http://ms-access-tips.blogspot.com/p/advanced-access-2007-tutorials.html

Documents

Tutorial Access 2007 Database