Tutorial: Configuring Your Microphone Duke University School of
Nursing
Slide 3
If you want a short cut follow this Summary otherwise continue
to the next slide to listen to the tutorial. 1.Plug microphone into
mic-jack 2.Go to START button then select CONTROL PANEL from the
toolbox 3.Select SOUND from the control panel toolbox 4.Select
RECORDING from the menu on the top of the toolbox 5.Select
MICROPHONE then the CONTINUE button on the bottom 6.Select SET UP
MICROPHONE option 7.Select the style of microphone you will use
8.Select the NEXT button on the bottom 9.Select the NEXT button
again 10.Read the sentence on the screen into the microphone
11.When highlighted, select the NEXT button on the bottom 12.Close
the toolbox by selecting the X in the upper right corner 13.Proceed
to the PowerPoint Narration tutorial
Slide 4
Getting Ready Plug microphone into mic-jack If this is the
first time you have used a microphone on your system, follow these
simple steps to configure your system with your microphone.
Slide 5
Getting Ready Click the START button Select CONTROL PANEL
Slide 6
Configuring Your Microphone Select SOUND
Slide 7
Configuring Your Microphone 1. Select RECORDING 2. Select
Microphone