Form code: TA 1411a Revision: 2014-11 www.dnvgl.com Page 1 of 7 © DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.

TYPE APPROVAL CERTIFICATE

Certificate No: A-14140 File No: 861.50 Job Id: 262.1-010778-2

This is to certify: That the Remote Control System, Propulsion, Thruster and Steering with type designation(s) Electronic Vessel Control System "EVC" Issued to

AB Volvo Penta GÖTEBORG, Sweden is found to comply with Det Norske Veritas' Rules for Classification of High Speed & Light Craft Application : EVC System is intended for use only in multi-propulsion plants installations for High Speed, Light Craft vessels with lenght less than 30m. Location classes: See Product description on page 2.

This Certificate is valid until 2016-06-30. Issued at Høvik on 2015-04-21

DNV GL local station: Gothenburg Approval Engineer: Andreas Torp Karlsen

for DNV GL

Odd Magne Nesvåg

Head of Section

This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid. The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.

Certificate No: A-14140

File No: 861.50 Job Id: 262.1-010778-2

Form code: TA 1411a Revision: 2014-11 www.dnvgl.com Page 2 of 7

Product description Volvo Penta Electronic Vessel Control System, type EVC, consisting of following units: EVC System component hardware list and location classes Component name HW

number Temp- erature

Humid-ity

Vibration

EMC Enclosure

Helm Control Unit (HCU), Stand alone *)

21321165 D B A B C

Helm Control Unit (HCU), Stand alone**)

22296680 D B A B C

Powertrain Control Unit (PCU) 21339308 A B B B C Powertrain Control Unit (PCU) 21469062 A B B B C Powertrain Control Unit (PCU) 22373011 A B B B C EVC Control Panel 21310176 D B A B C 1) EVC Color Display 7” 22369181 D B A B B EVC Color Display 7” (IP67) 22499546 D B A B C Alarm Display 7” (AD) 22324778 D B A B B Alarm Display 7” (AD) (IP67) 22499393 D B A B C Steering Gear Display 7” (SG) 22324777 D B A B B Steering Gear Display 7” (SG)(IP67) 22499421 D B A B C Info display 2,5” 22480957 D B A B C 1) Generic button panel 22480958 D B A B C 1) Servo unit Steering (SUS2) 22547384 A B B B C Steering Unit (SU) 21469548 D B A B C 1) Information Gateway (IGW) 22313303 A B A B C Autopilot gateway 3889760 A B A B C Joystick 22498703 A B A B C Control lever with integrated HCU units, single **)

22296420 D B A B C 1)

Control lever with integrated HCU units, twin **)

22296098 D B A B C 1)

Control lever with integrated HCU units, twin (IS) ***)

21847106 D B A B C 1)

Control lever, single 21164027 D B A B C 1) Control lever, twin 21164029 D B A B C 1) Independent rudder angle sensor (IRS)

22394967 A B B B C

Power Module (PM) 21622040 Covered by Type Approval Certificate A-13306 1) Shall be mounted according to Volvo Penta instructions EVC System component software version Component name Configured for

engine HW number SW

number Helm Control Unit (HCU) – Core *) D16 21321165 22008592 Helm Control Unit (HCU) – Core **) D9 21847105 22360584 Helm Control Unit (HCU) – Core **) & ***) D11/D13 21847105 22389744 Powertrain Control Unit (PCU) D16 21339308 22064826 Powertrain Control Unit (PCU) D9 21469062 22362974 Powertrain Control Unit (PCU) D11/D13 22373011 22389748 Alarm Display 7” (AD) D11/D13 22324778 22324778 Alarm Display 7” (AD) (IP67) D11/D13 22499393 22499393 Steering Gear Display 7” (SG) D11/D13 22324777 22324777 Steering Gear Display 7” (SG)(IP67) D11/D13 22499421 22499421 Generic button panel D9/D11/D13/D16 21846925 Servo unit Steering (SUS2) D11/D13 22547384 22579566

Certificate No: A-14140

File No: 861.50 Job Id: 262.1-010778-2

Form code: TA 1411a Revision: 2014-11 www.dnvgl.com Page 3 of 7

Steering Unit (SU) D11/D13 21469548 21469548 Information Gateway (IGW) D9/D11/D13/D16 22313303 22313303 Autopilot gateway D9/D11/D13/D16 3889760 3889760 Independent rudder angle sensor (IRS) D11/D13 22394967 22394967

Limitation

- Only for multi-propulsion plant installations - Volvo Penta vessel positioning system is not covered by this Type Approval Certificate - For vessel not longer than 30m - Tool set for manual local steering control of SUS unit shall be provided for every propulsion line

and kept in steering gear compartment - Not for Category B Craft in meaning of HSC 2000 - Not suitable for any DYNPOS notation - Not suitable for RPS notation - For RP notation system shall be evaluated on case-by-case basis for specific project

Approval conditions The following documentation of the actual application is to be submitted for approval in each case:

- Reference to this Type Approval Certificate - Reference to relevant valid DNV Type Approval Certificate for hardware components not covered

by this certificate - Functional description - System block diagram - Power supply arrangement (may be part of the System block diagram) - List of control & monitored points (including alarms and safety actions, with setpoints) - Test program for certification

The Type Approval covers hardware and software listed under Product description. Product certificate Each delivery of the application system is to be certified according to Pt.4 Ch.9 Sec.1. The certification test is to be performed at the manufacturer of the application system before the system is shipped to the yard. After the certification the clause for application software control will be put into force. This certificate is valid for subsequent versions of software and firmware, provided the modifications are performed using the Volvo Penta change control process, and appropriate configuration management is maintained. Major changes are to be notified to DNV and documents submitted to demonstrate compliance with this certificate (i.e. changes that affect safety, result in additional functionality or a wider scope of certification). Clause for application software control All changes in software are to be recorded as long as the system is in use on board. The records of all changes are to be forwarded to DNV for evaluation and approval. Major changes in the software are to be approved before being installed in the computer. Type Approval documentation Ring binder “D-12 Electrical System” containing: Technical file System Architecture Description HWRS Power Module HWRS CIU HWRS EMS HWRS Display HWRS Shutdown unit HWRS PCU HWRS HCU

Certificate No: A-14140

File No: 861.50 Job Id: 262.1-010778-2

Form code: TA 1411a Revision: 2014-11 www.dnvgl.com Page 4 of 7

Type Test EMS and PM (DNV) Type Test EMS and PM (SP) Type Test EVC system Type Test Display and CIU GA drawings Ring Binder “Supplemental Documentation for Type Approval of D12 Engine including Electrical System & SDU” dated 2003-08-21, containing: Type Test EVC/ PCU, HCU (DNV) Type Test magnetic safe distance (SP) Type Test PCU (G1) and HCU (SP) Type Test EVC (Semcon) Verification Report (CPAC) 6. & 7. Drawings 3813564/5 Volvo Corporate Standard STD 7611,131 Requirement Specification (SDU) 61427 dated 2003-05-02 Product Test Specification (SDU) 61474-2 dated 2003-01-28 Installation Instructions (SDU) 61475-1.3 dated 2003-01-28 Drawings: 3586011/12, 893349/50/51 Test reports: DNV: 2003-3156 Rev. 01, 2002-0707 Rev. 01 Ring Binder: Technical file, Diesel Engine Control System, Type EMS “Extension of Type Approval Certificate”, containing: Change Description Diesel Engine Control System, Type EMS, Doc. No. 47870-CL0532, issue 01 System Requirement Specification (SRS) for classifiable marine engines: Doc.No. 67428-2, issue 02 SRS System Requirement Specification: Doc. No. 66594-1.8, issue 1.10 SAD – System Architecture Description Classifiable Electric System: Doc. No. 61203-5, issue 05 General arrangement drawings: Doc. Nos. 893384, issue 01, 893385, issue 01 SAD – System Architecture Description for Engine Mounted el. System Classifiable Marine Engines, Doc. No. 67688-1, issue 01 System Architecture Description Marine Commercial Control, Doc. No. 67710-1, issue 01 Type Test Reports: EMC/Environmental Type Test Engine Management system 2 + Power Module: Doc. No. 2004-3217, issue 01 Type Test of Electronic Vessel Control System, Type EVC-B: Doc. No. 2004-3347, issue 02 Type Test of Marine Commercial Control, Testreport 402956-01/01, Testreport 402975-01/01 *) Sensors, alarms and set-points: Doc. No. 47870-C10539, issue 01 Functionality test of a certified EVC propulsion installation: Doc. No. 67621, issue 1.2 Functionality test of a certified AUX installation, Doc. No. 35120, issue 03 General arrangement Drawings: Drawing No. 893384: Wiring Diagram – D9 AUX MCC Drawing No. 893395: Wiring Diagram – D9 EME MCC Drawing No. 893396: Wiring Diagram – D9 COMB MCC Drawing No. 893385: Wiring Diagram – D9 PROP EVD Drawing No. 893397: Wiring Diagram – D9 PROP MCC Drawing No. 893387: Wiring Diagram – D12 AUX MCC Drawing No. 893399: Wiring Diagram – D12 EME MCC Drawing No. 893400: Wiring Diagram – D12 COMB MCC Drawing No. 893342: Wiring Diagram – D12 PROP EVD Drawing No. 893398: Wiring Diagram – D12 PROP MCC Renewal 2007: 893412 Rev. 03 – GA drawing MCC System AUX – EME – Combined – PROP 893385 Rev. 03 – General Arrangement Prop EVC

Certificate No: A-14140

File No: 861.50 Job Id: 262.1-010778-2

Form code: TA 1411a Revision: 2014-11 www.dnvgl.com Page 5 of 7

Renewal / extension 2012 documentation (after splitting engine C&M system “EMS” and thruster, propulsion, steering C&M system “EVC”: Document name Doc-no. Issue Change description diesel engine control system, type EMS CL0765 02 System requirement specification (SRS) for classifiable marine engines.

67428-4 04

SRS System requirement specification IPS. 61731-3 03 SAD – System architecture description EVC system. GA-Drawing D12 MCC AUX/EME/CMB/PROP. GA-Drawing MCC system D9 AUX/EME/CMB/PROP D16 EME/CMB(not AUX/PROP). GA-Drawing D16 MCC AUX/PROP(not EME/CMB)

C-PAC 893413 893412 21252880

PA5 03 04 03

GA-Drawing PROP EVC D9/D16 893385 05 GA-Drawing PROP EVC D13. ( with SUS/SU, display 7” ) (Replacing 21355566)

21967031 01

GA-Drawing D13 MCC AUX/EME/CMB/PROP. 21255563 04 Engineering report D13 EMS, EVC-D Type test 142272-1 01 EVC-D1 FMEA SVN B Additional and revised documents for type approval EVC CL0782 01 Drawing Rudder indicator IPS3 sensor unit and ECU 21911278 01 Functional requirement specification for the display for commercial applications

FRS-display PA10

Additional and revised documents for type approval EVC CL0783 01 EMC test on PCU FX110613-E1 - FRS Station handling EVC ASC RS PA17 EVC Power supply distribution strategy for classified installations

EVC power supply strat

-

System requirement specification EVC EVC RS SRS EVC - Electrical system witness test add tests 31 May 2012 48240TT-05 - Additional and revised documents for type approval EVC CL0784 01 Cable harness Power Supply IPS2 3594041 03 Cable Harness Power Supply IPS2 4.5 meter 3594043 02 Grouping os steering displays alarms - 01

Test report name: Doc-no. Issue EMC / Environmental testing of EMS2.2 Complement to the EVC-D type approval test reports EMC test of the EVC-D1019 EMC test of the complete system Environmental test of the EVC system Salt mist test Protection against accidental access to dangerous voltage Protection against rain and spray Determination of compass safe distance for a magnetic and electric equipment Sound level from an alarm signal Rain test on the EVC colour display box, IP X5 Classification of degree of protection provided by enclosure

2010–3223 1019-1 FX001958B FX001958 PX00809-001 PX00809-04 PX00809-01:A PX00809-01:B MTkPX00809-02 EtaPX00809 45/0363-FCX90112/9 P704426-01 P704426-02

Rev2 A Rev1 RevA

Certificate No: A-14140

File No: 861.50 Job Id: 262.1-010778-2

Form code: TA 1411a Revision: 2014-11 www.dnvgl.com Page 6 of 7

Salt spray test Environmental tests on SUS 2 Needle flame test LG Chem Polykemi Du Pont GE plastics Bayer Lyondellbasell Taiwan Qimei Industry Stock Co. LTD Ginar Henkel

P704426 report F908520

Environnemtal testing of rudder sensor PX20946ENV 120322 EMC tests of rudder angle system IPS3. Additional comments burst test.

PX20946EMC 18149301

120319 01

EMC test on PCU FX110613-E1 - Classification of degree of protection by enclosure FX200058A

PX10622-03 -

E10 type tests of two PCU2 Environmental tests of two PCU-2 Needle flame test Salt mist test

PX10622_A PX10622_B PX10622-02 PX10622-5

- - - -

Renewal and extension 2015: Title Drawing no. Revision / Date Change Description Electronic Vessel Control System “EVC” CL0812 02 / 2014-12-11 AD and SG Functional Description - B / 2014-12-05 General Arrangement 22393856 01 EVC System component hardware and location classes - 6 Design Verification Test Procedure – Twin D13 / IPS3 SEM 14_003 B Classification of degree of protection provided by enclosure (EVC Color Display 7”)

4F014605:C 2014-11-07

EMC test of Joystick DPS Deluxe w. Hall sensor 4P02620E1 2012-04-29 Compass Safe Distance test of Joystick DPS Deluxe w. Hall sensor

4P02620 CSD 2014-04-28

Classification of degree of protection provided by enclosure (EVC Color Display 7”)

5F001278 2015-02-18

Tests carried out Applicable tests according to Standard for Certification No. 2.4, April 2006. For the Helm Station Controller (HCU) the ‘Compass safe distance’ was measured according to section 11.2 of IEC 60945 4th edition (2002). For the Joystick DPS Deluxe the ‘Compass safe distance’ was measured according to section 11.2 of IEC 60945 4th edition (2002) Function testing at Krossholmen, dated 2010-11-24. Function testing at Krossholmen, dated 2014-10-01. Periodical assessment The scope of the periodical assessment is to verify that the conditions stipulated for the type are complied with, and that no alterations are made to the product design or choice of systems, software versions, components and/or materials.

Certificate No: A-14140

File No: 861.50 Job Id: 262.1-010778-2

Form code: TA 1411a Revision: 2014-11 www.dnvgl.com Page 7 of 7

The main elements of the assessment are: · Ensure that type approved documentation is available · Inspection of factory samples, selected at random from the production line (where practicable) · Review of production and inspection routines, including test records from product sample tests and

control routines · Ensuring that systems, software versions, components and/or materials used comply with type

approved documents and/or referenced system, software, component and material specifications · Review of possible changes in design of systems, software versions, components, materials and/or

performance, and make sure that such changes do not affect the type approval given · Ensuring traceability between manufacturer’s product type marking and the type approval certificate

Periodical assessment is to be performed at least every second year and at renewal of this certificate. END OF CERTIFICATE 0