u } P } µ } + X · BR016 2 Knot Splash Brush Stock Code Description CL001 Artificial Sponge Stock Code Description BR010 3 Row Wire Brush BR011 4 Row Wire Brush BR013 3 Row Stainless

Our fully responsive website makes it easyto browse and buy online

Email: [email protected]: www.harbrosupplies.com

Tel: 01388 605363 / 605353Fax: 01388 603263 Supplies Ltd.Supplies Ltd.

Tel: 01388 605363 / 605353Fax: 01388 603263

ContentsCleaning Products - Brushes & Sponges 01-03 Sil icon CarbidePersonal Protec on Equipment - Flat Sanding, Semi-Flexible Spiracuts, Paper Discs 45 - Gloves & Aprons 04-05 - Paper Sheets, Rubbing Bricks/Blocks & Cup Wheels 46-47 - Dust Masks & Ear Protec on 06-08 Synthe c Abrasives - Eye & Footwear 09 - Edging Wheels & Frankfurt Segments 47Fixing Products - Munchen, Morden 48 - Ground Anchors & Dowels 10-11 An que Brushes 48 - Rapid Epoxy, Spacers & Scrapers 11 Polishing Wax & Compounds 49-50 - Adhesive & Sealers, Applica on Guns 12-13 Lantania Stone Treatments 51-52Flower Containers & Vases 14 Stone Glue Polyester Resin - Stonebond & Colouring Pigments 53Marking and Measuring Pneuma c Hammers, Fi ngs & Compressors 54 - Squares & Bevels 15 Steel Tooling - Folding Rules, Spirit Level & Tape Measures 16 - X Quality Steel Tools 55 - Straight Edges & Rules 17 - Guil let Steel Tool Kits 56 - Compass, Scribes & Trammel 18 - Claw Tool Holders & Bits, Gouges & Carving Claws/Chisels 57 - Template Material 18 Tungsten Tooling - Depth Gauge, Pro le Master, Pencils & Crayons 19 - Tool Kits 58 - Paper Crayons, Paint Marker & Spray Paint 20 - Masonry Chisels 59-601 Shot Le ering Enamel Paint 21 - Le ering Chisels 61Paint Brushes & Fitches 22 - Le ering, Fishtail & Bullnose Chisels 62Knives & Blades 23 - Punches & Points 63Small Tools, Trowels & Hacksaws 24 - Claw Tools, Fine Claws & Pitchers 64Drags & Hand Sanders 25 - Dunters 65Ri ers & Files 26 Lead Le ering Dril l Bits 66Planes, Engravers & Turbine Grinder 27 Tool SharpeningDiamond Burrs, Tungsten Burrs & Pneuma c Pen 28 - Bench Grinder, Grinding Wheels & Sharpening Block 67Water Chucks & Tungsten Carbide Dril ls 29 - Kaindl Sharpening Machine 67Masking Tape - Paper and PVC 30 Diamond Polishing DiscsSandblas ng Stencil Tapes - Dry Polishing, Wet Polishing & Hybrid Discs 68-69 - Anchor Rubber Stencil 31 - Polishing Discs & Drums 70 - Quantum Vinyl 31 Diamond ToolingSandblas ng Products - Grit & Nozzles 32 - Hand Pads & Sheets, Files & Spindle Saws 71Dustless Sandblasters - Rasant 470 & Taifun 500 33 - Cup Wheels 72Gilding Products - Gold Leaf, Size & Mops 34 - Plates & Routers 73-74Gilding Products & Machine Bits 35 - Dril ls & Cores 75Lead Le ering - Lead Wire, Lead Tape & Leading Mallets 36 - Pro ling Tools & Finger Routers 76Hammers & Mallets - Cores & Flu ng Wheels 77 - Club, Bouchard, Scutch & Punch Hammers 37 - Dry Cu ng Blades 78-79 - Walling Hammers, Masons Mallets & Le ering Hammer 38 - Wet & Dry Cu ng Blades & Mill ing Wheel 80 - Dummy Mallets, Dykers Hammer & Rubber Mallet 39 Electric PolishersWedges, Plugs & Feathers, Lewis Pins 40 - Flex & Harbro 81-82Backing Pads & Plates - Velcro, PSA, Nylon & Plates 41-43 - Core Dril l Motor & Stand 82Polishing Felts, S tched Mops & Bonnets 44 Oma System

- Auctor CP99, Antarex, Vega 4 & Hydraulic Gear Case 83

Bent wood handle, 254mm overall length.Filled bahia mix, suitable for use in hot water.For general cleaning and dust removal.

Churn Brush

.

Bannister Brush

Acid Brush

Nylon Scrub Brush

Fibre Scrub Brush

Stock Code DescriptionBR001 Churn Brush, 254mm

Stock Code DescriptionBR002 Bannister Brush, 290mm

Stock Code DescriptionBR003 25mm Acid BrushBR004 50mm Acid Brush

Stock Code DescriptionBR005 Nylon Scrubbing Brush, 216mm

Stock Code DescriptionBR006 Fibre Scrubbing Brush, 216mm

Cleaning Products


Tel: 01388 605363 / 605353Fax: 01388 60326301

Supplies Ltd.Supplies Ltd.

Cleaning Products


Tel: 01388 605363 / 605353Fax: 01388 603263 02


Hygienic Scrub Brush

Bronze/Nylon Scrub Brush

Wire Brushes

2 Knot Splash Brush

Stock Code DescriptionBR007 Blue Hygienic Scrubbing Brush, 209mm

Stock Code DescriptionBR008 Bronze/Nylon Scrubbing Brush

Stock Code DescriptionBR016 2 Knot Splash Brush

Stock Code DescriptionCL001 Artificial Sponge

Stock Code DescriptionBR010 3 Row Wire BrushBR011 4 Row Wire BrushBR013 3 Row Stainless Wire BrushBR014 4 Row Stainless Wire BrushBR015 4 Row Bronze Wire Brush

Cleaning Products


Tel: 01388 605363 / 605353Fax: 01388 60326303


Granite Cleaner

Pumice

Water Scraper

Stanley Scraper

Blue Roll

Stock Code DescriptionCL006 Stanley Scraper

Stock Code DescriptionCL002 Granite Cleaner, 3kgCL002A Granite Cleaner, 25kg

Stock Code DescriptionCL005 Pumice Blocks 3.111

Stock Code DescriptionSU073 Natural Pumice 1kg

Stock Code DescriptionCL009 Medium Water Scraper, 290mmCL007 Large Water Scraper, 350mmCL008 Jumbo Water Scraper, 400mm

Stock Code DescriptionWIPER 26P13 Blue Wiper Roll Single WIPER 3152 Blue Wiper Roll LargeWIPER 26P010 Blue Monster Roll Single


Tel: 01388 605363 / 605353Fax: 01388 603263 04


Size: 10

Superior Rigger Glove Yellow Criss-Cross Gloves

Thermal Grip Glove

Black PU Glove

Rubber Sandblast Gauntlets

Stock CodeGL002

Stock CodeGL003

Stock CodeGL004 Size 9GL005 Size 10

Stock CodeGL006 400mmGL007 600mm

Stock CodeGL009

Stock CodeGL001

Stock CodeGL008

Stock CodeGL025



PVC Sandblast Gauntlets

Latex Gloves Nitrile Gloves


Tel: 01388 605363 / 605353Fax: 01388 60326305


Rubber Aprons

Leather Apron

Stock Code DescriptionGL011 Vibra Guard Anti-Vibration Gloves, Size 8GL012 Vibra Guard Anti-Vibration Gloves, Size 9GL013 Vibra Guard Anti-Vibration Gloves, Size 10

Stock Code DescriptionGL015 Impact Pro Glove MediumGL016 Impact Pro Glove LargeGL017 Impact Pro Glove X Large

Stock Code DescriptionCL010 Rubber Apron, 1050mmCL011 Rubber Apron, 1200mm

CL0111A Apron Ties, 50mtr x 25mm

Stock Code DescriptionCL012 Leather Apron


Tel: 01388 605363 / 605353Fax: 01388 603263 06


3M Filters For 6000/7500 Half Masks

Moldex 1100 Dust Mask

Moldex 2405 FFP2 NR D Valved Mask

3M 6000 Series Half Mask

3M 7500 Series Half Mask

Stock Code DescriptionDU003 SmallDU002 MediumDU001 Large

Stock Code DescriptionDU006 SmallDU005 MediumDU004 Large

Stock Code DescriptionDU007 3M 2125 P2 Particulate Filter, Box of 20 filtersDU008 3M 2135 P3 Toxic Dust Filter, Box of 20 filters

Stock Code DescriptionDU010 Moldex 1100 Disposable Dustmasks

Stock Code DescriptionDU011A Moldex 2405 FFP2 Valved Mask, box of 20


Tel: 01388 605363 / 605353Fax: 01388 60326307


Moldex 2505 FFP3 NR D Valved Mask

Moldex 8000 Series Reusable Half Mask

Moldex P3 R D Replacement Filters

Moldex Service Kit for 8000 Mask

Moldex P2 R D Replacement Filters

Stock Code DescriptionDU013 Moldex 2505 FFP3 Valved Mask, Box of 10

Stock Code DescriptionDU015 Moldex 8000 Series Half Mask, MediumDU016 Moldex 8000 Series Half Mask, Large

Stock Code DescriptionDU017 P2 R D Filter for 8000 Mask (Single)

Stock Code DescriptionDU018 P3 R D Filter for 8000 Mask (Single)

Stock Code DescriptionDU020 Service Kit for 8000 Series Mask

f Mask


Tel: 01388 605363 / 605353Fax: 01388 603263 08


Branded ear plugs. Moldex Ear Plugs

Moulded disposable mask with valve.Warrior Respirator FFP2V

Warrior Respirator FFP3V

Moldex

Stock Code DescriptionEAR001 7700 Disposable Ear Plugs

EAR002 Rockets Full Detect Corded ReusableEAR003 Rockets Full Detect Un-Corded Reusable

Moldex

Stock Code DescriptionEAR005 Moldex M1 Premium Earmuff

Stock Code DescriptionEAR006 Moldex M2 Multi Position Earmuff

Stock Code DescriptionDU055 FFP2 Valved Respirator, box of 10

Stock Code DescriptionFFP3 Valved Respirator, box of 5DU056


Tel: 01388 605363 / 605353Fax: 01388 60326309


Polyamide frame with easily adjustable temples. Reinforced mineral glass lens. Our most popular specs.

Horizon Safety Specs

Deluxe Safety Goggle

Safety Wellington Boots C/W Steel Toe

Honey Nubuck Safety Boot

Strong and durable.

Face Shield

Stock Code DescriptionEYE001 Horizon Safety Glasses

Stock Code DescriptionEYE003 Deluxe Anti Mist Goggles

Stock Code DescriptionBT001 Safety Wellington Boot, Size 8BT002 Safety Wellington Boot, Size 9BT003 Safety Wellington Boot, Size 10BT004 Safety Wellington Boot, Size 11

Stock Code DescriptionEYE004 200mm Brow GuardEYE005 Polycarbonate Visor 230 mm

Stock Code DescriptionBOOT MMB36 6 Nubuck Honey Safety Boot, Size 6BOOT MMB36 7 Nubuck Honey Safety Boot, Size 7BOOT MMB36 8 Nubuck Honey Safety Boot, Size 8BOOT MMB36 9 Nubuck Honey Safety Boot, Size 9BOOT MMB36 10 Nubuck Honey Safety Boot, Size 10BOOT MMB36 11 Nubuck Honey Safety Boot, Size 11BOOT MMB36 12 Nubuck Honey Safety Boot, Size 12

16 Email: [email protected]: www.harbrosupplies.com

Tel: 01388 605363 / 605353Fax: 01388 603263 10


Fixing Products Memorial

Cut to size, washed, degreased and deburred.Manufactured from high grade stainless steel, conforming to trade standard

Plain Stainless Steel Dowels

Cut to size, washed, degreased and deburred.Manufactured from high grade stainless steel, conforming to trade standard

Threaded Stainless Steel Dowels

Ground Anchor Fixings

Stock Code DescriptionDOW001 50mm x 6mm PlainDOW035 75mm x 6mm PlainDOW002 50mm x 10mm PlainDOW003 75mm x 10mm PlainDOW004 100mm x 10mm PlainDOW005 125mm x 10mm PlainDOW006 150mm x 10mm PlainDOW007 50mm x 12mm PlainDOW008 75mm x 12mm PlainDOW009 100mm x 12mm PlainDOW010 125mm x 12mm PlainDOW011 150mm x 12mm PlainDOW012 175mm x 12mm PlainDOW013 200mm x 12mm PlainDOW014 75mm x 16mm PlainDOW015 100mm x 16mm PlainDOW016 125mm x 16mm PlainDOW017 150mm x 16mm PlainDOW0171 155mm x 16mm PlainDOW018 175mm x 16mm PlainDOW019 200mm x 16mm PlainDOW020 225mm x 16mm PlainDOW021 275mm x 16mm Plain

Stock Code DescriptionDOW025 75mm x 12mm ThreadedDOW026 100mm x 12mm ThreadedDOW027 125mm x 12mm ThreadedDOW028 150mm x 12mm ThreadedDOW029 100mm x 16mm ThreadedDOW030 125mm x 16mm ThreadedDOW031 150mm x 16mm ThreadedDOW032 175mm x 16mm ThreadedDOW033 200mm x 16mm ThreadedDOW034 200mm x 20mm Threaded

Stock Code DescriptionFX001 250x25mm Solid Anchor Type CFX002 350x25mm Solid Anchor Type CFX003 600x25mm Solid Anchor Type AFX004 750x25mm Solid Anchor Type DFX005 250mm Hollow Ground AnchorFX006 350mm Hollow Ground AnchorFX007 600mm Hollow Ground Anchor

volumediscountavailable

volumediscountavailable

Sold in metre lengths

Sold in metre lengths

Plain Stainless Steel Dowelling Rod

Threaded Stainless Steel Dowelling Rod

Stock Code DescriptionDOW050 1mtr x 6mm PlainDOW051 1mtr x 10mm PlainDOW052 1mtr x 12mm PlainDOW053 1mtr x 16mm PlainDOW054 1mtr x 20mm PlainDOW055 1mtr x 25mm Plain

Stock Code DescriptionDOW060 1mtr x 6mm ThreadedDOW061 1mtr x 10mm ThreadedDOW062 1mtr x 12mm ThreadedDOW063 1mtr x 16mm ThreadedDOW064 1mtr x 20mm ThreadedDOW065 1mtr x 24mm Threaded

Stock Code Description

Stock Code DescriptionSU055 20x100x1mm Spacers/Packers 1000SU056 24x100x1mm Spacers/Packers 1000SU057 26x100x1mm Spacers/Packers 1000

SU057A 26x100x3mm Spacers/Packers 1000SU058 28x100x1mm Spacers/Packers 1000

Stock Code DescriptionSU059 37mm Mastic ScraperSU060 50mm Mastic ScraperSU061 75mm Mastic Scraper

Stock Code DescriptionSU080 Arboseal GZ Tape Black Pack Of 4

RE051 Stick 2 Rapid Epoxy Tube 12ml x 2RE052 Stick 2 Rapid Epoxy Syringe 24ml



Tel: 01388 605363 / 605353Fax: 01388 603263 12


Fixing Products General Harbro No.24 Strongbond Adhesive

MEMFIX Chemical Anchor System

Stock Code DescriptionRE014 Black Strongbond, 290mlRE017 Clear Strongbond, 290ml

Stock Code DescriptionRE030 Memfix Chemical Anchor, 380mlSU067 Spare Nozzle for Memfix, Pack of 5

Stock Code DescriptionSU065 300ml Adhesive Application GunSU068 300ml Adhesive Application Gun PremierSU066 380ml Adhesive Application Gun


Tel: 01388 605363 / 605353Fax: 01388 60326313


Fixing Products General

Premium Silicone 450

Silicon Wipes

Stock Code DescriptionRE019 Profi Cleaner, 500ml

Stock Code DescriptionRE031 Stainless Wire, 0.5mm, 22.5mtrsRE032 Braided Wire, 0.8mm, 22.5mtrs

Stock Code DescriptionRE033 D Handles

Stock Code DescriptionCL016 Wonder Wipes

Stock Code Description450BK Premium Silicone 450 Black 310ml450WE Premium Silicone 450 White 310ml450TR Premium Silicone 450 Clear 310ml

Stock Code DescriptionSTIXBK Stixall Extreme Power Black 300mlSTIXWE Stixall Extreme Power White 300ml

STIXCLEAR Stixall Extreme Power Crystal Clear 300ml


Tel: 01388 605363 / 605353Fax: 01388 603263 14


Flower Containers & VasesHarbro Aluminium Flower Containers

Aluminium Flower Containers

Green Star Vase

Unit Pack Box1 12 144

Stock Code DescriptionAFC005 5.5" x 3.5" x 3" SilverAFC006 5.5" x 3.5" x 3" GoldAFC007 5.5" x 3.5" x 4" SilverAFC008 5.5" x 3.5" x 4" GoldAFC009 5.5" x 3.5" x 5" SilverAFC010 5.5" x 3.5" x 5" Gold`AFC011 5.5" x 3.5" x 6" SilverAFC012 5.5" x 3.5" x 6" Gold

Stock Code DescriptionAFC036 5” x 3” x 4” SilverAFC037 5” x 3” x 4” GoldAFC007A 5.5" x 3.5" x 4" SilverAFC008A 5.5" x 3.5" x 4" GoldAFC009A 5.5" x 3.5" x 5" SilverAFC010A 5.5" x 3.5" x 5" GoldAFC011A 5.5" x 3.5" x 6" SilverAFC012A 5.5" x 3.5" x 6" Gold

Unit Pack Box1 12 144

Stock Code DescriptionAFC071 Pack of 5

Stock Code DescriptionAFC070 Pack of 2


Tel: 01388 605363 / 605353Fax: 01388 60326315


Marking & Measuring Products

Quality steel square, available in a range of sizes.Steel Square

Wood Handled Try Squares

230mm Sliding Bevel

Stock Code DescriptionMAS001 Steel Square 300mm x 200mmMAS002 Steel Square 450mm x 300mmMAS003 Steel Square 600mm x 450mmMAS004 Steel Square 900mm x 600mm

Stock Code Description MAS005 Steel Rafter Square, 620mm x 450mm

Stock Code DescriptionMAS009 300mm Stanley Combi SquareMAS009A 300mm Surfacemaster Combi Square

Stock Code DescriptionMAS010 230mm Sliding Bevel

Stock Code DescriptionMAS006 150mm Wood Handled Try SquareMAS007 225mm Wood Handled Try SquareMAS008 300mm Wood Handled Try Square


Tel: 01388 605363 / 605353Fax: 01388 603263 16


Marking & Measuring Products

Stock Code DescriptionLEVEL001 1mtr Stabila Spirit Level

1000mm Stabila 83S Professional Level

Stock Code DescriptionMAS065 600mm Budget Spirit LevelMAS066 900mm Budget Spirit Level

Budget Spirit Level

Fisco Yellow ABS Handyman's Rule

Stock Code DescriptionMAS027 1 mtr Nylon Rule Yellow

Stanley White Long Life Rule

Stock Code DescriptionMAS028 1 mtr Nylon Rule White

Budget Measuring Tapes

Stock Code DescriptionMAS184 3mtr x 16mm Budget Measuring Tape

MAS184A Box Of 12 (3mtr x 16mm Budget Measuring Tape) MAS034 5mtr x 19mm Budget Measuring Tape

MAS034A Box Of 12 (5mtr x 19mm Budget Measuring Tape)MAS035 7.5mtr x 25mm Budget Measuring Tape

MAS035A Box Of 6 (7.5mtr x 25mm Budget Measuring Tape)

23Email: [email protected]: www.harbrosupplies.com

Tel: 01388 605363 / 605353Fax: 01388 60326317


Draper Expert Stainless Rule

Stock Code DescriptionMAS240 150mmMAS241 300mmMAS242 600mmMAS243 1000mm

Marking & Measuring ProductsMaun Straight Edge

Steel Straight Edge

Stock Code DescriptionMAS020 750mm Maun Steel Straight EdgeMAS021 900mm Maun Steel Straight EdgeMAS022 1200mm Maun Steel Straight Edge

Stock Code DescriptionMAS023 1 mtr Steel Straight EdgeMAS024 1.2 mtr Steel Straight EdgeMAS025 1.5 mtr Steel Straight EdgeMAS026 2 mtr Steel Straight Edge

Stock Code DescriptionMAS029 150mm Stainless Rule FiscoMAS030 300mm Stainless Rule FiscoMAS031 600mm Stainless Rule FiscoMAS032 1000mm Stainless Rule Fisher

Fisco / Fisher Stainless Rule

Draper Aluminium Rule

Stock Code DescriptionMAS014 150mm Draper Aluminium RuleMAS015 300mm Draper Aluminium RuleMAS016 600mm Draper Aluminium RuleMAS017 1000mm Draper Aluminium Rule


Tel: 01388 605363 / 605353Fax: 01388 603263 18


Marking & Measuring ProductsTungsten Wing Compass

Tungsten Scriber

Tungsten 4mm Pecker

Box Trammel

Template Material (White Transparent)

Stock Code DescriptionMAS037 150mm Tungsten Tipped Wing CompassMAS038 200mm Tungsten Tipped Wing CompassMAS039 250mm Tungsten Tipped Wing CompassMAS040 300mm Tungsten Tipped Wing CompassMAS041 500mm Tungsten Tipped Wing Compass

Stock Code DescriptionMAS042 Tungsten Scriber

Stock Code DescriptionMAS125 Tungsten 4mm Pecker

Stock Code DescriptionTEMP005 1200mm x 75mtrs PVC Template Material

Stock Code DescriptionMAS044 Tungsten Tipped Box Trammel

Trammel Head (Eclipse)

Stock Code DescriptionMAS045 Trammel Heads


Tel: 01388 605363 / 605353Fax: 01388 60326319


Marking & Measuring ProductsMoore & Wright Masons Depth Gauge

Chinagraph Pencils

Pencils

Stock Code DescriptionMAS046 Masons Depth Gauge 0-150mm

Stock Code DescriptionMAS047 150mm Contour GaugeMAS048 400mm Profile MasterMAS049 1000mm Profile Master

Stock Code DescriptionMAS052 Black Chinagraph Pencils, Box of 12MAS053 White Chinagraph Pencils, Box of 12MAS054 Red Chinagraph Pencils, Box of 12MAS055 Yellow Chinagraph Pencils, Box of 12

Cosmic Crayons

Stock Code DescriptionMAS056 Black Cosmic Crayons, Box of 12MAS057 White Cosmic Crayons, Box of 12MAS058 Red Cosmic Crayons, Box of 12MAS059 Yellow Cosmic Crayons, Box of 12

Stock Code DescriptionMAS050 HB Pencils, Box of 12MAS051 10H Pencils, Box of 12


Tel: 01388 605363 / 605353Fax: 01388 603263 20


Marking & Measuring ProductsPaper-wrapped wax marker for use on high gloss surfaces. Supplied in boxes of 12.

Paper Covered Crayons

Paint Marker Pens 750 & 751

Painters Touch Spray Paint (400ml)

Stock Code DescriptionMAS060 Black Papercovered Crayons, Box of 12MAS061 White Papercovered Crayons, Box of 12MAS062 Red Papercovered Crayons, Box of 12MAS063 Yellow Papercovered Crayons, Box of 12

Stock Code DescriptionMAS070 White Edding Paint Pen 750, 2-4mm nibMAS071 Red Edding Paint Pen 750, 2-4mm nibMAS072 Yellow Edding Paint Pen 750, 2-4mm nibMAS073 White Edding Paint Pen 751, 1-2mm nibMAS074 Red Edding Paint Pen 751, 1-2mm nibMAS075 Yellow Edding Paint Pen 751, 1-2mm nib

Stock Code DescriptionPNT010A Plasti-Kote Spray Paint Gloss Black 1282PNT011A Plasti-Kote Spray Paint Gloss White 1286PNT012A Plasti-Kote Spray Paint Metal Silver 621PNT013A Plasti-Kote Spray Paint Metallic Gold 620PNT014 Plasti-Kote Spray Urethane Gloss 591PNT015A Plasti-Kote Spray Paint Chrome 161PNT016 Plasti-Kote Spray Paint Primer Grey 10601

Metal Protekt can be used on both interior and exterior surfaces and

Stock Code DescriptionPNT010 Gloss Black 400mlPNT011 Gloss White 400mlPNT012 Metal Silver 400mlPNT013 Metal Gold 400mlPNT015 Metal Chrome 400ml

Stock Code DescriptionPNT001 250ml Ardenbrite Protective GlazePNT002 500ml Ardenbrite Protective Glaze


Tel: 01388 605363 / 605353Fax: 01388 60326321


Stock Code One Shot Description Paint CodeONE001 Metallic Brass 111-LONE002 Metallic Gold 109-LONE003 Metallic Silver 193-LONE004 Lettering Black 199-LONE005 Dark Brown 115-LONE006 Lettering White 101-LONE007 Primrose Yellow 130-LONE008 Chrome Yellow 134-LONE009 Bright Red 104-LONE010 Fire Red 102-LONE011 Chamois 118-LONE012 Dark Green 148-LONE013 Emerald Green 142-LONE014 Medium Green 144-LONE015 Medium Grey 195-LONE016 Maroon 108-LONE017 Lemon 132-LONE018 Process Blue 153-LONE019 Dark Blue 158-LONE020 Light Blue 152-LONE021 Reflex Blue 155-LONE022 Ivory 116-LONE023 Polar White 103-L

Stock Code One Shot Description Paint CodeONE024 Orange 124-LONE025 Vermillion 100-LONE026 Rubine Red 105-LONE027 Tan 117-LONE028 Imitation Gold 101-LONE029 Violet 160-LONE030 Magenta 163-LONE031 Dark Magenta 164-LONE032 Coral 120-LONE033 Salmon Pink 168-LONE034 Medium Brown 114-LONE035 Purple 162-LONE036 Proper Purple 161-LONE037 Brilliant Blue 156-LONE038 Process Green 143-LONE039 Aqua 149-LONE040 Blue Green 150-LONE041 Kansas City Teal 157-LONE042 Robin Egg Blue 151-LONE043 Peacock Blue 154-LONE044 Kool Crimson 106-LONE045 Sublime Green 141-LONE046 Metallic Copper 110-L



22

Paint BrushesRed american shaped handle, pure black bristle, nickel plated ferruledesigned for the professional user.

Decorators Paint Brushes

Pony Hair Pencil Paint Brush

Kolinsky Sable Pencil Paint Brush

Stock Code DescriptionBR020 12mm Paint BrushBR021 25mm Paint BrushBR022 37mm Paint BrushBR023 50mm Paint Brush

Stock Code DescriptionBR030 No.0 Pure Sable BrushBR031 No.1 Pure Sable BrushBR032 No.2 Pure Sable BrushBR033 No.3 Pure Sable BrushBR034 No.4 Pure Sable BrushBR035 No.5 Pure Sable BrushBR036 No.6 Pure Sable Brush

Stock Code DescriptionBR040 Pencil Paint Brush No. 0BR041 Pencil Paint Brush No. 1BR042 Pencil Paint Brush No. 2BR043 Pencil Paint Brush No. 3BR044 Pencil Paint Brush No. 4BR045 Pencil Paint Brush No. 6

Long round wooden handle, pure white bristle with aluminium ferrule.Hogs Hair Fitch Industrial

Stock Code DescriptionBR050 No. 2 Hogs Hair FitchBR051 No. 4 Hogs Hair FitchBR052 No. 6 Hogs Hair FitchBR053 No. 8 Hogs Hair FitchBR054 No. 10 Hogs Hair FitchBR055 No. 12 Hogs Hair Fitch

These are round brushes with natural tapered ends set in seamless nickel-plated ferrules on long polished handles.

Hogs Hair Fitch Professional

Stock Code DescriptionBR060 No. 2 Professional Hogs Hair FitchBR061 No. 4 Professional Hogs Hair FitchBR062 No. 6 Professional Hogs Hair FitchBR063 No. 8 Professional Hogs Hair FitchBR064 No. 10 Professional Hogs Hair FitchBR065 No. 12 Professional Hogs Hair Fitch


Tel: 01388 605363 / 605353Fax: 01388 60326323


Knives & Blades

Zinc alloy body with a grooved surface for comfortable, assured holding

Knife supplied with an assortment of 5 blades

Stanley Knife 199

The one and only original Stanley retractable knife

Precision die cast zinc body both strong and lightweight

Stanley Knife 99E

Heavy Duty Trimming Knife

Stanley Type Trimming Knife Blades

Stock Code DescriptionMAS089 Stanley DP9 Snap Off KnifeMAS090 Stanley DP9 Snap Off Replacement Blades (10)MAS091 Stanley DP18 Snap Off KnifeMAS092 Stanley DP18 Snap Off Replacement Blades (5)

Stock Code DescriptionMAS080A Heavy Duty Trimming Knife

Stock Code DescriptionMAS084 Trimming Knife Blades, Pack of 5

Stock Code DescriptionMAS081 199 Fixed Blade Stanley Knife

Stock Code DescriptionMAS080 99E Retractable Blade Stanley Knife

Stanley Throwaway Knife

Stock Code DescriptionMAS088 Stanley Throwaway Knife

Precision Gripster

Stock Code DescriptionMAS095 Precision Gripster KnifeMAS101 100 x Blades for Precision Gripster Knife



24

Trowels, Small Tools & Hacksaws

strength.

RST Small Tools

Gauging TrowelStock Code Description

MAS130 175mm Gauging Trowel

Stock Code DescriptionMAS120 13mm Trowel & SquareMAS121 16mm Trowel & SquareMAS122 19mm Trowel & SquareMAS125 13mm Leaf & SquareMAS126 16mm Leaf & SquareMAS127 19mm Leaf & Square

Half tanged to hardwood handle. Steel ferrule.Stock Code Description

MAS135 100mm Pointing TrowelMAS136 125mm Pointing TrowelMAS137 150mm Pointing Trowel

steel blade.

Brick Layers Trowel

Ragni Bucket Trowel

Stock Code DescriptionMAS140 Ragni Bucket Trowel, 165mm Blade

300mm Eclipse Hacksaw

Stock Code DescriptionMAS160 300mm Eclipse Hacksaw CompleteMAS161 300mm 18 TPI Bimetal Hacksaw BladesMAS162 300mm 24 TPI Bimetal Hacksaw Blades

Stock Code DescriptionMAS138 250mm Bricklayers Trowel No. 5


Tel: 01388 605363 / 605353Fax: 01388 60326325


Drags & Hand Sanders

Dual sided tungsten rubbing block.

Overall sanding area 140mm x 51mm. Block made with 45 degree angle to

Flat & Wedge Tungsten Block

Dual sided tungsten rubbing block.Contoured Tungsten Block

Swop Block Sander

Stock Code DescriptionMAS115 Swop Block Complete With FeltMAS116 Swop Block Sheet XX Coarse 80GMAS117 Swop Block Sheet X Coarse 120GMAS118 Swop Block Sheet Coarse 180 GritMAS119 Swop Block Sheet Medium 220 Grit

Stock Code DescriptionMAS190 Sanding Block Flat 150x51mm CoarseMAS191 Sanding Block Flat 150x51mm X CoarseMAS192 Sanding Block Flat 150x51mm XX Coarse

Stock Code DescriptionMAS199 Sanding Wedge Block 150x51mm Coarse/Fine

Stock Code DescriptionMAS195 Sanding Contour Block 150x51mm CoarseMAS196 Sanding Contour Block 150x51mm X CoarseMAS197 Sanding Contour Block 150x51mm XX Coarse

Professional French Drag

English Steel Drag

Stock Code DescriptionDRAG015 English Steel Drag Fine (8 Teeth per Inch)DRAG016 English Steel Drag Medium (6 Teeth per Inch)DRAG017 English Steel Drag Coarse (3 Teeth per Inch)

Stock Code DescriptionDRAG032 30mm Flat Toothed Professional French DragDRAG034 50mm Flat Toothed Professional French DragDRAG037 80mm Flat Toothed Professional French DragDRAG040 30mm Flat Plain Professional French DragDRAG042 50mm Flat Plain Professional French DragDRAG045 80mm Flat Plain Professional French DragDRAG058 30mm Convex Toothed Professional French DragDRAG060 50mm Convex Toothed Professional French DragDRAG063 30mm Convex Plain Professional French DragDRAG065 50mm Convex Plain Professional French Drag



26

Tungsten Needle File Set

Tungsten File

Stock Code DescriptionMAS200 Tungsten Riffler File Set (5) 140x3mmMAS203 File Handle 3mm Collet

Stock Code DescriptionMAS201 Tungsten Needle File Set (5) 140mmMAS202 Tungsten Needle File Set (5) 180mmMAS203 File Handle 3mm Collet

Stock Code DescriptionMAS188 Tungsten File 230x38mm FineMAS189 Tungsten File 230x38mm Coarse

Stock Code DescriptionMAS221 Diamond Double Riffler Set Of 10

Profile 150mm Long 250mm Long660 MAS170 MAS171661 MAS170A MAS171A662 MAS170B MAS171B663 MAS170C MAS171C664 MAS170D MAS171D665 MAS170E MAS171E666 MAS170F MAS171F667 MAS170G MAS171G


Tel: 01388 605363 / 605353Fax: 01388 60326327


Planes, Engravers & Turbine GrinderStanley Surform Plane 250mm

Burgess Professional Engraver 240v

Hobby Mini Grinder 240v

Stock Code DescriptionMAS165 Stanley Surform Plane 250mm FlatMAS166 Stanley Surform Blade 10" 506 5-21-393MAS167 Stanley Surform Blade 10" 505 5-21-293MAS168 Stanley Surform Blade 10" 507 5-21-299

Stock Code DescriptionMAS175 Burgess Professional Engraver 240vMAS180 A2 Carbide Point

Stock Code DescriptionMAS175A Hobby Mini Grinder 240v

UT1070K Turbine Grinder

Stock Code DescriptionMC033A UT1070K Die Grinder 3mm Collet



28

Diamond Burrs Set of 30, 3mm Shank

Diamond Burrs Set of 20, 6mm Shank

Tungsten Burrs Set of 6, 6mm Shank

Tungsten Burrs, 6mm Shank

Stock Code DescriptionMC035 Cuturi Pneumatic PenMC036 Cuturi Points

Stock Code DescriptionBURR051 6mm Shank Diamond Burr Economy Set Of 20

Stock Code DescriptionTBURR Set of 6 Tungsten Burrs, 6mm Shank

Stock Code DescriptionBURR050 3mm Shank Diamond Burr Set Of 30

Stock Code DescriptionTBURR003 Rod 8mm T.C. Burr 6mm ShankTBURR004 Taper 6mm T.C. Burr 6mm ShankTBURR005 Drum 13mm T.C. Burr 6mm ShankTBURR006 Ball 20mm T.C. Burr 6mm ShankTBURR007 Cone 26mm T.C. Burr 6mm ShankTBURR008 Large Taper 20mm T.C. Burr 6mm Shank


Tel: 01388 605363 / 605353Fax: 01388 60326329


Water Chucks & Tungsten Carbide Drills

Straight Shank Water Chuck ½” BSP

Diagrit Water Chucks ½” BSP

Premium Plus Masonry Drills Speedster SDS+ Drills

Stock Code DescriptionCHUCK008 Small Straight Shank Water ChuckCHUCK009 Large Straight Shank Water Chuck

SDS+ Water Chuck ½” BSP

Stock Code DescriptionCHUCK001 SDS + Water Chuck Complete With Arbor

Stock Code DescriptionCHUCK002 Type A Water Jacket C/W No.2 Morse TaperCHUCK003 Type A Water Jacket C/W No.3 Morse TaperCHUCK004 Type A Water Jacket C/W No.4 Morse TaperCHUCK005 Type B Water Jacket C/W No.2 Morse TaperCHUCK006 Type B Water Jacket C/W No 3 Morse TaperCHUCK007 Type B Water Jacket C/W No.4 Morse Taper

Stock Code Tungsten Straight ShankTD022 5.0 X 50mm TD023 5.5 X 90mmTD024 6.0 X 60mmTD025 6.5 X 60mmTD026 7.0 X 90mmTD027 8.0 X 95mmTD028 10.0 X 80mmTD029 12.0 X 90mmTD030 14.0 X 90mmTD031 16.0 X 100mmTD032 18.0 X 100mmTD033 20.0 X 100mm

Stock Code Speedster SDS+TD001 5.0 X 50mmTD002 5.5 X 50mmTD003 6.0 X 100mmTD004 6.5 X 100mmTD005 7.0 X 100mmTD006 8.0 X 110mmTD007 10.0 X 110mmTD008 12.0 X 100mmTD009 13.0 X 100mmTD010 14.0 X 100mmTD011 16.0 X 150mmTD012 18.0 X 150mmTD013 20.0 X 150mmTD014 25.0 X 250mmTD015 28.0 X 250mmTD016 32.0 X 250mm

Type A Type B

Tesa 4432 is a special masking tape with a tough, resistant, stabilised

and stone; normal durability (6 sec./4 bar).

tear.

Stock Code DescriptionTAPE017 150mm X 25 mtrs Scapa Tape (Barnier)TAPE018 225mm X 25 mtrs Scapa Tape (Barnier)TAPE019 300mm X 25 mtrs Scapa Tape (Barnier)

Stock Code DescriptionTAPE015 150mm X 25 mtrs Tesa Tape 4432TAPE016 300mm X 25 mtrs Tesa Tape 4432

Stock Code DescriptionTAPE020B 24mm X 50 mtrs GP Intertape 514 SingleTAPE020C 24mm X 50 mtrs GP Intertape 514 Box Of 36TAPE021B 48mm X 50 mtrs GP Intertape 514 SingleTAPE021C 48mm X 50 mtrs GP Intertape 514 Box Of 24TAPE022B 96mm X 50 mtrs GP Intertape 513 SingleTAPE022C 96mm X 50 mtrs GP Intertape 513 Box Of 12

Stock Code DescriptionTAPE023B 48mm X 50 mtrs Intertape AC10 Silver SingleTAPE023C 48mm X 50 mtrs Intertape AC10 Silver Box Of 24TAPE024B 96mm X 50 mtrs Intertape AC10 Silver SingleTAPE024C 96mm X 50 mtrs Intertape AC10 Silver Box Of 12

Stock Code DescriptionTAPE025 150mm X 33 mtrs AT10 Silver H.D.TapeTAPE026 300mm X 33 mtrs AT10 Silver H.D.Tape



Tel: 01388 605363 / 605353Fax: 01388 60326331


A high tack computer stencil. 15” features trimmed edges and a

precise running on computerised stencil making machines. The

extends to the edge of the liner.

fed.

Anchor 116 Anchor 125

Stock Code DescriptionTAPE003 116 Anchor Tape Hi-Tack 15" x 10YdsTAPE004 116 Anchor Tape Hi-Tack 30" x 10Yds

Stock Code DescriptionTAPE006 125 Anchor Tape 25" x 10Yds

Anchor 155 Anchor T226

Stock Code DescriptionTAPE008 155 Anchor Tape Hi-Tack 19 7/8" x 10YdsTAPE009 155 Anchor Tape Hi-Tack 24" x 10Yds

Stock Code DescriptionTAPE010 T226 Anchor Sandblast Tape 15" x 10YdsTAPE011 T226 Anchor Sandblast Tape 20" x 10YdsTAPE012 T226 Anchor Sandblast Tape 25" x 10Yds

ensure safe working.

Stock Code DescriptionTAPE050 15" X 10 YDSTAPE051 20" X 10 YDSTAPE052 24" X 10 YDS

Stock Code DescriptionTAPE055 15" X 10 YDSTAPE056 20" X 10 YDSTAPE057 24" X 10 YDS



32

A medium tack adhesive designed for use with stencil tapes. On polished surfaces it is recommended that a light coat be applied.

Stencil Filler

Stock Code DescriptionLET002 Stencil Filler 500mlLET003 Stencil Filler Gallon

Sinterball 35/70 Sandblast Grit

Stock Code DescriptionGRIT001 25kg Sinterball Sandblast Grit 35/70

For smoothing out and ensuring maximum adhesion of stencil tape tostone surface.

Stencil Roller

Stock Code DescriptionLET001 100mm Stencil Roller Heavy Duty

nozzles available.

Sapphirite nozzles are resistant to wear, abrasion and breakage, because they are made of high density alumina.

Ceramic Sandblast Nozzles

Norbide Sandblast Nozzles

Stock Code DescriptionLET004 #1 Ceramic Nozzle 3-3/4" Long Large 1/8LET005 #1 Ceramic Nozzle 3-3/4" Long Large 3/32LET006 #2 Ceramic Nozzle 1-1/4" Long Mini 1/8

Stock Code DescriptionLET007 1/8" Norbide Sandblast Nozzle 2l4/205h

memorials and signs with the use of a rubber stencil resist.Stock Code Description

GRIT002 25Kg Virgin Sandblast Grit 30/40GRIT003 25Kg Virgin Sandblast Grit 40/60GRIT004 25Kg Virgin Sandblast Grit 60/80GRIT005 25Kg Virgin Sandblast Grit 80/120GRIT006 25Kg Virgin Sandblast Grit 90/150GRIT007 25Kg Virgin Sandblast Grit 200


Tel: 01388 605363 / 605353Fax: 01388 60326333


Dustless Sandblasters

Taifun 500 Dustless Sandblaster

Rasant 470 Dustless Sandblaster

Stock Code DescriptionBLAST004A Rasant 470 Dustless Sandblaster

Stock Code DescriptionBLAST012 Taifun 500 Dustless Sandblaster




34

Gilding ProductsGold leaf is extremely thin leaves of gold and is too fragile to be handled by 23.5kt Gold Leaf

Le Franc Gold Size

One Shot Gold Size - Fast Dry 1Hr

Harbro Gold Size

Stock Code DescriptionLET016 1 Hr Clear Harbro Gold Size 250mlLET017 4 Hr Clear Harbro Gold Size 250mlLET018 1 Hr Tinted Harbro Gold Size 250mlLET019 4 Hr Tinted Harbro Gold Size 250ml

Stock Code DescriptionLET020 3 Hr Le Franc Clear Gold Size 250mlLET021 12 Hr Le Franc Clear Gold Size 250ml

For the burnishing of gold leaf.

Stock Code DescriptionLET016A One Shot 1Hr Fast Dry Gold Size

Stock Code DescriptionLET095 No.4 Gilding MopLET096 No.6 Gilding MopLET097 No.8 Gilding MopLET098 No.10 Gilding MopLET099 No.12 Gilding Mop

Stock Code DescriptionLET010 23.5kt Loose Gold Leaf 25 Leaves Per BookLET011 23.5kt Transfer Gold Leaf 25 Leaves Per Book


Tel: 01388 605363 / 605353Fax: 01388 60326335


Gilding Products & Machine BitsUsed with water for removing traces of paint or size from the surface of polished stone.

Gilding Block

residue from the surface of polished granite. Used with water.

machine bits.

Stock Code DescriptionLET027 Gilding Block

Stock Code DescriptionLET028 Cuttlefish Bone (1kg)

Stock Code DescriptionLET029 Diamond Cup Wheel 100 X 10 X 20LET030 Carborundum Sharp Wheel For Lettering

Stock Code DescriptionLET035 90 Degree Granite Machine BitLET036 120 Degree Granite Machine BitLET037 90 Degree Marble Machine BitLET038 120 Degree Marble Machine Bit

Stock Code DescriptionLET031 Belt For Incimar MachineLET032 No.1 Guide Point For Incimar MachineLET033 No.2 Guide Point For Incimar MachineLET034 No.3 Guide Point For Incimar Machine

Diamond Wheel Shown



36

Stock Code DescriptionLET070 3Kg Lead Tape 1/2" X 1/8"LET071 3Kg Lead Tape 5/8" X 1/8"LET072 3Kg Lead Tape 3/4" X 1/8"LET073 3Kg Lead Tape 7/8" X 1/8"LET074 3Kg Lead Tape 1" X 1/8"LET075 3Kg Lead Tape 1/2" X 3/16"LET076 3Kg Lead Tape 5/8" X 3/16"LET077 3Kg Lead Tape 3/4" X 3/16"LET078 3Kg Lead Tape 7/8" X 3/16"LET079 3Kg Lead Tape 1" X 3/16"LET080 3Kg Lead Tape 1/2" X 1/4"LET081 3Kg Lead Tape 5/8" X 1/4"LET082 3Kg Lead Tape 3/4" X 1/4"LET083 3Kg Lead Tape 1" X 1/4"

Stock Code DescriptionLET040 3Kg Lead Wire No. 4LET041 3Kg Lead Wire No. 6LET042 3Kg Lead Wire No. 8LET043 3Kg Lead Wire No. 9LET044 3Kg Lead Wire No. 10LET045 3Kg Lead Wire No. 11LET046 3Kg Lead Wire No. 12LET047 3Kg Lead Wire 1/2"LET048 3Kg Lead Wire 3/8"

Stock Code DescriptionLET050 25Kg Lead Wire No.6LET051 25Kg Lead Wire No.8LET052 25Kg Lead Wire No.9LET053 25Kg Lead Wire No.10LET054 25Kg Lead Wire No.11LET055 25Kg Lead Wire No.12

Stock Code DescriptionLET085 Lead Shears Faithful 8"

Stock Code DescriptionLET090 150 X 50 X 50mm Lead Lettering Brick

Stock Code DescriptionHM056 Ebonite Leading MalletHM057 2 3/8" Dia Nylon Leading Mallet EboniteNylon

Email: [email protected]: www.harbrosupplies.com 43Email: [email protected]: www.harbrosupplies.com

Tel: 01388 605363 / 605353Fax: 01388 60326337


Hammers & Mallets

Professional quality hand forged hammer head. Made from tempered steel.Shaped to provide a natural swinging arc.

Premium X' Type Punch Hammer

Standard Punch Hammer

General purpose hammer for use on a wide range of tools including Masons Club Hammer

Stock Code DescriptionHM010 1.6kg Punch Hammer X Type Medium

This hammer has a grid of pyramidal points on either side of the head.

Steel Bouchard Hammer Complete

Steel Bouchard Hammer 1 Piece

Scutch Hammer

Stock Code DescriptionHM050 Scutch Hammer Double EndHM051 Scutch Hammer Single End

Stock Code DescriptionHM004 1.4Kg(3lb) Standard Punch HammerHM006 1.8Kg(4lb) Standard Punch Hammer

Stock Code DescriptionHM090 1.00Kg Masons Club HammerHM092 1.50Kg Masons Club Hammer

Stock Code DescriptionHM045A 20mm Steel Bouchard Hammer CompleteHM046A 25mm Steel Bouchard Hammer CompleteHM047A 30mm Steel Bouchard Hammer Complete

Stock Code DescriptionHM045B 20mm Steel Bouchard Hammer 1 PieceHM046B 25mm Steel Bouchard Hammer 1 Piece



38

Hammers & MalletsProfessional quality hand forged hammer head. Made from tempered

Professional quality hand forged hammer head. Made from tempered

Masons Nylon Mallet

with slight spring.

Stock Code DescriptionHM015 1.4kg Northern Pattern Walling HammerHM016 1.8kg Northern Pattern Walling Hammer

Stock Code DescriptionHM020 1.1kg Southern Pattern Walling HammerHM021 1.6kg Southern Pattern Walling Hammer

Stock Code DescriptionHM025 100mm Masons Nylon MalletHM026 125mm Masons Nylon MalletHM027 150mm Masons Nylon Mallet

Stock Code DescriptionHM028 80mm Lignum Vitae MalletHM029 100mm Masons Beechwood MalletHM030 150mm Masons Beechwood MalletHM031 200mm Masons Beechwood Mallet

Stock Code DescriptionHM035 460grm Lettering Hammer (1lb)HM036 690grm Lettering Hammer (1½lb)HM037 910grm Lettering Hammer (2lb)

Tel: 01388 605363 / 605353Fax: 01388 603263


Tel: 01388 605363 / 605353Fax: 01388 60326339


Hammers & MalletsDummy Mallet

Portuguese Style Dummy Mallet

White Rubber Mallet

Stock Code DescriptionHM040 460grm Dummy Mallet (1lb)HM041 690grm Dummy Mallet (1 ½lb)HM042 910grm Dummy Mallet (2lb)

Stock Code DescriptionHM053 White Rubber Mallet Thor

Stock Code DescriptionHM115 4lb Scottish Dykers Hammer

Stock Code DescriptionHM120 300g Portuguese Dummy MalletHM121 400g Portuguese Dummy MalletHM122 600g Portuguese Dummy MalletHM123 800g Portuguese Dummy MalletHM124 1000g Portuguese Dummy MalletHM125 1250g Portuguese Dummy MalletHM126 1450g Portuguese Dummy Mallet

Brass Dummy MalletStock Code Description

HM130 460g Brass Dummy MalletHM131 690g Brass Dummy MalletHM132 910g Brass Dummy Mallet



40

Wedges, Plugs & Feathers, Lewis Pins

Used to fracture and split natural stone blocks.A method used in quarrying to reduce large masses of stone to smallersize. By using a hammer drill, a row of shallow holes is made along the

of the drill hole. They are placed in the hole and the plug (a steel wedge) is

appears.

Plugs & Feathers (Wedges & Shims)

Split Pin Lewis

X Type Stringer 3mm ChamferStock Code Description

WED003 Small X Type Stringer 3mm ChamferWED004 Large X Type Stringer 3mm Chamfer

Stock Code DescriptionLEW001 Split Pin Lifting Lewis 250 Kg (0.25T) 20mm HoleLEW002 Split Pin Lifting Lewis 500 Kg (0.5 T ) 25mm HoleLEW003 Split Pin Lifting Lewis 1000 Kg (1 T) 29mm HoleLEW004 Split Pin Lifting Lewis 2000 Kg (2 T) 36mm Hole

X Type Riving Wedge

Stock Code DescriptionPL001 Plugs & Feathers 75mm X 16mmPL002 Plugs & Feathers 100mm X 20mmPL003 Plugs & Feathers 150mm X 25mmPL004 Plugs & Feathers 200mm X 32mmPL005 Plugs & Feathers 300mm X 32mm

Stock Code DescriptionWED001 X Type Riving Wedges Small 150X57mmWED002 X Type Riving Wedges Large 150X70mm

Stock Code Hole Plug Length Plug Diameter Max HolePL015 25mm 300mm 24mm 34mmPL016 30mm 300mm 28mm 38mmPL017 30mm 400mm 28mm 38mmPL018 30mm 600mm 28mm 38mmPL019 30mm 800mm 28mm 38mm

Guillet Plugs & Feathers (Wedges & Shims)


Tel: 01388 605363 / 605353Fax: 01388 60326341


brosupplies.cupplie

Velcro Backing Pads

AX Super XM M14

Medium Density M14

EVA Foam M14

Rigid Extra Grip M14

Thin Body M14

EVA Foam M14

Stock Code SizeBPAD001 100mmBPAD002 125mmBPAD003 150mm

Stock Code SizeBPAD004 100mmBPAD005 125mm

Stock Code SizeBPAD006 75mmBPAD007 100mmBPAD008 125mm

Flexible Rubber M14

EVA Extra Grip M14

Aluminium M14


Stock Code SizeBPAD004A 100mmBPAD005A 125mm

Stock Code SizeBPAD001B 100mmBPAD002B 125mm




Stock Code SizeBPAD043 125mm

12mm thick moulded PUR. Flexible rubber.

Strong rigid aluminum.Fairly rigid, no foam layer

10mm EVA foam. Ideal for contoured surfaces.

5mm EVA foam. Extra strong velcro

25mm EVA foam.Ideal for contoured surfaces.

ity M14ity M14

E

FlFl

M14

S

Fle

Backing pads for diamond polishing discs and velcro backed paper discs.

15mm thick medium density.Extra strong velcro.

3mm thick rigid backing pad.Extra strong velcro.



42

Backing Pads

Moss Type Pad M1410 mm thick.Aluminium backing.

paper disc

SS Super XM M14 SS EVA FoamFor use with silicon carbide plain backed paper discs

25mm EVA foam.For use with silicon carbide plain backed paper discs

4

Q/R Snail Foam Q/R Snail Rigid



Q/R snail to velcro.10mm EVA Foam.Ideal for contoured Surfaces

16mm thick PSA.Flexipads version of themoss pad.

paper discs.

Q/R snail to velcro.Neutral colour.

PSA Moss Type Pad M14

Pad height 20mm.The pad is smaller to allow wear of the abrasive disc.

angle grinders.

Nylon Backing PadsPad height 20mm.The pad is smaller to allow wear of the abrasive disc.

Nylon Backing Pads

Stock Code SizeBPAD025 110mm M10BPAD026 115mm M14BPAD027 125mm M14BPAD028 178mm M14BPAD029 230mm M14


Stock Code SizeBPAD017A 125mm



Stock Code SizeBPAD016A 125mm


Tel: 01388 605363 / 605353Fax: 01388 60326343


Backing Pads

Munchen Backing Plate

Frankfurt Backing Plate

Stock Code DescriptionBPAD036 250mm Munchen Backing Plate

Stock Code DescriptionBPAD035 250mm Frankfurt Backing Plate

machines.

250mm Velcro Backing Plate

Stock Code DescriptionDRAP017A 250mm Radial Arm QRS Velcro Adaptor

the life of the machine.

Q/R Adaptor Plate

Stock Code DescriptionBPAD030 Q/R M14BPAD031 Q/R M24BPAD032 Q/R 3/4" BSFBPAD033 Q/R 5/8" UNC

Stock Code FittingBPAD034 M14 - M14



44

Polishing Felts & BonnetsFelt Donut Polishing

Lambs Wool Bonnet

Stock Code DescriptionRU002 125mm Felt Donut M14RU005 178mm Felt Donut M14

Stock Code DescriptionRU013 125mm Lambswool BonnetRU014 178mm Lambswool BonnetRU015 230mm Lambswool Bonnet

Stock Code DescriptionRU009 100 X 25mm Stitched MopRU010 100 X 50mm Stitched MopRU007 150 X 25mm Stitched MopRU008 150 X 50mm Stitched MopRU006 200 X 25mm Stitched Mop

RU006A 200 X 50mm Stitched MopRU012 Rat Tail Fitting M14

QR Felt Wheels

Stock Code DescriptionRU011 100mm Velcro Felt Pad Hard 6mm(Ec)

Stock Code DescriptionRU017 100mm QR Felt WheelRU018 100/130mm Tapered Felt Wheel


Tel: 01388 605363 / 605353Fax: 01388 60326345


Silicon Carbide Sanding DiscsHeavy duty silicon carbide disc for grinding & polishing of natural stones.Silicon Carbide Flat Sanding Discs

Grade 115mm 125mm 180mm 230mmP16 FSD010 FSD019 FSD028 FSD037P24 FSD011 FSD020 FSD029 FSD038P36 FSD012 FSD021 FSD030 FSD039P50 FSD013 FSD022 FSD031 FSD040P60 FSD014 FSD023 FSD032 FSD041P80 FSD015 FSD024 FSD033 FSD042P120 FSD016 FSD025 FSD034 FSD043P240 FSD017 FSD026 FSD035 FSD044P320 FSD018 FSD027 FSD036 FSD045

Premium quality heavy duty silicon carbide disc for rapid grinding ofSpiracut Semi Flexible Discs

Grade 125mm 178mmP16 SA001 SA010P24 SA002 SA011P36 SA003 SA012P60 SA004 SA013P80 SA005 SA014P120 - SA015

Velour discs require a Velcro backing pad.

Silicon Carbide Paper Discs Velour

their backing pads.

Stock Code Description Box QTYPD001 125mm Carbide Paper Disc P24 50PD002 125mm Carbide Paper Disc P40 50PD003 125mm Carbide Paper Disc P60 50PD004 125mm Carbide Paper Disc P80 50PD005 125mm Carbide Paper Disc P120 100PD007 125mm Carbide Paper Disc P220 100PD008 125mm Carbide Paper Disc P320 100PD009 125mm Carbide Paper Disc P400 100PD010 125mm Carbide Paper Disc P600 100PD011 125mm Carbide Paper Disc P800 100PD012 125mm Carbide Paper Disc P1000 100PD013 125mm Carbide Paper Disc P1200 100

Stock Code Description Box QTYPDV012 125mm Carbide Paper Velour P36 50PDV001 125mm Carbide Paper Velour P60 50PDV002 125mm Carbide Paper Velour P80 50PDV003 125mm Carbide Paper Velour 120 100PDV004 125mm Carbide Paper Velour 220 100PDV005 125mm Carbide Paper Velour 320 100PDV006 125mm Carbide Paper Velour 400 100PDV007 125mm Carbide Paper Velour 600 100PDV008 125mm Carbide Paper Velour 800 100PDV009 125mm Carbide Paper Velour 1000 100PDV010 125mm Carbide Paper Velour 1200 100

Stock Code DescriptionSU001 Multi Spray AdhesiveSU002 Flex Kleber Glue



46

Silicon Carbide Blocks & SheetsWet & Dry Paper Sheets 280x230mm

150x50x50 mm Black Carbide Block

150x50x50 mm White Aloxite Block

Flexible Abrasive Block

150x50x50 mm Green Carbide Block

Stock Code DescriptionRU027 150X50X50mm Black Carbide Block C16RU028 150X50X50mm Black Carbide Block C36RU029 150X50X50mm Black Carbide Block C60RU030 150X50X50mm Black Carbide Block C80

Stock Code DescriptionRU031 150X50X50mm White Aloxite Block WA60RU032 150X50X50mm White Aloxite Block WA120

Stock Code DescriptionRU035 Flexible Abrasive Block G30RU036 Flexible Abrasive Block G60RU037 Flexible Abrasive Block G120RU038 Flexible Abrasive Block G240

Stock Code DescriptionSA030 280X230mm Wet/Dry Paper Sheet C60SA031 280X230mm Wet/Dry Paper Sheet C80SA032 280X230mm Wet/Dry Paper Sheet C120SA033 280X230mm Wet/Dry Paper Sheet C220SA034 280X230mm Wet/Dry Paper Sheet C320SA035 280X230mm Wet/Dry Paper Sheet C400SA036 280X230mm Wet/Dry Paper Sheet C600SA037 280X230mm Wet/Dry Paper Sheet C800SA038 280X230mm Wet/Dry Paper Sheet C1000

Stock Code DescriptionRU020 150X50X50mm Green Carbide Block GC36RU021 150X50X50mm Green Carbide Block GC60RU022 150X50X50mm Green Carbide Block GC80RU023 150X50X50mm Green Carbide Block GC120RU024 150X50X50mm Green Carbide Block GC220RU025 150X50X50mm Green Carbide Block GC320


Tel: 01388 605363 / 605353Fax: 01388 60326347


Used for bullnosing, chamfering and polishing straight edges on marble, granite, natural stones & agglomerates.

Grade 100mm x 46 mmC16 RU070C24 RU071C36 RU072C60 RU073C80 RU074C120 RU075C220 RU076C320 RU077

Grade 100mm Synthetic 130mm Synthetic 150mm Synthetic24 ED014 ED042 ED07036 ED015 ED043 ED07146 ED016 ED044 ED07260 ED017 ED045 ED07380 ED018 ED046 ED074120 ED019 ED047 ED075220 ED020 ED048 ED076320 ED021 ED049 ED077400 ED022 ED050 ED078600 ED023 ED051 ED079800 ED024 ED052 ED0801000 ED025 ED053 ED0811200 ED026 ED054 ED0825EX ED027 ED055 ED083

Luc Granito ED028 ED056 ED084

By combining the Protos and Sint abrasives in sequence it is possible to produce a superior

Stock Code DescriptionFURT001 W 01 Frankfurt Segment Synthetic Protos 24FURT002 W 01 Frankfurt Segment Synthetic Protos 36FURT003 W 01 Frankfurt Segment Synthetic Protos 60FURT004 W 01 Frankfurt Segment Synthetic Protos 80FURT005 W 01 Frankfurt Segment Synthetic Protos 120FURT006 W 01 Frankfurt Segment Synthetic Protos 220FURT007 W 01 Frankfurt Segment Synthetic Protos 320FURT008 W 01 Frankfurt Segment Synthetic Protos 400FURT009 W 01 Frankfurt Segment Synthetic Protos 600FURT010 W 01 Frankfurt Segment Synthetic Protos 800FURT011 W 01 Frankfurt Segment Synthetic Protos 2000 LUXFURT012 W 01 Frankfurt Segment Synthetic Protos 3000 LUXFURT013 W 01 Frankfurt Segment Synthetic Protos 5EX

Grade 110/90mm x 55mmC16 RU080C24 RU081C36 RU082C60 RU083C80 RU084C120 RU085C220 RU086C320 RU087



48

Munchen Segments

Stock Code DescriptionFA040 250mm Mordenti Ring No. 1(36 Grit)FA041 250mm Mordenti Ring No. 2 (120 Grit)FA042 250mm Mordenti Ring No. 3 (220 Grit)FA043 250mm Mordenti Ring No. 3/4 (320 Grit)FA044 250mm Mordenti Ring No. 4F (600 Grit)FA045 250mm Mordenti Ring No. 4FF (800 Grit)FA046 250mm Mordenti Ring No. 5EX (Acid Block)FA047 250mm Mordenti Ring No. Luc Granito

Hot Melt PelletsStock Code DescriptionSU009 W 01 Hot Melt Pellets 1Kg

Stock Code DescriptionFA049 W 01 Munchen Synthetic Velox Grade 24FA050 W 01 Munchen Synthetic Velox Grade 36FA059 W 01 Munchen Synthetic Velox Grade 46FA051 W 01 Munchen Synthetic Velox Grade 60FA060 W 01 Munchen Synthetic Velox Grade 80FA052 W 01 Munchen Synthetic Velox Grade 120FA053 W 01 Munchen Synthetic Velox Grade 220FA054 W 01 Munchen Synthetic Velox Grade 320FA055 W 01 Munchen Synthetic Velox Grade 400FA056 W 01 Munchen Synthetic Velox Grade 600FA057 W 01 Munchen Synthetic Velox Grade 800FA058 W 01 Munchen Synthetic Velox Grade 5EX

Stock Code DescriptionTY001 W 01 Antique Effect Frankfurt Brush Grit 36TY002 W 01 Antique Effect Frankfurt Brush Grit 46TY003 W 01 Antique Effect Frankfurt Brush Grit 60TY004 W 01 Antique Effect Frankfurt Brush Grit 80TY005 W 01 Antique Effect Frankfurt Brush Grit 120TY006 W 01 Antique Effect Frankfurt Brush Grit 180TY007 W 01 Antique Effect Frankfurt Brush Grit 240TY008 W 01 Antique Effect Frankfurt Brush Grit 320TY009 W 01 Antique Effect Frankfurt Brush Grit 500

Stock Code DescriptionTY010 W 01 100mm Antique Brush M14 QR Grade 36TY011 W 01 100mm Antique Brush M14 QR Grade 46TY012 W 01 100mm Antique Brush M14 QR Grade 60TY012 W 01 100mm Antique Brush M14 QR Grade 80TY013 W 01 100mm Antique Brush M14 QR Grade 120TY014 W 01 100mm Antique Brush M14 QR Grade 180TY015 W 01 100mm Antique Brush M14 QR Grade 240TY016 W 01 100mm Antique Brush M14 QR Grade 320TY017 W 01 100mm Antique Brush M14 QR Grade 500

Tel: 01388 605363 / 605353Fax: 01388 603263


Tel: 01388 605363 / 605353Fax: 01388 60326349


Polishing Liquid Compound

Stock Code DescriptionSU020 Light Polishing Compound 1 LtrSU021 Dark Polishing Compound 1 Ltr

Polishing Wax & Compounds

Stock Code DescriptionSU003 White Polishing Abrasive StickSU004 Black Polishing Abrasive Stick

Pamir Wax

Stock Code DescriptionSU010 Pamir Wax White 1ltrSU011 Pamir Wax Black 1ltrSU014 Pamir Liquid Wax 1ltr

Stock Code DescriptionSU008 Vernicetta Varnish (1ltr)

Harbro Stone Wax

Stock Code DescriptionSU010.K 1Ltr Stone Wax WhiteSU011.K 1Ltr Stone Wax Black

Polishing Wax & CompoundsColourless liquid which prevents marble and granite from absorbingpermanent stains. Ideal for kitchen tops and tables.

polishing stage on marble.Cleans, polishes and protects marble, granite and slate. 500 ml Aerosol.

on marble and granite.

on your marble and granite worksurfaces.

Stock Code DescriptionSU005 1 LtrSU006 5 Ltr

Stock Code DescriptionSU070 Pure (Kg)SU022 Substitute (Kg)

Stock Code DescriptionSU024 1 Kg

Stock Code DescriptionSU007 500ml

Stock Code DescriptionSU023 00 FineSU015 0 FineSU016 1 MediumSU017 4 Super Coarse

Stock Code DescriptionSU026 Electric Stucco Iron 240v

Stock Code DescriptionSU027 Rosa Hot Stopping Wax Per StickSU030 Black Hot Stopping Wax Per StickSU031 White Hot Stopping Wax Per StickSU032 Light Brown Hot Stopping Wax Per StickSU033 Dark Brown Hot Stopping Wax Per StickSU034 Red Hot Stopping Wax Per StickSU035 Light Green Hot Stopping Wax Per StickSU035A Dark Green Hot Stopping Wax Per StickSU036 Grey Hot Stopping Wax Per StickSU037 Cream Hot Stopping Wax Per StickSU038 Light Straw Hot Stopping Wax Per StickSU039 Dark Straw Hot Stopping Wax Per Stick

Bravo is the new ecological kit, which is easy to use.To help the user to maintain their polished marble or granite work top.Kit contains:Bravoclean 500mlBravocream 250mlHidrobravo 250ml

Stock Code DescriptionLANT042 Bravo Marble Kit



Tel: 01388 605363 / 605353Fax: 01388 60326351


Lantania Stone TreatmentsANTI-STAIN PROTECTION FOR POLISHED MARBLE, GRANITE AND STONEWARETwins.TW

PROTECTION FOR UNPOLISHED MARBLE, STONE AND GRANITETwinsebin.M

PROTECTIVE TONE ENHANCER FOR UNPOLISHED, BUSH HAMMERED AND SEMI-POLISHED MARBLE, STONE AND GRANITE

Avo

SILICON-WAXLantastar

NEUTRAL DETERGENTDetertwins

ALKALINE DETERGENTPAL 4

Stock Code SizeLANT021 1 ltrLANT078 5 ltr





Stock Code SizeLANT105 1 ltr

Tel: 01388 605363 / 605353Fax: 01388 603263



52

Lantania Stone TreatmentsProfessional range of special treatments for natural stone.

detergents and maintenance products.

Product Finishing Products Container Size Stock Code

HidrosebinProtective finish. Water based emulsion specifically formulated for finishing treatment of unpolished medium absorbent marble, granite and stone, leaving a partial shine and satin effect look. Makes upkeep easier.

1 ltr LANT030

TwinswetAgeing effect for marble, stone and untreated granite. Limited Protection for medium/high absorbent marble, cobblestones and veined stones in general. Gives treated surfaces an attractive “wet look” effect and moderate gloss.

1 ltr LANT034

Aquastop Water based treatment for the waterproofing of cement, marble, granite and other natural stones.

1 ltr LANT039

Twins 1740 Solvent based weather proof repellent to render exposed concrete, porous brick pointing and natural stone. Rapid evaporating product for surfaces with medium porosity.

1 ltr LANT040

Twinswall Solvent based consolidator for perishing masonry 1 ltr LANT041

Detertwins Safe bio degradable detergent suitable for daily cleaning of terracotta, marble, granite, and other natural stone surfaces.

1 ltr LANT002

Bravocream

Weekly maintenance treatment to bring the polish back to kitchen surfaces and work pieces for end users. Upkeep emulsion. Specifically manufactured for the upkeep of polished and partially polished worktops. Protects against wear and dirt, for an attractive gloss surface.

250 ml LANT003

Gel wash Water based gelatinous detergent for the removal of smog/carbon monoxide residue on marble, granite and natural stone.

1 ltr LANT005

PAL 1 Concentrated acid based detergent for removal of organic and inorganic dirt. Designed to clean surfaces in cement, undressed granite, bricks and sandstone.

5 ltr LANT009

PAL 4 Strong alkaline based detergent for the removal of organic soiling/dirt from any natural stone surfaces.

5 ltr LANT010

Twins 2151 Wax and paint remover for eliminating old finishes on terracotta, marble, granite and other natural stones.

1 ltr LANT012

Twins 2186A Detergent with slight acidic reaction for removing traces of cement, plaster and grouts from porcelain, granite and natural stones.

1 ltr LANT013

Twinsacido Acidic detergent for the removal of saltpetre and cement from terracotta surfaces.

1 ltr LANT014

Twinspot Stain remover for grease spots (oil, butter) on terracotta, marble, granite and other natural stones.

500ml LANT015

Twinsrux Rust remover for marble, granite and stone. 1 ltr LANT016

Twinstripper Water and solvent based wax remover for eliminating layers of wax or acrylic treatment.

1 ltr LANT017

Hidro.TWStain protection for untreated marble, granite and stone. Easy to apply water based primer to protect untreated marble, granite and natural stone, against stains, oil and water.

1 ltr LANT018

Hidrobravo Water based oil repellent specifically designed for the anti-stain treatment of polished marble and granite surfaces.

1 ltr LANT019

Avo Enhancing solvent based sealer for un polished stone. 1 Ltr LANT057

Twins.TW Solvent based product for anti-spot treatment of polished marble and granite, protecting surfaces from water and oil stains

1 ltr LANT021

Twinsebin.M Solvent based seal for unpolished stone, marble and granite. Maintains a dry natural appearance. Safe for food preparation surfaces.

1 ltr LANT023

Twinsgraff Water based anti-graffiti agent product for medium/high absorbent surfaces. 5 ltr LANT026

TwinsottoUndercoating treatment for cotto, water based product with stronganti-spot & anti-soiling action. It is suitable for the undercoating treatmenton all types of cotto.

1 ltr LANT057

Twinseven Treatment for polished surfaces with imperfections. Ideal for breche marble enhances and produces a good shine.

1 ltr LANT024

Twinseven + Nero Twinseven with added black dye to hide imperfections and intensify the blackness of granite

1 ltr LANT044

Lantastar An enhancing wax based protection of marble & granite. Does not create a film on the surface.

1 ltr LANT105


Tel: 01388 605363 / 605353Fax: 01388 60326353


Stone Glue Polyester Resin

May be used for both polyesterand acrylic adhesives.

Hardener For StonebondColouring pigment for polyester resin.40ml

Stonebond Colouring Paste

Colour 1ltrVertical Clear RE001.HVertical Straw RE002.H

Vertical Dark Straw RE037.HVertical Black RE003.HVertical White RE004.HVertical Green RE035.HVertical Red RE036.H

All resin supplied with hardener.

Harbro Stonebond

Fidal Water Clearresin.

Horizontal Clear

Stock Code DescriptionRE023 1ltr HorizontalRE024 1ltr Vertical

Stock Code DescriptionRE038.H 1 ltr StonebondRE025 1 ltr Fidal MV

Stock Code DescriptionRE075A BlackRE076A WhiteRE077A RedRE078A BlueRE079A YellowRE080A GreenRE081A BrownRE082A Red/Brown

Stock Code DescriptionRE020 35mlRE021 150ml

olyester

Colour 1ltrVertrr ical Clear RE001.HVertrr ical Straw RE002.H

Vertrr ical Dark Straw RE037.HVertrr ical Black RE003.H

Water clear polyester resin.Actually dries clear.



54

Workshop Air Compressors

Model Size E Size V Size U Size T Size S Size RPiston Diameter mm 11 16 20 25 25 28

Weight kg 0.24 0.7 1.1 1.5 1.9 2Air Consumption CFM 3.5 5 6 7.5 8.7 9.9

Blows Per Minute 7200 6500 6000 6000 5500 5000Shank Diameter mm 7.5 12.7 12.7 12.7 12.7 12.7

Vibration M/S² 10.1 13.8 27.5 24 27.2 20.7Stock Code HM076 HM077 HM078 HM079 HM080 HM081

Stock Code DescriptionSU040 Brass M Hose Connector 1/2"BSP-3/8" TailSU041 Brass M Hose Connector 1/2"BSP-1/2" TailSU042 Brass M Hose Connector 1/4"BSP-3/8" TailSU042A Brass M Hose Connector 1/4"BSP-1/4" TailSU043 Brass M Hose Connector 1/4"BSP Male- PclSU052 Brass M Hose Connector 3/8"Tail/PclSU044 Vertex Slimline Coupling 1/4" F - Pcl FSU045 Stopcock Ea 3830 - 1/4 Mini LeverSU047 Jubilee Clip 9.5 - 12mmSU048 Jubilee Clip 13 - 20mmSU049 Jubilee Clip 18 - 25mmSU051 Air Hose 3/8" Bore Mtr

HAMMER88 Pneumatic Hammer Oil

Stock Code Motor HP Air Receiver Displacement Free Air Max Pressure Phase Noise DimensionsCOMP006 3.0 150ltrs 13.0 CFM 9 CFM 10.0 Bar 1 79dB(A) 1350x540x1040mmCOMP007 5.5 270ltrs 20.0 CFM 16 CFM 10.0 Bar 3 81dB(A) 1500x500x1110mmCOMP008 7.5 270ltrs 29.7 CFM 23 CFM 10.0 Bar 3 79dB(A) 1500x500x1240mm


Tel: 01388 605363 / 605353Fax: 01388 60326355


X Quality Steel Tools

X Quality Steel Pitcher

X Quality Steel Chisel

X Quality Steel Punch

Size Hammer Head Mallet Head3mm FIC001 FIC0205mm FIC002 FIC0216mm FIC003 FIC02210mm FIC004 FIC02312mm FIC005 FIC02416mm FIC006 FIC02520mm FIC007 FIC02625mm FIC008 FIC02737mm FIC009 FIC02850mm FIC010 FIC02963mm FIC011 FIC03075mm FIC012 FIC031100mm FIC014 -150mm FIC015 -

Stock Code DescriptionFIP001 25mm X 20mm X Qual Pitcher H.H.FIP002 37mm X 20mm X Qual Pitcher H.H.FIP003 50mm X 20mm X Qual Pitcher H.H.FIP004 63mm X 22mm X Qual Pitcher H.H.FIP005 75mm X 25mm X Qual Pitcher H.H.

Stock Code DescriptionFIP010 10mm Oct X Qual Steel Punch H.H.FIP011 12mm Oct X Qual Steel Punch H.H.FIP012 16mm Oct X Qual Steel Punch H.H.FIP013 20mm Oct X Qual Steel Punch H.H.FIP014 22mm Oct X Qual Steel Punch H.H.FIP015 25mm Oct X Qual Steel Punch H.H.

X Quality Steel PointStock Code Description

FIP020 10mm Oct X Qual Steel Point H.H.FIP021 12mm Oct X Qual Steel Point H.H.FIP022 16mm Oct X Qual Steel Point H.H.FIP023 20mm Oct X Qual Steel Point H.H.FIP024 22mm Oct X Qual Steel Point H.H.FIP025 25mm Oct X Qual Steel Point H.H.

X Quality Steel Claw Tool HolderSize Hammer Head Mallet Head Pneumatic12mm FIC055 FIC059 FIC06525mm FIC056 FIC060 FIC06637mm FIC057 FIC061 FIC06750mm FIC058 FIC062 FIC068



56

Steel Guillet Tool Kits

Guillet Steel Tool Set 4232 Hammer Head Kit consists of:Tool Roll 30mm Steel Chisel 14mm Octagon25mm Steel Chisel 12mm Octagon20mm Steel Chisel 10mm Octagon10mm 6mm Rad Steel Gouge 8mm Octagon25mm Steel Claw 12mm Octagon 5 Flat Teeth15mm Steel Claw 10mm Octagon 5 Pointed Teeth20mm Steel Claw 12mm Octagon 6 Pointed Teeth15mm Steel Doe Foot Claw 15mm 2 Flat Teeth10mm Steel Fishtail 10mm Octagon15mm Steel Rondelle 8mm Octagon12mm Steel Point 12mm Octagon10mm Flat Pointed Snake Chisel 8mm Octagon

er Head

Stock CodeMTS008

Stock CodeMTS009

Guillet Steel Tool Set 5195 Hammer Headrrrrrrrr Head

Stock CodeMTS007

Kit consists of:Tool Roll Round Portugese 300g dummy mallet complete with handle6,15mm x 8mm Oct chisel.8mm R6 Steel Gouge 8mm Octagon15mm Steel Claw 8mm Octagon 4 Flat Teeth10mm Steel Claw 8mm Octagon 4 Point Teeth6mm Steel Doe Foot Claw 8mm Octagon 2 Flat Teeth6mm Fishtail Steel Chisel 8mm Octagon6mm Rondelle Steel Chisel 8mm OctagonSteel Point 8mm Octagon6mm Flat Pointed Snake Chisel 8mm OctagonBouchard Chisel 16 teeth 12mm Octagon

Kit consists of:Tool Roll 10mm Steel Chisel 14mm Octagon20mm Steel Chisel 14mm Octagon30mm Steel Chisel 14mm Octagon40mm Steel Chisel 14mm Octagon15mm Steel Claw 5 Flat Teeth 14mm Octagon15mm Steel Claw 5 Pointed Teeth 14mm Octagon24mm Steel Claw 6 Pointed Teeth 14mm Octagon29mm Steel Claw 7 Pointed Teeth 16mm OctagonSteel Point 16mm Octagon15mm R10 Steel Gouge 14mm Octagon20mm R14 Steel Gouge 14mm Octagon25mm R19 Steel Gouge 15mm Octagon

Guillet Steel Tool Set 1975 Hammer Head

Stock CodeMTS015

Kit consists of:Round Portugese 600g dummy mallet complete with handle10mm stone chisel15mm stone chiselMedium Point15mm Claw tool (5 Tooth)Tool roll


Tel: 01388 605363 / 605353Fax: 01388 60326357


Steel Tooling & Kits

Claw Bits (Scutch Combs)

F Brand Cold Steel Claw Tool Holder

Size Hammer Head Mallet Head Pn 50x12.712mm FIC070 FIC075 FIC08025mm FIC071 FIC076 FIC08137mm FIC072 FIC077 FIC08250mm FIC073 FIC078 FIC083

Guillet Steel Gouge Hammer HeadStock Code Description

GSG001 8mm Steel GougeGSG002 10mm Steel GougeGSG003 15mm Steel GougeGSG004 20mm Steel GougeGSG005 25mm Steel GougeGSG006 30mm Steel Gouge

Italian Steel Fishtail Carving Claws

Stock Code DescriptionGSG010 15mm Steel GougeGSG011 20mm Steel GougeGSG012 25mm Steel Gouge

Italian Steel Fishtail Carving Chisels

Stock Code DescriptionSTCC001 6mmSTCC002 10mmSTCC003 12mm

Stock Code DescriptionSTCC004 5mmSTCC005 6mmSTCC006 10mm

Stock Code DescriptionFIS001 12mmFIS002 25mmFIS003 37mmFIS004 50mm



58

Tungsten Carbide Tool KitsStarter kit for carving, kit includes the following:Tool Roll690g Iron Dummy5mm, 8mm, 12mm Carbide Fishtail Carving Chisel Mallet Head25mm Riley Claw Tool Holder Mallet Head 5 x 25mm Stone Claw Bits150 x 25mm Red Sharpening Strip

Carbide Carving Kit

Starter kit for masonry workers. Kit includes the following:Tool Roll125 mm Nylon Mallet6mm ,12mm, 25mm,37mm Carbide Masonry Chisel Mallet Head 450 x 300mm Steel Square1 mtr steel Straight Edge150 x 50mm Red Sharpening Strip

Carbide Masonry Kit

4mm, 6mm, 8mm, 10mm, 12mm, 15mm, 20mm Carbide ChiselsCarbide ScriberGuillet Fabric Tool Roll

Guillet Europ Carbide Tool Set 7342

4mm, 6mm, 8mm, 10mm, 12mm, 15mm, 20mm Carbide ChiselsCarbide ScriberGuillet Fabric Tool Roll

Guillet Fort Carbide Tool Set 2857

e Chisels

Stock Code DescriptionMTS013 Carbide Carving Starter Kit

Stock Code DescriptionMTS014 Carbide Masonry Starter Kit

Stock Code DescriptionMTS010 Set 8 Fort Carbide Tool Set Guillet 2857

Stock Code DescriptionMTS004 Set 8 Carbide Europ Chisels Guillet 7342


Tel: 01388 605363 / 605353Fax: 01388 60326359


Carbide Masonry Chisels

Faulds Carbide Marble/Stone MasonrySize Mallet Head PN 50x12.7mm3mm TTFM010 TTFM0205mm TTFM011 TTFM0216mm TTFM012 TTFM02210mm TTFM013 TTFM02312mm TTFM014 TTFM02416mm TTFM015 TTFM02520mm TTFM016 TTFM02625mm TTFM017 TTFM02737mm TTFM018 TTFM02850mm TTFM019 TTFM029

Al-Orr Carbide Marble Masonry Chisels

KeNe Carbide Stone Masonry Chisel

Size Hammer Head Mallet Head PN 50x12.7mm6mm TTAM001 TTAM020 TTAM03010mm TTAM002 TTAM021 TTAM03112mm TTAM003 TTAM022 TTAM03216mm TTAM004 TTAM023 TTAM03320mm TTAM005 TTAM024 TTAM03425mm TTAM006 TTAM025 TTAM03537mm - TTAM026 TTAM03650mm - TTAM027 TTAM037100mm - TTAM029 -

Size Hammer Head Mallet Head PN 50x12.7mm6mm - TTKM001 TTKM01010mm - TTKM002 TTKM01112mm - TTKM003 TTKM01216mm - TTKM004 TTKM01320mm - TTKM005 TTKM01425mm TTKM020 TTKM006 TTKM01537mm TTKM021 TTKM007 TTKM01650mm TTKM022 TTKM008 TTKM01763mm TTKM023 - TTKM01875mm TTKM024 - -

KeNe brand tungsten carbide masonry chisels for use on stone.

Al-Orr brand tungsten carbide masonry chisels for use on marble.

Faulds H.Duty Marble/Stone Masonry Size Hammer Head Mallet Head PN 50x12.7mm6mm TTFM030 TTFM041 TTFM05110mm TTFM031 TTFM042 TTFM05212mm TTFM032 TTFM043 TTFM05316mm - TTFM044 TTFM05420mm TTFM033 TTFM045 TTFM05525mm TTFM035 TTFM046 TTFM05637mm TTFM036 TTFM047 TTFM05750mm TTFM037 TTFM048 TTFM05863mm TTFM038 TTFM049 -75mm TTFM039 TTFM050 -

TUNGSTEN CARBIDEMARBLE/STONE

Al-ORR

TUNGSTEN CARBIDEKe Ne“S T O N E

Size Stock CodeTTGM020 6mm T.T.14 Oct Fort Chisel Pn 2X1/2TTGM021 10mm T.T.14 Oct Fort Chisel Pn 2X1/2TTGM022 15mm T.T.14 Oct Fort Chisel Pn 2X1/2TTGM023 20mm T.T.14 Oct Fort Chisel Pn 2X1/2TTGM024 25mm T.T.16 Oct Fort Chisel Pn 2X1/2TTGM025 30mm T.T.18 Oct Fort Chisel Pn 2X1/2TTGM026 40mm T.T.20 Oct Fort Chisel Pn 2X1/2



60

Carbide Masonry Chisels

Size Hammer Head PN 50x12.7mm6mm TTFM060 TTFM07010mm TTFM061 TTFM07112mm TTFM062 TTFM07220mm TTFM063 TTFM07325mm TTFM064 TTFM07437mm TTFM065 TTFM07550mm TTFM066 TTFM076

Guillet brand tungsten carbide masonry chisels for marble and granite.Guillet Fort Universal Masonry Chisel



Al-Orr Granite Masonry Chisel

Faulds brand carbide masonry chisels.Faulds Granite Masonry Chisel

Size Stock CodeTTGM001 4mm T.T. 10 Oct Fort Chisel H.H.TTGM002 6mm T.T. 10 Oct Fort Chisel H.H.TTGM003 8mm T.T. 10 Oct Fort Chisel H.H.TTGM004 10mm T.T. 10 Oct Fort Chisel H.H.TTGM005 12mm T.T. 10 Oct Fort Chisel H.H.TTGM006 15mm T.T. 12 Oct Fort Chisel H.H.TTGM007 20mm T.T. 12 Oct Fort Chisel H.H.

Size Stock CodeTTGM010 4mm T.T.10 Oct Fort Chisel Pn 2X1/2TTGM011 6mm T.T.10 Oct Fort Chisel Pn 2X1/2TTGM012 8mm T.T.10 Oct Fort Chisel Pn 2X1/2TTGM013 10mm T.T.10 Oct Fort Chisel Pn 2X1/2TTGM014 12mm T.T.10 Oct Fort Chisel Pn 2X1/2TTGM015 15mm T.T.12 Oct Fort Chisel Pn 2X1/2TTGM016 20mm T.T.12 Oct Fort Chisel Pn 2X1/2

Size Stock CodeTTAM040 6mm T.T.Gran Mas Chis Pn50X12.7mmTTAM041 10mm T.T.Gran Mas Chis Pn50X12.7mmTTAM042 12mm T.T.Gran Mas Chis Pn50X12.7mmTTAM043 16mm T.T.Gran Mas Chis Pn50X12.7mmTTAM044 20mm T.T.Gran Mas Chis Pn50X12.7mmTTAM045 25mm T.T.Gran Mas Chis Pn50X12.7mmTTAM046 37mm T.T.Gran Mas Chis Pn50X12.7mmTTAM047 50mm T.T.Gran Mas Chis Pn50X12.7mm


Al-ORR


Tel: 01388 605363 / 605353Fax: 01388 60326361


Size Hammer Head PN 50x12.7 PN 44x10.23mm TTAL010 TTAL029 TTAL0495mm TTAL011 TTAL031 TTAL0506mm TTAL012 TTAL032 TTAL0518mm TTAL013 TTAL033 TTAL05210mm TTAL014 TTAL034 TTAL05312mm TTAL015 TTAL035 TTAL05416mm TTAL016 TTAL036 TTAL05520mm TTAL017 TTAL037 TTAL05625mm TTAL018 TTAL038 TTAL057

Size Hammer Head PN 50x12.7 PN 44x10.23mm TTAL001 TTAL020 TTAL0405mm TTAL002 TTAL021 TTAL0416mm TTAL003 TTAL022 TTAL0428mm TTAL004 TTAL023 TTAL04310mm TTAL005 TTAL024 TTAL04412mm TTAL006 TTAL025 TTAL04516mm TTAL007 TTAL026 TTAL04620mm TTAL008 TTAL027 TTAL04725mm TTAL009 TTAL028 TTAL048

Size Hammer Head PN 50x12.7 PN 40x10.23mm TTFL010 TTFL029 TUNGSTEN0685mm TTFL011 TTFL030 TUNGSTEN0696mm TTFL012 TTFL031 TUNGSTEN0708mm TTFL013 TTFL032 TUNGSTEN07110mm TTFL014 TTFL033 TUNGSTEN07212mm TTFL015 TTFL034 TUNGSTEN07316mm TTFL016 TTFL035 TUNGSTEN07420mm TTFL017 TTFL036 TUNGSTEN07525mm TTFL018 TTFL037 TUNGSTEN077

Size Hammer Head PN 50x12.7 PN 40x10.23mm TTFL001 TTFL020 TUNGSTEN0585mm TTFL002 TTFL021 TUNGSTEN0596mm TTFL003 TTFL022 TUNGSTEN0608mm TTFL004 TTFL023 TUNGSTEN06110mm TTFL005 TTFL024 TUNGSTEN06212mm TTFL006 TTFL025 TUNGSTEN06316mm TTFL007 TTFL026 TUNGSTEN06420mm TTFL008 TTFL027 TUNGSTEN06525mm TTFL009 TTFL028 TUNGSTEN067

Size Description3mm TTUL0014mm TTUL0025mm TTUL0036mm TTUL0047mm TTUL0058mm TTUL00610mm TTUL00712mm TTUL00816mm TTUL009


Al-ORR


Al-ORR



62

Caps For Europ Chisel

Stock Code SizeTTGL001 4mm T.T. Europ Chisel H.H. Guillet 3400TTGL002 5mm T.T. Europ Chisel H.H. Guillet 5317TTGL003 6mm T.T. Europ Chisel H.H. Guillet 2806TTGL004 7mm T.T. Europ Chisel H.H. Guillet 1843TTGL005 8mm T.T. Europ Chisel H.H. Guillet 8692TTGL006 10mm T.T. Europ Chisel H.H.Guillet 5497TTGL007 12mm T.T. Europ Chisel H.H.Guillet 4354TTGL008 15mm T.T. Europ Chisel H.H.Guillet 1015TTGL009 20mm T.T. Europ Chisel H.H.Guillet 5263

Size Hammer Head Mallet Head PN 50x12.73mm TTFF001 TTFF011 TTFF021 5mm TTFF002 TTFF012 TTFF022 6mm TTFF003 TTFF013 TTFF023 8mm TTFF004 TTFF014 TTFF024 10mm TTFF005 TTFF015 TTFF025 12mm TTFF006 TTFF016 TTFF026 16mm TTFF007 TTFF017 TTFF027 20mm TTFF008 TTFF018 TTFF028 25mm TTFF010 TTFF020 TTFF030

Stock Code SizeTTGL010 12.7mm Shank Europ Chisel Guillet 3005TTGL011 Hammer Head Shank - Europ Guillet 6703TTGL012 Mallet Head Adaptor Europe Guillet 3035TTGL013 Pneumatic Striking Cap Guillet 10/2 9412

Size Mallet Head PN 50x12.7mm6mm TTFB001 TTFB01010mm TTFB002 TTFB01112mm TTFB003 TTFB01220mm TTFB004 TTFB01325mm TTFB005 TTFB01437mm TTFB006 TTFB01550mm TTFB007 TTFB016

Stock Code DescriptionTOOL ROLL Fabric Tool Roll Guillet Stock Code Description

TOOLROLL W Leather Chisel Roll, 8 Pocket


Tel: 01388 605363 / 605353Fax: 01388 60326363


Carbide Punches & Points

Guillet universal punch for all natural stones. Hammer headed.Guillet Carbide Universal Punches

Guillet Carbide Universal Points

Shallow-angled tungsten carbide punch for marble.Al-Orr Carbide Marble Punch

Shallow-angled tungsten carbide punch for granite.Al-Orr Carbide Granite Punch

Stock Code SizeTTGP001 10mm T.T. Univ Point H.H. Guillet 175mm 3962TTGP003 16mm T.T. Univ Point H.H. Guillet 210mm 5299TTGP007 20mm T.T. Univ Point H.H. Guillet 300mm 4697TTGP008 22mm T.T. Univ Point H.H. Guillet 220mm 1906

Stock Code SizeTTGP011 16mm T.T. Univ Punch H.H. Guillet 210mm 9867TTGP013 20mm T.T. Univ Punch H.H. Guillet 220mm 7757

Guillet universal points for all natural stones. Hammer headed.

Shallow-angled tungsten carbide punch for granite. Hammer headed.

Shallow-angled tungsten carbide punch for sandstone. Hammer headed.Kene Carbide Stone Punches

Size DescriptionTTKP001 5mm T.T. Light Duty Stone Punch H.H.TTKP002 6mm T.T. Heavy Duty Stone Punch H.H.

Size DescriptionTTKP003 6mm T.T. Light Duty Granite Punch H.H.TTKP004 10mm T.T. Heavy Duty Granite Punch H.H.

Size DescriptionTTAP001 6mm T.T. Marble Punch H.H.TTAP002 6mm T.T. Marble Punch M.H.TTAP003 6mm T.T. Marble Punch Pn 50X12.7mm

Size DescriptionTTAP004 6mm T.T. Granite Punch H.H.TTAP005 6mm T.T. Granite Punch Pn 50X12.7mm

Kene Carbide Granite Punches TUNGSTEN CARBIDEKe Ne“S T O N E

TUNGSTEN CARBIDEKe Ne“S T O N E


Al-ORR


Al-ORR



64

Carbide Claw Tools & PitchersAl-Orr Carbide Claw Tool

Faulds Carbide Claw Tool

Size Hammer Head Mallet Head PN 50x12.7mm12mm TTAC001 TTAC005 TTAC00925mm TTAC002 TTAC006 TTAC01037mm TTAC003 TTAC007 TTAC01150mm TTAC004 TTAC008 TTAC012

Size Hammer Head Mallet Head PN 50x12.712mm TTFC001 TTFC005 TTFC009 25mm TTFC002 TTFC006 TTFC010 37mm TTFC003 TTFC007 TTFC011 50mm TTFC004 TTFC008 TTFC012

Italian Carbide Fine Carving Claws

Kene Carbide Pitchers

Riley X Type TT Carbide Sandstone Pitcher

Size Sandstone Granite25mm TTKP010 TTKP01537mm TTKP011 TTKP01650mm TTKP012 TTKP01763mm TTKP013 TTKP01875mm TTKP014 TTKP019

Stock Code DescriptionTTUC001 4mm 2 Tooth Carbide Fine Claw H.H.TTUC002 6mm 3 Tooth Carbide Fine Claw H.H.TTUC003 8mm 4 Tooth Carbide Fine Claw H.H.TTUC004 10mm 5 Tooth Carbide Fine Claw H.H.TTUC005 12mm 6 Tooth Carbide Fine Claw H.H.TTUC006 15mm 4 Tooth Carbide Fine Claw H.H.

Stock Code DescriptionTTRP001 25mm x 20mmTTRP002 37mm x 20mmTTRP003 50mm x 20mmTTRP004 63mm x 22mmTTRP005 75mm x 25mm

Stock Code DescriptionTTGD001 20mm 4 Point Round




Stock Code DescriptionTTGD005 20mm 4 Point Square

Stock Code DescriptionTTGD006 30mm 16 Point Square

Stock Code DescriptionTTGD007 30mm 9 Point Tool 190mm Long



Stock Code DescriptionTTGD010 30mm 4 Blade Tool 190mm Long

Stock Code DescriptionTTGD011 5/10mm 8 Point Tool 210mm Long

Stock Code DescriptionTTGD012 10/10mm 16 Point Tool 210mm Long

Guillet Carbide Dunters


Tel: 01388 605363 / 605353Fax: 01388 60326365




66

Lead Drill Bits & Brick Bolster

Size Marble Granite2.4mm TTAD001 TTAD0033.0mm TTAD002 TTAD004

Faulds

Italian

Steel Brick Bolster

Kene Size Marble Granite

1.6mm TTKD001 -2.0mm TTKD002 -2.4mm TTKD003 TTKD0082.8mm TTKD004 TTKD0093.0mm TTKD005 TTKD010

Stock Code DescriptionSTBB001 75mm Brick Bolster Hammer HeadSTBB002 100mm Brick Bolster Hammer Head

Stock Code DescriptionTTFD001 2.4mm T.T. Gran Drill BitTTFD002 3.0mm T.T. Gran Drill Bit

Stock Code DescriptionTTID001 2.5mm TT Marble Drill Bit RotaryTTID002 3.0mm TT Granite Drill BitTTID003 3.0mm TT Universal PrecusionTTID004 2.5mm TT Granite Rotary Drill Bit



67 Tel: 01388 605363 / 605353Fax: 01388 603263

Tool Sharpening

Carbide block suitable for sharpening both tungsten and steel tooling.Dual Sharpening Block

For sharpening tungsten chisels, wet use.Diamond Sharpening Block

Kaindl SM180 Sharpening Machine

Replacement diamond discs to suit Kaindl SM180 machine.Kaindl SM180 Replacement Disc

Green Silicon Carbide Grinding Wheel

Economy Dual Bench Grinder 240v

Stock Code DescriptionSH013 150X50X25mm Combination Sharp Stone 114

Stock Code DescriptionSH025 150mm Einhell BTDB150 Bench Grinder

Stock Code DescriptionSH020 Kaindl SM180 Sharpening MachineSH021 Kaindl Optical Lens For SM180

Stock Code DescriptionSH022 Kaindl SM180 Diamond Disc Standard 126SH023 Kaindl SM180 Diamond Disc Medium 76SH024 Kaindl SM180 Diamond Disc Fine 46

Stock Code DescriptionSH014 150X50mm Diamond Sharp Block RedSH015 150X50mm Diamond Sharp Block Red/YellowSH016 150X50mm Diamond Sharp Strip RedSH017 150X25mm Diamond Sharp Strip RedSH018 150X25mm Diamond Sharp Strip Yellow

Stock Code Ømm Width Bore GradeSH004 150mm 20.0mm 12.7mm GC60SH005 150mm 20.0mm 12.7mm GC80SH006 150mm 20.0mm 12.7mm GC120SH007 150mm 25.0mm 12.7mm GC60SH008 150mm 25.0mm 12.7mm GC80SH009 150mm 25.0mm 12.7mm GC120SH010 200mm 25.0mm 12.7mm GC60SH011 200mm 25.0mm 12.7mm GC80SH012 200mm 25.0mm 12.7mm GC120



68

Diamond Polishing Discs

Premium quality wet diamond polishing disc for marble and granite.Diamond impregnated resin discs allow for rapid stock removal and

Must be used wet. Velcro backed. Max speed 4000RPM.

NEMESIS Wet Polishing Discs (8 Step)

Premium quality dry diamond polishing discs for granite and marble.Velcro backed. Max. speed 2500 R.P.M. To be used dry.

NEO Dry Polishing Discs 100mm (8 Step)

A 3 step system using 100mm velcro backed hybrid wet/dry diamond polishing discs. For granite and engineered stone, to be used wet or dry.

Prime Hybrid Wet/Dry Polishing Discs (3 Step)

100mm velcro backed wet diamond polishing discs for granite and engineered stone, to be used wet.

(6 Step)

Stock Code DescriptionNEO001 100mm Velcro Neo Dry Disc Grade 50 Lt. GreenNEO002 100mm Velcro Neo Dry Disc Grade 100 RedNEO003 100mm Velcro Neo Dry Disc Grade 200 YellowNEO004 100mm Velcro Neo Dry Disc Grade 400 Lt. BlueNEO005 100mm Velcro Neo Dry Disc Grade 800 Dk. GreenNEO006 100mm Velcro Neo Dry Disc Grade 1500 OrangeNEO007 100mm Velcro Neo Dry Disc Grade 3000 PinkNEO008 100mm Velcro Neo Dry Disc Grade BuffNEO009 100mm Velcro Neo Dry Disc Grade W/Buff

Stock Code Description3STEP010 100mm 3 Step Velcro Disc Stage 13STEP011 100mm 3 Step Velcro Disc Stage 23STEP012 100mm 3 Step Velcro Disc Stage 3

Stock Code DescriptionSENT001 Sentinel Position 1SENT002 Sentinel Position 2SENT003 Sentinel Position 3SENT004 Sentinel Position 4SENT005 Sentinel Position 5SENT006 Sentinel Position 6

Grade 75mm 100mm 125mm30G NEM001 NEM010 NEM02050G NEM002 NEM011 NEM021100G NEM003 NEM012 NEM022200G NEM004 NEM013 NEM023400G NEM005 NEM014 NEM024800G NEM006 NEM015 NEM0251500G NEM007 NEM016 NEM0263000G NEM008 NEM017 NEM027

Black Buff NEM009 NEM018



69

Diamond Polishing Discs

100mm DIA-SOL Wet Polishing Discs

Grade M14 Q/R Snail60 Green DIA060 DIA066120 Black DIA061 DIA067200 Red DIA062 DIA068400 Yellow DIA063 DIA0691000 White DIA064 DIA0702000 Blue DIA065 DIA07110000 Orange - DIA072

100mm Kwik Flex / Dia Dot Wet Discs

Grade Velcro M14 Q/R Snail40 Brown DIA029 DIA040 DIA05060 Green DIA030 DIA041 DIA051120 Black DIA031 DIA042 DIA052200 Red DIA032 DIA043 DIA053400 Yellow DIA033 DIA044 DIA0541000 White DIA034 DIA045 DIA0552000 Blue DIA035 DIA046 DIA05610000 Orange DIA036 DIA047 DIA057

100mm Rapier Wet/Dry Polishing Discs

Grade M14 Q/R Snail Velcro60 Green DIA010 DIA016 DIA022120 Black DIA011 DIA017 DIA023200 Red DIA012 DIA018 DIA024400 Yellow DIA013 DIA019 DIA0251000 White DIA014 DIA020 DIA0262000 Blue DIA015 DIA021 DIA02710000 Orange - - DIA028

Stock Code DescriptionDIA001 100mm Rapier Disc Velcro Grade 40DIA002 100mm Rapier Disc Velcro Grade 50DIA003 100mm Rapier Disc Velcro Grade 100DIA004 100mm Rapier Disc Velcro Grade 200DIA005 100mm Rapier Disc Velcro Grade 400DIA006 100mm Rapier Disc Velcro Grade 600

100mm Ironhide Wet Polishing Discs

Stock Code DescriptionDIA085 100mm Ironhide Diamond Velcro Disc 50DIA086 100mm Ironhide Diamond Velcro Disc 120



70

Diamond Polishing Discs & DrumsUniversal Vacuum brazed product. High diamond exposure. For manual and

polishing sequence .For granite, marble & sandstone.

100mm Vacuum Brazed Grinding Disc

Stock Code DescriptionDIA080 100mm VTS Sabre Velcro Grit 30DIA081 100mm VTS Sabre Velcro Grit 50DIA082 100mm VTS Sabre Velcro Grit 100DIA083 100mm VTS Sabre Velcro Grit 200

and natural stone. It can be used on both angle grinders and polishers.

Vacuum Brazed Universal Drum M14

Metal Bond Drum M14

Grade 50x50mm 75x50mm30 DR001 DR00550 DR002 DR006100 DR003 DR007200 DR004 DR008

Stock Code DescriptionDR011 50mm Metal Bond Drum M14DR010 75mm Metal Bond Drum M14

Chevron Drum for Polishing Granite

Grade 50x50mm 75x50mm60 Green DR015 DR021120 Black DR016 DR022200 Red DR017 DR023400 Yellow DR018 DR0241000 White DR019 DR0252000 Blue DR020 DR026

Grade 50x42mm 75x50mm60 Green DR030 DR037120 Black DR031 DR038200 Red DR032 DR039400 Yellow DR033 DR0401000 White DR034 DR0412000 Blue DR035 DR04210000 Orange DR036 -



71

Diamond Hand Pads & Sheets

For wet grinding and polishing the edges and surfaces of a wide range of materials such as granite, marble, engineered stones.

Available in 20mm, 30mm & 40mm.

Hand-E-Files in Wallet Wet Use

Used to cut close into a corner where a boss or backing nut would get in the way. 6mm shank.

Diamond Spindle Saws Electroplated

other natural stones. Used wet or dry.Stock Code DescriptionHPAD001 100mm X 55mm Green Diapad 60GHPAD002 100mm X 55mm Black Diapad 120GHPAD003 100mm X 55mm Red Diapad 220GHPAD004 100mm X 55mm Yellow Diapad 400GHPAD005 100mm X 55mm White Diapad 800GHPAD006 100mm X 55mm Blue Diapad 1800G

Unbacked Flexible Diamond Sheet

Stock Code DescriptionDIA100 Unbacked Electro Sheet Green 50GDIA101 Unbacked Electro Sheet Black 100GDIA102 Unbacked Electro Sheet Red 200GDIA103 Unbacked Electro Sheet Yellow 400GDIA104 Unbacked Electro Sheet White 800GDIA105 Unbacked Electro Sheet Blue 1500G

Stock Code DescriptionDIA090 Hand E Files BlackDIA091 Hand E Files RedDIA092 Hand E Files YellowDIA093 Hand E Files White

Stock Code DescriptionSSAW001 25mm Integral Spindle Saw 40/50SSAW002 40mm Integral Spindle Saw 40/50SSAW003 50mm Integral Spindle Saw 40/50SSAW004 65mm Integral Spindle Saw 40/50SSAW005 75mm Integral Spindle Saw 40/50



72

Diamond Cup WheelsWet or dry grinding for granite, marble and stone.For rapid stock removal.

Turbo Cup Wheel Granite & Marble

Wet or dry grinding for concrete, masonry and stone. For rapid stock removal.

Double Row Cup Abrasive Materials

Wet or dry grinding for granite, marble and stone. For rapid stock removal.

Turbo Cup Wheels

Radius cup wheel for shaping without sharp leading edge.Radius Turbo Cup Wheel M14

For wet grinding of granite, marble and stone.

Size M14 22.2mm Bore100mm DCUP001 DCUP003125mm DCUP002 DCUP004

Size M14 22.2mm Bore100mm DCUP007 DCUP010125mm DCUP008 DCUP011

Grade 50mm M14 100mm Q/R Snail30/40 DCUP013 DCUP01740/50 DCUP014 DCUP01860/80 DCUP015 DCUP020

Size M14100mm DCUP016

Size M14100mm DCUP025



73

Diamond Plates

Developed for rapid surface grinding/polishing of marble and slate

hese discs are

Diameter 250mm. Speed 500 to 800 rpm.

Rhino Radial Arm Polishing System

A premium surface grinding and polishing system for most types of granite. Can be used on a Jenny Lynd and other popular radial arm

Dia-Rap Radial Arm Polishing System

Radial arm grinding and polishing system for most types of granite.

Diameter 250mm.

Twister Radial Arm Polishing System

Stock Code DescriptionDRAP010 250mm Rhino Velcro Disc Metal Bond 40/50DRAP011 250mm Rhino Velcro Disc Metal Bond 150/170DRAP012 250mm Rhino Velcro Disc Resin 60 GreenDRAP013 250mm Rhino Velcro Disc Resin 120 BlackDRAP014 250mm Rhino Velcro Disc Resin 200 RedDRAP015 250mm Rhino Velcro Disc Resin 600 YellowDRAP017A 250mm Radial Arm QRS Adaptor

Stock Code DescriptionRAP001 250mm Dia-Rap Metal Bond Coarse VelcroRAP002 250mm Dia-Rap Metal Bond Fine VelcroRAP003 250mm Dia-Rap Resin 60 Green VelcroRAP004 250mm Dia-Rap Resin 120 Black VelcroRAP005 250mm Dia-Rap Resin 200 Red VelcroRAP006 250mm Dia-Rap Resin 400 Yellow VelcroRAP007 250mm Dia-Rap Resin 1000 White VelcroRAP008 250mm Dia-Rap Resin 2000 Blue VelcroRAP009 250mm Dia-Rap Resin 10000 Orange Velcro

DRAP017A 250mm Radial Arm QRS Adaptor

Stock Code DescriptionDRAP030 250mm Twister Plate 200 Black VelcroDRAP031 250mm Twister Plate 400 Red VelcroDRAP032 250mm Twister Plate 800 Yellow VelcroDRAP033 250mm Twister Plate 1500 White VelcroDRAP034 250mm Twister Plate 3000 Blue VelcroDRAP035 250mm Twister Plate Buff Orange VelcroDRAP017A 250mm Radial Arm QRS Adaptor



74

Diamond Plates & RoutersFor radial arm polishing machines.Diamond Polishing Plate

Parallel Routers Shank 12.7 x 45 mm

Vacuum Brazed Routers

Stock Code DescriptionDRAP001 250mm Diamond Plate Velcro Metal/Resin 50DRAP002 250mm Diamond Plate Velcro Metal/Resin 100DRAP020 250mm Diamond Plate Velcro Metal/Resin 200DRAP021 250mm Diamond Plate Velcro Metal/Resin 400DRAP003 250mm Diamond Plate Velcro Resin 200DRAP004 250mm Diamond Plate Velcro Resin 400DRAP005 250mm Diamond Plate Velcro Resin 800DRAP006 250mm Diamond Plate Velcro Resin 1500DRAP007 250mm Diamond Plate Velcro Resin 3000DRAP008 250mm Diamond Plate Velcro B/Buff

Stock Code DescriptionDIA110 8X30mm Marble Parallel Router 12.7mmDIA111 16X40mm Granite Parallel Router 12.7mm

Metal Resin

Resin

Stock Code DescriptionDIA120 R10 VTS B Profile Router M14 30/40DIA121 R15 VTS B Porifle Router M14 30/40

DIA121A R20 VTS B Profile Router M14 30/40DIA121B R30 VTS B Profile Router M14 30/40

Stock Code DescriptionDIA122 20mm VTS Dupont Router 30/40DIA123 30mm VTS Dupont Router 30/40

Stock Code DescriptionDIA124 20mm VTS Ogee Router 30/40DIA125 30mm VTS Ogee Router 30/40



75

Diamond Drills & CoresMetal bond with central water feed for drilling holes in granite andSolid Granite Pin Drill

Solga Granite Core Breaker

Granite Core Drills M14

Stock Code DescriptionDD001 5mm Granite Pin DrillDD002 6mm Granite Pin DrillDD003 7mm Granite Pin DrillDD004 8mm Granite Pin DrillDD005 10mm Granite Pin DrillDD006 12mm Granite Pin DrillDD007 15mm Granite Pin Drill

Stock Code DescriptionDD086 20mm Granite Drill M14DD087 25mm Granite Drill M14DD089 35mm Granite Drill M14

Kwik Cut CNC Granite Drill Thin Wall

Stock Code DescriptionDD090 14mm Kwik Cut CNC Granite Drill 1/2" BSP MaleDD091 20mm Kwik Cut CNC Granite Drill 1/2" BSP MaleDD092 25mm Kwik Cut CNC Granite Drill 1/2" BSP MaleDD093 30mm Kwik Cut CNC Granite Drill 1/2" BSP MaleDD094 35mm Kwik Cut CNC Granite Drill 1/2" BSP Male

Solid Granite Drill AdaptorsStock Code Description

AD006 Continental Adaptor 1/2" BSP - 10mmAD007 Diagrit Baby Waterchuck Adaptor - 10mmAD009 M14 Female - 10mm

Stock Code DescriptionDD060 20mm Granite Core Breaker DrillDD061 25mm Granite Core Breaker DrillDD062 31mm Granite Core Breaker DrillDD063 35mm Granite Core Breaker DrillDD064 42mm Granite Core Breaker Drill



76

Stock Code DescriptionFBIT001 20x40mm Finger Router 1/2" BSP Male

Stock Code DescriptionOMA128 40mm Segmented Cutter For Antarex OMA111 40mm Electroplated Cutter For Antarex



77

Standard 150mm working length,1/2” BSP Male. For wet use.

Stock Code Size (Diameter x Flute) BoreFL001 100x10mm Electroplated Flute Wheel 60/80 22.2mmFL002 100x12.7mm Electroplated Flute Wheel 60/80 22.2mmFL003 100x16mm Electroplated Flute Wheel 60/80 22.2mmFL004 250x12.7mm Electroplated Flute Wheel 60/80 60mmFL005 300x10mm Electroplated Flute Wheel 60/80 60mmFL006 300x12.7mm Electroplated Flute Wheel 60/80 60mmFL008 400x12.7mm Electroplated Flute Wheel 60/80 60mm

Colour 100x10mm 100x12mm 100x16mm 100x20mm60 Green FL010 FL017 FL024 FL031120 Black FL011 FL018 FL025 FL032200 Red FL012 FL019 FL026 FL033400 Yellow FL013 FL020 FL027 FL0341000 White FL014 FL021 FL028 FL0352000 Blue FL015 FL022 FL029 FL036

Felt FL016 FL023 FL030 FL037

Stock Code DescriptionFL040 10mm Dressing BlockFL041 12.7mm Dressing BlockFL042 16mm Dressing Block

Stock Code DescriptionDD010 14x150mm Diamond Core Drill 1/2" BSP MaleDD011 16x150mm Diamond Core Drill 1/2" BSP MaleDD012 18x150mm Diamond Core Drill 1/2" BSP MaleDD013 20x150mm Diamond Core Drill 1/2" BSP MaleDD014 22x150mm Diamond Core Drill 1/2" BSP MaleDD015 24x150mm Diamond Core Drill 1/2" BSP MaleDD016 25x150mm Diamond Core Drill 1/2" BSP MaleDD018 28x150mm Diamond Core Drill 1/2" BSP MaleDD020 30x150mm Diamond Core Drill 1/2" BSP MaleDD023 32x150mm Diamond Core Drill 1/2" BSP MaleDD024 35x150mm Diamond Core Drill 1/2" BSP MaleDD025 42x150mm Diamond Core Drill 1/2" BSP MaleDD026 52x150mm Diamond Core Drill 1/2" BSP MaleDD027 62x150mm Diamond Core Drill 1/2" BSP MaleDD028 82x150mm Diamond Core Drill 1/2" BSP MaleDD029 92x150mm Diamond Core Drill 1/2" BSP MaleDD030 102x150mm Diamond Core Drill 1/2" BSP Male



78

Electroplated Vanity Blade

Stock Code Size BoreDB001 100mm 16mmDB002 115mm 22mmDB003 125mm 22mmDB004 230mm 22mm

Stock Code Description BoreDB005 100mm Electroplated Vanity Blade 36/44 16mmDB006 115mm Electroplated Vanity Blade 36/44 22mmDB007 125mm Electroplated Vanity Blade 36/44 22mm

Stock Code Size Flange Diamond CoatDB009 125mm M14 2 SidesDB011 230mm M14 2 Sides

Stock Code Size BoreBD036 115mm 22.2mmBD017 125mm 22.2mmBD018 150mm 22.2mmBD019 230mm 22.2mm

Stock Code Size FlangeBD014 125mm M14BD016 230mm M14BD015 230mm 22.2mm D/C



79

stones. Dry use.Stock Code Size Bore

BD017B 125mm 22.2mmBD019B 230mm 22.2mm

stones. Dry use.

stone. Wet or dry use.

Stock Code Size FlangeBD014B 125mm M14BD016B 230mm M14BD015B 230mm 22.2mm D/C

Stock Code Size FlangeDB010 125mm M14

Dry Use.

Abrasive Materials Turbo Blade

Abrasive Materials Laser Blade

Stock Code Size BoreSD039 115mm 22.2mmSD040 125mm 22.2mmSD041 180mm 22.2mmSD042 230mm 22.2mmSD043 300mm 20.0mmSD044 350mm 20.0mmSD045 300mm 25.4mmSD046 350mm 25.4mm

Stock Code Size BoreSD022 115mm 22.2mmSD023 125mm 22.2mmSD024 150mm 22.2mmSD025 180mm 22.2mmSD026 230mm 20.0mmSD027 300mm 20.0mmSD028 350mm 25.4mm



80

For hard materials such as granite. Dry Use.Hard Materials Laser Blade

Hard Materials Turbo BladeStock Code Size Bore

SD029 115mm 22.2mmSD030 125mm 22.2mmSD031 150mm 22.2mmSD032 180mm 22.2mmSD033 230mm 22.2mm

Stock Code Size BoreSD001 115mm 22.2mmSD002 125mm 22.2mmSD003 150mm 22.2mmSD004 180mm 22.2mmSD005 230mm 22.2mmSD071 300mmSD006 350mm

Medium bond recommended for use on machines with 5HP+ motor,1400 RPM or 25mtrs/second. Wet Use. Standard bore 60mm.

G1 Premium Granite Silent Centre Blade

chipping on delicate work pieces. Recommended speed 2800 RPM or50mtrs/second. Wet Use. Standard bore 60mm silent.

Premium Marble Silent Centre Blade

Stock Code DescriptionBD040 300mm Premium Marble Wet Silent CentreBD041 350mm Premium Marble Wet Silent CentreBD042 400mm Premium Marble Wet Silent CentreBD043 450mm Premium Marble Wet Silent CentreBD044 500mm Premium Marble Wet Silent CentreBD045 600mm Premium Marble Wet Silent Centre

Stock Code DescriptionBD030 300mm G1 Premium Granite Silent Centre BD031 350mm G1 Premium Granite Silent Centre BD032 400mm G1 Premium Granite Silent Centre BD033 450mm G1 Premium Granite Silent Centre BD034 500mm G1 Premium Granite Silent Centre BD035 600mm G1 Premium Granite Silent Centre

granite slabs. Other sizes available on request.Stock Code Description

MW001 300x15mm Diamond Milling WheelMW002 300x20mm Diamond Milling WheelMW003 350x15mm Diamond Milling WheelMW004 350x20mm Diamond Milling Wheel

22.2mm22.2mm



81

Electric PolishersHarbro Standard Wet Polisher 110V

Harbro Professional Wet Polisher 110V

LW1202 Flex PolisherLW1503 Flex Polisher

LW802 VR Flex Polisher

L12-3 Flex Polisher LE12-3 Flex Polisher

Stock Code MC007Voltage 110VPower 1800WMax Disc 130mmRPM 800-2400Weight 4.3Kg

Stock Code MC006Voltage 110VPower 1600WMax Disc 130mmRPM 1750Weight 5.1Kg



Stock Code MC010AVoltage 110VPower 800WMax Disc 125MMRPM 500-4500Weight

Stock Code MC090Voltage 110VPower 900WMax Disc 125MMRPM 900-2800Weight

0V




82

Electric Polishers, Drill & Stand

1700W motor - 3 gears (930/1520/4270 RPM)Max Drill : 162mm wet drillingTool Fixture - 1/2” BSP Female & 1 1/4” UNC Male

Decibel Level: 97DbA

Blue Toro 150

Angling 0º - 45º Overall Height 900mm Drilling Height 650mm

Stabilia Mini Drill Rig

Manufactured to BS3535

- Glass reinforced polyester case

Industrial Transformers 240V—110V

Stock Code DescriptionMC031 3.3 KVA Industrial Transformer

Stock Code DescriptionSTABILIA RIG Stabilia Mini Drill Rig Professional

Stock Code DescriptionTORO 150 Blue Toro 150 Drill Motor 1700W 110V

L1503 VR Flex Polisher


MC002240V

1200W125mm

1200-37001.9Kg

A light weight dry Angle Grinder/PolisherL1506 VR Flex Polisher

Stock Code MC003Voltage 110VPower 1200WMax Disc 125mmRPM 2200-6800Weight 1.9kg

MC004240V

1200W125mm

2200-68001.9Kg

Safety vacuum cleaner, approved for dust class L, suitable for all dust with OEL value >1 mg/m³

FLEX SAFTEY VACUUM 110V

Stock Code DescriptionMC080 Flex Safety Vacuum 110V



83

OMA System

Stock Code DescriptionOMA002 Auctor CP99 Edge Profile Machine

Stock Code DescriptionOMA005 Antarex Cutting Machine

Stock Code DescriptionOMA007 Vega 4 Flexible Polishing MachineOMA008 Water Base For Vega 4

Stock Code DescriptionOMA003 Single Phase 4HP Hydraulic GearcaseOMA004 Three Phase 4HP Hydraulic Gearcase

CONDITIONS FOR THE SUPPLY OF GOODS

INTERPRETATIONThe definitions and rules of interpretation in this condition apply in these conditions.Buyer: the person, firm or company who purchases the Goods from Harbro.Contract: any contract between Harbro and the Buyer for the sale and purchase of the Goods, incorporating these conditions.Goods: any goods agreed in the Contract to be supplied to the Buyer by Harbro (including any part or parts of them).Harbro: Harbro Supplies Limited (CRN: 4081856)

1. APPLICATION OF TERMS1.1 The Contract together with any particulars set out in the Harbro quotation offer shall be on these conditions to the exclusion of all other terms and conditions (including any terms or conditions which the Buyer purports to apply under any purchase order, confirmation of order, specification or other document).1.2 These conditions apply to all Harbro's sales and any variation to these conditions and any representations about the Goods shall have no effect unless expressly agreed in writing by Harbro.1.3 Each order or acceptance of a quotation for Goods by the Buyer from Harbro shall be deemed to be an offer by the Buyer to buy Goods subject to these conditions.1.4 No order placed by the Buyer shall be deemed to be accepted by Harbro until a written acknowledgement of order is issued by Harbro or (if earlier) Harbro delivers the Goods to the Buyer.1.5 The Buyer shall ensure that the terms of its order and any applicable specification are complete and accurate.1.6 Any quotation is given on the basis that no Contract shall come into existence until Harbro despatches an acknowledgement of order to the Buyer.

2. PRICE2.1 Any quotation is subject to acceptance within 30 days only from its date, provided Harbro has not previously withdrawn it and is based upon shipment of the goods as soon as possible.2.2 The price payable for the goods will be Harbro’s current price list for the Goods at the time of delivery. All prices are subject to alteration by Harbro without notice to the buyer. Harbro reserves the right to correct any clerical or typographical errors made by employees at any time.2.3 The price for the Goods shall be exclusive of any value added tax and all costs or charges in relation to packaging, loading, unloading, carriage and insurance, all of which amounts the Buyer shall pay in addition when it is due to pay for the Goods.

3. TERMS OF PAYMENT3.1 Unless otherwise specifically agreed in writing, payment for products shall be made 30 days from date of invoice. Time of payment shall be of the essence and no payment shall be deemed to have been received until Harbro has received cleared funds.3.2 All payments payable to Harbro under the Contract shall become due immediately on its termination despite any other provision.3.3 The Buyer shall make all payments due under the Contract in full without any deduction whether by way of set-off, counterclaim, discount, abatement or otherwise unless the Buyer has a valid court order requiring an amount equal to such deduction to be paid by Harbro to the Buyer.3.4 If the Buyer fails to pay Harbro any sum due pursuant to the Contract, the Buyer shall be liable to pay interest to Harbro on such sum from the due date for payment at the annual rate of 3% above the base lending rate from time to time of the Bank of England plc, accruing on a daily basis until payment is made, whether before or after any judgment. Harbro reserves the right to claim interest under the Late Payment of Commercial Debts (Interest) Act 1998.3.4 Failure to make payment shall also entitle Harbro Supplies Limited to cancel any further deliveries

4. DELIVERY4.1 Unless otherwise agreed in writing by Harbro, delivery of the Goods shall take place at the delivery address specified by the Buyer (the Delivery Point).4.2 Any dates specified by Harbro for delivery of the Goods are intended to be an estimate and time for delivery shall not be made of the essence. If no dates are so specified, delivery shall be within a reasonable time.4.3 Subject to the other provisions of these conditions Harbro shall not be liable for any direct, indirect or consequential loss (all three of which terms include, without limitation, pure economic loss, loss of profits, loss of business, depletion of goodwill and similar loss), costs, damages, charges or expenses caused directly or indirectly by any delay in the delivery of the Goods (even if caused by Harbro's negligence), nor shall any delay entitle the Buyer to terminate or rescind the Contract unless such delay exceeds 180 days.4.4 If for any reason the Buyer fails to accept delivery of any of the Goods when they are ready for delivery, or Harbro is unable to deliver the Goods on time because the Buyer has not provided appropriate instructions, documents, licences or authorisations:

(a) risk in the Goods shall pass to the Buyer (including for loss or damage caused by Harbro's negligence);(b) the Goods shall be deemed to have been delivered; and(c) Harbro may store the Goods until delivery, whereupon the Buyer shall be liable for all related costs and expenses (including, without limitation, storage and insurance).

4.5 The Buyer shall provide at the Delivery Point and at its expense adequate and appropriate equipment and manual labour for loading the Goods.

5. INSPECTION5.1 The Buyer shall inspect the Goods immediately on delivery and shall notify Harbro, in writing, in the event of:

(a) damage or shortages: within 3 days of delivery of the consignment; or(b) any other matter or thing by reason whereof the Buyer alleges that the Goods are not in accordance with the Contract: within 14 days of the date of the invoice.

5.2 The quantity of any consignment of Goods as recorded by Harbro on despatch from Harbro's place of business shall be conclusive evidence of the quantity received by the Buyer on delivery unless the Buyer can provide conclusive evidence proving the contrary.5.3 Harbro shall not be liable for any non-delivery of Goods (even if caused by Harbro's negligence) unless the Buyer gives written notice to Harbro of the non-delivery within 14 days of the date when the Goods would in the ordinary course of events have been received.5.4 Any liability of Harbro for non-delivery of the Goods shall be limited to replacing the Goods within a reasonable time or issuing a credit note at the pro rata Contract rate against any invoice raised for such Goods.

6. RISK/TITLE6.1 The Goods are at the risk of the Buyer from the time of delivery.6.2 Ownership of the Goods shall not pass to the Buyer until Harbro has received in full (in cleared funds) all sums due to it in respect of:

(a) the Goods; and(b) all other sums which are or which become due to Harbro from the Buyer on any account.

6.3 Until ownership of the Goods has passed to the Buyer, the Buyer shall:(a) hold the Goods on trust for Harbo;(b) store the Goods (at no cost to Harbro) separately from all other goods of the Buyer or any third party in such a way that they remain readily identifiable as Harbro's property;(c) not destroy, deface or obscure any identifying mark or packaging on or relating to the Goods; and(d) maintain the Goods in satisfactory condition and keep them insured on Harbro's behalf for their full price against all risks to the reasonable satisfaction of Harbro. On request the Buyer shall produce the

policy of insurance to Harbro.6.4 Harbro shall be entitled to recover payment for the Goods notwithstanding that ownership of any of the Goods has not passed from Harbro.6.5 The Buyer grants Harbro, its agents and employees an irrevocable licence at any time to enter any premises where the Goods are or may be stored by the Buyer in order to inspect them, or, where the Buyer's right to possession has terminated, to recover them.6.6 On termination of the Contract, howsoever caused, Harbro's (but not the Buyer's) rights contained in this condition 6 shall remain in effect.

7. QUALITY7.1 Harbro warrants that (subject to the other provisions of these conditions) on delivery the Goods shall:

(a) be of satisfactory quality within the meaning of the Sale of Goods Act 1979;(b) be reasonably fit for any particular purpose for which the Goods are being bought if the Buyer had made known that purpose to Harbro in writing and Harbro has confirmed in writing that it is

reasonable for the Buyer to rely on the skill and judgement of Harbro.7.2 Harbro shall not be liable for a breach of the warranties in 7.1 unless:

(a) the Buyer gives written notice of the defect to Harbro, and, if the defect is as a result of damage in transit to the carrier, within 14 days of the time when the Buyer discovers or ought to have discovered the defect; and

(b) Harbro is given a reasonable opportunity after receiving the notice of examining such Goods.7.3 Harbro shall not be liable for a breach of the warranties in 7.1 if:

(a) the Buyer makes any further use of such Goods after giving such notice; or(b) the defect arises because the Buyer failed to follow Harbro's oral or written instructions as to the storage, installation, commissioning, use or maintenance of the Goods or (if there are none) good trade

practice; or(c) the Buyer alters or repairs such Goods without the written consent of Harbro.

7.4 Subject to condition 7.2 and condition 7.3, if any of the Goods do not conform with any of the warranties in condition 7.1 Harbro shall at its option repair or replace such Goods (or the defective part) or refund the price of such Goods at the pro rata Contract rate.7.5 If Harbro complies with condition 7.4 it shall have no further liability for a breach of any of the warranties in condition 7.1 in respect of such Goods.

8. LIMITATION OF LIABILITY8.1 Subject to condition 4, condition 5 and condition 7, the following provisions set out the entire financial liability of Harbro (including any liability for the acts or omissions of its employees, agents and sub-contractors) to the Buyer in respect of:

(a) any breach of these conditions, including any deliberate personal repudiatory breach OR any deliberate breach of these conditions by a party, or its employees, agents or subcontractors;(b) any use made or resale by the Buyer of any of the Goods, or of any product incorporating any of the Goods; and(c) any representation, statement or tortious act or omission including negligence arising under or in connection with the Contract.

8.2 All warranties, conditions and other terms implied by statute or common law (save for the conditions implied by section 12 of the Sale of Goods Act 1979) are, to the fullest extent permitted by law, excluded from the Contract.8.3 Nothing in these conditions excludes or limits the liability of Harbro:

(a) for death or personal injury caused by Harbro's negligence; or(b) under section 2(3), Consumer Protection Act 1987; or(c) for any matter which it would be illegal for Harbro to exclude or attempt to exclude its liability; or(d) for fraud or fraudulent misrepresentation.

8.4 Subject to condition 8.2 and condition 8.3:(a) Harbro's total liability in contract, tort (including negligence or breach of statutory duty), misrepresentation, restitution or otherwise, arising in connection with the performance or contemplated per

formance of the Contract shall be limited to the Contract price; and(b) Harbro shall not be liable to the Buyer for loss of profit, loss of business, or depletion of goodwill in each case whether direct, indirect or consequential, or any claims for consequential compensation

whatsoever (howsoever caused) which arise out of or in connection with the Contract.

9. CANCELLATIONThe Buyer may within 14 days of placing an order amend or cancel an order by written notice to Harbro. If the Buyer amends or cancels an order, its liability to Harbro shall be limited to payment to Harbro of all costs reasonably incurred by Harbro in fulfilling the order up until the date of amendment or cancellation, except that, where the amendment or cancellation results from the Harbro’s failure to comply with its obligations under the Contract, the Buyer shall have no liability to Harbro in respect of it.

10. ASSIGNMENT10.1 Harbro may assign the Contract or any part of it to any person, firm or company.10.2 The Buyer shall not be entitled to assign the Contract or any part of it without the prior written consent of Harbro.

11. FORCE MAJEUREHarbro reserves the right to defer the date of delivery or to cancel the Contract or reduce the volume of the Goods ordered by the Buyer (without liability to the Buyer) if it is prevented from or delayed in the carrying on of its business due to circumstances beyond the reasonable control of Harbro including, without limitation, acts of God, governmental actions, war or national emergency, acts of terrorism, protests, riot, civil commotion, fire, explosion, flood, epidemic, lock-outs, strikes or other labour disputes (whether or not relating to either party's workforce), or restraints or delays affecting carriers or inability or delay in obtaining supplies of adequate or suitable materials, provided that, if the event in question continues for a continuous period in excess of 180 days, the Buyer shall be entitled to give notice in writing to Harbro to terminate the Contract.

12. General12.1 Each right or remedy of Harbro under the Contract is without prejudice to any other right or remedy of Harbro whether under the Contract or not.12.2 If any provision of the Contract is found by any court, tribunal or administrative body of competent jurisdiction to be wholly or partly illegal, invalid, void, voidable, unenforceable or unreasonable it shall to the extent of such illegality, invalidity, voidness, voidability, unenforceability or unreasonableness be deemed severable and the remaining provisions of the Contract and the remainder of such provision shall continue in full force and effect.12.3 Failure or delay by Harbro in enforcing or partially enforcing any provision of the Contract shall not be construed as a waiver of any of its rights under the Contract.12.4 Any waiver by Harbro of any breach of, or any default under, any provision of the Contract by the Buyer shall not be deemed a waiver of any subsequent breach or default and shall in no way affect the other terms of the Contract.12.5 The parties to the Contract do not intend that any term of the Contract shall be enforceable by virtue of the Contracts (Rights of Third Parties) Act 1999 by any person that is not a party to it.12.6 This Contract and any dispute or claim arising out of or in connection with it or its subject matter or formation (including non-contractual disputes or claims) shall be governed by and construed in accordance with English law, and the parties submit to the exclusive jurisdiction of the English courts.



Documents

u } P } µ } + X · BR016 2 Knot Splash Brush Stock Code Description CL001 Artificial Sponge Stock Code Description BR010 3 Row Wire Brush BR011 4 Row Wire Brush BR013 3 Row Stainless