Upload
vanquynh
View
216
Download
3
Embed Size (px)
Citation preview
www.urt-resistors.com
AEC-Q200 . RoHS
1 Revision 13/02/2017
APPLICATIONS
FEATURES
• 5WconstantpowerpossibleinR0005.• 4terminalconnectionsforexceptionallyaccuratemeasurement.
• Excellentlongtermstabilityduetonatureofconstruction.
• Openframeelectronbeamweldedpunchedouttype.
• Currentsensorforpowerhybridapplications.• Automotiveapplicationsthatrequirehighcurrentcapability.
• Frequencyconvertors.• Powermodules.
ELECTRICAL AND ENVIRONMENTAL CHARACTERISTICS
PARAMETER / PERFORMANCE TEST & TEST METHOD PERFORMANCE REQUIREMENTS
PowerRating ForFeCrAl-Fullpowerdissipationat70°Candlinearlyderated tozeroat+170°C. ForManganin(<0.5%ImprovedStability)- Fullpowerdissipationat100°C&linearlyderatedtozeroat+140°C. ForManganin(<1%Stability)-Fullpowerdissipationat130°C andlinearlyderatedtozeroat+170°C.Inductance <3nHResistanceTolerance ±1%(0.5%andothertoleranceavailableonrequest)TemperatureRange -55°Cto+170°C(Suitablyderatedasperderatingcurveprovided)VoltageRating/Limiting/Max.WorkingVoltage PxR(Subjecttomax.TerminalTemperatureof120°C)LowTemperatureStorageandOperation[-65°Cfor24h] ΔR±0.1%-AverageTemperatureCoefficientofResistance From20ppm/K(DependingonResistanceValue)(AmbientTemperatureRange20°C-60°C)TemperatureCycling-2000cycles(-55°Cto150°C) ΔR±0.5%-AverageLifeTest/OperationalLife-2000hratedpowerwith ΔR±1%-Average(Incoveredcondition)TemperaturelimitationonTerminalkeptat120°CMoistureResistance[MIL-STD-202method108] ΔR±0.1%-AverageMechanicalShock[100g.6mshalfsine] ΔR±0.2%-TypicalVibration,HighFrequency[20g.10-2000Hz] ΔR±0.2%-TypicalBiasHumidity[+85°C,85%RH,1000h] ΔR±0.5%-Typical
UBE SERIESLOW OHM POWER RESISTORS
www.urt-resistors.com
AEC-Q200 . RoHS
2 Revision 13/02/2017
UBE SERIESLOW OHM POWER RESISTORS
DIMENSIONAL TABLE
Sr URT WATTAGE WATTAGE D1 (mm) INTERNAL HEAT TCR Typical wt . No. TYPE AT 100°C AT 70°C RESISTANCE (Rthi) (ppm) per pc (gms)
1 UBE7WR0007F 7W 12W 0.47±0.10 10°K/W <50 0.47
2 UBE5WR0002F 5W 12W 1.20±0.10 4°K/W <20 0.73
3 UBE5WR0005F 5W 9W 0.59±0.10 8°K/W <20 0.45
4 UBE5WR001F 5W 7W 0.33±0.10 15°K/W <50 0.30
5 UBE4WR002F 4W 7W 0.53±0.10 14°K/W <50 0.50
6 UBE3WR003F 3W 5W 0.35±0.10 21°K/W <50 0.31
7 UBE2WR004F 2W 4W 0.35±0.10 28°K/W <50 0.30
8 UBE2WR005F 2W 3W 0.35±0.10 33°K/W <50 0.28
RECOMMENDED PCB LAYOUT
PHYSICAL CONFIGURATION
Reflow,IRsoldering
Temperature(°C) 260 255 217
Time(Sec) Peak 40 90
RECOMMENDED SOLDER PROFILE
RECOMMENDED PCB - LAYOUT
PACKING
A. BULK Resistors shall be packed in sealed plastic packets with silica gel pouch placed in small cardboard cartons (Type ‘I’ Box ) of approximate size 70mmx70mmx70mm - 500pcs. & such 4 Boxes packed in (Type ’A’ Box ) of approximate size 200mmx150mmx70mm & 8 Boxes in (Type ‘B’ Box ) of approximate size 295mmx140mmx80mm. & such 36 Boxes of Type ’I’ or 6 Boxes of Type ‘A’ packed in Master Carton of approximate size 320mmx245mmx245mm.
B. TAPE & REEL PACKING
Storage Condition (Packed) : Temp 25°C to 35°C, Humidity 30 to 80% RH, Shelf life-12 months.
Floor Life (Unpacked) : Temp 25°C to 35°C, Humidity 30 to 80% RH, Floor life-15 days.
SPECIFICATION TAPEWIDTH PARTS PER REEL
EIA-481-D 16mm 1400 pcs
www.htr-india.com
LOW OHM POWER
RESISTORS
HBESERIES
Size 2725
Rev Date : 06/09/2016
I2I1
solder pods
5.67.
3
0.8
0.8
0.87.8
0.9
U U1 2
2
RECOMMENDED SOLDER PROFILE
Reflow, IR soldering
Temperature (°C) 260 255 217
Time (Sec) Peak 40 90
ORDERING INFORMATION
SERIES TyPE PACKING RESISTANCE VALUE TOLERANCE
HBE HBE5W / HBE5W* R001 F Bulk - HBE5W / HBE5W*
Tape & Reel - HBE5WTR / HBE5W*TR
e : [email protected]/4
MARKING
HTR PART NO PRINTING HBE7W* ROOO7 F HTR ROOO7 1% DATECODE
www.urt-resistors.com
AEC-Q200 . RoHS
3 Revision 13/02/2017
UBE SERIESLOW OHM POWER RESISTORS
TYPICALTEMPERATUREDEPENDANCEOFTHEELECTRICALRESISTANCE
TYPICALPOWERDERATINGCURVEFORRESISTORWHENFULLPOWERISAT100°C&130°C
TYPICALPOWERDERATINGCURVEFORRESISTORWHENFULLPOWERISAT70°C
IncasetheDesignEngineerrequiresaspecificgraphofaparticularcomponentitcanbesuppliedonrequest.
MAXIMUMPULSEENERGYWITHRESPECTTOPULSEPOWERFORPERMANANTOPERATION
Inthisgraphthemax.&min.curveareshownasandforallresistancevalues,theareabetweenthemax.&min.curveisapplicable.IncasetheDesignEngineerrequiresaspecificgraphofaparticularcomponentitcanbesuppliedonrequest.
www.htr-india.com
LOW OHM POWER
RESISTORS
HBESERIES
Size 2725
Rev Date : 06/09/2016
TYPICAL POWER DERATING CURVE FOR RESISTOR WHEN FULL POWER IS AT 100oC & 130oC
TYPICAL POWER DERATING CURVE FOR RESISTOR WHEN FULL POWER IS AT 70oC
In this graph the max. & min. curve are shown as and for all resistance values, the area between the max. & min. curve is applicable.In case the Design Engineer requires a specific graph of a particular component it can be supplied on request.
TYPICAL TEMPERATURE DEPENDANCE OF THE ELECTRICAL RESISTANCE
MAXIMUM PULSE ENERGY WITH RESPECT TO PULSE POWER FOR PERMANANT OPERATION
In case the Design Engineer requires a specific graph of a particular component it can be supplied on request.
•••
-40
1
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1-20 0 20 40 60 80 100 120
Temperature [°C]
dR/R20 [%]
Limiting Curve
Typical temperature dependence of a HBE resistor
140
1
0.75
0,5
0.25
00 20 40 60 80 100 120 140 160 180
1.25
Terminal Temperature [°C]Stability <1.0% (in covered condition)
Stability <0.5%
P [W]/PNom
Stability <1.0% (in covered condition)
1
0.75
0,5
0.25
00 20 40 60 8070 100 120 140 160 180
1.25
Terminal Temperature [°C]
P [W]/PNom
10000
1000
100
10
1
1
10000 1000
10 1000.0001
0.001
0.01
0.1
1
10
100
0.1
0.10.01
0.01
Pulse width [sec]
Puls
e en
ergy
[J]
Pow
er [W
]
4/4
www.htr-india.com
LOW OHM POWER
RESISTORS
HBESERIES
Size 2725
Rev Date : 06/09/2016
TYPICAL POWER DERATING CURVE FOR RESISTOR WHEN FULL POWER IS AT 100oC & 130oC
TYPICAL POWER DERATING CURVE FOR RESISTOR WHEN FULL POWER IS AT 70oC
In this graph the max. & min. curve are shown as and for all resistance values, the area between the max. & min. curve is applicable.In case the Design Engineer requires a specific graph of a particular component it can be supplied on request.
TYPICAL TEMPERATURE DEPENDANCE OF THE ELECTRICAL RESISTANCE
MAXIMUM PULSE ENERGY WITH RESPECT TO PULSE POWER FOR PERMANANT OPERATION
In case the Design Engineer requires a specific graph of a particular component it can be supplied on request.
•••
-40
1
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1-20 0 20 40 60 80 100 120
Temperature [°C]
dR/R20 [%]
Limiting Curve
Typical temperature dependence of a HBE resistor
140
1
0.75
0,5
0.25
00 20 40 60 80 100 120 140 160 180
1.25
Terminal Temperature [°C]Stability <1.0% (in covered condition)
Stability <0.5%
P [W]/PNom
Stability <1.0% (in covered condition)
1
0.75
0,5
0.25
00 20 40 60 8070 100 120 140 160 180
1.25
Terminal Temperature [°C]
P [W]/PNom
10000
1000
100
10
1
1
10000 1000
10 1000.0001
0.001
0.01
0.1
1
10
100
0.1
0.10.01
0.01
Pulse width [sec]
Puls
e en
ergy
[J]
Pow
er [W
]
4/4
www.htr-india.com
LOW OHM POWER
RESISTORS
HBESERIES
Size 2725
Rev Date : 06/09/2016
TYPICAL POWER DERATING CURVE FOR RESISTOR WHEN FULL POWER IS AT 100oC & 130oC
TYPICAL POWER DERATING CURVE FOR RESISTOR WHEN FULL POWER IS AT 70oC
In this graph the max. & min. curve are shown as and for all resistance values, the area between the max. & min. curve is applicable.In case the Design Engineer requires a specific graph of a particular component it can be supplied on request.
TYPICAL TEMPERATURE DEPENDANCE OF THE ELECTRICAL RESISTANCE
MAXIMUM PULSE ENERGY WITH RESPECT TO PULSE POWER FOR PERMANANT OPERATION
In case the Design Engineer requires a specific graph of a particular component it can be supplied on request.
•••
-40
1
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1-20 0 20 40 60 80 100 120
Temperature [°C]
dR/R20 [%]
Limiting Curve
Typical temperature dependence of a HBE resistor
140
1
0.75
0,5
0.25
00 20 40 60 80 100 120 140 160 180
1.25
Terminal Temperature [°C]Stability <1.0% (in covered condition)
Stability <0.5%
P [W]/PNom
Stability <1.0% (in covered condition)
1
0.75
0,5
0.25
00 20 40 60 8070 100 120 140 160 180
1.25
Terminal Temperature [°C]
P [W]/PNom
10000
1000
100
10
1
1
10000 1000
10 1000.0001
0.001
0.01
0.1
1
10
100
0.1
0.10.01
0.01
Pulse width [sec]
Puls
e en
ergy
[J]
Pow
er [W
]
4/4
www.htr-india.com
LOW OHM POWER
RESISTORS
HBESERIES
Size 2725
Rev Date : 06/09/2016
TYPICAL POWER DERATING CURVE FOR RESISTOR WHEN FULL POWER IS AT 100oC & 130oC
TYPICAL POWER DERATING CURVE FOR RESISTOR WHEN FULL POWER IS AT 70oC
In this graph the max. & min. curve are shown as and for all resistance values, the area between the max. & min. curve is applicable.In case the Design Engineer requires a specific graph of a particular component it can be supplied on request.
TYPICAL TEMPERATURE DEPENDANCE OF THE ELECTRICAL RESISTANCE
MAXIMUM PULSE ENERGY WITH RESPECT TO PULSE POWER FOR PERMANANT OPERATION
In case the Design Engineer requires a specific graph of a particular component it can be supplied on request.
•••
-40
1
0.8
0.6
0.4
0.2
0
-0.2
-0.4
-0.6
-0.8
-1-20 0 20 40 60 80 100 120
Temperature [°C]
dR/R20 [%]
Limiting Curve
Typical temperature dependence of a HBE resistor
140
1
0.75
0,5
0.25
00 20 40 60 80 100 120 140 160 180
1.25
Terminal Temperature [°C]Stability <1.0% (in covered condition)
Stability <0.5%
P [W]/PNom
Stability <1.0% (in covered condition)
1
0.75
0,5
0.25
00 20 40 60 8070 100 120 140 160 180
1.25
Terminal Temperature [°C]
P [W]/PNom
10000
1000
100
10
1
1
10000 1000
10 1000.0001
0.001
0.01
0.1
1
10
100
0.1
0.10.01
0.01
Pulse width [sec]
Puls
e en
ergy
[J]
Pow
er [W
]
4/4
www.urt-resistors.com
AEC-Q200 . RoHS
4 Revision 13/02/2017
PACKING
MARKING
A.BULKResistorsshallbepackedinsealedplasticpacketswithsilicagelpouchplacedinsmallcardboardcartons(Type‘I’Box)ofapproximatesize70mmx70mmx70mm-500pcs.&such4Boxespackedin(Type’A’Box)ofapproximatesize200mmx150mmx70mm&8Boxesin(Type‘B’Box)ofapproximatesize295mmx140mmx80mm.&such36BoxesofType’I’or6BoxesofType‘A’packedinMasterCartonofapproximatesize320mmx245mmx245mm.
B.TAPE&REELPACKING
UBE SERIESLOW OHM POWER RESISTORS
SPECIFICATION TAPEWIDTH PARTSPERREEL
EIA-481-D 16mm 1400pcs
StorageCondition(Packed):Temp25°Cto35°C,Humidity30to80%RH,Shelflife-12months.FloorLife(Unpacked):Temp25°Cto35°C,Humidity30to80%RH,Floorlife-15days.
URTPARTN° PRINTING
UBE7WR0007F URT R0007 1%DATECODE
ORDERING INFORMATION
SERIES TYPE PACKING RESISTANCEVALUE TOLERANCE
UBE UBE7W Bulk-HBE7W R001 F Tape&Reel-HBE7WTR
RECOMMENDED PCB - LAYOUT
PACKING
A. BULK Resistors shall be packed in sealed plastic packets with silica gel pouch placed in small cardboard cartons (Type ‘I’ Box ) of approximate size 70mmx70mmx70mm - 500pcs. & such 4 Boxes packed in (Type ’A’ Box ) of approximate size 200mmx150mmx70mm & 8 Boxes in (Type ‘B’ Box ) of approximate size 295mmx140mmx80mm. & such 36 Boxes of Type ’I’ or 6 Boxes of Type ‘A’ packed in Master Carton of approximate size 320mmx245mmx245mm.
B. TAPE & REEL PACKING
Storage Condition (Packed) : Temp 25°C to 35°C, Humidity 30 to 80% RH, Shelf life-12 months.
Floor Life (Unpacked) : Temp 25°C to 35°C, Humidity 30 to 80% RH, Floor life-15 days.
SPECIFICATION TAPEWIDTH PARTS PER REEL
EIA-481-D 16mm 1400 pcs
www.htr-india.com
LOW OHM POWER
RESISTORS
HBESERIES
Size 2725
Rev Date : 06/09/2016
I2I1
solder pods
5.67.
3
0.8
0.8
0.87.8
0.9
U U1 2
2
RECOMMENDED SOLDER PROFILE
Reflow, IR soldering
Temperature (°C) 260 255 217
Time (Sec) Peak 40 90
ORDERING INFORMATION
SERIES TyPE PACKING RESISTANCE VALUE TOLERANCE
HBE HBE5W / HBE5W* R001 F Bulk - HBE5W / HBE5W*
Tape & Reel - HBE5WTR / HBE5W*TR
e : [email protected]/4
MARKING
HTR PART NO PRINTING HBE7W* ROOO7 F HTR ROOO7 1% DATECODE