Upload
others
View
0
Download
0
Embed Size (px)
Citation preview
contr
ol
knobs
Control Knobs
Collet Knobs, Push-on
Knobs, Slider Knobs,
Pushbuttons and
Accessories
Whateveryouwant
quaConte
nts
Turnqualityto
C O L L E T K N O B S P U S H - O N K N O B S S L I D E R
Collet Knobs
Page 4–5
Installation/turning torques
Page 6
Two-colour soft touch ColletsPage 7
Accessories
Page 7
Conventional push-on knobs Page 8
Colour charts Page 9
Push-on knobs Page 10
Slider knobs and pushbuttons Page 12
alityAdd a touch of qualityto your product
SIFAM offers a wide variety of collet knobs, push-
on knobs, slider knobs, pushbuttons and
accessories. Together with our printing options
and custom moulding service, we can provide an
infinite number of permutations suitable for
almost any application.
Our control knobs are manufactured in a wide range of thermoplastic materials and have
function, style and handling as principle design factors. The quality ‘feel’ is unmistakable
and so adds to the quality of your product. This catalogue shows in detail the standard
range of types, sizes and colours for our collet knobs, push-on knobs, slider knobs,
pushbuttons, associated caps and accessories. All ordering codes and dimensional
information are included for fast and easy product selection.
Through our continuous efforts for ever better products and service to the customer, we
have earned many quality endorsements. Our Quality Management System is assessed to
BS EN ISO 9001.
Now is a good time to turn to quality – SIFAM quality!
If your product calls for a personal touch, we can cater for most control knob
requirements from design through to manufacture using the latest technology, including
3D CAD and multi-shot moulding. You are guaranteed expert attention throughout the
process. Function and styling criteria for all components can be customised.
Should your product require a standard combination from the existing range or a
custom designed control knob, the item can also be printed to meet your specific
application. The flexibility of the range and the varying levels of customisation make
SIFAM the number one manufacturer of control knobs.
Custom service forspecific requirements
Quality assured
K N O B S P U S H B U T T O N S A N D A C C E S S O R I E S
Classics
These items meet the needs of the general industrial and audio market for a soft touch finish as analternative to the traditional hard surface finish.
The 2 shot process, using polypropylene and thermoplastic elastomer, allows the indicator line to bemoulded rather than printed. Full details are specified on Page 7. The standard body colour is blackand the line, when specified, is white. Other colour combinations are available to order. Please referto Page 9.
Both items can be used as a dual concentric set.
6
Timeless ‘classics’
Function, styling, handling and simplicity of use are the
hallmarks of these quality control knobs.
BASETOP
10mm 13mm11mm 15mm15mm 21mm21mm 29mm
The main criteria in the design of collet knobs and accessories have always been function, styling,handling and simplicity of use. Accessories, including caps, pointers, figure dials and nut covershave been designed to push-fit into the collet knob body to give added versatility.
All collet knob bodies, caps, pointers and nut covers are manufactured in nylon with a finelytextured matt finish. Transparent figure dials are manufactured in polycarbonate, coloured dials arein nylon. Collets, housings and nuts, fitted into the knobs during manufacture, are of brass and willaccommodate a wide range of shaft lengths and bush lengths. All knobs shown are available inblack, or grey as standard. Other colours are available to order. Please refer to Page 9.
All collet knobs are designed to accept caps once fitted to the shaft.These with other accessories are detailed on Page 7 with availablecolours on Page 9.
Accessories
This table shows the knob combinations suitable for dual-concentricassemblies. Please contact the Sales Office for details of special through-hole collets, if required.
Dual Concentric Assemblies
Collet Knobs
Two colour soft-touch collet knobs
N.m
The maximum torque that should be applied tocollet nuts when installing them on a shaft isas follows:
Installation Torque
Knob Type2mm, 3mm, 4mmand 1/8 in
S10S11, SP11, K11S13
S15, SD15, SN15, SB15, SW15
0.294
0.784
K15,W15,K21,KP21,W21, K29,W29
S21, SP21, SB21, SW21S29, SP29, SB29, SW29S38, SC38
S47, SC47, SCF47
6mm, 1/4 inand 3/16 in
Shafts Shafts
The torque that can be transmitted by knobswithout slipping, assuming the knob has beenadequately tightened on the shaft, is as follows:
Turning Torque
N.m
1.471 1.471
0.784
N.m
Knob Type2mm, 3mm, 4mmand 1/8 in and 3/16 in
S10S11, SP11, K11S13
S15, SN15, SP15, SB15, SW15
0.245
0.392
K15, W15S21, SP21, SB21, K21, KP21, W21S29, SP29, SB29, SW29, K29, W29S38, SC38
S47, SC47, SCF47
6mm and 1/4 inShafts Shafts
N.m
0.588
0.784
1.176
ColletCollet knobs – the complete range
4
10mm 11mm 13mm
2mm3mm1/8 in4mm
Shaft size
S100S101
S110S111
S100 002S100 003S100 125S100 004
Plain
S101 002S101 003S101 125S101 004
With line
2mm3mm1/8 in4mm
Shaft size
S110 002S110 003S110 125S110 004
Plain
S111 002S111 003S111 125S111 004
With line
11mm
2mm3mm1/8 in4mm
Shaft size Shaft size
SP110 002SP110 003SP110 125SP110 004
Plain
SP111 002SP111 003SP111 125SP111 004
With line
11mm
3mm1/8 in4mm
Shaft size
K110 003K110 125K110 004
Plain
K111 003K111 125K111 004
With line
K110K111
Diagrams show cross-section of collets with shaft depths
SP110SP111
2mm3mm1/8 in4mm
S130 002S130 003S130 125S130 004
Plain
S131 002S131 003S131 125S131 004
With line
S130S131
15mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SB150 003SB150 125SB150 004SB150 187SB150 006SB150 250
Plain
SB151 003SB151 125SB151 004SB150 187SB150 006SB150 250
With line
SB150SB151
15mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SW150 003SW150 125SW150 004SW150 187SW150 006SW150 250
Plain
SW151 003SW151 125SW151 004SW151 187SW151 006SW151 250
With line
SW150SW151
15mm
Shaft size
3mm1/8 in4mm6mm1/4 in
W150 003W150 125W150 004W150 006W150 250
Plain
W151 003W151 125W151 004W151 006W151 250
With line
W150W151 21mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
S210 003S210 125S210 004S210 187S210 006S210 250
Plain
S211 003S211 125S211 004S211 187S211 006S211 250
With line
S210S211
29mm
Shaft size
3mm1/8 in4mm6mm1/4 in
W290 003W290 125W290 004W290 006W290 250
Plain
W291 003W291 125W291 004W291 006W291 250
With line
W290W291 38mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
S381 003S381 125S381 004S381 187S381 006S381 250
With line
S380S381
11mm
2mm3mm1/8 in4mm
Shaft size
SN110 002SN110 003SN110 125SN110 004
Plain
SN111 002SN111 003SN111 125SN111 004
With line
SN110SN111
38mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SC380 003SC380 125SC380 004SC380 187SC380 006SC380 250
Plain
Base Ø 10.0mmHeight (inc. cap) 14.0mmShaft Depth 7.0mm
Base Ø 29.5mmPointer R 19.0mmHeight (inc. cap) 22.3mmShaft Depth 15.0mm
Base Ø 38.0mmHeight (inc. cap) 18.0mmShaft Depth 10.5mm
Base Ø 38.0mmHeight (inc. cap) 18.0mmHeight (+crank) 31.0mmShaft Depth 10.5mm
Base Ø 15.5mmPointer R 10.2mmHeight (inc. cap) 14.3mmShaft Depth 7.0mm
Base Ø 15.5mmPointer R 10.2mmHeight (inc. cap) 14.3mmShaft Depth 7.0mm
Base Ø 15.5mmPointer R 10.5mmHeight (inc. cap) 22.1mmShaft Depth 12.0mm
Base Ø 21.5mmHeight (inc. cap) 17.7mmShaft Depth 10.0mm
Base Ø 11.5mmHeight (inc. cap) 14.0mmShaft Depth 7.0mm
Base Ø 11.5mmHeight (inc. cap) 22.1mmShaft Depth 11.5mm
Base Ø 14.2mmHeight (inc. cap) 17.5mmShaft Depth 9.2mm
Base Ø 11.5mmPointer R 6.9mmHeight (inc. cap) 14.0mmShaft Depth 7.0mm
Base Ø 13.5mmHeight (inc. cap) 14.1mmShaft Depth 7.0mm
S380 003S380 125S380 004S380 187S380 006S380 250
Plain
SC380
29mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SP290 003SP290 125SP290 004SP290 187SP290 006SP290 250
Plain
SP291 003SP291 125SP291 004SP291 187SP291 006SP291 250
With line
SP290SP291
21mm
Shaft size
3mm1/8 in4mm6mm1/4 in
KP210 003KP210 125KP210 004KP210 006KP210 250
Plain
KP211 003KP211 125KP211 004KP211 006KP211 250
With line
KP210KP211 21mm W210
W211 29mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
S290 003S290 125S290 004S290 187S290 006S290 250
Plain
S291 003S291 125S291 004S291 187S291 006S291 250
With line
S290S291
Shaft size
3mm1/8 in4mm6mm1/4 in
W210 003W210 125W210 004W210 006W210 250
Plain
W211 003W211 125W211 004W211 006W211 250
With line
Base Ø 29.5mmPointer R 18.8mmHeight (inc. cap) 17.9mmShaft Depth 10.5mm
Base Ø 21.5mmPointer R 14.0mmHeight (inc. cap) 24.0mmShaft Depth 16.0mm
Base Ø 21.5mmPointer R 14.0mmHeight (inc. cap) 22.1mmShaft Depth 15.0mm
Base Ø 29.5mmHeight (inc. cap) 17.9mmShaft Depth 10.5mm
15mm
Shaft size
3mm1/8 in4mm6mm1/4 in
K150 003K150 125K150 004K150 006K150 250
Plain
K151 003K151 125K151 004K151 006K151 250
With line
K150K151
Base Ø 15.5mmHeight (inc. cap) 22.1mmShaft Depth 12.0mm
5
15mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
S150 003S150 125S150 004S150 187S150 006S150 250
Plain
S151 003S151 125S151 004S151 187S151 006S151 250
With line
S150S151 15mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SD150 003SD150 125SD150 004SD150 187SD150 006SD150 250
Plain
SD159 003SD159 125SD159 004SD159 187SD159 006SD159 250
With arrow
SD150SD159
29mm
Shaft size
3mm1/8 in4mm6mm1/4 in
K290 003K290 125K290 004K290 006K290 250
Plain
K291 003K291 125K291 004K291 006K291 250
With line
K290K29129mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SW290 003SW290 125SW290 004SW290 187SW290 006SW290 250
Plain
SW291 003SW291 125SW291 004SW291 187SW291 006SW291 250
With line
SW290SW29129mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SB290 003SB290 125SB290 004SB290 187SB290 006SB290 250
Plain
SB291 003SB291 125SB291 004SB291 187SB291 006SB291 250
With line
SB290SB291SB293
47mm
Shaft size
6mm1/4 in
S470 006S470 250
Plain
S471 006S471 250
With line
Weighted
6mm1/4 in
SF470 006SF470 250
SF471 006SF471 250
S470S471SF470
SF471
21mm
Shaft size
3mm1/8 in4mm6mm1/4 in
K210 003K210 125K210 004K210 006K210 250
Plain
K211 003K211 125K211 004K211 006K211 250
With line
K210K211
21mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SP210 003SP210 125SP210 004SP210 187SP210 006SP210 250
Plain
SP211 003SP211 125SP211 004SP211 187SP211 006SP211 250
With line
SP210SP211 21mm SB210
SB211SB213
21mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SW210 003SW210 125SW210 004SW210 187SW210 006SW210 250
Plain
SW211 003SW211 125SW211 004SW211 187SW211 006SW211 250
With line
SW210SW211
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SB210 003SB210 125SB210 004SB210 187SB210 006SB210 250
Plain
SB211 003SB211 125SB211 004SB211 187SB211 006SB211 250
With line
15mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SN150 003SN150 125SN150 004SN150 187SN150 006SN150 250
Plain
SN151 003SN151 125SN151 004SN151 187SN151 006SN151 250
With line
SN150SN151
47mm
Shaft size
6mm1/4 in
SC470 006SC470 250
Plain
Weighted
6mm1/4 in
SCF470 006SCF470 250
SB151, SB211, SB291These can be supplied with line printing on both wings.To specify, replace last digit ‘1’ with ‘3’. eg: SB153
Ordering procedurePlease remember to quote the appropriate Collet knobsand accessory part number for each item according totype, size and plain or with line requirements. Pleasealso state the colour required when ordering. Availablecolours are referred to on Page 9.
PackagingCollet knobs and accessories are packed, as standard,in multiples of ten. For orders over one hundred pieces,items may be packed in bulk and quantity discountsare available.
Base Ø 46.7mmHeight (inc. cap) 19.3mmShaft Depth 15.0mm
Base Ø 46.7mmHeight (inc. cap) 19.3mmHeight (+crank) 32.0mmShaft Depth 15.0mm
Base Ø 29.5mmHeight (inc. cap) 22.3mmShaft Depth 15.0mm
Base Ø 29.5mmPointer R 18.8mmHeight (inc. cap) 17.9mmShaft Depth 10.5mm
Base Ø 29.5mmPointer R 18.8mmHeight (inc. cap) 17.9mmShaft Depth 10.5mm
Base Ø 21.5mmHeight (inc. cap) 22.1mmShaft Depth 15.0mm
Base Ø 21.5mmPointer R 13.8mmHeight (inc. cap) 17.7mmShaft Depth 10.0mm
Base Ø 21.5mmPointer R 13.8mmHeight (inc. cap) 17.7mmShaft Depth 10.0mm
Base Ø 21.5mmPointer R 13.8mmHeight (inc. cap) 17.7mmShaft Depth 10.0mm
Base Ø 15.5mmHeight (inc. cap) 14.3mmShaft Depth 7.0mm
Base Ø 29.0mmHeight (inc. cap) 18.2mmShaft Depth 10.1mm
Base Ø 18.6mmHeight (inc. cap) 18.2mmShaft Depth 10.1mm
SC470SCF470
15mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
SP150 003SP150 125SP150 004SP150 187SP150 006SP150 250
Plain
SP151 003SP151 125SP151 004SP151 187SP151 006SP151 250
With arrow
SP150SP151
Base Ø 15.5mmPointer R 10.2mmHeight (inc. cap) 14.3mmShaft Depth 7.0mm
ColletTwo colour soft touch collets
7
21mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
3/02/S210 0033/02/S210 1253/02/S210 0043/02/S210 1873/02/S210 0063/02/S210 250
Plain
3/02/S211 0033/02/S211 1253/02/S211 0043/02/S211 1873/02/S211 0063/02/S211 250
With line
3/02/S2103/02/S21115mm
Shaft size
3mm1/8 in4mm3/16 in6mm1/4 in
3/02/S150 0033/02/S150 1253/02/S150 0043/02/S150 1873/02/S150 0063/02/S150 250
Plain
3/02/S151 0033/02/S151 1253/02/S151 0043/02/S151 1873/02/S151 0063/02/S151 250
With line
3/02/S1503/02/S151
AccessoriesAccessories – part numbersPlease refer to Page 9 for available colours
10mm11mm13mm15mm21mm29mm38mm
Markings other than those shown are available to special order
Nut covers*
Figure Dials*
D110 D111 D112 D113 D114 D115 D116 D118 D119
Plain 0-11/30° 1-12/30° 0-9/36° 1-10/36° 0-5/60° 1-6/60° 300° Single WhiteArrow
D130 D131 D132 D133 D134 D135 D136 D138 D139D150 D151 D152 D153 D154 D155 D156 D158 D159D210 D211 D212 D213 D214 D215 D216 D218 D219D290 D291 D292 D293 D294 D295 D296 D298 D299D380 D381 D382 D383 D384 D385 D386 D388 D389
Ø = 24.0mmØ = 27.0mmØ = 29.0mmØ = 37.0mmØ = 47.0mmØ = 57.0mm
Pointers*Not applicable to typesSP, SB, SW and W
P110P100
P130P150P210P290P380
10mm11mm13mm15mm21mm29mm38mm
N110N130N150
N111N131N151
Plain With line
Stators*
R110
Adhesive Backed
R130R150R210R290R380
10mm11mm13mm15mm21mm29mm38mm
Caps
Tools
C110 C111 C112C100 C101 C102
C130 C131 C132C150 C151 C152C210 C211 C212C290 C291 C292C380 C381 C382 CF380
47mm C470 C471 C472 CF470
Plain With line With Spot Finger Recess
Tools are available for tightening the slottedcollars in 10, 11, 13 and 15mm knobs.
* Cannot be used with soft-touch collet knobs.
Base Ø 15.5mmHeight (inc. cap) 14.3mmShaft Depth 7.0mm
Base Ø 21.5mmHeight (inc. cap) 17.7mmShaft Depth 10.0mm
Ø
R
Ø
Ø
Ø = 14.0mmØ = 17.5mmØ = 18.5mm
R = 8.0mmR = 7.0mm
R = 9.5mmR = 10.5mmR = 14.0mmR = 19.0mmR = 24.0mm
Ø = 23.0mmØ = 26.0mmØ = 28.2mmØ = 36.0mmØ = 46.2mmØ = 56.0mm
8
Shaft configurationOur push-on knobs have been designed to provide a simple andsecure shaft attachment. The internal moulding grips the shaftsecurely, with ‘D’ shape, splined or slotted configurations. Some‘D’ shape shafts feature an integral metal compression ring.
Dual Concentric
‘D’ Shape Splined SlottedFlat size
As standard, line printing, if required, will be in the position detailed in the drawings below. Should you require alternative linepositioning, please state the location with your order. The printed line may be positioned centrally in any flute; flutes are atincrements of 60° on 11mm knobs, 45° on 15mm knobs, 36° on 21mm knobs and 30° on 29mm knobs.
The 15mm bar knob is shown below in the SIFAM standard form, with the wings perpendicular to the shaft ‘flat’. However, theangle of the wings to the ‘flat’ of the shaft may be altered by 45° increments if required.
11mmLine position in increments of 60°
from SIFAM standard(Moulded and printed to order)
line (standard) line (standard) line (standard) line (standard)line (standard)
29mmLine position in increments of 30°
from SIFAM standard(Moulded and printed to order)
15mmLine position in increments of 45°
from SIFAM standard(Moulded and printed to order)
21mmLine position in increments of 36°
from SIFAM standard(Moulded and printed to order)
15mm barLine position and/or wing position in
increments of 60° from SIFAM standard(Moulded and printed to order)
Line positioning for flatted shafts
Push-onConventional push-on knobs
11mm DA110/111DB110/111DR110/111TP110/111
11mm DAN110/111DPN110/111DRN110/111TPN110/111
11mm DRK110/111 11mm TPP110/111
15mm DA150/151DB150/151DC150/151DR150/151TP150/151
15mm15mm
15mm TPP150/151
DAN150/151DBN150/151DCN150/151DPN150/151TPN150/151
DAK150/151DBK150/151DCK150/151
15mm
15mm
21mm DA210/211DB210/211TP210/211
DANB150/151DBNB150/151 29mm DAK290/291
DBK290/291DQK290/291
DRD150/157
14.4
17.5
12.2
Ø14.2
22.0 14
.0
R6.9
14.6
10.3
18.2
14.022.1
17.7
14.3
18.2
13.8 22
.3
16.2
18.3
17.7
12.6
Shaft4mm4mm
Flat/Sp3mm2.5mm
DA110 004DB110 004
D shaft with compression ringPlain
DA111 004DB111 004
With line
6mm 4.5mm DR110 006D shaft without compression ring
DR111 006
6mm 18sp TP110 006Splined shaft without compression ring
TP111 006
Shaft4mm6mm6mm6mm1/4 in1/4 in
Flat/Sp3mm5mm4mm4.5mm5.54mm4mm
DA150 004DA150 006DB150 006DC150 006DA150 250DB150 250
D shaft with compression ringPlain
DA151 004DA151 006DB151 006DC151 006DA151 250DB151 250
With line
6mm 4.5mm DR150 006D shaft without compression ring
DR151 006
6mm 18sp TP150 006Splined shaft without compression ring
TP151 006
Shaft6mm6mm1/4 in
Flat/Sp5mm4mm5.54mm
DANB150 006DBNB150 006DANB150 250
D shaft with compression ringPlain
DANB151 006DBNB151 006DANB151 250
With line
Shaft6mm
Flat/Sp4.5mm DRD150 006
D shaft without compression ringPlain
DRD157 006With line
Shaft4mm6mm6mm1/4 in
Flat/Sp3mm5mm4mm5.54mm
DA210 004DA210 006DB210 006DA210 250
D shaft with compression ringPlain
DA211 004DA211 006DB211 006DA211 250
With line
4.55mm1/4 in
18sp24sp
TP210 180TP210 250
Splined shaft without compression ringTP211 180TP211 250
Shaft3/16 in6mm6mm1/4 in
Flat/Sp4mm5mm4mm5.54mm
DAK290 187DAK290 006DBK290 006DAK290 250
D shaft with compression ringPlain
DAK291 187DAK291 006DBK291 006DAK291 250
With line
6mm 4mm DQK290 006D shaft without compression ring
DQK291 006
Shaft4mm6mm6mm6mm1/4 in1/4 in
Flat/Sp3mm5mm4mm4.5mm5.54mm4mm
DAN150 004DAN150 006DBN150 006DCN150 006DAN150 250DBN150 250
D shaft with compression ringPlain
DAN151 004DAN151 006DBN151 006DCN151 006DAN151 250DBN151 250
With line
6mm1/4 in
5mm5.54mm
DPN150 006DPN150 250
D shaft without compression ringDPN151 006DPN151 250
4.55mm6mm1/4 in
18sp18sp24sp
TPN150 180TPN150 006TPN150 250
Splined shaft without compression ringTPN151 180TPN151 006TPN151 250
Shaft4mm6mm6mm6mm1/4 in
Flat/Sp3mm5mm4mm4.5mm5.54mm
DAK150 004DAK150 006DBK150 006DCK150 006DAK150 250
D shaft with compression ringPlain
DAK151 004DAK151 006DBK151 006DCK151 006DAK151 250
With line
Shaft6mm
Flat/Sp18sp TPP150 006
Splined shaft without compression ringPlain
TPP151 006With line
Shaft1/8 in4mm
Flat/Sp2.38mm3mm
DAN110 125DAN110 004
D shaft with compression ringPlain
DAN111 125DAN111 004
With line
4mm6mm
3mm4.5mm
DPN110 004DRN110 006
D shaft without compression ringDPN111 004DRN111 006
4.55mm6mm
18sp18sp
TPN110 180TPN110 006
Splined shaft without compression ringTPN111 180TPN111 006
Shaft6mm
Flat/Sp4.5mm DRK110 006
PlainDRK111 006With line
D shaft without compression ringShaft6mm
Flat/Sp18sp
Plain With lineSplined shaft without compression ring
TPP110 006 TPP111 006
A quality push-on knob manufactured in nylon, matching the style of the collet range, with afinely textured matt finish. All require a cap as per the collet range (other accessories cannot befitted). All knobs shown are available in black or grey as standard. Other colours are available toorder. Please refer to Page 9.
11 & 15mm knobs can be supplied for this application.Please contact sales office for details.
Two C
olo
ur S
lider K
nobs
Hard
or S
oft fin
ishBody
Line
Body
Pointer
Body
Line
✓
X
X
X
X
X
X
✓
✓
✓
✓
✓
✓
✓
X
X
X
X
X
X
✓
✓
✓
✓
✓
✓
X
X
X
X
X
X
✓
✓
✓
✓
✓
✓
Sin
gle C
olo
ur S
lider
Two C
olo
ur P
ush
-on
Knobs H
ard
or S
oft
finish
✓
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Push
butto
ns
✓
✓
✓
0
0
0
0
0
0
0
0
0
0
0
✓
0
0
0
0
Colours9
Colour Charts
Caps
Colo
ured
Fig
ure D
ials**
Item C
olo
ur
Prin
t Colo
ur**
Nut C
overs**
Poin
ters**
Sta
tors**
Conven
tional P
ush
-on K
nobs
✓
X
X
X
X
X
X
✓
✓
✓
✓
✓
✓
✓
✓
✓
X
X
X
X
✓
✓
✓
✓
✓
✓
X
✓
-
-
-
-
-
-
✓ ✓
✓
X
X
X
X
X
✓
X
X
X
X
X
X
✓
✓
✓
✓
✓
✓
✓
B
B
B
B
B
B
B
B
B
W
W
W
W
W
Black
Grey
Red
Green
Blue
Yellow
Orange
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
-
-
-
-
-
X
X
X
X
X
X
X
X
X
X
X
X
✓
✓
✓
✓
✓
✓
Mid Grey
Pale Blue
Cream
Lupin
Hopsack
Pastel Green
B
W
W
W
BW
W
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
-
-
-
-
-
-
X
X
X
X
X
X
X
X
X
X
X
X
✓
✓
✓
✓
✓
✓
Dark Grey
White
Peach
Bright Green
Bright Aqua
Magenta
✓ = Standard X = 1000 pcs minimum 0 = 5000 pcs minimum = White = Black ** = Not applicable to Soft Touch Collet knobs
0
✓
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Soft To
uch
Collet
knobs
✓
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Collet k
nobs
✓
✓
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
0
Push-on10
Push-on knobs – two colour in soft/hard touch
11mm
11mm
11mm
11mm
11mm
In addition to our conventional range of push-on knobs, we offer morespecialised items, each incorporating design features tailored to meet thechanging requirements of some customers. A two shot moulding processis used so that the cap/pointer is an integral part of the knob, thusavoiding subsequent assembly costs. Soft touch knobs are ofpolypropylene and thermoplastic elastomer to provide a smooth velvetfeel, the hard touch is all polypropylene.
11mm
10mm
12mm
3/046/04
3/03
13mm3/03
3/03
3/056/05
3/02
3/056/05
Colours
The standard body colour is Black. Other colours are available to order.Pointers are available in a wide range of colours. Please refer to Page 9 for colour options.
Ordering procedure
Please quote the part number and state required body and pointercolour. Available colours are referred to on Page 9. For special coloursplease contact the Sales Office. For items fitting to D shafts the pointerwill be positioned as standard opposite the flat. If alternative orientationis required please state the number of degrees clockwise from thestandard position when viewed from the top. Minimum quantity 1000.
Packaging
Push-on knobs will be packed in bulk.
11
Dimensions Part Number Shaft Style Description
3/03/TP110 006
3/03/DR110 006
3/02/TPN110 006 6mm SHAFT Ø,18 SPLINES
6mm SHAFT Ø,18 SPLINES
Traditional SIFAM styling in soft touch finish. Thepointer continues over to top centre of the knob bodyto provide accurate positioning without the moreprominent colour coding of the 3/02 series.
Traditional SIFAM styling with integral nut cover andsoft touch finish. The pointer continues over to the topcentre of the knob body. The top of the knob is colourco-ordinated with the pointer.
6mm SHAFT Ø,4.5mm FLAT SIZESpecify orientationof pointer to flat
4mm SHAFT Ø,3mm FLAT SIZESpecify orientationof pointer to flat
3/03/DP110 004
10.0 14
.4
Ø11.5
13.5 15
.9
4.0
Ø16.0Ø13.5
13.4 15
.9
4.0
Ø16.0Ø13.5
13.2 15
.9
4.3
Ø18.9Ø16.3
3/02/DRN110 006 6mm SHAFT Ø,4.5mm FLAT SIZESpecify orientationof pointer to flat
As above but with integral nut cover. Available in both 11mm and 13mm diameters.
3/03/TPN110 006 6mm SHAFT Ø,18 SPLINES
3/03/DRN110 006 6mm SHAFT Ø,4.5mm FLAT SIZESpecify orientationof pointer to flat
3/03/TPN130 006 6mm SHAFT Ø,18 SPLINES
3/03/DRN130 006 6mm SHAFT Ø,4.5mm FLAT SIZESpecify orientationof pointer to flat
3/04/TPP110 006
6/04/TPPN110 006
3/04/DRP110 006
6/04/DRNP110 006
10.8
16.8
Ø11.6
3/05/TPP100 006
6/05/TPP100 006
3/05/DRP100 006
6/05/DRP100 006
13.7 17
.1
2.3
Ø12.5
3/05/TPNP120 006
6/05/TPNP120 006
3/05/DRNP120 006
6/05/DRNP120 006
12.5 15
.0
2.2
Ø16.0Ø12.8
6mm SHAFT Ø,18 SPLINES
6mm SHAFT Ø,4.5mm FLAT SIZESpecify orientationof pointer to flat
6mm SHAFT Ø,18 SPLINES
6mm SHAFT Ø,4.5mm FLAT SIZESpecify orientationof pointer to flat
6mm SHAFT Ø,18 SPLINES
6mm SHAFT Ø,4.5mm FLAT SIZESpecify orientationof pointer to flat
Contemporary styling with pointer continuing to topcentre. With the smooth finish gripping pips areprovided around the top surface.The 3/04 Series has a soft touch finish and the 6/04 ahard finish.The 6/04 Series only is also available in a three colourversion. Please contact the Sales Office for availability.
Modern styling with integral nut cover and pointerextending over the top centre of the knob body.Available in both 10mm and 12mm body diameters.The 3/05 Series has a soft touch finish and 6/05 a hard finish.
FLAT SIZE
FLAT SIZE
FLAT SIZE
FLAT SIZE
FLAT SIZE
FLAT SIZE
FLAT SIZE
FLAT SIZE
Slider12
Slider knobs
PushbuttonsPushbuttons
SIFAM’s slider knobs are designed and shaped to provide a stylishappearance with ease of control. The extensive range, in a mattfinish, is intended to suit the needs of both applications and users.Various materials are used depending on the design. Where nylonis specified this will match the finish of other SIFAM control knobsand pushbuttons moulded in this material. Likewise soft touchversions will complement the rotary push-on knobs with the same finish.
Slider knobs are available, as standard, with black body mouldingsbut other colours are available. Lines whether printed or mouldedare supplied in white, as standard, but other colours are availableto order and can complement control knobs and pushbuttons, ifrequired. Available colours are referred to on Page 9. Apart fromthe tang sizes shown, others may be able to be accommodated.
Should you have a requirement not covered by our standard range,please contact the Sales Office.
Tang Details
01
02
03
04
08
02 LK11004 LK110
02 LK15004 LK150
Moulded in nylon the optional indicator line is printed onthe top only. The 04 model has an underhang for the 01 tang only.
(metal)
PLAIN 02 LK110 0104 LK110 01
WITH LINE 02 LK111 0104 LK111 01
PLAIN 02 LK150 0104 LK150 01
WITH LINE 02 LK151 0104 LK151 01
PLAIN 02 LK110 02
WITH LINE 02 LK111 02
PLAIN 02 LK150 02
WITH LINE 02 LK151 02
PLAIN 02 LK110 03
WITH LINE 02 LK111 03
PLAIN 02 LK150 03
WITH LINE 02 LK151 03
PLAIN 02 LK110 04
WITH LINE 02 LK111 04
PLAIN 02 LK150 04
WITH LINE 02 LK151 04
PLAIN 02 LK110 08
WITH LINE 02 LK111 08
PLAIN 02 LK150 08
WITH LINE 02 LK151 08
(metal)
(metal)
(metal)
(plastic)
SIFAM’s pushbuttons are moulded in a matt-finish nylon to match thestyle and appearance of other SIFAM control knobs. They are available,as standard, in black, grey, red and white. Other colours are availableto order, please refer to Page 9. Should you have a requirement notcovered by our standard range, please contact the Sales Office.
Special PrintingWe are happy to offer our printing facility to those customersrequiring special markings on our pushbutton products. Letters,numbers, symbols or logos may be printed to provide a high quality,durable, versatile and cost-effective added feature.
Please note that minimum order quantities apply to printedpushbuttons and other special requirements.
13
3/02 LK110 3/02 LK1504/02 LK110 4/02 LK150
Two shot, two colour soft touch finish with the outer bodymoulded in thermoplastic elastomer gives a smooth velvetfeel. The indicator line, moulded in polypropylene, extendsacross the top and both sides.
Two shot, two colour design is a variant of the 3/02 modelwith both the body and line moulded in nylon.
WITH LINE 3/02 LK150 01
WITH LINE 3/02 LK150 03
WITH LINE 3/02 LK150 04
WITH LINE 3/02 LK150 08
WITH LINE 3/02 LK110 01
WITH LINE 3/02 LK110 03
WITH LINE 3/02 LK110 04
WITH LINE 3/02 LK110 08
WITH LINE 4/02 LK150 01
WITH LINE 4/02 LK150 02
WITH LINE 4/02 LK150 03
WITH LINE 4/02 LK150 04
WITH LINE 4/02 LK150 08
WITH LINE 4/02 LK110 01
WITH LINE 4/02 LK110 02
WITH LINE 4/02 LK110 03
WITH LINE 4/02 LK110 04
WITH LINE 4/02 LK110 08
05 LK080 05 LK120
Moulded in nylon the optional indicator line is printed onthe top only.
PLAIN 05 LK080 03
WITH LINE 05 LK081 03
PLAIN 05 LK120 03
WITH LINE 05 LK121 03
PLAIN 05 LK080 04
WITH LINE 05 LK081 04
PLAIN 05 LK120 04
WITH LINE 05 LK121 04
15.6
11.6
11.6 15.6
Part Number Shaft Size (mm) Printing
PB 01/50/000 (RECESSED TOP)PB 01/51/000 (RECESSED TOP)PB 07/50/000 (FLAT TOP)PB 07/51/000 (FLAT TOP)
3.32.83.32.8
Maximum 1 line 6 characters2 lines 6 characters per line
Maximum 1 line 4 characters2 lines 4 characters per line
Maximum 1 line 4 characters2 lines 4 characters per line
Maximum 1 line 2 characters
Maximum 1 line 3 characters2 lines 2 characters per line
Maximum 1 line 2 characters
PB 02/50/000 (RECESSED TOP)PB 02/51/000 (RECESSED TOP)PB 08/50/000 (FLAT TOP)PB 08/51/000 (FLAT TOP)
3.32.83.32.8
PB 03/50/000 (RECESSED TOP)PB 03/51/000 (RECESSED TOP)PB 09/50/000 (FLAT TOP)PB 09/51/000 (FLAT TOP)
3.32.83.32.8
PB 04/50/000 (RECESSED TOP)PB 04/51/000 (RECESSED TOP)PB 10/50/000 (FLAT TOP)PB 10/51/000 (FLAT TOP)
3.32.83.32.8
4/001/PB 11/50/000 (FLAT TOP) 3.3
4/001/PB 11/51/000 (FLAT TOP) 2.8
Rectangular
Illuminated
Illuminated
Round/Tapered
Square
Cylindrical
SIFAM has a worldwide network of distributors, please contact the Sales Office for further details orrefer to our website at www.sifam.com under ‘distributors’.
All SIFAM Instruments Limited products are manufactured to the highest standards of quality. OurQuality Management System is assessed to ISO 9001. For further information, or Sales Literature onany of our products or customer service, please contact the Sales Office.
SIFAM Quality – Worldwide
Meters
A range of quality analogue and digital panel meters to meet the needs of manyindustries - from the best in the business! A quality electrical instrument canmake all the difference to your product's performance - and your reputation forquality. Talk to SIFAM. Available in a wide range of case designs and sizes forindustrial and professional audio applications. There is also an option ofmovements only being supplied for customers own cases.
Contract Manufacturing
SIFAM offers its extensive manufacturing resource to other companies requiringexternal production. Please contact the Sales Office for a consultation.
SIFAM INSTRUMENTS LIMITED
WOODLAND ROAD TORQUAY DEVON TQ2 7AY ENGLAND
TEL: 01803 407733 FAX: 01803 407740
[email protected] www.sifam.com
As part of our policy of
continuous product
improvement we reserve
the right to change
specifications at any time. MK1
050/
11/0
1/10
000U
K
Custom moulded controls design and production
Other SIFAM products and services
When your product needs a unique look, SIFAM will cater for mostrequirements from design through to manufacture. At every stage of the processyou are guaranteed expert attention.
We can work to a design concept specified by your product designer right fromthe initial consultancy stage. Almost any design can be produced in virtuallyany colour. If you are considering this as an option please contact the SalesOffice for further details.