Embed Size (px)
Citation preview
Modular-Systemfor Production andAssembly
Data and technical information to products andcomponents
Ordering catalog
TaM
asE
labo
Elabo TaMasProduction and assembly– in new efficiency!
Elabo TaMas is the universal system formanual and semi-manual tasks in thedevelopment and prototype making, inproduction and assembly. For the fieldsof electronics and electrical enginee-ring the sales program offers additio-nal advantages.The furniture range isavailable with conductive surface coa-ting (ESD).Furthermore, Elabo delivers assembledand fully wired up bench racks withmeasurement and test equipment.
The TaMas system is suitable to formsingle user workstations as well asarranging complex production andassembly lines, including the connec-tion to material and parts transfer faci-lities.
Elabo TaMas is an evolutionary system,it changes by the requests and taskswhich are put to the system. If youwant to carry out varying work con-tents and sequences quickly, or thepersons working on a workstationchange frequently due to shift-work:TaMas allows changes in a speedwhich virtually challenges comparisonswith other solutions.
Even if you redefine in principle thededication and the demands,TaMasfulfills the task by uncomplicatedadaptability.TaMas: versatile and growth capable asan intelligent organism.
2
System principle
3
System-channell vertical (P. 5)
Swivel arm 1-/2 fold (P. 10)
System-column Basiccomponent (P. 5) *
System-Kanal horizontal (P. 5) *
EM-X11-Worktop support (P. 6) *
System work topsupport crossarm(P. 6) *
Work tops (P. 7)Roller conveyors (P. 19)
System light (P. 12)
Shelf / Function shelf (P. 9)
Crossbar(P. 9)
Tool-Running-rail (P. 10)
Sideshelf (P. 11)
Patch-board (P. 9)
Underbenchcabinet (P. 6)
Footrestlarge (P. 13)
Power distributor System 60 (P. 14)
Assemblysheet metal (P. 6)
* Mandatorily required minimum basic components.
System column standard feature available in "RAL 7012 - basalt gray" alternative also in the hues " RAL 7035 light gray, "RAL 9006- white aluminum, " RAL 3000 - fiery red "or" RAL 5003 - sapphire blue". The individual components are delivered pre-assembled!
Ela
boTa
Mas
Grid-System TaMas
4
75
1280
745...1155
720
1600
400
2000
400
2400
150
650850
750
9501055
855
150
18001350 900
75
195015001050
18001350 900
195015001050
195015001050
18001350 900
18001350 900
195015001050
Work topgrid width
Systemgrid width
Work topgrid width
Systemgrid width
Starting up table Row table Ending up table
Individual table
Work topgrid width
Systemgrid width
123
34
Grid-System Width:Row table configuration
Grid-System Width:Individual table mounting
Grid-System Depth:Work topEM-X11-Work top support
Grid-System Height:System columnWork level
Ela
boTa
Mas
5
Ela
boTa
Mas
System-columnBasic component
Cat. No.
C1-0AC1-0BC1-0CC1-0D
System column basic elementwith allround multi-slot base extrusion. By the "Open-Space" concept the column is extandable at any time.System colum made from Inform extruded aluminum sec-tions with two integrated channels. A large supportingfoot plate serves for height levelling.Column width: W = 123 mmColumn depth: D= 34 mmPowder-coating color: RAL 7012or alternative colour schemes see P. 3System-grid height 2400: H = 2400 mmSystem-grid height 2000: H = 2000 mmSystem-grid height 1600: H = 1600 mmSystem-grid height 1280: H = 1280 mm
System-columnadd-on component
C1-0GC1-0H
System column basic elementwith allround multi-slot base extrusion. By the "Open-Space" concept the column is extandable at any time.System colummade from Inform extruded aluminum sec-tions with two integrated channelsColumn width: W = 123 mmColumn depth: D= 34 mmPowder-coating color: RAL 7012or alternative colour schemes see P. 3
System-add-on component: H = 720 mmSystem-add-on componentH = 400 mm
System-channelvertical
C1-0MC1-0NC1-0PC1-0Q
System-channel verticalto be fastened to the rear side of the system columns.Metal channel provides ample space for energy, compres-sed air and data lines and serves as additional traverse forheavy crossway loads of the Inform system column. Syn-thetic caps cover the extrusions.Channel width on the outside: W = 70 mmChannel depth on the outside: D = 40 mmPowder-coating color: RAL 7012System-grid height 2400: H = 1800 mmSystem-grid height 2000: H = 1400 mmSystem-grid height 1600: H = 1000 mmSystem-grid height 1280: H = 680 mm
System-channelhorizontal
C1-1JC1-1KC1-1L
System-channel horizontalto be fastened to the rear side of the system columns.Metal channel perforated for individual assembly possibili-ties. Provides ample space for energy, compressed airand data lines and serves as additional traverse for heavycrossway loads. Integrated cable outlet. Channel height on the outside: H = 80/260 mmChannel depth on the outside: D = 70/100 mmPowder-coating color: RAL 7035
System-grid height 1800: W = 1795 mmSystem-grid height 1350: W = 1345 mmSystem-grid height 900: W = 895 mm
System basic components
System basic componentsMetal underbench cabinets
6
EM-X11-Worktop support
System work topsupport crossarm
Metal suspendedunderbench cabi-netW = 350 mm
Metal suspendedunderbench cabi-netW = 215 mm
Cat. No.
C1-0TC1-0U
EM-X11-Work top supportthe work top support is screwed together with thesystem column. It can steplessly be changed in height. Alarge supporting foot plate at the front serves for heightlevelling.Height-adjustability range: 410 mmTotal support height lower part: H = 625 mmSupport width: W = 70 mmSupport height: H = 45 mmLoad per support: 160 kg max.Powder-coating color: RAL 7012
System grid depth 750: D = 650 mmSystem grid depth 950: D = 850 mm
C1-1AC1-1BC1-1C
System work top support crossarm (pair)for the mounting of table tops, spherical work tops and/orball table tops as well as additional longitudinal support.The support crossarm can optionally be mounted in thedepth of the work top support.Support height: H = 40 mmSupport depth: D = 40 mmPowder-coating color: RAL 7035
System-grid width 1800: W = 1798 mmSystem-grid width 1350: W = 1348 mmSystem-grid width 900: W = 898 mm
C1-2AC1-2BC1-2CC1-2HC1-2JC1-2K
Metal suspended underbench cabinet,W=350 mmfor the optional mounting at the work top support. Centrallocker. Drawers with telescopic guides, insides can be com-partmented.Underbench cabinet width:W = 350 mmUnderbench cabinet depth: D = 500 mmDrawer load capacity: 30 kg max.Powder-coating color carcass: RAL 70351-drawer, standard: H = 325 mm2-drawers, standard: H = 325 mm4-drawers, standard: H = 575 mm1-drawer, ESD: H = 325 mm2-drawers, ESD: H = 325 mm4-drawers, ESD: H = 575 mm
C1-2EC1-2FC1-2MC1-2NC1-2QC1-2R
Metal suspended underbench cabinet,W=215 mmfor the optional mounting at the work top support. Centrallocker. Drawers with telescopic guides, insides can be com-partmented.Underbench cabinet width:W = 215 mmUnderbench cabinet depth: D = 500 mmDrawer load capacity: 30 kg max.Powder-coating color carcass: RAL 70352-drawers, standard: H = 575 mm4-drawers, standard: H = 575 mm2-drawers, ESD: H = 575 mm4-drawers, ESD: H = 575 mmAssembly sheet metal for depth 750 mmAssembly sheet metal for depth 950 mm
Ela
boTa
Mas
Work tops
7
Work topbeech veneer
Cat. No.
C1-3x ZB
Work top beech plywood multiple-laminated work top made from beech veneer.Stress-resistant, suitable for extremely high loads. Surface treated with DD varnish.Edges: multiple laminatedTop thickness: T = appr. 30 mmColor: beech wood, subdued
Work top beech plywood:
Work topcoated
C1-3x ZD
Work top melamine resin coatedmelamine resin coated three-ply chipboard. External surfa-ces abraison and scratch-resistant. Fine surface struc-ture.Technical values to DIN EN 312. Chemical values to DIN 53799.Edges: 3 mm PP-edging stripWork top thickness: T = appr. 28 mmColor RAL 7035
Work top melamine resin coated:
Work topHPL-chipboard
C1-3x ZS
Work top HPL-chipboardwork top made from 3-ply chipboard both sides with lami-nated plastic (HPL). Temporarily temperature constant upto 180°C. Fine surface structure. Technical values to DINEN 312 and to DIN EN 438. Edges: 3 mm PP-edging stripTop thickness: S = appr. 30 mmColor: RAL 7035
Work top HPL-chipboard:
Work top ESDcoated
C1-3x ZDL
Work top ESD melamine resin coatedmelamine resin coated three-ply chipboard. External surfa-ces abraison and scratch-resistant. Fine surface struc-ture.Technical values to DIN EN 312. Chemical values to DIN53799. Volume and surfaces conductive to DIN EN100015.Edges: 3 mm PP-edging stripWork top thickness: T = appr. 28 mmColor: RAL 7035
Work top ESD melamine resin coated:
Work top ESDHPL-chipboard
C1-3x ZSL
Work top ESD HPL-chipboardwork top made from 3-ply chipboard both sides with lami-nated plastic (HPL). Temporarily temperature constant upto 180°C. Fine surface structure. Technical values to DINEN 312 and to DIN EN 438. Volume and surfaces conduc-tive to DIN EN 100015.Edges: 3 mm PP-edging stripWork top thickness: T = appr. 30 mmColor: RAL 7035
Work top ESD HPL-chipboard:
Letter for identification "x" in Cat. No. see matrix P. 8Ela
boTa
Mas
Work topCatalogue number matrix
8
Work topESDRubber coating
Cat. No.
C1-3x ZKL
Work top ESD rubber coatingmelamine resin coated, volume conductive 3-ply chip-board. Both sides with fine structure. Top side gummedup with conductive slide impeding rubber coating. Surfaceconductive to DIN EN 100015.Edges: 3 mm PP-edging strip
Color RAL 7035 Work top thickness: T = appr. 30 mmRubber thickness: T = appr. 2.1 mmColor: RAL 7030 Work top ESD rubber coating:
Top- Grid- Top- Beech- melamine- HPL- ESD-mel. ESD-HPL- ESD-Depth Width Width wood resin coated chipboard resin coated chipboard rubber coat.D = W = W = “ZB” “ZD” “ZS” “ZDL” “ZSL” “ZLK”
750 1800 1950 C1-3A ZB C1-3A ZD C1-3A ZS C1-3A ZDL C1-3A ZSL C1-3A ZKL750 1350 1500 C1-3C ZB C1-3C ZD C1-3C ZS C1-3C ZDL C1-3C ZSL C1-3C ZKL750 900 1050 C1-3E ZB C1-3E ZD C1-3E ZS C1-3E ZDL C1-3E ZSL C1-3E ZKL
950 1800 1950 C1-3N ZB C1-3N ZD C1-3N ZS C1-3N ZDL C1-3N ZSL C1-3N ZKL950 1350 1500 C1-3Q ZB C1-3Q ZD C1-3Q ZS C1-3Q ZDL C1-3Q ZSL C1-3Q ZKL950 900 1050 C1-3S ZB C1-3S ZD C1-3S ZS C1-3S ZDL C1-3S ZSL C1-3S ZKL
Work top Catalogue Number-matrix
- for individual work benches- for starting and ending up tables at row mounting
Top Grid- Top- Beech- melamine- HPL- ESD-mel. ESD-HPL- ESD-Depth Width Width wood resin coated chipboard resin coated chipboard rubber coat.D = W = W = “ZB” “ZD” “ZS” “ZDL” “ZSL” “ZLK”
750 1800 1800 C1-3B ZB C1-3B ZD C1-3B ZS C1-3B ZDL C1-3B ZSL C1-3B ZKL750 1350 1350 C1-3D ZB C1-3D ZD C1-3D ZS C1-3D ZDL C1-3D ZSL C1-3D ZKL750 900 900 C1-3F ZB C1-3F ZD C1-3F ZS C1-3F ZDL C1-3F ZSL C1-3F ZKL
950 1800 1800 C1-3P ZB C1-3P ZD C1-3P ZS C1-3P ZDL C1-3P ZSL C1-3P ZKL950 1350 1350 C1-3R ZB C1-3R ZD C1-3R ZS C1-3R ZDL C1-3R ZSL C1-3R ZKL950 900 900 C1-3T ZB C1-3T ZD C1-3T ZS C1-3T ZDL C1-3T ZSL C1-3T ZKL
- for connection work benches at row mounting
Letter for identification "x" in Cat.No. see matrix P. 8Ela
boTa
Mas
System expansion equipment
9
Shelf Cat. No.
C1-4AC1-4BC1-4C
Shelf D = 300 mmmade of sheet metal with lateral brackets. Shelf is adjusta-ble for height and steplessly inclinable up to 30°. Crossway stiffening is integrated. Front with 15 mm highnon-slip edge. Resilent at uniform load up to 40 kg.Shelf depth: D = 300 mmShelf height: H = 15/45 mmShelf color: RAL 7035Brackets color: RAL 7012
System-grid width 1800: W = 1670 mmSystem-grid width 1350: W = 1220 mmSystem-grid width 900: W = 770 mm
Function shelf
C1-4GC1-4HC1-4J
Function shelf, D = 500 mmmade of sheet metal with lateral brackets. Shelf is adjusta-ble for height and steplessly inclinable up to 30°. Crossway stiffening is integrated. The shelf can be adjustedby 120 mm in the depth. Front with 15 mm high non-slipedge. Resilent at uniform load up to 40 kg.Shelf depth: D= 500 mmShelf height: H = 15/45 mmShelf color: RAL 7035Bracket color: RAL 7012System-grid width 1800: W = 1670 mmSystem-grid width 1350: W = 1220 mmSystem-grid width 900: W = 770 mm
Patchboard
C1-4NC1-4PC1-4Q
Patchboardmade of sheet metal with Euro perforation for the takingof mounting and organizing components. Mountable atany height between the system columns.Patchboard depth: D= 30 mmPatchboard height: H = 341 mmPerforation: 9.2 x 9.2 mmGrid dimension: 38 mmPowder coating color: RAL 7035
System-grid width 1800: W = 1675 mmSystem-grid width 1350: W = 1225 mmSystem-grid width 900: W= 775 mm
Crossbar
C1-5AC1-5B
Crossbarfor mounting to the system column. Crossbar for the fit-ting of tool running rails and lighting fittings. By lengt-hways slits in the crossbar these parts are optionallymountable in the depth. Up to 25 kg resilient.Crossbar width outside: W = 70 mmCrossbar height outside: H = 40/100 mmPowder coating color: RAL 7012
System-grid width 750: D = 500 mmSystem-grid width 950: D = 700 mm
Ela
boTa
Mas
System expansion equipment
10
Tool-Running rail
Cat. No.
C1-4TC1-4UC1-4VC1-4W
Tool-Running railfor fitting small tools. Running rail incl. metal-slider withsnap hook running on ball bearings.Running rail depth: D = 32 mmRunning rail height: H = 30 mmPowder coating color: RAL 7035
Running rail with hook singleSystem-grid width 1800: W = 1730 mmSystem-grid width 1350: W = 1280 mmSystem-grid width 900: W = 830 mm
Swivel arm
C1-5DC1-5E
Swivel arm, 1fold and 2fold1fold swivel arm with two lockable pivots, 2fold swivelarm with three lockable pivots.On the front prepared for the mounting of universal adap-ters. Steplessly mountable in height. Up to 25 kg resilient.Swivel arm width: W = 20 mmSwivel arm height: H = 40 mmPivot distance: 280 mmPowder coating color: RAL 7012
Swivel arm 1fold: L = 300 mmSwivel arm 2fold: L = 600 mm
Original holder
C1-5NC1-5P
Original holder for swivel arm.for fitting at the universal mounting of the swivel arm. Inc-lination steplessly adjustable up to 15°. Original holder margin: 10 mmOriginal holder height: H = 330 mmPowder coating color: RAL 7035
Original holder 1: 1 x DIN-A4 W = 230 mmOriginal holder 2: 2 x DIN-A4 W = 460 mm
TFT-adapter
C1-5S
TFT-adapter for swivel arm.for fitting at the universal mounting of the swivel arm.Slope steplessly adjustable up to 15°. Adapter plate toVESA standard for 75 x 75 and 100 x 100 mm of feed holepitch. TFT adapter up to 25 kg resilient.Powder coating color:RAL 7035
TFT-adapter:
Ela
boTa
Mas
System expansion equipment
11
Side shelf Cat. No.
C1-5QC1-5R
Side shelf for swivel armfor fitting at the universal mounting of the swivel arm. Inc-lination steplessly adjustable up to 15°. Side shelf up to 25 kg resilient.Side shelf margin: H = 13 mmMaterial thickness: T = 3 mmPowder coating color: RAL 7035
Side shelf 1: W = 390, D = 250 mmSide shelf 2: W = 390, D = 300 mm
Suspensionextrusion
C1-5LC1-5M
Container suspension extrusion for swivel arm.for fitting at the universal mounting of the swivel arm. Forhanging up of grab containers. Slope steplessly adjustableup to 25°. Suspension extrusion up to 25 kg resilient.Suspension extrusion height: H = 34 mmSuspension extrusion depth: D = 40 mmPowder coating color: RAL 7035
Suspension extrusion 1: W = 350 mmSuspension extrusion 2: W = 450 mm
Suspensionextrusion
C1-5GC1-5HC1-5J
Container suspension extrusion for two swivel arms.for fitting at the universal mounting of two 2fold swivelarms. For hanging up of grab containers. Tridimensionaladjustment of the extrusion. Extrusion up to 30 kg resilient. Suspension extrusion height: H = 34 mmSuspension extrusion depth D = 40 mmPowder coating color: RAL 7035
System-grid width 1800 mm: W = 1455 mmSystem-grid width 1350 mm: W = 1005 mmSystem-grid width 900 mm: W = 555 mm
Suspensionextrusion
C1-5VC1-5WC1-5X
Container suspension extrusion for system column.for fitting between two system columns.For hanging up ofgrab containers. Suspension extrusion up to 40 kg resilient.
Suspension extrusion height: H = 34 mmSuspension extrusion depth: D = 40 mmPowder coating color: RAL 7035
System-grid width 1800 mm: W = 1795 mmSystem-grid width 1350 mm: W = 1345 mmSystem-grid width 900 mm: W = 895 mm
Ela
boTa
Mas
System-illumination
12
System lightfixturelengthwise
System light fixturecrosswise
Halogen spot-light
Cold-lightmagnifyingluminaire
Cat. No.
C1-6AC1-6BC1-6C
System light fixture lengthwise steplessly mountable in the depth of the crossbar. Com-pact fluorescent lamp with VVG, interior mirror and outside spacing bars for optimal luminous efficiency. Distur-bing dazzlings are avoided. The light fixture can be adjustedin height and inclination.
Adjustable height: 250 mmHeight of lighting fixture: H = 65 mmDepth of lighting fixture: D = 65 mmPowder coating color: RAL 7035System-grid width 1800: 1 x 36 WSystem-grid width 1350: 1 x 36 WSystem-grid width 900: 1 x 18 W
75-1M
System light fixture crossweisesteplessly mountable in the height of the system column.Compact fluorescent lamp with EVG, interior mirror andoutside spacing bars for optimal luminous efficiency.Disturbing dazzlings are avoided. The light fixture can beadjusted in inclination.Adjustable height: 250 mmHeight of lighting fixture: H = 95 mmDepth of lighting fixture: D = 65 mmLength of lighting fixture:L = 490 mmPowder coating color: RAL 7035
System light fixture 1 x 36 W
85-2G78-4D
Halogen spotlightwith two arms and three joints for exact adjustment. Particularly large radius by long arms. Low voltage trans-former integrated in the lower arm. Fastening by meansof 60 x 60 mm screw-on foot.Upper arm: 425 mmLower arm: 280 mmTurning angle: 360°Powder coating color: RAL 7035
Halogen spotlight: 1 x 20 WSystem column adapter:
85-1C78-4D
Cold-light magnifying luminairewith 220 mm reflektor diameter. 22 W annular fluorescentlamp. Diameter of magnifier 130 mm. 3 dioptres magnifi-cation. Low voltage transformer integrated in the lowerarm. Incluse clamp for assembly at the table top.Powder coating color: RAL 7035
Cold-light magnifying luminaire:System column adapter:
Ela
boTa
Mas
Laboratory trolleyFootrests
13
Laboratorytrolley
Trolley
Footrestsmall
Footrestlarge
Cat. No.
01-6A01-6U01-5U01-5V
Laboratory trolleymade from 30 x 30 mm tubular steel with 4 rubbercasters, 75 mm diameter, two of which are lockable.Table top and shelf made of 30 mm thick 3-ply chipbo-ard with 3 mm thick edging strip.Laboratory trolley width:W = 600 mmLaboratory trolley height.H = 780 mmTable top color: RAL 7035Powder coating color: RAL 7035Laboratory trolley standard: D = 900 mmLaboratory trolley standard: D = 1000 mmLaboratory trolley ESD:D = 900 mmLaboratory trolley ESD:D = 1000 mm
77-3A77-3A Z01
Trolley Inform Mobile.Base framework made of aluminium extruded sectionswith 4 twin casters 75 mm Ø , two if which are lockable.With fixed lower shelf (700 x 480 mm). The function shelves are adjustable in height and angle. Additionalheight extenders can be fitted any timeTrolley width: W = 780 mmTrolley depth: D = 700 mmTrolley height: H = 1000 mmColor of shelves: RAL 7035 Powder coating color: RAL 7012Trolley standard:Trolley ESD:
85-4L01-4EC1-6P
Footrest smallmade from impact-resistant polystyrene. Rugged surface.Integrated foot training device to support the blood circu-lation. Standard design light gray. ESD design black.Footrest width: W = 500 mmFootrest depth: D = 370 mmFootrest height: H = 45/100 mm
Footrest standard:Footrest ESD:Metal footrest ESD:
85-4N85-4N Z01
Footrest largemade from 40 x 40 mm tubular steel. Foot support 520 x 350 mm with rubber surface. Adjustable in height bet-ween 150 to 400 mm and in inclination. Four verticallyheight adjusters for leveling of the footrest.Footrest width: W = 540 mmFootrest depth: D = 440 mmFootrest height: H = 500 mm
Footrest standard:Footrest ESD:
Ela
boTa
Mas
Power Distributor System 60
14
Power distribu-torSystem 60
Cat. No.
C1-7AC1-7BC1-7C
Power distributor System 60Power distributor System 60 made of sheet metal toaccept power supply, data and compressed air supplyunits. The distributor is fitted steplessly as an elevatedmodular structur between System columns.Distributor height: H = 62 mmDistributor depth: D = 74 mmPowder coating color: RAL 7035System-grid width 1800: W= 1675 mmSystem-grid width 1350: W = 1225 mmSystem-grid width 900: W = 775 mm
Power supplypanelSystem 60
C1-8AC1-8B
Power supply panel System 60incl. mains input plug to the power line and directly linkedmains output jack. The electrical outlets are mounted by45° revolved to accept elbow plugs. Panel made ofimpact-resistant, halogen free synthetic material, black.3 x (5 x) Schuko-socket outlets
Supply panel 3 outletsSupply panel 5 outlets
Power supplypanelSystem 60
C1-8CC1-8D
Power supply panel System 60incl. mains input plug to the power line and directly linkedmains output jack. The electrical outlets are mounted by45° revolved to accept elbow plugs. Panel made ofimpact-resistant, halogen free synthetic material, black.3 x (5 x) Schuko-socket outlets1 x 2pole, illuminated On/Off switch
Supply panel 3 outletsSupply panel 5 outlets
Power supplypanelSystem 60
C1-8EC1-8F
Power supply panel System 60incl. mains input plug to the power line and directly linkedmains output jack. The electrical outlets are mounted by45° revolved to accept elbow plugs. Panel made ofimpact-resistant, halogen free synthetic material, black.4 x outlets, 1 x 2pole, illuminated On/Off switch 1 x Emergency Off, not wired upalternatively 1 x RJ45 Cat5, not wired upSupply panel Emergency Off 4 outletsSupply panel RJ45 Cat 5 4 outlets
Power supplypanelSystem 60
C1-8GC1-8H
Power supply panel System 60incl. mains input plug to the power line and directly linkedmains output jack. The electrical outlets are mounted by45° revolved to accept elbow plugs. Panel made ofimpact-resistant, halogen free synthetic material, black.3 x (5 x) outlets, 1 x 2pole, illuminated On/Off switch 2 x 10 A automatic circuit breakers
Supply panel 3 outletsSupply panel 5 outlets
Ela
boTa
Mas
Power Distributor System 60
15
Power supplypanelSystem 60
Cat. No.
C1-8JC1-8K
Power supply panel System 60incl. mains input plug to the power line and directly linkedmains output jack. The electrical outlets are mounted by45° revolved to accept elbow plugs. Panel made ofimpact-resistant, halogen free synthetic material, black. 3x (5 x) outlets1 x 2pole, illuminated On/Off switch 2 x 10 A automatic circuit breakers1 x earth leakage circuit breaker 25 A/ 30 mASupply panel 3 outletsSupply panel 5 outlets
Power supplypanelSystem 60
C1-8PC1-8QC1-8RC1-8SC1-8Q Z01C1-8Q Z02
Power supply panel System 60Module with unwired emergency off button (2 x N/C). Module with outlet 2fold RJ45 Cat 5 screened.Module with quick acting compressed air couplings. Module with NFN communication interface.System panel Emergency OffSystem panel 2fold RJ45 Cat 5System panel 2fold compressed air NW 5System panel 2fold compressed air NW 7.2System panel 3fold NFNSystem panel 2fold RJ45 and 3fold NFN
Distribution boxSystem 60
C1-8TC1-8U
Distribution box System 601phase (plug system GST18):1 x mains input plug 1phase6 x output jacks 1phase (6 x L1)1 x mains output jack 1phase3phase (plug system GST 18):1 x mains input plug 3phase6 x output jacks 1phase (2 x L1, 2 x L2, 2 x L3)1 x mains output jack 3phaseDistribution box 1phaseDistribution box 3phase
Mains supplycableSystem 60
C1-8V xx
Mains supply cable System 60Cable 1.5 mm2. One end with safety contact plug. Otherside with mains output jack (GST 18) for the directly bon-ding of the socket strip or the 1phase distribution box.Length 200 cm C1-8V ZL200Length 300 cm C1-8V ZL300Length 400 cm C1-8V ZL400Mains supply cable 1phasePlease, complete the identification xx at the Cat. No. by theadditional remark (e.g. for length of 300 mm) ZL300!
Mains supplycableSystem 60
C1-8W xxC1-8XC1-8Y
Mains supply cable System 60Cable 1.5 mm2. One end with safety contact plug. Otherside with mains output jack (GST 18) for the directly bon-ding of the socket strip or the 1phase distributor box. Plugsystem GST 18.Length 50 cm C1-8W ZL50Length 100 cm C1-8WZL100Length 250 cm C1-8WZL250Mains supply cable 1phasePlug, individual 1phaseJack, individual 1phase
Ela
boTa
Mas
Power Distributor System 110
16
Power distribu-torSystem 110
Cat. No.
C1-7KC1-7LC1-7M
Power distributor System 110Inform aluminium distributor System 110 to accept frontand supply panels. The distributor is fitted steplessly as anelevated modular structure between System columns. Incl.adapter panel. (Width Unit WU = 146 mm)Distributor height: H = 115 mmDistributor depth: D = 120 mmPowder coating color: RAL 7035System-grid width 1800: 11 WUSystem-grid width 1350: 8 WUSystem-grid width 900: 5 WU
Mains supplypanelSystem 110
11-3D
Mains supply panel System 110completely wired up and equipped with:1 keyswitch1 earth leakage circuit breaker 30 mA/ 25 A1 motor protection switch 10...16 A
with undervoltage trip1 phase indicator lamp
Mains supply panel 2 WU
Mains supplypanelSystem 110
11-3F
Mains supply panel System 110completely wired up and equipped with:1 keyswitch1 earth leakage circuit breaker 30 mA/ 25 A1 motor protection switch 10...16 A
with undervoltage trip1 phase indicator lamp2 socket outlets3 safety lab terminals L1, N, PE (4 mm)
Mains supply panel 4 WU
Emergency OffSystem 110
11-3P
Emergency Off buttonequipped with:1 not wired up emergency push button
with locking and yellow ring
Emergency Off push button 1 WU
11-3
P
Emergency Stop
Socket outletsSystem 110
11-3H11-3K11-3L
Earth safety sockets (German standard)completely wired up and equipped with:2 socket outlets Typ 11-3H4 socket outlets Typ 11-3K5 socket outlets with On/Off switch Typ 11-3L
2 socket outlets 1 WU4 socket outlets 2 WU5 socket outlets 4 WU
Ela
boTa
Mas
Power Distributor System 110
17
AC/DC supplySystem 110
Cat. no.
11-4N
AC-/DC supply, adjustablecompletely wired up and equipped with:
3 automatic circuit breakers1 rectifier in bridge connection
10 safety lab terminals1 illuminated rocker switch
0... 12 V/ 12 A floating0... 12 V/ 12 A floating0... 24 V/ 6 A floating0... 260 V/2 A not floatingAC-/DC supply adjustable 2 WU
DC stabilizerSystem 110
11-5L
DC-double stabilizer, adjustablecompletely wired up and equipped with:2 digital volt/ampere meter2 display switchover voltage/current4 safety lab terminals4 potentiometer for voltage /current limitation2 overload LED’s1 illuminated rocker switch2 x 0..30 V/ 0...1 ADC-double stabilizer, adjustable 2 WU
Soldering stationSystem 110
11-6M
Soldering stationcompletely wired up and equipped with:1 temperature regulating potentiometer1 LED1 soldering connecting socket1 potential compensation socket3 socket outlets1 illuminated rocker switchIncl. 50 W soldering iron and holder.Elektronic temperature regulation 150...400° CSoldering station 50 W 4 WU
Pressurized airsupplySystem 110
11-6K
Pressurized air supplycompletely with tube installation and equipped with:1 valve1 pressure regulator 0.5...10 bar1 pressure indicator 0...10 bar, class 1.63 self sealing connection sockets NW 51 hose 6/4 mm (0.5 mm)
for on-site connection
Pressurized air supply 4 WU
Blank panelsSystem 110
11-3C11-3B11-3A
Blank panelsmade of 3 mm aluminium, powder coated on both sides,color panel-white in panelweiß
Blank panel W = 146 mm 1 WUBlank panel W = 293 mm 2 WUBlank panel W = 586 mm 4 WU
Ela
boTa
Mas
Rotating surfaceBalancer
18
Rotating surface
Cat. No.
78-4G78-4H
Rotating surfaceon both sides with rubber mat with honey-comppattern.Diameter: 380 mmLoad capacity: 100 kgColor: black
Rotating surface standard:Rotating surface ESD:
Spring pull
78-4Q
Spring pullwith steel housing and adjustable load. Top part with han-ging eye, lower part with snap hook.Carrying load: 1...2 kgRope length: 1.5 m
Spring pull
Spring pullcompressed air
78-4R
Spring pull compressed airwith adjustable load. Input via quick coupling, output withquick acting coupling NW 5. Top part with hanging eye.Carrying load: 0.5...1.0 kgRope length: 0.9 m
Spring pull compressed air
Service unit
78-4L
Service unitwith pressure gauge, regulator, water separator and oilmisting unit. Output via quick acting coupling NW 5.
Service unit compressed air
Spiral hose
78-4M
Spiral hosemade from polyamide with quick acting coupling andconnection NW 5 and anti-kink device.
Hose length: 2.5 m
Spiral hose compressed air
Ela
boTa
Mas
Hook assortmentsfor patchboards ExhausterRoller conveyors
19
Hook assort-ment for patch-boards
Cat. No.
C1-6M
C1-6N
81-8P Z03C1-5K
Hook assortment for patchboardsfor patchboards with Euro perforation. Hook made of gal-vanized steel. With off-hook safety mechanism. Hook assortment 1 consisting of: 20 parts
5 single hooks with, 5 double hooks D = 75 mm10 single tool holder with D = 6...51 mm
Hook assortment 2 consisting of: 11 parts5 single hooks, 5 double hooks D = 75 mm1 Spanner support 7-fold
Tool holder for patchboard19 latchesBox rail for patchboard W = 450 mm
Exhauster arm
C1-6KC1-6LC1-6HC1-6J
Exhauster arm with 3fold jointAluminum tube exhauster arm with NW 50 mm. Threesynthetic material joints allow adjustment to any requiredposition. Built-in valve to reduce current flow of air. Fronttube nozzle.Tube nominal width: 50 mmArm reach: 750 mmClamp for exhauster arm:System-column support for exhauster arm:Exhauster arm 3-joint standard:Exhauster arm 3-joint ESD:
Roller conveyorwidth 300 mm
C1-7R xx
Roller conveyor width 300 mmRollers with supporting pipe made of high impact-resistantsynthetic material. Easy movable synthetic bearing with ballrow. Metal frame from channel profile 20x60 mmRoller diameter: D = 50 mmRoller width: W = 300 mmTotal width: W = 340 mmRoller partition: P = 75 mmRoller load: 30 kg max.Length 1000 mm C1-7R ZL100Roller conveyor width 300 mm ZLxx = Lenght
Roller conveyorwidth 500 mm
C1-7S xx
Roller conveyor width 500 mmRollers with supporting pipe made of high impact-resistantsynthetic material. Easy movable synthetic bearing with ballrow. Metal frame from channel profile 20x60 mmRoller diameter: D = 50 mmRoller width: W = 500 mmTotal width: W = 540 mmRoller partition: P = 75 mmRoller load: 30 kg max.Length 1000 mm C1-7S ZL100Roller conveyor width 500 mm ZLxx = Length
Ball table
C1-7VC1-7WC1-7X
Ball tablewith running balls to transfer, turn and distribute. Ball easyrunnig in a sheet-iron casing and integrated in the baseplate.Ball diameter: D = 15 mmBall partition: P = 75 mmBall load: 50 kg max.
Ball table 300 x 300 mmBall table 500 x 500 mmBall table 500 x 300 mm
Driven, controlled transport systems on requestEla
boTa
Mas
Swivel chairs
20
Swivel chairSintec
Swivel chairSintec-high
Swivel chairSintec accesso-ries
Swivel chairbeech wood
Cat. No.
05-4A05-4B05-4K Z0105-4L Z0105-4A Z0205-4B Z0205-4K Z0205-4L Z02
Swivel chair Sintecwith permanent contact backrest (perm.) or alternativelywith seat and backrest in synchronous technology (synch.).Seat height adjustment from 430 to 580 mm. Seat andbackrest made of unbreakable polypropylene. Please orderseat and backrest upholsteries separately.Swivel chair with gliders perm. standardSwivel chair with casters perm. standardSwivel chair with gliders perm. ESDSwivel chair with casters perm. ESDSwivel chair with gliders synchr. standardSwivel chair with casters synchr. standardSwivel chair with gliders synchr. ESDSwivel chair with casters synchr. ESD
05-4A Z0305-4K Z0305-4B Z0305-4L Z03
Swivel chair Sintec-highwith permanent contact backrest (perm.) or alternativelywith seat and backrest in synchronous technology (synch.)Seat height adjustment from 580 to 850 mm with ascenthelp. Seat and backrest made of unbreakable polypropyle-ne. Please order seat and backrest upholsteries separate-ly.
Swivel chair with gliders perm. standardSwivel chair with gliders perm. ESDSwivel chair with gliders synchr. standardSwivel chair with gliders synchr. ESD
05-4E 05-4E Z0105-4F 05-4F Z0105-4H 05-4H Z01
Swivel chair Sintec accessoriesDurable integral foam cushion. Easy to clean and resistant to light acids. Breathing active textile upholstery made from 100% Trevira fabric.Closed ring armrest made of synthetic material. Adjusta-ble in width by 20 mm.
Integrals foam upholstery blue standardIntegrals foam upholstery black ESDTextile upholstery black standardTextile upholstery black ESDRing armrest black standardRing armrest black ESD
05-3A05-3B
Swivel chair lamiated beech woodwith anatomically designed seat and backrest, made fromlaminated beech wood, with natural lacquer finish. Heightadjustment from 400 to 520 mm by safe lift. Spring-loa-ded backrest adjustable in height.
Swivel chair with gliders beech woodSwivel chair with casters beech wood
Ela
boTa
Mas
Bins
21
Bin Cat. No.
C1-6Q ZRC1-6Q ZBC1-6Q ZGC1-6Q ZLC1-6R ZRC1-6R ZBC1-6R ZGC1-6R ZL
BinRobust bins made of polypropylene, temperature and oilresistant. Corrugated bottom and large opening for com-fortable withdrawal. Rear with hook-on device. ESD binsin black color.Bin 1 red W = 105, D = 165, H = 75 mmBin 1 blau W = 105, D = 165, H = 75 mmBin 1 grün W = 105, D = 165, H = 75 mmBin 1 ESD W = 105, D = 165, H = 75 mmBin 2 rot W = 149, D = 192, H = 105 mmBin 2 blau W = 149, D = 192, H = 105 mmBin 2 grün W = 149, D = 192, H = 105 mmBin 2 ESD W = 149, D = 192, H = 105 mm
Bin
C1-6S ZRC1-6S ZBC1-6S ZGC1-6S ZLC1-6T ZRC1-6T ZBC1-6T ZGC1-6T ZL
BinRobust bins made of polypropylene, temperature and oilresistant. Corrugated bottom and large opening for com-fortable withdrawal. Rear with hook-on device. ESD binsin black color.Bin 3 red W = 149, D = 250, H = 130 mmBin 3 blue W = 149, D = 250, H = 130 mmBin 3 green W = 149, D = 250, H = 130 mmBin 3 ESD W = 149, D = 250, H = 130 mmBin 4 red W = 186, D = 300, H = 156 mmBin 4 blue W = 186, D = 300, H = 156 mmBin 4 green W = 186, D = 300, H = 156 mmBin 4 ESD W = 186, D = 300, H = 156 mm
Binaccessories
C1-6U Z1C1-6U Z2C1-6U Z3C1-6U Z4
C1-6V Z1C1-6V Z3
Bin accesoriesEtiquettes and partition walls
Bin 1 Etiquette with foilBin 2 Etiquette with foilBin 3 Etiquette with foilBin 4 Etiquette with foil
Bin 3 Partition wallBin 4 Partition wall
Grab tray
C1-6W ZRC1-6W ZBC1-6W ZGC1-6W ZLC1-6X ZRC1-6X ZBC1-6X ZGC1-6X ZL
Grab trayrobust grab tray made from polystyrene for withdrawal ofbits and pieceses at manual assembly. Rounded cornersand ergonomic grab ledge make it easier to pick up pie-ces. ESD bins in black color.Bin 1 red W = 99, D = 160, H = 70 mmBin 1 blue W = 99, D = 160, H = 70 mmBin 1 green W = 99, D = 160, H = 70 mmBin 1 ESD W = 99, D = 160, H = 70 mmBin 2 red W = 198, D = 160, H = 70 mmBin 2 blue W = 198, D = 160, H = 70 mmBin 2 green W = 198, D = 160, H = 70 mmBin2 ESD W = 198, D = 160, H = 70 mm
Sichtlagerkasten
Schrauben
Ela
boTa
Mas
22
Crossbar, crosswisefor the depth varia-ble mounting ofrunning rails, lightfittings and acces-sories.
Elabo TaMasAdvantage in detail
System channel,vertical, offersample space for theinstallation of ener-gy/compressed airand data lines.
Supporting foot forheight levelling bymeans of sturdy M10screw.Foot plate D = 80mm.
Quick acting clampallows for second'stime variation of tobe frequently chan-ged add-on swivelarms and add-onunits.
Intermediate shelfwith column adap-ter for height andslope variations(30°).
EM X11 work topsupport with a spa-cious height alteringrange of tabletopsfrom 745 to 1100 mm.
System channel,horizontal, with pre-pared, double-sidedassembly possibilityfor attachments anddistributors.
Height adjusting scale optional for the reproducibletransformation of the work-stations to the respectiverequirements.
Patchboard for theindividual arrange-ment of supportand organizing ele-ments. High productivity by fast adaptation to changed
applications!
Exemplary ergonomics by fast and precise tuning in for the individual user!
Perfectly custom-designed solutions with the Elaboplanning and construction service!
Convincingly economic through its attractive price-performance payoff!
The best investment safety through high-quality form of construction and almost unlimited expansion capability!
23
ELABO GmbHRossfelder Strasse 56D-74564 CrailsheimPhone +49/7951/307-0Fax +49/7951/[email protected]
Elabo product lines
TrainingSystems: Education and training
Electronics: Research, development and test
TaMas: Manual and partial manual production and assembly
TaCom: Process monitoring and control
TestSystems: Quality assurance
InForm/EcoTec: Furnishing and equipment
ELABO stands for customer individual solutions.
We develop tailor made, highly flexible systemsfor our customers within the fields of electronicsand electrical engineering. Our range of productsreaches from the planning and equipping of lectu-re rooms and technical workstations for almost allbranches of the industry up to the engineeringand production of complex quality assurance testsystems.
Within the years since the foundation ofELABO 1972 we have learned to bring most vary-ing competences together to the use of our custo-mers: sound know-how in electrical engineering,electronic hardware and software, process mana-gement and logistics experience, the knowledgeand the "seventh sense" of ergonomic qualities, ofwhich are beneficial to the efficiency and the pro-tection of health of the people working on ELABOfacilities, as well as comprehensive knowledge ofthe work place health and safety regulations andthe technical norms. Not at last we have the abili-ties and the complete technical equipment whichis required for the production of customer desi-gned solutions. ELABO is a very modern enterpri-se: a hardware producing knowledge service pro-vider, whose performances is focussed on thespecific requirements of the individual customer.
The success of this enterprise orientationlives on that we understand the pragmatic and thestrategic tasks of our customers and develop ade-quate supports. We want to prove this knowledge.Contact us. We look forward to seeing you.
7620
KD
-TaM
as/T
MD
/03-
12-0
2
