UNION BANK OF INDIA · Central Bazar Road, Ramdaspeth, Nagpur-10 ... REBATE / DISCOUNT IN PERCENTAGES SHALL BE CONSIDERED AS IT IS AN ITEM ... stipulated time, the earnest money paid

PROPOSED INTERIOR FURNISHING WORK OF

UNION BANK OF INDIAFOR VARIOUS BRANCHES AT DIFFERENT LOCATIONS NAMELY

DESAIGANJ BRANCH ATM, WADSA & UMRER BRANCH ATM, UMRER .

TENDER FORM

INTERIOR FURNISHING WORK SOF ATM

TOTAL NO. OF PAGES = 29 Nos.Including 05 No. of Drawings

1

UNION BANK OF INDIA, NAGPURRegional Office, 34/2,Ashirwad commercial Complex,

Central Bazar Road, Ramdaspeth, Nagpur-10

TENDER NOTICE

Sealed item rate tenders are invited from empanelled contractors of Union Bank of India for Proposed Interior furnishing works of ATM, For Various Branches At Different Locations NamelyDesaiganj Branch ATM , Wadsa & Umrer Branch ATM , Umrer. The total work is to be completed within 20 days time.

The blank tender document shall be available at the office of Union Bank of India, Regional Office, 34/2, Ashirwad Commercial Complex, Central Bazar Road, Ramdaspeth, Nagpur-10, on payment of Rs. 500 /- (Rupees Five Hundred only) as cost of tender form by DD/ Pay order. The blank Tender form can also be downloaded from website but while submission of Tender shall be accompanied by Demand Draft/Pay order of Rs. 500 /- (Rupees Five Hundred only) as the cost of Tender form in the name of “Union Bank Of India” payable at Nagpur which is non-refundable. No cheques shall be accepted. The blank tender form shall be available from dated 28-02-2019 to 11-03-2019 during office hours upto 15.00 Hrs on 11-03-2019 and they are to be submitted at the above address on or before 11-03-2019 up to 16.00 Hrs. duly filled in along with a Demand Draft/Pay order drawn on any Nagpur City Branch for Rs. 4,000/- (Rupees Four Thousand Only) in the name of “Union Bank Of India”, towards Earnest money deposit. No cheques shall be accepted.

The tender will be opened on 11-03-2019 at 16.30 Hrs. in the presence of the contractors present at that time. Tenders without Earnest money deposit will not be considered and shall be out-rightly rejected.

Tenders received Late after the date and time of Submission either personally or by post orpostal delay will not be considered and summarily will be treated as rejected. Union Bank Of India reserves the right to accept or reject any or all tenders either in whole or in part, without assigning any reasons.

A set of layout plans, drawings and preliminary details will be issued as part of Tender documents, which are to be returned along with the tender submission.

Time of Completion 20 DaysLiquidated damages for delay Rs. 1000/-_(Rupees One Thousand Only )_ per Day.

The bank will not be bound to accept the lowest tender and reserves the right to accept or reject any or all the tenders without assigning any reasons whatsoever.

Signature of Contractor Deputy General Manager Union Bank Of India, Regional office, Nagpur.

2

SPECIAL CONDITIONS OF THE CONTRACT:-

1. A set of drawings is being issued along with the tender and the set contains preliminary layout plan of the interior works. The entire set is to be returned along with the tender bid with full dated signature of the Tenderer in a separate envelope.

2. The tender is to be properly filled and endorsed and to be quoted in full. Incomplete tender shall be treated as invalid and shall be outrightly rejected.

3. The contractor should quote in figures as well as in words the rate and amount tendered by them. The amount for each item should be worked out and the requisite totals given.

4. THE CONTRACTORS SHALL QUOTE THE EXACT WORKING RATES OF ITEMS & NOREBATE / DISCOUNT IN PERCENTAGES SHALL BE CONSIDERED AS IT IS AN ITEM RATE TENDER WITH THE PRICE BID, THE RATES QUOTED WILL ONLY BE TAKEN INTO ACCOUNT. HOWEVER DURING THE PERIOD OF NEGOTIATION IF ANY AS THE AUTHORITIES MAY DEEM FIT TO SHALL BE CONSIDERED DURING THE PROCESS OF NEGOTIATIONS WHILE ACCEPTANCE OF THE TENDER.

5. The rates to be quoted are on item rate basis and are to be inclusive of everything including all the taxes involved viz octroi, sales tax, works contract tax, excise duty, material cost, labour, etc. complete.

6. Blank Tender forms shall be available upon payment of Rs. 500/- (Rupees Five Hundred only) _as tender fees by DD/ Pay order, which is non-refundable. No cheques shall be accepted.

7. Earnest Money and Security Deposit An amount of Rs. 4,000/- (Rupees Four Thousand Only) shall be paid by Demand draft/Pay order as Earnest Money Deposit at the time of tendering in the name of the bank. No cheques shall be accepted. On acceptance of Tender and offer letter of work, the successful tenderer shall deposit a further amount to make it 2% of approved Tendered amount with the bank as initial security deposit.No interest is liable to be paid by the Bank on the above deposits.

7a. Tender’s acceptance:The Bank reserves the right to accept / reject any or all tenders without assigning any reasons for rejection/acceptance whatsoever. The tenderer whose tender is accepted will have to enter in to an agreement immediately on being informed to do so. In case of failure on the part of tenderer to sign the agreement within the stipulated time, the earnest money paid by him shall stand forfeited to bank and the offer of the tenderer shall be considered as withdrawn by him.

8. The work is to be carried out in Existing premises & the time period provided for completion of work is inclusive of load shedding hours & aforesaid constraints. The contractor should make his own alternative arrangements at his own cost to compensate with load shedding hours & no additional remuneration shall be paid for such arrangements nor any additional time will be granted on this accounts. 9. The tenderer shall be presumed to have carefully examined the drawings, conditions and

specifications of the work and have fully acquainted themselves with all details of the site and with all the necessary information and data pertaining to the work prior to tendering for the work.

Signature of Contractor

3

10. The tenderer may in the forwarding letter mention any points he may wish to make clear but right is reserved to reject the same or the whole of the tenders if the same becomes conditional tender thereby.

11. All pages of document, conditions, specifications, drawings and plans etc. shall be initialed by the tenderer. The tender should bear full signature of the tenderer.

12. The Deputy General Manager or his duly authorized Officer shall open the tenders in the presence ofintending contractors who may be present at the time of opening and will enter the amount of tendersin a comparative statement in a suitable form. In the event of a tender being accepted, the contractor shall thereupon, for the purpose of identification sign copies of specifications and other documents. In the event of a tender being rejected the Bank shall refund the amount of earnest money deposited to the tenderer, on his giving a receipt for the return of money.

13. The drawings, plans, details and the Specifications are only indicative and the schedule of quantities are only tentative. Any changes/additions/deletions/alterations in them shall be accommodated while executing the work without any prejudice. Any extra items or variations upon the schedule items shall be scrutinized by the Architect of the Bank and his decision shall be final and binding in all respects.

14. Specifications of various materials and quality of work shall be the essence of the contract along with the time period and these shall be strictly adhered to.

15. LIQUIDATED DAMAGES @ RUPEES 1000/- (Rupees One Thousand Only)_ PER DAY SHALL BE CHARGED FOR ANY DELAY IN THE COMPLETION OF THE WORK BEYOND THE STIPULATED TIME AND THIS CLAUSE SHALL BE STRICTLY FOLLOWED.

16. Extra items, if any shall be paid on the basis of cost of materials (inclusive of all the Taxes as alreadymentioned) and labour plus 15% towards overheads and profits and items rates already accepted shall form the basis of this Contract.

17. The Bank Authorities at their discretion may delete any part of item or item in full as they mayfeel necessary during the course of execution and no compensation will be paid /claimed in thisregard. The contractor shall not claim any compensation towards such items.

18. The work shall be executed by the Contractor at his own risk and responsibility and the Bank shall not be held liable for any accidents/unforeseen events directly/indirectly and the Contractor understands clearly that no claim for any accidents or loss of life whatsoever shall be entertained by the Bank.


4

Manner of Submission of Tender:

The tenders to be submitted in two separate Sealed Envelopes as below: - Envelope No.1

The first envelope clearly marked, as ‘Envelope No.1’ shall contain the following Documents.

1) Crossed Demand draft of any Scheduled Bank for the said amount as Earnest Money Deposit.No cheques shall be accepted.

2) Performance certificates/ work orders from competent authorities of Union Bank of India for satisfactory completion of works shall be enclosed

3) Valid copy of GST registration Certificate registered under work contract services shall be enclosedwithout which the Tender shall be out-rightly rejected . The name of concern /firm shall be reflected inthe GST registration Certificate without which the Tender shall not be considered & shall be out-rightly rejected .

Envelope No.2

The second envelope clearly marked, as ‘Envelope No.2’ shall contain only the completed Tender document/ price bid along with the drawings and details issued with the blank tender forms duly signed by the Contractor should be enclosed.

If the Bank is satisfied with papers enclosed in the first envelope then only the Envelope No. 2 shall be Opened.

Note: - The tenders are to be submitted in two separate sealed envelopes as mentioned above, however if the two separate sealed envelopes are put in one common sealed cover, the contractor shall mention over the common sealed cover that envelope no. 1 & envelope no.2 are inside the common sealed cover. While opening if it is found that the two separate sealed envelopes are not inside the common sealed cover the tender shall be outrightly rejected.


5

GENERAL & SPECIAL CONDITIONS OF THE CONTRACT & SPECIFICATIONS FOR WORKMANSHIP AND MATERIALS FOR PROPOSED INTERIOR FURNISHING WORKS OF ATM FOR VARIOUS BRANCHES AT DIFFERENT LOCATIONS NAMELY DESAIGANJ BRANCH ATM, WADSA & UMRER BRANCH ATM, UMRER .

GENERAL CONDITIONS: -1. The work defined in the schedule is for Interior furnishing work for Union Bank of India,

Proposed Interior furnishing works of ATM For Various Branches At Different Locations Namely Desaiganj Branch ATM, Wadsa & Umrer Branch ATM, Umrer.

2. Every page of Tender Document shall be Signed by the Contractor with full dated Signature and Seal.

3. Contractor has to quote his rate both in figures and words.

4. The entire work is to be finished within 20 days. It is expected that the contractor shall carry out the work at site.

5. The Defect Liability Period of the work shall be Six months from the Date of Virtual Completion Certificate issued by the Architect of the Bank.

6. Only one interim payment shall be paid to the contractor till the completion of contract. The minimum amount of the interim bill shall be 50% of the Tendered Amount. From the interim bill an amount of 10% of tendered amount will be deducted towards retention amount inclusive of initial Security deposit & Earnest money deposit. The final bills shall be scrutinized within 15 days from the Date of completion, and the period of honoring the same shall be One month. Half of the retention amount i.e. 5% of the work shall be paid with the final Bill. The final 5% retention amount of the work will be kept as Security deposit and will be released only after Six months from the date of virtual completion of work as certified by the Bank’s Architect. The retention amount shall carry no interest whatsoever.

7. The contractor/s shall not be paid any advance payments.

8. While working at the site, contractor shall make his own arrangements for the storage of materials from the point of damage and security. Similarly he shall be responsible for the preservation and maintenance of the premises.

9. Before commencing the work, the contractor shall mark the layout to full size and get same approved from Architect.

10. The tender shall remain valid for 90 days.

11. Income Tax / TDS and GST & any other taxes to be deducted at source shall be deducted from the Bill of Contractor as per the Standard norms of Government.

12. Payment of Electricity charges at the Site for execution of work shall be payable by Contractor only.


6

GENERAL SPECIFICATIONS FOR WORKMANSHIP AND MATERIALS: -

The Contractor agrees to execute the work as below: -

1. The workmanship has to be of the best quality to the satisfaction of the Bank. The entire premises shall bethoroughly cleaned before the job is handed over.

2. The exposed edges of the plywood shall be properly covered with laminate or lipping and no edges shall be left unlipped.

3. All the joinery shall be neat and joinery of plywood shall be “dove-tailed” type and always fixed with proper screws and adhesives ( Fevicol/ Falcofix or Equivalent) and no nails shall be used for joinery.

4. For all the woodwork the wood surfaces shall be made absolutely “smooth and even” by plaining thoroughly & baitha.

5. Pressing of laminates shall be in a workman like manner ensuring no air pockets with clean edges.

6. All the details on the woodwork like grooves and moulding etc shall be neat and clean and in proper line and level.

7. For all polishing work the surfaces shall be prepared absolutely smooth and the finishing done in a workman like manner.

8. Plywood used shall be of MR Grade of specified make, ISI marked and shall be got approved before use. (Rama ply Trend /Green /Kitply /Archidply/ Century/ or equivalent as approved by Bank/ Bank's Architect)

9. All hardwood exposed shall be of good quality and shall be got approved before use. The basic rate of Hard wood Rs.1200/cu.ft. inclusive of all Taxes.

10. All teakwood exposed shall be of good quality “C.P.” TEAK WOOD and shall be got approved before use. The basic rate of C.P. teakwood Rs.3500/cu.ft. inclusive of all Taxes.

11. Laminates shall be of standard quality (1.0 mm thick) (Merinolam/ Century/Greenlam/Sumica/ Formica Kitlam or equivalent.) as approved by the Bank.

12. All glasses shall be of 5, 10 & 12mm thick. All clear glasses shall be of Modi float / Asahi float /St.Globain float glass only. All exposed edges of glass shall be Machine polished, bevelled & smooth as per the quality requirements of the Bank.


7

13. All fittings and fixtures shall be of best quality, heavy type brass oxidized or chromium plated as per Bank requirements and specifications. All storage locks, tower bolts, hinges, ball catches, telescopic sliding channels (Earl-Behari make) and handles as per approval of the Bank.

14. Door fittings shall include handles, heavy duty brass hinges, with night latch (wherever mentioned) / Aldrop / mortise locks directed (in brass chrome or oxidized,) door stopper and shall be supplied and fixed by the contractor. All above hardware shall be approved by the Bank before use.

15. All exposed T.W. members shall be finished with wood polish.

16. All Drawer sliders / Keyboard sliders shall be telescopic channels / sliders only.

17. Aluminum composite panel of standard make Aludecor make / Altobond or equivalent as approved by Bank / Bank's Architect.


8

APPROVED MAKE OF MATERIALS

SR.NO.

ITEM / MATERIAL MAKE

1. Particle Board -----

2. Antitermite / Fire retardant Paint -----

3. False Ceiling -----

4. Oil Bound Distemper / Acrylic Emulsion

Asian, Dulux, Berger

5. Laminate (Merinolam/ Century/Greenlam/Sumica/ Formica Kitlam or equivalent.)

6. Teak Wood C.P. Teakwood

7. Foam -----

8. Hardware -----

9. Tile -----

10. Leatherite -----

11. Glass Modi float / Asahi / St. Gobain

12. Ply (Rama ply Trend /Green /Kitply /Archidply/ Century/ orequivalent as approved by Bank/ Bank's Architect)

13. Vinyle Film -----

14. Board -----

15. Carpet -----

16. Cement Paint -----

17. Cement -----

18. GI Pipe -----

19. Paint Dulux / Berger / Asian Synthetic Enamel Paint First Quality

20. CP Fitting -----

21. Ceramic Fitting -----

22. Kitchen Sink -----

23. Vitrified Tiles -----

24. Aluminium Section -----

25. Flush Door Shutter -----

26. Glue -----

27. Gipboard False Ceiling -----

28. Venetian Blinds -----

29. Door Closer Dorma/ Godrej make

30. Floor Spring Ozone/ Dorma/ Godrej make

9

31. Melamine Polish -----

32. Wax polish -----

33. U – Foam -----

34. Fabric -----

35. Locks -----

36. Metallic Laminate -----

The material shall be first got approved from the Bank’s Architect / Bank’s Competent Authorities.


10

11

IMPORTANT:

THE CONTRACTORS SHALL QUOTE THE EXACT WORKING RATES OF ITEMS & NO REBATE /DISCOUNT IN PERCENTAGES SHALL BE CONSIDERED AS IT IS AN ITEM RATE TENDER WITH THE PRICE BID, THE RATES QUOTED WILL ONLY BE TAKEN INTO ACCOUNT. HOWEVER DURING THE PERIOD OF NEGOTIATION IF ANY AS THE AUTHORITIES MAY DEEM FIT TO SHALL BE CONSIDERED DURING THE PROCESS OF NEGOTIATIONS WHILE ACCEPTANCE OF THE TENDER.

1

TENDER OF INTERIOR FURNISHING WORKS TO BE EXECUTED FOR ATMUNION BANK OF INDIA, FOR VARIOUS BRANCHES AT DIFFERENT LOCATIONS NAMELY DESAIGANJ BRANCH ATM, WADSA & UMRER BRANCH ATM, UMRER.

TOTAL OF DESAIGANJ BRANCH WADSA Rs._________________________________“INTERIOR WORKS – (I)”

TOTAL OF UMRER BRANCH UMRER Rs._________________________________“INTERIOR WORKS – (II)”

TOTAL (I + II) = ____________________________________________________

ADD CGST @ 9.00% Rs. ___________________________________

ADD SGST @ 9.00% Rs. ___________________________________

GRAND TOTAL Rs. ____________________________

RUPEES _____________________________________________________

Signature of the Contractor Deputy General ManagerUnion Bank of India

Regional Office, Nagpur

2

TENDER

Interior Furnishing work – ATMNAME OF WORK : TENDER OF INTERIOR FURNISHING WORKS TO BE EXECUTED FORATM, UNION BANK OF INDIA, DESAIGANJ BRANCH, WADSA.

NAME OF CONTRACTOR ___________________________________________________________

Item Description Quantity Rate Per AmountNo. Rs. Ps. Rs. Ps.1 SYNTHETIC ENAMEL PAINT

Providing & applying synthetic enamel paint ofapproved shade, make & colour (Asian/Dulux/Bergerpaints) to existing M.S. Windows & other M.S. 10.00 SqmtWorks Rolling shutter etc. or at required places as directed by Architect including scaffolding,finishing etc. complete

2 ALUMINIUM COMPOSITE PANELLING insideProviding & fixing in required position 3mm thk. Exteriorgrade aluminium composite panel in ceiling & vertical cladding or as per requirement and directed by the Architect in Composite panel of Metallic Exterior 20.00 Sqmtgrade of Lennox/ Alto bond/equivalent make, over a framework made out of 50x50x2mm, aluminium SHS anchored to existing M.S. Structure includinginstalling the composite panel in a grid pattern of size2'-0” x2'-0” (approx) or of required size as directed with the help of alumiuim cleats / angle of size 1”x1” and striking out the joints with weather silicon of dow corning 789/wacker make and as directed by the bank'sArchitect. The rate shall include cutting of panels, its bending cutting for providing down-lighters etc. labour,scaffolding etc. complete.The white Aluminium Composite Panelling shall be provided to the interior wall/Partition/Storage Rack and External surfaces in exteriors band in Red & blue colour at lintel level or of required thickness & as directed.

3 ENTRANCE DOORSProviding & Fixing Full height partly glazed and Partly panelled partition with Door at required positions Of required height(2.15Mts Approx.) or as required, asper drawing, design and as directed by the made out of(Glazed portion at required places) framework ofstandard Aluminium rectangular section(50 X 25mm X 1mmThickness) of size 600 X600 mm c/c covered with 6 mm thickply of MR Grade of ISI Mark confirming to IS-303

C/F

3

TENDER



Item Description Quantity Rate Per AmountNo. Rs. Ps. Rs. Ps.

B/F(Narottam//Amul/Kitply/Green/ Mayur//Rama Ply TREND/Archidply) on both sides & finished with 1.00mm thk Laminate(Vir/Sundek/Merinolam/Botanica/ Kitlam /Century/Amulya/Archidlam/Asis or equivalent) of approved shade and design on both side of partition. The door shall be made out of framework of standard Aluminium rectangular section (50 X 25mm X 1mmThickness) of Required size, covered with 6mm thick ply of MR gradeof ISI mark confirming to IS-303 (Narottam/ Ecotech/Amul/Mayur/Rama Ply TREND/Green/Kitply 5.00 Sqmt.Archidply) on both sides & finished with 1.00mm

Kitlam/Merinolam/Century/Amulya/Botanica/Archidlam/Asis or equivalent)as directed by Architect. The top rail , And Styles shall have 150 mm Thickness and Bottom rail shall have 350mm thickness (height) while other part shall be fully glazed with 10 mm thick glass or as directed As per site conditions with necessary etching & with T.W. Beading of size 25x12mm.The shutter shall be fixed on floor spring of Ozone/Dorma/Godrej

godrej make lock /mortise lock /Aldrops as per requirement, Brass Tower Bolt 150mm long, BrassHandle 300 mm, Door Stopper with Erection, finishingetc. complete and as directed by Architect.The glazed portion shall be 10 mm thick clear floatglass with itching as per design & drawing & asdirected. fixed with T.W.

4 FLOOR SPRING:Providing and fixing floor spring to doors of 1.00 No.Dorma/Godrej/Ozone (heavy) make of I.S.I mark.

C/F

thick Metallic Silver laminate (Vir Sundek/

Make (I.S.I mark, Heavy duty, Item taken Separately). The shutters shall have concealed

4

TENDER




B/F5 ALUMINIUM COMPOSITE PANELLING at Entrance

Providing & fixing in required position 3mm thk. exterior grade aluminium composite panel in ceiling & vertical cladding or as per requirement and directed by the Architect in Composite panel 5.00 Sqmtof Metallic Exterior grade of Lennox/ Alto bond/equivalentmake, over a frame work made out of 50x50x2mm, aluminium SHS anchored to existing M.S. Structureincluding installing the composite panel in a gridpattern of size 2'-0” x2'-0” (approx) or of requiredsize as directed with the help of alumiuim cleats/angle of size 1”x1” and striking out the joints with weather silicon of dow corning 789/wacker make and as directed by the bank's Architect. The rate shall include cutting of panels, its bending cutting for providing down-lighters etc. labour, scaffolding etc. complete.

TotalSay Rs.

NOTEThe contractor has to quote the rates after assessing the site conditions, scope of work to be carried out & disposing off the removed material / dismantling existingFalse Ceiling, Light fixture etc. outside the Branch / Bank premisesat least 1.00 Kms. away from the premises includingall leads, lifts, labour transportation etc. complete & no extra payment shall be made on this account.

Signature of the Contractor Deputy General ManagerUnion Bank Of IndiaRegional Office, Nagpur

1

TENDER

Interior Furnishing work – ATMNAME OF WORK : TENDER OF INTERIOR FURNISHING WORKS TO BE EXECUTED FORATM, UNION BANK OF INDIA, UMRER BRANCH, UMRER.


Item Description Quantity Rate Per AmountNo. Rs. Ps. Rs. Ps.1 FALSE CEILING-

Providing and fixing in position all levels,M/F suspended ceiling horizontal and vertical faces [Regular Single layer; Code: Gs- MFSc-4] manufactured by IndiaGypsum as per manufacturer specifications and following details :-a) G.I. Perimeter channels will be of size20 mm [one flange] x 27mm [web] x 0.55 mm [thick] will be screw fixed to wall / partition with the help of nylon sleeves and 11.00 SqmtScrews @ 610 mm c/c .b) Suspending G.I. Intermediate channelsof size 15mm [flanges] x 45 mm [Web]x 0.90mm [thick] from soffit @ 1220mm c/cwith ceiling angle of size 25mm x10mm x0.55 mm [thick] fixed to soffit with G.I. Cleat and steel expansion fasteners. c) Suspender as per manufacturerspecifications to be provided as directed.d) Fixing ceiling section of size 51.5 mm[knurled web]x 26 mm [web] x10mm [lips]x 0.55mm [thick] perpendicular to theintermediate channel with the help ofconnecting clip @ 457mmc/c.e) Fixing 12.5 mm thick tapered edge plain Gyp board by mechanically screwing to the ceiling section with 25 mm drywallScrew @ 230mm c/c.f) Joining and finishing the boards for aflush look including filling and finishingthe tapered and square edges of the boardwith jointing compound, joint paper tape and two coats of drywall top coat suitable for Gypboard.g) Making frame for all light fittings, grills, diffusers, cutouts and Trap door if any etc.with perimeter channel and supporting suitably overfalse ceiling framework without any extra cost.h) Angle beads, control joints, etc. are toused without any extra cost wherever

C/F

2

TENDER




B/Frequired at site and directed by architect.

POP moulding of size 75 mm to 150 mm deep at the junction of the Gypboard ceiling and wall/ column / beam etc. withnecessary filling on the backside including finishing as per drawing & as directedby the Architect.j) Applying Acrylic Emulsion (Dulux ICIpaints) of approved mare, shade and colour of 3 or more coats to the satisfaction of the architect.required at site and directed by architect.

2 SYNTHETIC ENAMEL PAINTProviding & applying synthetic enamel paint ofapproved shade, make & colour (Asian/Dulux/Bergerpaints) to existing M.S. Windows & other M.S. 20.00 SqmtWorks Rolling shutter etc. or at required places as directed by Architect including scaffolding,finishing etc. complete

3 ALUMINIUM COMPOSITE PANELLING insideProviding & fixing in required position 3mm thk. Exteriorgrade aluminium composite panel in ceiling & vertical cladding or as per requirement and directed by the Architect in Composite panel of Metallic Exterior 32.00 Sqmtgrade of Lennox/ Alto bond/equivalent make, over a framework made out of 50x50x2mm, aluminium SHS anchored to existing M.S. Structure includinginstalling the composite panel in a grid pattern of size2'-0” x2'-0” (approx) or of required size as directed with the help of alumiuim cleats / angle of size 1”x1” and striking out the joints with weather silicon of dow corning 789/wacker make and as directed by the bank'sArchitect. The rate shall include cutting of panels, its bending cutting for providing down-lighters etc. labour,scaffolding etc. complete.The white Aluminium Composite Panelling shall be provided to the interior wall/Partition/Storage Rack and External surfaces in exteriors band in Red & blue colour at lintel level or of required thickness & as directed.

C/F

i) Providing and fixing hand cast 1st grade

3

TENDER




B/F4 FULLY GLAZED ENTRANCE DOOR WITH FIXED

PARTITION(Incuding toughned glass partition between machines)Providing & fixing fully glazed Partition with Glazed doorat the entrance facade as per design, drawingand as directed by architect made out of 12 mm thick Toughened safety glass (modi/Asahi/St.Gobain )railing with diamond edge polish for exposed edges& 2.5" round cut in the glass as per designGlasses should be fixed in S.S. finished D-brackets etc.with metal patch fittings at Top/Bottom /Corner (Dorma /polo Make or equivalent as approved by Bank authorities for door shutter and partitionFor Glass partition : 8.00 Sqmt.Glass panels can be Bolted together with stainless steel Stub post which are into concrete through coredrill holes or supported by stainless steel clamp fixing to vertical posts on each sides as per requirement andas directed by Architect, with necessary bevellingetc. complete fixed on floor spring of Ozone/Dorma/Godrej

300 mm on both sides of approved make, Al. DoorStopper etc. with erection, fixing, finishing etc. completeand as directed by Architect. The entire glass partition is to be finished with one way film or as per banks requirement or as directed by architect .

5 DUST BIN:Providing Dust Bin Boxes as per Standardsin Machine Pressed M.S. Sheet finished Powdercoated in required Shade and colour of Standard Designs of required Height and Measurement ----- ----- ----- -----and as per drawing & Standard specifications .The Gauge of Sheet shall be 18 Gauge M.S. C.R.Sheets including 3 Nos. Lock etc etc complete.

C/F

Make (I.S.I mark, Heavy duty, Item taken Separately). The shutters shall have Aluminium Handle

4

TENDER




B/F6 R.C.C RAMP

Providing R.C.C. Ramps inRCC 1:2:4, work of required width (min. 0.90 mts or as required )and height or as per Site Condition in 1: 5 or 1:6 ratio including ----- ----- ----- -----reinforcement, of 10mm Ø 150c/c bothways, shuttering, framework,laying concrete. etc. complete.

7 GRANITE FLOORING Removing existing vitrified flooring and providinggranite patta over removed floor portion 1.00 Sqmt.of approved color and make or as required or as Directed by architect in 1:4 cement mortar including fixing, finishing etc.

8top and vertical pipe of 50mm dia at 0.90 m c/cor as required and horizontal pipes of 25mm diain two rows, all pipes of 2 mm thick includingbuffing,fabricating fixtures and fastening includingpipe base of appropriate diameter and ball baseof 75 mm dia. above one major post etc.complete ----- ----- ----- -----(Prior approval of sample and brand byArchitect is necessary before use)

9 FLOOR SPRING:Providing and fixing floor spring to doors of 1.00 No.Dorma/Godrej/Ozone (heavy) make of I.S.I mark.

10 Providing & fixing acrylic sandwich board of size 0.46x0.62fixed on studs etc. complete including studs, acrylic ----- ----- ----- -----Sheets 3 mm thk. 2 nos. etc. complete.

11 Providing & fixing acrylic logo of Bank @ suitable place as directed by Bank/ Architect, with necessary fixture 1.00 Nos.etc. complete.

C/F

Providing & Fixing stainless steel railing with

5

TENDER




B/F12 ALUMINIUM COMPOSITE PANELLING at Entrance

Providing & fixing in required position 3mm thk. exterior grade aluminium composite panel in ceiling & vertical cladding or as per requirement and directed by the Architect in Composite panel 11.00 Sqmtof Metallic Exterior grade of Lennox/ Alto bond/equivalentmake, over a frame work made out of 50x50x2mm, aluminium SHS anchored to existing M.S. Structureincluding installing the composite panel in a gridpattern of size 2'-0” x2'-0” (approx) or of requiredsize as directed with the help of alumiuim cleats/angle of size 1”x1” and striking out the joints with weather silicon of dow corning 789/wacker make and as directed by the bank's Architect. The rate shall include cutting of panels, its bending cutting for providing down-lighters etc. labour, scaffolding etc. complete.

13 WRITING TOP with STORAGE RACK (Low Height ) Providing & fixing Writing top for Customers ofrequired size 0.75 mts length approx. as per design &drawing made out of aluminum framework of requiredsize with 18 mm thk ply of MR grade of ISI markconfirming to IS-303 (Narottam/ Ecotech/Amul/Rama Ply TREND/Prince/Kitply/Archidply/ ----- ----- ----- -----Samratply/Silviply/Sevakply) & finished with1.0 mm thk laminate (Vir /Sundek /Merinolam/Century/Amulya/Botanica/Kitlam/Archidlam/Samratlam/Silvilam or equivalent) and 10 mmthick Glass to be fixed into the frame forkeeping voucher etc. as per drawing and as directed by the Architect.

C/F

6

TENDER




B/F14 Full Height Fully Paneled Partition with M.S. Grill

Providing and fixing ATM room /E-lobby partition/ wall made out of M.S. Grill Sandwitched and encased in between 12 mm thick ply from both sides confirming to IS-303 (Narottam/Ecotech/Mayur/Archidply/ ----- ----- ----- -----Amul/Rama ply TREND/Green/Kitply) and finished With one side in 1.00 mm thk laminate (Vir/Sundek/Kitlam/Merinolam/Century/Amulya/Botanica/Archidlam/Asis or equivalent)and one side with 3 mm thk. exterior gradealuminium composite panel for wall of ATM room/ E-lobbyM.S. Grill shall have 40X40X5 mm M.S. Angle outer frame work with 10 mm square bar bothways overlapping each other at 100 mm C/C approx.and 12 mm ply fixed from both sides up to requredHeight of ATM room including fixing, finishing,Welding Tucking of Joints , riveting etc. complete.

The white Aluminium Composite Panelling shall be provided to the interior wall/Partition/Storage Rack exactly opposite the entrance and Externalsurfaces in exteriors band in Red & blue colourat lintel level of required thickness as directed.

15 CABIN DOOR/DOORS Condition in 1: 5 or 1:6 ratio including panelled /Fully panelled T.W. Door to Cash cabin and nearStrong room ,Record Room, near UPS And lobby area or at required places /positions made out of C.P.Teak woodframework of 75x35mm @ 375 mm c/c bothways with 6mm thick ply of MR grade of ISI ----- ----- ----- -----mark confirming to IS-303 (Narottam/ Ecotech/Amul/Rama Ply TREND/Green/Kitply/Archidply/or equivalent ) on both sides & finished with 1.00mm thick laminate (Vir Sundek/Kitlam/Merinolam/Century/Amulya/Botanica/Archidlam or equivalent)as directed by Architect. The Upper portion of the shutter shall have 5mm thick glass panel above 900 mm or as directed from

C/F

7

TENDER




B/Ffloor level with necessary etching & with T.W. Beading of size 25x12mm.The shutter have C.P. Finished Brass Hinges, Night latch of Godrej/hettich/ozone make /mortise lock /Aldrops as per requirement, C.P. Finished Brass Tower Bolt 150mm long, Brass Handle 100 mm, Door Stopper with Erection, finishing etc. complete and as directed by Architect.

16 VITRIFIED FLOORING Providing & fixing 8-10 mm thick mirror polishedvitrified Asian/Spartek /Navin/Bell/Nitco/ Somany flooring and skirting. The size of tile shall be 500x500mm/600x600mm fixed over existing flooring with 3 mm

11.00 Sqmt.or equivalent) of approved shade in multi- colourincluding fixing, polishing, cleaning, and finishing etc.complete. (Basic rate of mirror polished vitrifiedtiles is Rs. 650/- per Sqmt.)

17A Removing Existing vitrified/ Ceramic Tile Flooring The work includes removing existing vitrified tile /ceramic tile flooring in ground floor ATM and proposed 11.00 SqmtE-Lobby and disposing the debris outside the premises to the safe place as directed with all leads,lifts etc. complete.

17B Vitrified Flooring (Labour Only)The item includes Labour work for raising level of

plinth to match the existing level of ATM, laying and ----- ----- ----- -----fixing of Vitrified tiles, cleaning & finishing etc. complete.

18of approved shade make & colour (Asian/Dulux/Berger paints) to old /new surfaces in ----- ----- ----- -----hall area as directed inclusive of two coats of putty including rubbing the surface &making in smooth to receive the paint including scaffolding,finishing etc. complete

C/F

thick layer of ready made tile adhesive (Fevimet/Terrafix

Providing and applying Acrylic emulsion Paint

8

TENDER




B/F19 Demolishing Work

The work includes dismantling & removing the Existing wall in between Existing ATMAbout 2.15 mts height 0.23 / 0.115 mt. Thkand spreading & compacting the material at requiredplace to raise the plinth level and disposing theexcess material outside the premises as directed 13.00 Sqmtwith all leads, lifts etc. complete. The rate shall beinclusive of Erection of brickwork whenever necessary Including plastering the surface wherever required afterdemolition or erection of brickwork and make itin proper line and length & level, cleaning andfinishing etc. complete. The work include labour forspreading, compaction, etc complete.

20 P.C.C. BEDProviding and laying in situ, cement concrete in 1:4:8of trap/ granite/quartzite/gneiss metal for bedding including bailing out water, plywood/steel formwork, compacting, finishing uneven and honeycombed surface curing etc. complete. The 5.00 Cumt.Cement Mortar 1:3 plaster is considered for renderinguneven and honeycombed surface only etc. complete

21 Providing M.S stand for batteriesProviding and supplying M.S. Stand for UPS Batteriesmade out of 40x40x5 mm angle for outer frame work ----- ----- ----- -----& 25x25x5 mm for 2 nos. for intermediate supports asper drawing deign & as directed and in two tiers i.e.One @ 4”(0.10) above floor level and another @ 30”(0.75)above floor level with intermediate cross supports in 25x25x5 mm thk. @ both levels inclusive of primer painting etc. complete.STAND of required size & as directed by Architect.

C/F

9

TENDER




B/F22 ULTRA TILE FLOORING IN FRONT

OF ENTRANCE Providing & fixing Ultra Tile or equivalent off required size & as directed, to the steps in-front of entrance of approved make and as directed by the Bank's Architect. 4.00 SqmtThe work includes providing and fixing Ultra Tile to the Tread, Riser and porch floor as per drawing and asdirected by architect, as per required size, shade,colour approved by architect including fixing, cleaning,and finishing etc. complete.

TotalSay Rs.

NOTEThe contractor has to quote the rates after assessing the site conditions, scope of work to be carried out & disposing off the removed material / dismantling existingFalse Ceiling, Light fixture etc. outside the Branch / Bank premisesat least 1.00 Kms. away from the premises includingall leads, lifts, labour transportation etc. complete & no extra payment shall be made on this account.

Signature of the Contractor Deputy General ManagerUnion Bank Of IndiaRegional Office, Nagpur