Unirac Solarmount

7/28/2019 Unirac Solarmount

1/32

NEW

InteractIveMaster Price listMarch 25th 2011

SOLARMOUNT-IRAPIDRAC G10SOLARMOUNT SUNFRAME UNIRAC LARGEARRAY (U-LA)

ACECLAMP jr

Seamed Metal Roof Mounting Solution

s pag 18 & 29fo da

+ SolarMount-I

RevolutionryClmpingSolution

MeetsRevolutionryMountingSolution

Click To Play Movie

PV Mounting Solution

Ao:

NewUnirc Flt Flshings pag 28 fo da

A HILTI GROUP COMPANY


2/32

Page

2 Prices and specifications are subject to change without notice.

Master Price ListR

Introductionthank you fo hoong Una PV mounng ouon. s

h onfguaon hk b ud fo you naaon, u

h zng ha o dmn you pa numb and fnd youp ung ou p .

Price and specifications are subject to change without notice.

However, Unirac strives to maintain open communications with you,

our most valued partner. In most cases, newletters are sent out by

e-mail 30 days in advance of any part number or pricing changes.

Plese me sure your server nd/or e-mil softwre is set up to

receive e-mils from ny ddress t unirc.com.

Unirac welcomes input concerning the accuracy and user-friendliness

of this publication.

Please send any suggestions to [email protected].


3/32

Page

3

Master Price List

Prices and specifications are subject to change without notice.

R

Table of ContentssOlArMOUNt

Components and Configurations 4-5

Rail Price Lists 6-9

Accessories 10-11

Tilt Leg 12-13

Top and Bottom Mounting 14-17sOlArMOUNt-i

Component Price Lists 18-19

sUNFrAMe

Rail Price Lists 20

Accessories 21-22

rAPiDrAc G10

Price Lists 23

Components and Configurations 23

RapidFoot Attachment Option 24

UNirAc lArGe ArrAY (U-lA)

Price Lists 25

AttAcHMeNtsStandoffs 26-27

Flashings 27-28

L-Foot 29

FastFoot 29

ACECLAMP JR 30Roof Tile Hook 31

Wire Management Clips 31


4/32


Master Price List SolarMount

Page

4

R

Where foot spacing must exceed 48 inches, standard rail providesthe extra strength. Install an array flush to a roof or other mountingsurface in high profile (rails parallel to rafters) or low. Accessorieshandle special circumstances, such as Spanish tile or an uneven roof.

Minimize the vertical height of your arrayto hide an array behinda parapet, for example. You can also optimize tilt angle on a pitchedroof to maximize system performance. Tilt angle depends on leglength and the make and model of your PV modules. Use standardrail with all tilt legs.

Maximize module density at a given site area on the ground or on aflat or pitched roof. Tilt angle depends on leg length and rail length.

Use standard rail with all tilt legs.

High profile legs require unspliced rails not exceeding 180 inches.

FLUSH MOUNT

LOW PROFILE TILT LEGS

HIGH PROFILE TILT LEGS

soaMoun sandad raAttached with a Splice Bar

sOLarMOUntStndrd Ril Componentsnd ConfigurtionsThanks for using SolarMount. Select the configuration

checklist best suited for your installation.


5/32

SolarMount Master Price List


Page

5

R

FlUsH MOUNt, cliPs: cHecklist

Kit pricing: Standard rail kits; clips Pro-Pak pricing: Standard rails; L-feet; clips Rail splices, grounding clips and grounding lugs Standoffs and flashings Accessories: Cable ties, shims, and security hardware

See Cautions 1 and 2 above. Consult Unirac before using hangerbolts in this configuration.

FLUSH, CLaMPS: CHECkLIST

Pro-Pak pricing: Standard rails; L-feet; clamps

Rail splices, grounding clips, and grounding lugs

Standoffs and flashings

Accessories: hanger bolts, cable ties, shims, security hardware

BOTTOM MOUNTING CLIPS

Select bottom mounting clips if you planto attach modules to rails prior to final installation, a sequence wellsuited for pre-wired rows of modules. No space between modules isrequired, and rails need not extend past the end modules.

Cautions: (1) Module mounting holes determine spacing of the rails.

If rails are parallel to rafters, stringers will likely be necessary underthe roof since footings must attach to structural members, not deckingalone. (2) Flush arrays are significantly more difficult to install whenusing bottom mounting clips because of access problems whensecuring footings. Use bottom mounting clips with flush mounts onlyif the PV modules you are installing have mounting holes near theends.

TOP MOUNTING CLaMPS

Select top mounting clamps if you prefer to install modules aftersecuring the footings and the rails. This sequence is especially wellsuited for flush mounting.

Top mounting clamps do not use module mounting holes, thusallowing flexibility in rail placement. See the installation manual for

details. Top mounting requires 1 inch between modules. Rails mustextend 1 inches beyond the last module on each end.

Mid clamp End clampBottom

mountingclip

HIGH PROFILE TILT LEGS, CLIPS: CHECkLIST

Same as "Standard Rail, Flush, Clamps", plus:

Sizing: Tilt angles

Pricing: High profile tilt legs

Do not use rail splices with this configuration. Consult Unirac before using

hanger bolts.

HIGH PROFILE TILT LEGS, CLaMPS: CHECkLIST

Same as "Standard Rail, Flush, Clamps", plus:

Sizing: Tilt angles .

Pricing: High profile tilt legs

Do not use splices with this configuration. Consult Unirac before using

hanger bolts.

LOW PROFILETILT LEGS, CLIPS: CHECkLIST

Same as "Standard Rail, Flush, Clips", plus:

Sizing: Tilt angles and L-feet required

Pricing: Low profile tilt leg

Requires mounting holes at ends of modules. Consult Unirac before using

hanger bolts in this configuration.

LOW PROFILE TILT LEGS, CLaMPS: CHECkLIST

Sme s "Stndrd Ril, Flush, Clmps", plus:

Sizing: Tilt angles and L-feet required

Pricing: Low profile tilt legs

Consult Unirac before using hanger bolts in this configuration.


6/32



Page

6

R

im no. Dpon Nomna hppng wgh l p

ca anodzd300004 1 ea. 72 in. 5 lbs. 48.00

300005 1 ea. 84 in. 6 lbs. 56.00300006 1 ea. 96 in. 7 lbs. 61.00

300007 1 ea. 106 in. 8 lbs. 68.00300008 1 ea. 120 in. 9 lbs. 77.00300009 1 ea. 132 in. 10 lbs. 82.00300010 1 ea. 144 in. 10 lbs. 89.00300011 1 ea. 156 in. 11 lbs. 97.00

300012 1 ea. 168 in. 12 lbs. 104.00300013 1 ea. 180 in. 12 lbs. 111.00

300014 1 ea. 192 in. 13 lbs. 119.00300015 1 ea. 204 in. 14 lbs. 127.00300016 1 ea. 216 in. 15 lbs. 134.00

300017 1 ea. 228 in. 15 lbs. 141.00300018 1 ea. 240 in. 16 lbs. 149.00

SolrMount stndrd rilsClear Anodized aluminum


ca anodzd300024 1 ea. 96in. 7 lbs. $ 52.00300025 1 ea. 106 in. 8 lbs. 59.00

300026 1 ea. 120 in. 9 lbs. 66.00300027 1 ea. 132 in. 10 lbs. 72.00300028 1 ea. 144 in. 10 lbs. 78.00

300029 1 ea. 156 in. 11 lbs. 85.00300030 1 ea. 168 in. 12 lbs. 92.00300031 1 ea. 180 in. 12 lbs. 99.00300032 1 ea. 192 in. 13 lbs. 105.00300033 1 ea. 204 in. 14 lbs. 112.00

300034 1 ea. 216 in. 15 lbs. 118.00300036 1 ea. 240 in. 16 lbs. 132.00

M Fnh300045 1 ea. 192 in. 13 lbs. 90.00300049 1 ea. 240 in. 16 lbs. 112.00

SolrMount stndrd rilsMill Ship aluminum (Clear anodized and Mill Finish)Rail order must meet minimum of 2000 lbs to be shipped directly from mill.

Ril Price List


7/32



Page

7

R

Pro-P RilsUse Pro-Pak component pricing when regularly usingSolarMount on multiple installations.

ra ngh Nomna hp Nomna hpim no. (nh) z (nh) wgh (b) l p

300101 48 51 x 5 x 3 30 $ 271.00300103 72 75 x 5 x 3 44 364.00300104 84 87 x 5 x 3 50 412.00300105 96 99 x 5 x 3 55 459.00

300106 106 109 x 5 x 3 61 506.00300107 120 123 x 5 x 3 67 559.00300108 132 135 x 5 x 3 72 612.00300109 144 147 x 5 x 3 78 664.00

300110 156 159 x 5 x 3 92 717.00

300111 168 171 x 5 x 3 100 770.00300112 180 183 x 5 x 3 108 824.00300113 192 195 x 5 x 3 114 877.00300114 204 207 x 5 x 3 120 930.00300115 216 219 x 5 x 3 128 983.00

300116 228 229 x 5 x 3 135 1,023.00300117 240 243 x 5 x 3 143 1,077.00

SolrMount stndrd rils: Bundles of 8 rils

PRO-Pak: Standard rail bundles consist of 8 rails. Bundles listed here do not include L-feetor hardware. See the SolarMount sizing chart to determine rail length appropriate to yourinstallation. If desired rail length exceeds 240 inches, order a splice and two segments.Spliced segments should be as close to equal in length as possible.

ra ngh No. of Nom. hppng daaItem no. (inches) L-feet inches lbs List price

300201 48 4 51 x 4 x 3 13 $ 116.00300202 60 4 63 x 4 x 3 14 133.00300203 72 4 75 x 4 x 3 16 152.00300204 84 4 87 x 4 x 3 17 170.00300205 96 4 99 x 4 x 3 19 187.00

300206 106 4 109 x 4 x 3 20 205.00300207 120* 6 123 x 4 x 3 22 228.00300208 132* 6 133 x 4 x 3 24 246.00300209 144* 6 147 x 4 x 3 25 263.00300210 156* 6 159 x 4 x 3 27 280.00

300211 168* 6 169 x 4 x 3 28 298.00

300212 180* 6 183 x 4 x 3 30 322.00300213 192* 8 195 x 4 x 3 31 340.00300214 204* 8 207 x 4 x 3 33 358.00300215 216 8 219 x 4 x 3 34 375.00

* Rail kits from 120 to 204 inches normally ship truck freight. For UPS shipment, addone cut and splice fee per rail set (item no. 990201, $30.00).

Ships via truck freight only.

SolrMount stndrd rils: 2-ril itsEach kit contains 2 rails equal to the row length, L-feet, and hardware to join L-feet to rails.


8/32



Page

8

R

SolrMount stndrd 4-ril its for long rowsEach kit contains four rail segments, two splices, L-feet, and hardware to join L-feet to rails. Rail segmentsand splices assemble into two spliced rails equal to the row length. These kits ship via truck freight only.

ra ngh sgmn ngh No. of Nom. hppng daa

im no. (nh) (nh) l-f nh b l p

300224 226 106 /120 10 123 x 5 x 3 40 $ 411.00300225 240 120 /120 10 123 x 5 x 3 42 428.00300226 252 132 /120 10 135 x 5 x 3 44 446.00300227 264 132 /132 10 135 x 5 x 3 46 457.00300228 276 144/132 10 147 x 5 x 3 47 476.00

300229 288 144 /144 10 147 x 5 x 3 48 493.00300230 300 156 /144 12 159 x 5 x 3 50 517.00300231 312 156 /156 12 159 x 5 x 3 52 534.00300232 324 168 /156 12 171 x 5 x 3 53 551.00300233 336 168 /168 12 171 x 5 x 3 54 569.00

300234 348 180 /168 14 183 x 5 x 3 56 586.00300235 360 180 /180 14 183 x 5 x 3 58 599.00300236 372 192 /180 14 195 x 5 x 3 59 616.00300237 384 192 /192 14 195 x 5 x 3 60 634.00300238 396 204 /192 14 207 x 5 x 3 62 652.00

300239 408 204 / 204 14 207 x 5 x 3 64 669.00300240 420 216 / 204 16 219 x 5 x 3 65 694.00300241 432 216 / 216 16 219 x 5 x 3 66 704.00


301007 1 a. 120 n. 13 b. 121.00301008 1 a. 132 n. 14 b. 133.00301009 1 a. 144 n. 16 b. 146.00301010 1 a. 156 n. 17 b. 155.00

301011 1 a. 168 n. 18 b. 166.00301012 1 a. 180 n. 19 b. 178.00301013 1 a. 192 n. 21 b. 190.00301014 1 a. 204 n. 22 b. 201.00301015 1 a. 216 n. 23 b. 213.00301016 1 a. 228 n. 25 b. 224.00

301017 1 a. 240 n. 26 b. 235.00301018 1 a. 252 n. 27 b. 247.00301020 1 a. 276 n. 30 b. 270.00301022 1 a. 300 n. 32 b. 292.00

SolrMount HD (hevy duty) rils (Specil Order)Mill Finish aluminum

im no. Dpon Nomna hppng wgh l p301116 1 a. 108 n. 12 b. 123.00

301118 1 a. 132 n. 14 b. 149.00301119 1 a. 144 n. 16 b. 161.00301121 1 a. 168 n. 18 b. 187.00

301123 1 a. 192 n. 21 b. 213.00301124 1 a. 204 n. 22 b. 225.00

301127 1 a. 240 n. 26 b. 264.00301128 1 a. 252 n. 27 b. 277.00

301132 1 a. 300 n. 32 b. 328.00

SolrMount HD (hevy duty) rils (Specil Order)Clear Anodized aluminum


9/32



Page

9

R


M Fnh301137 1 a. 144 n. 16 b. 134.0

301139 1 a. 168 n. 18 b. 157.0301142 1 a. 204 n. 22 b. 191.0

SolrMount HD (hevy duty) rils (Specil Order)Mill Ship aluminumRail order must meet minimum of 2000 lbs to be shipped directly from mill.


ca Anodzd301154 1 a. 132 n. 14 b. 139.0

301159 1 a. 192 n. 21 b. 202.0301160 1 a. 204 n. 22 b. 214.0

301163 1 a. 240 n. 26 b. 251.0

SolrMount HD (hevy duty) rils (Specil Order)Clear Anodized mill ship aluminumRail order must meet minimum of 2000 lbs to be shipped directly from mill.


10/32



Page

10

R

Splices for SolrMount stndrd rilPRO-PAK: Order one splice wherever two segments are to bejoined into a single rail.

Hanger bolt

Driver

Hnger bolts nd driverUsed in conjuction with L-feet, 8-inch hanger bolts supportSolarMount rails above tile or corrugated metal roofs. A driver allowseasy insertion into 3/16-inch pilot holes in the rafters.

NomnaPa no. Dpon Quany hp w. (b) l p

310046 8" x 3/8" hanger boltwith s/s nut and washers 20 5 215.00

310026 Driver for 3/8 hanger bolt 1 1 23.63

Nom. hp lPa no. Dpon Qy. w. (b) p

310229 Bar w/ hardware 20 10 118.00310216 Plate w/hardware 20 14 285.00

Pro-Pak SplicesUse Pro-Pak component pricing when regularly usingSolarMount on multiple installations.

Splice Bar forSolarMount

Standard and HeavyDuty Rail

(Recommended)

Splice Plate forSolarMount

Standard and HeavyDuty Rail

SOLARMOUNTaccessories Price List


11/32



Page

11

R

cab and hm

Nom. hpPa no. Dpon Qy w. (b) l p

990104 Push mount cable tie, black 100 1 $30.00

990105 Shim, 11/2 x 2 x 1/16, blue 20 1 4.20990106 Shim, 11/2 x 2 x 1/8, red 20 1 5.15990107 Shim, 11/2 x 2 x 1/4, black 20 1 6.46

990108 Tapered shim, 11/2 x 33/8,black plastic 20 1 12.32

Cable tiesCable ties fit into 1/4-inch holes drilled alongSolarMount rails.

ShimsShims level or raise standoffs and L-feet and preciselyalign rails. Horseshoe shims come in three color-codedthicknesses. Our tapered shim is particularly useful inleveling.

sandad an fan

Avoid chasing fasteners after job-site drop. FrequentSolarMount users can keep spares handy in their toolboxes.

Nom. hpDpon Qy w. (b) Pa no. l Price

ca fnhT-Bolt and Nut - 2 20 1 321213 30.00T-Bolt and Nut - 2 20 1 321215 35.00

Dak fnh

T-Bolt and Nut - 2 20 1 321275 40.00

suy hadwaSecurity hardware dramatically increases the difficulty and timerequired for a thief to dismantle a PV array and steal its components.Breakaway nuts work well in conjuction with top mounting clampsand footing bolts.

Note that starhead bolt heads do not fit into SolarMount rail slots

(where standard bolt heads are inaccessible). Use them where headsare exposedwith bottom mounting module clips, for example.

Dpon Quany Pa no. l p

Starhead bolt, s/s, 3/8 x 11/4 20 321221 72.00Breakaway nut, aluminum, 1/4 20 321222 25.00

Breakaway nut, aluminum, 3/8 20 321223 33.00Star key, 1/4 1 321209 19.61

Star key, 3/8 1 321210 23.63

Una goundng p 1 (UGc-1)

Nomna hpim no. Quany wgh (b) l p

980005 10 1 $ 24.15980006 50 1 117.00980002 100 1 229.00980003 250 2 557.00980004 500 4 1,092.00

Unirac Grounding Clip 1

Nomna hpim no. Quany wgh (b) l pe

980011 10 2 125.00980012 100 8 1,115.00

WeeB Goundng ug

Po-Pak Goundng Hadwa

WEEB Grounding Lug


12/32



Page

12

R

ra ngh lg k mod numb

(nh) 310110 310111 310112

Sizing Chrt: Tilt ngles for high profile legsIn high profile arrays, tilt angles depends on leg and rail lengths.

ra ngh lg k mod numb

(nh) 310107 310108 310109

48 921 3060

60 717 2460 3760

72 614 1954 3160

84 512 1746 2660

96 410 1440 2360

106 4 9 1336 2160

120 2660 512 1647

132 2460 511 1542

144 2260 410 1338

156 2060 4 9 1235

168 1855 4 9 1133

180 1751 3 8 1130

Rails 120 to 180 inches longrequire leg kits with a longand a short leg for each rail, 4legs per kit.

For rails 48 to 106 inches long,use leg kits with a single leg

per rail, 2 legs per kit.

Price List: High profile tilt legs (2 leg it)Each kit contains two square tubes, two strut inserts, and fastenersfor use with SolarMount rail kits (pp. 13-14).

Maxmum g Nom. hppng daa

Pa no. xnon (nh) nh b l p

310107 12 10 x 2 x 4 3 $54.00310108 44 26 x 2 x 4 7 82.00310109 72 40 x 2 x 4 10 108.00

Price List: High profile tilt legs (4 leg it)

Maxmum g Nom. hppng daa

Pa no. xnon (nh) nh b l p

310110 104 56 x 4 x 4 20 $227.00310111 18 13 x 4 x 4 7 101.00310112 64 36 x 4 x 4 16 169.00

High profile tiltlegs (2 leg kit)

High profile tiltlegs (4 leg kit)

SOLARMOUNTTilt Leg Sizing Chrt & Price List


13/32



Page

13

R

aEE

AE80J* 15-19 31-49 45-60

BP Solr

BP365 16-20 34-53 49-60

BP380, -485 15-20 32-51 47-60

BP3125 11-14 24-37 34-56

BP3150, -3160, -4175 11-14 22-35 32-53

BPSX160B, -170B 11-13 22-35 32-53

Evergreen

EC102, -110, -115 12-15 24-38 35-58

ES170RL, -180RL, -190RL 16-20 34-53 48-60

GE Energy

GEPV072, -085 15-19 31-49 45-60

GEPV100, -110 21-27 45-60 60

GEPVp130 13-16 26-41 38-60

GEPV173 21-27 45-60 60

GEPVp185, -200 12-16 26-41 38-60

Isofoton

I-100 17-21 36-56 51-60

I-150S 17-21 36-56 51-60

I-165 17-21 36-56 51-60

kne

G-EA060, G-SA060 19-24 40-60 58-60

kyocer

KC80, 80-01, 85T, 85TS 12 - 21 33 - 60 N/A

KC158G, 167G,170GT, 175GT,KD180GXLP

10 - 16 26 - 46 38 - 72

KC120-1, 125, 125G, 125GT, 130GT,130TM, 187G, 190GT, 200GT

9 - 15 23 - 42 34 - 65

KC130SX-MP, 135SX-MP, KD130GX-LP, 135GX-LP, KD205GX-LP, 210GXLP

7 - 14 22 - 40 33 - 60

Mitsubishi

PVMF110EC3, -120EC3 13-17 27-43 39-60

PVMF125EA2LF, -130EA2LF 15-19 31-50 45-60

PVMF165EB3 12-15 26-40 37-60

Photowtt

PW750, -1650 14-17 29-45 41-60

Snyo

HIP-190BA3, -195BA3, -200BA3HIP/HIT xxxDA3

14-18 30-47 42-60

Schott Solr

ASE300, -315, -330 15-19 31-49 44-60

Shrp

NE-80EJEA 14-18 31-48 44-60

ND-L3EJEA (123w), -L5EIU (125w) 13-17 28-44 40-60

ND-N2ECU 17-21 36-56 51-60

ND-162U1, -162U1F, -167U3,-167U1F

17-21 36-56 51-60

NE-165U1, NT-175U1 12-15 25-39 36-59NE170U1, -175U1 15-19 31-50 45-60

ND-200U1, -200U1F, -208U1, 208U1F 13-16 27-42 39-60

SolrWorld (Shell)

80P, 85P, SP75, SQ80 14-18 30-47 43-60

65P, -PC; 75P, -PC; SQ165 12-15 25-39 36-60

SW 230-SW245 mono 9-12 20-33 30-50

SunPower

SPR90, -95 17-21 35-55 50-60

SPR200BLK, -210, -215BLK, -220 17-22 37-58 53-60

Suntech

STP060-12/Sb, STP085S 17-21 35-56 51-60STP110-12Tb; STP115-12Tc; STP120,-130, -140

10-13 21-33 30-49

STP110-24Ab; STP175-24Ab1 9-12 19-30 28-45

SunWize

SW85, -90, -95 12-15 25-40 36-60

SW100, -110, -115, -120 12-15 25-40 36-60

SW155, -165 11-14 23-36 33-54

UniSolr

ES62T 15-19 31-49 44-60

US64 17-21 35-56 51-60

Yingli

YL80, -85 16-20 33-52 48-60

Sizing Chrt: Tilt ngles for low profile djustble leg itsIn low profile arrays, tilt angles depend on leg length and module length. If ordering kits for use with SolarMount rail kits, no other items arerequired. If ordering for use with Pro-Pak rails, then L-feet must also be ordered.

lg k mod numb

Modu mak and mod 310121 310122 310123

lg k mod numb

Modu mak and mod 310121 310122 310123

*Mount with bottom mounting clips only.In low profile tilt-up applications, mount with top mounting clamps only.

Price List: Low profile tilt legs (1 leg per it)Each low profile tilt leg kit contains one square tube and one strut insert,two L-feet, and stainless steel hardware for use with SolarMount rail kit.

Maxmum g Nom. hppng daaPa no. xnon (nh) nh b l p310121 12 10 x 3 x 3 2 $38.00310122 30 19 x 3 x 3 3 47.00310123 44 26 x 3 x 3 4 55.00

Sizing Chrt: Quntity oflow profile tilt legs requiredThe number of tilt legs required in a low profile array depends on thelength of the mounting rails.

Rail length per row Tilt legs required per row

48" to 106" 2

120" to 180" 3

192" to 216" 4

226" to 288" 5

300" to 336" 6

348" to 408" 7

420" to 432" 8


14/32



Page

14

R

SOLARMOUNT and SUNFRAMETop Mount Sizing

A 24 - 26 0.94 - 1.02 2B 30 - 32 1.18 - 1.26 2C 34 - 36 1.34 - 1.42 2D 38 - 40 1.50 - 1.57 2 1/2K 39 - 41 1.54 - 1.61 2 1/2J 41 - 43 1.61 - 1.69 2 1/2F 45 - 47 1.77 - 1.85 2 1/2M 47 - 49 1.85 - 1.93 2 1/2E 50 - 52 1.97 - 2.05 2 1/2N 57 - 59 2.24 - 2.32 2 1/2H Sanyo lipped modules 1 1/2 SolarMount onlyG Sharp lipped modules SolarMount only

Bolt

LengthInchesMillimeter

Unirac

LetterModule Thickness

The measurement shown above is the clamping height of the endclamp. Refer to the module chart for the Unirac Letter designationsthat apply to various module heights.

ClampingHeight


15/32



Page

15

R

A modu 2426 mm hk (0.94- 1.02)

PRO-Pak: Clamps with T-bolts and flange nuts

Cler nodized Nomna

camp Qy Pa no. l p hp w. (b)

End 20 320012 46.00 4

Mid 100 320008-100 248.00 920 320020 51.00 4

Dr bronze nodized Nomna


Mid 100 320119-100 342.00 2

Cmodu 34-36 mm hk (1.34- 1.42)


Cler nodized Nomnacamp Qy Pa no. l p hp w. (b)

End 20 320014 46.00 4100 320003-100 222.00 9

Mid 100 320008-100 248.00 920 320020 51.00 4



End 20 320081 59.00 4 100 320117-100 287.00 9

Mid 20 320084 71.00 4100 320119-100 342.00 9

D modules 38 40 mm thic (1.50 - 1.57)PRO-Pak: Clamps with T-bolts and flange nuts


end 20 320015 46.00 4100 320004-100 222.00 9

Md 20 320020 51.00 4100 320008-100 248.00 9



end 20 320185 59.00 4100 320173-100 287.00 9

Md 20 320084 71.00 4100 320119-100 342.00 9

Bmodu 30-32 mm hk (1.18- 1.26)

PRO-Pak:Clamps with T-bolts and flange nutsCler nodized Nomna

camp Qy Pa no. l p hp w. (b)End 20 320013 46.00 4

100 320002-100 222.00 9

Mid 100 320008-100 248.00 920 320020 51.00 4

Dr bronze nodized Nominl


Mid 100 320119-100 342.00 9

You w nd 1 k fo ah ow of modu you pan o moun.

Use Pro-Pak component prices when regularly using SolarMount on multiple installations. See pages 6-8 for the clampsize for your module type. End clamps: Order 4 for each row of modules you plan to mount. Mid clamps: For each row,

take one less than the number of modules in the row and multiply that figure by 2. For example, a row of 4 modules

requires 6 mid clamps: (4 - 1) x 2 = 6. You should verify that the module thickness matches the size given for each top

clamp. Manufacturers may change dimensions without notice.

SOLARMOUNTTop & Bottom Mounting Clmps

Mid clamp,sizes A F,JK, & MN

Clamps are sized tothe thickness of thePV modules you aremounting.

End clamp,sizes A F,JK, & MN


16/32



Page

16

R



End 20 320016 46.00 4100 320005-100 222.00 9

Mid 20 320021 51.00 4100 320009-100 248.00 9

Dr bronze nodized Nomnacamp Qy Pa no. l p hp w. (b)

end 100 320118-100 287.00 9

Md 20 320085 71.00 4100 320120-100 342.00 9

top & Boom Mounng camp (onnud)

F fo modu 45 47 mm hk (1.77 - 1.85)



end 20 320017 46.00 4100 320006-100 222.00 9

Md 20 320021 51.00 4100 320009-100 248.00 9



end 20 320123 59.00 4100 320124-100 287.00 9

Md 20 320085 71.00 4

100 320120-100 342.00 9

E fo modu 50 52 mm hk (1.97 - 2.05)

In Size G, end clampsemploy a spacer, but areotherwise identical tomid clamps.

Spacer

End clamp

Mid clamp

PRO-Pak:Clamps with hexhead bolts and flange nuts Dr Bronze anodized Only


A * 20 320086 71.00 4

*In size H, end clamps and mid clamps are identical. Hexhead boltsreplace T-bolts.

H fo sanyo ppd moduG fo shap ppd moduPRO-Pak: Clamps with T-bolts and flange nuts Dr Bronze anodized Only Nomnacamp Qy Pa no. l p hp w. (b)

end 20 320083 59.00 4

Md 20 320087 71.00 4

PRO-Pak:Clamps with T-bolts and flange nutsCler nodized Nomna


end 20 320079 46.00 4100 320080-100 222.00 9

Md 20 320021 51.00 4

100 320009-100 248.00 9



end 20 320240-020 59.00 4100 320240-100 287.00 9

Md 20 320085 71.00 4100 320120-100 342.00 9

Jfo modu 41 43 mm hk (1.61 - 1.69)


17/32



Page

17

R

top & Boom Mounng camp (onnud)



End 20 320221 46.00 4100 320220-100 222.00 9

Mid 20 320020 51.00 4



End 20 320234 59.00 4100 320233 287..00 9

Mid 20 320084 71.00 4100 320119-100 342.00 9

PRO-Pak: Clamps with T-bolts and flange nuts. Cler nodized only Nomna


End 20 320332-0020 46.00 4100 320332-0100 222.00 9

Mid 20 320021 51.00 4100 320009-100 248.00 9

K fo modu 39 41 mm hk (1.54 - 1.61)

Mfo modu 47 49 mm hk (1.85 - 1.93)

L fo sanyo bfaa modu on hadsoaMoun aSanyo HIP/HIT xxx DA3 Bifacial.

kITS: PRO-Pak: Clamps with hex head bolts and flange nuts. Cler anodized Only Nomnacamp Qy Pa no. l p hp w. (b)

A* 20 320331 76.00 4

* In size L mid clamp and end clamps are identical.Hex Head bolts replace T-bolts

Nfo modu 57 59 mm hk (2.24 - 2.32)kITS: PRO-Pak: Clamps with T-bolts and flange nuts. Cler anodized Only Nomnacamp Qy Pa no. l p hp w. (b)

End 20 320333-0020 46.00 4100 320333-0100 222.00 9

Mid 20 320021 51.00 4100 320009-100 248.00 9

Bottommounting clip

NominalQuantity ship wt. (lbs) Part no. List price

20 3 321002 40.00150 12 321001-150 195.00

Bottom Mounting ClipsClips for ll modules with mounting holes in thebc of the frme.

Bottom Mounting Clips

L mountingclamp


18/32


Master Price List SolarMount-I

Page

18

R

SolarMount-Icomponn P l

soaMoun-i, hadwa and ao - ca Anodzd (Un ohw pfd)Part no. Description Pack Qty Ship wt (lb.) Price

Beams

010144M-0050 1.0 Beam 144 MILL 50 200 $ 1 ,895.00011144M-0020 2.5 Beam 144 MILL 20 130 1,053.00011192M-0020 2.5 Beam 192 MILL 20 175 1,370.00

Attachments

004002M-0048 Two Flange Connection w/3 Screws 48 8 429.00004003M-0048 Two Flange Connection w/3 Screws & Butyl, 48 11 429.00004004M-0048 Two Flange Connection - NO HARDWARE 48 8 381.00004011M-0048 One Flange Connection w/Lag Bolt 48 9 387.00004012M-0048 One Flange Connection - NO HARDWARE 48 8 347.00

005011C-0024 Tile Hook Top Mount w/Lag Bolt & 1Flange Connection 24 21 809.00

005021C-0018 QuickMount AL Flashing 9.5x12.5 w/1Flange Connection 18 13 569.00904015D-0048 Unirac Flat Flashing - BLACKfinish - Flashing & Aluminum Square ONLY 48 21 851.00

005013C-0024 3 Standoff 2-Piece Alum w/One Flange Connection 24 20 345.00005014C-0024 4 Standoff 2-Piece Alum w/One Flange Connection 24 20 362.00005016C-0024 6 Standoff 2-Piece Alum w/One Flange Connection 24 20 395.00005017C-0024 7 Standoff 2-Piece Alum w/One Flange Connection 24 20 411.00

Splices

003020M-0025 Splice Kit 25 2 97.00003021M-0025 Splice kit w/grounding 25 2 194.00

Top Mounting Hardware

Module thickness

End Clamp: Inches mm

002001C-0048 EndClamp A (0.94 - 1.02) (24 - 26) 48 5 133.00

002002C-0048 EndClamp B (1.18 - 1.26) (30 - 32) 48 5 133.00002003C-0048 EndClamp C (1.34 - 1.42) (34 - 36) 48 5 133.00002004C-0048 EndClamp D (1.50 - 1.57) (38 - 40) 48 5 133.00002005C-0048 EndClamp E (1.97 - 2.05) (50 - 52) 48 5 133.00002006C-0048 EndClamp F (1.77 - 1.85) (45 - 47) 48 5 133.00002009C-0048 EndClamp J (1.61 - 1.69) (41 - 43) 48 5 133.00002010C-0048 EndClamp K (1.54 - 1.61) (39 - 41) 48 5 133.00002011C-0048 EndClamp M (1.85 - 1.93) (47 - 49) 48 5 133.00002012C-0048 EndClamp N (2.24 - 2.32) (57 - 59) 48 5 133.00

Mid Clamp:

002026C-0048 MidClamp A (0.94 - 1.02) (24 - 26) 48 5 133.00002027C-0048 MidClamp B,C (1.18 - 1.42) (30 - 36) 48 5 133.00002028C-0048 MidClamp D,K (1.50 - 1.61) (38 - 41) 48 5 133.00002030C-0048 MidClamp E,F,J,M,N (1.61 - 2.05) (41 - 52) 48 5 133.00

Accessories008000S-0050 UGC-2 SolarMount-I grounding clip 50 3 115.00008010M-0024 Enphase Mounting Kit 24 3 62.00


19/32

SolarMount-I Master Price List


Page

19

R

ONE FLaNGE CONNECTION

CREOTECCTILE HOOk (TOP)

TWO FLaNGE CONNECTION

MID/END CLaMPBEaM SPLICE

STaNDOFF(2-piece aluminum)

SOLaRMOUNT-I 1.0BEaM (144)

SolarMount-Icomponn


20/32


Master Price List SunFrame

Page

20

R

SUNFRAME

SunFrme threded slot rilSelect finish to match PV module frames.

Nomna hppng daa

Pa no. Dpon nh b. l p

Dak bonz anodzd

302011 8 ea. 192 in. 195 x 6 x 8 144 $1,581.00302012 1 ea. 192 in. 195 x 2 x 3 217.00302013 (pa od) 8 ea. 96 in. 99 x 6 x 8 72 830.00302014 (pa od) 1 ea. 96 in. (2 rails minimum) 99 x 2 x 3 10 113.00

ca anodzd

302015 8 ea. 192 in. 195 x 6 x 8 144 1,373.00302016 1 ea. 192 in. 195 x 2 x 3 190.00302017 (pa od) 8 ea. 96 in. 99 x 6 x 8 72 720.00302018 (pa od) 1 ea. 96 in. (2 rails minimum) 99 x 2 x 3 10 99.00

Weve completed our upgrade to the most installation-friendly SunFrame yet. Improved cap strip screwsand cap strips prepunched at 8-inch intervals team up with our new threaded slot rail to ensure a sound,aesthetically pleasing installation. SunFrame saves you money by saving you time on the job site. Note:Dark Bronze anodized looks black. Clear anodized looks silver. Pick the rail and accessories to match thecolor of your module frames.


21/32

SunFrame Master Price List


Page

21

R

Cp strips for 34 36 mm modules (1.34 - 1.42)

Select finish to match PV module frames.Requires -inch cap strip screw.

Nomna hppng daa


Dak bonz anodzd321103 8 ea. 192 in. 195 x 2 x 3 35 $482.00321110 8 ea. 96 in. 99 x 2 x 3 18 256.00321111* 1 ea. 96 in. 99 x 2 x 3 4 35.00

ca anodzd

321106 8 ea. 192 in. 195 x 2 x 3 35 421.00321137* 1 ea. 192 in. 195 x 2 x 3 6 58.00321112 8 ea. 96 in. 99 x 2 x 3 18 225.00321113* 1 ea. 96 in. 99 x 2 x 3 4 31.00

*Require minimum of two cap strips and two rails per order.


Requires -inch cap strip screw.

Nomna hppng daa


Dak bonz anodzd

321178 8 ea. 192 in. 195 x 2 x 3 35 $482.00321179 8 ea. 96 in. 99 x 2 x 3 18 225.00

ca anodzd

321107 8 ea. 192 in. 195 x 2 x 3 35 $421.00321114 8 ea. 96 in. 99 x 2 x 3 18 225.00

Cp strips for 49 51 mm modules (1.93 - 2)

Select finish to match PV module frame. Use clearfor Schott Solar ASE series.Requires 1-inch cap strip screw.

Nomna hppng daa


Dak bonz anodzd

321104 8 ea. 192 in. 195 x 2 x 3 35 $580.00321116 8 ea. 96 in. 99 x 2 x 3 25 305.00

ca anodzd

321108 8 ea. 192 in. 195 x 2 x 3 35 482.00

321118 8 ea. 96 in. 99 x 2 x 3 25 256.00

C

D

E


Requires 1-inch cap strip screw.

Nomna hppng daa


Dak bonz anodzd

321126 8 ea. 192 in. 195 x 2 x 3 35 $561.00321133* 1 ea. 192 in. 195 x 2 x 3 6 77.00321127 8 ea. 96 in. 99 x 2 x 3 18 298.00

ca anodzd

321109 8 ea. 192 in. 195 x 2 x 3 35 470.00321120 8 ea. 96 in. 99 x 2 x 3 25 250.00

Cp strips for Shrp lipped modules

Requires 1-inch cap strip screw.

Nomna hppng daa


Dak bonz anodzd

321105 8 ea. 192 in. 195 x 2 x 3 35 $653.00321122 8 ea. 96 in. 99 x 2 x 3 25 341.00

Cp strips for Snyo lipped modulesExcept Bifacial. See LRequires -inch cap strip screw.

Nomna hppng daa


Dak bonz anodzd

321129 8 ea. 192 in. 195 x 2 x 3 35 $597.00321130 8 ea. 96 in. 99 x 2 x 3 23 317.00

Cp strips for 41-43mm modules (1.61 - 1.69)

Requires -inch cap strip screw.

Nomna hppng daa


ca anodzd

321181 8 ea. 192 in. 195 x 2 x 3 35 $470.00321180 8 ea. 96 in. 99 x 2 x 3 23 250.00

F

G

H

J

SUNFRAMEaccessories Price List


22/32


Master Price List SunFrame

Page

22

R

L-foot djusting slidersIncludes 2 lag bolts with flat washers and s/s footing boltwith flange nut.

Nomna hppng daa


310224 20 ea., mill finish 11 x 9 x 4 18 $303.00

Cp strip screws for threded slot rilCheck cap strip listing to determine correct screw length. Select finishto match rails and cap strips. All are -20 Type F thread-cutting screws,

18-8 stainless steel. Nomna hppngPa no. Dpon wgh (b) l p

-inch screws for cp strip sizes C, D, nd H

321153 100 ea., dark 2 $93.00321159 100 ea., clear 2 69.001-inch screws for cp strip sizes F nd G

321154 100 ea., dark 2 $101.00321157 10 ea., dark 11.24321160 100 ea., clear 2 76.001-inch screws for cp strip size E

321155 100 ea., dark 2 $108.00321161 100 ea., clear 2 83.001-inch screws for cp strip size L

321166-100 100 ea., dark 2 $114.00321166 10 ea., dark 13.39321165-100 100 ea., clear 2 91.00321165 10 ea., clear 10.50

End cps for rilsUV resistant plastic, with matching screws.

Nomna hppngPa no. Dpon wgh (b) l p

310226 20 ea., black 1 $68.00

Serrted L-feetSelect finish to match rails. Includes s/s bolts andflange nuts. Lag bolts are not included.

Nomna hppng

Pa no. Dpon wgh (b) l p

310065 20 ea., dark bronze 5 $93.00310067 20 ea., clear 5 89.00

Cp strips for 57-60mm modules (2.26 - 2.36)Sanyo Bifacial. Requires 1-inch screwsSharp ND-U1Y

Nomna hppng daa


Dak bonz anodzd

321174 8 ea. 192 in. 195 x 2 x 3 45 $620.00321176 8 ea. 96 in. 99 x 2 x 3 25 326.00

ca anodzd

321170 8 ea. 192 in. 195 x 2 x 3 45 $516.00321172 8 ea. 96 in. 99 x 2 x 3 25 274.00

L

NomnaPa no. typ Qy. hp w.(b) l P

Dak Anodzd310227 Bar w/ hardware 20 10 $124.00

ca Anodzd310229 Bar w/ hardware 20 10 118.00

Splices for SunFrme rilOrder one splice wherever two segments are to be joinedinto a single rail.


23/32

Page

23

RapidRac G10 Master Price List


R

Price List: RpidRc (Specil Order)Png h am fo a pa numb.

Nomna

im No. Dpon hp w. (b) l p

310351 RapidRac (bllst Frme only) 8 $ 104.00310355 RapidRac (bllst frme w/ module mount) 12 208.00

RAPIDRAC G10

We custom make RapidRac to the exact specifications of the module you will be racking. Every RapidRac part numberyou supply must have the correct four (4) digit suffix as that is what identifies the module. In order to get that suffixprecisely correct, we have two (2) options:

Option a Ahead of your order, contact Unirac Order Entry and send the module data sheet. YourOrder Entry contact will respond to you with the proper suffix to order.

Option B Send in your order with part number and the suffix you believe to be right (from the Excelprice list available only to distributors) and the module data sheet. Well check it and Order Entry willget back to you, requiring you to change your PO if your suffix is wrong.

In summary, all RapidRac orders must be accompanied by a module data sheet commonly found at modulemanufacturers website. The RapidRac produced will be matched to the data sheet you submit to us, so be sure to sendprecisely the right one.

Note: See RapidRac Configuration Guide for help onconfiguring, laying out, and ordering a RapidRac.


24/32

Page

24 Prices and specifications are subject to change without notice.

Master Price List RapidRacG10R

P l: rapdFoo, hadwa and ao

Nomna

Pa no. Dpon hp w. (b) l p

310370 RapidFoot assembly 5 $55.00

Flshings for RpidFoot

990120 Galvalume flashing #1 1 6.89990161 Patch, EPDM, Blk, Peel & Stick 1 7.02

DP1 Screws (14 guge nd down, wood or metl)

100 Pack:990430 Concealor Screw DP1 - 1 1/2 5 25.00990431 Concealor Screw DP1 - 2 5 28.00990432 Concealor Screw DP1 - 3 5 36.00990433 Concealor Screw DP1 - 4 5 44.00

990434 Concealor Screw DP1 - 4 1/2 5 51.00990435 Concealor Screw DP1 - 5 5 57.00990436 Concealor Screw DP1 - 6 5 69.00990437 Concealor Screw DP1 - 7 5 79.00

DP4 Screws (12 guge nd down, metl)

100 Pack:990410 Concealor Screw DP4 - 1 3/8 5 54.00990411 Concealor Screw DP4 - 2 3/4 5 56.00990412 Concealor Screw DP4 - 3 3/4 5 62.00990413 Concealor Screw DP4 - 4 3/4 5 75.00

990414 Concealor Screw DP4 - 5 3/4 5 81.00990415 Concealor Screw DP4 - 6 3/4 5 87.00990416 Concealor Screw DP4 - 7 3/4 5 95.00

accessories

310450 Ferrules #1, 4 ft. 1 23.63310440 Anchors #14 - 25 pack 6 17.01310445 Anchors #14 - 100 pack 22 68.00

RpidFoot:

1. 3/8 x 1-1/4 Bolt2. 3/8 x 1/8 x 1-1/2 Wsher3. Clmp Br4. EPDM Wsher5. Stndoff6. Top Plte7. Bse Plte

accessories (sold separately):

8. Flshing9. Concelor Screw10. Ferrules

(Note: For concrete roofs, Scru-lednchors must be used.)

1

2

3

4

5

6

7

8

9

10

RpidFoot attchment Option Price List

RAPIDRAC G10


25/32

UL-A Master Price List


Page

25

R

Item no. Description Nominal shipping weight List price

2 inch pipe cps, feet nd sliders, zinc plted steel

330001 1 ea., front cap 4 lbs. 71.00330002 1 ea., rear cap 4 lbs. 55.00

330004 1 ea., threaded foot 4 lbs. 41.00330005 1 ea., slider, 1 flange 2 lbs. 41.00

3 inch pipe cps, feet nd sliders, zinc plted steel

330010 1 ea., front cap 5 lbs. 100.00330011 1 ea., rear cap 5 lbs. 83.00330013 1 ea., threaded foot 5 lbs. 89.00330014 1 ea., slider, 1 flange 4 lbs. 69.00

2 inch pipe cps nd sliders, mill finish luminum

330019 1 ea., front cap 2 lbs. 43.00330020 1 ea., rear cap 2 lbs. 43.00330021 1 ea., slider 1 lbs. 20.48

2 inch brces nd brcets, mill finish luminum

330101 1 ea., 7 ft. brace 8 lbs. 68.00

330102 1 ea., 10.5 ft. brace 12 lbs. 99.00330103 1 ea., 14 ft. brace 16 lbs. 129.00330104 1 ea., rail mounting bracket 2 lbs. 18.99

3 inch brces nd brcets, mill finish luminum

330105 1 ea., 7 ft. brace 13 lbs. 109.00330106 1 ea., 10.5 ft. brace 19 lbs. 158.00330107 1 ea., 14 ft. brace 25 lbs. 207.00330108 1 ea., rail mounting bracket 2 lbs. 22.18

Rail Mounting and Pipe Structure Components

Mid Clamp

Front leg cap Alu-minum (left) or steeloptions

End clamp

Module fasteners

Clear anodized aluminum, unless noted otherwise

Item no. Description Nominal shipping weight List price

SolrMount End Clmps with T-bolts nd flnge nuts

320012 20 ea., size A 6 lbs. 46.00320013 20 ea., size B 6 lbs. 46.00320014 20 ea., size C 6 lbs. 46.00320015 20 ea., size D 6 lbs. 46.00

320016 20 ea., size E 6 lbs. 46.00320017 20 ea., size F 6 lbs. 46.00320083 20 ea., size G, dark bronze 6 lbs. 59.00320079 20 ea., size J 6 lbs. 46.00

SolrMount Mid Clmps with T-bolts nd flnge nuts

320020 20 ea., size A-B-C 6 lbs. 51.00320021 20 ea., size D-E-F-J 6 lbs. 51.00320086 20 ea., size H, dark bronze 6 lbs. 71.00320087 20 ea., size G, dark bronze 6 lbs. 71.00

Other Module Fsteners with s/s nuts nd bolts

321002 20 ea., SolarMount bottom mounting clip 5 lbs. 40.00

Rail mountingbracket

Rear leg cap Alu-minum (left) or steeloptions

SliderAluminum(right) or steel options

U-LAPrice List


26/32


Master Price List Attachments

Page

26

R

Flt-top one-piece, zinc plted steel stndoffsShaft outside diameter = 15/8 inches. Includes s/s hardware.

NomnaPa no. sz Quany hp w. (b) l p

310051 3 in. 12 21 224.00310009-036 3 in. 36* 2 651.00

310052 4 in. 12 23 234.00310010-036 4 in. 36* 36 683.00

310053 6 in. 12 26 244.00310011-036 6 in. 36* 50 709.00310054 7 in. 12 28 268.00

990341 Lag bolt removal credit, per standoff (0.75)

ATTACHMENTS

Rised flnge, zinc plted steel stndoffsUse without L-feet. See also "Flashings for currentstandoffs" (p. 32).


310047 3 in. 12 16 232.00310017-36 3 in. 36 32 674.00

310048 4 in. 12 18 257.00310018-036 4 in. 36 40 748.00

310049 6 in. 12 22 274.00310019-036 6 in. 36 54 800.00

310050 7 in. 12 25 288.00310020-036 7 in. 36 57 841.00

Flt -top one-piece stndoff

Use with:

SOLARMOUNT

SOLARMOUNT HEAVY DUTY

SUNFRAME

Rised flnge stndoff

Use with:

SOLARMOUNTSOLARMOUNT HEAVY DUTY

SUNFRAME

*Lag bolts are not included in bulk quantities of 36 pieces.


27/32

Attachments Master Price List


Page

27

R

Flt-top two-piece luminum stndoffsShaft outside diameter = 15/8 inches.Includes s/s hardware.


Dak bonz anodzd310653 3 in. 12 9 168.00310603-060 3 in. 60* 45 814.00

310654 4 in. 12 10 182.00310604-060 4 in. 60* 50 877.00

310656 6 in. 12 12 207.00310606-060 6 in. 60* 60 1,003.00

310657 7 in. 12 13 219.00310607-060 7 in. 60* 65 1,063.00

ca anodzd310553 3 in. 12 9 161.00310503-060 3 in. 60* 45 777.00

310554 4 in. 12 10 173.00310504-060 4 in. 60* 50 836.00

310556 6 in. 12 12 198.00310506-060 6 in. 60* 60 959.00

310557 7 in. 12 13 212.00310507-060 7 in. 60* 65 1,030.00

Flt top two-piece

luminum stndoff

Use with:

SOLARMOUNT


SUNFRAME

No-calkollared flashing

Flshings for ll current stndoffsFits standoff O.D. of 15/8 inches.For pitched roofs up to 40 degrees. Not for hot mopped or built-uproofs

Nom. hp lPa no Dpon Qy w. (b) p

990101 Galvanized, 121/2 x 83/4 12 11 96.00base, No-Calk collar(Oatey # O-11840)

990102 Aluminum, 121/2 x 83/4 12 6 139.00base, No-Calk collar(Oatey # O-12920)

990103 Soft aluminum, 18 x 18 12 12 198.00

base, No-Calk collar(Oatey # O-12836)




28/32



Page

28

R

Nw fo 2011

FaFahngR

co ompv o xng ouon.

can b ud fo any ompoon hng naaon, nudng d aay. smp wo-pa fahng ouon ha do no o off h oof f doppd. td o whand 70 of andng wa. No addd aan qud, xp a na don.

For use with SolarMount SolarMount-I SunFrame

Una Fa Fahng - Dak FnhPart no. Description Pack Qty Ship Wt (Lbs) Price

Beams

904015D-0048 Unirac Flat Flashing 48 21 $851.00Flashing, attached gasket, and square aluminum plate ONLYNo lag bolt, washer, or rail attachment piece included


29/32



Page

29

R

310390 FastFoot 3 Stand Off Assm 20pk 35 905.00310391 FastFoot 4 Stand Off Assm 20pk 37 915.00310394 FastFoot 7 Stand Off Assm 20pk 42 939.00

Flshings for FstFoot

990120 Galvalume flashing #1 1 6.89990161 Patch, EPDM, Blk, Peel & Stick 1 7.02

DP1 Screws (14 guge nd down, wood or metl)100 Pack:

990430 Concealor Screw DP1 - 1 1/2 5 25.00

990431 Concealor Screw DP1 - 2 5 28.00990432 Concealor Screw DP1 - 3 5 36.00990433 Concealor Screw DP1 - 4 5 44.00

990434 Concealor Screw DP1 - 4 1/2 5 51.00990435 Concealor Screw DP1 - 5 5 57.00990436 Concealor Screw DP1 - 6 5 69.00990437 Concealor Screw DP1 - 7 5 79.00

P l: FaFoo, hadwa and ao

NomnaPa no. Dpon hp w. (b) l p

DP4 Screws (12 guge nd down, metl)

100 Pack:990410 Concealor Screw DP4 - 1 3/8 5 54.00990411 Concealor Screw DP4 - 2 3/4 5 56.00990412 Concealor Screw DP4 - 3 3/4 5 62.00990413 Concealor Screw DP4 - 4 3/4 5 75.00

990414 Concealor Screw DP4 - 5 3/4 5 81.00990415 Concealor Screw DP4 - 6 3/4 5 87.00990416 Concealor Screw DP4 - 7 3/4 5 95.00

accessories

310440 Anchors #14 - 25 pack 6 17.01310445 Anchors #14 - 100 pack 22 68.00310450 Ferrules #1, 4 ft. 1 23.63

NominalPart no. Description ship wt. (lbs) List price

Serrted L-feetSelect finish to match rails. Includes s/s bolts andflange nuts. Lag bolts are not included.

Nomna hppngPa no. Dpon wgh (b) l p

310065 20 ea., dark bronze 5 93.00310066-125 125 ea, dark bronze 33 568.00

310067 20 ea., clear 5 89.00310068-125 125 ea., clear 33 542.00

L-Foot

Use with:

SOLARMOUNT


SUNFRAME

FstFootUse with:

SOLARMOUNTSOLARMOUNT HEAVY DUTY

SUNFRAME(Flashing not included)


30/32



Page

30

R

Seamed Metal Roof Mounting Solution

A Una exuv!

Part No. Description Pack Qty. List price

004030M-0100 ACECLAMP - Primary Block - 100 $1720.00




aCECLaMP JR - aCECLaMP ONLY


004032M-0020 ACECLAMP Mid Clamp AB Mounting Kit 20 $123.00004032M-0100 ACECLAMP Mid Clamp AB Mounting Kit 100 $600.00

004043M-0020 ACECLAMP Mid Clamp CDJK Mounting Kit 20 $123.00

004043M-0100 ACECLAMP Mid Clamp CDJK Mounting Kit 100 $600.00

004044M-0020 ACECLAMP Mid Clamp EF Mounting Kit 20 $123.00

004044M-0100 ACECLAMP Mid Clamp EF Mounting Kit 100 $600.00

004033M-0020 ACECLAMP End Clamp A Mounting Kit 20 $123.00

004033M-0100 ACECLAMP End Clamp A Mounting Kit 100 $600.00

004034M-0020 ACECLAMP End Clamp B Mounting Kit 20 $123.00

004034M-0100 ACECLAMP End Clamp B Mounting Kit 100 $600.00

aCECLaMP JR Mounting Hrdwre (aCECLaMP NOT INCL.)


004035M-0020 ACECLAMP End Clamp C Mounting Kit 20 $123.00

004035M-0100 ACECLAMP End Clamp C Mounting Kit 100 $600.00

004036M-0020 ACECLAMP End Clamp D Mounting Kit 20 $123.00

004036M-0100 ACECLAMP End Clamp D Mounting Kit 100 $600.00

004037M-0020 ACECLAMP End Clamp E Mounting Kit 20 $123.00

004037M-0100 ACECLAMP End Clamp E Mounting Kit 100 $600.00

004038M-0020 ACECLAMP End Clamp F Mounting Kit 20 $123.00

004038M-0100 ACECLAMP End Clamp F Mounting Kit 100 $600.00004039M-0020 ACECLAMP End Clamp G Mounting Kit 20 $123.00

004039M-0100 ACECLAMP End Clamp G Mounting Kit 100 $600.00

004045M-0020 ACECLAMP Mid Clamp G Mounting Kit 20 $123.00

004045M-0100 ACECLAMP Mid Clamp G Mounting Kit 100 $600.00

004040M-0020 ACECLAMP Mid & End Clamp H Mounting Kit 20 $123.00

004040M-0100 ACECLAMP Mid & End Clamp H Mounting Kit 100 $600.00

004041M-0020 ACECLAMP End Clamp J Mounting Kit 20 $123.00

004041M-0100 ACECLAMP End Clamp J Mounting Kit 100 $600.00

004042M-0020 ACECLAMP End Clamp K Mounting Kit 20 $123.00

004042M-0020 ACECLAMP End Clamp K Mounting Kit 100 $600.00

aCECLaMP JR Mounting Hrdwre (aCECLaMP NOT INCL. - cont.)

Allows for more even load distribution

Tightens from the top...no more scraped knuckles

An economical seamed metal roof mounting solution

See animtionon Cover!


31/32



Page

31

R

Pa No. Dpon Pak Qy. l p

905011C-0024 RH - Front Mount Tile Hook 24 $778.00905012C-0024 RH - Side Mount Tile Hook 24 $778.00

905013C-0024 RH - Top Mount Tile Hook 24 $778.00

CREOTECCRoof Tile Hook

Creotecc Roof Tile HooCreotecc roof tile hooks come in three different mount types. Frontmount, side mount and top mount. Tile hooks can be used with anystandard racking system. For use with concrete tile or spanish tileroofs.

Creotecc Roof Tile HooSolrMount nd SunFrme ONLY

Roof Tile Hook Front Mount

Roof Tile Hook Side Mount

Roof Tile Hook Top Mount


908001S-0100 Single wire, wire clip 100 53.00908001S-0500 Single wire, wire clip 500 249.00908001S-1000 Single wire, wire clip 1000 446.00908002S-0100 Two wire, wire clip 100 55.00908002S-0500 Two wire, wire clip 500 263.00908002S-1000 Two wire, wire clip 1000 499.00

WIRE MANAGEMENT CLIPS

Wire Mngement ClipsStainless steel wire management clip that can be used withany module and Unirac mounting system.

Wire Mngement Clips


32/32

SOLARMOUNT-IRAPIDRAC G10SOLARMOUNT SUNFRAME UNIRAC LARGEARRAY (U-LA)

R

A HILTI GROUP COMPANY

InteractIve

Master Price listMarch 25th 2011

Documents

Unirac Solarmount