UNIVERSAL DIGITAL RADIOGRAPHIC SYSTEM

Z-MOTION

Z-MOTIONUniversal Digital Radiographic SystemSimplicity, Performance and SafetyZ

IMAGING FOR THE FUTURE• Small footprint: Replaces large, conventional x-ray systems• Compact Design: Minimum 8 foot ceiling height requirement• Fully motorized and manual movement capability in all movements• The latest in DR technology

Z-MOTIONZ-MOTIONUniversal Digital Radiographic SystemSimplicity, Performance and SafetyZ

IMAGING FOR THE FUTURE

UNIVERSAL DIGITAL RADIOGRAPHIC SYSTEM

Z-MOTION

EASY, QUICK POSITIONING.....INCREASES WORKFLOW

The Z-Motion Stand is fully motorized and counterbalanced. For faster positioning, the stand can be easily positioned in seconds by manually releasing the brake switches located on the x-ray tube and detector handles. The stand is equipped with four electric motors for precise and e� ortless positioning when using motorized selections.

The Z-Motion allows patients to sit, stand or lay down on a mobile radiographic table. The unique design preserves the alignment between the collimator and digital receptor in any position. With an SID range of 39” - 79” (100 - 200 cm), the stand o� ers a variety of examination possibilities including chest, oblique, table and lateral.

Z-MOTION STAND SPECIFICATIONSMotorized movements 6 reprogrammable, motorized movements with electric breaks and clutches

Manual movements Fully counterbalanced vertical and rotational movements, controlled by tube and detector side break-release switches

Vertical motion range 47.25” (125 cm) (motorized and manual)

Adjustable SID 39” - 79” (100 - 200 cm) (motorized and manual)

Arm rotation -30° - +120° (motorized and manual)

Flat Panel Detector Tilt ± 45° (motorized)

X-ray tube rotation ± 90° (manual)

Minimum required ceiling height 8’ (2,44 m)

Manual movement capabilities Cross-table lateral exposures

CONVENIENT OPERATING CONTROLS.....

All of the Z-Motion’s motorized and preprogrammed positions are integrated into the 7” user-friendly touchscreen display control which automatically rotates according to the Z-Motion’s arm position. This screen has a customized user interface, allowing operators to set and save the already 6 preprogrammed positions to their own preference at any time.

An additional detector side membrane control o� ers more operator � exibility and convenience during operation. A Bluetooth remote control is also provided for precise positioning.

“Sticky Position”: Convenient, selectable option on the 7” touchscreen display control. A� er being moved manually into the proximity of it’s desired position, the Z-Motion arm will automatically correct and move itself into it’s � nal position.

Optional stitching programs for 2 or 3 examination studies are available.

Bluetooth remote controlDetector side membrane control7” touchscreen control display

The APEX acquisiton so� ware package includes everything one would expect from today’s DR technologies. Acquire, manipulate, process, communicate and save your high quality DICOM images with the APEX acquisition so� ware.

All the bene� ts of DR are now available with APEX - an a� ordable digital imaging solution with state-of-the-art so� ware and single � at-panel DR technology.

11/2012 The manufacturer reserves the right to change speci� ca tions and features without notice.

UNIVERSAL DIGITAL RADIOGRAPHIC SYSTEM

Z-MOTION

GENERATOR SPECIFICATIONSkW range 32 / 40 / 50 / 65 / 80

kV range 40 - 150

mA range 400 / 500 / 650 / 800 / 1000

mAs range 0.5 - 600

Exposure time 3 (.003) ms - 6 seconds / 1 ms (.001) optional

Power requirements Varies depending on kW range

Mains frequency 50 / 60 Hz

X-RAY TUBE Wide variety of tubes are available from manufacturers such as Toshiba, Varian and Dunlee

HV CABLES Standard 30’ (10 m). Additional lengths are available

COLLIMATOR SPECIFICATIONSFunctionality Manual, laser guided, swivel mount collimator

Image coverage 17” x 17” (43 x 43 cm) at 40” (100 cm) SID

Illumination Minimum 160 lux (bulb or LED type)

GRIDS 2 grids included to accommodate di� erent SID exposures

SAFETY FIRST....

The Z-Motion stand is equipped with a comprehensive set of active and passive safety mechanisms including spatial awareness, proximity sensors which help detect collisions and mechanical safety features to protect both the user and patient.

An Emergency Stop botton located on the side of the column automatically shuts the stand o� when pressed.

For more information, please visit our website at www.cxmed.com or contactyour local authorized distributor.