1
OSI’s Universal Modem™ is a multi-standard modem with the capability of up to 33600 bps data transfers in leased line and private-line applications. Available in both rackmount and standalone form factors, the Universal Modem seamlessly integrates with new and legacy equipment. Configuration is made easy by an industry standard AT command set as well as easily accessible DIP switches. The RackMount Universal Modem is conveniently designed to be installed in OSI’s standard 16-slot OSI Modem/MEU Rack; ideal for clean deployments in control centers and Standalone Specifications communications rooms. The Standalone Universal Modem is Supply Voltage: 9-36V ruggedly designed for use in unmanned industrial applications. Maximum Power: 2.5W Key Features: Temperature: -40 0 85C (-40 – 185F) 2 or 4 wire lease line operation Unpowered Analog Line: 2 or 4 wire Configurable through an industry standard AT command Analog Port: RJ-25 set and easily accessible DIP switches RS-232: 9-pin D-sub Supports IT modulation standards: DTE Baud Rate: 300 bps -115200 bps V.34, V.32bis, V.32, V.23, V22bis, V.22, V.21 Automatic baud rate detection V.42/V.42bis error correction and data compression Mounting Capability: Panel Mount Supports Bell modulation standards: Height: 1.1 inches (7.91 mm) 103, 202, 212A Width: 7.18 inches (182.4 mm) Supports MNP 2-5 error correction and data compression Depth: 8.738 inches (221.94 mm) Drop-in replacement for existing OSI B202 Modems Configurable through DIP switches matching previous RackMount Specifications generation Supply Voltage: 100-240VAC, 47-63Hz RackMount* or Standalone capable Maximum Power: 40W Hot-swappable in RackMount applications Temperature: 0 – 70 C (32 – 158 F) Watchdog timer to ensure consistent and reliable Unpowered Analog Line: 2 or 4 wire operation Analog Port: RJ-25 RS-232: OSI Modem/MEU Rack Port B or C DTE Baud Rate: 300 bps – 115200 bps Automatic baud rate detection Mounting Capability: Rack Mount Height: 5.25 inches (133 mm) Width: 19 inches (482mm) Depth: 8.625 inches (222 mm) *The RackMount Universal Modem requires an OSI Modem/MEU Rack, OSI Modem/MEU Rack Power Supply and an available slot in the OSI Modem/MEU Rack for operation. + + + + + + + + + + ! ! ! + + + ! + + + + ! + + + + + + + + + + ! + + + + Product specifications in this document are subject to change without notice. Universal Modem osi universal modem hardware © Copyright 2013, Open Systems International, Inc. All rights reserved. Ver. 1.0 All other trademarks and registered trademarks are the property of their respective holders. www.osii.com Universal Modem Product Overview

Universal Modem PS

Embed Size (px)

DESCRIPTION

Universal Modem

Citation preview

Page 1: Universal Modem PS

OSI’s Universal Modem™ is a multi-standard modem with the capability of up to 33600 bps data transfers in leased line and private-line applications. Available in both rackmount and standalone form factors, the Universal Modem seamlessly integrates with new and legacy equipment. Configuration is made easy by an industry standard AT command set as well as easily accessible DIP switches.

The RackMount Universal Modem is conveniently designed to be installed in OSI’s standard 16-slot OSI Modem/MEU Rack; ideal for clean deployments in control centers and

Standalone Specificationscommunications rooms. The Standalone Universal Modem is

Supply Voltage: 9-36Vruggedly designed for use in unmanned industrial applications.Maximum Power: 2.5W

Key Features:Temperature: -40 0 85C (-40 – 185F)

2 or 4 wire lease line operationUnpowered Analog Line: 2 or 4 wire

Configurable through an industry standard AT command Analog Port: RJ-25set and easily accessible DIP switchesRS-232: 9-pin D-subSupports IT modulation standards:DTE Baud Rate: 300 bps -115200 bpsV.34, V.32bis, V.32, V.23, V22bis, V.22, V.21

Automatic baud rate detectionV.42/V.42bis error correction and data compressionMounting Capability: Panel MountSupports Bell modulation standards:Height: 1.1 inches (7.91 mm)103, 202, 212AWidth: 7.18 inches (182.4 mm)Supports MNP 2-5 error correction and data compressionDepth: 8.738 inches (221.94 mm)Drop-in replacement for existing OSI B202 Modems

Configurable through DIP switches matching previous RackMount Specificationsgeneration

Supply Voltage: 100-240VAC, 47-63HzRackMount* or Standalone capable

Maximum Power: 40WHot-swappable in RackMount applications

Temperature: 0 – 70 C (32 – 158 F)Watchdog timer to ensure consistent and reliable

Unpowered Analog Line: 2 or 4 wireoperation

Analog Port: RJ-25

RS-232: OSI Modem/MEU Rack Port B or C

DTE Baud Rate: 300 bps – 115200 bps

Automatic baud rate detection

Mounting Capability: Rack Mount

Height: 5.25 inches (133 mm)

Width: 19 inches (482mm)

Depth: 8.625 inches (222 mm)*The RackMount Universal Modem requires an OSI Modem/MEU Rack, OSI Modem/MEU Rack Power Supply and an available slot in the OSI Modem/MEU Rack for operation.

+

+

+

+

+

+

+

++

+!

!!

++

+!

++

++

!

+

+

+

+

+

+

+

+

+

+

!

+

+

+

+

Product specifications in this document are subject to change without notice.

Universal Modemosi universal modem

hardware

© Copyright 2013, Open Systems International, Inc. All rights reserved. Ver. 1.0All other trademarks and registered trademarks are the property of their respective holders.

www.osii.com

Universal Modem Product Overview