Upload
trinhtuyen
View
227
Download
0
Embed Size (px)
Citation preview
OVER 80 COLOURS MIX AND MATCH TO FIND YOURS
0800 115 232 ROOFER.CO.NZ UNRIVALLED NEW ZEALAND ROOFING
Calder Stewart Roofing; a company that has
withstood the tests of mother nature and father time.
When you’re from the south, you have to be tough.At Calder Stewart Roofing, we have always focused on
ensuring that our products meet the challenges of the
New Zealand climate.
Given the geographic location of Calder Stewart Roofing’s head
office (45 degrees south) we have a unique advantage when it
comes to testing our products.
Our outside “laboratories”, from the sub-alpine mountains of
central Otago to Southland and the fiords, provide the perfect test
for all our products.
Currently we’re testing on our Solar-Rib® & laminates at Dumpling
Hut on the Milford Track. With wind, snow and seven metres of
rain a year we reckon this beats the heck out of any wind tunnel.
So, whether you’re in downtown Auckland or Dunedin, and
you want peace of mind to know your roof can handle anything
mother nature throws at it, think of us.
Here’s where we were. Here’s where we’re going.In 1955, Bruce Stewart & Lance Calder went into business building hay barns
and dog kennels in rural Otago & Southland. Today, the company they began
is a major construction business, consistently building some of the country’s
largest commercial, industrial
and agricultural buildings.
Large manufacturing
divisions within the company
produce structural steel,
reinforcing, pre-cast concrete
and roofing products for internal
projects, the public and other
construction businesses.
The roofing division was born, like
many things at Calder Stewart
Industries, out of necessity. By 1970 the team were so busy building hay barns
and woolsheds that making their own cut-to-length iron became a necessity.
This wasn’t an easy feat. At the time, Wards Engineering in Christchurch was
one of the few companies in New Zealand capable of making the machinery
to produce the iron. Bruce Stewart, and sons Peter and Alan, had a long trip
home to Milton in the TK Bedford after collecting their first corrugate machine.
By 1974 the roofing division had grown so much a second factory was set
up in Invercargill along with a trapezoidal roofing profile that could be used
on any pitched roof. With new machines and the introduction of Colorsteel,
the roofing division went from strength to strength, leading to a Christchurch
branch being established in the mid-1980s. Around this time the company
moved into the installation
of roofing. And hired a rep
to cover the central Otago
region; Appie Borren. Appie
had one of the few car phones
in the district, the car horn
and lights were activated until
it was answered. Fortunately,
things have progressed…
The roofing division has seen
many changes over the years,
but what hasn’t changed are the company’s strong ties to the rural communities
and clients of Southland and Otago, or pride in being a family business. Today
Calder Stewart Roofing has manufacturing and installation operations in the North
& South Island, selling their unique range of roofing, architectural cladding and solar
roofing products to farmers, builders and homeowners.
Solar-Rib is New Zealand’s only roofing profile that is specifically designed
to generate electric power through the use of Photo-Voltaic Laminate
(PV Laminate) solar panel technology. An attractive profile offering elegant
looks, Solar-Rib can be installed without the PV Laminate, with the laminate
being added onto the profile at a later time if desired.
Solar-Rib represents a progressive product, paying for itself in the long run
and is an ideal way to combat increasing energy prices by taking advantage
of nature’s most renewable source of energy - the sun.
Our Solar-Rib laminate
The PV Laminate we use is sourced from Marcegaglia, a worldwide industry
leader in the steel and energy sector. It harnesses our strong UV and turns that
into electricity. The PV Laminate, made in Italy, is the next generation in solar
technology, moving away from bulky, fragile glass panels that bolt into the roof.
PV Laminates blend seamlessly into the roof design. You can have your home,
shed, farm or commercial building generating all its own power, or feeding back
into the grid. The PV Laminates are extremely durable, recyclable and work at
very high efficiency rates even on low pitch or shaded roof areas.
The power generator.
Solar-Rib®
grandest buildings in Europe, to match our most contemporary homes. You don’t
want to settle for second best or anything that will date or deteriorate. Calder
Stewart thinks the same way. So Euro-Tray is designed to withstand the harshest
of New Zealand’s climates without compromising on premium aesthetics.
If style’s important; if you’re after a roof with elegance and distinction – choose
Calder Stewart Euro-Tray. Calder Stewart’s top-of-the-line Euro-Tray range is a
proven roof that delivers exceptional durability and performance with sharp, clean
lines and timeless style. This roofing profile is inspired by some of the oldest and
Introducing Euro-Tray, our designer series.
Euro-Tray®
Euro-Tray Double Standing Seam
Following a traditional European design and exhibiting a modern day seamless
appearance, Double Standing Seam is typically specified and formed using
higher end materials like copper, zinc and aluminum.
Euro-Tray Roll Seam
Creating a slightly softer finish and a larger shadow effect than Euro-Tray Roll
Cap, Euro-Tray Roll Seam can be machine curved to a tight radius allowing for
more expressive detailing.
Euro-Tray Roll Cap
A New Zealand inspired design and the most popular profile of the Euro-
Tray family, Euro-Tray Roll Cap offers clean lines and a uniquely robust and
distinctive look. Visualise the traditional timber board and batten look and then
imagine this in metal and you have Roll Cap.
Euro-Tray Angle Seam
This member of the Euro-Tray family is not only a striking roofing profile, but
also an exceptional wall cladding. In cladding situations, Angle Seam can be
run both vertically or horizontally. Angle Seam can also be concave curved.
Calder Stewart Roofing’s new and improved roof cladding profile, Heritage Tray
represents the evolution of its already popular Euro-Tray product line, with a
new emphasis on economy and flexibility. Conceived around the market leading
stylishness of its predecessor, Heritage Tray has the advantage of requiring no
additional plywood substrate, thus reducing costs. Additionally, Heritage Tray
offers the flexibility of being roll formed on-site, an ideal solution where extra-long
trays are required, storage is limited or potential transport damage needs to be
eliminated. Heritage Tray comes with a cost saving custom flashing solution for
eaves and retains its warranty if you later decide to install a solar PV Laminate.
Affordable quality.
Heritage Tray™
Calder Stewart Roofing’s unique Euro-Panel wall cladding is an extension of
their already popular Euro-Tray roofing. Euro-Panel is a sleek, sectional panel
system that clips together to form a stylish finish like no other. Tested, like all
Calder Stewart Roofing products, in the deep south Euro-Panel can now be seen
up and down the country. On everything from architecturally-designed homes to
commercial buildings. Whether it is modern or rustic, zinc or copper, Euro-Panel will
compliment any design with a timeless, yet stand-out look.
Make a statement.
Euro-Panel®
Back in 1955 Calder Stewart started out building dog kennels and hay barns for
the rural communities of Southland & Otago. An honest, reliable service and great
products meant the demand grew to a point where it made sense to purchase
a corrugate roofing machine. 1970 saw the beginnings of the Calder Stewart
Industries roofing division, providing cut-to-length corrugated iron for farm
buildings and the general public. Corrugated iron to this day is the cornerstone
of the roofing division and one of New Zealand’s most trusted roofing profiles.
Whether it’s a barn, a sleep out or your dream home, Calder Stewart’s corrugated
iron profile has stood the test of time and will look great year after year.
Tried and true original.
Corrugate
When Hannibal Hayes, owner of Heliworks, specified roofing for his new heliport in
Queenstown, he chose Calder Stewart Hi Five roofing. He knows the rotor wash
from a helicopter can kick up all sorts of bits and pieces and our Hi Five roofing
profile has the wherewithal to stand up to it all. Supporting wide purlin spacing
and performing well on low pitch roofs, Hi Five is ideally suited for all cladding
applications down to 3 degrees. It can additionally be crimp curved, offering unique
architectural design possibilities.
A rugged performer.
Hi Five
Fonterra’s expansive Darfield complex didn’t just need “big”. It needed “Mega”.
Calder Stewart’s Mega 5 profile is being used for the roof and walls of the
massive state of the art 54,000m2 drystore building and inwards good unit.
Mega 5 roof and wall cladding are specialist commercial grade, high-rib, high
span profiles developed for large-scale buildings. They not only offer clean lines
but superior, cost-efficient coverage. Extraordinary strength allows for wide
purlin spacing of up to four metres. Mega 5’s superior interlocking design also
features a triple chamber anti-capillary to prevent wind blown water entering the
roof, protecting precious stocks and machinery.
When only Mega will do.
Mega 5
When Calder Stewart Industries were designing their massive 8300m2 Pre-Cast
plant, the largest in the South Island, cladding was no small decision. They
chose a profile for the roof and walls with the strength and finish to complement
this first class building. Calder Stewart Roofing’s V8/V6 dual profile range was
selected for its clean lines, proven track record and performance. V8/V6 has
the horsepower to tackle a massive range of applications both commercial
& residential, and has been used throughout New Zealand since it was
launched in 2005. When run from a narrower coil, V6 is an ideal profile for
smaller applications like carports and general shelters.
Proven track record.
V8/V6
No good roof is complete without an equally as good rainwater system.
Calder Stewart have an extensive range of fascia, gutter, down pipe and
rainwater heads to suit any style of home. It doesn’t matter if you’re building
an architectural dream home, a bach by the sea or renovating an existing
house our wide range of products will ensure your project looks the part.
We’ve got an extensive range and are also very familiar with making custom
products/one off designs for projects that require something out of the ordinary.
Complete the look.
Rainwater Goods
Our noise controller.
When Parker Warburton were designing the award-winning Hunter Centre,
(an innovative learning hub for the University of Otago based around a
central atrium), there were a number of design and audio issues. Calder
Stewart Roofing’s Audio-Perf was chosen to help modulate the acoustics
in the potentially noisy and challenging communal space. A sleek finish and
excellent acoustic performance achieved exactly what the University needed.
Where fixed in accordance with installation instructions the system provides
both acoustic and fire performance. It is the ideal choice for school buildings,
including pools and gymnasiums or large retail/office spaces.
Audio Perf®
A warranty that means somethingCalder Stewart has been in construction for over 55 years. We have a solid
reputation and stand behind our products.
Our coils come from Pacific Coilcoaters, a Fletcher Building company, adding
further security to your investment. If there is any issue with your roof, you know
there is peace of mind the company behind it will support you till it’s right. And we
don’t often get it wrong.
A nationwide network of trained roof installersCalder Stewarts’ installers are highly trained. Our products are quality and
they’re matched by artisan: Roofingsmiths, ensuring a perfect finish.
From Cape Reinga to Bluff, if you need a good looking roof, we’re there
to install it.
Call usIf you would like more information or to talk to us – no problem. We’re also
more than happy to assist if you’d like an onsite consultation, or want us to
chat with your architect, project manager or group home builder.
Call us anytime on 0800 115 232 or go to www.roofer.co.nz
Euro-Panel Profile Hook Seam (max. length 1200mm)
Euro-Panel Profile Lock Seam (max. length 1200mm)
Cavity Batten
12mm plywood (minimum)
Building paper
Fixing clip 0.55mm
NOTE:Metal sheet thickness andsize may vary according toamount of oil-canning thatis acceptable
HOOK SEAM
Cavity Batten
12mm plywood (minimum)
Building paper
Fixing clip 0.55mm
Available in copper and zinc onlyStandard material thickness is 0.7mm
LOCK SEAM MAXIMUM LENGTH 1200mm
IMPORTANT NOTEThis is a verification method E2/VM1tested detail designed by Calder StewartRoofing and is only to be installed byCalder Stewart Roofing or CalderStewart Roofing Approved Personnel.
Cavity Batten
12mm plywood (minimum)
Building paper
Fixing clip 0.55mm
NOTE:Metal sheet thickness andsize may vary according toamount of oil-canning thatis acceptable
HOOK SEAM
Cavity Batten
12mm plywood (minimum)
Building paper
Fixing clip 0.55mm
Available in copper and zinc onlyStandard material thickness is 0.7mm
LOCK SEAM MAXIMUM LENGTH 1200mm
IMPORTANT NOTEThis is a verification method E2/VM1tested detail designed by Calder StewartRoofing and is only to be installed byCalder Stewart Roofing or CalderStewart Roofing Approved Personnel.
1/2 Round Spouting Profile
Quad Spouting Profile
Klassic Spouting Profile
Hi Line Spouting Profile
Our roofing profiles.*
Euro-Tray Roll Cap Cross Sectional Profile
Euro-Tray Angle Seam Cross Sectional Profile
Euro-Tray Roll Seam Cross Sectional Profile
Euro-Tray Double Standing Seam Cross Sectional Profile
515 Standard (Variable Widths Available)
12
32
565 Standard (Variable Widths Available)
49
32
565 Standard (Variable Widths Available)
4932
515 Standard (Variable Widths Available)
7
32
13
Mega 5 Cross Sectional Profile
Heritage Tray Cross Sectional Profile
Solar-Rib Cross Sectional Profile
51
906 Effective cover
991 Sheet cover
101 126 35226
1,015 Effective cover
1,098 Sheet cover
51
56º400507
100
V8 Cross Sectional Profile
V6 Cross Sectional Profile
Corrugate Cross Sectional Profile
Hi Five Cross Sectional Profile
37
57 70 20 127889 Effective cover
942 - Sheet width
27
60 25 131 191
765 Effective cover
822 - Sheet width
19
76
760 Effective cover
820 - Sheet width
37
2057 70 127623 Effective cover
725 - Sheet width
* Profile dimensions are nominal.
Calder Stewart Construction has built a solid name for itself in the specialist
commercial, industrial, agricultural and public-sector construction markets.
We have continued to focus on the core values we uphold; namely to
‘build it the right way’.
The use of structural steel has played a central role in the company’s overall
growth and building practices. The Calder Stewart Steel Division has one
of the largest most state-of-the-art fabrication plants in New Zealand.
We are renowned for finding ways to streamline steel detailing, pricing
and final fabrication.
Calder Stewart Pre-Cast facility is the largest in the South Island. It produces
a full variety of precast concrete products including in-plant and on-site
casting as well as textured, patterned and exposed aggregate finishing.
Combined with its extensive distribution network, Calder Stewart Pre-Cast
can provide superior high-quality, high-volume deliverables to any precast
construction project nationwide.
Calder Stewart Development builds on a tradition of entrepreneurial excellence,
having acquired an extensive range of premium land locations throughout the
South Island. We offer full design and build services with flexible options: purchase
or lease, including full turnkey solutions. Our team works with clients throughout the
planning and development process to ensure that the end result meets their needs.
Calder Stewart Forestry, has operated under the premise that cooperating
with nature has benefits. While planting trees is a business investment, being
environmentally responsible aligns with our ethos and principles: Be responsible
and do it right. Today we grow a number of Radiata Pine, Douglas Fir and
Macracarpa plantations with more mature forests now being harvested.
Controlling costs and operating efficiently are essential to remaining competitive in
the evolving building industry. That is why since its beginning, Calder Stewart has
made key investments in transport, maintaining its own fleet of vehicles. Today
Calder Stewart Distribution manages a number of heavy-duty tractor trailer trucks.
Calder Stewart’s ReoXpress Division supplies made to order pre-cut and
pre bent steel reinforcing. Central to its task is the ability to be flexible and
responsive. To this end, it has invested in industry-leading programmable
fabrication equipment and developed its own material handling strategies.
Calder Stewart’s other divisions.
Construction
Development
Forestry
Distribution
Steel
Pre-Cast
The Calder Stewart Roofing product range isn’t your typical line of roof
products. Many of them are architectural tray products, so we can’t just have
your typical roofer install them. We have chosen nationwide installers: only the
best in each region as our certified Roofingsmiths.
Having a network means no matter where you build, we can install your roof.
It also fosters excellence among the group and encourages a deep talent
pool with the knowledge to tackle any project big or small. This ensures the
workmanship is equal to that of the product.
To find your local installers visit us
at roofingsmiths.co.nz or call
0800 115 232 to speak with us.