Upload
eshana
View
132
Download
0
Tags:
Embed Size (px)
DESCRIPTION
Updating the Maps Step 2 Eclipse AVN726E / AVN76D. www.eclipse-web.com. Updating the Eclipse Map Data. Select Support > Map Updates. Select AVN726E / AVN76D Detail. Updating the Maps Step 2 Eclipse AVN726E / AVN76D. Download two software programs to your PC Sync Tool - PowerPoint PPT Presentation
Citation preview
Updating the MapsStep 2
Eclipse AVN726E / AVN76D
www.eclipse-web.com
Updating the Eclipse Map Data
• Select Support > Map Updates
• Select AVN726E / AVN76D Detail
Updating the MapsStep 2
Eclipse AVN726E / AVN76D
Download two software programs to your PC
1. Sync Tool
Software for the SD Card to transfer files back & forth between your Device and PC
2. ToolBox
For your PC to manage the data
Step 1 Update is required before proceeding to Step 2
Scroll to the Step 2 Page
A minimum of 2 GB SD Card is required
Larger SDHC Cards are compatible but may require additional steps if you exceed the on-board memory capacity of the AVN (1.8GB) If necessary, see “How To Transfer Contents” in the FAQ Section at www.naviextras.com
• Scroll down to Step 2
NaviExtras Map Update
Software for SD Card & PC
1. Download NaviExtras SyncTool Software
• UnZip File
• Copy “Update” folder to a blank SD Card
2. Download NaviExtras ToolBox Software
• Install ToolBox Software on to your PC
• Download Sync Tool to PC Desktop – Unzip and transfer Updates Folder to blank SD Card.
• Download Toolbox Software to PC
Download SyncTool
Download SyncTool
• Unzip the Sync Tool File and Copy the “Updates” Folder to the blank SD Card
Download SyncTool
Summary
• Insert the SD Card with the Updates Folder into the AVN
• Collect Device Information from the AVN
• Return to PC & proceed to ToolBox Software
Collecting Device Information
• Press Eject • Press Open• Place the SD Card into the device• Press Close
Collecting Device Information
Collecting Device Information
• On the Navi Screen Press “Menu”• Press “Settings”
• Press the Arrow to advance to Page 2
Collecting Device Information
• Press “About”
Collecting Device Information
• Press “Update”
Collecting Device Information
Collecting Device Information
• Press “Collect device information”
• Press “YES”
Collecting Device Information
• Upon completion, Press “OK”
Collecting Device InformationIMPORTANT !Do not interrupt power during the collection processThis process requires less than 15 minutes to completePlease Note: Vehicle must be running or ACC ON without interruption
• Press “Quit”
Collecting Device Information
• Press “Yes”
Collecting Device Information
• Remove the SD Card• Press “Continue”
– The AVN will Reboot • Turn off the vehicle and return to the PC for Updating
Collecting Device Information
Download Toolbox
ToolBox
Summary
• Close all other programs and download ToolBox Software on PC
• Install and Open the ToolBox Software
Open ToolBox
• ToolBox requires an internet connection to communicate to the Naviextra’s Update Server
Registering Device on the update server
• With the data collected, place the SD Card back into the PC • Toolbox will recognize this as a “Device” and register with the
update server• Toolbox will then show “Device Connected”
• The My Updates tab will show available updates for your device
• Select My Updates
• Select “Install”
• Select “Yes” to create a back up of your current data before installing new content
• The backup file name will be titled with the date or you can change the name for familiarity
• The Back Up Process will take approximately 10 Minutes and will indicate progress and the time remaining
• Once BU is complete press “Next”
• If present, uncheck Fix for Navigation• Confirm that Latest Map Guarantee is checked• Select Apply
IMPORTANT !
Do not to turn off or suspend the PC or interrupt the installation wizard during the download process
• Click “Apply”
• Toolbox will begin downloading updates and provide a status of the progress and the estimated time before completed. (Slow internet connections require more time)
Download speed will vary depending on your internet connection. On average, the complete update download including POI’s is less than an hour
• Once completed, select “Done”
Summary
• Transfer the SD Card to the vehicle with the New Data
• Restore Device Information
• Remove the SD Card
Updating the AVN
• Press Eject • Press Open• Place the SD Card into the device
Updating the AVN
Updating the AVN
• On the Navi Screen Press “Menu”• Press “Settings”
• Press the Arrow to advance to Page 2
Updating the AVN
• Press “About”
Updating the AVN
• Press “Update”
Updating the AVN
• Press “Restoring to the device”
Updating the AVN
• Upon completion, Press “OK”
Updating the AVNIMPORTANT !Do not interrupt power during this processThis process requires about 10-15 minutes
• Press “Quit”
Updating the AVN
• Press “Yes”
Updating the AVN
• Press Eject and Remove the SD Card
• Press “Continue”– The AVN will Reboot
• You have completed the Map Update Process
Updating the AVN
Confirm the New Maps
• On the Navi Screen Press “Menu”• Press “Settings”
• Press the Arrow to advance to Page 2
Confirm the New Maps
• Press “About”
Confirm the New Maps
• Press “Maps”
Confirm the New Maps
Confirm the New Maps
• You will recognize the newer map dates• Select Licenses for additional information
Please Visit www.eclipse.naviextras.com/shop/portal/support for additional support and
FAQ
Updating the MapsStep 2
Eclipse AVN726E / AVN76D