Uploading a config file to a SMC2890W-AG To test if the procedure to upload a config file to the SMC2890W-AG is working we do the following:

1) We change the SSID for the Radio G to “Juan_Changes” and export the file thru the EliteView TFTP :

This will be the file to import later.

2) Then we change the SSID again to Juan and save changes:

SMC Enterprise AP/Bridge#sh interface wireless g 0 Wireless Interface Information ========================================================================= ----------------Identification------------------------------------------- Description : SMC Enterprise 802.11g AP/Bridge SSID : Juan Turbo Mode : DISABLED Channel : 5 Status : ENABLED

MAC Address : 00:13:f7:a2:12:8b ----------------802.11 Parameters---------------------------------------- Radio Mode : b & g mixed mode Protection Method : CTS only Transmit Power : FULL (12 dBm) Max Station Data Rate : 54Mbps Multicast Data Rate : 5.5Mbps Fragmentation Threshold : 2346 bytes RTS Threshold : 2347 bytes Beacon Interval : 100 TUs Authentication Timeout Interval : 60 Mins Association Timeout Interval : 30 Mins DTIM Interval : 1 beacon Preamble Length : SHORT-OR-LONG Maximum Association : 64 stations MIC Mode : Software Super G : Disabled VLAN ID : 1 ----------------Security-------------------------------------------------

3) We use now the import tool via web:

To import the file we do the same procedure than always. The TFTP server is our own machine:

4) The configuration saves correctly:

5) And the outcome from the TFTP server is ok as well:

6) We unplug and plug the SMC2891W-AG from the electricity. 7) We test if the configuration has changed:

The configuration is correctly uploaded: SMC Enterprise AP/Bridge#sh interface wireless g 0 Wireless Interface Information ========================================================================= ----------------Identification------------------------------------------- Description : SMC Enterprise 802.11g AP/Bridge SSID : Juan_Changes Turbo Mode : DISABLED Channel : 5 Status : ENABLED MAC Address : 00:13:f7:a2:12:8b ----------------802.11 Parameters---------------------------------------- Radio Mode : b & g mixed mode Protection Method : CTS only Transmit Power : FULL (12 dBm) Max Station Data Rate : 54Mbps Multicast Data Rate : 5.5Mbps Fragmentation Threshold : 2346 bytes RTS Threshold : 2347 bytes Beacon Interval : 100 TUs Authentication Timeout Interval : 60 Mins Association Timeout Interval : 30 Mins DTIM Interval : 1 beacon Preamble Length : SHORT-OR-LONG Maximum Association : 64 stations MIC Mode : Software Super G : Disabled VLAN ID : 1 ----------------Security-------------------------------------------------