UPSHINE UP-DB18-1300-40W PC Diffuser LED …...Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 40W Ⅱ IP66 -20oC~45oC 0~90% -20oC~65oC Driver data

Technical ApplicationGuide for UP-SHINELED Batten LightUP-DB18-1300-40W

DB18 is a high quality LED batten with high luminous efficacy 115lm/w. With a reliable and robust housing structure (IK10 & IP66), this maximizes the endurance and contributes to its long lifetime. With its flexible installation accessories, it can be used in a wide variety of applications. Three size in length (700mm 1300mm 1600mm), and various lumens package, let it to be ideal replacement for traditional fluorescent batten.

Introduction

www.upshine.com [email protected]

Features 1. LED batten light IP66, compact design and suitable for both indoor and outdoor applications. 2. Input voltage: 100Vac -277Vac, suitable for all the markets. 3. Elegant outlook with rearwards-directed light to illuminate the ceiling. 5. Colour rendering index (CRI): Ra > 80 6. Impact protection: IK10 7. LED service life: approx. 50,000 hours @L80/B10 25°C. 8. End caps: made of shockproof polycarbonate (PC). 9. Extruded PC opal diffuser with inner prisms and UV resistant, providing homogenous light distribution.10. Flexible installation through sliding mounting bracket. Ideal for luminaire replacement.11. Providing through-wiring for further luminaires (safety class II) connection.12. Tool free mains cable installation on both sides through twist lock fastener cover at both sides.

Application notes•IP66 for indoor and outdoor use•The lamp must be installed by professional

electrician•Ensure the power supply is switched off before

fitting this product•Do not touch the lamp when in use•Keep away from hot steam and corrosive gas

ApplicationsCar parks, warehouses, workshops, underground areas.

Certificate

SAA

Fixture CompatibilityRated

WattageElectrical

ClassificationIngress

ProtectionOperating

TempOperatingHumidity

Storage Temp

40W Ⅱ IP66 -20oC~45oC 0~90% -20oC~65oC

Driver data Main Power

Input rated Voltage AC100-277V

Frequency 50/60Hz

Input Voltage AC90-305V

Efficiency ≥86%

Total load Wattage 40W±5%

Power Factor ≥0.9

Rated input current ≤0.45A

Full load output Voltage DC65-75V

Rated output current 260mA*2

Output current range (260mA*2)±5%

Power tolerance ±5%

Current output tolerance ±5%

Short circuit protection PASS

Over voltage protection PASS

Over temperature protection PASS

THD ≤20%

Withstand voltage —

Technical Specifications

Model Voltage Power PowerFactor

Lumen(±5%)

Beamangle CCT Lifespan CRI Dimmable Dimension

UP-DB18-1300-40W AC100-277V 40W ≥0.9 4200 140o 3000K 50000h ≥80 No 1300*78*53.5mm




Driver data Sheet


53.5

78

1300

Product Information

Photometric Diagram

Spectral Distribution

Polar intensity diagram

Polar intensity diagram Polar intensity diagram

Polar intensity diagramBeam diagram

Beam diagram Beam diagram

Beam diagramCartesian intensity diagram

Cartesian intensity diagram Cartesian intensity diagram

Cartesian intensity diagram

UNIT: cdAVERAGE BEAM ANGLE(50%): 131.8 DEG

-/+180

-120

-90

-30

120

90

30

0

180

360

540

720

900

0


-/+180

-120

-90

-30

120

90

30

0

200

400

600

800

1000

0


-/+180

-120

-90

-30

120

90

30

0

200

400

600

800

1000

0


-/+180

-120

-90

-30

120

90

30

0

200

400

600

800

1000

0

Planar Illuminance Curve

Distance(m)

MH=10mE(LX)9.0

8.1

7.2

6.3

5.4

4.5

3.6

2.7

1.8

0.9

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25


Distance(m)

MH=10mE(LX)10

9

8

7

6

5

4

3

2

1

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25


Distance(m)

MH=10mE(LX)10

9

8

7

6

5

4

3

2

1

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25


Distance(m)

MH=10mE(LX)10

9

8

7

6

5

4

3

2

1

0

C0/180C90/270

-25 -20 -15 -10 -5 0 5 10 15 20 25Height Eavg, Emax Angle: 111.11deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

Flux out: 1905 lm

Height Eavg, Emax Angle: 110.98deg DiameterNote: The Curves indicate the illuminated area and the average illumination when the Luminaire is at different distance.

Flux out: 2128 lm


Flux out: 2079 lm


Flux out: 2117 lm

380 500 600 700 800 380 500 600 700 800

380 500 600 700 800380 500 600 700 800

Wavelength(nm) Wavelength(nm)

Wavelength(nm)Wavelength(nm)

Max=7698 [1.0=20000] Max=7530 [1.0=20000]

Max=5808 [1.0=20000]Max=9472 [1.0=20000] 1.25 SDCM F5000K

x=0.3483 y=0.3619

Spec

trum

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

Spec

trum

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

Spec

trum

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

Spec

trum

0.8

0.7

0.6

0.5

0.4

0.3

0.2

0.1

0.0

0.37 SDCM F4000K

x=0.3801 y=0.3808

5700K

4000K3000K

5000K 5700K

3000K 4000K

5000K


5.49 SDCM F5700K

x=0.3234 y=0.3444

3.10 SDCM F3000K

x=0.4427 y=0.3996

Polar Diagram Comparison

AVERAGE BEAM ANGLE (50%): 132.2DEG

UNIT: cd

C0/180, 159.2 deg

C30/210, 140.8 deg

C60/240, 118.1 deg

C90/270, 110.7 deg

200

400

600

800

1000

0O

180O

150O-150O

120O-120O

90O-90O

60O-60O

30O-30O

0

Tem

pera

ture

(o C)

The driver lifespan is based on capacitor working temperature.

IC

Capacitor

MOS

PCB

LED

Fitting

Environmental temperature

90

80

70

60

50

40

30

20

10

0

11:1

3:13

11:3

1:10

11:4

9:10

12:0

7:10

12:2

5:10

12:4

3:10

13:0

1:10

13:1

9:10

13:3

7:10

13:5

5:10

14:1

3:10

14:3

1:10

14:4

9:10

15:0

7:10

15:4

3:10

16:0

1:10

16:1

9:10

16:3

7:10

Time

Driver lifetime & LED light decay rate

90000

80000

70000

60000

50000

40000

30000

20000

10000

065oC 75oC 85oC 95oC 105oC

Life

time

(hou

rs)

Capacitor Tc (oC)

Driver Lifetime LED Light Decay Rate

% L

umin

ous

Flux

FLUX

△ U'V'

110%

105%

100%

95%

90%

85%

80%

75%

70%

0.0040

0.0035

0.0030

0.0025

0.0020

0.0015

0.0010

0.0005

0.00000 1000 2000 3000 4000 5000 6000 7000 8000 9000 10000

LifeTime (hours)

Temperature● The testing is operated at 25°C

● The lifetime of capacitor, minimum of 5,000 hours if operated at 105°C, will be doubled whenever the temperature drops 10°C

● The highest withstand temperature of IC, MOS could be 120°C

● The highest withstand temperature of LED junction temperature is 150°C


Installation 1

Installation 2


Step1 Step2

L

N

Step3

BLUE

BROWNL =

N =

Step4

Step1 Step2

Put the LED batten back until it is stuck by clips.

Knock 2pcs plastic anchors into ceiling. Fastening the clips on the ceiling.

Open the end cap, put the wires through the hole, connect the terminal block (Brown to L, Blue to N), tighten the end cap to prevent the water into the lamp.

Knock 2pcs plastic anchors into ceiling, fix the wire regulating device on ceiling.

Put the hook through metal plate, embed the metal plate in the slot of the lamp body.

100-130V12 26UP-DB18-1300-40W

200-277VLinkable luminaries Qty

ART-NR

Packaging Information

SIZE(CM) N.W/pc(KGS) G.W.(KGS) Q'TY(PCS)

Carton 151.5*29.5*19.5 0.8 8 8

CTNS Q'TY(PCS) VOLUME(CBM)

20'' standardcontainer 316 2528 28

40'' standardcontainer 634 5072 56

www.upshine.com [email protected] Phone: +86 755 2919 7389Add: 2nd building Dingfeng High-Tech Zone, Fuyuan 1st road, Fu Yong Sub-district, Bao'an, Shenzhen China

Step3

L

N

Step4

BLUE

BROWNL =

N =

Adjust the length of suspending wires on same level, turn on the light.

Hanging the lamp to the suspending wires.

Open the end cap, put the wires through the hole, connect the terminal block (Brown to L, Blue to N), tighten the end cap to prevent the water into the lamp.

Documents

UPSHINE UP-DB18-1300-40W PC Diffuser LED …...Classification Ingress Protection Operating Temp Operating Humidity Storage Temp 40W Ⅱ IP66 -20oC~45oC 0~90% -20oC~65oC Driver data