5340MIN 5000 MID 8000,11000 MAX 14000

310

1989

545

654

(2447) (2566)

(695)

Stroke605

Truck Frame

583

Rotation Center

Mounting CenterMounting Center

32

73435 435

Max.5700Min.2260

2460

300

300

490

Stroke1720

Stroke1720

Max.5700Min.2260

Stroke1720

Stroke1720

Slewing Center

32

73435 435

300

300

490 2460

5664MIN 5000 MID 8000,11000 MAX 14000

310

1989

633

654

(2447) (2592) (2566)

(695)

Stroke605

471

Truck Frame

Crane Mounting Dimensions

Specifications Table

(Unit: mm)

NOTE

HOOK＋

SLINGS＋

LOAD

=

RATED LOAD

Buildings, walls, whatever, with UNIC wire-rope cranes you get precise high-lift placement and safe, sure operation. Their dependability is all in their strength and design, original UNIC features.

Higher performance, too, at lower depths. UNIC wire-rope cranes handle heavy loads in deep-hole jobs with accuracy and stability. A wide range of models assures versatile matching to job requirements.

Tight places are the right places for UNIC wire-rope cranes. In any operating situation their strong steel cables mean extra dependability and safety. High, low, or tight, UNIC wire-rope cranes are always right.

Operational advantages...High or low tight, UNIC straight-boom wire-rope cranes match the task. They're great high-lift performers, Lifting loads over walls is also no problem with their unrestricted raising and lowering. In deep-hole jobs they're strong, and accurate. Many extra safety features, too.

1. Rated loads shown in the chart are based on the crane strength with the outriggers fully extended on a film level ground and on the actual working radius including the deflection of boom.

2. The weights of hook (100 kg.), slings, and any accessories attached to the boom or loadline must be deducted from the above capacities in the chart.

3. Capacities shown must reduce in accordance with vehicle weight and loaded condition of truck, crane mounting position,and operating speed.

4. The figures in relation to the speed are on the basis of no-load running at rated oil flow conditions.

5. In accordance with our policy of constant product improvement, all specifications are subject to change without notice or obligations.

Authorized distributor

Printed in Japan C-1977（2018.03.03.MO.）

5-3, Nihonbashi 1-chome, Chuo-ku, TOKYO 103-0027 JAPANPhone: (81-3) 3231-8613 / Facsimile: (81-3) 3231-8261http://www.uniccrane-global.com/

URV1004

10,100kg×2.5m

15.6m

Min. 0.95m～Max. 13.69m

Min. 5.0m～Max. 14.0m

4

Min. -0.6˚～Max. 78˚

360˚

Crane Model

Maximum Lifting Capacity

Maximum Hook Height

Working Radius

Boom Length

Boom Sections

Boom Raising Angle

Slewing Angle (Continuous)

For Heavy-Duty truck

Maximum Lifting Capacity

10100 kg

《URV1004-CNCTS》 《URV1004-CNCT》

Truck-Mounted UNIC Crane

URV1004-CNCTSeries

Select Control Type

Standard Equipments

1

2

3

4

0 1 2 3 4 5 6 7 8 9 10 11 1312 (m)

20 1 3 4 5 6 7 8 9 10 11 12 (13.69)(0.95)

(15.6)

3456789

1011121314

210

78˚70˚

60˚50˚

40˚

30˚

20˚

10˚

0˚

1 3 42

0.95～2.5 2.7 3.0 3.5 4.0 4.5 5.0 5.5 6.0 7.0 8.0 9.0 10.0 11.0 12.0 13.69

10100

6600

9100

6600

8400

6600

5300

4100

7250

6000

5300

4100

6350

5300

4600

4100

4700

4100

4100

4300

3700

3700

3850

3400

3400

3600

3100

3100

3100

2700

2700

2300

2300

2000

2000

1800

1800 1600 1300 1000

5300（4.69m）2700（7.69m）

1600（10.69m）

Working Radius

Hei

ght A

bove

Gro

und

Working Range (m)

UNIC Crane ̶ , High safety and reliability.

Working Radius (m)

Rated Loads (kg)

URV1004 4 Section Boom

Maximum Working Radius 13.69m

Automatic Hook Stow SystemHook can be automatically retracted to stow position and released for lifting operation.

Anti Two-Block SystemA limiting device to prevent the hook from contacting the upper sheaves.

Interlock System for SlewingSlew motor is hydralically interlocked when in no use to prevent the crane from swinging when the truck is traveling.

Top Seat-Control Version《URV1004-CNCTS》

Base-Control Version《URV1004-CNCT》

Outrigger Control from Base Derrick Cylinder Pressure Alert System

Oil Cooler(with Thermostat)

Maximum Lifting Capacity 10100kg

Maximum Hook Height 15.6m

Maximum Working Radius 13.69m

Main Outrigger Max.(Hydraulic Extended) 5700mm

Rear Outrigger Max.(Hydraulic Extended) 3200mm

Wide Horizontal Extension

It alerts excessive overload and stop the crane to minimize the crane structural damage. (It does not warrant that this device protects the crane itself from the overload.)

O N : 70℃OFF : 50℃

NOTE:Top Seat-Control Version

Stow Position

5340MIN 5000 MID 8000,11000 MAX 14000

310

1989

545

654

(2447) (2566)

(695)

Stroke605

Truck Frame

583

Rotation Center

Mounting CenterMounting Center

32

73435 435

Max.5700Min.2260

2460

300

300

490

Stroke1720

Stroke1720

Max.5700Min.2260

Stroke1720

Stroke1720

Slewing Center

32

73435 435

300

300

490 2460

5664MIN 5000 MID 8000,11000 MAX 14000

310

1989

633

654

(2447) (2592) (2566)

(695)

Stroke605

471

Truck Frame

Crane Mounting Dimensions

Specifications Table

(Unit: mm)

NOTE

HOOK＋

SLINGS＋

LOAD=

RATED LOAD

Buildings, walls, whatever, with UNIC wire-rope cranes you get precise high-lift placement and safe, sure operation. Their dependability is all in their strength and design, original UNIC features.

Higher performance, too, at lower depths. UNIC wire-rope cranes handle heavy loads in deep-hole jobs with accuracy and stability. A wide range of models assures versatile matching to job requirements.

Tight places are the right places for UNIC wire-rope cranes. In any operating situation their strong steel cables mean extra dependability and safety. High, low, or tight, UNIC wire-rope cranes are always right.

Operational advantages...High or low tight, UNIC straight-boom wire-rope cranes match the task. They're great high-lift performers, Lifting loads over walls is also no problem with their unrestricted raising and lowering. In deep-hole jobs they're strong, and accurate. Many extra safety features, too.

1. Rated loads shown in the chart are based on the crane strength with the outriggers fully extended on a film level ground and on the actual working radius including the deflection of boom.

2. The weights of hook (100 kg.), slings, and any accessories attached to the boom or loadline must be deducted from the above capacities in the chart.

3. Capacities shown must reduce in accordance with vehicle weight and loaded condition of truck, crane mounting position,and operating speed.

4. The figures in relation to the speed are on the basis of no-load running at rated oil flow conditions.

5. In accordance with our policy of constant product improvement, all specifications are subject to change without notice or obligations.

Authorized distributor

Printed in Japan C-1977（2018.03.03.MO.）

5-3, Nihonbashi 1-chome, Chuo-ku, TOKYO 103-0027 JAPANPhone: (81-3) 3231-8613 / Facsimile: (81-3) 3231-8261http://www.uniccrane-global.com/

URV1004

10,100kg×2.5m

15.6m

Min. 0.95m～Max. 13.69m

Min. 5.0m～Max. 14.0m

4

Min. -0.6˚～Max. 78˚

360˚

Crane Model

Maximum Lifting Capacity

Maximum Hook Height

Working Radius

Boom Length

Boom Sections

Boom Raising Angle

Slewing Angle (Continuous)

For Heavy-Duty truck

Maximum Lifting Capacity

10100 kg

《URV1004-CNCTS》 《URV1004-CNCT》

Truck-Mounted UNIC Crane

URV1004-CNCTSeries