Extend and switch USB peripherals between multiple locations

A Extends USB peripherals up to 1,980 feet (600 meters) through a Gigabit Ethernet network

A Extends USB peripherals up to 330 feet (100 meters) point-to-point over one CATx cable

A Supports USB 2.0/1.0 devices with data rates up to 480 Mbps

A Choice of rack-mountable and architectural form factors

A USB switching controller lets you easily create USB switching systems

USB Extender Plus Series

USB

TWISTED PAIR EXTENDER FOR USB PERIPHERALS

Introduction

The USB Extender Plus Series extends and switches USB signals

from peripheral devices to a host computer up to 1,980 feet

(600 meters) through a Gigabit Ethernet network or up to 330 feet

(100 meters) point-to-point over one CATx cable. It supports

USB 2.0/1.0 devices with data rates up to 480 Mbps and it is

compatible with USB 3.0 devices that can operate at USB 2.0 data

rates. The transmitter includes USB peripheral emulation to enable

booting a host computer that is not connected to a keyboard or

mouse. To simplify device integration, the receiver features a built-in,

active four-port hub. The controller provides simple setup and control

for creating a distributed USB matrix switching system over a Gigabit

Ethernet network. Available in various form factors, the USB Extender

Plus Series supports USB peripherals such as keyboards, mice,

mass storage devices, and webcams in pro AV environments.

The USB Extender Plus Series is capable of transmitting USB signals

long distances over a CATx twisted pair infrastructure. For distances

up to 330 feet (100 meters), installation of the USB Extender Plus

enables direct connection of USB peripherals to the remote host

computer without needing additional IP network drops, equipment,

software, or drivers.

Where longer distances are required or when pairing one transmitter

to multiple receivers, the USB Extender Plus Series transmitter and

receiver can be connected to a Gigabit Ethernet switch located up to

330 feet (100 meters) away to extend the total distance to 660 feet

(200 meters). The signal can be extended through a network of up

to five Gigabit Ethernet switches, for a total transmission distance of

1,980 feet (600 meters).

Transmitters and receivers are available in three form factors that

can be mixed and matched for optimum integration flexibility. The

compact, 1-inch quarter rack width metal enclosure is designed for

desktop, under desk, lectern, or rack mounting. The USB Extender

Plus AAP model provides convenient and elegant architectural USB

connectivity. The USB Extender Plus D is a decorator-style wallplate

that fits into a single-gang wall box.

The USB Plus Matrix Controller provides a simple management

interface to create USB switching systems using up to 64 USB

Extender Plus Series transmitters and receivers. Any AV control

processor can easily control USB switching using SIS commands

sent via Ethernet or RS-232. The system can be configured quickly

and easily using Extron's Product Configuration Software - PCS.

Extends USB peripherals up to 1,980 feet (600 meters) through a Gigabit Ethernet network

Extends USB peripherals over one CATx cable point-to-point up to 330 feet (100 meters)

Supports USB 2.0/1.0 devices with data rates up to 480 Mbps. Compatible with USB 3.0 devices that can operate at USB 2.0 data rates Enables bulk, control, interrupt, and isochronous transfers as defined by the USB specification.

Receiver features an integrated four-port hub with 5 Volts, 500 mA available on each port Allows simultaneous connection to multiple peripheral devices such as the Extron Annotator 300, mass storage devices, keyboards, mice, or other HID – Human Interface Devices.

One transmitter can connect to four receiversUsing a Gigabit Ethernet switch, one transmitter can support up to four receivers via an IP network.

Peripheral emulation Offers increased system reliability by emulating a connection between the host and an HID-compliant keyboard and mouse.

Real-time status LED indicators for troubleshooting and monitoring Provides visual confirmation of port activity between an active host and each connected peripheral device.

Choice of rack-mountable and architectural form factors Available in a compact, 1-inch rack-mountable metal enclosure, an AAP - Architectural Adapter Plate, and a single-gang decorator-style wallplate for easy integration into a variety of environments.

USB switching controller lets you easily create USB switching systemsOne controller can manage a switcher configuration of up to 64 USB Extender Plus Series transmitters and receivers. Enables the use of serial or IP commands for integration into a control system.

Device class filtering on select models restricts the range of device types to HID and smart card readers - USB Extender Plus HIDDevice class filtering prevents unauthorized downloading or uploading of content via the USB port in secure environments. The USB Extender Plus HID is configured at the factory, such that device class filtering cannot be removed or altered in the field.

Highly reliable, energy-efficient external universal power supply included, replacement part #70-775-01 Provides worldwide power compatibility, with high demonstrated reliability and low power consumption for reduced operating costs.

FEATURES

Gigabit Ethernet Switch

50/60 Hz

100-240VAC 1.0A MAX

OVER TPSIG

OUT

LINK

REMOTEOUTPUTSINPUTS

RS-232 IR

1 1UNIVERSAL HDMI DISPLAYPORT2 3 HDMI 2A HDMI 2B

Tx Rx G Tx Rx

CONTACTLAN

RESET

USB 1

1

2

2 3

RS-232

Tx Rx GDTP

HDBT

HOST

POWER

12V1.0A MAX

INP

UT

OU

TP

UT

1

2

3

4

POWER

12V

1.0A MAX

INP

UT

OU

TP

UT

S

ExtronAnnotator 300HDCP-Compliant Annotation Processor with DTP Extension

CAT 5/5e/6/7up to 330' (100m)

CAT 5/5e/6/7up to 330' (100m)

USB TouchscreenDisplay

ExtronUSB Extender Plus TTwisted Pair Transmitter for USB Peripherals

ExtronUSB Extender Plus RTwisted Pair Receiver for USB Peripherals

Projector/Display

HDMI

USBUSB

50/60 Hz

100-240VAC 1.0A MAX

OVER TPSIG

OUT

LINK

REMOTEOUTPUTSINPUTS

RS-232 IR

1 1UNIVERSAL HDMI DISPLAYPORT2 3 HDMI 2A HDMI 2B

Tx Rx G Tx Rx

CONTACTLAN

RESET

USB 1

1

2

2 3

RS-232

Tx Rx GDTP

HDBT

HOST

POWER

12V1.0A MAX

INP

UT

OU

TP

UT

1

2

3

4

POWER

12V

1.0A MAX

INP

UT

OU

TP

UT

S

ExtronAnnotator 300HDCP-Compliant Annotation Processor with DTP Extension

CAT 5/5e/6/7up to 330' (100m)

USB TouchscreenDisplay

ExtronUSB Extender Plus TTwisted Pair Transmitter for USB Peripherals

ExtronUSB Extender Plus RTwisted Pair Receiver for USB Peripherals

Projector/Display

HDMI

USBUSB

DXP 88 HD 4K PLUSS/PDIF

1

2

AUD

IO O

UTP

UTS

OU

TPU

TS

INPU

TS

100-240V ~ --A MAX

50-60 Hz

1

5

2

6

3

7

4

8

1

5

2

6

3

7

4

8L R

REMOTE LAN

Tx Rx GRESET

GTx Rx RTS CTS

COM 1

GTx Rx

COM 2

V C G

VOL RELAYS

1 2 C

1 2 3 4 G

DIGITAL I/O

PWR OUT = 6W

eBUS

+V +S -S G

LAN

IPCP PRO 250

IR/S

S G

iPad

Help SystemOff

Display

RoomControl

Off

Mute

Screen

Lighting December 15, 2013 - 7:58 AM AudioControl

Volume

Mute

Tuner 1 2 3VCRLaptop PC DVDDocCam

TunerOn

Channel

Last

Presets

MorePresets

321

654

987

Enter0

Extron

21

43

HOST

LINK

1 2

3 4

STATUS

HUB

GTx Rx RTS CTS

COM POWER12V 0.2A MAX

LAN / PoE

MODEL 80

FLAT PANEL

WiFi 1 2 3 4

USB PLUS MATRIX

Station #6

Station #5

Gigabit Ethernet Switch

Tablet withExtron Control App

CPU

HDMI

HDMI HDMI

HDMI

Ethernet EthernetEthernet

USB

Discovery WallWorkstations (Equipment Rack)

Station #1

Station #2

Station #3

Station #4

Display #1

Display #2

Display #3

Extron IPCP Pro 250IP Link Pro Control Processor

Ethernet

Ethernet

Ethernet

ExtronUSB Extender Plus TTwisted Pair TransmitterFor USB Peripherals Extron

USB Extender Plus D RTwisted Pair Receiver for USB Peripherals

ExtronDXP 88 HD 4K PlusMatrix Switcher

USB

EthernetEthernet

ExtronUSB Plus Matrix ControllerController for USB Transmitters and Receivers

Touch Display

Applications

POINT-TO-POINTA single CATx cable connects any transmitter and receiver up to 330 feet (100 meters) apart.

NETWORKEDCATx cables connect any transmitter and receiver via a Gigabit Ethernet Network, of up to five switches, up to 1,980 feet (600 meters) apart.

SWITCHEDCATx cables connect multiple transmitters and receivers via a Gigabit Ethernet Network, of up to five switches, up to 1,980 feet (600 meters) apart, with connections between the transmitters and receivers dynamically controlled by the USB Plus Matrix Controller.

WORLDWIDE SALES OFFICES

www.extron.com

Anaheim • Rale igh • S i l icon Val ley • Dal las • New York • Washington, DC • Toronto • Mexico City • Par is • London • Frank fur t

Madr id • Stockholm • Amersfoor t • Moscow • Duba i • Johannesburg • Te l Av iv • Sydney • Melbourne

New Delh i • Banga lore • S ingapore • Seou l • Shangha i • Be i j ing • Hong Kong • Tok yo

Specifications

© 2019 Extron Electronics. All rights reserved. All trademarks mentioned are the property of their respective owners. Prices and specifications subject to change without notice.

08-201968-3136-01 REV. A1Letter - English - NP

USB EXTENDER PLUS T/R SERIES

USB host support xHCI (USB 3.0), EHCI (USB 2.0), OHCI/UHCI (USB 1.1)USB data rates Low speed (1.5 Mbps), full speed (12 Mbps), high speed

(480 Mbps)USB host — Tx unitsNumber/signal type 1 USBUSB hub — Rx units Number/signal type (1) 4-port USB hubInterconnection between transmitter and receiverConnectors 1 female RJ-45 per unitSignal transmission distancePoint to point Up to 330' (100 m)Over the network Up to 1980' (600 m)**NOTE: **Over the network distance is through connection of up to five network switches.Power supply External

Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A

Enclosure type Metal

GENERAL

Regulatory complianceSafety CE, c-UL, KCC, ULEMI/EMC CE, C-tick, FCC Class A, ICES, VCCI Class AEnvironmental Complies with the appropriate requirements of RoHS,

WEEE

USB PLUS MATRIX CONTROLLER

Ethernet controlNetwork interface controllers (NICs) 1Serial controlQuantity/type 1 bidirectional RS-232

GENERAL

Power supply External Input: 100-240 VAC, 50-60 Hz Output: 12 VDC, 1 A, 12 watts

Power consumptionDevice and power supply 2.0 watts, 100-240 VAC, 50-60 HzMountingRack mount Yes, with optional 1U rack shelf or back of the rack

mounting kitFurniture mount Yes, with optional bracket kitEnclosure type MetalWarranty 3 years parts and laborNOTE: All nominal levels are at ±10%.

Model Version Description Part numberUSB Extender Plus T Transmitter 60-1471-12USB Extender Plus R Receiver 60-1471-13USB Extender Plus D T Transmitter - Decorator-Style Version - White 60-1473-13USB Extender Plus D R Receiver - Decorator-Style Version - White 60-1473-23USB Extender Plus AAP T Transmitter - AAP Version - Black 60-1472-12USB Extender Plus AAP R Receiver - AAP Version - Black 60-1472-22USB Extender Plus AAP R Receiver - AAP Version - White 60-1472-23USB Extender Plus T HID HID Transmitter 60-1539-12USB Extender Plus R HID HID Receiver 60-1539-13USB Plus Matrix Controller Controller 42-267-01

For complete specifications, please go to www.extron.comSpecifications are subject to change without notice.

Form factors can be mixed and matched between transmitters and

receivers for mounting in all types of furniture and locations.

USB Extender Plus T

USB Extender Plus AAP T - Front

USB Extender Plus R

USB Extender Plus AAP R - Front

Architectural Adapter Plates

Rack-Mount

Decorator-Style Wall Plates

USB Extender Plus D T - Front USB Extender Plus D R - Front