USB Series Card User Manual

7/29/2019 USB Series Card User Manual

1/13

1

USB series card user manual

The first stepSoftware installThe second stepLogin monitorinterface

The third stepSystem configurationThe forth stepVideo playbackThe fifth stepIE remote network monitoring

The first stepsoftware install1. Open the software as below picture

www.ttbvision.com


2/13

2

2. Open htvsetu setup program get below icon.

3. Install software.

1 Install Card Driver(Must be installed)

2 Install digital surveillance systemsMust be installed3 Install digital sub-control systemThis system is controller to control the

overall networkcan selective install according to demand.4 Install the playerAfter installation the desktop will appear two playerone is the

www.ttbvision.com


3/13

3

multi-channel playerone is the single playercan selective install according to demand5 Install monitoring IE plug This is IE remote monitor plug, must be

installed.6 Exit

7 Above software after installed have to exit Suggest torestart the computer.

The second stepEnter themonitoring interface.1 Open the desktop icon

to enter the monitoring

interface.

2The monitoring software will ask you to enter a user name

and password and choice language.

Username and password is same:admin

www.ttbvision.com


4/13

4

3Monitoring interface. A,B,C,D,E represent 5 areas.

ACard list and the number of channels of this board.

B Video Number of Channels and recording Status. Click 1234Icon turns red it means is

recording. Pls make sure you are connecting the camera then it can record.

CPTZ control and color adjustment.

DMonitor screen display interface.

E:The main monitoring settings area.System configuration, playback, manual recording, capture,

loop out,camera name configuration and picture windows selection.

The third stepSystem configuration1 Click monitoring interface of enter systemconfiguration setup intereface.

Below A,B,C,D,E,F represent 6 areas.

1 System Status screen.

www.ttbvision.com


5/13

5

A:Selection window of system configuration menu.

:System Status.

Camera Settings.

Motion detection adjustment.

PTZ settings.

Video settings.

Local recording path and user settings.

Network Settings.

Plus the star is the key settings, pls take note.

B:Exit and minimize buttons.

C Camera standard selection random start autologin start automatic recording and cancell automaticrecording button.

DUsing time display.www.ttbvision.com


6/13

6

E: Internet and local network's IP status.

FNetwork and server status display.

2 Camera settings interface.

A:System Status.

B: Exit and minimize buttons.

C:The camera picture display areaD:Camera setting area Click the green zone can be selected video plan. Afterchoose the selected area will turn red.E:

PassagePresetBrightnessContrastGrayscaleChromaU choose TZ option buttons. According to the camera to

www.ttbvision.com


7/13

7

adjust the related settings.

F:The screen adjustment buttons of up and down, right and

left.

3 Motion detection adjustment interface.

A:System Status.


C: Channel selection switch and associated alarm output.

Can be set according to the demand for selective.DDetection scheme.Click the green zone can be selected video plan.After choosethe selected area will turn red.The red area is the motion detection area.E:Detection area setting.After the image appearsmouse can be freely selectedthe area to detectFSet up save button of detection parameters. Once set, youmust click on the button to take effect this area.

www.ttbvision.com


8/13

8

4 PTZ settings interface.

A:System Status.


C:Serial No.PorterParityData bitsStop bit setting andparameter settings.

DPTZ screen display interface.EPTZ test operation, setup and use.F:Save Settings button.

www.ttbvision.com


9/13

9

5 Video settings interface.

www.ttbvision.com


10/13

10

A:System Status.


C: Record parameter setting. This setting is important.Here to set up therecorder pack time and cover.

D: Stream configuration and OSD configuration. The streamconfiguration will affect the image quality.ERecord plan.Click the green zone can be selected video plan.After choose theselected area will turn red..F: Save Settings button. Optional save individual channels

and save all channels.

6 Local recording path and user settings interface.

A:System Status.


C: Video storage harddisck selection and the Save button.

This is very importantMust be tick the harddisk in the hard tick stored Otherwise it will notfind the video playbackAlso can not record video..D:Administrator userPTZ user and the video user'spassword setting.

7 Network Settings interface.

www.ttbvision.com


11/13

11

A:System Status.


C:Remote monitoring ID application fields. Fill in the ID numberyou want to apply for. Click apply networka dialog box will pop up.Certainly will meet variety

of situation: . Your ID number is occupied. That means this ID number already applied by

others, you have to change other ID number to re-apply. . Unknown error. If this dialog pop up,

you have to check whether your network is running well and if your router setting up a firewall

and the like.Solution:Initialize monitoring software,Check the routing,turn off the firewall and

so on. .ID Successful applicants,pls login

www.htvchina.com/p2p, and key in your ID then can remote monitoring.DPlatform server settings.E: Network IP and port settings. Here the default state is ok, no needrevise.

The forth stepVideo playbackwww.ttbvision.com
http://www.htvchina.com/p2phttp://www.htvchina.com/p2p


12/13

12

A: Channel selection box 1to 32 video channels. Click the

channel you want to play.

That character will turn red.Thatmeans you set up successfully.

BTime selection. Select the time you want to check.CChoose the date.Choose the date you need to check.Clickto select. And then click Search, you can find the E area have

a green color.

D:Playback screen display.

E Green indicates a video recorder The figure showschannel 1 has videos.

www.ttbvision.com


13/13

13

The fifth step IE Remote NetworkMonitoringAfter the ID applied successfully, enter

www.htvchina.com/p2p the below dialog pop up. Pls key in

the applied ID in the HTVID or IP columnClick the belowEnter button to enter to the IE control interface.

www.ttbvision.com
http://www.htvchina.com/p2phttp://www.htvchina.com/p2p

Documents

USB Series Card User Manual