User manual of High-definition camera pen

Photoes( just for reference)

一、 Product structure diagram  

二、 SummaryThis product is a digital pen with HD video shooting.It can shot and storage High-quality audio video.It has the advantage of simple operation, Small construction ,beautiy and portability.It’s the indispensable device in business,education,security,media,justice,travel,medicine,life and other fields and very popular with most persons.

On-off

Indicator

Reset button

CameraMicrophone

TF card compartment

USB port

三、 Instruction1. Turn on or off camera:Keep pressing the turn on button for 2

seconds,then the camera light is on red,at the same time,the camera is at Standby state.No matter at any state,Once the indicator is light,Keep pressing the button for 2

seconds,the blue one is light,then the camera will save the video files automatically and shutdown.

2. Video record:After turning on the camera,the camera is waiting for video,the moment the light is on red, press the button shortly,it begins to video,the moment the red light is slowly blinking.When press the button shortly

again,stop the video and save the files,the moment the light is on red.In order to

ensure the document’s size and safety,The system will save the video files

automatically every 50 minutes and continue video recording.

3. PC camera:At turning on state of any mode,connect the PC USB port,then it’s on the PC Camera mode.At this mode,you can use the

camera as the PC camera and chat on the web camera or Beat emoticons

and so on.

4. Connect to computer:At the state of turing off or standby,It can be connected to computer,then the computer will show the mark of Removable

Disk ,the video files will be saved at:_disk_REC/100MEDIA.When the camera is exchanging

the data with the computer,the blue light will blink fastly.When unload the

camera,pls click “Mobile Device Management icon” button which is on the lower right corner of the

computer,after the system make sure that you can pull out the disk,then disconnect the camera and the

computer.

5. Charge:connect the USB port of the computer or the charger,then it can be charged.When the battery is at the charge statuse,the red light will blink slowly.After the batterry is full,the red light will be always bright.

6. Set the time:the camera offer the function of showing the time in the video files(when the video is done),you also can reset the date or not show the date of the video files.The time format:”Year.month,day hour:min:second”,the ways to set the time is as bellows:

a. Turn off the camera→connect the computer→open the Removable

Disk of camera→At the any blank under the camera root directory,Click the

right button→At the Pop-up Menu ,remove the mouse to the “newly built”→choose “TXT”,then the document of setting the time is built.You also can build the document at other place such as the desk of computer,other removable disk or under other document in advance,then copy the document to

the removable disk root directory.

b.Open”time”txt,then input string of setting time,the string contain”year,month,date hour,minute,second show/hidden switch and so one”.If set the time,pls according to the bellowing format:

Showing time: 2009.01.01 12.01.01 YNot showing time: 2009.01.01 12.01.01 NDuring the above format,the time string is the time value which you want to set.Pls note that the blank space between year month day and hour minute second.The lowest priority “Y”and ”N”is the mark of showing time or not.”Y”means “Yes”,”N”means “No”.c. After you make sure that the time setting document has been copied to the root directory,unload the disk,turn on,then the time setting is finished.d.The time setting document will be saved in the camera.

exception handling:

When the storage space of the camera is not enough,after the red light and blue light blink about 5 seconds at the same time,it will save the present video files automatically and turn off.If you want to use the camera again,pls back-up the important video files to your computer and delete the older files in the camera,then make enough vacant.

When the electric quantity is not enough, after the red light and blue light blink about 5 seconds alternately,it will save the present video files automatically and turn off.If you want to use the camera again ,pls recharge it.

If the camera has no any response because of improper operation or other special reasons,you can dip into the reset hole to reset with a toothpick or other non-mental bar.

四、 Relatively ParameterSubject Relatively parameter

Video format AVIVideo code M-JPEG

Resolution 1280*960 VGA

Video frame rate 30fps±1fps

DVD Player Software   The operating system comes with or Major player software

Image Scaling4:3

Support system Windows me/2000/xp/2003/vista

Charging voltageDC-5V

Interface-typeMini USB port

Memeory card TF cardBattery type

High-capacity polymer lithium battery

五、 Attentions

a) Situation:pls comply with the relevant state laws strictly,the products can’t

be used for illegal purposes,otherwise You enjoy your backwash.

b) About the battery:As the use time growing,the working time of the

battery will be short.If you don’t use it for long time,pls recharge it fully before using.

c) File security ： The products are not professional storage device,it

doesn’t warrant the completeness and safety of the inside storaged files.Pls back-up the important files in your computer or other storage device.

d) Video quaity：The product is not professional video device,it doesn’t

assure that the video effects can satisfy you.

e) Working temperature：0—40°C。

f) Working Humidity：20%—80%，Pls don’t put the products at the

humid working environment,the product has not the function of warter resistant.

g) Film intensity ： In order to protect the optical device from the

hardlight, Pls don’t direct this product to the sunlight or other strength lights directly.

h) Health cleaning requirements:In order to make the camera lens or other

parts free from the dust and don’t affect the video quality,Pls don’t use it at the environment of high density of dust.You can brush the camera lens with the lens paper or eye cloth.

i) Other issue： The product is precision electronic products,pls don’t

make it suffer massive attack or quake.Pls don’t use it at high magnetic fields

or high electric fields.

j) Supplement：If you have any questions,pls contact the local agency.