Upload
others
View
5
Download
0
Embed Size (px)
Citation preview
YDM 3109
※The functions and design of this product can be changed without notice for quality improvement.※Chinese manual is from 33 page.
User ManualKeep this manual safe for future reference
Ver. PMU-0904-01
02
Please read the following before using your Yale GATEMAN product•This product is designed and manufactured to assure personal safety. Improper use can result in personal damage or
property loss. Please observe the procedures for installation, use and servicing.
•Yale GATEMAN is a precision electronic device. All safety and operating instructions should be read before the product is operated.
•Refer all servicing to qualified service personnel. Servicing is required when the product is damaged or to be re-installed.
•Check your installation conditions with the local service provider before installation as your door prep might be differentfrom the standard this lock conforms with.
•The products warranty does not cover defects or damages arising from the door defects, improper installation, lack of orimproper maintenance, improper storage, shipping and handling, ordinary wear and tear, misuse, abuse, accident,unauthorized service or use with unauthorized service parts.
•Disassembly, rework and reverse engineering are prohibited without a written approval of Yale except for a normalinstallation of the product.
•The trademarks, trade names, designs, copyright, patents and other proprietary right used on or embodied in the productand this manual shall remain the exclusive property of the manufacturer, cannot be copied or used in any form without the written authorization by Yale.
•Visit our website www.yalelock.com for more information on the products.
•The information in this manual is subject to change without notice.
must be followed to protect yourself and your property.
explains product functions and features.
prohibited must observe
Please read the following safety instructions to prevent any accident, property damage andinconvenience. Children should be well educated for the operating instruction. Keep thismanual in a convenient place so that you can refer to it when necessary.
IMPORTANT SAFETY INSTRUCTIONS
Do not attempt todisassemble the unitby yourself. That cancause an electronicshock and productdamage.
Clean only with drycloth. Do not use waterthat can cause damageto the electronic circuit.
Yale GATEMAN digitaldoor lock is a precisionelectronic device.
When you move,contact your localservice personnelfor re-installation.Check the servicecharge with yourservice provider.
Do not use water andany type of solventsuch as gasoline orbenzene as they cancause damage toelectronic circuit,deterioration and/orpaint peel-off.
Be careful not to have an unauthorized userknow your security code. Change yourcode periodically.
Do not use aninappropriate toolthat can causedamage or malfunc-tion of the product.
Handle the unitwith care.Excessive force,careless handlingmay cause productdamage.
Educate yourchildren about theproper use of theproduct.
Make sure the dooris securely lockedwhenever youleave your house,especially in themanual lock mode.
Make sure the distancebetween the door anddoor frame is not widened more than 5mm.
5mm
Keep card key readerpart clean and dry. Dust off dirt smoothlywith a soft cloth.
Do not have yourcard key lost orstolen.■ Immediate
re-registration ofall remaining keysis required toinvalidate the lostkey.
Remove all of thebatteries beforeinstalling orremoving a remotecontrol module.
Overview■ Proximity card identification
You can use your ISO 14443 A type RFID card such as creditcard or pass card as your card key.
■ Triple accessYou can unlock the door by the card, the security code or themechanical key at your convenience. You do not need to worryabout accidental lockouts by losing or forgetting the key.
■ Easy re-registration of keysIf you lose a key, you can invalidate the lost key by re-registering all other keys. You can register up to 40 card keysto add users.
■ Anti-collisionContacting multiple cards does not cause error to the lock. Thecard key reader will recognize the card key among a pack of cards.
■ Easy and simple operationOne-touch operation allows every user including children andsenior the simplest use.
■ Automatic lockingJust closing the door will automatically lock the door. Manualoperation is also available.
■ Break-in / Damage alarm80dB alarm will go off if anyone attempts to damage the lock orforces the door open.
■ Safe handleProtects from any break-in attempts through the safe handle.
■ Verification with the palmThe security code is verified by palm touching to randomize anyfingerprint residues on the keypad so protect from exposing it.
■ Emergency power supplyWhen the batteries are completely discharged you can easilysupply emergency power to the lock with the 9V battery.
■ Volume controlYou can change the volume. The break-in alarm still operateseven if the silent mode is on.
■ Forced lock modeInternal forced lock prevents anyone to unlock from the outsideand external forced lock makes only manual thumbturnavailable to open the lock from the inside.
■ Remote controlYou can use a remote control by installing the applicableRemote control module. (This option may not be availabledepending on your country or local dealer.)
■ Smart PadKeypad displays functional operation with lighting.
Press button
1. Card Key Registration
2. Security Code Registration
6. Forced Locking① Forced Lock Mode from inside.
② Forced Lock Mode from outside.
Enter the security code(6~12digits)
8. Turning off the alarm
① Contact the card key on [card key reader], or
② Enter the security code, or
③ Press and hold [ ] button for 5 seconds
Contact all the keysyou wish to register
on one by one
Press button
Press button Press button
① Mute : [Volume] Button
② Normal : [Volume] Button
③ Loud : [Volume] Button
7. Volume control
3. Locking the door from the outside
① The automatic Lock Sensor detects the doorclosing and locks the door within 5 seconds, or
② Touch the keypad with palm for locking thedoor in [Manual Lock Mode]
4. Unlocking the door from the outside
9. Emergency power supply
9V Battery can beused to supplyelectricity to the unit.
① Automatic Lock Mode :Press [ ] Button
② Manual Lock Mode :Press [ ] Button
5. Automatic / Manual Lock Mode
②Wake up the lock with the palm touch, enter the security code and retouch the lock with the palm.
① Contact Card key
Security Code
Contact 5 seconds
or
Contact [ ]3 seconds after putsecurity code
Please do remember below operation!Basic Operation
Manual Lock Mode :Press [ ] Button. With the
palm
Identification of Product 09
Specifications 08
How to use
1. Registering Card Keys
2. Registering Security Code
3. Locking the door from the outside
4. Unlocking the door from the outside
5. Locking the door from the inside
6. Unlocking the door from the inside
7. Enabling/disabling Safe handle
8. Automatic / Manual Lock Mode
9. Forced Lock Mode
10. Break-in / Damage alarm
11. Wrong-try Lock-out
12. Volume control
13. Battery use & Replacement
14. Displaying operation status (Smart Pad)
11
13
14
15
17
17
18
20
21
22
23
24
25
26
Cautions
1. Emergency power supply
2. Lost card key
3. Product malfunction
4. Emergency mechanical key override
30
31
31
32
1. Remote control module
2. Remote control
Option
27
28
33
C O N T E N T S
Chinese Manual
Specifications
Specifications
Front (Front Body)
Back (Main Body)
Lever
Card Keys
Battery
68.6(W) x 306.6(H) x 27(D)(70.6)mm, Zinc die-casting
72.8(W) x 306.6(H) x 37.0(D)(80.8), Flame-Retardant ABS, Zinc D/C
Zinc die-casting
4 EA
4EA 1.5V AA alkaline batteries (Operating voltage: 4.5 ~ 6 V)
Operating temperature : -15~55℃ (5~131 F̊)
Up to 40 keys (sold separately)
Last up to 10 months (10 times used a day)
Remarks
※Battery life may vary depending on temperature, moisture levels, frequency of use and the quality of the batteries. ※Please make sure that all parts are included when purchasing the product. ※Optional products may not be available depending on your country or local dealer.
Lock case Steel and SUS304
Parts
Remote Control Wireless OptionalOption
Front (Front Body) Remote control Remote control moduleBack (Main Body) Lock case
■Basic Contents
• 4 Card keys• Emergency keys• Screws• Installation Template• 4 Batteries • Users Manual
■Option
08
09
Emergency Cover
Emergency PowerSupply Terminal
Lock case
Latch Bolt
Automatic Locking Sensor
Dead Bolt
9V Emergency battery (Optional)
Identification of Product1. Front (Front Body, install on the outside of the door)
Dead Bolt Jam Lamp
Battery Change Lamp
Keypad (10-Key)
Lever
Card Key Reader
※Pull down Emergency Cover
Reset button
Emergency Key
Ide
ntific
atio
n o
f Pro
du
ct
10
2. Back (Back Body, install on the inside of the door)
Registration button
1.5V AA Alkaline Batteries (4EA)
Slot for Remote controlmodule(Option)
Auto / Manual Lock button
Volume Control Switch
Battery Cover
Internal Forced Lock Switch
Manual thumb turn
Lever Safe handle button
11
How to Use1. Registering Card Keys
▣ Keep the door open while you register card key to prevent yourself from accidentally
getting locked out.
4 card keys are provided atpurchase and you can registerup to 40 card keys.
▣
If you lose your current cardkey, re-register all the remainingkeys to invalidate the lost key.
▣
Contact your local dealer for additionalcard keys.
▣
ISO 14443 A type RFID card can beregistered as your card key.
All card keys should be registered at a time.
Ho
w to
Use
▣
12
Press[Registration] button
If it takes too long (over 7seconds) to contact acard key after pressing
[Registration] button,the card will not beregistered.
•The numbers of registered cards are shown on the keypad.
Contact all the card keys you wish to register on the[card key reader] one by one
If you hear a “pik” sound, thecard keys are registered. If you hear a “ti-to-ti-to” sound,the card key had been alreadyregistered.
Open [Battery Cover] andPress [Registration]button.
Press[Registration] button
The registration iscompleted with a “pi-bi-bing” sound.
Check the keyoperation
Opening the door withyour card key. Contactyour card key to [cardkey reader]
Pik
Opening the door with your card key
Touch the keypad with thepalm Contact card key
13
2. Registering Security Code
▣ Keep the door open while you register the security code to prevent yourself from accidentally getting locked out.
Set a code of 6~12 digits using the number buttons(6 digits)000000 ~
The old code is automatically deleted when registering a new code.
▣
▣ Ho
w to
Use
(12 digits)000000000000
Press[Registration] button
The registration iscompleted with a “pi-bi-bing” sound.
Press [Registration] button
If it takes too long (over 7 seconds) to enter thecode after pressing
[register security code]button, the code will notbe registered.
< > and < >buttons can not be usedfor security codes.
Enter your securitycode
Enter the code you wish to register. (6~12 digits)
Open [Battery Cover] andPress [Registration]button.
Check your securitycode
Opening the door with yourcode
Touch with the palm [keypad] Enter security code
Touch with the palm [keypad]
•When registering the security code, it shows what the user has justregistered in order.
Once registrationis completed,make it sure toopen the lockwith your newsecurity code.
3. Locking the door from the outside※Please check Automatic / Manual Lock Mode
The automatic lock sensor detects the doorclosing and locks the door automaticallywithin 5 seconds.
The door locks when touch the keypadwith the palm.
Within 5 secondsAutomaticlock mode
Manual lock mode
14
As the automatic lock function does not work in manual lock mode, make sure to check that the door is securely lockedwhen leaving the premises.
Di-di-ding
Di-di-ding
15
Ho
w to
Use
4. Unlocking the door from the outside
Touch the keypadwith the palm
Securitycode(Normal)
Unlockingthe doorwith cardkey
Touch the keypadwith the palm againor press button
Enter your security code
Confirming thedoor open
Confirming the lockunlocked with a “pi-bi-bing” sound
Pi-bi-bing
•The keypad cannot be operable in case of wearing the glove.•Using the palm or pressing button do the same function after entering the security code.•If the card key does not work properly, please contact the card key after touching the keypad with the palm.
Pi-bi-bing
or
Contact card key Confirming the door open
16
Touch thekeypad withthe palm
Openingthe lockby thefake PINcode
Press any number (fake PINcode) and the right PIN code
Confirming
orPi-bi-bing
•Use the fake PIN code feature whenever there is any chance of exposing the right PIN code to others.
Opening the lock by the fake PIN code
•This explains how to open the lock with the fake PIN code.
•When any incorrect PIN codes are inputted five times in a row, it turns the lock down for three minutes.•When this function is on, the user cannot use the fake PIN code function until any normal verification through key, card, fingerprint, PIN code,
or opening the lock from inside is made. So, the user is encouraged to use the right PIN code without any fake number to verify the lock.
The lock is unlockedwith melody (“Pi-bi-bing”)
Please slightly touchthe exterior keypador press buttonto finish.
Touch the keypad with thepalm or press
button
Please slightlytouch the exteriorkeypad.
Fake PIN code ➔ Right PIN code
Right PIN code ➔ Fake PIN code
or
•This feature is not working when the lock is locked down due to wrong-try lock-out delay.
17
Ho
w to
Use
5. Locking the door from the inside
When set on automatic lock mode,the automatic lock sensor detectsthe door closing and locks the doorautomatically within 5 seconds.
Use [manual thumb turn] on theback body.
Automaticlock mode
Manual lock mode
6. Unlocking the door from the inside
Within 5 seconds
Down the leverwhile pressingthe Safe handlebutton
① Down the lever while pressing the Safe handle button
② Turn the manual knob
Pi-bi-bing
Enabledstatus
DisablingSafe handle
Disabledstatus
Take out the hexagonwrench which is dockedin the battery cover.
Turn the fixing bolt onthe side of the innerlever to the rightwhile pressing theSafe handle button.
fixing boltSafe handlebutton
The hexagon wrench
EnablingSafe handle
Take out the hexagonwrench which is dockedin the battery cover.
Turn the fixing bolt onthe side of the inner leverto the left until the Safehandle button pops out.
The hexagon wrench
fixing boltSafe handlebutton
18
7. Enabling/disabling Safe handleGATEMAN YDM3109 protects from any break-in attempts through the Safe handle button.
Be careful not losing the fixing bolt when you loosen it to set the feature on.
Factory default : Enabled status
Down the lever while pressing theSafe handle egress button
Example
19
Ho
w to
Use
Egressing when the Safe handle egress button is on
•The locking bolt would not be retracted in case of not pressing the button.•When the fire detection sensor is on, the feature is still on so the user must follow the usual procedure to open the door.
1820
8. Automatic / Manual Lock ModeAutomatic locking sensor which detects the door closing and automatically locks the door in 5 seconds. Automatic lockmode is a factory default setting.
Push up the Button
on Mode.
Push down the Button
on Mode.
Setting it onautomatic lockmode
Setting it onmanual lockmode
Manual Mode Automatic Mode
Automatic Mode Manual Mode
21
Ho
w to
Use
9. Forced Lock Mode
Contact card key
External forced lock mode
Contact the card key on[card key reader] for 5seconds until you hear 3beeps.
Settingexternalforced lockmode on withthe card key
Confirming external forced Lock
Settingexternalforced lockmode on withthe securitycode
5 seconds
①
②
External forced lockmode is set on with“Di-ri-ric” sound.
Touch the keypadwith the palm
Internal forced lock mode
When internal forced lock mode is on, the keypad is not functioning.
A warning beep sound will go off if anyone attempts to verify by the securitycode or the card from outside.
Enter the security code
Press button for3 seconds until youhear 3 beeps
Confirming external forced LockExternal forced lockmode is completed with “Di-ri-ric” sound.
Turn the mode
22
10. Break-in/Damage alarm
Turning off the alarm
80dB alarm goes off when the lock is damaged or anybodybreaks in by force while the door is locked.
Enter your securitycode
Contact your card keyPress [Unlock]button on the remotecontrol
Press and hold[Registration] buttonfor 5 seconds
or or or
(Choose one of the four options below.)
23
Ho
w to
Use
11. Wrong-try Lock-out
No keypad function is available during this wrong-try lock-out delay.The break-in and damage alarm work regardless of this function.
5 times
•If incorrect security codes or unregisteredcard keys are attempted 5 times in a row,it will lock out for about 3 minutes with theblinking LED.
•The system will resume the operationautomatically after 3 minutes of lock-out.If you press [Registration]button onthe back body or down the lever whilepressing the Safe handle egress button,it resumes the operation.
Lock-out 3 minutes
The lighting digit on the keypadis showing remaining time
Resuming
24
12. Volume control
This function can control the operating sounds so that the door can be opened and closed without disturbing others.
Setting the volume Button on “ 0 ”
❶ Silent Mode
Setting the volume Button on “ 1 ”
❷ Normal Mode
Setting the volume Button on “ 2 ”
❸ Loud Mode
25
Ho
w to
UseThe LED turn red
■ Battery life(stand alone)This product uses 4 1.5Valkaline AA batteries whichcan be used approximately 10months on the condition of 10times open/close cycles perday.
※ Battery life mayvary due totemperature,moisture,frequency ofuse, and thequality of the batteries.
■Battery replacementwarningReplace all 4 batteries whenthe low battery warningmelody rings and the LEDturns red. (Use authenticalkaline batteries)
1:1 actual size
1.5V AA size alkaline battery
LED(Red)
When a low batterywarningmelody rings
•Always check + and - directions when inserting batteries.•Use the authentic alkaline batteries. It is a user’s responsibility for damage
caused by using unauthentic batteries.•Risk of explosion if battery is replaced by an incorrect type.•Dispose of used batteries according to the instructions.
13. Battery use & Replacement
Do not mix new andused batteries.
10 months
26
14. Displaying operation status (Smart Pad)
➞ 3 minutesremaining
Wrong-try Lock-outwarning starts
➞ 1 minuteremaining
1minutepassed
1minutepassed
❶ Battery Replacement warning
Battery Icon lights on.
❷ Dead Bolt locking motion warning
Locking Icon lights on.
❸ Wrong-try Lock-out warningIf incorrect security codes or unregistered card keys are attempted 5 times in a row, it will lock out for about3 minutes with the blinking LED.
❹ External / Internal forced lockingStarting from the left column, the LED comes on from left to right to left for twice.
❺ Break-in / Damage warningThe LED keeps coming on to theclockwise when a break-in or damageis happened.(Alarm lasts for 30 minutes)
❼ Card Key registrationWhen registering the card keys,Keypad displays the number of registeredcard keys.(Right : is on ➞ 3 keys have been registered)
➞ 2 minutesremaining
❻ Security Code registrationWhen registering the security code,it shows what the user has just registeredin order.(Right : In case of registering 1, 2, 3, 4, 5 and 6)
Op
tion
27
1. Remote control module
Option
Open [batterycover] and removeall batteries
Remote control module should be installed in advance to use remote control.Open [battery cover] and insert the module into the slot. Proper functioning ofthe module can be checked by operating a remote control.
Insert remote controlmodule into the slot
Put batteries backin (Check + , -directions)
Confirming
Installing remote control module
•Remote control module :Required for the use ofremote control
Di-ri-ri-ri-ring
28
2. Remote controlThe remote control is an FSK(Frequency Shift Keying) type that uses a Floating ID encoding system, which changes thewireless code each time you use it, so that there is no risk of hacking. It is non-directional and the operational range is upto 10~20m.
※Caution! The operational range may vary depending on the installation environment.Re-registration automatically deletes the previous registered remote control.
Press
[Registration] button
Press , ,
buttons
Press [Registration]button located on thefront of the remotecontrol with a pin
You can register up to 5remote controlsconsecutively. In order toregister consecutively,press [Registration] buttonon eaeh remote controlwith 10 second intervals.Remote control makes abeep when it is properlyregistered.
Press
[Registration] button
Check remote
control operation
Press [open] or[close] button tocheck theoperation
Registering remote control
29
Op
tion
Deleting remote control registration
Press[Registration] button
Press , ,buttons
Deleting remote controlregistration
Remote control registrationis cancelled with a “di-ri-ri-ring” sound.
Press [Registration] button
Open up the battery cover at the back of theremote control and change the batteries.
Unlocking the doorLocking the door
How to use the remote control
Changing the batteries
Press [close] button, and the doorwill lock within 2~3 seconds.
Press [open] button, and the doorwill unlock within 2~3 seconds.
30
1. Emergency power supplyIn case the batteries are completely discharged 9V battery can be used to supply electricity to the unit. Unlock with the cardkey or security code while contacting a 9V battery just like the below instruction. Discharged batteries should be replacedright away.
Cautions
Discharged Holding a 9Vbattery
ChangeBatteries
Replace all of thebatteries
Confirming
Check out if a cardkey and securitycode work properlyafter replacing allbatteries.
Security code use
Touch the keypad with thepalm. Enter the security codeand retouch the keypad orpress button.
Open thedoor
31
Ca
utio
ns
2. Lost card keyIf you lose your card, rest of card keys must be re-registered to invalidatemissing one.
Lost card key Re-registering card key
Reset Button
Press reset button located in the left of [emergency power terminal] with a pin andtry again with the key or the security code.If it still does not work, call for after-sales service.
3. Product malfunction
Enter the security code in case you lose the card key or you are not carrying it.
※It is a user’s liability to break the lock because the user did not register any security code.
32
4. Emergency mechanical key override
•Keep the mechanical override key in a safe place.Otherwise, you may not get a free after-sales service even within during the warranty period.
A hole onemergency key
Please operate the lock with the mechanical key when there is a problem to the lock or unlock the door that is the sameas below listed.
•Forgotten security code
•Electronic malfunction
※ Please slide the cover downward
Pull down theemergency cover
❶
❷
❸