User’s Manual - admost manual of EX-92290_i... · Hardware Setup ... 8 BLUE_RTN 2.4. HDMI HDMI ... Intel® HD Graphics 620 / 610 (Kabylake) System Memory DDR3L-1333/1600; Up to

EX-92290-i Series

User Manual

TOPSCCC Technology CO., LTD • Manual Version 1.1 • 30.06.2015 www.topsccc.com

User’s Manual

EX-92290-i Series

Fanless BOX PC

w/Intel SkyLake/Kaby Lake

(i3/i5/i7 & Celeron 3965U)(Redhat enterprise 7.0/ Linux Kernal

4.11/Win 10 IoT)

EX-92290-i Series

User Manual


Copyrights

Copyrights © 2016 All rights reserved. The information in this document is subject to change without prior notice in

order to improve reliability, design and function and does not represent a commitment on the part of the

manufacturer.

This document contains proprietary information protected by copyright. All rights are reserved. No

part of this manual may be reproduced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

All trademarks are property of their respective owners

Liability Disclaimer In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential

damages arising out of the use or inability to use the product or documentation, even if advised of the

possibility of such damages.

Regulatory Information

CE Notice

EX-92290-i Series User Manual


Contents Copyrights ................................................................................................. ii

Liability Disclaimer ................................................................................... ii

Regulatory Information ............................................................................ ii

CE Notice ............................................................................................................. ii

Contents ................................................................................................... iii

1. Hardware Setup .................................................................................... 4

1.1. Packing Contents ......................................................................................... 4

1.2. Quick Tour ..................................................................................................... 4

Front View ...................................................................................................... 4

Back View ....................................................................................................... 4

Front Panel I/O ............................................................................................... 5

Back Panel I/O ............................................................................................... 5

1.3. Basic Peripherals Installation ...................................................................... 6

Power Adapter ................................................................................................ 6

USB Mouse, USB Keyboard and USB ODD .................................................. 7

LAN Cable ...................................................................................................... 7

1.5. Turn on the device ........................................................................................ 9

2. I/O Definition ........................................................................................ 10

2.1. Power Connector ........................................................................................ 10

2.2. Serial Port.................................................................................................... 11

2.3. VGA Port ...................................................................................................... 12

2.4. HDMI ............................................................................................................ 12

2.5. DP ................................................................................................................ 13

3. Specification ........................................................................................ 14

4. Mother board………………………………………………….……………15

EX-92290-i Series

User Manual


1. 1. Hardware Setup

1.1. Packing Contents

1.2. Quick Tour Front View

Back View

LED Indicator

A. The Power indicator will glow green when power is on.

B.

The HDD (SSD) is Working

A B

EX-92290-i Series

User Manual


Front Panel I/O

A. Line out / Mic in F. COM 3

B. USB 2.0 G. COM 4

C. USB 2.0 H. COM 5

D. COM 2 I. COM 6

E. COM 1

Back Panel I/O

A. 19VDC in F. DP

B. Power Switch G. LAN 1

C. Power Reset Switch H. LAN 2

D. VGA I. USB 3.0

E. HDMI J. Antenna Hole

A B

C D E

F

G H

I

J

E G F H I

D F C B A

EX-92290-i Series

User Manual


1.3. Basic Peripherals Installation

All cables and wires from peripherals to the device are recommended to

connected as the direction as shown below.

Power Adapter

Important!

Plug the AC adapter into the Box, and then connect to the mains power supply.

Connect the 2-pin output jack of the adapter to the DC in jack on the back panel of

the device.

EX-92290-i Series

User Manual


USB Mouse, USB Keyboard and USB ODD

Connect your USB Mouse, USB Keyboard and USB ODD to USB ports on the

front or back panel of the device.

LAN Cable

Connect one end of RJ-45 LAN cable to the LAN port on the back panel of the

device, another end to your network device.

EX-92290-i Series

User Manual


EX-92290-i Series

User Manual


1.5. Turn on the device 1. Make sure all peripherals are connected properly.

2. Press and hold the power switch until the power indicator on the back panel

glow green.

Power Switch

EX-92290-i Series

User Manual


2. 2. I/O Definition

Please refer the detailed technical information about all I/O ports as followings.

2.1. Power Connector

PIN Signal Name PIN Signal Name

1 19V 3 GND

2 GND

EX-92290-i Series

User Manual


2.2. Serial Port

COM1, 3, 4, 5

Pin NO. R232 Pin NO. R232

1 DCD 6 DSR

2 RXD 7 RTS

3 TXD 8 CTS

4 DTR 9 RI

5 GND

COM 2

Pin NO. R485

Pin NO. 485

1 RS485- 6 -

2 RS485+

7 -

3 - 8 -

4 - 9 -

5 -

COM 6

Pin NO. R232 Pin NO. R232

1 - 6 -

2 RXD 7 -

3 TXD 8 -

4 - 9 -

5 GND

EX-92290-i Series

User Manual


2.3. VGA Port

VGA DE-15

PIN Description PIN Description

1 RED 9 KEY/PWR

2 GREEN 10 GND

3 BLUE 11 ID0/RES

4 ID2/RES 12 ID1/SDA

5 GND 14 VSync

6 RED_RTN 15 ID3/SCL

7 GREEN_RTN

8 BLUE_RTN

2.4. HDMI

HDMI


1 TMDS Data2+ 11 TMDS Clock Shield

2 TMDS Data2 Shield 12 TMDS Clock–

3 TMDS Data2– 13 CEC

4 TMDS Data1+ 14 Reserved（N.C. on device）

5 TMDS Data1 Shield 15 SCL(I²C serial clock for DDC)

6 TMDS Data1– 16 SDA(I²C serial data for DDC)

7 TMDS Data0+ 17 DDC/CEC Ground

8 TMDS Data0 Shield 18 +5 V Power

9 TMDS Data0– 19 Hot Plug Detect

10 TMDS Clock+ 20 TMDS Clock Shield

EX-92290-i Series

User Manual


2.5. DP

DP


1 ML_Lane 0（p） 11 GND

2 GND 12 ML_Lane 3（n）

3 ML_Lane 0（n） 13 GND

4 ML_Lane 1（p） 14 GND

5 GND 15 AUX_CH（p）

6 ML_Lane 1（n） 16 GND

7 ML_Lane 2（p） 17 AUX_CH（n）

8 GND 18 Hot Plug

9 ML_Lane 2（n） 19 DP_PWR Return

10 ML_Lane 3（p） 20 DP_PWR

EX-92290-i Series

User Manual


3. 3. Specification

Main Board

CPU

SkyLake I5-6300U (Dual Core, 3M Cache, up to 3.00 GHz) I5-6200U (Dual Core, 3M Cache, up to 2.80 GHz) I3-6100U (Dual Core, 3M Cache, up to 2.30 GHz) Kaby Lake I7-7500U (Dual Core, 4M Cache, up to 3.90 GHz) I5-7300U (Dual Core, 3M Cache, up to 3.50 GHz) I3-7100U (Dual Core, 3M Cache, 2.40 GHz) Celeron 3965U (Dual Core, 2 MB Cache, 2.2 GHz)

Graphic Intel® HD Graphics 520 (Skylake) Intel® HD Graphics 620 / 610 (Kabylake)

System Memory DDR3L-1333/1600; Up to 32GB

EX-92290-i Series

User Manual


Cooling Solution Fanless conductive thermal module

BIOS AMI UEFI BIOS

OS Windows 10 / Linux Kernel 4.11

Storage Device

Interface SATA-3 x 1 + mSATA x 1

2.5” SSD or HDD (Option) or mSATA SSD (Option)

I/O Ports

USB USB 3.0 x 2, USB 2.0 x 4

Giga LAN Gigabit Ethernet by RJ-45 x 2

Display Port HDMI Type A Female Connector x 1 VGA x 1 DP x 1

Audio Port Line Out /in x 1

COM Port COM 1, 3, 4, 5: RS232 COM 2: RS485 (Data+, Data-) COM 6: RS232 (TX, RX only)

System Power Button

Power On / Off Switch x 1 Reset Switch X1

DC-in 19V DC input- lockable (9 ~ 28V wide voltage range)

Antenna Hole Wi-Fi Antenna Hole x 2

Wireless Connectivities

Mini PCI-e Slot Support Wifi Module (Option)

Indicators

Power LED x 1, HDD LED x 1

EX-92290-i Series

User Manual


Others

Mounting mechanism Support wall mount

Color Black

Material Metal enclosure

Certifications CE / FCC / WEEE / RoHS

Dimension ( WxDxH ) 200 .0x 122.4 x 50.0 mm with Wall mount and without Antenna

Net Weight / Gross Weight

1.2 kg, 2.64 lb / 2.1kg, 4.63 lb

Environmental Conditions

Operating Temperature -20 ~ 60°C

Storage Temperature -20 ~ 70°C

Relative Humidity 20% ~ 85% RH (non-condensing)

EX-92290-i Series

User Manual


User’s Manual

4. Motherboard

EX-92290-i Series

User Manual


Copyrights © 2017 All rights reserved. The information in this document is subject to change without prior notice in

order to improve reliability, design and function and does not represent a commitment on the part of the

manufacturer.

This document contains proprietary information protected by copyright. All rights are reserved. No

part of this manual may be reproduced by any mechanical, electronic, or other means in any form

without prior written permission of the manufacturer.

All trademarks are property of their respective owners

Liability Disclaimer In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential

damages arising out of the use or inability to use the product or documentation, even if advised of the

possibility of such damages.

Regulatory Information

CE Notice

EX-92290-i Series

User Manual


1. Hardware Setup Attentions

1) Notes under a table or figure indicate the difference of models, or alternative

definition of specific pin of the header (jumper/connector).

2) Identify the first pin of a header or jumper:

Usually, there is a thick line or a triangle near the header ’s or jumper ’s pin 1.

Square pad, which you can find on the back of the motherboard, is usually

used for pin 1.

EX-92290-i Series

User Manual


2. Specification Main Board

CPU

Intel® Kaby Lake, Max. TDP 15 Watt: - Intel® Core™ i7-7500U (Dual Core, 4M Cache, up to 3.50 GHz) - Intel® Core™ i5-7300U (Dual Core, 3M Cache, up to 3.50 GHz) - Intel® Core™ i3-7100U (Dual Core, 3M Cache, 2.40 GHz) - Intel® Celeron® 3965U (Dual Core, 2M Cache, 2.20 GHz)

Intel® Skylake, Max. TDP 15 Watt: - Intel® Core™ i7-6500U (Dual Core, 4M Cache, up to 3.10 GHz) - Intel® Core™ i5-6200U (Dual Core, 3M Cache, up to 2.80 GHz)

- Intel® Core™ i3-6100U (Dual Core, 3M Cache, 2.30 GHz)

Graphic Skylake: Intel® HD Graphics 520 Kaby Lake: Intel® HD Graphics 620 / 610

System Memory SO-DIMM DDR3L up to 1600MHz x 1, Max. 8GB

Cooling Solution Fanless conductive thermal module

BIOS AMI UEFI BIOS

OS Windows 7 (Skylake only) Windows 10 Linux kernel 4.0+ & associated distributions

Storage Device

HDD or SSD Optional 2.5" HDD or 2.5" SSD x 1 (SATA 3.0 by cable)

mSATA SSD Optional mSATA SSD x 1

I/O Ports

USB USB 3.0 x 2, USB 2.0 x 4

Giga LAN Gigabit Ethernet by RJ-45 x 2

Display Port HDMI x 1 VGA x 1 DP x 1 (Optional)

Audio Port Line Out /in x 1

COM Port COM 1, 3, 4, 5: RS232 COM 2: RS485 (Data+, Data-) COM 6: RS232 (TX, RX only)

System Power Button

Power On / Off Switch x 1 Reset Switch X1

DC-in Locking Jack 9~28V DC input

Antenna Hole Wi-Fi Antenna Hole x 2

Wireless Connectivity

Mini PCI-e Slot Support WiFi Module (Option)

Indicators

Power LED x 1, HDD LED x 1

Others

Mounting mechanism Support wall mount

Color Black

Material Metal enclosure

Certifications CE / FCC / WEEE / RoHS

Dimension ( WxDxH ) 20 x 12 x 5 cm (7.9 x 4.7 x 2 inch) without wall mount and without Antenna

EX-92290-i Series

User Manual


Net Weight / Gross Weight

1.9 kg, 4.19 lbs / 2.8kg, 6.17 lbs

Environmental Conditions

Operating Temperature With extended temperature peripherals : -20 ~ 60°C (-4 ~ 140°F) with 0.7m/s air flow

Storage Temperature -40 ~ 85°C (-40 ~ 185°F)

Relative Humidity 95% @ 40°C (non-condensing)

EX-92290-i Series

User Manual


3. Location of Jumpers / Headers and Connectors

EX-92290-i Series

User Manual


Jumpers / Headers and Connectors

1 Audio Pin Header 15 System Fan Connector

2 Expansion IO Connector 16 DC Power Input Connector

3 Front USB Pin Header 17 PS/2 Pin Header

4 COM2 RS485 Signal Pin Header 18 VGA Pin Header

5 Front Panel Pin Header 19 Clear CMOS Jumper

6 Front USB3 Pin Header 20 mSATA Slot

7 GPIO Pin Header 21 SATA 3.0 Connector

8 COM6 Pin Header 22 SO-DIMM Slot

9 COM1,3,4,5 Pin Header 23 Mini PCIe Slot

10 SIM Card Pin Header 24 VGA Connector

11 eDP Signal Pin Header 25 HDMI

12 Panel VDD Select Jumper 26 LAN Connectors

13 Panel Backlight Control Pin Header 27 USB3.0 Connectors

14 SATA Power Pin Header

EX-92290-i Series

User Manual


Location Header Pin Definition Pin Definition

J_AUDIO1

1

LOUT_R

2

MCIN_R

3 GND

4 GND

5 GND

6 GND

7 LOUT_L

8 MCIN _L

Location Jumper Setting Function

CLR_CMOS1

1-2(Default)

Normal

2-3

Clear CMOS


J485

1

RS485+

2

RS485-


J_COM5-6

1 COM6_RXD

2 Reserved

3 COM6_TXD

4 Reserved

5 GND

6 GND

4. Definition of Jumpers / Headers and

Connectors 4.1 Audio Pin Header (4*2 Pin 2.0mm)

4.2 Clear CMOS Jumper (3*1 Pin 2.54mm)

4.3 COM2 RS485 Signal Pin Header (2*1 Pin 2.54 mm)

4.4 COM6 Pin Headers (3*2 Pin 2.00mm)

EX-92290-i Series

User Manual



J_COM1-4

1

COM1_DCD#

2

COM1_RXD

3

COM1_TXD

4

COM1_DTR#

5

GND

6

COM1_DSR#

7

COM1_RTS#

8

COM1_CTS#

9

COM1_RI#

10

GND

11

COM3_DCD#

12

COM3_ RXD

13

COM3_ TXD

14

COM3_DTR#

15

GND

16

COM3_DSR#

17

COM3_RTS#

18

COM3_CTS#

19

COM3_RI#

21

COM4_DCD#

22

COM4_RXD

23

COM4_TXD

24

COM4_DTR#

25

GND

26

COM4_DSR#

27

COM4_RTS#

28

COM4_CTS#

29

COM4_RI#

30

GND

31

N/C

32

COM5_RXD

33

COM5_TXD

34

COM5_DTR#

35

GND

36

COM5_DSR#

37

COM5_RTS#

38

COM5_CTS#

39

N/C

40

GND


J_VGA1

1

CRT_ON#

2

CRT_VS

3

CRT_HS

4

GND

5

CRT_R

6

GND

7

CRT_G

8

GND

9

CRT_B

10

GND

11

VGA_SDA

12

VGA_SCL

4.5 COM1,3,4,5 Pin Headers (20*2 Pin 2.00mm)

4.6 VGA Pin Header (wafer 12*1 Pin 2.00mm)

EX-92290-i Series

User Manual


Location

Header

Pin

Definition

Pin

Definition

DC_IN1

1

+9~28V

2

+9~28V

3 GND

4 GND

Location Connector Pin Definition Pin Definition

SVIO

1

+ 5 V

2

+ 5 V

3

USB0-

4

USB2-

5

USB0+

6

USB2+

7

GND

8

GND

9

SERIRQ

10

GND

11

USB1-

12

USB1+

13

GND

14

SVIO_CLK-

15

SVIO_CLK+

16

GND

17

PCIE_RX1-

18

PCIE_RX1+

19

GND

21

WAKE#

22

NC

23

PCIE_TX1-

24

PCIE_TX1+

25

GND

26

LAD3

27

LFRAME#

28

LAD2

29

SIO_GP40SB

30

LAD1

31

SIO_GP10SB

32

LAD0

33

+ 3.3V

34

GND

35

+ 5 V

36

PCI_RST#

37

+ 5 V

38

SVIO_LCLK

39

+ 3.3V

40

+ 3.3V

4.7 DC Power Input Connector (wafer 4*1 Pin 2.54mm)

4.8 Expansion IO Connector (20*2)

EX-92290-i Series

User Manual



J_GPIO1

1

PCH_GPP_D17

(0xFDAE0548 Bit0,H)[1]

2

PCH_GPP_D18

(0xFDAE0550 Bit0,H)

3

PCH_GPP_D19

(0XFDAE0558 Bit0,H)

4

PCH_GPP_D20

(0xFDAE0560 Bit0,H)

5

GND

6

PCH_GPP_G6

(0xFDAC04F0 Bit1,H)

7

PCH_GPP_G7

(0xFDAC04F8 Bit1,H)

8

PCH_GPP_A17

(0xFDAF0488 Bit1,H)

9

PCH_GPP_A16

(0XFDAF0480 Bit1,H)

10

+ 3.3V


F-USB1

F_USB2

1

+ 5 V

2

+ 5 V

3 USB3- [1]

4 USB4- [1]

5 USB3+ [1]

6 USB4+ [1]

7

GND

8

GND

10

GND


F_PANEL1

1

HD LED+

2

Power LED+

3

HD LED-

4

Power LED-

5

GND

6

PWR+

7

RESET#

8

PWR-

9

N/C

4.9 GPIO Pin Header (5*2 Pin 2.00mm)

Note:

[1]: “H” or “L” means the default voltage is High or Low level.

4.10 Front USB Pin Headers (5*2 Pin 2.00mm)

Note:

[1]: F_USB2(pin3/pin5) share the same signal with miniPCIe, and

F_USB2(pin4/pin6) share the same signal with one USB2.0 of

SVIO(pin11/pin12). They can’t be used simultaneously.

4.11 Front Panel Pin Header (5*2 Pin 2.54 mm)

EX-92290-i Series

User Manual



F_USB3

1

+ 5 V

2

+ 5 V

3

USB5-

4

USB6-

5

USB5+

6

USB6+

7

GND

8

GND

10

GND


LVDS1

1 VDD [1]

2 VDD [1]

3 Reserved

4

GND

5 VDD [1]

6 VDD [1]

7 Reserved

8

EDP_TX0_D-

9 Reserved

10 EDP_TX0_D+

11

GND

12 GND

13 Reserved

14 EDP_TX1_D-

15 Reserved

16

EDP_TX1_D+

17

GND

18

N/C

19 Reserved

20 EDP_TX2_D-

21 Reserved

22

EDP_TX2_D+

23

GND

24 GND

25 Reserved

26

EDP_TX3_D-

27 Reserved

28

EDP_TX3_D+

29

GND

30

GND

31

N/C

32

EDP_HPD#

33

GND

34

GND

35

Reserved

36 EDP_AUX_D-

37

Reserved

38

EDP_AUX_D+

39

N/C

40

GND

4.12 Front USB3 Pin Header (5*2 Pin 2.00mm)

4.13 eDP Signal Pin Header (20*2 Pin 1.25mm)

Note:

[1]: Panel Power VDD is 3.3V by default, 5V or 12V is selectable by “Panel VDD

Select Jumper”(JC_LVDS1, Location 12).

EX-92290-i Series

User Manual


Location Jumper Setting Function

JC_LVDS1

1-2(Default)

+ 3.3V

3-4

+ 5V

5-6

+ 12V


LVDS_P1

1 GND

2 GND

3 PWM_ADJ

4 LVDS_BKL_EN

5 + 12V

6 + 12V


P_SATA1

1 + 12V

2 GND

3 GND

4 + 5V


J_SIM1

1 UIM_PWR

2 GND

3 UIM_DAT

4 UIM_CLK

5 UIM_RST

6 UIM_VPP


SYS_FAN

1

GND

2

+ 12V

3

FAN Speed Detection


J_KBMS1

1 KB_CLK

2 KB_DATA

3 MS_CLK

4 GND

5 + 5V

6 MS_DATA

4.14 Panel VDD Select Jumper (3*2 Pin 2.54mm)

4.15 Panel Backlight Control Pin Header (6*1 Pin 2.00mm)

4.16 SATA Power Pin Headers (wafer 4*1 Pin 2.00mm)

4.17 SIM Card Pin Header (6*1 Pin 2.00mm)

4.18 System Fan Connector (3*1 Pin 2.54mm)

4.19 PS/2 Pin Header (wafer 6*1 Pin 2.0mm)

Documents

User’s Manual - admost manual of EX-92290_i... · Hardware Setup ... 8 BLUE_RTN 2.4. HDMI HDMI ... Intel® HD Graphics 620 / 610 (Kabylake) System Memory DDR3L-1333/1600; Up to