Copyright (C) 2008 Ushio Inc., All rights reserved.

FLS & DLSEngineered LED

Lighting Solutions by Ushio

FLS

LED Fiber Optic

Illumination System

DLS

LED Point Source

Illumination System

FLS –Fiber LED System by USHIO

FLS uses high intensity LED light engines to provide

even illumination for many different applications.

Applications include lighting channel letters,

backlighting, neon replacement, edge lighting,

cove lighting. The possibilities are endless.

FLS by USHIO

How does it work?• FLS generates a large amount of light in one spot and then spreads it out

using fiber optics.

• This leads to brighter, better illumination using less electricity.

Why is FLS better?

• One of the brightest and most uniform LED system on the market.

• Uses less power because there's far fewer LEDs involved.

• Easy to route fiber optic cable which means FLS goes places other LED systems can't.

FLS by USHIO

Easy To Install

The FLS system is light as a feather, so fasten it in. A

single engine can fully illuminate up to 3’ - 4' of fiber

depending on the color and current (up to 6’ if an

engine is attached on both ends). Just bend the fiber as

needed to fit.

* These are only examples of signs using the FLS system. The companies displayed on these

signs do not officially endorse the FLS system or Ushio products.

FLS by USHIO

Energy Efficient

Here’s a wattage comparison of the FLS Fiber LED

Solution and 2 common backlighting systems.

How is it different?Other products attach small LEDs to inflexible grids or strips.

FLS by USHIO

FLS – Fiber LED System LED String System

Features 4 Fiber LED modules and 2 strands of fiber

6 Light Engines and Fiber – Approx. 20 watts total

How is it different?

Competing products simply attach lots of small LEDs to inflexible grids or strips. But that produces dimmer light and wastes more energy.

DLS by USHIO

LED strings removed from sign

& replaced with FLS & DLS

LED String System Before Removing & Replacing With

FLS & DLS

HD Kitchen & Bath Sign using FLS

FLS by USHIO

Better Backlighting

Not only does the FLS System provide energy savings,

but the illumination is better.

NEON

FLS Fiber LED

* These are only examples of signs using the FLS system. The companies displayed on these

signs do not officially endorse the FLS system or Ushio products.

FLS & DLS by USHIO

• The patented FLS contains a high-intensity LED,

coupled to a heat-sink and an optical unit that focus

light into a fiber optic cable.

• Can also be used without the optic cables (DLS) as a

point light source for lighting large cabinet signs when

forward facing light is needed

Very Small & Lightweight

Copyright (C) 2008 Ushio Inc., All rights reserved.

DLS APPLICATIONS

DLS

LED Point Source

Illumination System

25 Sloan modules and 50 LED’s

6 DLS units

Sign with side reflectors

Sloan Led – 25 Led modules

DLS – 6 Units, approx. 20Watts

DLS – Bank of America Retrofit

DLS by USHIO

How does it work?

Each individual light engine contains a high power LED source that creates an efficient and bright source of light. Then there is an optical lens that is positioned over the LED to distribute and smooth out the source of light to provide illumination over a larger area. This leads to brighter, better illumination in a small package using less electricity.

Why is an DLS System better?

It’s simply a matter of scale. You are able to use far less DLS light engines and thus less energy to achieve the illumination levels desired. The DLS system is even more efficient than other LED systems.

DLS by USHIO

Easy To Install

The DLS system is compact, lightweight and easy to fasten. A single engine can fully illuminate up to 1 square foot of signage (depending on the depth of the sign). It’s also easy to install and position in other lighting applications that may have space limitations.

FLS & DLS by USHIO

System Approach:

These are engineered solutions and each project is

unique. In order to guarantee each project looks it’s

best Ushio provides project design & engineering

support.

The FLS & DLS Systems Includes: Light Engines, Fiber

Cable, Cable Caps, Reflective Material, Optical

Material, Power Supplies & Technical Support

Also available in a PAK. (Pre-assembled Kit)

FLS & DLS by USHIO

Powering The FLS & DLS SystemsUse Constant Current Drivers

FLS & DLS Light Engines are very sensitive to changes in current. Without these drivers, the light from our engines may appear to pulse as the current fluctuates. You may also shorten the lifespan of the embedded LED.

Voltage & Wiring

Each light engine has a forward voltage slightly less than 4V. So, a driver listed as 12-24 volts can power 3 to 6 light engines.

FLS & DLS by USHIO

Fully Tested

FLS Fiber LED Systems and DLS Direct LED Systems are UL listed and certified for use in damp or wet outdoor environments. They‘re also in the UL's Sign Components Manual (E318039). Finally, the entire system has been tested according to MIL-STD-810 and ASTM standards, which include exposure to high/low temperatures, salt, fog and UV radiation.