Embed Size (px)
Citation preview
www.pdcvalve.com
www.pdcvalve.com
1075 Montour West Industrial ParkCoraopolis, PA 15108 USA
P: 1.800.PDC.4070 | 724.695.3440 F: 724.695.8635 • E : [email protected]
The above Valve Selection Chart is to be used as a general guide. Always verify your application with the factory.
VALVE SELECTION CHART
ServiceExcel
Series 40 Medium Duty
Series 01Reduced Port
Series 15Econotrol Series 09
Thread End Series 07
Elastomer Lined Series 27
Flanged Series 39
Temperature
250°F • • • • • • •450°F Max • • • • •900°F Max • • •
1500°F Max (depends on Valve Size) • Media
Clean Air • • • • • • •Dirty Air • • •
Traces of H₂O • •Gases • • • • • • •
Liquids • • • • • • • Operation
Manual • • • • • • •Automation • • • • • • •
Cycle
Low (10-100K) • • • • • • •Medium (100K-500K) • • • •
High (500K-1M) • • Seat Type
Swing Thru - ANSI Class 1 • • • • • •Metal Step Seat - ANSI Class 2/3 • • •
Tadpole Seat - ANSI Class 3/4 • • •Angle Seat - ANSI Class 2/3 • • • •
Elastomer Seat - Bubble Tight • • Valve Options
Coatings (Plating, Epoxy etc.) • • • • • • •Grease Fittings • • • •
Live Loaded Packing • • •Idle End Thrust Plate (for Vertical Mount)
•Idle End Outboard Bearing •
Power End Outboard Bearing • • • • • • •
Process Development & Control LLC is a leading manufacturer of industrial butterfly damper valves for HVAC, furnace, power, blower and exhaust air transfer systems, in addition to special service applications. PDC offers customers a wide variety of materials for construction options and design specifications. Our experience in design and fabrication of quality valves has gained worldwide customer acceptance.
PDC's Experienced Engineering Team can refine your design criteria and fulfill your individual requirements. Our staff ensures the Best Quality and Product Design Integrity, utilizing the latest tools such as our 3 Dimensional Computer-Aided Design Software.
DISTRIBUTED BY:
BUTTERFLY DAMPER VALVES AND CONTROLS
Control Valves for Today’s Industries
PDC butterfly damper valves are used in varying-pressure and -temperature manufacturing and processing environments where control of air, liquids or gases is essential to maintaining successful operations – Blowers, Boilers, Burners, Furnaces, Compressors, and Environmental Controls. CAD ensures that quality, safety and integrity are designed into every valve.
AIS COMPLIANCEPDC is pleased to supply products that are in compliance with “American Iron and Steel (AIS)” provided that the AIS compliance requirement is made known to PDC during the quoting and ordering processes.
17763 - PDC Butterfly Valve - Bro- V6-(F).indd 1 8/14/17 9:00 AM
Econotrol Series 09 Thread End Series 07 Medium Duty Series 01 Flanged End Series 39 Excel Series 40
Size Range 2" to 14" 1" to 4" 2" to 24" 4" to 14" 2" to 60"
Flange Mating 125/150 LB ANSI N.P.T. Female Threads125/150 LB ANSI, R.P.M also
Available125/150 LB ANSI
125/150 LB ANSI, R.P.M also Available
Pressure Max 150 PSI to 30 PSI
depending on Valve Size5 PSI Differential, 25 PSI
Containment150 PSI to 30 PSI depending
on Valve Size125 PSI to 30 PSI
depending on Valve Size150 PSI to 30 PSI
depending on Valve Size
Temperature Max
450°F 300°F 900°F 450°F1500°F with Construction Options Consult Factory
Available Construction
Cast Iron, Carbon Steel, Stainless Steel
Cast IronCast Iron, High Temperature
Iron, Carbon Steel, Stainless Steel
Cast Iron, Carbon Steel, Stainless Steel
Cast Iron, High Temperature Iron, Carbon Steel, Stainless
Steel
Seating Design Swing Thru Angle, Swing ThruSwing Thru, Angle, Step Seat, Tadpole (6" MIN)
Swing Thru, AngleSwing Thru, Angle, Step Seat, Tadpole (6" MIN)
ActuationPDC Specification or
Customer SpecificationPDC Specification or
Customer SpecificationPDC Specification or
Customer SpecificationPDC Specification or
Customer SpecificationPDC Specification or
Customer Specification
ApplicationsLiquids, Gases &
Semi-Solids refer to back cover
Gases refer to back cover
Liquids, Gases, Exhaust Fumes & Semi-Solids
refer to back cover
Liquids, Gases & Semi-Solids refer to back cover
Liquids, Gases, Exhaust Fumes & Semi-Solids
refer to back cover
Complete DataVisit PDCvalve.com see
"Econotrol Series 09" for more details
Visit PDCvalve.com see "Thread End Series 07"
for more details
Visit PDCvalve.com see "Medium Duty Series 01"
for more details
Visit PDCvalve.com see "Flanged End Series 39"
for more details
Visit PDCvalve.com see "Excel Series 40" for
more details
Reduced Port Series 15 Elastomer Lined Series 27 Combustion Series 22 Custom Valves Actuation
3" to 14" 2" to 36" 2" to 14" 2" to 60" 1" to 60"
125/150 LB ANSI, R.P.M also Available
125/150 LB ANSI 125/150 LB ANSI Per Customer SpecificationManual: Locking Levers, Gearboxes–Handwheels
or Chainwheels
150 PSI to 30 PSI depending on Valve Size
250 PSIG WOG (2" to 12") - 150 PSIG WOG (14" to 36")
2 PSI Per Customer SpecificationAutomation:
Pneumatic: Rotary, Diaphragm, Lineal Stroke
Electric: Rotary, Lineal Stroke
Hydraulic: Rotary, Lineal Stroke
900°F 300°F450°F Standard
Construction 900°F Optional Construction
Per Customer Specification
Cast Iron, High Temperature Iron, Carbon Steel,
Stainless Steel
Cast Iron, Carbon Steel, Stain-less Steel
Cast Iron Per Customer Specification
Swing Thru, Angle, Step Seat, Tadpole (6" MIN)
Elastomer Shut-Off Swing ThruSwing Thru, Angle, Step Seat,
Tadpole (6" MIN)
PDC Specification or Customer Specification
PDC Specification or Customer Specification
ManualPDC Specification or
Customer Specification
Accessories: Positioners, Limit Switches, Solenoids,
Speed Controls
Liquids, Gases, Exhaust Fumes & Semi-Solids
refer to back cover
Liquids, Gases & Semi-Solids refer to back cover
Trim Valve Per Customer Specification
Visit PDCvalve.com see "Reduced Port Series 15"
for more details
Visit PDCvalve.com see "Elastomer Lined Series 27"
for more details
Visit PDCvalve.com see "Combustion Series 22"
for more details
Visit PDCvalve.com see "Custom Valves" or more details
www.pdcvalve.com www.pdcvalve.com
BUTTERFLY DAMPER VALVES SELECTION GUIDE More detailed product information is available on our website: www.pdcvalve.com
17763 - PDC Butterfly Valve - Bro- V6-(F).indd 2 8/14/17 9:00 AM
Econotrol Series 09 Thread End Series 07 Medium Duty Series 01 Flanged End Series 39 Excel Series 40
Size Range 2" to 14" 1" to 4" 2" to 24" 4" to 14" 2" to 60"
Flange Mating 125/150 LB ANSI N.P.T. Female Threads125/150 LB ANSI, R.P.M also
Available125/150 LB ANSI
125/150 LB ANSI, R.P.M also Available
Pressure Max 150 PSI to 30 PSI
depending on Valve Size5 PSI Differential, 25 PSI
Containment150 PSI to 30 PSI depending
on Valve Size125 PSI to 30 PSI
depending on Valve Size150 PSI to 30 PSI
depending on Valve Size
Temperature Max
450°F 300°F 900°F 450°F1500°F with Construction Options Consult Factory
Available Construction
Cast Iron, Carbon Steel, Stainless Steel
Cast IronCast Iron, High Temperature
Iron, Carbon Steel, Stainless Steel
Cast Iron, Carbon Steel, Stainless Steel
Cast Iron, High Temperature Iron, Carbon Steel, Stainless
Steel
Seating Design Swing Thru Angle, Swing ThruSwing Thru, Angle, Step Seat, Tadpole (6" MIN)
Swing Thru, AngleSwing Thru, Angle, Step Seat, Tadpole (6" MIN)
ActuationPDC Specification or
Customer SpecificationPDC Specification or
Customer SpecificationPDC Specification or
Customer SpecificationPDC Specification or
Customer SpecificationPDC Specification or
Customer Specification
ApplicationsLiquids, Gases &
Semi-Solids refer to back cover
Gases refer to back cover
Liquids, Gases, Exhaust Fumes & Semi-Solids
refer to back cover
Liquids, Gases & Semi-Solids refer to back cover
Liquids, Gases, Exhaust Fumes & Semi-Solids
refer to back cover
Complete DataVisit PDCvalve.com see
"Econotrol Series 09" for more details
Visit PDCvalve.com see "Thread End Series 07"
for more details
Visit PDCvalve.com see "Medium Duty Series 01"
for more details
Visit PDCvalve.com see "Flanged End Series 39"
for more details
Visit PDCvalve.com see "Excel Series 40" for
more details
Reduced Port Series 15 Elastomer Lined Series 27 Combustion Series 22 Custom Valves Actuation
3" to 14" 2" to 36" 2" to 14" 2" to 60" 1" to 60"
125/150 LB ANSI, R.P.M also Available
125/150 LB ANSI 125/150 LB ANSI Per Customer SpecificationManual: Locking Levers, Gearboxes–Handwheels
or Chainwheels
150 PSI to 30 PSI depending on Valve Size
250 PSIG WOG (2" to 12") - 150 PSIG WOG (14" to 36")
2 PSI Per Customer SpecificationAutomation:
Pneumatic: Rotary, Diaphragm, Lineal Stroke
Electric: Rotary, Lineal Stroke
Hydraulic: Rotary, Lineal Stroke
900°F 300°F450°F Standard
Construction 900°F Optional Construction
Per Customer Specification
Cast Iron, High Temperature Iron, Carbon Steel,
Stainless Steel
Cast Iron, Carbon Steel, Stain-less Steel
Cast Iron Per Customer Specification
Swing Thru, Angle, Step Seat, Tadpole (6" MIN)
Elastomer Shut-Off Swing ThruSwing Thru, Angle, Step Seat,
Tadpole (6" MIN)
PDC Specification or Customer Specification
PDC Specification or Customer Specification
ManualPDC Specification or
Customer Specification
Accessories: Positioners, Limit Switches, Solenoids,
Speed Controls
Liquids, Gases, Exhaust Fumes & Semi-Solids
refer to back cover
Liquids, Gases & Semi-Solids refer to back cover
Trim Valve Per Customer Specification
Visit PDCvalve.com see "Reduced Port Series 15"
for more details
Visit PDCvalve.com see "Elastomer Lined Series 27"
for more details
Visit PDCvalve.com see "Combustion Series 22"
for more details
Visit PDCvalve.com see "Custom Valves" or more details
www.pdcvalve.com www.pdcvalve.com
BUTTERFLY DAMPER VALVES SELECTION GUIDE More detailed product information is available on our website: www.pdcvalve.com
17763 - PDC Butterfly Valve - Bro- V6-(F).indd 2 8/14/17 9:00 AM
www.pdcvalve.com
www.pdcvalve.com
1075 Montour West Industrial ParkCoraopolis, PA 15108 USA
P: 1.800.PDC.4070 | 724.695.3440 F: 724.695.8635 • E : [email protected]
The above Valve Selection Chart is to be used as a general guide. Always verify your application with the factory.
VALVE SELECTION CHART
ServiceExcel
Series 40 Medium Duty
Series 01Reduced Port
Series 15Econotrol Series 09
Thread End Series 07
Elastomer Lined Series 27
Flanged Series 39
Temperature
250°F • • • • • • •450°F Max • • • • •900°F Max • • •
1500°F Max (depends on Valve Size) • Media
Clean Air • • • • • • •Dirty Air • • •
Traces of H₂O • •Gases • • • • • • •
Liquids • • • • • • • Operation
Manual • • • • • • •Automation • • • • • • •
Cycle
Low (10-100K) • • • • • • •Medium (100K-500K) • • • •
High (500K-1M) • • Seat Type
Swing Thru - ANSI Class 1 • • • • • •Metal Step Seat - ANSI Class 2/3 • • •
Tadpole Seat - ANSI Class 3/4 • • •Angle Seat - ANSI Class 2/3 • • • •
Elastomer Seat - Bubble Tight • • Valve Options
Coatings (Plating, Epoxy etc.) • • • • • • •Grease Fittings • • • •
Live Loaded Packing • • •Idle End Thrust Plate (for Vertical Mount)
•Idle End Outboard Bearing •
Power End Outboard Bearing • • • • • • •
Process Development & Control LLC is a leading manufacturer of industrial butterfly damper valves for HVAC, furnace, power, blower and exhaust air transfer systems, in addition to special service applications. PDC offers customers a wide variety of materials for construction options and design specifications. Our experience in design and fabrication of quality valves has gained worldwide customer acceptance.
PDC's Experienced Engineering Team can refine your design criteria and fulfill your individual requirements. Our staff ensures the Best Quality and Product Design Integrity, utilizing the latest tools such as our 3 Dimensional Computer-Aided Design Software.
DISTRIBUTED BY:
BUTTERFLY DAMPER VALVES AND CONTROLS
Control Valves for Today’s Industries
PDC butterfly damper valves are used in varying-pressure and -temperature manufacturing and processing environments where control of air, liquids or gases is essential to maintaining successful operations – Blowers, Boilers, Burners, Furnaces, Compressors, and Environmental Controls. CAD ensures that quality, safety and integrity are designed into every valve.
AIS COMPLIANCEPDC is pleased to supply products that are in compliance with “American Iron and Steel (AIS)” provided that the AIS compliance requirement is made known to PDC during the quoting and ordering processes.
17763 - PDC Butterfly Valve - Bro- V6-(F).indd 1 8/14/17 9:00 AM
![Hydrodynamic calculation Butterfly valve (lenticular disc) [EN] calculation Butterfly valve... · Hydrodynamic calculation Butterfly valve (lenticular disc)!=0,262’ (=1,15’ Fig.1](https://img.pdfslide.net/doc/110x75/5e4d4893a5620b2b3175568a/hydrodynamic-calculation-butterfly-valve-lenticular-disc-en-calculation-butterfly.jpg)
