Upload
others
View
2
Download
0
Embed Size (px)
Citation preview
Valves
Valves Range 1120 Gate Valve Handwheel – PN20 Light Pattern
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Handwheel version: 1120 - 1/2" - 2" No Component Material Specification
1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Material Specification
Valves Valves Range: 1120 Gate Valve Handwheel – PN20 Light Pattern
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1120 x 3 3 3 x x x x x
Valve Suitability
Specification Clause:Brass Gate Valve designed in accordance with BS EN 12288.
Non-rising stem.
Handwheel operated.
Threaded bonnet.
One piece wedge.
Taper threaded BS EN 10226 (ISO 7-1) or parallel threaded to ISO228.
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100
0 30 60 90 120 150 180 210
1120 Temp (°C) bar psi
Water -10°C to + 100°C PN20
Max. working parameters
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Inside screw pattern with non rising stem.
• Designed in accordance with WRAS requirements .
• Designed in accordance with BS EN 12288.
• High quality brass construction.
• Not suitable for high temperature working.
• Threads to BS EN 10226 (ISO7).
• Available with ISO228 thread to order.
• Unique Conex handwheel.
Gate Valve - 1120
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112010RRW200404 1/2" 15 48 70 0.25112010RRW200606 3/4" 20 50 80 0.39 112010RRW200808 1" 25 60 90 0.58 112010RRW201010 11/4" 32 64 115 0.98 112010RRW201212 11/2" 40 69 125 1.10 112010RRW201616 2" 50 81 155 1.80
Valves
B
121110293481756
1413
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Handwheel version: 1001 - 15-54mm
No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6 13 Compression Ring Brass BS 2872 CZ107 14 Compression nut Brass BS EN 12165 CW617N-DW
Valves Range 1001 Gate Valve Handwheel PN16 – Compression Material Specification
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Valves Valves Range: 1001 Gate Valve Handwheel PN16 – Compression
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1001 x 3 3 x x x x x x
Valve Suitability
Specification Clause:Brass Gate Valve designed in accordance with BS EN 12288.
Non-rising stem.
Handwheel operated.
Threaded bonnet.
One piece wedge.
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100
0 30 60 90 120 150 180 210
1001 Temp (°C) bar psi Water -10°C to + 100°C PN16
Max. working parameters
Features and Benefits:
• Inside screw pattern with non rising stem.
• Designed in accordance with WRAS requirements.
• Designed in accordance with BS EN 12288.
• High quality brass construction.
• Not suitable for high temperature working.
• Unique Conex handwheel.
Gate Valve - 1001
Order Code Size DN A BWeight
(kg)
100110CCW16E-E- 15 48 85100110CCW16G-G- 22 53 98100110CCW16H-H- 28 66 105100110CCW16J-J- 35 68 122.5100110CCW16K-K- 42 72 145.7100110CCW16N-N- 54 92 170
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Lock Shield version: 1001 - 15-54mm 1121 - 1/2" - 4"
No Component Material Specification 1 Stem Bronze BS EN 1982 CC491K 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Bronze BS EN 1982 CC491K 5 Body Bronze BS EN 1982 CC491K 6 Wedge Bronze BS EN 1982 CC491K 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW602N 9 Ferrule Brass BS EN 12164 CW614N
Valves Range 1121 Gate Valve Lock Shield PN20 (Bronze)
Material Specification
Valves Valves Range: 1121 Gate Valve Lock Shield PN20 (Bronze)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1121 3 3 3 3 x x x x x
Valve Suitability
1121 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:Bronze Gate Valve designed in accordance with DIN 50930-6 CC499K.
Bronze non-rising stem.
Lockshield key operated.
Bronze threaded bonnet.
Bronze one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
Suitable for use with LTHW and chilled systems.
Kite marked.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Designed in accordance with WRAS requirements.
• Designed in accordance with DIN 50930-6 CC499K.
• Lock shield key available.
• Threads in accordance with BS EN 10226 (ISO7).
• Suitable for use with LTHW and chilled systems.
Gate Valve - 1121
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112120RRK200404 1/2" 15 55 85 0.32112120RRK200606 3/4" 20 60 95 0.414112120RRK200808 1" 25 65 110 0.63112120RRK201010 1 1/4" 32 75 125 1.03112120RRK201212 1 1/2" 40 80 145 1.40112120RRK201616 2" 50 90 170 1.94112120RRK202020 2 1/2" 65 100 - -112120RRK202424 3" 80 115 - -112120RRK203232 4" 100 135 - -
Valves
Valves Range 1121 Gate Valve Handwheel PN20 (Bronze)
Material Specification
Handwheel version: 1121 - 1/2" - 4"
No Component Material Specification 1 Stem Bronze BS EN 1982 CC491K 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Bronze BS EN 1982 CC491K 5 Body Bronze BS EN 1982 CC491K 6 Wedge Bronze BS EN 1982 CC491K 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Valves Range: 1121 Gate Valve Handwheel PN20 (Bronze)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1121 3 3 3 3 x x x x x
Valve Suitability
1121 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:Bronze Gate Valve designed in accordance with DIN 50930-6 CC499K.
Bronze non-rising stem.
Handwheel operated.
Bronze threaded bonnet.
Bronze one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
Kite marked.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Robust Construction ensures reliable in-process service.
• Designed in accordance with WRAS requirements.
• Designed in accordance with DIN 50930-6 CC499K.
• Threads in accordance with BS EN 10226 (ISO7).
• Suitable for use with LTHW and chilled systems.
Gate Valve - 1121
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112120RRW200404 1/2" 15 55 85 0.28112120RRW200606 3/4" 20 60 95 0.41112120RRW200808 1" 25 70 115 0.60112120RRW201010 1 1/4" 32 75 125 1.01112120RRW201212 1 1/2" 40 80 145 1.35112120RRW201616 2" 50 90 165 1.90112120RRW202020 2 1/2" 65 100 210 -112120RRW202424 3" 80 115 240 -112120RRW203232 4" 100 135 290 -
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1122 Gate Valve Handwheel PN20 (Brass)
Material Specification
Handwheel version: 1122 - 1/2" - 4"
No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12165 CW617N-DW 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Valves Valves Range: 1122 Gate Valve Handwheel PN20 (Brass)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1122 3 3 3 3 x x x x x
Valve Suitability
1122 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:Brass Gate Valve designed in accordance with BS EN 12288.
Non-rising stem.
Handwheel operated.
Threaded bonnet.
One piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
Kite marked.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Inside screw pattern with non rising stem.
• Designed in accordance with WRAS requirements.
• Designed in accordance with BS EN 12288.
• Robust design minimising pressure drop.
• High quality brass construction.
• Threads to BS EN 10226 (ISO7).
• Available with ISO228 thread.
Gate Valve - 1122
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112210RRW200404 1/2" 15 55 85 0.26
112210RRW200606 3/4" 20 60 95 0.40
112210RRW200808 1" 25 70 115 0.57112210RRW201010 1 1/4 32 75 125 0.96112210RRW201212 1 1/2" 40 80 145 1.13112210RRW201616 2" 50 90 165 1.81112210RRW202020 2 1/2" 65 100 210112210RRW202424 3" 80 115 240112210RRW203232 4" 100 135 290
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1122 Gate Valve Lock Shield PN20 (Brass)
Material Specification
Lock Shield version: 1122 - 1/2" - 4"
No Component Material Specification 1 Stem Brass BS EN 12165 CW617N-DW 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Brass BS EN 12165 CW617N-DW 5 Body Brass BS EN 12165 CW617N-DW 6 Wedge Brass BS EN 12165 CW617N-DW 7 Seal PTFE PTFE 8 Stem Retainer Brass BS EN 12165 CW617N-DW 9 Ferrule Brass BS EN 12164 CW614N
Valves Valves Range: 1122 Gate Valve Lock Shield PN20 (Brass)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1122 3 3 3 3 x x x x x
Valve Suitability
1122 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:Brass Gate Valve designed in accordance with BS EN 12288.
Brass non-rising stem.
Lockshield key operated.
Brass threaded bonnet.
Brass one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
Kite marked.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Designed in accordance with WRAS requirements.
• Inside screen pattern with non rising stem.
• Lock shield key available.
• Designed in accordance with BS EN 12288.
• Threads in accordance with BS EN 10226 (ISO7).
Gate Valve - 1122
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112210RRK200404 1/2" 15 55 85 0.26112210RRK200606 3/4" 20 60 95 0.40112210RRK200808 1" 25 65 110 0.57112210RRK201010 1 1/4" 32 75 125 0.95112210RRK201212 1 1/2" 40 80 145 1.12112210RRK201616 2" 50 90 170 1.80112210RRK202020 2 1/2" 65 100112210RRK202424 3" 80 115112210RRK203232 4" 100 135
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1124 Gate Valve Handwheel PN20 (DZR)
Material Specification
Handwheel version: 1124 - 1/2" - 4"
No Component Material Specification 1 Stem DZR Brass BS EN 12164 CW602N 2 Packing Nut Brass BS EN 12165 CW617N 3 Packing PTFE PTFE 4 Bonnet DZR Brass BS EN 12164 CW602N 5 Body DZR Brass BS EN 12164 CW602N 6 Wedge DZR Brass BS EN 12164 CW602N 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Valves Valves Range: 1124 Gate Valve Handwheel PN20 (DZR)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1124 3 3 3 3 x x x x x
Valve Suitability
1124 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:DZR Brass Gate Valve designed in accordance with BS EN 12288.
DZR non-rising stem.
Handwheel operated.
DZR Brass threaded bonnet.
DZR Brass one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Designed in accordance with WRAS requirements.
• Dezincification resistant brass construction .
• Lock shield key available.
• Limits fungal growth and reduces system corrosion.
• Designed in accordance with BS EN 12288.
• Threads in accordance with BS EN 10226 (ISO7).
• Suitable for use with LTHW and chilled systems.
Gate Valve - 1124
Order Code
BS EN 10226 (ISO 07) threadSize DN A B
Weight (kg)
112450RRW200404 1/2" 15 55 85 0.28112450RRW200606 3/4" 20 60 95 0.41112450RRW20080 1" 25 65 115 0.61
112450RRW201010 11/4" 32 75 125 1.01112450RRW201212 11/2" 40 80 145 1.16112450RRW201616 2" 50 90 165 1.90112450RRW202020 2 ½" 65 100 210 -112450RRW202424 3" 80 115 240 -112450RRW203232 4" 100 135 290 -
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1124 Gate Valve Lock Shield PN20 (DZR)
Material Specification
Lock Shield version: 1124- 1/2" - 4"
No Component Material Specification 1 Stem DZR Brass BS EN 12164 CW602N 2 Packing Nut Brass BS EN 12165 CW602N 3 Packing PTFE PTFE 4 Bonnet DZR Brass BS EN 12164 CW602N 5 Body DZR Brass BS EN 12164 CW602N 6 Wedge DZR Brass BS EN 12164 CW602N 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Ferrule Brass BS EN 12164 CW614N
Valves Valves Range: 1124 Gate Valve Lock Shield PN20 (DZR)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1124 3 3 3 3 x x x x x
Valve Suitability
1124 Temp (°C) bar psi Water -10°C to + 100°C PN20 at 186°C PN9
Max. working parameters
Specification Clause:DZR Brass Gate Valve designed in accordance with BS EN 12288.
DZR Brass non-rising stem.
Lockshield key operated.
DZR threaded bonnet.
DZR one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
9
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Non-rising stem design.
• Designed in accordance with WRAS requirements.
• Designed in accordance with BS EN 12288.
• Dezincification resistant brass prevents system corrosion and reduces fungal growth.
• Threads in accordance with BS EN 10226 (ISO7).
• Suitable for use with LTHW and chilled systems.
Gate Valve - 1124
Order Code
BS EN 10226 (ISO 7) taper thread
Size DN A BWeight
(kg)
112450RRK200404 1/2" 15 55 85 0.26112450RRK200606 3/4" 20 60 95 0.40112450RRK200808 1" 25 65 110 0.57112450RRK201010 11/4" 32 75 125 0.96112450RRK201212 11/2" 40 80 145 1.13112450RRK201616 2" 50 90 170 1.81112450RRK202020 2 ½" 65 100 - -112450RRK202424 3" 80 115 - -112450RRK203232 4" 100 135 - -
Valves
Gate Valves are designed for services that only need infrequent operation, where the gate is maintained at either fully open or fully closed. They should not be used for throttling the flow of fluid.
Valves Range 1126 Gate Valve Handwheel PN32 (Bronze)
Material Specification
Handwheel version: 1126 - 1/2" - 4"
No Component Material Specification 1 Stem Bronze BS EN 1982 CC491K 2 Packing Nut Brass BS EN 12165 CW617N-DW 3 Packing PTFE PTFE 4 Bonnet Bronze BS EN 1982 CC491K 5 Body Bronze BS EN 1982 CC491K 6 Wedge Bronze BS EN 1982 CC491K 7 Seal PTFE PTFE 8 Stem Retainer DZR Brass BS EN 12164 CW602N 9 Packing Ring Brass BS EN 12165 CW617N-DW 10 Handwheel Aluminium EN 1706 LM6 11 Handwheel Nut Brass BS EN 12164 CW614N 12 Identity Disc Aluminium EN 1706 LM6
Valves Valves Range: 1126 Gate Valve Handwheel PN32 (Bronze)
Product Steam Water Drinking Oil Air Gas Gas Gas Gas Water (Inert) (Combustible) (Corrosive) (Oxygen) 1126 3 3 3 3 x x x x x
Valve Suitability
1126 Temp (°C) bar psi Water -10°C to + 100°C PN32 at 186°C PN14
Max. working parameters
Specification Clause:Bronze Gate Valve designed in accordance with DIN 50930-6 CC499K.
Bronze non-rising stem.
Handwheel operated.
Bronze threaded bonnet.
Bronze one piece wedge.
Taper threaded BS EN 10226 (ISO 7-1).
Approved for potable water systems.
36
32
28
24
20
16
12
8
4
0
Pre
ssur
e B
ar
Temperature oC100 186
0 30 60 90 120 150 180 210
14
This is a representation of the full range from Conex Universal. IBP trade marks are registered in numerous countries.
Features and Benefits:
• Designed in accordance with WRAS requirements.
• High quality bronze construction suitable for pressure of up to 32 bar.
• Designed in accordance with DIN 50930-6 CC499K.
• Threads according to BS EN 10226.
• Suitable for use with LTHW and chilled systems.
Gate Valve - 1126
Order Code
BS EN 10226 (ISO 7) threadSize DN A B
Weight (kg)
112620RRW320404 1/2" 15 55 85 0.36112620RRW320606 3/4" 20 60 95 0.69112620RRW320808 1" 25 70 115 1.02112620RRW321010 1 1/4" 32 75 125 1.57112620RRW321212 1 1/2" 40 80 145 2.44112620RRW321616 2" 50 90 165 3.43112620RRW322020 2 1/2" 65 100 210 -112620RRW322424 3" 80 115 240 -112620RRW323232 4" 100 135 290 -