Information Technology Solutions
Vatral 125/150 Fire Protection Mortar has been developed
especially for ship construction, with excellently combined fire
protecting, heat insulating and acoustic properties.
USCG-Certificate No.:
164.109/EC0736/107.087
ADDITIONAL NOTES Small amounts of the binding material evaporate
at temperatures higher than 150C. The specifications on the safety
data sheet have to be observed. More data in the safety data sheet
are to be concerned
Vatral 125/150: Fire Protection Mortar
TECHNICAL DATA
Density: Approx. 125 kg/m
Colour: Light Grey
Fire behavior Not flammable According to IMO FTPC Part 1
EC- Type Examination Certificate (Module B) Certificate No.:
107.081 Module D Certificate -No. SEE 11068
Measured value: heat conductivity
0.040 W/mK According to DIN EN 12667
Temperature of application:
150C
VATRAL Innovative Fire, Heat & Sound Insulation
VatraTech Solution Sdn. Bhd.|No.6, Jln TIAJ 2/9, Taman Industri
Alam Jaya, 42300 Bandar Puncak Alam, Selangor Malaysia |
www.vatratech.com | [email protected]
PRODUCT DESCRIPTION
Vatral 125/150 Fire Protection Mortar is used for ship
construction.
APPLICATION
The mortar is ready to use. Before processing, stir the mortar
slowly and thoroughly, do not dilute it! It may be processed with
steel spatulas. The area to be treated has to be clean, dry,
dust-free, and grease-free. During processing, the room temperature
must not be lower than 5C. After drying, the mortar can be grinded,
drilled and cut. The completed shaped parts harden at room
temperature, but can be hardened in ovens as well.
PROCESSING DIRECTIONS
Vatral 125/150 Fire Protection Mortar stored and transported
dry, cool, but frost-free and sealed. Seal open containers
properly. Under dry conditions non-opened containers can be stored
for 6 months. The storage and transport temperature must not be
lower than 5C
STORAGE & TRANSPORT
Ready for use in plastic containers: 2.5; 10.0 Litres
DELIVERY FORM
