Embed Size (px)
Citation preview
VENA® SIL 630TRANSPARENT WIRE-REINFORCED SILICONE HOSE
www.venair.com
TECHNICAL SPECIFICATIONS
Vena® Sil 630 is manufactured with transparent platinum-cured silicone. It is reinforced with a stainless steel wire spiral.The high transparency of the hose allows a perfect visualization of the conveyed product.
The product complies with FDA, USP Class VI and BfR Standard part XV regulations, making it perfect for the transfer of liquids and semi-liquids at low pressure in the food, cosmetic, chemical and pharmaceutical industries.
Vena® Sil 630 has the greater flexibility of the range, with very tight bending radius.
The operating temperature range is -60ºC to 180ºC (-76ºF to 356ºF).
®
TECHNICAL INFORMATION
Offices
Distributor:
North America
United States [email protected] T. +1 305 362 8920
South America [email protected]. +33 437 85 08 60
Asia China - [email protected] T. +86 021-3868 8806
China - [email protected] T. +86 010-5982 2451
[email protected]. +91 804 901 6515
[email protected] T. +84 837 700 360
Europe [email protected] T. +49 07141 9748653
[email protected]. +34 93 786 4860
[email protected]. +33 437 85 08 60
Italy [email protected] T. +39 0131 243903
United [email protected]. +44 0141 952 4943
[email protected].+41 044 267 17 96
[email protected]. +48 616 792 487
IMPORTANT:It is the user’s responsibility to ensure the suitability and safety of the VENAIR products for all intended uses. All the tests must be conducted in accordance with applicable regulatory requirements in order to determine the safety and effectiveness for use of the hoses in any particular application. Limited Warranty: For a period of 6 months from the date of sale, VENAIR warrants this product to be free from defects in materials and workmanship. Our only obligation will be to replace any portion proving defective, or at our option, to refund the purchase price thereof. User assumes all other risk, if any, including the risk of injury, loss or damage, direct or consequential, arising out of the use,misuse, or inability to use, this product. THIS WARRANTY IS IN LIEU OF THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED. No deviation is authorized. VENAIR assumes no obligations or liability for any advice furnished by it, or for results obtained with respect to those products. All such advice is given and accepted at the buyer’s risk.
Venair, Vena and its logotypes are registered trademarks of Venair Ibérica, S.A.
www.venair.comCAT 52 REV 00 EN
Copyright 2014 | Venair Group | All Rights Reserved
Ø Int Wall thicknessWorking Pressure*
ISO 1402/2009Bursting Pressure
ISO 1402/2009Bending RadiusISO 1746/2000
mm inch +1/-0.5mm +0.04/-0.02’’ Bar at 20ºC Psi at 68ºF Bar at 20ºC Psi at 68ºF mm ft
25 1 5,70 0,22 3,90 56,55 15,7 227,1 121 0,40
32 1 1/4 5,70 0,22 3,36 48,72 14,6 211,4 137 0,45
38 1 1/2 5,70 0,22 3,14 45,59 14,0 202,3 163 0,54
51 2 5,70 0,22 2,40 34,80 12,1 174,9 238 0,78
63 2 1/2 5,70 0,22 2,24 32,54 11,1 160,5 337 1,11
76 3 5,70 0,22 1,78 25,75 9,5 138,3 491 1,61
102 4 5,70 0,22 1,00 14,50 6,7 96,6 985 3,23
* At the indicated working pressure, the hose may experience an elongation up to 20%
