VERTICAL ELECTRIC PUMPS

www.JameswayFarmEq.com

Jamesway electric manure pumps are designed for rugged dependability and minimum maintenance. From heavy-duty steel construction to quality components, Jamesway pumps are built for the job. They’re loaded with features that make them convenient to operate and easy to service. With a choice of many models and a wide variety of options, Jamesway manure pumps can be set up exactly to your needs.

When you’re looking for a reliable, high quality machine to handle your manure pumping requirements, look no further than a Jamesway manure pump to deliver the performance you want. All products are supported by an extensive dealer network that services what they sell.

RELIABLE AND EFFECTIVE SYSTEMS

Powerful and reliable performance has made Jamesway pumps the first choice at high-demand operations.

www.JameswayFarmEq.com

5 HPelectricmotor

Oil-filled drive tube& bearing assembly

4’ thru 18’ models

Mounting bracket

included

6” & 8” VERTICAL ELECTRIC PUMPSThese electric manure transfer pumps are designed to agitate and pump milking parlor wastewater and hog manure with fast results. The lower agitation nozzle will quickly agitate a small to medium-sized reception pit and will transfer manure through a 4” PVC pipe up to several hundred feet (depending on elevation).

The 6” diameter impeller can agitate liquid at a rate of up to 480 GPM with a 5 HP electric motor. An oil-filled lower bearing assembly, with greasable seals, insures a long operating life. The 6” manure transfer pump is available in 4’ - 18’ lengths.

6” VERTICAL PUMP

Actual pump performance may vary depending on manure consistency.

7-1/2 or 10 HPelectric motor

Oil-filled drive tube& bearing assembly

4’ thru 18’ models

Agitationnozzlerotates

270 degrees

Mounting bracket

included

8” VERTICAL PUMPThe 8” diameter impeller and belt drive makes this pump a great choice for more demanding wastewater pumping and for hog manure.

Agitationnozzlerotates

270o

degrees

Remotegrease linefor lower

seals

The 12” and 16” electric manure transfer pumps are designed to agitate and pump out manure reception pits with minimum hassle and maximum performance. Available in lengths from 12’ to 16’, and equipped with a 12” or 16” diameter impeller, our manure pumps can be equipped with a wide variety of electric motors (7.5-40 HP) to get the job done fast and easy.

Standard equipment includes twin agitation nozzles that rotate 270 degrees, and a reliable triple sealed oil-bath lower bearing chamber. Choose from a sliding stationary mounting bracket that allows for fast, easy installation and servicing or an economical floor mount bracket.

6’ thru 16’ models

Oil-filledbearing assembly

Optional gearbox

lift

12” or 16”heavy-duty

boltedimpeller

7.5 - 40 HPelectric motors

6” discharge

12” & 16” VERTICAL ELECTRIC PUMPS

The lower bearing assembly features an oil

bath bearing chamber and a 2-1/4” dia. shaft with tapered roller bearings and triple seals for long

operating life.

Choice of Floor Mount or Slide & Tilt Mount. The Slide & Tilt mount may be equipped with a Lifting Hoist for use with a

heavy duty drill, or with a Power Lift with electric motor.

Oil reservoir and remote grease lines

to lower chamber

Actual pump performance may vary depending on manure consistency.

www.JameswayFarmEq.com

20” VERTICAL ELECTRIC PUMPS

The Jamesway 20” electric manure transfer pump is designed to agitate large manure reception pits and transfer up to 1500’ to long-term storage. Available in lengths from 8’ to 16’ these pumps can be equipped with a 50, 75, or 100 HP electric motor to provide maximum pumping efficiency and performance.

All pumps feature a heavy-duty 20” diameter impeller, a tubular type drive shaft that needs no intermediate support bearings, and an oil-bath lower bearing assumably with triple, greaseable seals to maintain reliable pump operation.

The COMMERCIAL DUTY vertical pump

Actual pump performance may vary depending on manure consistency.

6” discharge

50, 75 or 100 HPelectric motor

Oil reservoir withremote grease line to lower

chamber

Wall or fl oor mounting kits

8’ to 16’ models

Oil fi lled bearingassembly

20” heavy-dutybolted impeller

FLUSHING PUMPSJamesway builds a variety of pumps for barn flushing, tanker loading and other special purposes. Your Jamesway Dealer can help you select the right pump for your job.

Designed to quickly chop and mix bedding materials, the Jamesway Electric Prop Agitator uses the same proven frame as the 16” vertical pump.

PROP AGITATOR

Fiberglass belt shield

is hinged for easy access

Floor mount withswivel and

locking pedal

Rigid square body, models up to 16’

20” diameter impellerand hardened

stationary knives

Oversize gearbox

Thick steel safety shroud

Heavy duty 1.5” bearingon easy access mounts

Oil reservoirfor gearbox

Choose from 7.5, 10 or 15HPdrive kit and motor

The propeller edge scissors bedding against the hardened steel knives

to quickly homogenize manure.

Frequently used for cleaning the floors in dairy barn holding areas, this Flush Pump produces high flow volumes using a 40 HP motor.

All wear parts are bolt-on making it easy to keep yourJamesway pump working like new.

6” or 8” discharge

Oil reservoir with remote grease line in

lower chamber

Oil-fi lled bearing assembly

www.JameswayFarmEq.com

ACCESSORIESEvery installation is different, and our wide assortment of valves, fittings and adapters let you select the right components for each job. Jamesway accessories provide a clean and professional finish on every application. And remember that this is not just water...manure pumping requires valves and fittings specifically designed for the job!

The BEST PUMPS deserve the BEST accessories.

PLANNINGWELL-BUILT EQUIPMENT works best in a WELL-PLANNED SYSTEM.Your factory-trained Jamesway Dealer has the expertise to design your system. Jamesway Engineersand Territory Managers are always ready to help.

PVC ADAPTER SPACER HEAVY WELD TEE

THRU-WALLFLANGE

HEAVY WELDELBOW

TOP-TO-BOTTOMKIT FOR

RECEPTION PITS

RECEPTIONPIT VALVE

UNDERGROUNDVALVE

MANIFOLDSYSTEM

www.JameswayFarmEq.com

DEALER:

MANURE SYSTEMS:• Alley Scrapers• Vertical Electric Pumps• Electric Prop Agitator• Vertical PTO Pumps• Piston Transfer Pumps• Cross Gutter Systems• Barn Cleaners

MANURE APPLICATION:• Non-steer spreader tanks• Steerable spreader tanks• Injection Systems• Truck Mount Tankers• Lagoon Pumps• Prop Agitators• Loading pumps

FEEDING SYSTEMS:• Silo Unloaders• Feeders• Conveyors• Hammer Mill• Power Feed Carts• Bedding Chopper

Visit our website for more information on these Jamesway products!Jamesway Farm Equipment products are designed in conformance to ASAE Standards S354.4 “Safety for Farmstead Equipment” and S318.15 “Safety for Agricultural Equipment”. Some photos in this brochure have safety shields removed or open to show additional detail on equipment features. Never operate equipment without safety shields in place. Jamesway continually updates and improves products and reserves the right to make changes in the design, specifi cations, and to add improvements to our products, without incurring an obligation on equipment purchased.

JAMESWAY FARM EQUIPMENT, INC. 12 Route 249St. Francois-Xavier (Quebec) JOB 2V0Tele: (819) 845-7824 Fax: (819) 845-5153

JAMESWAY FARM EQUIPMENT, INC. USA Warehouse15383 State Hwy. 131 Tomah, WI 54660

MODEL 6 INCH 8 INCH 12 INCH 16 INCH 20 INCHCapacity (Agitation) 480 gpm 700 gpm 1100 gpm 1500 gpm 3000 gpmMotor kits 5 HP 7.5 or 10 HP 7.5, 10, 15 20, 25 HP

Twin 7.5 or twin 10Twin 10, 20, 25, 30

or 40 HP50, 75 or 100 HP

Impeller diameter 6” 8” 12” 16” 20”Discharge pipe 3” 4” square 4” 4” 6”Discharge coupler 3” steel or 4” PVC 4” steel or 4” PVC 6” Quick couplerAgitation nozzle diameter

2” 2” 3” Upper4” Lower

3” Upper4” Lower

3.5”

Lower drive bearing Oil fi lledBottom seal Greaseable with remote greaselineMount kits Floor or wall Tilt & Slide Kit or Floor mount Floor or wallPit depths 4’, 6’, 8’, 10’, 12’, 14’, 16’ or 18’ 6’, 8’, 10’, 12’, 14’ or 16’

MODEL 6 INCH 8 INCH 12 INCH 16 INCH 20 INCHWastewater

Hog Manure

Dairy Manure

Pump is not recommended for this application

Pump may be used with smaller particle size/low solids content

Pump may be used with smaller particle size

Recommended

SPECIFICATIONS

RECOMMENDED APPLICATIONS