1 © Nokia Siemens Networks 2011

For internal useUnique document identifier (ID) / Version number / Life cycle status

VF - Procedure for GbIP Migration on Procedure for BSC3i Hi-cap (ESB26)

1. Remove the MUX cables from SWU2 & SWU3.2. Make the configurations of all ESB cards to factory-default.

Command to be used

!reload to factory-defaults!

3. Use the attached ESB config template to re-configure the ESB cards (Note: All ESB cards of PCULAN must be configured)

4. Get a confirmation that the activity on Transmission & routers are completed as per the solution.5. Plug the MUX (main) cable on defined port of SWU2.6. Check the services7. Plug the another MUX (backup) cable on defined port of SWU3.8. Re-check the services.9. Once the services are up and initial checks are complete, enable the port 1/1/24 of both SWU4 & 5 to make SWU4-

SWU5 connectivity UP and working.!conf t

interface range 1/1/24no shutendwrite!

10. Observe the system stability for some time.Note: ESB config needs to be vetted by solutions/PL Team.

Dept. / Author / Date

Microsoft Office Excel Worksheet