Upload
others
View
4
Download
0
Embed Size (px)
Citation preview
VH Series Heavy Duty
Single stage constructionForged brass body & bonnet for maximum strengthStainless steel diaphragmsOxygen regulator with safety relief valve is set for safe operationSintered metal inlet filter to trap impuritiesNo soldered joints, for easy maintenance
Specifications:MAX INLET PRESSURE DELIVERY PRESSURE
0 - 280 - 28
1.43.5
7.0
MODEL NO. GAS
VH-7M-OX Oxygenbarbar
barbar
VH-1.4M.AC AcetyleneVH-3.5M.LP Propane
0 - 315 bar bar
Features:
96 SeriesFeatures:
Heavy Duty
MAX INLET PRESSURE DELIVERY PRESSUREMODEL NO. GAS
96-15M-N2 Nitrogenbarbar
barbar
96-15M-HE Helium 1596-10M-HY Hydrogen 10
0 - 3150 - 3150 - 315
bar bar15
Double stage construction provides more constant delivery pressureFirst stage reduces cylinder pressure by approximately 90%Second stage accurately controls flow and delivery pressureForged brass body for maximum strength Chrome bonnetNeoprene diaphragmsExternal safety relief valve is set for all gasesSintered metal inlet filter to trap impuritiesNo soldered joints, for easy maintenance
Specifications:
201 SeriesFeatures:
Specifications:Specifications:
Medium Duty
MODEL NO. GAS MAX INLET PRESSURE DELIVERY PRESSURE
201-7M-OX Oxygenbarbar
barbar
201-1.4M-AC Acetylene 1.4201-3.5M-LP Propane 0 - 28 3.5
0 - 315 bar bar7.00 - 28
PRESSURE CONTROL REGULATORSREGULATOR HARRIS STYLE SINGLE STAGE
REGULATOR HARRIS STYLE DOUBLE STAGE
Single stage constructionForged brass body for maximum strengthChrome bonnetNeoprene diaphragmsSintered metal inlet filter to trap impuritiesNo soldered joints, for easy maintenance
REGULATOR VICTOR STYLE SINGLE STAGE
Features:
Single Stage
Features:
Economy Style100-FL Series
Specifications:MODEL NO. GAS FLOW (LT./MIN) CYLINDER PRESSURE
100-25FL-AR Argon 0 - 25 bar315 bar
Machined brass bodyPiston design constructionAccurate gas flow regulatorCombination of regulator and flomweter in one unitOutlet pressure at 3.5 bar (Preset)MIG/TIG applications for light to medium dutyFlowmeter with easy-to-read tube and virtually unbreakable transparent polycarbonate outer cover for impact resistant and overpressure protection
101-FL SeriesFeatures:
Single Stage
Forged brass body for maximum strengthFull chromed appearanceNeoprene diaphragmsSintered metal inlet filter to trap impuritiesAccurate gas flow regulatorSafety relief valve is set for all gasesNo soldered joints, for easy maintenance
CRF-200 Series Electrically Heated
REGULATOR MEDICAL JAPAN STYLE
Specifications:MODEL NO.
bar
MODEL NO. GAS FLOW (LT./MIN) CYLINDER PRESSURE
101-25FL-AR Argon101-25FL-CD CO2
0 - 253150 - 25
bar315barbar
Specifications:MODEL NO.MODEL NO. GAS FLOW (LT./MIN) CYLINDER PRESSURE
FR-120 Oxygen 1 - 15 bar315 bar
Features:Forged brass body and chromed for maximum strengthAutomatic temperature controllerUtilizing high pressure liquefied Carbon Dioxide GasOutlet pressure at 3.5bar (Preset)
Specifications:MODEL NO.MODEL NO. CYLINDER PRESSUREHEATER POWER
CRF-200-220 220VAC / 210W bar315 bar
FLOW (LT./MIN)
0 - 25
FLOW CONTROL REGULATORS
FOR ARGON
Maximum inlet pressure 3000psi (ANSI)/ 210bar (CE)Sintered filter inlet for additional safety and longer lifePolycarbonate inner and outer tubes provide greater accuracy, durability & safetyOutlet flow control valve 900or 1800are available2” diameter Inlet pressure gauges 0~4.000 are availableThe standard preset outlet pressure is 50psi (ANSI) or 4 bar (CE) for stabilizingand accuracy flowing
Features:Cuts up to 80mm steelFully nickel-platedZinc coated handleTop stainliess steel level w/ hold down buttonTwo stainless steel needle valves for precise flame adjustment and better durabilityTip mixing for maximum operator safety
1601 SeriesFeatures:
Cuts up to 300 mm steelStainless steel tube provides greater heat Top stainless steel lever w/ hold down buttonTwo stainless steel needle valves for precise flame adjustment and better durabilityForged brass head for added strength and durabilityBrass or Aluminum handleTip mixing for maximum operator safety
Heavy Duty
Specifications:MODEL NO. HEAD LENGTH TIP SERIES
1601A 90° 500mmINLET THREAD
G3/8 x 19 ANME & PNME
Specifications:
MODEL NO. RECOMMENDEDCUTTING ATTACHMENT
HOSE CONNECTION THREAD DUTY
VH-211 VH-212 9/16” - 18N HEAVY
Features:Cuts up to 80mm steelTriangular stainless steel gas tubes for maximum strengthTwo stainless steel needle valves for precise flame adjustment and better durabilityTough extruded brass torch handle for long lifeTip mixing for maximum operator safetyStable flame preheating during cutting
MODEL NO. HEAD LENGTH TIP SERIES
42-9 90° 420mm M16 x 1.5 ST8-A & ST8-P
INLET THREAD
Specifications:
Specifications:
42-8 Series Light Duty
CUTTING TORCHES
42-9 Series Light Duty
HEAD LENGTH TIP SERIES
90° 420mm ST8-A & ST8-P
INLET THREAD
9/16 x 18 UNF
MODEL NO.
42-8
VH-211 Series Model VictorTorch Handle │ Heavy Duty
Features:Cuts up to 200 mm, Welds up to 12.7 mm Tough extruded brass handle for strengthTwo stainless steel needle valves for precise flame adjustment and better durabilityNo screws or soldered joints for easier maintenanceFit cutting attachment model #VH-212 or VH-2460Hose connection thread: 9/16”-18N
Specifications:
MODEL NO. RECOMMENDEDCUTTING ATTACHMENT
CUTTINGRANGE TIP SERIES DUTY
VH-212 VH-211 8”/200 mm 1-GPN / 1-101 HEAVY
Features:Cuts up to 1mm ~ 30 mm (1/32”~1-1/4”)Three stainless steel needle valves for precise flame adjustment and better durabilityForged brass head and body Adjust high pressure oxygen by needle valve
“M” Type
Specifications:MODEL NO. GAS TIP SERIESCMS-7505-A Oxy-Acetylene
INLET THREAD7505-A
CMS-7505-P Oxy-Propane M16 x 1.5 7505-PM16 x 1.5
CMS-7505 Series
DMS-7507 SeriesFeatures:
Cuts up to 1mm ~ 30 mm (1/32”~1-1/4”)Welds up to 0.5mm ~ 8mm (1/64”~5/16”)Torch connection thread sizes: M16×1.5Forged brass head and body Adjust high pressure oxygen by needle valve
Welding and Cutting Kit
Specifications:
MODEL NO. GASCUTTING TIP
SERIESWELDING TIP
SERIESDMS-7507-A Oxy-Acetylene
WELDING CONNECTION PIPE NO.
7503-ADMS-7507-P Oxy-Propane 750700 7503-P
7505-A7505-P
750700
Specifications:MODEL NO. GAS TIP SERIESCAS-7506-A Oxy-Acetylene
INLET THREAD7506-A
CAS-7506-P Oxy-Propane M16 x 1.5 7506-PM16 x 1.5
CAS-7506 SeriesFeatures:
Cuts up to 1mm ~ 100 mm (1/32”~4”)Three stainless steel needle valves for precise flame adjustment and better durabilityForged brass head and body Adjust high pressure oxygen by needle valve
“A” Type
CUTTING TORCHESVH-212 Series Cutting AttachmentOxy-Acetylene, Propane
Features:Heavy Duty cutting up to 8” (200mm) Forged brass head and bodyStainless steel needle valves for precise flame adjustment and better durabilityStainless steel tube construction for maximum strength Double O-ring seal for quick hand tight connection and leak freeStainless steel high pressure lever
WMS-7503 SeriesFeatures:
“M” Type
Welding capacity: 0.5mm~8mm (1/64”~5/16”)Torch connection thread sizes: M16×1.5Include 75030 series welding tips (7PCS)
WSS-195 Oxy-Propane
WSS-194 SeriesFeatures:
Welding capacity: 0.5mm~3mm (1/64”~1/8”)Torch connection thread sizes: 9/16”×18N
Specifications:
MODEL NO. GASTIP
SIZEOXY. PRESSURE
(KG/CM2)WELDING RANGE
(MM)GAS PRESSURE
(KG/CM2)
WSS-194 Oxy-Acetylene
0.5 ~ 1.0 1.520 0.2 ~ 0.51.0 ~ 1.5 1.550 0.2 ~ 0.51.5 ~ 2.0 2.075 0.2 ~ 0.52.0 ~ 2.5 2.5100 0.2 ~ 0.52.5 ~ 3.0 2.5150 0.2 ~ 0.50.5 ~ 1.0 1.5LPW-1 0.31.0 ~ 1.5 1.5LPW-2 0.31.5 ~ 2.0 2.0LPW-3 0.32.0 ~ 2.5 2.5LPW-4 0.32.5 ~ 3.0 2.5LPW-5 0.4
MODEL NO.TORCH HANDLE
WRENCH 810215
810201
WGS-8102 SeriesFeatures:
“G” Type
Welding capacity: 0.5mm~6mm (1/64”~1/4”)Torch connection thread sizes: G 1/4-R.H., G 3/8-L.H.Include 81020 series welding tips (4PCS)
Features:WSS-7501 Series “S” Type
Welding capacity: 0.5mm~3mm (1/64”~1/8”)Torch connection thread sizes: G 1/4-R.H., G 3/8-L.H.Include 75010 series welding tips (4PCS)
WELDING TORCHES
HE-506 Series
HEATING TORCHES
HE-505 Series Oxy-Propane
Specifications:MODEL NO. TYPE LENGTHORIFICETIPS NO.
HE-505-1HE-505-2HE-505-3HE-505-4HE-505
W / 1TIP 2290-2H 650mm2290-3H 750mm2290-4H 1,050mm2290-5H 1,250mm2290-2,3,4,5H
W / 1 TIPW / 1 TIPW / 1 TIPW / 3 TIPS 1,050mm
1.1 x 251.3 x 251.1 x 331.1 x 33
Specifications:
MODEL NO. TYPE LENGTHLPG PRESSURE
(KG/CM2)HEAD SIZE
HE-506-1HE-506-2HE-506-3HE-506
W / 1TIP 25.4 mm 500mm38.1 mm 500mm50.8 mm 500mm
500mm
W / 1 TIPW / 1 TIPW / 3 TIPS
0.30.40.5
HT-507 Series
Features:Brass tube with stainless heating tipsSuitable for applications that require large volume of heat. With the pressure lever, operator can go from pilot flame to full-brush flame immediately.Length: 560mmHead size: 60mm
Application:Soldering, brazing, annealing, straightening and bending plates, pipes and bars, preheating in welding jobs, drying molds, thawing jobs, asphalt work, etc.
-
Dust filter
With the following functions, flashback arrestors can stop backfire and prevent accidents.Using MORRIS flashback arresotrs could effectively enhance workplace safety and provide much more secure surroundings for users.
Protect flashback arrestors free from dirt and grease.
Flame arrestor
Repeatedly arrest flames by a sintered stainless steel element.
ThreadIn accordance with EN 560 and ISO 3253, UNF 9/16”-18, G3/8”, UNF 5/8”, and so on, are available
Non-return valve
Prevent gas returning back to the upstream of the flashback arrestor.
HA288 H288H188SERIES HA188
OXYGEN HA188-RGBFUEL GAS HA188-LGBFOR TorchINLET THREAD G 3/8”OUTLET THREAD G 3/8”
HA288-RGBHA288-LGBRegulatorG 3/8”G 3/8”
Specifications:
H188-RGBH188-LGB
TorchG 3/8”G 3/8”
H288-RGBH288-LGBRegulatorG 3/8”G 3/8”
FLASHBACK ARRESTORS
GAS PRESSURE (BAR)
Oxygen 1.0 - 7.0
STANDARD CONNECTION
M16 x 1.5
Oxygen 1.0 - 7.0 M16 x 1.5
MODEL NO.
GS-150-A
GS-150-P
Acetylene 0.2 - 1.0 M16 x 1.5
Propane 0.2 - 2.0 M16 x 1.5
Specifications:
GS-150 Series Gas-saver
ACCESSORIES
Features:Simple structure, big energy, small costEasy handling with electricityFixed seat for easy installationThe pilot flame hole is only 0.1mm to save more considerable amount of gasesFree from repeated procedures of igniting, flame adjusting and extinguishing work
-
TIPS
OXY. PRESSURE(BAR)
CUTTING RANGE(MM)
ACE. PRESSURE(BAR)
1 - 5
1 - 5
2.5 0.35 - 15
5 - 15
3.0 0.315 - 30
15 - 30
3.5 0.3
TIP SIZE
M1M2M3
PART NO.
7505-1A7505-2A7505-3A
Cutting Tip7505-A SeriesSpecifications:For CMS-7505-A cutting torch and DMS-7507-A kit
OXY. PRESSURE(BAR)
CUTTING RANGE(MM)
PRO. PRESSURE(BAR)
2.5 0.33.0 0.33.5 0.3
TIP SIZE
M1M2M3
PART NO.
7505-1P7505-2P7505-3P
Cutting Tip7505-P SeriesSpecifications:For CMS-7505-P cutting torch and DMS-7507-P kit
1 - 1515 - 50
50 - 100
OXY. PRESSURE(BAR)
CUTTING RANGE(MM)
ACE. PRESSURE(BAR)
3.0 0.33.5 0.54.0 0.8
TIP SIZE
A1A2A3
PART NO.
7506-1A7506-2A7506-3A
Cutting Tip7506-A SeriesSpecifications:For CAS-7506-A cutting torch
1 - 1515 - 50
50 - 100
OXY. PRESSURE(BAR)
CUTTING RANGE(MM)
PRO. PRESSURE(BAR)
3.0 0.33.5 0.54.0 0.8
TIP SIZE
A1A2A3
PART NO.
7506-1P7506-2P7506-3P
Cutting Tip7506-P SeriesSpecifications:For CAS-7506-P cutting torch
1.51.52.02.5
OXY. PRESSURE(BAR)
CUTTINGTHICKNESS
ACE. PRESSURE(BAR)
LENGTH(MM)
0.5 750.5 75
751.01.0
75
1 - 5
10 - 3030 - 50
5 - 10
PART NO.
ST8-1AST8-2A
Cutting TipST8-A SeriesSpecifications:For 42-8 and 42-9 cutting torch
ST8-3AST8-4A
TIPS
1.51.52.02.5
OXY. PRESSURE(BAR)
CUTTINGTHICKNESS
PRO. PRESSURE(BAR)
LENGTH(MM)
0.5 750.5 75
751.01.0
75
1 - 5
10 - 3030 - 50
5 - 10
PART NO.
ST8-1PST8-2P
Cutting TipST8-P SeriesSpecifications:For 42-8 and 42-9 cutting torch
ST8-3PST8-4P
1.5
OXY. PRESSURE(BAR)
CUTTINGTHICKNESS
ACE. PRESSURE(BAR)
LENGTH(MM)
0.5 881 - 5
PART NO.
ANME-1 (1/32”)
Cutting TipANME SeriesSpecifications:For 1601 cutting torch
2.02.53.0
0.5 88
881.01.0
8810 - 3030 - 60
5 - 10ANME-2 (3/64”)ANME-3 (1/16”)ANME-4 (5/64”)
3.54.0
1.5 881.5 88100 - 200
60 - 100ANME-5 (3/32”)ANME-6 (1/8”)
1.5
OXY. PRESSURE(BAR)
CUTTINGTHICKNESS
ACE. PRESSURE(BAR)
LENGTH(MM)
0.5 921 - 5
PART NO.
PNME-1 (1/32”)
Cutting TipPNME SeriesSpecifications:For 1601 cutting torch
2.02.53.0
0.5 92
921.01.0
9210 - 3030 - 60
5 - 10PNME-2 (3/64”)PNME-3 (1/16”)PNME-4 (5/64”)
3.54.0
1.5 921.5 92100 - 200
60 - 100PNME-5 (3/32”)PNME-6 (1/8”)
Welding Tip75010 SeriesSpecifications:For WSS-7501 welding torch
PART NO. TIP SIZEORIFICEψ (MM)
OXY. PRESSURE(BAR)
WELDING RANGE(MM)
ACE. PRESSURE(BAR)
0.1 ~ 0.2 1.00.4 0.2 ~ 0.50.2 ~ 0.5 1.50.5 0.2 ~ 0.50.5 ~ 1.0 1.50.6 0.2 ~ 0.51.0 ~ 1.5 1.50.7 0.2 ~ 0.5
10750101167501022575010340750104
PART NO. TIP SIZEORIFICEψ (MM)
OXY. PRESSURE(BAR)
WELDING RANGE(MM)
ACE. PRESSURE(BAR)
0.5 ~ 1.0 1.51.0 0.2 ~ 0.51.0 ~ 1.5 1.51.1 0.2 ~ 0.51.5 ~ 2.0 2.01.2 0.2 ~ 0.52.0 ~ 2.5 2.51.4 0.2 ~ 0.5
5075030175750302
100750303150750304
2.5 ~ 3.0 2.51.6 0.2 ~ 0.53.0 ~ 5.0 3.01.8 0.2 ~ 0.55.0 ~ 8.0 3.02.1 0.2 ~ 0.5
225750305350750306500750307
75030 Series Welding Tip
Specifications:For WMS-7503 welding torch
Welding Tip81020 SeriesSpecifications:For WGS-8102 welding torch
PART NO. TIP SIZEORIFICEψ (MM)
OXY. PRESSURE(BAR)
WELDING RANGE(MM)
ACE. PRESSURE(BAR)
0.5 ~ 1.0 1.50.7 0.2 ~ 0.51.0 ~ 2.0 2.51.0 0.2 ~ 0.52.0 ~ 4.0 3.01.3 0.2 ~ 0.54.0 ~ 6.0 3.01.5 0.2 ~ 0.5
A1810203-1A2810204-2A3810205-3A4810206-4
WELDING, CUTTING & HEATING COMPLETE OUTFIT HUNTER OUTFIT MEDIUM DUTY (Hunter Style)MODEL TORCH HANDLE CUTTING ATTACHMENT CUTTING TIPS SIZEWELDING TIPS SIZE
810103-1810104-2810105-3810106-4
810107-5 810112-H810113-S1810114-S2810115-S3
810108-6810109-7810110-8
810111810101HUCW-80
ACCESSORIES
Wrench, Tip Cleaners, Welding Connection nut, Guiding Carriage & Cirde Guide.
GAS CUTTING, WELDING & HEATING TOOLBOX OUTFITS HEAVY DUTY (Victor Style-Heavy Duty)
TWIN HOSE: 15FTS 1/4” w/FITTINGS, SPARKLIGHTER, GOGGLES AND TIP CLEANERS.
450-7M 450-1.4MVH-W
(2)OPTIONAL
1-101(1)
88-3FGR88-3FGL
VH-211 VH-212VHCW-32TB
MODEL TORCHHANDLE
CUTTINGATTACHMENT
CHECKVALVE
OXYGEN REGULTAOR
ACETYLENEREGULATOR
TIPS (SIZE)
WELDING HEATING CUTTING
ACCESSORIES
GAS CUTTING, WELDING & HEATING TOOLBOX OUTFITS HEAVY DUTY (Victor Style-Medium Duty)
TWIN HOSE: 12.5FTS 1/4” w/FITTINGS, SPARKLIGHTER, GOGGLES AND TIP CLEANERS.
VM-7M VM-1.4MVM-W
(0)3-101
(0)88-3FGR88-3FGL
VM-221 VM-222VMCW-20TB
MODEL TORCHHANDLE
CUTTINGATTACHMENT
CHECKVALVE
OXYGEN REGULTAOR
ACETYLENEREGULATOR
TIPS (SIZE)
WELDING CUTTING
ACCESSORIES
GAS CUTTING, WELDING & HEATING TOOLBOX OUTFITS HEAVY DUTY (Harris Style-Medium Duty)
TWIN HOSE: 15FTS 1/4” w/FITTINGS, SPARKLIGHTER, GOGGLES AND TIP CLEANERS.
25-7M 25-1.4MHCW-W(3, 5, 7)
OPTIONAL6290(1)
E2-43HC63-2 HC73-2HCW-23TB
MODEL TORCHHANDLE
CUTTINGATTACHMENT MTXER OXYGEN
REGULTAORACETYLENEREGULATOR
TIPS (SIZE)
WELDING HEATING CUTTING
ACCESSORIES
CHECKVALVE
88-3FGR88-3FGL
Authorised Distributor:
Ver. Eng 2017.08