mcehassan.ac.inmcehassan.ac.in/files/FACULTY-RESEARCH-PUBLICATIONS.docx · Web view2nd International conference “Current Trends in Engineering & Technology sponsored by IEEE Organized

MALNAD COLLEGE OF ENGINEERING, HASSAN, KARNATAKATECHNICAL EDUCATION QUALITY IMPROVEMENT PROGRAMME-II

Details of research publications in International refereed Journals (after joining the project till to date)Sl. No. Name of the Faculty Department Title of the Paper Journal details

2012-13 (38)

1Dr Vishwanath Hegde

Professor

Electrical and Electronics Engineering

On the influence of neighbouring conducting objects on the induced current in simple docon conductors due to nearby lightning strike

Electric power components and systems (Tayler & Francis) Vol.40 Issue 14, Oct. 2012 PP 1533 – 1543

2 Dr .G.K .Purushothama

Professor


“Study in sliding mode control for 2nd order system”

International Journal of Research and Innovation in Computer Engineering

3“Case study of Hystyresis and PI control as applied to engine coolant temperature control” ICCEETS – 2012

4

Dr. Y. M.ShashidharAssociate Professor Automobile Engineering

Tribological studies on AISI 1040 with raw and modified versions of Pongam and Jatropha vegetable oils as lubricants

Advances in Tribology , Vol.2012, Article ID 560175 (2012)

5 Deep drawing of 304 L Steel Sheet using Vegetable oils as Forming Lubricants

International Journal of Advancemetns in Research & Technology. Vol.1:7,2012, ISSN 2278-7763 (2012)

6Dr Vishwanath Hegde

Professor


On the influence of neighbouring conducting objects on the induced current in simple docon conductors due to nearby lightning strike

Electric power components and systems (Tayler & Francis) Vol.40 Issue 14, Oct. 2012 PP 1533 – 1543

7 Dr .G.K .Purushothama

Professor


“Study in sliding mode control for 2nd order system” International Journal of Research and Innovation in

Computer Engineering

8“Case study of Hystyresis and PI control as applied to engine coolant temperature control” ICCEETS – 2012

9 Dr. Y. M.ShashidharAssociate Professor Automobile Engineering


Advances in Tribology , Vol.2012, Article ID 560175 (2012)

10 Dr .Y .Arun KumarProfessor

Electronics and Instrumentation Engineering

Discrete event simulation for increasing productivity in digital manufacturing

IJERTISSN: 2278-067X, Volume 1, issue 10 (June 2012), PP 36-40

11 Dr. Chandrika JAssociate Professor

Computer Science & Engineering

Frequent item set mining in transactional streams based on quality control and resource adaptation

International journal of Data mining and knowledge management process, Vol. 2, No. 6, November 2012

Sl. No. Name of the Faculty Department Title of the Paper Journal details

12Dr. H.S. Mohana

Professor and Dean (AA)

Instrumentation Technology

“Computer Aided Diagnosis for the Detection of Lung Nodules”

IOSR Journal of Engineering (IOSRJEN),ISSN: 2250-3021 Volume 2, Issue 7 (July 2012), PP 134-136.

13Dr. H.S. Mohana



“Machine Vision Based Non-Magnetic Object Detection and Removal on Moving Conveyors in Steel Industry through Differential Techniques”

International Journal of Computer Vision and Image Processing, 2(3), 66-77, July-September 2012.

14Mr. G. Shivakumar

Associate Professor


"Emotion Recognition Using Finger Tip Temperature: First Step towards an Automatic System"

International Journal of Computer and Electrical Engineering vol. 4, no. 3, pp. 252-255, 2012.ISSN: 1793-8163.

15 Shashidhara, Y.M., Jayaram, S.R. Professor

Mechanical

Engineering


Advances in Tribology, Vol.2012, article ID 560175, 2012

16 C.V. Venkatesh,Mechanical

EngineeringLow Cycle Fatigue Behaviour of Al-Mg-Si Alloy AA6061 Processed by Equal Channel Angular Pressing

Advanced Materials Research (Volumes 463 - 464) 201217 S. Ganesh Sundara Raman,

18 Chakkingal Uday

19 Shashidhara, Y.M., Jayaram, S.R.Professor

Mechanical Engineering

Deep drawing of 304L Sheets using Vegetable oils as Forming Lubricants

Advancements in Research and Technology Vol. 1:7, 2012, ISSN 2278-7763.

20 H.V.RamakrishnaProfessor


Business Process Reengineering for Indian Rural Health Care Sector using Data Envelopment Analysis Technique,

Scientific and Research Publications, Vol.2, No.5 ISSN 2250-3153, May 2012 PP. 1-6

21 Dr. Srinath M.SAssociate Professor


Simulation of Microwave Heating while Joining of bulk copper

Journal of Engineering Science & Technology 4[2], 152-158, 2012

22Mr. Sree Rajendra

Associate ProfessorMechanical Engineering Pressure sensor based event data Recorded, MER,ISSN-2249-6645, Volume-2 issue-4, July-Aug-

2012-IJMER, PP-1972-1976

23

Mr. Prathap M.S

Mr. Laxman Naik

Dr. B. Yogesha

Mechanical Engineering Automated Drug Dispensing System Journals Vol-2, Issue, 3 July-2012, IJSCE


24Dr. S. Pradeep,

Sumit Kumar Sharma,

Vivek Pancholi,

Associate Professor


Microstructural and mechanical characterization of friction stir processed 5086 aluminum alloy, Mater. Sci. Forum,

Vol. 710, pp 253-257, 2012.

25 Mechanical Engineering

Influence of friction stir processing parameters on anisotropic behavior of 5086-O aluminum alloy, Mater. Sci. Forum,

Vol. 702-703, pp 348-351, 2012.

26Dr. Pradeep

Associate ProfessorMechanical Engineering

Multipass friction stir processing and its effect on mechanical properties of aluminum alloy 5086, Metall. and Mater. Trans A,

Vol. 43, pp. 4311- 4319, 2012.

27Mr. G. Shivakumar

Associate Professor


“Computer Aided Diagnosis for the Detection of Lung Nodules”

IOSR Journal of Engineering (IOSRJEN),ISSN: 2250-3021 Volume 2, Issue 7 (July 2012), PP 134-136.

28Dr. Amarendra H. J


“Synergy of cavitation and slurry erosion in the slurry pot tester”, Wear, 290-291 (2012) 25-31.

29Amarendra. H. J, P. Kalhan, G.P. Chaudhari, S.K. Nath, S.Kumar,


“Slurry erosion response of heat treated 13Cr-4Ni martensitic stainless steel”

Materials Science Forum Vol. 710 (2012) pp 500-505.

30Dr. Amarendra H. J, Associate Professor

Mechanical

Engineering“Effect of deposition parameters & Molybdenum percentage on Nickel-Molybdenum alloy coatings”,

Advanced Materials Research, Vol. 585. pp 493-497, 2012.

31 Dr .A.J. Krisihnaiah

Associate Professor

Civil Engineering

“Role of Moulding Water Content on the Strength Properties of Red Earth treated with Mine tailings”,

International Journal of Science & Engineering Research (IJSER), Vol. 4(5), 47-50

312 “Effect of Lime on the Index Properties of Black cotton soil and Mine tailings mixtures”,

IOSR Journal of Mechanical and Civil Engineering (IOSRJMCE), Vol.3(4), 01-07

33Dr. A .J. Krisihnaiah

Associate Professor

“Effect of Lime on the Hydraulic Conductivity of Red Earth Treated with Mine tailings for the Construction of Earth Dams”

Research and Reviews: Journal of Engineering and Technology (RRJET), Vol.2(3), 265-269

34Strength Behaviour of Red Earth and Mine tailings Mixture Treated with Lime in presence of Sodium chloride”

International Journal of Earth Science and Engineering (IJEE), Vol.6 (5), 1060 -1067


35Mr. B E Yogendra

Associate ProfessorCivil Engineering

Effect of DEM source and resolution on stream flow prediction and downscaling by SWAT model in an Indian river basin:

Hydrological process vol.3(4), 243-261

36Mr. Sree Rajendra


Application of Distributed control system in Automation of process indication,

Emerging Technology & Advanced Engineering Volume – 2, Issue - 6, July -2012 (ISSN-2250-245)

37 Prof. N.S. JyothiAssociate Professor


A model for the Temperature Distribution in Resin Impregnated Paper Bushings

Proceedings of IEEE-PES Asia-Pacific Power and Energy Engineering Conference, March 27-29, 2012, Shanghai, China.

38 Prof. N.S. JyothiAssociate Professor


Statistical Methods for Accelerated Life Testing with Particular Reference to Resin Impregnated Paper Bushings

Proceedings of IEEE-PES Asia-Pacific Power and Energy Engineering Conference, March 27-29, 2012, Shanghai, China.

2013-14 (37)Sl. No. Name of the Faculty Department Title of the Paper Journal details

1 Dr. Y. M.ShashidharAssociate Professor Automobile Engineering

Experimental determination of cutting power for turning and material removal rate for drilling of AA 6061-T6 using vegetable oils as cutting fluid

Advances in Tribology, Vol 2013, Article ID 362931 (2013)

2Dr. H.S. Mohana



“Object Classification from Estimated Traffic Flux Density Using Discrete Fourier Transform”

International Journal of Computer Science and Artificial Intelligence, Mar. 2013, Vol-3, Issue.1.

3Dr. C. V. Venkatesh

ProfessorMechanical Engineering

Characterization of AA6061 Alloy Processed by Equal Channel Angular Pressing and Subjected to Low Cycle Fatigue

Trans Indian Inst Met DOI 10.1007/s12666-012-0236-4, 2013

4Dr. H.V.RamakrishnaProfessor Mechanical

EngineeringDyad Synthesis of planar Seven-link variable topology mechanism for motion between two dead-centre positions,

IOSR Journal of Mechanical & Civil Engineering (IOSR-JMCE) vol.3, issue 3, pp – 21-29, 2013

5Dr. Srinath M.S


FSP synthesis of seven-link variable topology mechanism for function & motion generation,

International Journal of Technology & Research Advances vol.1, pp 32-38, 2013

6Shashidhara, Y.M., Jayaram, S.R.Professor



Advances in Tribology Vol.2013, article ID 362931. (2013)


7Dr. H.V.RamakrishnaProfessorDr. Srinath M.SAssociate Professor


Dyad Synthesis of planar Seven-link variable topology mechanism for motion between two dead-centre positions,

IOSR Journal of Mechanical & Civil Engineering (IOSR-JMCE) vol.3, issue 3, pp – 21-29, 2013

8Shashidhara, Y.M., Jayaram, S.R.Professor



Advances in Tribology Vol.2013, article ID 362931. (2013)

9 Mr. Dushyanth Kumar K.R., G.S.Shiva Shankar.,


Complete Evolution and Success Factors of Lean Manufacturing

TM fiat of Theoretical Research and Letters (IJTRL), Vol 3(2), pp.39-43, 2013

10Mr. G. Shivakumar

Associate Professor


"Galvanic Skin Response: A Physiological Sensor System for Affective Computing"

International Journal of Machine Learning and Computing vol. 3, no. 1, pp. 31-34, 2013. ISSN: 2010-3700.

11

Dr. S. Pradeep,

Sumit Kumar Sharma,

Vivek Pancholi,

Associate Professor


Effect of micro structural inhomogenity on super plastic behavior of multipass friction stir processed aluminum alloy, Mater. Sci. Engg.

A., Vol. 561, pp. 78-87, 2013.

12 Mr. Dushyanth Kumar K.R., G.S.Shiva Shankar.,


Effective product Efficiency using advanced manufacturing Technology

Volume-7, Issue -2 , PP121-134, (2013) Business and system research IJBSR

13 Dr. H.V.RamakrishnaDr. Srinath M.S


FSP synthesis of seven-link variable topology mechanism for function & motion generation,

International Journal of Technology & Research Advances vol.1, pp 32-38, 2013

14Amarendra. H. J, P. Kalhan, G.P. Chaudhari, S.K. Nath, S.Kumar,


“Slurry erosion response of heat treated 13Cr-4Ni martens tic stainless steel”

Materials Science Forum Vol. 710 (2012) pp 500-505.

15Dr. Amarendra H. J, Associate Professor


“Cavitations and slurry erosion of aluminum in the slurry pot tester”, Materials Science Forum Vol. 736, pp 218-222, 2013.

16Dr. S.R .Jayaram

Professor


“Experimental determination of cutting power for turning and material removal rate for drilling of AA 6061-T6 using vegetable oils as cutting fluid”

Vol.2013, Article ID 362931.


17Prof. V.V. Bongale,

Associate Professor


“Super plastic Behaviour of Aluminium Alloy-AA5083” Pp 2740 to pp2748, Vol-2, Issue-7, July-2013.

“Design and Fabrication of Mobile Phone Controlled Four Legged Walking Robot” (IJCER) ver. 6, pp 47- 51, Vol. 3, Issue.7, July 2013.

“Design and Fabrication of Prototype of Automated Smart Car Parking System using PLC (IJSET) Issue 9, Volume 2 Sept. 2013.

18Dr. C. V. Venkatesh

Associate Professor

Mechanical

Engineering

“Characterization of AA6061 Alloy Processed by Equal Channel Angular Pressing and Subjected to Low Cycle Fatigue”,

Trans IIM, Trans IIM, 2013, 66(2), 147-154.

19 Prof. Lakshman Naik

Associate Professor


Automation of Alternate Test Bench to Ensure Accurate Testing Using PLC & HMJ Vol.2, Issue-7, July 2013 ( ISSN 2278-0181)

20Dr. H.V.Ramakrishna,

Professor


“Dyad Synthesis of planar Seven-link variable topology mechanism for motion between two dead-centre positions”,

vol.3, issue 3, pp – 21-29, 2013

21Dr. Srinath M.S

Associate Professor


“Dyad Synthesis of planar Seven-link variable topology mechanism for motion between two dead-centre positions”, IOSR Journal of Mechanical & Civil Engineering (IOSR-JMCE)

vol.3, issue 3, pp – 21-29, 2013

22Dr. S. Pradeep

Associate Professor


“Effect of microstructural inhomogenity on superplastic behaviour of multipass friction stir processed aluminum alloy”,

Vol. 561, pp. 78-87, 2013

23 Dr. Amarendra H. J,Associate Professor

Mechanical Engineering “Cavitation and slurry erosion of aluminum in the

slurry pot tester”,Vol. 736, pp 218-222, 2013.

24Mr. Dushyanth Kumar K.R

Assistant Professor


“Complete Evolution and Success Factors of Lean Manufacturing”

Vol 3(2), pp.39-43, 2013.

25“Effective product Efficiency using advanced manufacturing Technology

Volume-7, Issue -2 , PP121-134, (2013)


26 Prof. M.G VasundharaAssistant Professor


System” International Journal of Engineering Research & Technology,

vol 2 Issue 8 Aug 2013

27Prof. Lakshman Naik

Associate Professor

Mechanical Engineering PLC Based Automatic Racking System Vol.2, Issues, August 2013, (ISSN 2278-0181)

28 Dr. H. N. SureshProfessor


Studies on Quasi-Z-source based Three-phase isolated DC/DC converter for Distributed Power Generation

International Journal of Emerging Technology and Advanced Engineering vol. 3, issue 7, July 2013, pp.473-477

291. H. N. Suresh,2. Mohanalakshmi J.3. Shruthi K.4. Shruthi T.S.


Fabrication and Development of Signal Loss Recovery System for AC Drives

International Journal of Emerging Technology and Advanced Engineering, vol. 3, issue 8, August 2013, pp.164-171.

30 Dr. Vishwanath HegdeProfessor and HOD


An Experimental Investigation on Broken Rotor Bar in Three Phase Induction Motor by Vibration Signature Analysis using MEMS Accelerometer

International Journal of Emerging Technology and Advanced Engineering, vol. 3, Issue 4, pp. 357 - 363 April 2013.

31

1. Varaprasad N. L.2. S. Rajannaa3. Mohanalakshmi J.4. Shruthi K5. T. S. Shruthi


Microcontroller Based DC Motor Control With Fuzzy Maximum Power Point Tracking of PV System

International Journal of Current Engineering and Technology ISSN 2277 – 4106, 2013, Available online 01 October 2013, Vol.3, No.4.

32 Dr. H S MohanaProfessor and Dean


“Development and Simulation of Poly View Fusion for Enhance Video Denoising Algorithms” Vol 1, Issue 5, May 2013, Page.165-174

33Dr. G ShivakumarAssociate Professor


"Galvanic Skin Response: A Physiological Sensor System for Affective Computing," Vol. 3, No. 1, pp. 31-34, 2013.

34“An Improved Artificial Neural Network Based Emotion Classification System for Expressive Facial Images”,

ISBN 978-81-322-1523-3, No. 258, Chapter 31, 2013.

35 Mr. H S MuraliAssistant Professor

Electronics and Instrumentation

“A Kalman filter based state parameter estimator for a micro air Vehicle”

ISBN 978-81-322-1523-3, No. 258, Chapter 31, 2013.

36 Dr. M .K. ParthaProfessor

Mathematics Non-linear Convection International Journal of Advances in Engineering & Technology, Sept- 2013, Page (1-7)

37 Dr. Vishwanath HegdeProfessor and HOD


Comparative Study on Induced Currents in Steel Reinforced Building due to a Nearby Lightning Strike to Ground and a Nearby Elevated Object

Accepted for publication in American Journal of Electrical and Electronic Engineering, Dec 2013.

2014-15 (72)Sl. No. Name of the Faculty Department Title of the Paper Journal details

1Prof. Vijaya kumar G Tile

Assistant Professor


Energy Analysis and IGCC Plant Technology to improve the efficiency and to reduce the Emission in Thermal Power Plant

IJRET, NCRIET-2014 Volume No.03, Special Issue No.03, May 2014, page No.502-509

2Dr. H. N. SureshProfessor Electrical and

Electronics Engineering

Studies on Quasi-Z-Source-Based Isolated DC/DC Converter for Distributed Power Generation

Emerging Research in Electronics, Computer Science and Technology, Volume 248, 2014, pp 121-130

3

1 H. N. Suresh2 M. E. Tejamurthy3 Geetha M. A4 Raghavendraprasad

Deshpandey


Studies on Ultra capacitor Based Energy Storage and Power Conversion System for Three-phase Electric Drives

International Journal of Current Engineering and Technology, April 2014, Vol. 4, No. 2.

4

1. Raghvendraprasad Deshpande

2. G. K. Purushothama3. M. S. Raviprakasha


A Novel Approach In Modeling and Analysis of Two-Phase Symmetrical Induction Machine for Smart Grid Applications

International Journal of Multidisciplinary Research and Advances in Engineering, Vol. 6, No. II, April 2014, pp. 57-71.

5 1. Kumaraswamy L.2. G. K. Purushothama


Comparative Analysis of PID and Fuzzy PI controller for Speed Control of DC Motor

International Journal of Multidisciplinary Research and Advances in Engineering, Vol. 6, No. II, April 2014, pp. 487- 500.



“Engineering and Technology Education for Sustainable Development”

4-5 March 2014 at Bangalore.



Era Identification and Recognition of Stone In-scripted Kannada Characters Using Artificial Neural Networks

8 Ms. Uma. B

Associate Professor

Information Science and Engineering

A New Level Based Parallel Task Graph Scheduling Method

ISTE-ACEEE International Journal in Computer Science, Vol.1, No.1, March 2014

A comparative study and WIMAX and LTE as the mobile enterprise network ISBN 978-163173186-0Vol 2: page no:53-57

9Dr. V. N. Narayana

Professor

Computer Science & Engg.

Collaborative Adaptive Down-Sampling and Up conversion - An Approach for Image Compression

2014 – International Journal

ISSN – 2320-0790

CADAU – An Approach for Image Compression ISBN- 978-1-4673-5759-3, Page No: 530-534

http://link.springer.com/book/10.1007/978-81-322-1157-0

http://link.springer.com/book/10.1007/978-81-322-1157-0


10 Dr. A .J .KrishnaiahAssociate Professor

Civil Engineering

Analysis of Strength Behaviour of Lime treated Red earth and Mine tailing mixtures using X-ray diffraction and SEM Techniques

International Journal of Scientific and Research Publications, Vol.3

11 Mr. H. S. NarasimhanAssociate Professor

Hardened Properties of Concretes made with Micro Silica and Alccofine-A Performance Optimization based Comparative Study

Proceedings of International Journal of Computer Science and Information Technology Research Excellence

Experimental Studies on Self Compacting Concrete by Partial Replacement of Sand by quarry dust, Cement by Rice Husk and Bagasse Ash

Proceedings of International Journal of Engineering Research & Technology (IJERT)

Experimental Studies on Self Compacting Concrete by Partial Replacement of Cement by Rice Husk and Bagasse Ash.

International Journal of Engineering Research and Development, Volume 10, Issue 8 (August 2014), PP.01-09.

12Dr. Mohan Kumar S

Professor


Simulation & Analysis of Low Cost WeedierIntl. Journal of Research in Engineering & Technology

Design & Development of Three row Weedier Recent Innovations in Engineering and Technology

13Dr. Mohan Kumar S

Professor


Virtual Design and Simulation of Maize Deshler ASME Journal of Mechanical Design

Design, Simulation and Development of Weedier IEEE Transactions on Automation Science and Engineering

Simulation Based design of low cost automation Inter cultivation Equipment

Emerging Trends in Mechanical & Materials Engineering

14

Prof. Vijay Vithal Bongale

Associate Professor


“Automatic Punching Machine: a low cost approach”,

Page no. 509-517, ISSN 2250-3234, Volume 4, Number 5, 2014.

15PLC Based Automatic Powder Coating Machine Controller

ISSN 0973-4562 Volume 9, Number 7 (2014) pp. 755-763

16“PLC Controlled Low Cost Automatic Packing Machine” ISSN 2250-3234 Volume 4, Number 7 (2014), pp.

803-811

17Prof. L Laxmana Naik

Associate Professor


“Mechanical Properties of Epoxy Based Hybrid Composites Reinforced with Sisal/SIC/Glass Fibers”

Volume 2, Issue 5, August-September,2014, ISSN: 2091-2730.


18

Dr. B .Yogesha

Professor


“Microcontroller based Automated Irrigation System”,

Vol.3, Issue 7. (ISSN (e): 2319-1813). July-2014.

19“Investigation on Mechanical Property 106Evaluation of Jute - Glass Fiber Reinforced Polyester”

e-ISSN: 2278-1684,p-ISSN: 2320-334X, Volume 11, Issue 4 Ver. July- August. 2014, pp. 50-57.

20”Study on Mechanical Characteristics of Unidirectional Sisal/Glass Fiber Reinforced Polyester Hybrid Composites ”

Volume 3 Issue 8, August 2014, ISSN: 585-588.

21“Mechanical Properties of Epoxy Based Hybrid Composites Reinforced with Sisal/SIC/Glass Fibers”


22Review On Comparative Evaluation Of Fiber Reinforced Polymer Matrix Composites”

Volume 2, Issue 5, October 2014.

23Mr. Hareesha. M.

Associate Professor


“Modification of Abrasive Wear Testing Machine and Testing of Materials” International Journal of Science and Research (IJSR)

ISSN Volume 3, 10th October 2014.

24Prof. Sree RajendraAssociate Professor

Automatic Punching Machine: a low cost approach”,

Page no. 509-517, ISSN 2250-3234, Volume 4, Number 5, 2014

25“Automatic Punching Marching controlled by PLC”,

April 25th 2014,T.John Institute of Technology.26Dr. Srinath M .S.Associate Professor

GSM based Automatic Irrigation Control System for Efficient Use of Resources and Crop Planning by using an Android Mobile

27Joining of Inconel-625 Alloy Joint developed through Microwave Energy

28 Mr. Vijaya kumar G TileAssistant Professor


“Energy Analysis and IGCC Plant Technology to improve the efficiency and to reduce the Emission in Thermal Power Plant”

Volume No.03, Special Issue No.03, page No.502-509, May 2014.

29 Mr. Vasundhara M GAssistant Professor


“Study on Mechanical Characteristics of Unidirectional Sisal/Glass Fiber Reinforced Polyester Hybrid Composites”,


30 Mr. Jeevan T.PAssistant Professor


“Modification of Abrasive Wear Testing Machine and Testing of Materials”

Volume 3, 10th October 2014.

31 Mr. Sanjay M RAssistant Professor


“Study on Mechanical Characteristics of Unidirectional Sisal/Glass Fiber Reinforced Polyester Hybrid Composites”,



32Mr. Sanjay M R

Assistant Professor


“Mechanical Properties of Epoxy Based Hybrid Composites Reinforced with Sisal/SIC/Glass Fibers”


“Review On Comparative Evaluation Of Fiber Reinforced Polymer Matrix Composites”

2014; 4(4): 44-476, October 2014

33Dr .M .S. Raviprakasha Professor and Vice Principal


A novel approach in modeling and analysis of vector controlled symmetrical two-phase induction machine for smart grid applications

Matlab

34

Dr. H. N. SureshProfessor


Fabrication and Development of Signal Loss Recovery System for AC Drives

International JournalCondition Monitoring of a model 500VA transformer

39Optimal Placement of Distribution Transformers in Radial Distribution System

International Journal of Smart Grid and Clean Energy.,

40

On the Influence of Steel Geometry on the Induced Currents in Steel Reinforced Concrete Building due to a Nearby Lightning Strike to Ground

IEEE, American Journal of ElTrans. on Electro Magnetic Compatibility

41 Mr. N. A. RanjanAssistant Professor


Studying on ultra capacitor based energy storage & power conservation system for three-phase International Journal

42

Dr. P. C. SrikanthProfessor and HOD

Electronics and Communication Engineering

Stone In-scripted Kannada characters Matching using SIFT

International Journal of Industrial Electronics and Electrical Engineering Vol.2 Issue 6, June 2014, pp 105-110.

43Detection of Human Bladder Cancer Cells Using Image Processing

International Journal of Electronics and Communication Engineering Research and Development Vol.4 , Issue 2, April-June 2014, pp 73-82.

44 Modeling of Photonic Crystal Ring Resonator Temperature Sensor

IJECERD Vol.4, Issue 2, April-June 2014. pp 83-88.

45Implementation and Analysis of Multiple Criteria Decision Routing Algorithm for Wireless Sensor Networks

IJECERD ISSN 2248– 9525 (Print) ISSN 2248 –9533 (Online) Vol 4, Number 2, April- June (2014), pp. 28-35.


46Dr. P.C. SrikanthProfessor and HOD


Faulty Node Recovery And Replacement Algorithm For Wireless Sensor Network

International Journal of Electronics and Communication Engineering Research and Development (IJECERD), ISSN 2248– 9525 (Print) ISSN 2248 –9533 (Online) Volume 4, Number 2, April- June (2014), pp. 36-44.



Minimum Resource Consumptions Routing For Optical Networks

International Journal of Electronics and Communication Engineering Research and Development (IJECERD) , ISSN 2248– 9525 (Print) ISSN 2248 –9533 (Online) Volume 4, Number 2, April- June (2014), pp. 64-72.



A Design and Simulation of Optical Pressure Sensor based on photonic crystal in Sub-Micron Range

International Journal of Electronics and Communication Engineering Research and Development(Vol.4 , Issue 2, April-June 2014, pp 20-27.



MEMS Based Optical Sensor for Salinity Measurement

International Journal of Electronics and Communication Engineering Research and Development (IJECERD), Vol.4 , Issue 2, April-June 2014, pp 1-4.



Implementation and Analysis of Multiple Criteria Decision Routing Algorithm for Wireless Sensor Network

International Journal of Electronics and Communication Engineering Research and Development(IJECERD), Vol.4 , Issue 2, April-June 2014, pp 28-35.



Design and Analysis of Combined Grade Diffusion and Genetic Algorithm for Wireless Sensor Networks

(IJECERD), Vol.4 , Issue 2, April-June 2014, pp 36-44,

52Mr. Murthi Mahadeva Naik. GAssociate Professor


An Approach To Design Rectangular Microstrip Pathch Antenna In S Band By TLM Model IJECERD, Vol 4, No 2, April-June 2014.

Automatic Detection Of Retinal Optic Disc By Means Of PCA And Mathematical Morphology IJECERD, Vol 4, No 2, April-June 2014.

53 Dr. B.R SujathaAssociate Professor

HCCC and SLBC for audio signals ICEECE, EECEMYS-14054-247,Mysore 14 May 2014

54 Dr. B. R. SujathaAssociate Professor and

Electronics and Communication

RP based optimized image compression technique

IJECERD, Vol-4, ISSN 2248-9533, 2nd June, 2014, pp.56-63.

Dean (LSU) Engineering55

VDE Radiography Based Tumor Detection In Lungs

IJECERD, Vol. 4, No.2 ISSN2248-9525(Print),ISSN2248-9533 (Online), June-2014 PP-64-74.

56Title “Analytical modeling of mobile adhoc networks” in Mysore.

International Journal of Engineering and Innovative Technology (IJEIT) March 2013.

57Mrs. Triveni C.L

Assistant Professor


Implementation and Analysis of Multiple Criteria Decision Routing Algorithm for Wireless Sensor Networks

(IJECERD) , ISSN 2248– 9525 (Print) ISSN 2248 –9533 (Online) Volume 4, Number 2, April- June (2014), pp. 28-35.

58Mrs. Triveni C.L.

Assistant Professor


Faulty Node Recovery And Replacement Algorithm For Wireless Sensor Network

International Journal of Electronics and Communication Engineering Research and Development (IJECERD), ISSN 2248– 9525 (Print) ISSN 2248 –9533 (Online) Volume 4, Number 2, April- June (2014), pp. 36-44.

59Mrs. Triveni C L

Assistant Professor


Minimum Resource Consumptions Routing For Optical Networks

International Journal of Electronics and Communication Engineering Research and Development (IJECERD) , ISSN 2248– 9525 (Print) ISSN 2248 –9533 (Online) Volume 4, Number 2, April- June (2014), pp. 64-72.

60 Mrs. Triveni C LAssistant Professor


Design and Analysis of Combined Grade Diffusion and Genetic Algorithm for Wireless Sensor Networks

International Journal of Electronics and Communication Engineering Research and Development(IJECERD), Vol.4 , Issue 2, April-June 2014,pp 36-44.

61 Mrs. Indira BahaddurAssistant Professor


A Design and Simulation of Optical Pressure Sensor based on photonic crystal in Sub-Micron Range

International Journal of Electronics and Communication Engineering Research and Development(IJECERD), Vol.4 , Issue 2, April-June 2014,pp 20-27.

62 Mrs. Indira BahaddurAssistant Professor

MEMS Based Optical Sensor for Salinity Measurement (IJECERD), Vol.4 , Issue 2, April-June 2014, pp 1-4.

63 Ms. Harshitha K RajAssistant Professor

Computer Science and Engineering

A survey on Cloud computing International Journal of Advanced Research in Computer Science & Software Engineering

64 Mr. Gururaj H.LAssistant Professor


Network performance Comparative Analysis of Torns Modified Mesh Interconnection with Source Routing

International Journal of Computer Theory and Engineering (IJCTE)

65 Mr. Keerthi K .SAssistant Professor


Gradiene Descent approach with covert base station to secure localization in Wireless Sensor Network

JAET – 2014 - July


66Mr. Gururaj H.LAssistant ProfessorAssistant Professor


Performance Evaluation of High Speed TCP Variants in Dumbbell Network IOSR Journal of Computer Engineering

67Dr .M.K .RavishankarAssociate Professor and HOD

AutomobileEngineering

Comparative Study of Performance of Four-Stroke Two Wheeler using Ethanol-Gasoline and Butanol Gasoline Blends

International Journal of Engineering Research & Technology (IJERT) (ISSN: 2278-0181), Volume 04, Issue 03, March 2015, Page No. 266 - 270


AutomobileEngineering Comparative Study of Performance of Two

Wheeler: Using Ethanol-Gasoline Blends

International Journal of Science & Research (IJSR) (ISSN: 2319-7064), Volume 03, Issue 10, October 2014, Page No. 1666 - 1699


AutomobileEngineering Design and fabrication of electromechanical

parking brake system

International Journal of Engineering Research & Technology (IJERT) (ISSN: 2278-0181), Volume 03, Issue 10, October 2014, Page No. 230 - 235

70 Mr. A.M. VinodAssistant Professor MCA

A comparative study and WIMAX and LTE as the mobile enterprise network

2014 – International Journal

ISSN – 2320-0790

71

Mr. M.E. Tejamurthy

Associate ProfessorElectrical and Electronics Engineering

Studies on Ultra-Capacitor Based Energy Storage And Power Conversion System For Three-Phase Electric Drives.

Published in International online journal ”International Journal of Current Engineering and Technology ISSN 2277 – 4106 Journal citation – IJCET VOL 4, NO.2, April 2014.

72

Mr. Raghavendra Prasad Deshapande

Assistant Professor


Paper titled “Studies on Ultra-Capacitor Based Energy Storage and Power Conversion system for Three-Phase Electric Drives”.

Published at International Journal of Current Engineering and Technology ISSN 2277 – 4106 (IJCET Vol. 4, No.2, April 2014.

72Prof. Vijaykumar G. Tile Mechanical

Engineering

Exergy analysis and IGCC plant Technology to improve the efficiency and to reduce the emission in thermal power plant-a review

International Journal of Research in Engineering and Technology, 3 and 2321-7308, 2014

2015-16 (37)


1

Dr. H S Mohana



“Extraction of Stone In-scripted Kannada Characters Using Sift Algorithm Based Image Mosaic

International Journal of Electronics & Communication Technology ,

2“Finger Print Recognition using Scale Invariant Feature Transform”.

International Journal of Electrical and Electronic Engineering & Telecommunications

3“Template Matching Method for Recognition of Stone In scripted KannadaCharacters of Different Time Frames based on Correlation Analysis”.

International Journal of Computer and Electronics Research

4 Dr. H S MohanaProfessor and Dean (AA)


“Stone In scripted Kannada Characters Matching using SIFT”,

International Journal of Industrial Electronics and Electrical Engineering



“A Simple Iris Detection Algorithm Based on the Cross-Correlation and Feature Transform Matching Method”

International Journal of Electronics and Communication Technology



“Era Identification and Recognition of Stone In-scripted Kannada Characters Using Artificial Neural Networks”,

International Journal of Engineering Research & Technology (IJERT)

7

Dr. G Shivakumar

Associate Professor and HOD


“Finger Print Recognition using Scale Invariant Feature Transform”.

International Journal of Electrical and Electronic Engineering & Telecommunications

8“Stone In scripted Kannada Characters Matching using SIFT”,

International Journal of Industrial Electronics and Electrical Engineering

9“Era Identification and Recognition of Stone In-scripted Kannada Characters Using Artificial Neural Networks”,


10 “Android Based Autonomous Intelligent Robot for Border Security”

International Journal of Innovative Science , Engineering & Technology

11 Mr. C M Naveen Kumar

Assistant Professor


“Era Identification and Recognition of Stone In-scripted Kannada Characters Using Artificial Neural Networks”,


12“Android Based Autonomous Intelligent Robot for Border Security”

International Journal of Innovative Science , Engineering & Technology


13Dr. Y. Arunkumar

Professor

Industrial and production Engineering

Manufacturing Simulation for determining the Influence of Process Parameters on quality of forgings

International Journal of Research in Engineering & Technology

14 Kalavathi G KAssistant Professor

Department of Mathematics

surface Roughness effect in an infinitely long journal bearing with heterogeneous slip / no slip surface.

Elsevier- Tribology international Journal.

15Mrs. Mohan Lakshmi J

Assistant Professor


Titled International Journal of Emerging Technology & Advanced Engineering (ISSN2250 – 2459).

International Journal of Emerging Technology and Advanced Engineering (IJETAE)

16Mr. Shashidhara H V

Associate Professor

Master of Computer Applications

Low Rate Denial of Service (LDoS) attack – A Survey”.

International Journal of Emerging Technology and Advanced engineering refereed journal (IJETAE)

17Dr. B. Yogesha

Professor


“Investigation on Performance of SI Engine to Improve the Combustion Characteristics by Using Pre-heated fuel” Volume 4 Issue 2, February 2015, ISSN (Online):

2319-7064.

18Dr. B. Yogesha

Professor


“Study on Mechanical Properties of Natural - Glass Fibre Reinforced Polymer Hybrid Composites: A Review”

19Mr. A. N .Basavaraju

Associate Professor


Investigation On Performance Of SI Engine to Improve the Combustion Characteristics by Using Pre-Heated fuel

International Journal Of Science and Research (IJSR) Volume 4,Issue 2, February 2015

20Mr. Rudragouda Kanasogi

Assistant Professor


Performance of Skew or Rectangular Smart Patches for Active Damping of Nonlinear Vibrations of Skew Doubly Curved Laminated Composite Shells

International Journal of Mechanics and Materials in Design,(Springer)DOI: 10.1007/s10999-014-9290-x

21

Prof. Vijaykumar G. Tile Mechanical Engineering

Design and wall temperature optimization of combustor for low calorific values gases application using numerical analysis

International Journal of Engineering Research and Technology, 3 and 2278, 2015.

22Analysis of combustion chamber for low energy fuels application using CFD

International Journal of Engineering Research and Technology, 3 and 2278, 2015

23Recent Developments of a compressed air technology in the vehicles-a review

International Journal of Engineering Research and Technology, 2015


24Prof. L Laxmana Naik., Mechanical

EngineeringArduino controller based smart stick for visually challenged using Zigbee communiction

IJERGS, Vol - 3, Issue 6, 2015

25

Sree RajendraMechanical Engineering

“Process Control of An Automated Lift Pumping Station”,

International Journal for trends in Engineering & Technology (IJTET), Ref: IJTET1301005, ISSN:2349-9303,

26Automatic Path Detection and Navigation of Vehicle Based on Image Processing Technique”,

IJIRT, Volume 2, Issue 1, ISSN: 2349-6002. 2015

27“Automated Shopping and Billing With Product Inventory Management System”,

IJIRT, e-Journal, Volume 2, Issue 2, ISSN 2349-6002. 2015

28Automatic path detection and navigation of vehicle based on image processing technique”,

IJIRT, Volume 2,Issue 1, ISSN: 2349-6002, 2015


EngineeringDesign and Fabrication of Ginger Harvesting Machine

World Journal of Engineering and Technology, 3, 320-338. 2015


EngineeringApplications of Natural Fibers and Its Composites: An Overview

Natural Resources, 7, 108-114, 2016

31 Prof. L Laxmana Naik.,Mechanical Engineering Review on Mechanical Properties of Sisal and

Banana Reinforced Composites

International Journal of Engineering Research and General Science, ISSN 2091-2730, 176 - 179, 2015

32 Sree RajendraMechanical Engineering

“Automated Orbital Pulse TIG Welding”, International Journal for Recent Trends in Engineering & Research, ISSN2455-1457, Impact Factor 3.344, 2016

33M. S. Raviprakasha, B. K. Keshavan, Vishalini Divakr,

Electrical & Electronics Engineering

"A survey on Methods of Evaluation of Distribution Systems Wit Distributed generation",

International Journal of Engineering Research & technology, Vol. 5, Issue 8, pp. 220-226, Aug. 2016.

34

Maruthi. G. S. and Vishwanath Hegde Mechanical

Engineering

“Application of MEMS Accelerometer for Detection and Diagnosis of Multiple Faults in the Roller Element Bearings of Three Phase Induction Motor”,

IEEE Sensors Journal, Vol. 16, No. 1, pp. 145-152, January 2016. (Impact factor 1.762)

35Dr. B Yogesha Mechanical

EngineeringStudies on Mechanical Properties of Jute/E-Glass Fiber Reinforced Epoxy Hybrid Composites

Journal of Minerals and Materials Characterization and Engineering, 4, 15-25, 2016


36 Dr. B YogeshaMechanical Engineering

Applications of Natural Fibers and Its Composites: An Overview

Natural Resources, 7, 108-114, 2016.

37Study on Water Absorption Behaviour of Jute and Kenaf Fabric Reinforced Epoxy Composites: Hybridization Effect of E-Glass Fabric

International Journal of Composite Materials, 6 (2), pp.55-62. 2016

38 Bharath K NII year PG

E & C Engineering

Published Paper in Journal Paper titled “Hybrid compression Using DWT-DCT & Huffman Encoding Techniques for Biomedical Image and Video Applications”.

Published at International Journal of Computer Science and Mobile Computing (A monthly journal of computer science &Information Technology”).

Sl.No. Name of the Faculty Department Title of the Paper Journal details

2016-17 (2)

1L. Laxmana Naik, K.

Gopalakrishna, B. YogeshaMechanical Engineering

Physical and Water Absorption Behaviour of Sisal Glass Fiber Reinforced Polymer based

Composites

American Journal of Materials Science 2016, 6(4): 91-94 DOI:105923/j.materials.20160604.02

2 Dr .Amarendra. H.JAdvance Materials and Manufacturing

Applications (IconAMMA’ 16)

International Conference on Advance Materials and Manufacturing Applications (IconAMMA’

16) During on 15th-16th July 2016

Details of research publications in National refereed Journals since joining TEQIP-II project (for the period 2012-2017)


2012-13 (2)

1 Dr. K. P. RavikumarAssociate Professor

Automobile Engineering

Statistical Analysis and Reliability Estimation of IPM IUP Journal of operation management No.1, Feb. 2013 PP 7-20

2 Mr. Srinath. M .S,Associate Professor


Machinability aspects of Aluminum alloy on CNC Machine

IJMEMS, 5[2], 123127, 2012

2014-15 (3)

1 Mr. H.V. ShashidharaAssociate Professor & HOD

M.C.A

Survey on Robust RED Algorithm to counter Low-Rate Denial-of-Service

ISBN 978-163173186-0 Vol 2: page no:53-57

2 Mr. Tejonidhi M RAssistant Professor

Parallel merge sort based performance evaluation and comparison of MPI and PVM

ISBN- 978-1-4673-5759-3, Page No: 530-534

3 Tejonidhi M R Parallel merge sort based performance evaluation and comparison of MPI and PVM

ISBN- 978-1-4673-5759-3, Page No: 530-534


2015-16 (4)

1 Prof. H.V. ShashidharaMCA

“Low rate Denial of Service (LDoS) attack – A Survey”, ISSN 2250–2459, Vol 4, Issue 6, June 2014

ISSN 2250–2459, Vol 4, Issue 6

2 Prof. Vijaykumar G. Tile Mechanical

Engineering

Solar energy: review of potential green & clean energy

for coastal and offshore applications

Indian journal of scientific research, 0976-2876,

2016.

Measurement of thermochemical properties of some

metal hydrides-titanium (ti), misch metal (mm) and

lanthanum (la) based alloys a-review


2016.

A review of thermal energy storage technologies and

control approaches for solar cooling


2016.

3 M.R.Sanjay Mechanical

Engineering

Studies on Mechanical Properties of Banana/E-Glass

Fabrics Reinforced Polyester Hybrid Composites.

JMES 7(9) (2016) 3179-3192, ISSN: 2028-2508

4 M.R.Sanjay,

G.R. Arpitha,

Mechanical

Engineering

Experimental Investigation on Mechanical Properties of

Hemp/E-Glass Fabric Reinforced Polyester Hybrid

Composites

Journal of Materials A& Engineering Structures 3

(2016) 117-128, 2016.

Details of Research papers presented in International Conferences held in India by faculty members

Sl. No Name of the Faculty Designation & Department Paper Title Conference details

2012-13 (7)

1 Ms. Triveni

Assistant ProfessorElectronics and Communication Engineering

“A New Highly Secure and Efficient Friend Based Routing Algorithm for Wireless Sensor Networks”.

An International Conference on Current Trends in Engineering & Management (ICCTEM 2012) In VVCE, Mysore at 12-14 July 2012.

2 Prof. Y M Shahidhara Associate ProfessorAutomobile Engineering

Title “stability and Tribological studies on environment friendly vegetable based oils and evaluation of deep drawing of AA 5083 sheets using green lubricants-pongammia pinnata and jatropha curcass”.

International conference on Industrial Tribology organized by Tribology Society of India and Indian Oil Corporation Ltd. During 9th Dec 2012 at PUNE

3 Ms Geetha KiranAssociate ProfessorComputer Science and Engineering

“Automatic Rectification of Perspective Distortion from a Single Image Using Plane Homography”.

(ICERECT-12) held at PESCE, Mandya on 21 & 22nd DEC 2012

4

Dr. S.Mohan Kumar ProfessorMechanical Engineering

Enabling collaborative technologies for effective e-learning within and outside class rooms

ISTE Convention at PESIT, 2012

5 Research and Development Scenario in Autonomous Engineering Colleges

First Conclave of VTU Autonomous Colleges at PESIT, Bangalore, 2012

6Bioengineering for Customized Orthodontic Applications – Implant, Bracket & Dental Vibrator

International Conference of Aeronautical and Mechanical Engineering (ICAME12) at Bangkok, 2012

7Scope and Application of Collaborative Tools and Digital Manufacturing in Dentistry

International Conference of Aeronautical and Mechanical Engineering (ICAME12) at Bangkok

2013-14 (4)

1 Ms. Triveni


Titled “voip based embedded system design for communication applications

An International conference on Information Technology, Electronics & communication on March 30-31 2013 held at Bangalore.

2Mr. Dushyanth Kumar K R Assistant Professor

Mechanical Engineering”Application of lean concepts to supply chain management: review”

An International Conference on Advanced Materials, Manufacturing, Management & Thermal Sciences (AMMMT-2013) at SIT, Tumkur from 3 & 4th may 2013.

3 Mr. G Shiva KumarP A Vijaya

Associate ProfessorElectronics and Instrumentation and Engineering

“An Improved Artificial Neural Network Based Emotion Classification System for Expressive Facial Images”.

International Conference on VLSI, communications, advanced Devices, Signals & systems and networking (VCASAN-2013) at BNMIT, Bangalore from 17-20th July 13.


4 Dr. Vishwanath HegdeProfessorElectrical and Electronics Engineering

“Mathematical Analysis of Unbalanced Magnetic Pull and Detection of Mixed Air gap Eccentricity in Induction Motor by Vibration Analysis using MEMS Accelerometer”.

At the IEEE International conference on “Condition Assessment Techniques in Electrical Systems” scheduled to be held during 6 – 8th December 2013 at Kolkata.

2014-15 (26)

1 Ms. Geetha Kiran AAssociate Professor Computer Science and “V2 Walk through a Stitched Image”.

Both Publication and Oral Presentation in the International Conference of Signal and Image Processing (ICSIP’14) held at BNMIT, Bangalore


14Rajanna, S. and Saini, R. P

Mechanical Engineering “Optimal modeling of an Integrated Renewable Energy System with Battery storage for off grid Electrification of remote rural area”.

First international conference on Power Electronics Intelligent Control and energy system (ICPEICES) 2016,DTU,Delhi,India

15Rajanna, S. and Saini, R.P. Mechanical Engineering

“Selection of Suitable Strategy with peak load shifting based DSM of an Integrated Renewable Energy System for a remote region”,

First international conference on Power Electronics, Intelligent Control and energy system (ICPEICES) 2016,DTU,Delhi,India.

16 Dr. YOGESHA ProfessorMech. Dept.

1st International Conference on Materials Design & Applications 2016

International Conference,Faculty of Engineering of the University of Porto, Portugal, 30-06-2016 to 01-07-2016

17 M SHASHANK LINGAPPA

Research Scholar Mech. Dept.

Application of x-ray diffraction on thin Films & Bulk Materials

IIT, HYDRABAD, 4th to 9th July 2016

18 MADHU K S Assistant ProfessorMech. Dept.

Application of x-ray diffraction on thin Films & Bulk Materials

IIT, HYDRABAD, 4th to 9th July 2016

19Rajanna, S. and Saini, R.P.

Mechanical Engineering “Modeling of Integrated Renewable Energy System for Electrification of a Remote Area in India”,

Renewable Energy, 90,175-187. (2016),

20 GURURAJ H L Assistant ProfessorC S

OPEN SOURCE NETWORK EXPERIMENTATION

Wireless information Networking Group, Dept. of Computer Science & Engineering National Institute of Technology Karnataka Surathkal, P.O. Srinivasanagar, Mangalore, 6thto 8th July 2016

2016-17 (5)

1 SANJAY M R Research Scholar Mech. Dept.

International Conference on Technologically Advanced Materials

International Conference, M R Sanjaya*, B Yogeshaa "Department of Mech. Eng. MCE, Visvesvaraya Technological University, Belagavi,University of Delhi, Delhi. 7th to 11th November 2016

2 YASHAS J Assistant ProfessorE & C "VLSI Design Using CADENCE" ATME College of Engineer, Mysore. 14th to 19th July

2016

3 Sunitha R Assistant Professor C S ICETETS-2016 International Conference, Kings College of Engineering

Punalkulam, 23/02/2016 to 27/02/2016.

4 Kavyasri M N Assistant Professor C S ICETETS-2016 International Conference, Kings College of Engineering

Punalkulam, 23/02/2016 to 27/02/2016.

5 Dushyanth Kumar K RAsst. Proff. Mechanical Engineering

Lean Supply chain performance metrics for the better manufacturing process

International Conference on Advanced Materials, Manufacturing Management & Thermal Sciences (AMMMT-2016) on September 23td & 24th 2016

Details of Research papers presented in National Conferences held in India by faculty members


2013-14 (25)

1 Ms. Indira Bhaddur


Title “Novel Defense Mechanism Against Data Flooding Attacks In Ad Hoc Network

. At Vivekananda college of engineering for women, TIRUCHANAGODE, TN.during 4-6 July 2013.

2Mr. Krishnaiah A JRamesh H NShilpa Shet S

Associate ProfessorCivil Engineering

Paper Title “Consolidation Behavior of Black Cotton Soil and Mine Tailings Mixtures Treated With Lime”.

Organized by Indian Geotechnical Conference (Geotechnical Advances and Novel Geomechanical Applications (GANGA) at Indian Institute of Technology, Roorkee from December 22-24, 2013

3 Mr. A.M. VinodAssistant Professor M.C.A

Performance evaluation of secured cooperative routing protocol in cognitive radio ad-hoc networks

2014- National Conference

4 Heuristics based optimal filtering of malicious traffic 2014- National Conference

5Dr. G .K. Purushothama Professor


Comparative Analysis of PID and Fuzzy PI Controller for Speed Control DC Motor, of Multidisplinary

National Conference on Electrical & Electronics Engg.,

6 Mr. Tejonidhi M RAssistant Professor

M.C.A



7 Heuristics based optimal filtering of malicious traffic 2014- National Conference

8A.M. Vinod



9 Heuristics based optimal filtering of malicious traffic


10Tejonidhi M R Performance evaluation of secured

cooperative routing protocol in cognitive radio ad-hoc networks


11 Tejonidhi M R Heuristics based optimal filtering of malicious traffic


12 Dr. Vishwavantha Hegde Proff. & HOD

Electricals & Electronics Engineering

Comparative Study on Induced Currents in Steel Reinforced Building due to a Nearby Lightning Strike to Ground and a Nearby elevated Object



13

Dr. K.ManjunathProfessor and HOD Civil Engineering

Elastic Module of Cement Mortars with Granular Blast Furnace Slag as Partial Replacement to Natural Sand


14

Separation of organic based oil and grease from restaurant wastewater using a horizontal flow batch 2014- National Conference


6 Dr. G K Purushothama Electrical and Electronics Engineering

Fault Diagnosis of VSI fed Induction Motor Drive using Fuzzy Logic Approach, Proceedings


7 Mr. Raghavendra Rao Assistant ProfessorMechanical Engineering

“Design and Wall temperature optimization of combustor for low calorific value gases applications using Numerical Analysis

National Conference on “Emerging Research Areas in Mechanical Engineering at (REVA Institute of Technology and Management, Bangalore during 27 – 28th March 2015.and the Paper will be published in International Journal of Engineering Research and Technology8 Mr. Vijayakumar G Tile

Assistant ProfessorMechanical Engineering “Analysis of Combustion Chamber

for Low Energy Fuels Applications

9 B Yogesha Assistant Professor Mechanical Engineering

Study on Mechanical Properties of Natural - Glass Fibre Reinforced Polymer Hybrid Composites: A Review

Elsevier, Materials Today: Proceedings, 2015

10 MADHU P Assistant ProfessorMech. Dept.

Mathematical Modeling & Simulation for Researchers, Engineers & Scientists (MMSFRES)

SVNIT, Surat, Gujarat. 11th to 15th July 2016

11 Dr. SRINATH M S ProfessorMech. Dept.

"Melting of tin using muffle furnace & microwave energy & its Characterization"

Amrita Vishwa Vidyapeetham, Bangalore. 14th to 16th July2016

Details of faculty travelled abroad for various purpose under TEQIP-II for the academic year 2012 – 15 under the head R & D

Sl. No Name of the Institution & State Name and Designation of persons who visited abroad Purpose of Visit Duration of visit

(from…To…..)No. of Days

01 9th international conference on fatigue Damage of Structural Materials held at Hyannis, MA, USA.

DR. C. V. Venkatesh, Professor in Mechanical Engineering

Presented a research paper in an International conference.

16 to 21st September 2012 6 days

021st International Conference on Concrete Sustainability (ICCS 13) held at Toshi Centre Tokyo.

DR. M S Kallappa, Professor and HoD, Civil Engineering


27 to 29th May 2013 3 days

033rd International conference on Smart grid and Clean Energy Technologies (ICGSCE-2013) held at Kuala Lumpur, Malaysia.

Prof. Vishwanath Hegde, Professor in E & E Engineering


11 to13th October 2013 3 days

04An International Conference At organized by International Conference on Applied Business & Economics (ICAB -13) held at New York, USA.

Mr. Dushyanth Kumar K. R.Associate Professor, Mechanical Engineering.


2nd to 04th October 2013 3 days

05An International Conference organized by The Minerals, Metals & Materials Society at Montreal, Quebec, Canada.

Dr. AmarendraAssociate Professor, Mechanical Engineering.


27 to 31st October 2013 5 days

06An International Conference organized by The Minerals, Metals & Materials Society at Montreal, Quebec, Canada.

Dr. Srinath M. S.Associate Professor, Mechanical Engineering.


27 to 31st October 2013 5 days

07

2nd International Conference on Manufacturing Engg. and Technology for Manufacturing Growth(METMG2014) at Miami, State of Florida, USA

Dr. B. Yogesha,Associate Professor, Mechanical Engineering.

To present a research paper in an International conference.

20 & 21st January, 2014. 2 days

08

2nd International Conference on Manufacturing Engineering and Technology for Manufacturing Growth (METMG2014) at Miami, State of Florida, USA.

Dr. Pradeep S.Associate Professor, Mechanical Engineering.


20 & 21st January, 2014. 2 days

09

9th “Asia Pacific International Conference on Lightning” (APL-2015” organized by Institute of Electrical Installation Engineers of Japan & Japan Lightning Protection System Industrial Association at Nagoya, Japan.

Dr. Vishwanath Hegde, Professor & Head, Department of E&E Engineering


23 - 27th June 2015 7 days

10International Conference on Advances in Computing, Control and Networking (ACCN-2015) to be held in Bangkok during 28-29, August 2015.

Dr. Geetha KiranProfessor & HeadDepartment of Information Science & Engineering


28-29, August 2015 4 days

11

International Conference,Faculty of Engineering of the University of Porto, Portugal, 1st International Conference on Materials Design & Applications 2016.

Dr. YOGESHAProfessorMech. Dept.


30-06-2016 to01-07-2016 2 days

Details of Research publications in International/National Conferences by UG/PG students held in India

Sl. No. Student Name Department Paper Title Conference Title, Venue and Date2012-13 (09)

01Chethan P [email protected]

II year UGCivil Engineering

Titled “Restrengthening of Structures Against Corrosion”

Attended National level technical civil symposium at NIRMAAN-12 BMSCE, Bangalore during 09 - 10th Nov 2012.

02 Ashwini B O4th YearElectronics and Communication

“Manet Based Disaster Management Module Using Networks Simulator (NS2)”.

National Conference on Recent Advances in Electronics and Communication Engineering – (NCRAECE-13) Organized by RNS Institute of Technology, Bangalore held on May 03rd 2013.

03Santhosh H P

II Year PGCivil Engineering

The Influence Of Masonry Infill On The Base Isolated Structure

International Conference held atJawaharlal Nehru University, New Delhi – 5 & 6TH

June 2013.

04Santhosh H P Seimic Base Isolation Of ARc Framed

StructureNational Conference at SVSCE, Coimbatore On 24.04.2013

05Yashas II year PG

E & C Engineering

Titled “A Comparative Study of Routing Protocols and Routing Metrics in Wireless Mesh Networks”

3rd National Conference on RCCIT-13 at MS Engg. college ,Bangalore ON 29TH April 13.

06Nethashree N R

II year PGMechanical Engineering

“Automation of alternator test Bench using Siemens S7 -300”

Attended International conference on Advanced Material, Manufacturing and Management Sciences at SIT, 3 – 4th May 13

07Vikram and Tharanath Salyam

Civil Engineering Has attended the State Level Technical Fest organized by Civil Engg. Association of S.T.J. Institute of Technology at Ranebennur on 19th April 2013 For the Event “CAD MASTERS”.

08

Mr. Devaraju T SK Rama RajuM Shyam KumarM S KalappaNagesh R Iyer

II year PGCivil Engineering

Paper Titled “Analysis of Water Tanks Subjected to Seismic Loads”.

At International Conference on Advances in Engineering and Technology – 2013 At MGR Educational and Research Institute University, Chennai, Tamil Nadu, India during 5 – 6April 2013

09 Santhosh Kumar K B II year PGE & C Engineering

“Multipath Routing for Distributed Networks”.

2 days National Conference on Advances in Computer Applications (NCACA-13) at SSIT, Tumkur on 16 & 17th May 2013.

Sl. No. Student Name Department Paper Title Conference Title, Venue and Date

2013-14 (

1 Raghu SII year PGE & C Engineering

Titled “Design and simulation of High Convergence Multistage Algorithms for Mobile Communication”

National Conference on CRT – 2013 by SDMIT, Ujjire, D.K DIST. On 27 -28th Sep. 2013.

2 Karunakara G S II year PGE & C Engineering

Paper Titled “Design & Simulation of Adaptive Filtering Algorithms for Active Noise Cancellation”.

National Conference on Recent Advances in Electrical & Electronics Engineering (NCRAEEE-2013) Sponsored by VTU, Belgaum at University BDT College of Engineering, Davanagere On June 17 – 18, 2013.

3 Revanna B R II year PGE & C Engineering

Paper Titled “Image Denoising Using Patch Based Wiener Filter”.

International Conference on Information & Communication Engineering (ICICE-13) at Dr. AIT, Bangalore during 28 – 29th June 2013

4Shrishail BhatDr. B R SujathaKiran V Shanghag

II year PGE & C Engineering

Paper titled “BER & PAPR Performance Comparison of SC-FDMA with OFDMA”.

At National Conference on Advances in Computer Applications (NCACA – 2013) on May 16 – 17th 2013. At SSIT, Tumkur.

5 Raghu S II year PGE & C Engineering

Titled “Design and simulation of High Convergence Multistage Algorithms for Mobile Communication”

National Conference at SIT, Tumkur on 29th & 30th August 2013.

6 Sachin Raj SIV yearE & C Engineering

Project demo on “Blind person Assisting Device”.

National Level Technical Fest conducted in BCE, Shravanabelagola, on 9th may 2013.

7 Puneeth Kumar G B II year PGE & C Engineering

“A New Data Hiding Method Using Adaptive Pixel Pair Matching”

2 days National Conference on Advances in Computer Applications (NCACA-13) at SSIT, Tumkur on 16 & 17th May 2013.

8 Kishore P II year PGE & C Engineering

“Design and Implementation of Efficient Route Discovery Algorithm with the aim of Increasing Network Lifetime in MANET”.

At National Conference on Advances in Computer Applications on May 16 – 17th 2013., Sri Siddhartha Institute of Technology, Tumkur.

9 Divya V N IV year UGE & C Engineering

“A Robust Image Steganographic Technique”.

At International Conference on Multimedia processing, communication and Information Technology” Conducted by Jawaharlal Nehru National College of Engineering, Shimoga during 19 – 21st December 2013.

10 Ms. Sushma Sheshadri4th Year UG StudentE & I Engineering

“Social Exclusion of Women, Disabled and other Vulnerable Groups”.

National Level Conference At Mangala Gangothri, Mangalore University, Karnataka during 06th & 07th February 2014.


11 Ms. Sushma Sheshadri4th Year UG StudentE & I Engineering

“A Cooperative Diversity Based Handoff System”.

At National Level Technical Symposium, at SIT Tumkur, held on 22/02/2014.

12

Pramod ShettyP SamanthaP Banerjee,T. KuilaN C Murmu

MechanicalDepartment

“Tire Pyrolysis Oil as a Lubricant”.

At Tribology Society of India Announces “ASIATRIB – 2014” at Jaypee Palace Hotel & convention Centre, Agra, India during 17 – 20 February 2014.

13 Rajith Kumar B K II year PGE & C Engineering

“”Era Identification and Recognition of Stone In-scripted Kannada characters Using Artificial Neural Networks”.

At 2nd National Conference on “Innovation in Computing and Communication Technology” Organized by Department of CS & Engineering during 21st March 2014.

14 B Nishanth PrabhuIII year UG studentMechanicalDepartment

“Elephant Detectors Using Infrasound Recording System”.

An Annual Technical Symposium ‘MECHANICA-14, conducted by Mechanical Engineering Association, IIT, Madras during 21st to 23rd March 2014.

15 Aditya MIII year UG studentMechanicalDepartment

“Thermo Electric Generators in Internal combustion Engines Using Graphene”.

An Annual Technical Symposium ‘MECHANICA-14, conducted by Mechanical Engineering Association, IIT, Madras during 21st to 23rd March 2014.

16 Navya KII year PGE & C Engineering

“Stone Inscripted Kannada Characters matching Using SIFT”.

An International conference on Electrical, Electronics and Computer Engineering organized by Asian Society for Academic Research (IRAJ-14) during 05th April , 2014

17Sushma Sheshadri 4th Year UG

studentE & I E Department

“Design of a Virtual-Instrumentation System for a Machining process”.

A National Level Technical Symposium TECHZONE 2014 at JNUCE, Shimoga during 7-9th March 2014.

18Niranjan DasarTriveni C LT Srinivas

I year PGE & C Engineering

A Study on “Link Weight Performance Analysis in an Intra-domain Networks”.

An International conference on Emerging Trends in Engineering and Technology by TECHNORETE on 27th April 2014.


19 Rashmi T S II year PGE & C Engineering

“Design and analysis of Combined Grade Diffusion and Genetic Algorithm for Wireless Sensor Network”

An International conference on Emerging Trends in Engineering and Technology (ICET-2014) Organized by TECHNORETE at Hotel Pai Vaibhav, Bengaluru on 27th April 2014.

20 Shashank S Bhagwat II year PGE & C Engineering

“Implementation and Analysis of Multiple Criteria Decision Routing Algorithm for Wireless Sensor Network”.

An International conference on Emerging Trends in Engineering and Technology (ICET-2014) Organized by TECHNORETE at Hotel Pai Vaibhav, Bengaluru on 27th April 2014.

21Rajeshwari S II year PG

E & C Engineering

“Design and Simulation of Optical Pressure Sensor based on Photonic Crystal in Sub-Micron Range’.

An International conference on Emerging Trends in Engineering and Technology (ICET-2014) Organized by TECHNORETE at Hotel Pai Vaibhav, Bengaluru on 06th April 2014.22

Shruthimala N S II year PGE & C Engineering

“MEMS Based Optical Sensor for Salinity Measurement”.

23Devaraja Naik R L II year PG

E & C Engineering

“An Approach to Design a Rectangular Microstrip Patch Antenna In S Band by TLM model”

An International conference on Emerging Trends in Engineering and Technology (ICET-2014) Organized by TECHNORETE Bengaluru on 26th

& 27th April 2014.

24 Ajey Kumar II year PGE & C Engineering

SDRINA: Secured and Reliable Data Routing Approach for In-Network Aggregation in Wireless Sensor Networks.

Participated in 6th National Conference on Recent Trends in Electronics and Communication Engineering organized at SJB Institute of Technology on 10th May 2014.

25 Uday J II year PGE & C Engineering

“Implementation of Modula 2n + 1 Adder and Multiplier”

Published in International Journal of Electronics and Communication Technology (Cosmic Journal) volume 5.2, Issue 2, April-June 2014.

26 Chethana Krishna P3rd Year UG StudentCivil Engineering

“A Research on Cocoa Pod Husk Activated Carbon for Textile Industrial Wastewater Colour Removal”.

Participated in National conference on Recent Innovations in Engineering and Technology – 2014 organized by, Bheemanna Khandre Institute of Technology, Bhalki, On 3 & 4 May 2014.


27 Pooja N4th Year UG studentE & C Engineering

“Implementation of VANET routing algorithm for vehicular traffic information”

Participated in International Conference on Electrical, Electronics and Computer Engineering ICEECE – Mysore organized by IRAJ Research Forum in association with Asian Society for Academic Research held at Komfort Suites, No. 66, 66A, Vivekananda Road, Yadavagiri, Mysore on 10th May 2014.

28 Usha M4th Year UG studentE& C Engineering

“Real time Implementation of Optical flow switching”.

Participated in International Conference on Electrical, Electronics and Computer Engineering (ASAR-ICEECE-2014) organized by ASAR – Mysore Chapter, India Mysore on 10th May 2014.

29 Rajith Kumar BK II year PGE & C Engineering

“Extraction of Stone in-scripted Kannada Characters Using Sift Algorithm Based Image Mosaic”.

Published in International Journal of Electronics and Communication Technology (IJECT) (Cosmic Journal) volume 5.09, Issue 2, April-June 2014 date 30th April 2014.

30 Devaraja Naik R L II year PGE & C Engineering

“Design and analysis of Microstrip patch antenna (MPA) by TLM model using MATLAB as well as EM Simulator for Wireless application”.

Participated in 7th IETE Conference on RF & Wireless “Icon RFW” Organized by HKBK College of Engineering, Bangalore on 08 – 10th May 2014.

31 Devikarani H S4th Year UG studentE& C Engineering

“Design and Implementation of Multi Carrier CDMA for Wireless Communication Systems

Participated in (ASAR-ICEECE-2014) organized by Asian Society for Academic Research in association with IRAJ Research Forum Mysore on 14th May 2014.


42 Shashank LingappaII year PGMechanicalEngineering

“PLC Controlled Low Cost Automatic Packing Machine”

Participated in an 4th International Conference on “Advances in Mechanical, Material, Manufacturing, Automobile, Aeronautical Engineering and Applied Physics” (AMAEAP-2014) Organized by “Krishi Sanskriti” at Jawaharlal Nehru University, New Delhi during 7 & 8th June 2014.

43 Vikash V“PLC Based Sensor Operated Obstacle Detection Carriage Vehicle”.

44 Arun S“Automatic Punching Machine – a Low cost approach

45 Darshan P “PLC Based Automatic Powder Coating

Machine Controller”.

46 Navya K II year PGE & C Engineering

A Simple Iris Detection Algorithm Based on the Cross Correlation and Feature Transform Matching Method

Published in International Journal on Electronics and Communication Technology (IJECT) Volume 5.2, April – June 2014.

47Tanveerkhan Guttal II year PG

E & C Engineering

Automatic Detection of Retinal Optic Disk by Means of PCA and Mathematical Morphology”.

Participated in International Conference on Recent Advances in Electronics, Computer Science and Information Technology (ICECSIT-14) organized by EFERP-India at Pai Vaibhav Bangalore during 08th June, 2014

48 Taresh B M II year PGE & C Engineering

“Detection of Human Bladder Cancer cells Using Image Processing”.

Participated in International Conference on Recent Advances in Electronics, Computer Science and Information Technology (ICECSIT-14) organized by EFERP-India at Pai Vaibhav Bangalore during 08st June, 2014

49SharanbasappaChattarji

II year PGE & C Engineering

“RP Based Optimized Image Compressing Technique”.

International Conference on Current Advances in Electronics, Computer Science, Software and Information Technology (ICECSSIT – 2014) Organized by ISER-India at Hotel Pai Vaibhav, bengaluru on 22nd June 2014.

50 Arun Kumar V II year PGE & C Engineering

“VDE Radiography Based Tumor Detection in Lungs”.

51 Nagesh CII Year PG student in E & E Engineering

An Improved DTC for Three – Level Inverter – Fed IM Sensorless Drive

2nd International conference “Current Trends in Engineering & Technology sponsored by IEEE Organized by Akshaya college of Engineering & Technology at Akshaya college of Engineering and Technology, Coimbatore during 8th July 2014.

52 Navya KII Year PG student in E & E Engineering

Interactive segmentation for Character extraction in Stone Inscriptions.


54 Rajith Kumar B K II year PGE & C Engineering

Era Identification and Recognition of Ganga and Hoysala Phase Kannada Stone Inscriptions Characters using Advance Recognition Algorithm

International Conference on Control Instrumentation communication and Computational Technologies organized by the Noorul Islam centre for Higher Education, Noorul Islam University, Kumaracoil, Thuckalay, TN, during 10 & 11th July 2014.55

Uday J II year PGE & C Engineering

Implementation of 32 – bit Area – Efficient Hybrid Modula 2n + 1 Adder and Multipler.

56 Shwetha H S II year PG student (E & E

Refiner Disc Movement Control Using RMC Motion Controller.

National Conference on Developments in the Domain of Electrical Engineering” (NCDDEE-14)

Engineering)by Sri Siddhartha Institute of Technology, Tumkur, during 10 & 11th July 2014.

57Shwetha K S II year PG

E & C EngineeringNode Replication Detection Using XED EDD and Reliable Route.

National Conference on Current advances in Electronics, Computer Science, Software and Information Technology (ICECSSIT-2014) Organized by ISER-India at Hotel Pai Vaibhav, Bangalore on 22nd June 2014.

58 Anand N K 4th Year UG studentMechanical Engineering

Evaluation of Erosion Behaviour of Ni based cladding developed through Microwave Energy

National Conference on “Emerging Research Areas in Mechanical Engineering organized by Department of Mechanical Engineering, Reva University Bangalore during 27 & 28th March 2015.

59 Kiran Kumar

62MisbhaMaheenNida Afreen

Cloud Computing using Wireless sensor technology for agricultural application

MCE Hassan, 2016

64Sushma J AGagana N BhushanKainatZeba

Big data for security intelligence MCE Hassan, 2016

65 LekhaUmesh Chandra Data Analytics MCE Hassan, 2016

66Geetha K NSoundarya M

Underwater wireless communication networks

MCE Hassan, 2016

67Pradyumna ChandraPooja Chandran

Three factor Authentication MCE Hassan, 2016


68

Niranjan L CSuhas A ANikhil KulkarniSachin J

Water assessment of Hassan District MCE Hassan, 2016

69Vijay Kumar LShiv Kumar H L

Improving performance of an engine block by varying cooling fluids

MCE Hassan, 2016

70Umesh MPreethi B S

Solar energy Application: coastal & offshore MCE Hassan, 2016

71 Eranna T Shower Irrigation MCE Hassan, 2016

72Sridhara RGuhan S

Nanotechnology in medical field MCE Hassan, BIT Bangalore, 2016

73B.S.ShreyaS.M Srikanth Pradyumna

Next Generation Satellite Navigation System in India

MCE, Hassan, 2016

74Thrimurthi MAdithya B A

Comparative analysis of different deployment techniques in Wireless Sensor Network

MCE, Hassan, 2016

75Suraj S RUsha N

Computer Vision-based Adaptive Cruise Control System

MCE, Hassan, 2016

76Pooja J.O

Devika H.R

MEMS Accelerometer Based Nonspecific-User Hand Gesture Recognition

MCE HASSAN, 2016

77 Pramoda N V

Advanced Low Power CMOS Design to reducepower consumption in CMOS Circuit for VLSIDesign

MCE HASSAN, 2016

Documents

mcehassan.ac.inmcehassan.ac.in/files/FACULTY-RESEARCH-PUBLICATIONS.docx · Web view2nd International conference “Current Trends in Engineering & Technology sponsored by IEEE Organized