M. L. V. Textile & Engineering College, Bhilwara(An autonomous institute of Government of Rajasthan)

ek- yk- oekZ VsDlVkby o bathfu;fjax dkWyst] HkhyokM+k

¼jktLFkku ljdkj dk Lok;Ùk”kk’kh laLFkku½[A Participant Institution of Technical Education Quality Improvement Program (TEQIP) – III under Subcomponent 1.1]

INVITATION FOR QUOTATION

TEQIP-III/2017/mteb/Shopping/8/ 20-Nov-2017

To,

Sub: Invitation for Quotations for supply of Goods

Dear Sir,

1. You are invited to submit your most competitive quotation for the following goods with

item wise detailed specifications given at Annexure I,

S. No

Brief Description Qty

Delivery Period (In days)

Place of Delivery Installation Requirement (if any)

1 10 MHz AM / FM Function-Pulse Generators with 40MHz Frequency Counter

3 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

2 100 MHz Dual channel Digital Storage Oscilloscope

2 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

3 8085 Microprocessor Kit 5 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

4 Adder and Subtractor Trainer Kit 2 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

5 Advanced Analog Circuits Development Platform & Analog Electronics teaching software

1 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

6 Advanced Digital Workstation 1 40 MLVTEC. Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

7 Analog-Digital Circuits Development Platform

1 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

8 Counters Trainer Kit 2 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

9 Flip-Flop Trainer Kit 2 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

10 Interfacing Module for Microprocessor Kit

1 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

11 Multiplexer and De-multiplexer Trainer Kit

2 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

12 Operational Amplifier Lab 5 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

13 Parallel Adder and Subtractor Trainer Kit

2 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

14 Ready to Use Board with detachable modules.

1 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

15 Shift Registers Trainer Kit 2 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

16 SOP & POS Implementation Trainer Kit

2 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

17 Understanding and Experimentation with Digital ICs

1 40 MLVTEC, Pansla Choraha, Pur Road, Bhilwara (Raj.)

Yes

18 Understanding Microprocessor 8085 Kit

1 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

19 Universal Gates Trainer Kit 1 40 MLVTEC, Pansal Choraha, Pur Road, Bhilwara (Raj.)

Yes

20 Universal IC Tester 1 40 MLVTEC, Pansla Choraha, Pur Road, Bhilwara (Raj.)

Yes

2. Government of India has received a credit from the International Development Association (IDA) towards the cost of the Technical Education Quality Improvement Programme[TEQIP]-Phase III Project and intends to apply part of the proceeds of this credit to eligible payments under the contract for which this invitation for quotations is issued.

3. Quotation,3.1 The contract shall be for the full quantity as described above. 3.2 Corrections, if any, shall be made by crossing out, initialing, dating and re writing.3.3 All duties and other levies payable by the supplier under the contract shall be included

in the unit price.3.4 Applicable taxes shall be quoted separately for all items.3.5 The prices quoted by the bidder shall be fixed for the duration of the contract and

shall not be subject to adjustment on any account.3.6 The Prices should be quoted in Indian Rupees only.

4. Each bidder shall submit only one quotation.5. Quotation shall remain valid for a period not less than 55 days after the last date of

quotation submission.6. Evaluation of Quotations,

The Purchaser will evaluate and compare the quotations determined to be substantially responsive i.e. which6.1 are properly signed ; and6.2 confirm to the terms and conditions, and specifications.

7. The Quotations would be evaluated for all items together.8. Award of contract:

The Purchaser will award the contract to the bidder whose quotation has been determined to be substantially responsive and who has offered the lowest evaluated quotation price.8.1 Notwithstanding the above, the Purchaser reserves the right to accept or reject any

quotations and to cancel the bidding process and reject all quotations at any time prior to the award of contract.

8.2 The bidder whose bid is accepted will be notified of the award of contract by the Purchaser prior to expiration of the quotation validity period. The terms of the accepted offer shall be incorporated in the purchase order.

9. Payment shall be made in Indian Rupees as follows:Delivery and Installation - 90% of total cost

Satisfactory Acceptance - 10% of total cost

10. All supplied items are under warranty of 24 months from the date of successful acceptance of items.

11. You are requested to provide your offer latest by 12:30 hours on 05-Dec-2017 .12. Detailed specifications of the items are at Annexure I.13. Training Clause (if any) Yes14. Testing/Installation Clause (if any) Yes15. Information brochures/ Product catalogue, if any must be accompanied with the quotation

clearly indicating the model quoted for. 16. Sealed quotation to be submitted/ delivered at the address mentioned below,

PrincipalMLV Textile and Engineering CollegePur Road Pansal Chauraha Bhilwara 311001 (Raj.)

17. We look forward to receiving your quotation and thank you for your interest in this project.

(Authorized Signatory)Name & Designation

Annexure I

S. No

Item Name Specifications

1 10 MHz AM / FM Function-Pulse Generators with 40MHz Frequency Counter

Operating Modes: Sine, Square, Triangle, Ramp, Pulse, TTLFrequency Range: 0.3 Hz - 3 MHz ( Square & Triangle) 0.3Hz - 2 MHz (Ramp, Pulse & TTL) , 1 Hz-10 MHz (Sine)Frequency Accuracy: ± 0.5 %Frequency Range & Menu Selection: Microcontroller basedSine Wave Distortion: 1 % (typical)Square WaveRise Time & Fall TimePulse Duty Cycle: 15 % to 85 % var. (min width 200 ns)Triangle Nonlinearity: 1% (typical)Output Impedance: 50 ΩOutput Voltage: 20 Vpp O.C.Attenuation: 20 or 40 dB(fixed) & 20 dB (variable)Level Flatness: Up to 300 KHz : ±0.2 dB

Up to 3 MHz: ±0.5 dBDC Offset: ±5 V adjustableInternal Sweep: 20 ms-4 s variableExternal Modulation: FM AM Std, AM Bal, FM, PWMModulation Frequency Range: DC to 20 KHzModulation Input: 2 Vpp max.Frequency Counter: Range: DC - 40 MHzResolution: 1 HzSensitivity: 0.5 VInput Impedance: 1 MΩGeneralMains Supply: 230 V ±10%, 50 Hz / 60 HzPower Consumption: 12 VA (approx.)Operating Temperature: 0 to 40°C, RH90%Learning Material: Necessary Instruction Manual - CD, Hard Copy

2 100 MHz Dual channel Digital Storage Oscilloscope

Maximum Input Voltage ±400VppTrigger Sources CH1, CH2, Ext, Ext /5, AC LineTrigger Modes Auto, Normal, SingleTrigger Type Edge, Pulse Width, Slope, Video, AlternateAuto Measure: Vpp, Vmax, Vmin, Vamp, Vtop, Vbase, Vavg, Mean, Crms, Vrms, ROVShoot,FOVShoot, RPREShoot, FPREShoot, Rise time, Fall time, Frequency Period,+ Wid, -Wid, +Dut, -Dut, BWid, Phase, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFFCursor Measure Manual, Track and Auto measure modeMaths +, – , ×, /, FFTWaveform Interpolation Sin x/x, LinearStorage Internal 2 reference waveforms, 20 waveforms and 20 SetupsUSB BMP, CSV, Waveforms, SetupsBandwidth 100MHzReal-time Sample Rate 500 MSa/s (Single Channel)

Equivalent Sample Rate 50GSa/sNumber of Channels 2 CH +1 ExtMemory Depth 32 Kpts (Single Channel)Acquisition Modes Normal/Average/Peak DetectAverage Selectable from 4 to 256Vertical Sensitivity 2mV/div - 10V/divVertical Resolution 8 bitsInput Impedance 1 MV ±2% II 17 pF ±3 pFInput Coupling DC, AC and GNDCommunication Port USB Host, USB Device, RS232, Pass/FailSample Types Real Time and Equivalent TimeFFT Window: Hanning, Hamming, Blackman, RectangularPersist Off, 1 sec, 2 sec, 5 sec, InfiniteMeasure Display Modes Main, Window, Window Zoom, Scan, X-YMenu Display 2 sec, 5 sec, 10 sec, 20 sec, InfiniteSkin SuccinctDisplay 7 inch TFT Color LCD DisplayPower 100 - 240V AC, 45Hz - 440Hz, 50VA MaxAccessories required 1:1/10:1 Probe (3 nos.), Power Cord, USB Cable, Easy Scope SoftwareOptional GPIB Communication Module, Serial Interface Communication Module,Pass/Fail Interface ModuleLearning Material: Necessary Instruction Manual - CD, Hard Copy

3 8085 Microprocessor Kit Expected Features:Diagrammatic representation of full systemTwo modes of commandHEX key pad modeSerial modeFacility of downloading and uploading the files from PCPowerful monitor programAll Address and Data lines are provided on 50 pin connectorBattery Backup for RAMThree channel Timer/Counter using 825324 I/O lines provided through 825522 I/O lines provided through 8155In built power supply / AdaptorLCD display for result.Technical SpecificationsOperating Frequency: 6.144MHzRAM: 8K, ROM: 8K, Input: 7 x 4 HEX keypad , Display: Seven segment, Mains supply: 90 - 230V AC, 50Hz, Fuse: 500mALearning Material: Necessary Instruction Manual - CD, Hard Copy

4 Adder and Subtractor Trainer Kit

Expected Features:Exclusive and compact designStraight forward representation of Universal GatesIn-built power supply/ Adaptor Designed by considering all the safety standardsProvided with an extensive manualLow cost trainer including illustration of logic gates as well as universal gatesLEDs for visual indication of input and output logic states SPDT switches for input logic selection

Technical SpecificationsInput: +5 V DCLogic levels: +5 V: HIGH (Logic 1)0 V: LOW (Logic 0)Scope of LearningStudy of Binary, Half Adder, Full Adder using two Half AddersHalf SubtractorLearning Material: Necessary Instruction Manual - CD, Hard Copy

5 Advanced Analog Circuits Development Platform & Analog Electronics teaching software

Expected Features:Self Contained and Easy to OperateFunctional Blocks indicated on board mimicOn board DC and AC Power SupplyOn board Function GeneratorOn board Continuity TesterOn board Toggle Switches and PotentiometersSolder less BreadboardOn Board Voltage/ Current/ Frequency MeasurementPC InterfaceProvide all ICs to perform experiments like 741 IC Timer 555 IC –each 10nos.Technical Specifications:DC Power Supplies: + 5V, 1 A (Fixed)+ 12V, 500 mA (Fixed)-12V, 500 mA (Fixed) + 12V, 500 mA (Variable)-12V, 500 mA (Variable)AC Supply: 9V-0V-9V, 500mABreadboard: Breadboard for making various circuits and testing them.External components/IC can be fitted conveniently.Function generator: Operating modes Sine, Square and Triangular.Frequency range: 1 Hz to 100 KHz.Volt/Current/Frequency: Voltage Range +12V to -12VMeasurement Current Range: 0 to 500mAFrequency Range DC to 100KHz (All with respect to Ground)PC Interface: Acquisition from two Analog input channels (Max. input 1 Volt)Continuity Tester: For testing the continuity provided with Beeper Sound.Power Supply: 110-220 V ±10%, 50/60Hz.Analog Electronics(Simulation software)The “Simulation software Analog Electronics”, comprising of simulations, animations, along with mandatory theory to understand fundamental concepts of Analog Electronics.Learning Material: Necessary Instruction Manual - CD, Hard Copy

6 Advanced Digital Workstation

Expected Features:It should be easy to operateGraphical LCD to show the menu of experiment and gate level diagram for selected experimentsSolder less breadboardOn Board DC Power SupplyOn board Pulse GeneratorOnline Simulation, Teaching & Learning Software on Digital ElectronicsShould be housed in compact and light weight enclosure like laptop Designed on FGPA IC Based

Should be able to perform all Digital electronics experiments on single boardProvide all relevant ICs and connecting wires.Technical Specifications:Size of Breadboard (mm): 172.5 x 128.5DC Supply: +5 V/1 A +12V/1AClock Frequency : 1 Hz, 100 Hz, 1 KHz, 100 KHzAmplitude : 3.3 V (TTL)Duty cycle : 50 %Graphical LCD : 128 X 64 dotsLED display: 8 Nos. (TTL)Seven Segment Display: 3 Nos.Pulser Switches: 2 Nos.Data switches: 12 Nos. (Toggle switches for both TTL modes)Power Supply: 100V - 240V AC, 50/60HzThe software should meet following Key Features:The Board should comprise of Online Simulation, Teaching-Learning Software on Digital Electronics. Learning Material: Necessary Instruction Manual - CD, Hard Copy

7 Analog-Digital Circuits Development Platform

Technical Specifications of main unit:Size of Breadboard: 172.5 mm x 128.5 mmConnections on Breadboard: 1685DC Power Supply: +5 V; l A, -5 V; 500 mA,+3 V to +15 V; 500 mA(variable); -3 V to -15 V; 500 mA (variable)LED Display: 8 nos. (TTL/ CMOS Mode)BCD to Seven Segment Display: 2 nos.Logic Probe: Logic level indicator for TTL/ CMOS (7 Segment)Power Supply: 110-220 V ± 10%, 50/60 HzPulse Generator: 1Hz to 1MHz in 6 steps Variable in between stepsAmplitude: 3 V-15 V (CMOS), 5V (TTL) Duty cycle: 50 %, TTL/CMOS outputPulse Switches: 2 nos. (Push to ‘On’)Data Switches: 10 nos. (Toggle switches for both TTL & CMOS mode)The software should meet following Key Features:The Board should comprise with Online Simulation, Teaching & Learning Software on Digital Electronics. The software should introduce the fundamental concepts of digital systems and relevant examples for quick understanding of students along with the simplified theory. Learning Material: Necessary Instruction Manual - CD, Hard Copy

8 Counters Trainer Kit Expected Features:Stand Alone systemEasy illustration of different types of countersLEDs for visual indication of input and output logic statesSPDT switches for input logic selectionIn-built power supply/ AdaptorTechnical SpecificationsInput: +5 V DCLogic levels: +5 V: HIGH (Logic 1)0 V: LOW (Logic 0)LED Indication : LED will be ON for logic high or '1' state and will be OFF for logic low or '0'stateScope of Learning

Study of 4-bit synchronous binary up Counter4-bit asynchronous binary up/down CounterVerification of operation of IC 74LS190 as a modulo-N programmable CounterLearning Material: Necessary Instruction Manual - CD, Hard Copy

9 Flip-Flop Trainer Kit Expected Features:Exclusive and compact design with kit coverAdaptable illustration of Flip-FlopsIn-built power supply/ AdaptorLEDs for visual indication of input and output logic states & carry out logics SPDT switches for input logic selectionDesigned, considering all the safety standardsTechnical SpecificationsInput: +5 V DCLogic levels: +5 V: HIGH (Logic 1)0 V: LOW (Logic 0)LED Indication : LED will be ON (glow) for logic high or '1' state and will be OFF for logic low or '0'stateScope of LearningStudy and verification of transition table ofS-R Flip-Flop , J-K Flip-Flop , D Flip-Flop , T Flip-Flop Learning Material: Necessary Instruction Manual - CD, Hard Copy

10 Interfacing Module for Microprocessor Kit

8253 Programmable Internal Timer8155 Programmable I/O & Timer8255 Programmable Peripheral interface8251 Programmable commutation interface8×8 LED Matrix DisplaySeven Segment Display, 16×2 LCD DisplayStepper Motor Controller8 Channel 8 Bit ADC., 2 Channel 8 Bit DACTraffic Light ControllerTemperature MeasurementExpected FeaturesFRC connector should be provided for each modulesProvide cable / connector.Scope of learning:Generate a square wave and rectangular wave of given frequency at the Output pin of 8255 chip.A program to display real time clock. Assume a periodic signal is interrupting RST 7.5 signal after every 0.5 secondsLearning Material: Necessary Instruction Manual - CD, Hard Copy

11 Multiplexer and De-multiplexer Trainer Kit

Expected Features:In-built power supply/ AdaptorEasy illustration of Multiplexer and De-multiplexerLEDs for visual indication of inputs and outputs statusSPDT switches for logic selectionGood quality, reliable sockets should be provided at appropriate places on board for connectionsTechnical SpecificationsInput: +5 V DCLogic levels: +5 V: HIGH (Logic 1), 0 V: LOW (Logic 0)

LED Indication : LED will be ON (glow) for logic high or '1' state and will be OFF for logic low or '0'stateScope of LearningStudy and verification of truth table of4-to-1 Line Multiplexer., 1-to-4 Line De-MultiplexerLearning Material: Necessary Instruction Manual - CD, Hard Copy

12 Operational Amplifier Lab Technical Specifications:Mains power supply: 90 - 270V ±10%, 50Hz (SMPS)Fixed DC power supply: +12V, Regulated-12V, Regulated+5V, Regulated -5V, RegulatedVariable DC power supply: +1.5V to +10V Regulated using LM317: -1.5V to -10V Regulated using : LM337 Function GeneratorSine Wave Frequency: 1KHz to 100KHz Frequency Control: 100KV, 10 turn PotentiometerAmplitude: 0V to 5VppAmplitude Control: 100KV, Single turn PotentiometerTriangular Wave Frequency: 1KHz to 100KHz Frequency Control: 100KV, 10 turn PotentiometerAmplitude: 0V to 5VppAmplitude Control: 100KV, Single turn PotentiometerSquare Wave Frequency: 1KHz to 100KHz Frequency Control: 100KV, 10 turn PotentiometerAmplitude: 5Vpp, fixedBread Board Dimension(mm): 175 x 61 x 10Distribution strips: 2, Distribution holes: 200, Terminal holes: 640Op-amp: IC uA741 (2 Nos.) : All pins terminated on 2 mm Banana SocketsConnecting Wire: 50 nos.Supply Voltage: ±22V max.Differential Input Voltage: ±30V max.Input Voltage: ±15V max.Slew Rate: 0.5 V/µs (VCC = ±15V)Provide all ICs to perform experiments listed below –each 07 nos. Diode 1N 4007: 2 nos.Capacitor Bank: each 5 nos., Electrolyte Cap. 1mf/63V Disc cap. 1nf/63V, Disc cap. 10nf/63V, Disc cap. 100nf/63VResistor Bank : SMD Resistance 1KV1% 1/4W (5 Nos.)SMD Resistance 10KV1% 1/4W (5 Nos.)SMD Resistance 100KV1% 1/4W (5 Nos.)Variable Resistance bank1KVSingle turn Potentiometer (2 Nos.)10KVSingle turn Potentiometer (2 Nos.)100KVSingle turn Potentiometer (2 Nos.)1MVSingle turn Potentiometer (2 Nos.)Fuse : 500mA, slow blowAnalog Electronics(Simulation software)The “Simulation software Analog Electronics”, comprising of simulations, animations, along with mandatory theory to understand fundamental concepts of Analog Electronics.Learning Material: Necessary Instruction Manual - CD, Hard Copy

13 Parallel Adder and Subtractor Trainer Kit

Expected Features:4-bit/8-bit Binary Addition & SubtractionEasy switching between addition and subtraction modesIn-built power supply/ AdaptorLEDs for visual indication of input and output logic states & carry out logics SPDT switches for input logic selectionTechnical SpecificationsInput: +5 V DC, Logic levels: +5 V: HIGH (Logic 1)0 V: LOW (Logic 0)LED Indication : LED will be ON for logic high or'1' state and will be OFF for logic low or '0'stateScope of LearningStudy of4-bit binary addition and subtraction operation 8-bit binary addition and subtraction operationLearning Material: Necessary Instruction Manual - CD, Hard Copy

14 Ready to Use Board with detachable modules.

Modules Unit a) Logic Gatesb) Universal Gate- NAND/NORc) EX-OR Gate Implementationd) Demorgan's Theoreme) EX-OR Gate Applicationf) Code Conversion (Binary to Gray & Gray to Binary)g) Code Conversion (BCD to Excess-3 code)h) Binary Adder -Subtractori) Encoder - Decoderj) Multiplexer – De-multiplexerk) Flip-Flops (R-S, D, J-K,T)l) Bit Synchronous Binary Counterm) BCD to 7- Segment Decodern) Digital to Analog Converter (R -2 R ladder)o) Analog to digital converter (Counter Type)p) Mono-stable Multi-vibratorsq) Adder/ Subtractor (4 bit / 8 bit)r) Decoder / De-multiplexers) Shift register (4 bit SIPO)t) Transfer characteristics (TTL and CMOS Inverters)Learning Material: Necessary Instruction Manual - CD, Hard Copy

15 Shift Registers Trainer Kit Expected Features:Stand alone systemEasy illustration of all types of 3-bit and 4-bit shift registersLEDs for visual indication of input and output logic statesSPDT switches for easy input logic selectionIn-built power supply/AdaptorTechnical SpecificationsInput: +5 V DCLogic levels: +5 V: HIGH (Logic 1)0 V: LOW (Logic 0)LED Indication : LED will be ON for logic high or '1' state and will be OFF for logic low or '0'stateScope of LearningStudy of

3-bit and 4-bit serial in serial out shift register3-bit and 4-bit serial in parallel out shift register3-bit and 4-bit parallel in serial out shift register3-bit and 4-bit parallel in parallel out shift registerLearning Material: Necessary Instruction Manual - CD, Hard Copy

16 SOP & POS Implementation Trainer Kit

Expected Features:Stand alone system In-built power supply/ Adaptor Easy illustration of different types of canonical forms LEDs for visual indication of input and output logic states SPDT switches for input logic selectionTechnical SpecificationsDC Power Supply: +5 V DC Logic levels: +5 V: High (Logic 1), 0 V: Low (Logic 0)LED Indication : LED will be ON for logic high or'1' state and will be OFF for logic low or '0'stateScope of Learning Study of Boolean function in different canonical forms.Study of Quine Mclusky method and realize its NOR-OR implementation.Learning Material: Necessary Instruction Manual - CD, Hard Copy

17 Understanding and Experimentation with Digital ICs

Expected Features:Illustration of Combinational and Sequential circuits ZIF Socket provide for easy connectionsSimultaneous use of multiple ICsProvide all relevant ICs and connecting wires.Compact size with Kit-coverTechnical SpecificationsMains Supply: 90 V - 250 V, 50 HzFixed DC Power Supply: +12 V, -12 V, +5 V, -5 VFixed TTL Generator: 1 Hz, 10 Hz, 100 Hz, 1KHz,10 KHz and 100 KHzPulse Generator: 5 VZIF Socket: 20 Pins (6 Nos.) 40 Pins (1 No.)Input Section: 12 toggle switchesOutput Section: 12 LED indicatorsLearning Material: Necessary Instruction Manual - CD, Hard Copy

18 Understanding Microprocessor 8085 Kit

Expected Features:Diagrammatic representation of full systemPowerful monitor programBattery backup for RAMThree channel Timer/counter using 825348 I/O lines using 8255On board EPROM programmer for 27 seriesOn board 8 channel 8 bit ADCOn board 8 bit 2 Channel DACFacility of downloading and uploading the files from PC through PC SoftwarePC Software with features like sending commands to Microprocessor Trainer Kit, user can change the RAM Data & change the location of RAM DataTwo command mode interfaceASCII KeyboardSerial Mode

+ 12V, + 5V – 500mA SMPS Based Power supply on board All Address and Control lines are available on 50 pin ConnectorOnline Simulation, Teaching & Learning Software on MicroprocessorMicroprocessor kit should be interface with the modulesTechnical Specifications:Operating Frequency: 6.144 MHzROM: 8 K, RAM: 8 KInput: ASCII KeyboardDisplay: 20 X 2 LCDMains supply (SMPS):90 - 230 V AC, 50 HzThe trainer kit should provideDigital Input Output, Seven Segment Display , Stepper Motor Controller, DC Motor Controller, Traffic Light Controller, Temperature Measurement, Relay & OPTO Coupler, Elevator Simulator, Thumb Wheel SwitchModules Should have following features & Technical SpecificationsShould compatible with 8085 Microprocessor TrainerLearning Material with theory, procedure, results, programs etc.Interface : 26 Pin FRCOperating Voltage : +5V,+/- 12VThe online learning, teaching & simulation software should have following Key Features:It should provide basic information about 8085 microprocessor and peripherals. The software should act as a self-study package with easy-to-navigate interface, explaining difficult electronics concepts by analogies, flash animations and examples and cover topics like architecture of a 8-bit, Microprocessor, assembly Language Programming, Special Purpose Programmable Peripheral Devices and Their Interfacing Topics with Programmable Interval Timer (8253/8254), Programmable Interrupt Controller (8259), Keyboard/Display Controller (8279), Programmable Communication Interface (8251), DMA Controller (8237/8257), Microprocessor Applications.Learning Material: Necessary Instruction Manual - CD, Hard Copy

19 Universal Gates Trainer Kit Features:Exclusive and compact designStraight forward representation of Universal GatesIn-built power supply/ Adaptor Designed by considering all the safety standardsProvided with an extensive manualLow cost trainer including illustration of logic gates as well as universal gatesLEDs for visual indication of input and output logic states SPDT switches for input logic selectionTechnical SpecificationsInput: +5V DC, Logic levels: +5 V: HIGH (Logic 1)0 V: LOW (Logic 0)Scope of Learning:Designing ofNOT gate using NAND gate, AND gate using NAND gateOR gate using NAND gate, NOT gate using NOR gateAND gate using NOR gate, OR gate using NOR gatLearning Material: Necessary Instruction Manual - CD, Hard Copy

20 Universal IC Tester Tests most of the 6 to 40 pin ICs in DIP package. The list includes 74/54, 40/45, 93/96 series ICs, EPROMs, RAMs, peripheral ICs, microprocessor (8088/8085/Z80/6502), operational amplifiers, voltage comparators, transistor arrays, optocouplers, analog switches, voltage followers, timers, A to D converters, D to A converters and miscellaneous analog ICs.9 Digit Seven Segment DisplayAutomatic testing of variety of ICs. Potential free ZIF socket for testing analog ICs and universal ZIF socket for testing digital ICs are provided.16 character x2 line LCD dot matrix display and 16 keys keyboard for easy operation. Single step mode enables the user to test the IC step by step.Self test facility to test the internal modules of the IC tester automatically at power on and also through 'SELF TEST' key of the keyboard.Audio alarm to user whenever it is required. Test a wide range of Digital IC's such as 74 Series, 40/45 Series of CMOS IC’sTest Microprocessors 8085, 8086, Z80Test Peripherals like 8255, 8279, 8253, 8259, 8251, 8155, 6264, 62256, 8288, 8284.Test 7 segment display of common cathode & common anode typeAuto search facility of IC’sTest by Truth table/sequence table comparison40 pin DIP ZIF sockets provided28 Touch Keypad with numerical & functional keysAutomatic testing of IC after and Without entering the IC number No wiring is required.Continuous mode of testing ICs until aborted. Number of times the test was successful is displayed.Step mode to locate the faulty pin. Step number and faulty pin number display.Backspace clear select option and number keys for editing IC numberRemembers the IC number for repeated testing of same IC.Self test facility during power-on and through keyboard.All Digital and Analog Families ICs testing facilityHelp key for short description of the various key function.Socket for easy insertion and removal of ICs under test and component holder to hold components.Computer Interface through RS232C for enhancement of IC test libraryBuzzer to indicate bad IC.Learning Material: Necessary Instruction Manual - CD, Hard Copy

FORMAT FOR QUOTATION SUBMISSION

(In letterhead of the supplier with seal)

Date: _______________

To:

____________________________

____________________________

Sl.

No.

Description of

goods (with full

Specifications)

Qty. Unit Quoted Unit rate in Rs.

(Including Ex Factory price, excise duty, packing and

forwarding, transportation, insurance, other local

costs incidental to delivery and warranty/ guaranty

commitments)

Total Price

(A)

GST payable

In

%

In figures

(B)

Total Cost

Gross Total Cost (A+B): Rs. ________________

We agree to supply the above goods in accordance with the technical specifications for a total contract price of Rs. ———————— (Amount in

figures) (Rupees ————————amount in words) within the period specified in the Invitation for Quotations.

We confirm that the normal commercial warranty/ guarantee of ——————— months shall apply to the offered items and we also confirm to

agree with terms and conditions as mentioned in the Invitation Letter.

We hereby certify that we have taken steps to ensure that no person acting for us or on our behalf will engage in bribery.

Signature of Supplier

Name: __________________

Address: __________________

Contact No: ______________