UNIT 311 Repair And Rebuild

First we put on the lab jacket and the anti-static wrist band, you also ways have to put the anti-static wrist on your right hand with the metal touching your skin

Then we took off the case

This is inside of the PC

UNIT 311 Repair And Rebuild

There is no RAM in the PC

So I got a piece of RAM and put it into the RAM slot

The next problem I seen was that the cable to link the PC and monitor was in

UNIT 311 Repair And Rebuild

This is a circuit breaker it will cut off the power if there is a serge, it is there to protect you from getting electrocuted

You have to press reset

And then test

UNIT 311 Repair And Rebuild

The power cable didn’t have a fuse in it so I put one in

Next I plugged in the keyboard and mouse and then turned the monitor and the computer on

UNIT 311 Repair And Rebuild

Then you can plug in the power cable and turn it on. But my machine wouldn’t turn on

This is windows

Now we shut windows down to take the PC apart

UNIT 311 Repair And Rebuild

Then windows started up

This is me using the screw driver to undo the disk drive

And then I started unplugging the cables in the PC

UNIT 311 Repair And Rebuild

This is a screw driver This is a screw driver

This is the motherboard and the fan which we took out as well

This is all the components part 1

This is all the components part 2

UNIT 311 Repair And Rebuild

Then we had to put the PC back together

Put the case back on and turn the PCon again

And then finally we started windows again

UNIT 311 Repair And Rebuild