VIP Workshop Series

Russound & OmniProIIIntegration

April, 2005

Leadership in Price/Performance

The Omni Family

North America’s Best Selling Integrated Systems

Integrated architectural lighting control

Enhanced security and fire protection

Seamless HVAC control

Voice prompted telephone interface, with built-in voice and digital dialers

PC connectivity via Ethernet, serial interface and modem

Web-Link II Internet access

Home Control for MCE

OmniPro II

Russound Integration

Plug and Playwith OmniPro II and OmniTouch

Russound CAV 6.6

Russound CAM

www.russound.com

What you need

OmniPro II and OmniTouch

HAI P/N 36A05-4 Serial Connectivity Kit (cable and connector for audio systems)

Russound CAV6.6 - or - Russound CAM

Optional: Russound sources, such as tuners and other source

equipment

Installation

Connect Russound serial port to unused serial port on OmniPro II.

Set Serial Port Function to RUSSOUND.

Program Audio Source Names and Audio Zone Names into OmniPro II

Audio Button pops up. Enjoy!

Operation

Tap Audio button Display shows zone

name, volume, source and what’s playing

Select Source Select Zone you want

to control Operate buttons as you

would an Uno S2 keypad

Audio Source selection menu

OmniPro II Audio Source Names

Set-Up Source Names to correspond with Source Names for the Russound

Start at Unit 457 in OmniPro II for Source Names Example:

Russound OmniPro II

Source 1 AM/FM Tuner Unit 457 AM/FM Tuner

Source 2 XM Tuner Unit 458 XM Tuner

Source 3 Home Theater Unit 459 Home Theater

Source 4 CD Player Unit 460 CD Player

Source 5 Satellite Unit 461 Satellite

OmniPro II Audio Zone Names

Set-Up Zone Names to correspond with audio zones for the Russound

Start at Unit 473 in OmniPro II Example:

Russound OmniPro II

Zone 1 Living Room Unit 473 Living Room

Zone 2 Den Unit 474 Den

Zone 3 Kitchen Unit 475 Kitchen

Zone 4 Patio Unit 476 Patio

Zone 5 Master Bedrm Unit 477 Master Bedrm

Zone 6 Master Bath Unit 478 Master Bath

Programming

New Commands for Audio Systems in OmniPro II ACP

Benefits: Set Up a button (macro) for Entertaining, Watch TV, etc.,

setting volume and source of all zones as needed Outdoor speakers programmed off at night to prevent

unintentionally disturbing neighbors Bed/Bath speakers off when bedtime so kids don’t wake you

up accidentally Set individual preferences when arriving home

Programming

Audio features require PCAccess for programming

New ACP Commands include: On, Off, mute for individual zones or all zones Volume of specified zone, 0-100% Select Audio Source for specified zone Key Press – simulate key press for audio system keypad

EXAMPLE:

WHEN Bob is Home: Den AUDIO ON

WHEN Bob is Home: Den AUDIO VOLUME 40%

WHEN Bob is Home: Den AUDIO SOURCE CD Player

WHEN Bob is Home: Den AUDIO KEY PRESS PLAY

Updating Existing HAI Systems

Install 20A04-2 OmniPro II firmware update chip 2.9 or later

Get PCAccess version 2.9 or later

Get p/n 32I09-1 OmniTouch Loader Kit to add new screens to OmniTouch (can be done in field)

More Info: OmniPro II Version 2.9 Firmware Release Owner’s and Installer’s documents on web site

32I09-1 includes cable, software and instructions for updating OmniTouch from

the front, even after installation

Thanks forAttending!

We hope HAI can be a profitable part of your future!